wm8994-core.c revision 2fa33494676636f3455daddda33b7c3d5d932f2f
1/* 2 * wm8994-core.c -- Device access for Wolfson WM8994 3 * 4 * Copyright 2009 Wolfson Microelectronics PLC. 5 * 6 * Author: Mark Brown <broonie@opensource.wolfsonmicro.com> 7 * 8 * This program is free software; you can redistribute it and/or modify it 9 * under the terms of the GNU General Public License as published by the 10 * Free Software Foundation; either version 2 of the License, or (at your 11 * option) any later version. 12 * 13 */ 14 15#include <linux/kernel.h> 16#include <linux/module.h> 17#include <linux/slab.h> 18#include <linux/i2c.h> 19#include <linux/err.h> 20#include <linux/delay.h> 21#include <linux/mfd/core.h> 22#include <linux/pm_runtime.h> 23#include <linux/regmap.h> 24#include <linux/regulator/consumer.h> 25#include <linux/regulator/machine.h> 26 27#include <linux/mfd/wm8994/core.h> 28#include <linux/mfd/wm8994/pdata.h> 29#include <linux/mfd/wm8994/registers.h> 30 31static int wm8994_read(struct wm8994 *wm8994, unsigned short reg, 32 int bytes, void *dest) 33{ 34 return regmap_raw_read(wm8994->regmap, reg, dest, bytes); 35} 36 37/** 38 * wm8994_reg_read: Read a single WM8994 register. 39 * 40 * @wm8994: Device to read from. 41 * @reg: Register to read. 42 */ 43int wm8994_reg_read(struct wm8994 *wm8994, unsigned short reg) 44{ 45 unsigned int val; 46 int ret; 47 48 ret = regmap_read(wm8994->regmap, reg, &val); 49 50 if (ret < 0) 51 return ret; 52 else 53 return val; 54} 55EXPORT_SYMBOL_GPL(wm8994_reg_read); 56 57/** 58 * wm8994_bulk_read: Read multiple WM8994 registers 59 * 60 * @wm8994: Device to read from 61 * @reg: First register 62 * @count: Number of registers 63 * @buf: Buffer to fill. The data will be returned big endian. 64 */ 65int wm8994_bulk_read(struct wm8994 *wm8994, unsigned short reg, 66 int count, u16 *buf) 67{ 68 return regmap_bulk_read(wm8994->regmap, reg, buf, count); 69} 70 71static int wm8994_write(struct wm8994 *wm8994, unsigned short reg, 72 int bytes, const void *src) 73{ 74 return regmap_raw_write(wm8994->regmap, reg, src, bytes); 75} 76 77/** 78 * wm8994_reg_write: Write a single WM8994 register. 79 * 80 * @wm8994: Device to write to. 81 * @reg: Register to write to. 82 * @val: Value to write. 83 */ 84int wm8994_reg_write(struct wm8994 *wm8994, unsigned short reg, 85 unsigned short val) 86{ 87 return regmap_write(wm8994->regmap, reg, val); 88} 89EXPORT_SYMBOL_GPL(wm8994_reg_write); 90 91/** 92 * wm8994_bulk_write: Write multiple WM8994 registers 93 * 94 * @wm8994: Device to write to 95 * @reg: First register 96 * @count: Number of registers 97 * @buf: Buffer to write from. Data must be big-endian formatted. 