r820t.c revision 25cf4d462abd6d78d224b564de82dcdab7973673
1/* 2 * Rafael Micro R820T driver 3 * 4 * Copyright (C) 2013 Mauro Carvalho Chehab <mchehab@redhat.com> 5 * 6 * This driver was written from scratch, based on an existing driver 7 * that it is part of rtl-sdr git tree, released under GPLv2: 8 * https://groups.google.com/forum/#!topic/ultra-cheap-sdr/Y3rBEOFtHug 9 * https://github.com/n1gp/gr-baz 10 * 11 * From what I understood from the threads, the original driver was converted 12 * to userspace from a Realtek tree. I couldn't find the original tree. 13 * However, the original driver look awkward on my eyes. So, I decided to 14 * write a new version from it from the scratch, while trying to reproduce 15 * everything found there. 16 * 17 * TODO: 18 * After locking, the original driver seems to have some routines to 19 * improve reception. This was not implemented here yet. 20 * 21 * RF Gain set/get is not implemented. 22 * 23 * This program is free software; you can redistribute it and/or modify 24 * it under the terms of the GNU General Public License as published by 25 * the Free Software Foundation; either version 2 of the License, or 26 * (at your option) any later version. 27 * 28 * This program is distributed in the hope that it will be useful, 29 * but WITHOUT ANY WARRANTY; without even the implied warranty of 30 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 31 * GNU General Public License for more details. 32 * 33 */ 34 35#include <linux/videodev2.h> 36#include <linux/mutex.h> 37#include <linux/slab.h> 38#include <linux/bitrev.h> 39#include <asm/div64.h> 40 41#include "tuner-i2c.h" 42#include "r820t.h" 43 44/* 45 * FIXME: I think that there are only 32 registers, but better safe than 46 * sorry. After finishing the driver, we may review it. 47 */ 48#define REG_SHADOW_START 5 49#define NUM_REGS 27 50#define NUM_IMR 5 51#define IMR_TRIAL 9 52 53#define VER_NUM 49 54 55static int debug; 56module_param(debug, int, 0644); 57MODULE_PARM_DESC(debug, "enable verbose debug messages"); 58 59/* 60 * enums and structures 61 */ 62 63enum xtal_cap_value { 64 XTAL_LOW_CAP_30P = 0, 65 XTAL_LOW_CAP_20P, 66 XTAL_LOW_CAP_10P, 67 XTAL_LOW_CAP_0P, 68 XTAL_HIGH_CAP_0P 69}; 70 71struct r820t_sect_type { 72 u8 phase_y; 73 u8 gain_x; 74 u16 value; 75}; 76 77struct r820t_priv { 78 struct list_head hybrid_tuner_instance_list; 79 const struct r820t_config *cfg; 80 struct tuner_i2c_props i2c_props; 81 struct mutex lock; 82 83 u8 regs[NUM_REGS]; 84 u8 buf[NUM_REGS + 1]; 85 enum xtal_cap_value xtal_cap_sel; 86 u16 pll; /* kHz */ 87 u32 int_freq; 88 u8 fil_cal_code; 89 bool imr_done; 90 91 struct r820t_sect_type imr_data[NUM_IMR]; 92 93 /* Store current mode */ 94 u32 delsys; 95 enum v4l2_tuner_type type; 96 v4l2_std_id std; 97 u32 bw; /* in MHz */ 98 99 bool has_lock; 100}; 101 102struct r820t_freq_range { 103 u32 freq; 104 u8 open_d; 105 u8 rf_mux_ploy; 106 u8 tf_c; 107 u8 xtal_cap20p; 108 u8 xtal_cap10p; 109 u8 xtal_cap0p; 110 u8 imr_mem; /* Not used, currently */ 111}; 112 113#define VCO_POWER_REF 0x02 114#define DIP_FREQ 32000000 115 116/* 117 * Static constants 118 */ 119 120static LIST_HEAD(hybrid_tuner_instance_list); 121static DEFINE_MUTEX(r820t_list_mutex); 122 123/* Those initial values start from REG_SHADOW_START */ 124static const u8 r820t_init_array[NUM_REGS] = { 125 0x83, 0x32, 0x75, /* 05 to 07 */ 126 0xc0, 0x40, 0xd6, 0x6c, /* 08 to 0b */ 127 0xf5, 0x63, 0x75, 0x68, /* 0c to 0f */ 128 0x6c, 0x83, 0x80, 0x00, /* 10 to 13 */ 129 0x0f, 0x00, 0xc0, 0x30, /* 14 to 17 */ 130 0x48, 0xcc, 0x60, 0x00, /* 18 to 1b */ 131 0x54, 0xae, 0x4a, 0xc0 /* 1c to 1f */ 132}; 133 134/* Tuner frequency ranges */ 135static const struct r820t_freq_range freq_ranges[] = { 136 { 137 .freq = 0, 138 .open_d = 0x08, /* low */ 139 .rf_mux_ploy = 0x02, /* R26[7:6]=0 (LPF) R26[1:0]=2 (low) */ 140 .tf_c = 0xdf, /* R27[7:0] band2,band0 */ 141 .xtal_cap20p = 0x02, /* R16[1:0] 20pF (10) */ 142 .xtal_cap10p = 0x01, 143 .xtal_cap0p = 0x00, 144 .imr_mem = 0, 145 }, { 146 .freq = 50, /* Start freq, in MHz */ 147 .open_d = 0x08, /* low */ 148 .rf_mux_ploy = 0x02, /* R26[7:6]=0 (LPF) R26[1:0]=2 (low) */ 149 .tf_c = 0xbe, /* R27[7:0] band4,band1 */ 150 .xtal_cap20p = 0x02, /* R16[1:0] 20pF (10) */ 151 .xtal_cap10p = 0x01, 152 .xtal_cap0p = 0x00, 153 .imr_mem = 0, 154 }, { 155 .freq = 55, /* Start freq, in MHz */ 156 .open_d = 0x08, /* low */ 157 .rf_mux_ploy = 0x02, /* R26[7:6]=0 (LPF) R26[1:0]=2 (low) */ 158 .tf_c = 0x8b, /* R27[7:0] band7,band4 */ 159 .xtal_cap20p = 0x02, /* R16[1:0] 20pF (10) */ 160 .xtal_cap10p = 0x01, 161 .xtal_cap0p = 0x00, 162 .imr_mem = 0, 163 }, { 164 .freq = 60, /* Start freq, in MHz */ 165 .open_d = 0x08, /* low */ 166 .rf_mux_ploy = 0x02, /* R26[7:6]=0 (LPF) R26[1:0]=2 (low) */ 167 .tf_c = 0x7b, /* R27[7:0] band8,band4 */ 168 .xtal_cap20p = 0x02, /* R16[1:0] 20pF (10) */ 169 .xtal_cap10p = 0x01, 170 .xtal_cap0p = 0x00, 171 .imr_mem = 0, 172 }, { 173 .freq = 65, /* Start freq, in MHz */ 174 .open_d = 0x08, /* low */ 175 .rf_mux_ploy = 0x02, /* R26[7:6]=0 (LPF) R26[1:0]=2 (low) */ 176 .tf_c = 0x69, /* R27[7:0] band9,band6 */ 177 .xtal_cap20p = 0x02, /* R16[1:0] 20pF (10) */ 178 .xtal_cap10p = 0x01, 179 .xtal_cap0p = 0x00, 180 .imr_mem = 0, 181 }, { 182 .freq = 70, /* Start freq, in MHz */ 183 .open_d = 0x08, /* low */ 184 .rf_mux_ploy = 0x02, /* R26[7:6]=0 (LPF) R26[1:0]=2 (low) */ 185 .tf_c = 0x58, /* R27[7:0] band10,band7 */ 186 .xtal_cap20p = 0x02, /* R16[1:0] 20pF (10) */ 187 .xtal_cap10p = 0x01, 188 .xtal_cap0p = 0x00, 189 .imr_mem = 0, 190 }, { 191 .freq = 75, /* Start freq, in MHz */ 192 .open_d = 0x00, /* high */ 193 .rf_mux_ploy = 0x02, /* R26[7:6]=0 (LPF) R26[1:0]=2 (low) */ 194 .tf_c = 0x44, /* R27[7:0] band11,band11 */ 195 .xtal_cap20p = 0x02, /* R16[1:0] 20pF (10) */ 196 .xtal_cap10p = 0x01, 197 .xtal_cap0p = 0x00, 198 .imr_mem = 0, 199 }, { 200 .freq = 80, /* Start freq, in MHz */ 201 .open_d = 0x00, /* high */ 202 .rf_mux_ploy = 0x02, /* R26[7:6]=0 (LPF) R26[1:0]=2 (low) */ 203 .tf_c = 0x44, /* R27[7:0] band11,band11 */ 204 .xtal_cap20p = 0x02, /* R16[1:0] 20pF (10) */ 205 .xtal_cap10p = 0x01, 206 .xtal_cap0p = 0x00, 207 .imr_mem = 0, 208 }, { 209 .freq = 90, /* Start freq, in MHz */ 210 .open_d = 0x00, /* high */ 211 .rf_mux_ploy = 0x02, /* R26[7:6]=0 (LPF) R26[1:0]=2 (low) */ 212 .tf_c = 0x34, /* R27[7:0] band12,band11 */ 213 .xtal_cap20p = 0x01, /* R16[1:0] 10pF (01) */ 214 .xtal_cap10p = 0x01, 215 .xtal_cap0p = 0x00, 216 .imr_mem = 0, 217 }, { 218 .freq = 100, /* Start freq, in MHz */ 219 .open_d = 0x00, /* high */ 220 .rf_mux_ploy = 0x02, /* R26[7:6]=0 (LPF) R26[1:0]=2 (low) */ 221 .tf_c = 0x34, /* R27[7:0] band12,band11 */ 222 .xtal_cap20p = 0x01, /* R16[1:0] 10pF (01) */ 223 .xtal_cap10p = 0x01, 224 .xtal_cap0p = 0x00, 225 .imr_mem = 0, 226 }, { 227 .freq = 110, /* Start freq, in MHz */ 228 .open_d = 0x00, /* high */ 229 .rf_mux_ploy = 0x02, /* R26[7:6]=0 (LPF) R26[1:0]=2 (low) */ 230 .tf_c = 0x24, /* R27[7:0] band13,band11 */ 231 .xtal_cap20p = 0x01, /* R16[1:0] 10pF (01) */ 232 .xtal_cap10p = 0x01, 233 .xtal_cap0p = 0x00, 234 .imr_mem = 1, 235 }, { 236 .freq = 120, /* Start freq, in MHz */ 237 .open_d = 0x00, /* high */ 238 .rf_mux_ploy = 0x02, /* R26[7:6]=0 (LPF) R26[1:0]=2 (low) */ 239 .tf_c = 0x24, /* R27[7:0] band13,band11 */ 240 .xtal_cap20p = 0x01, /* R16[1:0] 10pF (01) */ 241 .xtal_cap10p = 0x01, 242 .xtal_cap0p = 0x00, 243 .imr_mem = 1, 244 }, { 245 .freq = 140, /* Start freq, in MHz */ 246 .open_d = 0x00, /* high */ 247 .rf_mux_ploy = 0x02, /* R26[7:6]=0 (LPF) R26[1:0]=2 (low) */ 248 .tf_c = 0x14, /* R27[7:0] band14,band11 */ 249 .xtal_cap20p = 0x01, /* R16[1:0] 10pF (01) */ 250 .xtal_cap10p = 0x01, 251 .xtal_cap0p = 0x00, 252 .imr_mem = 1, 253 }, { 254 .freq = 180, /* Start freq, in MHz */ 255 .open_d = 0x00, /* high */ 256 .rf_mux_ploy = 0x02, /* R26[7:6]=0 (LPF) R26[1:0]=2 (low) */ 257 .tf_c = 0x13, /* R27[7:0] band14,band12 */ 258 .xtal_cap20p = 0x00, /* R16[1:0] 0pF (00) */ 259 .xtal_cap10p = 0x00, 260 .xtal_cap0p = 0x00, 261 .imr_mem = 1, 262 }, { 263 .freq = 220, /* Start freq, in MHz */ 264 .open_d = 0x00, /* high */ 265 .rf_mux_ploy = 0x02, /* R26[7:6]=0 (LPF) R26[1:0]=2 (low) */ 266 .tf_c = 0x13, /* R27[7:0] band14,band12 */ 267 .xtal_cap20p = 0x00, /* R16[1:0] 0pF (00) */ 268 .xtal_cap10p = 0x00, 269 .xtal_cap0p = 0x00, 270 .imr_mem = 2, 271 }, { 272 .freq = 250, /* Start freq, in MHz */ 273 .open_d = 0x00, /* high */ 274 .rf_mux_ploy = 0x02, /* R26[7:6]=0 (LPF) R26[1:0]=2 (low) */ 275 .tf_c = 0x11, /* R27[7:0] highest,highest */ 276 .xtal_cap20p = 0x00, /* R16[1:0] 0pF (00) */ 277 .xtal_cap10p = 0x00, 278 .xtal_cap0p = 0x00, 279 .imr_mem = 2, 280 }, { 281 .freq = 280, /* Start freq, in MHz */ 282 .open_d = 0x00, /* high */ 283 .rf_mux_ploy = 0x02, /* R26[7:6]=0 (LPF) R26[1:0]=2 (low) */ 284 .tf_c = 0x00, /* R27[7:0] highest,highest */ 285 .xtal_cap20p = 0x00, /* R16[1:0] 0pF (00) */ 286 .xtal_cap10p = 0x00, 287 .xtal_cap0p = 0x00, 288 .imr_mem = 2, 289 }, { 290 .freq = 310, /* Start freq, in MHz */ 291 .open_d = 0x00, /* high */ 292 .rf_mux_ploy = 0x41, /* R26[7:6]=1 (bypass) R26[1:0]=1 (middle) */ 293 .tf_c = 0x00, /* R27[7:0] highest,highest */ 294 .xtal_cap20p = 0x00, /* R16[1:0] 0pF (00) */ 295 .xtal_cap10p = 0x00, 296 .xtal_cap0p = 0x00, 297 .imr_mem = 2, 298 }, { 299 .freq = 450, /* Start freq, in MHz */ 300 .open_d = 0x00, /* high */ 301 .rf_mux_ploy = 0x41, /* R26[7:6]=1 (bypass) R26[1:0]=1 (middle) */ 302 .tf_c = 0x00, /* R27[7:0] highest,highest */ 303 .xtal_cap20p = 0x00, /* R16[1:0] 0pF (00) */ 304 .xtal_cap10p = 0x00, 305 .xtal_cap0p = 0x00, 306 .imr_mem = 3, 307 }, { 308 .freq = 588, /* Start freq, in MHz */ 309 .open_d = 0x00, /* high */ 310 .rf_mux_ploy = 0x40, /* R26[7:6]=1 (bypass) R26[1:0]=0 (highest) */ 311 .tf_c = 0x00, /* R27[7:0] highest,highest */ 312 .xtal_cap20p = 0x00, /* R16[1:0] 0pF (00) */ 313 .xtal_cap10p = 0x00, 314 .xtal_cap0p = 0x00, 315 .imr_mem = 3, 316 }, { 317 .freq = 650, /* Start freq, in MHz */ 318 .open_d = 0x00, /* high */ 319 .rf_mux_ploy = 0x40, /* R26[7:6]=1 (bypass) R26[1:0]=0 (highest) */ 320 .tf_c = 0x00, /* R27[7:0] highest,highest */ 321 .xtal_cap20p = 0x00, /* R16[1:0] 0pF (00) */ 322 .xtal_cap10p = 0x00, 323 .xtal_cap0p = 0x00, 324 .imr_mem = 4, 325 } 326}; 327 328static int r820t_xtal_capacitor[][2] = { 329 { 0x0b, XTAL_LOW_CAP_30P }, 330 { 0x02, XTAL_LOW_CAP_20P }, 331 { 0x01, XTAL_LOW_CAP_10P }, 332 { 0x00, XTAL_LOW_CAP_0P }, 333 { 0x10, XTAL_HIGH_CAP_0P }, 334}; 335 336/* 337 * measured with a Racal 6103E GSM test set at 928 MHz with -60 dBm 338 * input power, for raw results see: 339 * http://steve-m.de/projects/rtl-sdr/gain_measurement/r820t/ 340 */ 341 342static const int r820t_lna_gain_steps[] = { 343 0, 9, 13, 40, 38, 13, 31, 22, 26, 31, 26, 14, 19, 5, 35, 13 344}; 345 346static const int r820t_mixer_gain_steps[] = { 347 0, 5, 10, 10, 19, 9, 10, 25, 17, 10, 8, 16, 13, 6, 3, -8 348}; 349 350/* 351 * I2C read/write code and shadow registers logic 352 */ 353static void shadow_store(struct r820t_priv *priv, u8 reg, const u8 *val, 354 int len) 355{ 356 int r = reg - REG_SHADOW_START; 357 358 if (r < 0) { 359 len += r; 360 r = 0; 361 } 362 if (len <= 0) 363 return; 364 if (len > NUM_REGS) 365 len = NUM_REGS; 366 367 tuner_dbg("%s: prev reg=%02x len=%d: %*ph\n", 368 __func__, r + REG_SHADOW_START, len, len, val); 369 370 memcpy(&priv->regs[r], val, len); 371} 372 373static int r820t_write(struct r820t_priv *priv, u8 reg, const u8 *val, 374 int len) 375{ 376 int rc, size, pos = 0; 377 378 /* Store the shadow registers */ 379 shadow_store(priv, reg, val, len); 380 381 do { 382 if (len > priv->cfg->max_i2c_msg_len - 1) 383 size = priv->cfg->max_i2c_msg_len - 1; 384 else 385 size = len; 386 387 /* Fill I2C buffer */ 388 priv->buf[0] = reg; 389 memcpy(&priv->buf[1], &val[pos], size); 390 391 rc = tuner_i2c_xfer_send(&priv->i2c_props, priv->buf, size + 1); 392 if (rc != size + 1) { 393 tuner_info("%s: i2c wr failed=%d reg=%02x len=%d: %*ph\n", 394 __func__, rc, reg, size, size, &priv->buf[1]); 395 if (rc < 0) 396 return rc; 397 return -EREMOTEIO; 398 } 399 tuner_dbg("%s: i2c wr reg=%02x len=%d: %*ph\n", 400 __func__, reg, size, size, &priv->buf[1]); 401 402 reg += size; 403 len -= size; 404 pos += size; 405 } while (len > 0); 406 407 return 0; 408} 409 410static int r820t_write_reg(struct r820t_priv *priv, u8 reg, u8 val) 411{ 412 return r820t_write(priv, reg, &val, 1); 413} 414 415static int r820t_read_cache_reg(struct r820t_priv *priv, int reg) 416{ 417 reg -= REG_SHADOW_START; 418 419 if (reg >= 0 && reg < NUM_REGS) 420 return priv->regs[reg]; 421 else 422 return -EINVAL; 423} 424 425static int r820t_write_reg_mask(struct r820t_priv *priv, u8 reg, u8 val, 426 u8 bit_mask) 427{ 428 int rc = r820t_read_cache_reg(priv, reg); 429 430 if (rc < 0) 431 return rc; 432 433 val = (rc & ~bit_mask) | (val & bit_mask); 434 435 return r820t_write(priv, reg, &val, 1); 436} 437 438static int r820t_read(struct r820t_priv *priv, u8 reg, u8 *val, int len) 439{ 440 int rc, i; 441 u8 *p = &priv->buf[1]; 442 443 priv->buf[0] = reg; 444 445 rc = tuner_i2c_xfer_send_recv(&priv->i2c_props, priv->buf, 1, p, len); 446 if (rc != len) { 447 tuner_info("%s: i2c rd failed=%d reg=%02x len=%d: %*ph\n", 448 __func__, rc, reg, len, len, p); 449 if (rc < 0) 450 return rc; 451 return -EREMOTEIO; 452 } 453 454 /* Copy data to the output buffer */ 455 for (i = 0; i < len; i++) 456 val[i] = bitrev8(p[i]); 457 458 tuner_dbg("%s: i2c rd reg=%02x len=%d: %*ph\n", 459 __func__, reg, len, len, val); 460 461 return 0; 462} 463 464/* 465 * r820t tuning logic 466 */ 467 468static int r820t_set_mux(struct r820t_priv *priv, u32 freq) 469{ 470 const struct r820t_freq_range *range; 471 int i, rc; 472 u8 val, reg08, reg09; 473 474 /* Get the proper frequency range */ 475 freq = freq / 1000000; 476 for (i = 0; i < ARRAY_SIZE(freq_ranges) - 1; i++) { 477 if (freq < freq_ranges[i + 1].freq) 478 break; 479 } 480 range = &freq_ranges[i]; 481 482 tuner_dbg("set r820t range#%d for frequency %d MHz\n", i, freq); 483 484 /* Open Drain */ 485 rc = r820t_write_reg_mask(priv, 0x17, range->open_d, 0x08); 486 if (rc < 0) 487 return rc; 488 489 /* RF_MUX,Polymux */ 490 rc = r820t_write_reg_mask(priv, 0x1a, range->rf_mux_ploy, 0xc3); 491 if (rc < 0) 492 return rc; 493 494 /* TF BAND */ 495 rc = r820t_write_reg(priv, 0x1b, range->tf_c); 496 if (rc < 0) 497 return rc; 498 499 /* XTAL CAP & Drive */ 500 switch (priv->xtal_cap_sel) { 501 case XTAL_LOW_CAP_30P: 502 case XTAL_LOW_CAP_20P: 503 val = range->xtal_cap20p | 0x08; 504 break; 505 case XTAL_LOW_CAP_10P: 506 val = range->xtal_cap10p | 0x08; 507 break; 508 case XTAL_HIGH_CAP_0P: 509 val = range->xtal_cap0p | 0x00; 510 break; 511 default: 512 case XTAL_LOW_CAP_0P: 513 val = range->xtal_cap0p | 0x08; 514 break; 515 } 516 rc = r820t_write_reg_mask(priv, 0x10, val, 0x0b); 517 if (rc < 0) 518 return rc; 519 520 if (priv->imr_done) { 521 reg08 = priv->imr_data[range->imr_mem].gain_x; 522 reg09 = priv->imr_data[range->imr_mem].phase_y; 523 } else { 524 reg08 = 0; 525 reg09 = 0; 526 } 527 rc = r820t_write_reg_mask(priv, 0x08, reg08, 0x3f); 528 if (rc < 0) 529 return rc; 530 531 rc = r820t_write_reg_mask(priv, 0x09, reg09, 0x3f); 532 533 return rc; 534} 535 536static int r820t_set_pll(struct r820t_priv *priv, enum