twl4030-irq.c revision f01b1f90bf46ddaf2a68215a9489364c974e5689
1/* 2 * twl4030-irq.c - TWL4030/TPS659x0 irq support 3 * 4 * Copyright (C) 2005-2006 Texas Instruments, Inc. 5 * 6 * Modifications to defer interrupt handling to a kernel thread: 7 * Copyright (C) 2006 MontaVista Software, Inc. 8 * 9 * Based on tlv320aic23.c: 10 * Copyright (c) by Kai Svahn <kai.svahn@nokia.com> 11 * 12 * Code cleanup and modifications to IRQ handler. 13 * by syed khasim <x0khasim@ti.com> 14 * 15 * This program is free software; you can redistribute it and/or modify 16 * it under the terms of the GNU General Public License as published by 17 * the Free Software Foundation; either version 2 of the License, or 18 * (at your option) any later version. 19 * 20 * This program is distributed in the hope that it will be useful, 21 * but WITHOUT ANY WARRANTY; without even the implied warranty of 22 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 23 * GNU General Public License for more details. 24 * 25 * You should have received a copy of the GNU General Public License 26 * along with this program; if not, write to the Free Software 27 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA 28 */ 29 30#include <linux/init.h> 31#include <linux/export.h> 32#include <linux/interrupt.h> 33#include <linux/irq.h> 34#include <linux/slab.h> 35 36#include <linux/of.h> 37#include <linux/irqdomain.h> 38#include <linux/i2c/twl.h> 39 40#include "twl-core.h" 41 42/* 43 * TWL4030 IRQ handling has two stages in hardware, and thus in software. 44 * The Primary Interrupt Handler (PIH) stage exposes status bits saying 45 * which Secondary Interrupt Handler (SIH) stage is raising an interrupt. 46 * SIH modules are more traditional IRQ components, which support per-IRQ 47 * enable/disable and trigger controls; they do most of the work. 48 * 49 * These chips are designed to support IRQ handling from two different 50 * I2C masters. Each has a dedicated IRQ line, and dedicated IRQ status 51 * and mask registers in the PIH and SIH modules. 52 * 53 * We set up IRQs starting at a platform-specified base, always starting 54 * with PIH and the SIH for PWR_INT and then usually adding GPIO: 55 * base + 0 .. base + 7 PIH 56 * base + 8 .. base + 15 SIH for PWR_INT 57 * base + 16 .. base + 33 SIH for GPIO 58 */ 59#define TWL4030_CORE_NR_IRQS 8 60#define TWL4030_PWR_NR_IRQS 8 61 62/* PIH register offsets */ 63#define REG_PIH_ISR_P1 0x01 64#define REG_PIH_ISR_P2 0x02 65#define REG_PIH_SIR 0x03 /* for testing */ 66 67/* Linux could (eventually) use either IRQ line */ 68static int irq_line; 69 70struct sih { 71 char name[8]; 72 u8 module; /* module id */ 73 u8 control_offset; /* for SIH_CTRL */ 74 bool set_cor; 75 76 u8 bits; /* valid in isr/imr */ 77 u8 bytes_ixr; /* bytelen of ISR/IMR/SIR */ 78 79 u8 edr_offset; 80 u8 bytes_edr; /* bytelen of EDR */ 81 82 u8 irq_lines; /* number of supported irq lines */ 83 84 /* SIR ignored -- set interrupt, for testing only */ 85 struct sih_irq_data { 86 u8 isr_offset; 87 u8 imr_offset; 88 } mask[2]; 89 /* + 2 bytes padding */ 90}; 91 92static const struct sih *sih_modules; 93static int nr_sih_modules; 94 95#define SIH_INITIALIZER(modname, nbits) \ 96 .module = TWL4030_MODULE_ ## modname, \ 97 .control_offset = TWL4030_ ## modname ## _SIH_CTRL, \ 98 .bits = nbits, \ 99 .bytes_ixr = DIV_ROUND_UP(nbits, 8), \ 100 .edr_offset = TWL4030_ ## modname ## _EDR, \ 101 .bytes_edr = DIV_ROUND_UP((2*(nbits)), 8), \ 102 .irq_lines = 2, \ 103 .mask = { { \ 104 .isr_offset = TWL4030_ ## modname ## _ISR1, \ 105 .imr_offset = TWL4030_ ## modname ## _IMR1, \ 106 }, \ 107 { \ 108 .isr_offset = TWL4030_ ## modname ## _ISR2, \ 109 .imr_offset = TWL4030_ ## modname ## _IMR2, \ 110 }, }, 111 112/* register naming policies are inconsistent ... */ 113#define TWL4030_INT_PWR_EDR TWL4030_INT_PWR_EDR1 114#define TWL4030_MODULE_KEYPAD_KEYP TWL4030_MODULE_KEYPAD 115#define TWL4030_MODULE_INT_PWR TWL4030_MODULE_INT 116 117 118/* 119 * Order in this table matches order in PIH_ISR. That is, 120 * BIT(n) in PIH_ISR is sih_modules[n]. 121 */ 122/* sih_modules_twl4030 is used both in twl4030 and twl5030 */ 123static const struct sih sih_modules_twl4030[6] = { 124 [0] = { 125 .name = "gpio", 126 .module = TWL4030_MODULE_GPIO, 127 .control_offset = REG_GPIO_SIH_CTRL, 128 .set_cor = true, 129 .bits = TWL4030_GPIO_MAX, 130 .bytes_ixr = 3, 131 /* Note: *all* of these IRQs default to no-trigger */ 132 .edr_offset = REG_GPIO_EDR1, 133 .bytes_edr = 5, 134 .irq_lines = 2, 135 .mask = { { 136 .isr_offset = REG_GPIO_ISR1A, 137 .imr_offset = REG_GPIO_IMR1A, 138 }, { 139 .isr_offset = REG_GPIO_ISR1B, 140 .imr_offset = REG_GPIO_IMR1B, 141 }, }, 142 }, 143 [1] = { 144 .name = "keypad", 145 .set_cor = true, 146 SIH_INITIALIZER(KEYPAD_KEYP, 4) 147 }, 148 [2] = { 149 .name = "bci", 150 .module = TWL4030_MODULE_INTERRUPTS, 151 .control_offset = TWL4030_INTERRUPTS_BCISIHCTRL, 152 .set_cor = true, 153 .bits = 12, 154 .bytes_ixr = 2, 155 .edr_offset = TWL4030_INTERRUPTS_BCIEDR1, 156 /* Note: most of these IRQs default to no-trigger */ 157 .bytes_edr = 3, 158 .irq_lines = 2, 159 .mask = { { 160 .isr_offset = TWL4030_INTERRUPTS_BCIISR1A, 161 .imr_offset = TWL4030_INTERRUPTS_BCIIMR1A, 162 }, { 163 .isr_offset = TWL4030_INTERRUPTS_BCIISR1B, 164 .imr_offset = TWL4030_INTERRUPTS_BCIIMR1B, 165 }, }, 166 }, 167 [3] = { 168 .name = "madc", 169 SIH_INITIALIZER(MADC, 4) 170 }, 171 [4] = { 172 /* USB doesn't use the same SIH organization */ 173 .name = "usb", 174 }, 175 [5] = { 176 .name = "power", 177 .set_cor = true, 178 SIH_INITIALIZER(INT_PWR, 8) 179 }, 180 /* there are no SIH modules #6 or #7 ... */ 181}; 182 183static const struct sih sih_modules_twl5031[8] = { 184 [0] = { 185 .name = "gpio", 186 .module = TWL4030_MODULE_GPIO, 187 .control_offset = REG_GPIO_SIH_CTRL, 188 .set_cor = true, 189 .bits = TWL4030_GPIO_MAX, 190 .bytes_ixr = 3, 191 /* Note: *all* of these IRQs default to no-trigger */ 192 .edr_offset = REG_GPIO_EDR1, 193 .bytes_edr = 5, 194 .irq_lines = 2, 195 .mask = { { 196 .isr_offset = REG_GPIO_ISR1A, 197 .imr_offset = REG_GPIO_IMR1A, 198 }, { 199 .isr_offset = REG_GPIO_ISR1B, 200 .imr_offset = REG_GPIO_IMR1B, 201 }, }, 202 }, 203 [1] = { 204 .name = "keypad", 205 .set_cor = true, 206 SIH_INITIALIZER(KEYPAD_KEYP, 4) 207 }, 208 [2] = { 209 .name = "bci", 210 .module = TWL5031_MODULE_INTERRUPTS, 211 .control_offset = TWL5031_INTERRUPTS_BCISIHCTRL, 212 .bits = 7, 213 .bytes_ixr = 1, 214 .edr_offset = TWL5031_INTERRUPTS_BCIEDR1, 215 /* Note: most of these IRQs default to no-trigger */ 216 .bytes_edr = 2, 217 .irq_lines = 2, 218 .mask = { { 219 .isr_offset = TWL5031_INTERRUPTS_BCIISR1, 220 .imr_offset = TWL5031_INTERRUPTS_BCIIMR1, 221 }, { 222 .isr_offset = TWL5031_INTERRUPTS_BCIISR2, 223 .imr_offset = TWL5031_INTERRUPTS_BCIIMR2, 224 }, }, 225 }, 226 [3] = { 227 .name = "madc", 228 SIH_INITIALIZER(MADC, 4) 229 }, 230 [4] = { 231 /* USB doesn't use the same SIH organization */ 232 .name = "usb", 233 }, 234 [5] = { 235 .name = "power", 236 .set_cor = true, 237 SIH_INITIALIZER(INT_PWR, 8) 238 }, 239 [6] = { 240 /* 241 * ECI/DBI doesn't use the same SIH organization. 242 * For example, it supports only one interrupt output line. 243 * That is, the interrupts are seen on both INT1 and INT2 lines. 244 */ 245 .name = "eci_dbi", 246 .module = TWL5031_MODULE_ACCESSORY, 247 .bits = 9, 248 .bytes_ixr = 2, 249 .irq_lines = 1, 250 .mask = { { 251 .isr_offset = TWL5031_ACIIDR_LSB, 252 .imr_offset = TWL5031_ACIIMR_LSB, 253 }, }, 254 255 }, 256 [7] = { 257 /* Audio accessory */ 258 .name = "audio", 259 .module = TWL5031_MODULE_ACCESSORY, 260 .control_offset = TWL5031_ACCSIHCTRL, 261 .bits = 2, 262 .bytes_ixr = 1, 263 .edr_offset = TWL5031_ACCEDR1, 264 /* Note: most of these IRQs default to no-trigger */ 265 .bytes_edr = 1, 266 .irq_lines = 2, 267 .mask = { { 268 .isr_offset = TWL5031_ACCISR1, 269 .imr_offset = TWL5031_ACCIMR1, 270 }, { 271 .isr_offset = TWL5031_ACCISR2, 272 .imr_offset = TWL5031_ACCIMR2, 273 }, }, 274 }, 275}; 276 277#undef TWL4030_MODULE_KEYPAD_KEYP 278#undef TWL4030_MODULE_INT_PWR 279#undef TWL4030_INT_PWR_EDR 280 281/*----------------------------------------------------------------------*/ 282 283static unsigned twl4030_irq_base; 284 285/* 286 * handle_twl4030_pih() is the desc->handle method for the twl4030 interrupt. 287 * This is a chained interrupt, so there is no desc->action method for it. 288 * Now we need to query the interrupt controller in the twl4030 to determine 289 * which module is generating the interrupt request. However, we can't do i2c 290 * transactions in interrupt context, so we must defer that work to a kernel 291 * thread. All we do here is acknowledge and mask the interrupt and wakeup 292 * the kernel thread. 293 */ 294static irqreturn_t handle_twl4030_pih(int irq, void *devid) 295{ 296 int module_irq; 297 irqreturn_t ret; 298 u8 pih_isr; 299 300 ret = twl_i2c_read_u8(TWL4030_MODULE_PIH, &pih_isr, 301 REG_PIH_ISR_P1); 302 if (ret) { 303 pr_warning("twl4030: I2C error %d reading PIH ISR\n", ret); 304 return IRQ_NONE; 305 } 306 307 /* these handlers deal with the relevant SIH irq status */ 308 for (module_irq = twl4030_irq_base; 309 pih_isr; 310 pih_isr >>= 1, module_irq++) { 311 if (pih_isr & 0x1) 312 handle_nested_irq(module_irq); 313 } 314 315 return IRQ_HANDLED; 316} 317 318/*----------------------------------------------------------------------*/ 319 320/* 321 * twl4030_init_sih_modules() ... start from a known state where no 322 * IRQs will be coming in, and where we can quickly enable them then 323 * handle them as they arrive. Mask all IRQs: maybe init SIH_CTRL. 324 * 325 * NOTE: we