98 */ 99int wm8994_bulk_write(struct wm8994 *wm8994, unsigned short reg, 100 int count, const u16 *buf) 101{ 102 return regmap_raw_write(wm8994->regmap, reg, buf, count * sizeof(u16)); 103} 104EXPORT_SYMBOL_GPL(wm8994_bulk_write); 105 106/** 107 * wm8994_set_bits: Set the value of a bitfield in a WM8994 register 108 * 109 * @wm8994: Device to write to. 110 * @reg: Register to write to. 111 * @mask: Mask of bits to set. 112 * @val: Value to set (unshifted) 113 */ 114int wm8994_set_bits(struct wm8994 *wm8994, unsigned short reg, 115 unsigned short mask, unsigned short val) 116{ 117 return regmap_update_bits(wm8994->regmap, reg, mask, val); 118} 119EXPORT_SYMBOL_GPL(wm8994_set_bits); 120 121static struct mfd_cell wm8994_regulator_devs[] = { 122 { 123 .name = "wm8994-ldo", 124 .id = 1, 125 .pm_runtime_no_callbacks = true, 126 }, 127 { 128 .name = "wm8994-ldo", 129 .id = 2, 130 .pm_runtime_no_callbacks = true, 131 }, 132}; 133 134static struct resource wm8994_codec_resources[] = { 135 { 136 .start = WM8994_IRQ_TEMP_SHUT, 137 .end = WM8994_IRQ_TEMP_WARN, 138 .flags = IORESOURCE_IRQ, 139 }, 140}; 141 142static struct resource wm8994_gpio_resources[] = { 143 { 144 .start = WM8994_IRQ_GPIO(1), 145 .end = WM8994_IRQ_GPIO(11), 146 .flags = IORESOURCE_IRQ, 147 }, 148}; 149 150static struct mfd_cell wm8994_devs[] = { 151 { 152 .name = "wm8994-codec", 153 .num_resources = ARRAY_SIZE(wm8994_codec_resources), 154 .resources = wm8994_codec_resources, 155 }, 156 157 { 158 .name = "wm8994-gpio", 159 .num_resources = ARRAY_SIZE(wm8994_gpio_resources), 160 .resources = wm8994_gpio_resources, 161 .pm_runtime_no_callbacks = true, 162 }, 163}; 164 165/* 166 * Supplies for the main bulk of CODEC; the LDO supplies are ignored 167 * and should be handled via the standard regulator API supply 168 * management. 169 */ 170static const char *wm1811_main_supplies[] = { 171 "DBVDD1", 172 "DBVDD2", 173 "DBVDD3", 174 "DCVDD", 175 "AVDD1", 176 "AVDD2", 177 "CPVDD", 178 "SPKVDD1", 179 "SPKVDD2", 180}; 181 182static const char *wm8994_main_supplies[] = { 183 "DBVDD", 184 "DCVDD", 185 "AVDD1", 186 "AVDD2", 187 "CPVDD", 188 "SPKVDD1", 189 "SPKVDD2", 190}; 191 192static const char *wm8958_main_supplies[] = { 193 "DBVDD1", 194 "DBVDD2", 195 "DBVDD3", 196 "DCVDD", 197 "AVDD1", 198 "AVDD2", 199 "CPVDD", 200 "SPKVDD1", 201 "SPKVDD2", 202}; 203 204#ifdef CONFIG_PM 205static int wm8994_suspend(struct device *dev) 206{ 207 struct wm8994 *wm8994 = dev_get_drvdata(dev); 208 int ret; 209 210 /* Don't actually go through with the suspend if the CODEC is 211 * still active (eg, for audio passthrough from CP. */ 212 ret = wm8994_reg_read(wm8994, WM8994_POWER_MANAGEMENT_1); 213 if (ret < 0) { 214 dev_err(dev, "Failed to read power status: %d\n", ret); 215 } else if (ret & WM8994_VMID_SEL_MASK) { 216 dev_dbg(dev, "CODEC still active, ignoring suspend\n"); 217 return 0; 218 } 219 220 ret = wm8994_reg_read(wm8994, WM8994_POWER_MANAGEMENT_4); 221 if (ret < 0) { 222 dev_err(dev, "Failed to read power status: %d\n", ret); 223 } else if (ret & (WM8994_AIF2ADCL_ENA | WM8994_AIF2ADCR_ENA | 224 WM8994_AIF1ADC2L_ENA | WM8994_AIF1ADC2R_ENA | 225 WM8994_AIF1ADC1L_ENA | WM8994_AIF1ADC1R_ENA)) { 