v4l2_tuner_type type, 537 u32 freq) 538{ 539 u64 tmp64, vco_freq; 540 int rc, i; 541 unsigned sleep_time = 10000; 542 u32 vco_fra; /* VCO contribution by SDM (kHz) */ 543 u32 vco_min = 1770000; 544 u32 vco_max = vco_min * 2; 545 u32 pll_ref; 546 u16 n_sdm = 2; 547 u16 sdm = 0; 548 u8 mix_div = 2; 549 u8 div_buf = 0; 550 u8 div_num = 0; 551 u8 refdiv2 = 0; 552 u8 ni, si, nint, vco_fine_tune, val; 553 u8 data[5]; 554 555 /* Frequency in kHz */ 556 freq = freq / 1000; 557 pll_ref = priv->cfg->xtal / 1000; 558 559 if ((priv->cfg->rafael_chip == CHIP_R620D) || 560 (priv->cfg->rafael_chip == CHIP_R828D) || 561 (priv->cfg->rafael_chip == CHIP_R828)) { 562 /* ref set refdiv2, reffreq = Xtal/2 on ATV application */ 563 if (type != V4L2_TUNER_DIGITAL_TV) { 564 pll_ref /= 2; 565 refdiv2 = 0x10; 566 sleep_time = 20000; 567 } 568 } else { 569 if (priv->cfg->xtal > 24000000) { 570 pll_ref /= 2; 571 refdiv2 = 0x10; 572 } 573 } 574 575 tuner_dbg("set r820t pll for frequency %d kHz = %d%s\n", 576 freq, pll_ref, refdiv2 ? " / 2" : ""); 577 578 rc = r820t_write_reg_mask(priv, 0x10, refdiv2, 0x10); 579 if (rc < 0) 580 return rc; 581 582 /* set pll autotune = 128kHz */ 583 rc = r820t_write_reg_mask(priv, 0x1a, 0x00, 0x0c); 584 if (rc < 0) 585 return rc; 586 587 /* set VCO current = 100 */ 588 rc = r820t_write_reg_mask(priv, 0x12, 0x80, 0xe0); 589 if (rc < 0) 590 return rc; 591 592 /* Calculate divider */ 593 while (mix_div <= 64) { 594 if (((freq * mix_div) >= vco_min) && 595 ((freq * mix_div) < vco_max)) { 596 div_buf = mix_div; 597 while (div_buf > 2) { 598 div_buf = div_buf >> 1; 599 div_num++; 600 } 601 break; 602 } 603 mix_div = mix_div << 1; 604 } 605 606 rc = r820t_read(priv, 0x00, data, sizeof(data)); 607 if (rc < 0) 608 return rc; 609 610 vco_fine_tune = (data[4] & 0x30) >> 4; 611 612 if (vco_fine_tune > VCO_POWER_REF) 613 div_num = div_num - 1; 614 else if (vco_fine_tune < VCO_POWER_REF) 615 div_num = div_num + 1; 616 617 rc = r820t_write_reg_mask(priv, 0x10, div_num << 5, 0xe0); 618 if (rc < 0) 619 return rc; 620 621 vco_freq = (u64)(freq * (u64)mix_div); 622 623 tmp64 = vco_freq; 624 do_div(tmp64, 2 * pll_ref); 625 nint = (u8)tmp64; 626 627 tmp64 = vco_freq - ((u64)2) * pll_ref * nint; 628 do_div(tmp64, 1000); 629 vco_fra = (u16)(tmp64); 630 631 /* boundary spur prevention */ 632 if (vco_fra < pll_ref / 64) { 633 vco_fra = 0; 634 } else if (vco_fra > pll_ref * 127 / 64) { 635 vco_fra = 0; 636 nint++; 637 } else if ((vco_fra > pll_ref * 127 / 128) && (vco_fra < pll_ref)) { 638 vco_fra = pll_ref * 127 / 128; 639 } else if ((vco_fra > pll_ref) && (vco_fra < pll_ref * 129 / 128)) { 640 vco_fra = pll_ref * 129 / 128; 641 } 642 643 if (nint > 63) { 644 tuner_info("No valid PLL values for %u kHz!\n", freq); 645 return -EINVAL; 646 } 647 648 ni = (nint - 13) / 4; 649 si = nint - 4 * ni - 13; 650 651 rc = r820t_write_reg(priv, 0x14, ni + (si << 6)); 652 if (rc < 0) 653 return rc; 654 655 /* pw_sdm */ 656 if (!vco_fra) 657 val = 0x08; 658 else 659 val = 0x00; 660 661 rc = r820t_write_reg_mask(priv, 0x12, val, 0x08); 662 if (rc < 0) 663 return rc; 664 665 /* sdm calculator */ 666 while (vco_fra > 1) { 667 if (vco_fra > (2 * pll_ref / n_sdm)) { 668 sdm = sdm + 32768 / (n_sdm / 2); 669 vco_fra = vco_fra - 2 * pll_ref / n_sdm; 670 if (n_sdm >= 0x8000) 671 break; 672 } 673 n_sdm = n_sdm << 1; 674 } 675 676 rc = r820t_write_reg_mask(priv, 0x16, sdm >> 8, 0x08); 677 if (rc < 0) 678 return rc; 679 rc = r820t_write_reg_mask(priv, 0x15, sdm & 0xff, 0x08); 680 if (rc < 0) 681 return rc; 682 683 for (i = 0; i < 2; i++) { 684 usleep_range(sleep_time, sleep_time + 1000); 685 686 /* Check if PLL has locked */ 687 rc = r820t_read(priv, 0x00, data, 3); 688 if (rc < 0) 689 return rc; 690 if (data[2] & 0x40) 691 break; 692 693 if (!i) { 694 /* Didn't lock. Increase VCO current */ 695 rc = r820t_write_reg_mask(priv, 0x12, 0x60, 0xe0); 696 if (rc < 0) 697 return rc; 698 } 699 } 700 701 if (!(data[2] & 0x40)) { 702 priv->has_lock = false; 703 return 0; 704 } 705 706 priv->has_lock = true; 707 tuner_dbg("tuner has lock at frequency %d kHz\n", freq); 708 709 /* set pll autotune = 8kHz */ 710 rc = r820t_write_reg_mask(priv, 0x1a, 0x08, 0x08); 711 712 return rc; 713} 714 715static int r820t_sysfreq_sel(struct r820t_priv *priv, u32 freq, 716 enum v4l2_tuner_type type, 717 v4l2_std_id std, 718 u32 delsys) 719{ 720 int rc; 721 u8 mixer_top, lna_top, cp_cur, div_buf_cur, lna_vth_l, mixer_vth_l; 722 u8 air_cable1_in, cable2_in, pre_dect, lna_discharge, filter_cur; 723 724 tuner_dbg("adjusting tuner parameters for the standard\n"); 725 726 switch (delsys) { 727 case SYS_DVBT: 728 if ((freq == 506000000) || (freq == 666000000) || 729 (freq == 818000000)) { 730 mixer_top = 0x14; /* mixer top:14 , top-1, low-discharge */ 731 lna_top = 0xe5; /* detect bw 3, lna top:4, predet top:2 */ 732 cp_cur = 0x28; /* 101, 0.2 */ 733 div_buf_cur = 0x20; /* 10, 200u */ 734 } else { 735 mixer_top = 0x24; /* mixer top:13 , top-1, low-discharge */ 736 lna_top = 0xe5; /* detect bw 3, lna top:4, predet top:2 */ 737 cp_cur = 0x38; /* 111, auto */ 738 div_buf_cur = 0x30; /* 11, 150u */ 739 } 740 lna_vth_l = 0x53; /* lna vth 0.84 , vtl 0.64 */ 741 mixer_vth_l = 0x75; /* mixer vth 1.04, vtl 0.84 */ 742 air_cable1_in = 0x00; 743 cable2_in = 0x00; 744 pre_dect = 0x40; 745 lna_discharge = 14; 746 filter_cur = 0x40; /* 10, low */ 747 break; 748 case SYS_DVBT2: 749 mixer_top = 0x24; /* mixer top:13 , top-1, low-discharge */ 750 lna_top = 0xe5; /* detect bw 3, lna top:4, predet top:2 */ 751 lna_vth_l = 0x53; /* lna vth 0.84 , vtl 0.64 */ 752 mixer_vth_l = 0x75; /* mixer vth 1.04, vtl 0.84 */ 753 air_cable1_in = 0x00; 754 cable2_in = 0x00; 755 pre_dect = 0x40; 756 lna_discharge = 14; 757 cp_cur = 0x38; /* 111, auto */ 758 div_buf_cur = 0x30; /* 11, 150u */ 759 filter_cur = 0x40; /* 10, low */ 760 break; 761 case SYS_ISDBT: 762 mixer_top = 0x24; /* mixer top:13 , top-1, low-discharge */ 763 lna_top = 0xe5; /* detect bw 3, lna top:4, predet top:2 */ 764 lna_vth_l = 0x75; /* lna vth 1.04 , vtl 0.84 */ 765 mixer_vth_l = 0x75; /* mixer vth 1.04, vtl 0.84 */ 766 air_cable1_in = 0x00; 767 cable2_in = 0x00; 768 pre_dect = 0x40; 769 lna_discharge = 14; 770 cp_cur = 0x38; /* 111, auto */ 771 div_buf_cur = 0x30; /* 11, 150u */ 772 filter_cur = 0x40; /* 10, low */ 773 break; 774 default: /* DVB-T 8M */ 775 mixer_top = 0x24; /* mixer top:13 , top-1, low-discharge */ 776 lna_top = 0xe5; /* detect bw 3, lna top:4, predet top:2 */ 777 lna_vth_l = 0x53; /* lna vth 0.84 , vtl 0.64 */ 778 mixer_vth_l = 0x75; /* mixer vth 1.04, vtl 0.84 */ 779 air_cable1_in = 0x00; 780 cable2_in = 0x00; 781 pre_dect = 0x40; 782 lna_discharge = 14; 783 cp_cur = 0x38; /* 111, auto */ 784 div_buf_cur = 0x30; /* 11, 150u */ 785 filter_cur = 0x40; /* 10, low */ 786 break; 787 } 788 789 if (priv->cfg->use_diplexer && 790 ((priv->cfg->rafael_chip == CHIP_R820T) || 791 (priv->cfg->rafael_chip == CHIP_R828S) || 792 (priv->cfg->rafael_chip == CHIP_R820C))) { 793 if (freq > DIP_FREQ) 794 air_cable1_in = 0x00; 795 else 796 air_cable1_in = 0x60; 797 cable2_in = 0x00; 798 } 799 800 rc = r820t_write_reg_mask(priv, 0x1d, lna_top, 0xc7); 801 if (rc < 0) 802 return rc; 803 rc = r820t_write_reg_mask(priv, 0x1c, mixer_top, 0xf8); 804 if (rc < 0) 805 return rc; 806 rc = r820t_write_reg(priv, 0x0d, lna_vth_l); 807 if (rc < 0) 808 return rc; 809 rc = r820t_write_reg(priv, 0x0e, mixer_vth_l); 810 if (rc < 0) 811 return rc; 812 813 /* Air-IN only for Astrometa */ 814 rc = r820t_write_reg_mask(priv, 0x05, air_cable1_in, 0x60); 815 if (rc < 0) 816 return rc; 817 rc = r820t_write_reg_mask(priv, 0x06, cable2_in, 0x08); 818 if (rc < 0) 819 return