don't touch EDR registers here; they stay with hardware 326 * defaults or whatever the last value was. Note that when both EDR 327 * bits for an IRQ are clear, that's as if its IMR bit is set... 328 */ 329static int twl4030_init_sih_modules(unsigned line) 330{ 331 const struct sih *sih; 332 u8 buf[4]; 333 int i; 334 int status; 335 336 /* line 0 == int1_n signal; line 1 == int2_n signal */ 337 if (line > 1) 338 return -EINVAL; 339 340 irq_line = line; 341 342 /* disable all interrupts on our line */ 343 memset(buf, 0xff, sizeof buf); 344 sih = sih_modules; 345 for (i = 0; i < nr_sih_modules; i++, sih++) { 346 /* skip USB -- it's funky */ 347 if (!sih->bytes_ixr) 348 continue; 349 350 /* Not all the SIH modules support multiple interrupt lines */ 351 if (sih->irq_lines <= line) 352 continue; 353 354 status = twl_i2c_write(sih->module, buf, 355 sih->mask[line].imr_offset, sih->bytes_ixr); 356 if (status < 0) 357 pr_err("twl4030: err %d initializing %s %s\n", 358 status, sih->name, "IMR"); 359 360 /* 361 * Maybe disable "exclusive" mode; buffer second pending irq; 362 * set Clear-On-Read (COR) bit. 363 * 364 * NOTE that sometimes COR polarity is documented as being 365 * inverted: for MADC, COR=1 means "clear on write". 366 * And for PWR_INT it's not documented... 367 */ 368 if (sih->set_cor) { 369 status = twl_i2c_write_u8(sih->module, 370 TWL4030_SIH_CTRL_COR_MASK, 371 sih->control_offset); 372 if (status < 0) 373 pr_err("twl4030: err %d initializing %s %s\n", 374 status, sih->name, "SIH_CTRL"); 375 } 376 } 377 378 sih = sih_modules; 379 for (i = 0; i < nr_sih_modules; i++, sih++) { 380 u8 rxbuf[4]; 381 int j; 382 383 /* skip USB */ 384 if (!sih->bytes_ixr) 385 continue; 386 387 /* Not all the SIH modules support multiple interrupt lines */ 388 if (sih->irq_lines <= line) 389 continue; 390 391 /* 392 * Clear pending interrupt status. Either the read was 393 * enough, or we need to write those bits. Repeat, in 394 * case an IRQ is pending (PENDDIS=0) ... that's not 395 * uncommon with PWR_INT.PWRON. 396 */ 397 for (j = 0; j < 2; j++) { 398 status = twl_i2c_read(sih->module, rxbuf, 399 sih->mask[line].isr_offset, sih->bytes_ixr); 400 if (status < 0) 401 pr_err("twl4030: err %d initializing %s %s\n", 402 status, sih->name, "ISR"); 403 404 if (!sih->set_cor) 405 status = twl_i2c_write(sih->module, buf, 406 sih->mask[line].isr_offset, 407 sih->bytes_ixr); 408 /* 409 * else COR=1 means read sufficed. 410 * (for most SIH modules...) 411 */ 412 } 413 } 414 415 return 0; 416} 417 418static inline void activate_irq(int irq) 419{ 420#ifdef CONFIG_ARM 421 /* 422 * ARM requires an extra step to clear IRQ_NOREQUEST, which it 423 * sets on behalf of every irq_chip. Also sets IRQ_NOPROBE. 424 */ 425 set_irq_flags(irq, IRQF_VALID); 426#else 427 /* same effect on other architectures */ 428 irq_set_noprobe(irq); 429#endif 430} 431 432/*----------------------------------------------------------------------*/ 433 434struct sih_agent { 435 int irq_base; 436 const struct sih *sih; 437 438 u32 imr; 439 bool imr_change_pending; 440 441 u32 edge_change; 442 443 struct mutex irq_lock; 444 char *irq_name; 445}; 446 447/*----------------------------------------------------------------------*/ 448 449/* 450 * All irq_chip methods get issued from code holding irq_desc[irq].lock, 451 * which can't perform the underlying I2C operations (because they sleep). 