rc; 820 821 rc = r820t_write_reg_mask(priv, 0x11, cp_cur, 0x38); 822 if (rc < 0) 823 return rc; 824 rc = r820t_write_reg_mask(priv, 0x17, div_buf_cur, 0x30); 825 if (rc < 0) 826 return rc; 827 rc = r820t_write_reg_mask(priv, 0x0a, filter_cur, 0x60); 828 if (rc < 0) 829 return rc; 830 /* 831 * Original driver initializes regs 0x05 and 0x06 with the 832 * same value again on this point. Probably, it is just an 833 * error there 834 */ 835 836 /* 837 * Set LNA 838 */ 839 840 tuner_dbg("adjusting LNA parameters\n"); 841 if (type != V4L2_TUNER_ANALOG_TV) { 842 /* LNA TOP: lowest */ 843 rc = r820t_write_reg_mask(priv, 0x1d, 0, 0x38); 844 if (rc < 0) 845 return rc; 846 847 /* 0: normal mode */ 848 rc = r820t_write_reg_mask(priv, 0x1c, 0, 0x04); 849 if (rc < 0) 850 return rc; 851 852 /* 0: PRE_DECT off */ 853 rc = r820t_write_reg_mask(priv, 0x06, 0, 0x40); 854 if (rc < 0) 855 return rc; 856 857 /* agc clk 250hz */ 858 rc = r820t_write_reg_mask(priv, 0x1a, 0x30, 0x30); 859 if (rc < 0) 860 return rc; 861 862 msleep(250); 863 864 /* write LNA TOP = 3 */ 865 rc = r820t_write_reg_mask(priv, 0x1d, 0x18, 0x38); 866 if (rc < 0) 867 return rc; 868 869 /* 870 * write discharge mode 871 * FIXME: IMHO, the mask here is wrong, but it matches 872 * what's there at the original driver 873 */ 874 rc = r820t_write_reg_mask(priv, 0x1c, mixer_top, 0x04); 875 if (rc < 0) 876 return rc; 877 878 /* LNA discharge current */ 879 rc = r820t_write_reg_mask(priv, 0x1e, lna_discharge, 0x1f); 880 if (rc < 0) 881 return rc; 882 883 /* agc clk 60hz */ 884 rc = r820t_write_reg_mask(priv, 0x1a, 0x20, 0x30); 885 if (rc < 0) 886 return rc; 887 } else { 888 /* PRE_DECT off */ 889 rc = r820t_write_reg_mask(priv, 0x06, 0, 0x40); 890 if (rc < 0) 891 return rc; 892 893 /* write LNA TOP */ 894 rc = r820t_write_reg_mask(priv, 0x1d, lna_top, 0x38); 895 if (rc < 0) 896 return rc; 897 898 /* 899 * write discharge mode 900 * FIXME: IMHO, the mask here is wrong, but it matches 901 * what's there at the original driver 902 */ 903 rc = r820t_write_reg_mask(priv, 0x1c, mixer_top, 0x04); 904 if (rc < 0) 905 return rc; 906 907 /* LNA discharge current */ 908 rc = r820t_write_reg_mask(priv, 0x1e, lna_discharge, 0x1f); 909 if (rc < 0) 910 return rc; 911 912 /* agc clk 1Khz, external det1 cap 1u */ 913 rc = r820t_write_reg_mask(priv, 0x1a, 0x00, 0x30); 914 if (rc < 0) 915 return rc; 916 917 rc = r820t_write_reg_mask(priv, 0x10, 0x00, 0x04); 918 if (rc < 0) 919 return rc; 920 } 921 return 0; 922} 923 924static int r820t_set_tv_standard(struct r820t_priv *priv, 925 unsigned bw, 926 enum v4l2_tuner_type type, 927 v4l2_std_id std, u32 delsys) 928 929{ 930 int rc, i; 931 u32 if_khz, filt_cal_lo; 932 u8 data[5], val; 933 u8 filt_gain, img_r, filt_q, hp_cor, ext_enable, loop_through; 934 u8 lt_att, flt_ext_widest, polyfil_cur; 935 bool need_calibration; 936 937 tuner_dbg("selecting the delivery system\n"); 938 939 if (delsys == SYS_ISDBT) { 940 if_khz = 4063; 941 filt_cal_lo = 59000; 942 filt_gain = 0x10; /* +3db, 6mhz on */ 943 img_r = 0x00; /* image negative */ 944 filt_q = 0x10; /* r10[4]:low q(1'b1) */ 945 hp_cor = 0x6a; /* 1.7m disable, +2cap, 1.25mhz */ 946 ext_enable = 0x40; /* r30[6], ext enable; r30[5]:0 ext at lna max */ 947 loop_through = 0x00; /* r5[7], lt on */ 948 lt_att = 0x00; /* r31[7], lt att enable */ 949 flt_ext_widest = 0x00; /* r15[7]: flt_ext_wide off */ 950 polyfil_cur = 0x60; /* r25[6:5]:min */ 951 } else { 952 if (bw <= 6) { 953 if_khz = 3570; 954 filt_cal_lo = 56000; /* 52000->56000 */ 955 filt_gain = 0x10; /* +3db, 6mhz on */ 956 img_r = 0x00; /* image negative */ 957 filt_q = 0x10; /* r10[4]:low q(1'b1) */ 958 hp_cor = 0x6b; /* 1.7m disable, +2cap, 1.0mhz */ 959 ext_enable = 0x60; /* r30[6]=1 ext enable; r30[5]:1 ext at lna max-1 */ 960 loop_through = 0x00; /* r5[7], lt on */ 961 lt_att = 0x00; /* r31[7], lt att enable */ 962 flt_ext_widest = 0x00; /* r15[7]: flt_ext_wide off */ 963 polyfil_cur = 0x60; /* r25[6:5]:min */ 964 } else if (bw == 7) { 965#if 0 966 /* 967 * There are two 7 MHz tables defined on the original 968 * driver, but just the second one seems to be visible 969 * by rtl2832. Keep this one here commented, as it 970 * might be needed in the future 971 */ 972 973 if_khz = 4070; 974 filt_cal_lo = 60000; 975 filt_gain = 0x10; /* +3db, 6mhz on */ 976 img_r = 0x00; /* image negative */ 977 filt_q = 0x10; /* r10[4]:low q(1'b1) */ 978 hp_cor = 0x2b; /* 1.7m disable, +1cap, 1.0mhz */ 979 ext_enable = 0x60; /* r30[6]=1 ext enable; r30[5]:1 ext at lna max-1 */ 980 loop_through = 0x00; /* r5[7], lt on */ 981 lt_att = 0x00; /* r31[7], lt att enable */ 982 flt_ext_widest = 0x00; /* r15[7]: flt_ext_wide off */ 983 polyfil_cur = 0x60; /* r25[6:5]:min */ 984#endif 985 /* 7 MHz, second table */ 986 if_khz = 4570; 987 filt_cal_lo = 63000; 988 filt_gain = 0x10; /* +3db, 6mhz on */ 989 img_r = 0x00; /* image negative */ 990 filt_q = 0x10; /* r10[4]:low q(1'b1) */ 991 hp_cor = 0x2a; /* 1.7m disable, +1cap, 1.25mhz */ 992 ext_enable = 0x60; /* r30[6]=1 ext enable; r30[5]:1 ext at lna max-1 */ 993 loop_through = 0x00; /* r5[7], lt on */ 994 lt_att = 0x00; /* r31[7], lt att enable */ 995 flt_ext_widest = 0x00; /* r15[7]: flt_ext_wide off */ 996 polyfil_cur = 0x60; /* r25[6:5]:min */ 997 } else { 998 if_khz = 4570; 999 filt_cal_lo = 68500; 1000 filt_gain = 0x10; /* +3db, 6mhz on */ 1001 img_r = 0x00; /* image negative */ 1002 filt_q = 0x10; /* r10[4]:low q(1'b1) */ 1003 hp_cor = 0x0b; /* 1.7m disable, +0cap, 1.0mhz */ 1004 ext_enable = 0x60; /* r30[6]=1 ext enable; r30[5]:1 ext at lna max-1 */ 1005 loop_through = 0x00; /* r5[7], lt on */ 1006 lt_att = 0x00; /* r31[7], lt att enable */ 1007 flt_ext_widest = 0x00; /* r15[7]: flt_ext_wide off */ 1008 polyfil_cur = 0x60; /* r25[6:5]:min */ 1009 } 1010 } 1011 1012 /* Initialize the shadow registers */ 1013 memcpy(priv->regs, r820t_init_array, sizeof(r820t_init_array)); 1014 1015 /* Init Flag & Xtal_check Result */ 1016 if (priv->imr_done) 1017 val = 1 | priv->xtal_cap_sel << 1; 1018 else 1019 val = 0; 1020 rc = r820t_write_reg_mask(priv, 0x0c, val, 0x0f); 1021 if (rc < 0) 1022 return rc; 1023 1024 /* version */ 1025 rc = r820t_write_reg_mask(priv, 0x13, VER_NUM, 0x3f); 1026 if (rc < 0) 1027 return rc; 1028 1029 /* for LT Gain test */ 1030 if (type != V4L2_TUNER_ANALOG_TV) { 1031 rc = r820t_write_reg_mask(priv, 0x1d, 0x00, 0x38); 1032 if (rc < 0) 1033 return rc; 1034 usleep_range(1000, 2000); 1035 } 1036 priv->int_freq = if_khz * 1000; 1037 1038 /* Check if standard changed. If so, filter calibration is needed */ 1039 if (type != priv->type) 1040 need_calibration = true; 1041 else if ((type == V4L2_TUNER_ANALOG_TV) && (std != priv->std)) 1042 need_calibration = true; 1043 else if ((type == V4L2_TUNER_DIGITAL_TV) && 1044 ((delsys != priv->delsys) || bw != priv->bw)) 1045 need_calibration = true; 1046 else 1047 need_calibration = false; 1048 1049 if (need_calibration) { 1050 tuner_dbg("calibrating the tuner\n"); 1051 for (i = 0; i < 2; i++) { 1052 /* Set filt_cap */ 1053 rc = r820t_write_reg_mask(priv, 0x0b, hp_cor, 0x60); 1054 if (rc < 0) 1055 return rc; 1056 1057 /* set cali clk =on */ 1058 rc = r820t_write_reg_mask(priv, 0x0f, 0x04, 0x04); 1059 if (rc < 0) 1060 return rc; 1061 1062 /* X'tal cap 0pF for PLL */ 1063 rc = r820t_write_reg_mask(priv, 0x10, 0x00, 0x03); 1064 if (rc < 0) 1065 return rc; 1066 1067 rc = r820t_set_pll(priv, type, filt_cal_lo); 1068 if (rc < 0 || !priv->has_lock) 1069 return rc; 1070 1071 /* Start Trigger */ 1072 rc = r820t_write_reg_mask(priv, 0x0b, 0x10, 0x10); 1073 if (rc < 0) 1074 return rc; 1075 1076 usleep_range(1000, 2000); 1077 1078 /* Stop Trigger */ 1079 rc = r820t_write_reg_mask(priv, 0x0b, 0x00, 0x10); 1080 if (rc < 0) 1081 return rc; 1082 1083 /* set cali clk =off */ 1084 rc = r820t_write_reg_mask(priv, 0x0f, 0x00, 0x04); 1085 if (rc < 0) 1086 return rc; 1087 1088 /* Check if calibration worked */ 1089 rc = r820t_read(priv, 0x00, data, sizeof(data)); 1090 if (rc < 0) 1091 return rc; 1092 1093 priv->fil_cal_code = data[4] & 0x0f; 1094 if (priv->fil_cal_code && priv->fil_cal_code != 0x0f) 1095 break; 1096 } 1097 /* narrowest */ 1098 if (priv->fil_cal_code == 0x0f) 1099 priv->fil_cal_code = 0; 1100 } 1101 1102 rc = r820t_write_reg_mask(priv, 0x0a, 1103 filt_q | priv->fil_cal_code, 0x1f); 1104 if (rc < 0) 1105 return rc; 1106 1107 /* Set BW, Filter_gain, & HP corner */ 1108 rc = r820t_write_reg_mask(priv, 0x0b, hp_cor, 0x10); 1109 if (rc < 0) 1110 return rc; 1111 1112 1113 /* Set Img_R */ 1114 rc = r820t_write_reg_mask(priv, 0x07, img_r, 0x80); 1115 if (rc < 0) 1116 return rc; 1117 1118 /* Set filt_3dB, V6MHz */ 1119 rc = r820t_write_reg_mask(priv, 0x06, filt_gain, 0x30); 1120 if (rc < 0) 1121 return rc; 1122 1123 /* channel filter extension */ 1124 rc = r820t_write_reg_mask(priv, 0x1e, ext_enable, 0x60); 1125 if (rc < 0) 1126 return rc; 1127 1128 /* Loop through */ 1129 rc = r820t_write_reg_mask(priv, 0x05, loop_through, 0x80); 1130 if (rc < 0) 1131 return rc; 1132 1133 /* Loop through attenuation */ 1134 rc = r820t_write_reg_mask(priv, 0x1f, lt_att, 0x80); 1135 if (rc < 0) 1136 return rc; 1137 1138 /* filter extension widest */ 1139 rc = r820t_write_reg_mask(priv, 0x0f, flt_ext_widest, 0x80); 1140 if (rc < 0) 1141 return rc; 1142 1143 /* RF poly filter current */ 1144 rc = r820t_write_reg_mask(priv, 0x19, polyfil_cur, 0x60); 1145 if (rc < 0) 1146 return rc; 1147 1148 /* Store current standard. If it changes, re-calibrate the tuner */ 1149 priv->delsys = delsys; 1150 priv->type = type; 1151 priv->std = std; 1152 priv->bw = bw; 1153 1154 return 0; 1155} 1156 1157static int r820t_read_gain(struct r820t_priv *priv) 1158{ 1159 u8 data[4]; 1160 int rc; 1161 1162 rc = r820t_read(priv, 0x00, data, sizeof(data)); 1163 if (rc < 0) 1164 return rc; 1165 1166 return ((data[3] & 0x0f) << 1) + ((data[3] & 0xf0) >> 4); 1167} 1168 1169static int r820t_set_gain_mode(struct r820t_priv *priv, 1170 bool set_manual_gain, 1171 int gain) 1172{ 1173 int rc; 1174 1175 if (set_manual_gain) { 1176 int i, total_gain = 0; 1177 uint8_t mix_index = 0, lna_index = 0; 1178 u8 data[4]; 1179 1180 /* LNA auto off */ 1181 rc = r820t_write_reg_mask(priv, 0x05, 0x10, 0x10); 1182 if (rc < 0) 1183 return rc; 1184 1185 /* Mixer auto off */ 1186 rc = r820t_write_reg_mask(priv, 0x07, 0, 0x10); 1187 if (rc < 0) 1188 return rc; 1189 1190 rc = r820t_read(priv, 0x00, data, sizeof(data)); 1191 if (rc < 0) 1192 return rc; 1193 1194 /* set fixed VGA gain for now (16.3 dB) */ 1195 rc = r820t_write_reg_mask(priv, 0x0c, 0x08, 0x9f); 1196 if (rc < 0) 1197 return rc; 1198 1199 for (i = 0; i < 15; i++) { 1200 if (total_gain >= gain) 1201 break; 1202 1203 total_gain += r820t_lna_gain_steps[++lna_index]; 1204 1205 if (total_gain >= gain) 1206 break; 1207 1208 total_gain += r820t_mixer_gain_steps[++mix_index]; 1209 } 1210 1211 /* set LNA gain */ 1212 rc = r820t_write_reg_mask(priv, 0x05, lna_index, 0x0f); 1213 if (rc < 0) 1214 return rc; 1215 1216 /* set Mixer gain */ 1217 rc = r820t_write_reg_mask(priv, 0x07, mix_index, 0x0f); 1218 if (rc < 0) 1219 return rc; 1220 } else { 1221 /* LNA */ 1222 rc = r820t_write_reg_mask(priv, 0x05, 0, 0xef); 1223 if (rc < 0) 1224 return rc; 1225 1226 /* Mixer */ 1227 rc = r820t_write_reg_mask(priv, 0x07, 0x10, 0xef); 1228 if (rc < 0) 1229 return rc; 1230 1231 /* set fixed VGA gain for now (26.5 dB) */ 1232 rc = r820t_write_reg_mask(priv, 0x0c, 0x0b, 0x9f); 1233 if (rc < 0) 1234 return rc; 1235 } 1236 1237 return 0; 1238} 1239 1240 1241static int generic_set_freq(struct dvb_frontend *fe, 1242 u32 freq /* in HZ */, 1243 unsigned bw, 1244 enum v4l2_tuner_type type, 1245 v4l2_std_id std, u32 delsys) 1246{ 1247 struct r820t_priv *priv = fe->tuner_priv; 1248 int rc = -EINVAL; 1249 u32 lo_freq; 1250 1251 tuner_dbg("should set frequency to %d kHz, bw %d MHz\n", 1252 freq / 1000, bw); 1253 1254 rc = r820t_set_tv_standard(priv, bw, type, std, delsys); 1255 if (rc < 0) 1256 goto err; 1257 1258 if ((type == V4L2_TUNER_ANALOG_TV) && (std == V4L2_STD_SECAM_LC)) 1259 lo_freq = freq - priv->int_freq; 1260 else 1261 lo_freq = freq + priv->int_freq; 1262 1263 rc = r820t_set_mux(priv, lo_freq); 1264 if (rc < 0) 1265 goto err; 1266 1267 rc = r820t_set_gain_mode(priv, true, 0); 1268 if (rc < 0) 1269 goto err; 1270 1271 rc = r820t_set_pll(priv, type, lo_freq); 1272 if (rc < 0 || !priv->has_lock) 1273 goto err; 1274 1275 rc = r820t_sysfreq_sel(priv, freq, type, std, delsys); 1276 if (rc < 0) 1277 goto err; 1278 1279 tuner_dbg("%s: PLL locked on frequency %d Hz, gain=%d\n", 1280 __func__, freq, r820t_read_gain(priv)); 1281 1282err: 1283 1284 if (rc < 0) 1285 tuner_dbg("%s: failed=%d\n", __func__, rc); 1286 return rc; 1287} 1288 1289/* 1290 * r820t standby logic 1291 */ 1292 1293static int r820t_standby(struct r820t_priv *priv) 1294{ 1295 int rc; 1296 1297 rc = r820t_write_reg(priv, 0x06, 0xb1); 1298 if (rc < 0) 1299 return rc; 1300 rc = r820t_write_reg(priv, 0x05, 0x03); 1301 if (rc < 0) 1302 return rc; 1303 rc = r820t_write_reg(priv, 0x07, 0x3a); 1304 if (rc < 0) 1305 return rc; 1306 rc = r820t_write_reg(priv, 0x08, 0x40); 1307 if (rc < 0) 1308 return rc; 1309 rc = r820t_write_reg(priv, 0x09, 0xc0); 1310 if (rc < 0) 1311 return rc; 1312 rc = r820t_write_reg(priv, 0x0a, 0x36); 1313 if (rc < 0) 1314 return rc; 1315 rc = r820t_write_reg(priv, 0x0c, 0x35); 1316 if (rc < 0) 1317 return rc; 1318 rc = r820t_write_reg(priv, 0x0f, 0x68); 1319 if (rc < 0) 1320 return rc; 1321 rc = r820t_write_reg(priv, 0x11, 0x03); 1322 if (rc < 0) 1323 return rc; 1324 rc = r820t_write_reg(priv, 0x17, 0xf4); 1325 if (rc < 0) 1326 return rc; 1327 rc = r820t_write_reg(priv, 0x19, 0x0c); 1328 1329 /* Force initial calibration */ 1330 priv->type = -1; 1331 1332 return rc; 1333} 1334 1335/* 1336 * r820t device init logic 1337 */ 1338 1339static int r820t_xtal_check(struct r820t_priv *priv) 1340{ 1341 int rc, i; 1342 u8 data[3], val; 1343 1344 /* Initialize the shadow registers */ 1345 memcpy(priv->regs, r820t_init_array, sizeof(r820t_init_array)); 1346 1347 /* cap 30pF & Drive Low */ 1348 rc = r820t_write_reg_mask(priv, 0x10, 0x0b, 0x0b); 1349 if (rc < 0) 1350 return rc; 1351 1352 /* set pll autotune = 128kHz */ 1353 rc = r820t_write_reg_mask(priv, 0x1a, 0x00, 0x0c); 1354 if (rc < 0) 1355 return rc; 1356 1357 /* set manual initial reg = 111111; */ 1358 rc = r820t_write_reg_mask(priv, 0x13, 0x7f, 0x7f); 1359 if (rc < 0) 1360 return rc; 1361 1362 /* set auto */ 1363 rc = r820t_write_reg_mask(priv, 0x13, 0x00, 0x40); 1364 if (rc < 0) 1365 return rc; 1366 1367 /* Try several xtal capacitor alternatives */ 1368 for (i = 0; i < ARRAY_SIZE(r820t_xtal_capacitor); i++) { 1369 rc = r820t_write_reg_mask(priv, 0x10, 1370 r820t_xtal_capacitor[i][0], 0x1b); 1371 if (rc < 0) 1372 return rc; 1373 1374 usleep_range(5000, 6000); 1375 1376 rc = r820t_read(priv, 0x00, data, sizeof(data)); 1377 if (rc < 0) 1378 return rc; 1379 if ((!data[2]) & 0x40) 1380 continue; 1381 1382 val = data[2] & 0x3f; 1383 1384 if (priv->cfg->xtal == 16000000 && (val > 29 || val < 23)) 1385 break; 1386 1387 if (val != 0x3f) 1388 break; 1389 } 1390 1391 if (i == ARRAY_SIZE(r820t_xtal_capacitor)) 1392 return -EINVAL; 1393 1394 return r820t_xtal_capacitor[i][1]; 1395} 1396 1397static int r820t_imr_prepare(struct r820t_priv *priv) 1398{ 1399 int rc; 1400 1401 /* Initialize the shadow registers */ 1402 memcpy(priv->regs, r820t_init_array, sizeof(r820t_init_array)); 1403 1404 /* lna off (air-in off) */ 1405 rc = r820t_write_reg_mask(priv, 0x05, 0x20, 0x20); 1406 if (rc < 0) 1407 return rc; 1408 1409 /* mixer gain mode = manual */ 1410 rc = r820t_write_reg_mask(priv, 0x07, 0, 0x10); 1411 if (rc < 0) 1412 return rc; 1413 1414 /* filter corner = lowest */ 1415 rc = r820t_write_reg_mask(priv, 0x0a, 0x0f, 0x0f); 1416 if (rc < 0) 1417 return rc; 1418 1419 /* filter bw=+2cap, hp=5M */ 1420 rc = r820t_write_reg_mask(priv, 0x0b, 0x60, 0x6f); 1421 if (rc < 0) 1422 return rc; 1423 1424 /* adc=on, vga code mode, gain = 26.5dB */ 1425 rc = r820t_write_reg_mask(priv, 0x0c, 0x0b, 0x9f); 1426 if (rc < 0) 1427 return rc; 1428 1429 /* ring clk = on */ 1430 rc = r820t_write_reg_mask(priv, 0x0f, 0, 0x08); 1431 if (rc < 0) 1432 return rc; 1433 1434 /* ring power = on */ 1435 rc = r820t_write_reg_mask(priv, 0x18, 0x10, 0x10); 1436 if (rc < 0) 1437 return rc; 1438 1439 /* from ring = ring pll in */ 1440 rc = r820t_write_reg_mask(priv, 0x1c, 0x02, 0x02); 1441 if (rc < 0) 1442 return rc; 1443 1444 /* sw_pdect = det3 */ 1445 rc = r820t_write_reg_mask(priv, 0x1e, 0x80, 0x80); 1446 if (rc < 0) 1447 return rc; 1448 1449 /* Set filt_3dB */ 1450 rc = r820t_write_reg_mask(priv, 0x06, 0x20, 0x20); 1451 1452 return rc; 1453} 1454 1455static int r820t_multi_read(struct r820t_priv *priv) 1456{ 1457 int rc, i; 1458 u8 data[2], min = 0, max = 255, sum = 0; 1459 1460 usleep_range(5000, 6000); 1461 1462 for (i = 0; i < 6; i++) { 1463 rc = r820t_read(priv, 0x00, data, sizeof(data)); 1464 if (rc < 0) 1465 return rc; 1466 1467 sum += data[1]; 1468 1469 if (data[1] < min) 1470 min = data[1]; 1471 1472 if (data[1] > max) 1473 max = data[1]; 1474 } 1475 rc = sum - max - min; 1476 1477 return rc; 1478} 1479 1480static int r820t_imr_cross(struct r820t_priv *priv, 1481 struct r820t_sect_type iq_point[3], 1482 u8 *x_direct) 1483{ 1484 struct r820t_sect_type cross[5]; /* (0,0)(0,Q-1)(0,I-1)(Q-1,0)(I-1,0) */ 1485 struct r820t_sect_type tmp; 1486 int i, rc; 1487 u8 reg08, reg09; 1488 1489 reg08 = r820t_read_cache_reg(priv, 8) & 0xc0; 1490 reg09 = r820t_read_cache_reg(priv, 9) & 0xc0; 1491 1492 tmp.gain_x = 0; 1493 tmp.phase_y = 0; 1494 tmp.value = 255; 1495 1496 for (i = 0; i < 5; i++) { 1497 switch (i) { 1498 case 0: 1499 cross[i].gain_x = reg08; 1500 cross[i].phase_y = reg09; 1501 break; 1502 case 1: 1503 cross[i].gain_x = reg08; /* 0 */ 1504 cross[i].phase_y = reg09 + 1; /* Q-1 */ 1505 break; 1506 case 2: 1507 cross[i].gain_x = reg08; /* 0 */ 1508 cross[i].phase_y = (reg09 | 0x20) + 1; /* I-1 */ 1509 break; 1510 case 3: 1511 cross[i].gain_x = reg08 + 1; /* Q-1 */ 1512 cross[i].phase_y = reg09; 1513 break; 1514 default: 1515 cross[i].gain_x = (reg08 | 0x20) + 1; /* I-1 */ 1516 cross[i].phase_y = reg09; 1517 } 1518 1519 rc = r820t_write_reg(priv, 0x08, cross[i].gain_x); 1520 if (rc < 0) 1521 return rc; 1522 1523 rc = r820t_write_reg(priv, 0x09, cross[i].phase_y); 1524 if (rc < 0) 1525 return rc; 1526 1527 rc = r820t_multi_read(priv); 1528 if (rc < 0) 1529 return rc; 1530 1531 cross[i].value = rc; 1532 1533 if (cross[i].value < tmp.value) 1534 memcpy(&tmp, &cross[i], sizeof(tmp)); 1535 } 1536 1537 if ((tmp.phase_y & 0x1f) == 1) { /* y-direction */ 1538 *x_direct = 0; 1539 1540 iq_point[0] = cross[0]; 1541 iq_point[1] = cross[1]; 1542 iq_point[2] = cross[2]; 1543 } else { /* (0,0) or x-direction */ 1544 *x_direct = 1; 1545 1546 iq_point[0] = cross[0]; 1547 iq_point[1] = cross[3]; 1548 iq_point[2] = cross[4]; 1549 } 1550 return 0; 1551} 1552 1553static void r820t_compre_cor(struct r820t_sect_type iq[3]) 1554{ 1555 int i; 1556 1557 for (i = 3; i > 0; i--) { 1558 if (iq[0].value > iq[i - 1].value) 1559 swap(iq[0], iq[i - 1]); 1560 } 1561} 1562 1563static int r820t_compre_step(struct r820t_priv *priv, 1564 struct r820t_sect_type iq[3], u8 reg) 1565{ 1566 int rc; 1567 struct r820t_sect_type tmp; 1568 1569 /* 1570 * Purpose: if (Gain<9 or Phase<9), Gain+1 or Phase+1 and compare 1571 * with min value: 1572 * new < min => update to min and continue 1573 * new > min => Exit 1574 */ 1575 1576 /* min value already saved in iq[0] */ 1577 tmp.phase_y = iq[0].phase_y; 1578 tmp.gain_x = iq[0].gain_x; 1579 1580 while (((tmp.gain_x & 0x1f) < IMR_TRIAL) && 1581 ((tmp.phase_y & 0x1f) < IMR_TRIAL)) { 1582 if (reg == 0x08) 1583 tmp.gain_x++; 1584 else 1585 tmp.phase_y++; 1586 1587 rc = r820t_write_reg(priv, 0x08, tmp.gain_x); 1588 if (rc < 0) 1589 return rc; 1590 1591 rc = r820t_write_reg(priv, 0x09, tmp.phase_y); 1592 if (rc < 0) 1593 return rc; 1594 1595 rc = r820t_multi_read(priv); 1596 if (rc < 0) 1597 return rc; 1598 tmp.value = rc; 1599 1600 if (tmp.value <= iq[0].value) { 1601 iq[0].gain_x = tmp.gain_x; 1602 iq[0].phase_y = tmp.phase_y; 1603 iq[0].value = tmp.value; 1604 } else { 1605 return 0; 1606 } 1607 1608 } 1609 1610 return 0; 1611} 1612 1613static int r820t_iq_tree(struct r820t_priv *priv, 1614 struct r820t_sect_type iq[3], 1615 u8 fix_val, u8 var_val, u8 fix_reg) 1616{ 1617 int rc, i; 1618 u8 tmp, var_reg; 1619 1620 /* 1621 * record IMC results by input gain/phase location then adjust 1622 * gain or phase positive 1 step and negtive 1 step, 1623 * both record results 1624 */ 1625 1626 if (fix_reg == 0x08) 1627 var_reg = 0x09; 1628 else 1629 var_reg = 0x08; 1630 1631 for (i = 0; i < 3; i++) { 1632 rc = r820t_write_reg(priv, fix_reg, fix_val); 1633 if (rc < 0) 1634 return rc; 1635 1636 rc = r820t_write_reg(priv, var_reg, var_val); 1637 if (rc < 0) 1638 return rc; 1639 1640 rc = r820t_multi_read(priv); 1641 if (rc < 0) 1642 return rc; 1643 iq[i].value = rc; 1644 1645 if (fix_reg == 0x08) { 1646 iq[i].gain_x = fix_val; 1647 iq[i].phase_y = var_val; 1648 } else { 1649 iq[i].phase_y = fix_val; 1650 iq[i].gain_x = var_val; 1651 } 1652 1653 if (i == 0) { /* try right-side point */ 1654 var_val++; 1655 } else if (i == 1) { /* try left-side point */ 1656 /* if absolute location is 1, change I/Q direction */ 1657 if ((var_val & 0x1f) < 0x02) { 1658 tmp = 2 - (var_val & 0x1f); 1659 1660 /* b[5]:I/Q selection. 0:Q-path, 1:I-path */ 1661 if (var_val & 0x20) { 1662 var_val &= 0xc0; 1663 var_val |= tmp; 1664 } else { 1665 var_val |= 0x20 | tmp; 1666 } 1667 } else { 1668 var_val -= 2; 1669 } 1670 } 1671 } 1672 1673 return 0; 1674} 1675 1676static int r820t_section(struct r820t_priv *priv, 1677 struct r820t_sect_type *iq_point) 1678{ 1679 int rc; 1680 struct r820t_sect_type compare_iq[3], compare_bet[3]; 1681 1682 /* Try X-1 column and save min result to compare_bet[0] */ 1683 if (!