452 * So we must hand them off to a thread (workqueue) and cope with asynch 453 * completion, potentially including some re-ordering, of these requests. 454 */ 455 456static void twl4030_sih_mask(struct irq_data *data) 457{ 458 struct sih_agent *agent = irq_data_get_irq_chip_data(data); 459 460 agent->imr |= BIT(data->irq - agent->irq_base); 461 agent->imr_change_pending = true; 462} 463 464static void twl4030_sih_unmask(struct irq_data *data) 465{ 466 struct sih_agent *agent = irq_data_get_irq_chip_data(data); 467 468 agent->imr &= ~BIT(data->irq - agent->irq_base); 469 agent->imr_change_pending = true; 470} 471 472static int twl4030_sih_set_type(struct irq_data *data, unsigned trigger) 473{ 474 struct sih_agent *agent = irq_data_get_irq_chip_data(data); 475 476 if (trigger & ~(IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_EDGE_RISING)) 477 return -EINVAL; 478 479 if (irqd_get_trigger_type(data) != trigger) 480 agent->edge_change |= BIT(data->irq - agent->irq_base); 481 482 return 0; 483} 484 485static void twl4030_sih_bus_lock(struct irq_data *data) 486{ 487 struct sih_agent *agent = irq_data_get_irq_chip_data(data); 488 489 mutex_lock(&agent->irq_lock); 490} 491 492static void twl4030_sih_bus_sync_unlock(struct irq_data *data) 493{ 494 struct sih_agent *agent = irq_data_get_irq_chip_data(data); 495 const struct sih *sih = agent->sih; 496 int status; 497 498 if (agent->imr_change_pending) { 499 union { 500 u32 word; 501 u8 bytes[4]; 502 } imr; 503 504 /* byte[0] gets overwritten as we write ... */ 505 imr.word = cpu_to_le32(agent->imr << 8); 506 agent->imr_change_pending = false; 507 508 /* write the whole mask ... simpler than subsetting it */ 509 status = twl_i2c_write(sih->module, imr.bytes, 510 sih->mask[irq_line].imr_offset, 511 sih->bytes_ixr); 512 if (status) 513 pr_err("twl4030: %s, %s --> %d\n", __func__, 514 "write", status); 515 } 516 517 if (agent->edge_change) { 518 u32 edge_change; 519 u8 bytes[6]; 520 521 edge_change = agent->edge_change; 522 agent->edge_change = 0; 523 524 /* 525 * Read, reserving first byte for write scratch. Yes, this 526 * could be cached for some speedup ... but be careful about 527 * any processor on the other IRQ line, EDR registers are 528 * shared. 529 */ 530 status = twl_i2c_read(sih->module, bytes + 1, 531 sih->edr_offset, sih->bytes_edr); 532 if (status) { 533 pr_err("twl4030: %s, %s --> %d\n", __func__, 534 "read", status); 535 return; 536 } 537 538 /* Modify only the bits we know must change */ 539 while (edge_change) { 540 int i = fls(edge_change) - 1; 541 struct irq_data *idata; 542 int byte = 1 + (i >> 2); 543 int off = (i & 0x3) * 2; 544 unsigned int type; 545 546 idata = irq_get_irq_data(i + agent->irq_base); 547 548 bytes[byte] &= ~(0x03 << off); 549 550 type = irqd_get_trigger_type(idata); 551 if (type & IRQ_TYPE_EDGE_RISING) 552 bytes[byte] |= BIT(off + 1); 553 if (type & IRQ_TYPE_EDGE_FALLING) 554 bytes[byte] |= BIT(off + 0); 555 556 edge_change &= ~BIT(i); 557 } 558 559 /* Write */ 560 status = twl_i2c_write(sih->module, bytes, 561 sih->edr_offset, sih->bytes_edr); 562 if (status) 563 pr_err("twl4030: %s, %s --> %d\n", __func__, 564 "write", status); 565 } 566 567 mutex_unlock(&agent->irq_lock); 568} 569 570static struct irq_chip twl4030_sih_irq_chip = { 571 .name = "twl4030", 572 .irq_mask = twl4030_sih_mask, 573 .irq_unmask = twl4030_sih_unmask, 574 .irq_set_type = twl4030_sih_set_type, 575 .irq_bus_lock = twl4030_sih_bus_lock, 576 .irq_bus_sync_unlock = twl4030_sih_bus_sync_unlock, 577}; 578 579/*----------------------------------------------------------------------*/ 580 581static inline int sih_read_isr(const struct sih *sih) 582{ 583 int status; 584 union { 585 u8 bytes[4]; 586 u32 word; 587 } isr; 588 589 /* FIXME need retry-on-error ... */ 590 591 isr.word = 0; 592 status = twl_i2c_read(sih->module, isr.bytes, 593 sih->mask[irq_line].isr_offset, sih->bytes_ixr); 594 595 return (status < 0) ? status : le32_to_cpu(isr.word); 596} 597 598/* 599 * Generic handler for SIH interrupts ... we "know" this is called 600 * in task context, with IRQs enabled. 601 */ 602static irqreturn_t handle_twl4030_sih(int irq, void *data) 603{ 604 struct sih_agent *agent = irq_get_handler_data(irq); 605 const struct sih *sih = agent->sih; 606 int isr; 607 608 /* reading ISR acks the IRQs, using clear-on-read mode */ 609 isr = sih_read_isr(sih); 610 611 if (isr < 0) { 612 pr_err("twl4030: %s SIH, read ISR error %d\n", 613 sih->name, isr); 614 /* REVISIT: recover; eventually mask it all, etc */ 615 return IRQ_HANDLED; 616 } 617 618 while (isr) { 619 irq = fls(isr); 620 irq--; 621 isr &= ~BIT(irq); 622 623 if (irq < sih->bits) 624 handle_nested_irq(agent->irq_base + irq); 625 else 626 pr_err("twl4030: %s SIH, invalid ISR bit %d\n", 627 sih->name, irq); 628 } 629 return IRQ_HANDLED; 630} 631 632/* returns the first IRQ used by this SIH bank, or negative errno */ 633int twl4030_sih_setup(struct device *dev, int module, int irq_base) 634{ 635 int sih_mod; 636 const struct sih *sih = NULL; 637 struct sih_agent *agent; 638 int i, irq; 639 int status = -EINVAL; 640 641 /* only support modules with standard clear-on-read for now */ 642 for (sih_mod = 0, sih = sih_modules; 643 sih_mod < nr_sih_modules; 644 sih_mod++, sih++) { 645 if (sih->module == module && sih->set_cor) { 646 status = 0; 647 break; 648 } 649 } 650 if (status < 0) 651 return status; 652 653 agent = kzalloc(sizeof *agent, GFP_KERNEL); 654 if (!agent) 655 return -ENOMEM; 656 657 agent->irq_base = irq_base; 658 agent->sih = sih; 659 agent->imr = ~0; 660 mutex_init(&agent->irq_lock); 661 662 for (i = 0; i < sih->bits; i++) { 663 irq = irq_base + i; 664 665 irq_set_chip_data(irq, agent); 666 irq_set_chip_and_handler(irq, &twl4030_sih_irq_chip, 667 handle_edge_irq); 668 irq_set_nested_thread(irq, 1); 669 activate_irq(irq); 670 } 671 672 /* replace generic PIH handler (handle_simple_irq) */ 673 irq = sih_mod + twl4030_irq_base; 674 irq_set_handler_data(irq, agent); 675 agent->irq_name = kasprintf(GFP_KERNEL, "twl4030_%s", sih->name); 676 status = request_threaded_irq(irq, NULL, handle_twl4030_sih, 0, 677 agent->irq_name ?: sih->name, NULL); 678 679 pr_info("twl4030: %s (irq %d) chaining IRQs %d..