(iq_point->gain_x & 0x1f)) 1684 compare_iq[0].gain_x = ((iq_point->gain_x) & 0xdf) + 1; /* Q-path, Gain=1 */ 1685 else 1686 compare_iq[0].gain_x = iq_point->gain_x - 1; /* left point */ 1687 compare_iq[0].phase_y = iq_point->phase_y; 1688 1689 /* y-direction */ 1690 rc = r820t_iq_tree(priv, compare_iq, compare_iq[0].gain_x, 1691 compare_iq[0].phase_y, 0x08); 1692 if (rc < 0) 1693 return rc; 1694 1695 r820t_compre_cor(compare_iq); 1696 1697 compare_bet[0] = compare_iq[0]; 1698 1699 /* Try X column and save min result to compare_bet[1] */ 1700 compare_iq[0].gain_x = iq_point->gain_x; 1701 compare_iq[0].phase_y = iq_point->phase_y; 1702 1703 rc = r820t_iq_tree(priv, compare_iq, compare_iq[0].gain_x, 1704 compare_iq[0].phase_y, 0x08); 1705 if (rc < 0) 1706 return rc; 1707 1708 r820t_compre_cor(compare_iq); 1709 1710 compare_bet[1] = compare_iq[0]; 1711 1712 /* Try X+1 column and save min result to compare_bet[2] */ 1713 if ((iq_point->gain_x & 0x1f) == 0x00) 1714 compare_iq[0].gain_x = ((iq_point->gain_x) | 0x20) + 1; /* I-path, Gain=1 */ 1715 else 1716 compare_iq[0].gain_x = iq_point->gain_x + 1; 1717 compare_iq[0].phase_y = iq_point->phase_y; 1718 1719 rc = r820t_iq_tree(priv, compare_iq, compare_iq[0].gain_x, 1720 compare_iq[0].phase_y, 0x08); 1721 if (rc < 0) 1722 return rc; 1723 1724 r820t_compre_cor(compare_iq); 1725 1726 compare_bet[2] = compare_iq[0]; 1727 1728 r820t_compre_cor(compare_bet); 1729 1730 *iq_point = compare_bet[0]; 1731 1732 return 0; 1733} 1734 1735static int r820t_vga_adjust(struct r820t_priv *priv) 1736{ 1737 int rc; 1738 u8 vga_count; 1739 1740 /* increase vga power to let image significant */ 1741 for (vga_count = 12; vga_count < 16; vga_count++) { 1742 rc = r820t_write_reg_mask(priv, 0x0c, vga_count, 0x0f); 1743 if (rc < 0) 1744 return rc; 1745 1746 usleep_range(10000, 11000); 1747 1748 rc = r820t_multi_read(priv); 1749 if (rc < 0) 1750 return rc; 1751 1752 if (rc > 40 * 4) 1753 break; 1754 } 1755 1756 return 0; 1757} 1758 1759static int r820t_iq(struct r820t_priv *priv, struct r820t_sect_type *iq_pont) 1760{ 1761 struct r820t_sect_type compare_iq[3]; 1762 int rc; 1763 u8 x_direction = 0; /* 1:x, 0:y */ 1764 u8 dir_reg, other_reg; 1765 1766 r820t_vga_adjust(priv); 1767 1768 rc = r820t_imr_cross(priv, compare_iq, &x_direction); 1769 if (rc < 0) 1770 return rc; 1771 1772 if (x_direction == 1) { 1773 dir_reg = 0x08; 1774 other_reg = 0x09; 1775 } else { 1776 dir_reg = 0x09; 1777 other_reg = 0x08; 1778 } 1779 1780 /* compare and find min of 3 points. determine i/q direction */ 1781 r820t_compre_cor(compare_iq); 1782 1783 /* increase step to find min value of this direction */ 1784 rc = r820t_compre_step(priv, compare_iq, dir_reg); 1785 if (rc < 0) 1786 return rc; 1787 1788 /* the other direction */ 1789 rc = r820t_iq_tree(priv, compare_iq, compare_iq[0].gain_x, 1790 compare_iq[0].phase_y, dir_reg); 1791 if (rc < 0) 1792 return rc; 1793 1794 /* compare and find min of 3 points. determine i/q direction */ 1795 r820t_compre_cor(compare_iq); 1796 1797 /* increase step to find min value on this direction */ 1798 rc = r820t_compre_step(priv, compare_iq, other_reg); 1799 if (rc < 0) 1800 return rc; 1801 1802 /* check 3 points again */ 1803 rc = r820t_iq_tree(priv, compare_iq, compare_iq[0].gain_x, 1804 compare_iq[0].phase_y, other_reg); 1805 if (rc < 0) 1806 return rc; 1807 1808 r820t_compre_cor(compare_iq); 1809 1810 /* section-9 check */ 1811 rc = r820t_section(priv, compare_iq); 1812 1813 *iq_pont = compare_iq[0]; 1814 1815 /* reset gain/phase control setting */ 1816 rc = r820t_write_reg_mask(priv, 0x08, 0, 0x3f); 1817 if (rc < 0) 1818 return rc; 1819 1820 rc = r820t_write_reg_mask(priv, 0x09, 0, 0x3f); 1821 1822 return rc; 1823} 1824 1825static int r820t_f_imr(struct r820t_priv *priv, struct r820t_sect_type *iq_pont) 1826{ 1827 int rc; 1828 1829 r820t_vga_adjust(priv); 1830 1831 /* 1832 * search surrounding points from previous point 1833 * try (x-1), (x), (x+1) columns, and find min IMR result point 1834 */ 1835 rc = r820t_section(priv, iq_pont); 1836 if (rc < 0) 1837 return rc; 1838 1839 return 0; 1840} 1841 1842static int r820t_imr(struct r820t_priv *priv, unsigned imr_mem, bool im_flag) 1843{ 1844 struct r820t_sect_type imr_point; 1845 int rc; 1846 u32 ring_vco, ring_freq, ring_ref; 1847 u8 n_ring, n; 1848 int reg18, reg19, reg1f; 1849 1850 if (priv->cfg->xtal > 24000000) 1851 ring_ref = priv->cfg->xtal / 2; 1852 else 1853 ring_ref = priv->cfg->xtal; 1854 1855 for (n = 0; n < 16; n++) { 1856 if ((16 + n) * 8 * ring_ref >= 3100000) { 1857 n_ring = n; 1858 break; 1859 } 1860 1861 /* n_ring not found */ 1862 if (n == 15) 1863 n_ring = n; 1864 } 1865 1866 reg18 = r820t_read_cache_reg(priv, 0x18); 1867 reg19 = r820t_read_cache_reg(priv, 0x19); 1868 reg1f = r820t_read_cache_reg(priv, 0x1f); 1869 1870 reg18 &= 0xf0; /* set ring[3:0] */ 1871 reg18 |= n_ring; 1872 1873 ring_vco = (16 + n_ring) * 8 * ring_ref; 1874 1875 reg18 &= 0xdf; /* clear ring_se23 */ 1876 reg19 &= 0xfc; /* clear ring_seldiv */ 1877 reg1f &= 0xfc; /* clear ring_att */ 1878 1879 switch (imr_mem) { 1880 case 0: 1881 ring_freq = ring_vco / 48; 1882 reg18 |= 0x20; /* ring_se23 = 1 */ 1883 reg19 |= 0x03; /* ring_seldiv = 3 */ 1884 reg1f |= 0x02; /* ring_att 10 */ 1885 break; 1886 case 1: 1887 ring_freq = ring_vco / 16; 1888 reg18 |= 0x00; /* ring_se23 = 0 */ 1889 reg19 |= 0x02; /* ring_seldiv = 2 */ 1890 reg1f |= 0x00; /* pw_ring 00 */ 1891 break; 1892 case 2: 1893 ring_freq = ring_vco / 8; 1894 reg18 |= 0x00; /* ring_se23 = 0 */ 1895 reg19 |= 0x01; /* ring_seldiv = 1 */ 1896 reg1f |= 0x03; /* pw_ring 11 */ 1897 break; 1898 case 3: 1899 ring_freq = ring_vco / 6; 1900 reg18 |= 0x20; /* ring_se23 = 1 */ 1901 reg19 |= 0x00; /* ring_seldiv = 0 */ 1902 reg1f |= 0x03; /* pw_ring 11 */ 1903 break; 1904 case 4: 1905 ring_freq = ring_vco / 4; 1906 reg18 |= 0x00; /* ring_se23 = 0 */ 1907 reg19 |= 0x00; /* ring_seldiv = 0 */ 1908 reg1f |= 0x01; /* pw_ring 01 */ 1909 break; 1910 default: 1911 ring_freq = ring_vco / 4; 1912 reg18 |= 0x00; /* ring_se23 = 0 */ 1913 reg19 |= 0x00; /* ring_seldiv = 0 */ 1914 reg1f |= 0x01; /* pw_ring 01 */ 1915 break; 1916 } 1917 1918 1919 /* write pw_ring, n_ring, ringdiv2 registers */ 1920 1921 /* n_ring, ring_se23 */ 1922 rc = r820t_write_reg(priv, 0x18, reg18); 1923 if (rc < 0) 1924 return rc; 1925 1926 /* ring_sediv */ 1927 rc = r820t_write_reg(priv, 0x19, reg19); 1928 if (rc < 0) 1929 return rc; 1930 1931 /* pw_ring */ 1932 rc = r820t_write_reg(priv, 0x1f, reg1f); 1933 if (rc < 0) 1934 return rc; 1935 1936 /* mux input freq ~ rf_in freq */ 1937 rc = r820t_set_mux(priv, (ring_freq - 5300) * 1000); 1938 if (rc < 0) 1939 return rc; 1940 1941 rc = r820t_set_pll(priv, V4L2_TUNER_DIGITAL_TV, 1942 (ring_freq - 5300) * 1000); 1943 if (!priv->has_lock) 1944 rc = -EINVAL; 1945 if (rc < 0) 1946 return rc; 1947 1948 if (im_flag) { 1949 rc = r820t_iq(priv, &imr_point); 1950 } else { 1951 imr_point.gain_x = priv->imr_data[3].gain_x; 1952 imr_point.phase_y = priv->imr_data[3].phase_y; 1953 imr_point.value = priv->imr_data[3].value; 1954 1955 rc = r820t_f_imr(priv, &imr_point); 1956 } 1957 if (rc < 0) 1958 return rc; 1959 1960 /* save IMR value */ 1961 switch (imr_mem) { 1962 case 0: 1963 priv->imr_data[0].gain_x = imr_point.gain_x; 1964 priv->imr_data[0].phase_y = imr_point.phase_y; 1965 priv->imr_data[0].value = imr_point.value; 1966 break; 1967 case 1: 1968 priv->imr_data[1].gain_x = imr_point.gain_x; 1969 priv->imr_data[1].phase_y = imr_point.phase_y; 1970 priv->imr_data[1].value = imr_point.value; 1971 break; 1972 case 2: 1973 priv->imr_data[2].gain_x = imr_point.gain_x; 1974 priv->imr_data[2].phase_y = imr_point.phase_y; 1975 priv->imr_data[2].value = imr_point.value; 1976 break; 1977 case 3: 1978 priv->imr_data[3].gain_x = imr_point.gain_x; 1979 priv->imr_data[3].phase_y = imr_point.phase_y; 1980 priv->imr_data[3].value = imr_point.value; 1981 break; 1982 case 4: 1983 priv->imr_data[4].gain_x = imr_point.gain_x; 1984 priv->imr_data[4].phase_y = imr_point.phase_y; 1985 priv->imr_data[4].value = imr_point.value; 1986 break; 1987 default: 1988 priv->imr_data[4].gain_x = imr_point.gain_x; 1989 priv->imr_data[4].phase_y = imr_point.phase_y; 1990 priv->imr_data[4].value = imr_point.value; 1991 break; 1992 } 1993 1994 return 0; 1995} 1996 1997static int r820t_imr_callibrate(struct r820t_priv *priv) 1998{ 1999 int rc, i; 2000 int xtal_cap = 0; 2001 2002 if (priv->imr_done) 2003 return 0; 2004 2005 /* Initialize registers */ 2006 rc = r820t_write(priv, 0x05, 2007 r820t_init_array, sizeof(r820t_init_array)); 2008 if (rc < 0) 2009 return rc; 2010 2011 /* Detect Xtal capacitance */ 2012 if ((priv->cfg->rafael_chip == CHIP_R820T) || 2013 (priv->cfg->rafael_chip == CHIP_R828S) || 2014 (priv->cfg->rafael_chip == CHIP_R820C)) { 2015 priv->xtal_cap_sel = XTAL_HIGH_CAP_0P; 2016 } else { 2017 for (i = 0; i < 3; i++) { 2018 rc = r820t_xtal_check(priv); 2019 if (rc < 0) 2020 return rc; 2021 if (!i || rc > xtal_cap) 2022 xtal_cap = rc; 2023 } 2024 priv->xtal_cap_sel = xtal_cap; 2025 } 2026 2027 /* Initialize registers */ 2028 rc = r820t_write(priv, 0x05, 2029 r820t_init_array, sizeof(r820t_init_array)); 2030 if (rc < 0) 2031 return rc; 2032 2033 rc = r820t_imr_prepare(priv); 2034 if (rc < 0) 2035 return rc; 2036 2037 rc = r820t_imr(priv, 3, true); 2038 if (rc < 0) 2039 return rc; 2040 rc = r820t_imr(priv, 1, false); 2041 if (rc < 0) 2042 return rc; 2043 rc = r820t_imr(priv, 0, false); 2044 if (rc < 0) 2045 return rc; 2046 rc = r820t_imr(priv, 2, false); 2047 if (rc < 0) 2048 return rc; 2049 rc = r820t_imr(priv, 4, false); 2050 if (rc < 0) 2051 return rc; 2052 2053 priv->imr_done = true; 2054 2055 return 0; 2056} 2057 2058/* 2059 * r820t frontend operations and tuner attach code 2060 * 2061 * All driver locks and i2c control are only in this part of the code 2062 */ 2063 2064static int r820t_init(struct dvb_frontend *fe) 2065{ 2066 struct r820t_priv *priv = fe->tuner_priv; 2067 int rc; 2068 2069 tuner_dbg("%s:\n", __func__); 2070 2071 mutex_lock(&priv->lock); 2072 if (fe->ops.i2c_gate_ctrl) 2073 fe->ops.i2c_gate_ctrl(fe, 1); 2074 2075 rc = r820t_imr_callibrate(priv); 2076 if (rc < 0) 2077 goto err; 2078 2079 /* Initialize registers */ 2080 rc = r820t_write(priv, 0x05, 2081 r820t_init_array, sizeof(r820t_init_array)); 2082 2083err: 2084 if (fe->ops.i2c_gate_ctrl) 2085 fe->ops.i2c_gate_ctrl(fe, 0); 2086 mutex_unlock(&priv->lock); 2087 2088 if (rc < 0) 2089 tuner_dbg("%s: failed=%d\n", __func__, rc); 2090 return rc; 2091} 2092 2093static int r820t_sleep(struct dvb_frontend *fe) 2094{ 2095 struct r820t_priv *priv = fe->tuner_priv; 2096 int rc; 2097 2098 tuner_dbg("%s:\n", __func__); 2099 2100 mutex_lock(&priv->lock); 2101 if (fe->ops.i2c_gate_ctrl) 2102 fe->ops.i2c_gate_ctrl(fe, 1); 2103 2104 rc = r820t_standby(priv); 2105 2106 if (fe->ops.i2c_gate_ctrl) 2107 fe->ops.i2c_gate_ctrl(fe, 0); 2108 mutex_unlock(&priv->lock); 2109 2110 tuner_dbg("%s: failed=%d\n", __func__, rc); 2111 return rc; 2112} 2113 2114static int r820t_set_analog_freq(struct dvb_frontend *fe, 2115 struct analog_parameters *p) 2116{ 2117 struct r820t_priv *priv = fe->tuner_priv; 2118 unsigned bw; 2119 int rc; 2120 2121 tuner_dbg("%s called\n", __func__); 2122 2123 /* if std is not defined, choose one */ 2124 if (!p->std) 2125 p->std = V4L2_STD_MN; 2126 2127 if ((p->std == V4L2_STD_PAL_M) || (p->std == V4L2_STD_NTSC)) 2128 bw = 6; 2129 else 2130 bw = 8; 2131 2132 mutex_lock(&priv->lock); 2133 if (fe->ops.i2c_gate_ctrl) 2134 fe->ops.i2c_gate_ctrl(fe, 1); 2135 2136 rc = generic_set_freq(fe, 62500l * p->frequency, bw, 2137 V4L2_TUNER_ANALOG_TV, p->std, SYS_UNDEFINED); 2138 2139 if (fe->ops.i2c_gate_ctrl) 2140 fe->ops.i2c_gate_ctrl(fe, 0); 2141 mutex_unlock(&priv->lock); 2142 2143 return rc; 2144} 2145 2146static int r820t_set_params(struct dvb_frontend *fe) 2147{ 2148 struct r820t_priv *priv = fe->tuner_priv; 2149 struct dtv_frontend_properties *c = &fe->dtv_property_cache; 2150 int rc; 2151 unsigned bw; 2152 2153 tuner_dbg("%s: delivery_system=%d frequency=%d bandwidth_hz=%d\n", 2154 __func__, c->delivery_system, c->frequency, c->bandwidth_hz); 2155 2156 mutex_lock(&priv->lock); 2157 if (fe->ops.i2c_gate_ctrl) 2158 fe->ops.i2c_gate_ctrl(fe, 1); 2159 2160 bw = (c->bandwidth_hz + 500000) / 1000000; 2161 if (!bw) 2162 bw = 8; 2163 2164 rc = generic_set_freq(fe, c->frequency, bw, 2165 V4L2_TUNER_DIGITAL_TV, 0, c->delivery_system); 2166 2167 if (fe->ops.i2c_gate_ctrl) 2168 fe->ops.i2c_gate_ctrl(fe, 0); 2169 mutex_unlock(&priv->lock); 2170 2171 if (rc) 2172 tuner_dbg("%s: failed=%d\n", __func__, rc); 2173 return rc; 2174} 2175 2176static int r820t_signal(struct dvb_frontend *fe, u16 *strength) 2177{ 2178 struct r820t_priv *priv = fe->tuner_priv; 2179 int rc = 0; 2180 2181 mutex_lock(&priv->lock); 2182 if (fe->ops.i2c_gate_ctrl) 2183 fe->ops.i2c_gate_ctrl(fe, 1); 2184 2185 if (priv->has_lock) { 2186 rc = r820t_read_gain(priv); 2187 if (rc < 0) 2188 goto err; 2189 2190 /* A higher gain at LNA means a lower signal strength */ 2191 *strength = (45 - rc) << 4 | 0xff; 2192 if (*strength == 0xff) 2193 *strength = 0; 2194 } else { 2195 *strength = 0; 2196 } 2197 2198err: 2199 if (fe->ops.i2c_gate_ctrl) 2200 fe->ops.i2c_gate_ctrl(fe, 0); 2201 mutex_unlock(&priv->lock); 2202 2203 tuner_dbg("%s: %s, gain=%d strength=%d\n", 2204 __func__, 2205 priv->has_lock ? "PLL locked" : "no signal", 2206 rc, *strength); 2207 2208 return 0; 2209} 2210 2211static int r820t_get_if_frequency(struct dvb_frontend *fe, u32 *frequency) 2212{ 2213 struct r820t_priv *priv = fe->tuner_priv; 2214 2215 tuner_dbg("%s:\n", __func__); 2216 2217 *frequency = priv->int_freq; 2218 2219 return 0; 2220} 2221 2222static int r820t_release(struct dvb_frontend *fe) 2223{ 2224 struct r820t_priv *priv = fe->tuner_priv; 2225 2226 tuner_dbg("%s:\n", __func__); 2227 2228 mutex_lock(&r820t_list_mutex); 2229 2230 if (priv) 2231 hybrid_tuner_release_state(priv); 2232 2233 mutex_unlock(&r820t_list_mutex); 2234 2235 fe->tuner_priv = NULL; 2236 2237 kfree(fe->tuner_priv); 2238 2239 return 0; 2240} 2241 2242static const struct dvb_tuner_ops r820t_tuner_ops = { 2243 .info = { 2244 .name = "Rafael Micro R820T", 2245 .frequency_min = 42000000, 2246 .frequency_max = 1002000000, 2247 }, 2248 .init = r820t_init, 2249 .release = r820t_release, 2250 .sleep = r820t_sleep, 2251 .set_params = r820t_set_params, 2252 .set_analog_params = r820t_set_analog_freq, 2253 .get_if_frequency = r820t_get_if_frequency, 2254 .get_rf_strength = r820t_signal, 2255}; 2256 2257struct dvb_frontend *r820t_attach(struct dvb_frontend *fe, 2258 struct i2c_adapter *i2c, 2259 const struct r820t_config *cfg) 2260{ 2261 struct r820t_priv *priv; 2262 int rc = -ENODEV; 2263 u8 data[5]; 2264 int instance; 2265 2266 mutex_lock(&r820t_list_mutex); 2267 2268 instance = hybrid_tuner_request_state(struct r820t_priv, priv, 2269 hybrid_tuner_instance_list, 2270 i2c, cfg->i2c_addr, 2271 "r820t"); 2272 switch (instance) { 2273 case 0: 2274 /* memory allocation failure */ 2275 goto err_no_gate; 2276 break; 2277 case 1: 2278 /* new tuner instance */ 2279 priv->cfg = cfg; 2280 2281 mutex_init(&priv->lock); 2282 2283 fe->tuner_priv = priv; 2284 break; 2285 case 2: 2286 /* existing tuner instance */ 2287 fe->tuner_priv = priv; 2288 break; 2289 } 2290 2291 memcpy(&fe->ops.tuner_ops, &r820t_tuner_ops, sizeof(r820t_tuner_ops)); 2292 2293 if (fe->ops.i2c_gate_ctrl) 2294 fe->ops.i2c_gate_ctrl(fe, 1); 2295 2296 /* check if the tuner is there */ 2297 rc = r820t_read(priv, 0x00, data, sizeof(data)); 2298 if (rc < 0) 2299 goto err; 2300 2301 rc = r820t_sleep(fe); 2302 if (rc < 0) 2303 goto err; 2304 2305 tuner_info("Rafael Micro r820t successfully identified\n"); 2306 2307 fe->tuner_priv = priv; 2308 memcpy(&fe->ops.tuner_ops, &r820t_tuner_ops, 2309 sizeof(struct dvb_tuner_ops)); 2310 2311 if (fe->ops.i2c_gate_ctrl) 2312 fe->ops.i2c_gate_ctrl(fe, 0); 2313 2314 mutex_unlock(&r820t_list_mutex); 2315 2316 return fe; 2317err: 2318 if (fe->ops.i2c_gate_ctrl) 2319 fe->ops.i2c_gate_ctrl(fe, 0); 2320 2321err_no_gate: 2322 mutex_unlock(&r820t_list_mutex); 2323 2324 tuner_info("%s: failed=%d\n", __func__, rc); 2325 r820t_release(fe); 2326 return NULL; 2327} 2328EXPORT_SYMBOL_GPL(r820t_attach); 2329 2330MODULE_DESCRIPTION("Rafael Micro r820t silicon tuner driver"); 2331MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>"); 2332MODULE_LICENSE("GPL"); 2333