%d\n", sih->name, 680 irq, irq_base, irq_base + i - 1); 681 682 return status < 0 ? status : irq_base; 683} 684 685/* FIXME need a call to reverse twl4030_sih_setup() ... */ 686 687/*----------------------------------------------------------------------*/ 688 689/* FIXME pass in which interrupt line we'll use ... */ 690#define twl_irq_line 0 691 692int twl4030_init_irq(struct device *dev, int irq_num) 693{ 694 static struct irq_chip twl4030_irq_chip; 695 int irq_base, irq_end, nr_irqs; 696 struct device_node *node = dev->of_node; 697 698 int status; 699 int i; 700 701 /* 702 * TWL core and pwr interrupts must be contiguous because 703 * the hwirqs numbers are defined contiguously from 1 to 15. 704 * Create only one domain for both. 705 */ 706 nr_irqs = TWL4030_PWR_NR_IRQS + TWL4030_CORE_NR_IRQS; 707 708 irq_base = irq_alloc_descs(-1, 0, nr_irqs, 0); 709 if (IS_ERR_VALUE(irq_base)) { 710 dev_err(dev, "Fail to allocate IRQ descs\n"); 711 return irq_base; 712 } 713 714 irq_domain_add_legacy(node, nr_irqs, irq_base, 0, 715 &irq_domain_simple_ops, NULL); 716 717 irq_end = irq_base + TWL4030_CORE_NR_IRQS; 718 719 /* 720 * Mask and clear all TWL4030 interrupts since initially we do 721 * not have any TWL4030 module interrupt handlers present 722 */ 723 status = twl4030_init_sih_modules(twl_irq_line); 724 if (status < 0) 725 return status; 726 727 twl4030_irq_base = irq_base; 728 729 /* 730 * install an irq handler for each of the SIH modules; 731 * clone dummy irq_chip since PIH can't *do* anything 732 */ 733 twl4030_irq_chip = dummy_irq_chip; 734 twl4030_irq_chip.name = "twl4030"; 735 736 twl4030_sih_irq_chip.irq_ack = dummy_irq_chip.irq_ack; 737 738 for (i = irq_base; i < irq_end; i++) { 739 irq_set_chip_and_handler(i, &twl4030_irq_chip, 740 handle_simple_irq); 741 irq_set_nested_thread(i, 1); 742 activate_irq(i); 743 } 744 745 pr_info("twl4030: %s (irq %d) chaining IRQs %d..%d\n", "PIH", 746 irq_num, irq_base, irq_end); 747 748 /* ... and the PWR_INT module ... */ 749 status = twl4030_sih_setup(dev, TWL4030_MODULE_INT, irq_end); 750 if (status < 0) { 751 pr_err("twl4030: sih_setup PWR INT --> %d\n", status); 752 goto fail; 753 } 754 755 /* install an irq handler to demultiplex the TWL4030 interrupt */ 756 status = request_threaded_irq(irq_num, NULL, handle_twl4030_pih, 757 IRQF_ONESHOT, 758 "TWL4030-PIH", NULL); 759 if (status < 0) { 760 pr_err("twl4030: could not claim irq%d: %d\n", irq_num, status); 761 goto fail_rqirq; 762 } 763 764 return irq_base; 765fail_rqirq: 766 /* clean up twl4030_sih_setup */ 767fail: 768 for (i = irq_base; i < irq_end; i++) { 769 irq_set_nested_thread(i, 0); 770 irq_set_chip_and_handler(i, NULL, NULL); 771 } 772 773 return status; 774} 775 776int twl4030_exit_irq(void) 777{ 778 /* FIXME undo twl_init_irq() */ 779 if (twl4030_irq_base) { 780 pr_err("twl4030: can't yet clean up IRQs?\n"); 781 return -ENOSYS; 782 } 783 return 0; 784} 785 786int twl4030_init_chip_irq(const char *chip) 787{ 788 if (!strcmp(chip, "twl5031")) { 789 sih_modules = sih_modules_twl5031; 790 nr_sih_modules = ARRAY_SIZE(sih_modules_twl5031); 791 } else { 792 sih_modules = sih_modules_twl4030; 793 nr_sih_modules = ARRAY_SIZE(sih_modules_twl4030); 794 } 795 796 return 0; 797} 798