226 dev_dbg(dev, "CODEC still active, ignoring suspend\n"); 227 return 0; 228 } 229 230 ret = wm8994_reg_read(wm8994, WM8994_POWER_MANAGEMENT_5); 231 if (ret < 0) { 232 dev_err(dev, "Failed to read power status: %d\n", ret); 233 } else if (ret & (WM8994_AIF2DACL_ENA | WM8994_AIF2DACR_ENA | 234 WM8994_AIF1DAC2L_ENA | WM8994_AIF1DAC2R_ENA | 235 WM8994_AIF1DAC1L_ENA | WM8994_AIF1DAC1R_ENA)) { 236 dev_dbg(dev, "CODEC still active, ignoring suspend\n"); 237 return 0; 238 } 239 240 switch (wm8994->type) { 241 case WM8958: 242 ret = wm8994_reg_read(wm8994, WM8958_MIC_DETECT_1); 243 if (ret < 0) { 244 dev_err(dev, "Failed to read power status: %d\n", ret); 245 } else if (ret & WM8958_MICD_ENA) { 246 dev_dbg(dev, "CODEC still active, ignoring suspend\n"); 247 return 0; 248 } 249 break; 250 default: 251 break; 252 } 253 254 /* Disable LDO pulldowns while the device is suspended if we 255 * don't know that something will be driving them. */ 256 if (!wm8994->ldo_ena_always_driven) 257 wm8994_set_bits(wm8994, WM8994_PULL_CONTROL_2, 258 WM8994_LDO1ENA_PD | WM8994_LDO2ENA_PD, 259 WM8994_LDO1ENA_PD | WM8994_LDO2ENA_PD); 260 261 /* GPIO configuration state is saved here since we may be configuring 262 * the GPIO alternate functions even if we're not using the gpiolib 263 * driver for them. 264 */ 265 ret = wm8994_read(wm8994, WM8994_GPIO_1, WM8994_NUM_GPIO_REGS * 2, 266 &wm8994->gpio_regs); 267 if (ret < 0) 268 dev_err(dev, "Failed to save GPIO registers: %d\n", ret); 269 270 /* For similar reasons we also stash the regulator states */ 271 ret = wm8994_read(wm8994, WM8994_LDO_1, WM8994_NUM_LDO_REGS * 2, 272 &wm8994->ldo_regs); 273 if (ret < 0) 274 dev_err(dev, "Failed to save LDO registers: %d\n", ret); 275 276 /* Explicitly put the device into reset in case regulators 277 * don't get disabled in order to ensure consistent restart. 278 */ 279 wm8994_reg_write(wm8994, WM8994_SOFTWARE_RESET, 0x8994); 280 281 wm8994->suspended = true; 282 283 ret = regulator_bulk_disable(wm8994->num_supplies, 284 wm8994->supplies); 285 if (ret != 0) { 286 dev_err(dev, "Failed to disable supplies: %d\n", ret); 287 return ret; 288 } 289 290 return 0; 291} 292 293static int wm8994_resume(struct device *dev) 294{ 295 struct wm8994 *wm8994 = dev_get_drvdata(dev); 296 int ret, i; 297 298 /* We may have lied to the PM core about suspending */ 299 if (!wm8994->suspended) 300 return 0; 301 302 ret = regulator_bulk_enable(wm8994->num_supplies, 303 wm8994->supplies); 304 if (ret != 0) { 305 dev_err(dev, "Failed to enable supplies: %d\n", ret); 306 return ret; 307 } 308 309 /* Write register at a time as we use the cache on the CPU so store 310 * it in native endian. 311 */ 312 for (i = 0; i < ARRAY_SIZE(wm8994->irq_masks_cur); i++) { 313 ret = wm8994_reg_write(wm8994, WM8994_INTERRUPT_STATUS_1_MASK 314 + i, wm8994->irq_masks_cur[i]); 315 if (ret < 0) 316 dev_err(dev, "Failed to restore interrupt masks: %d\n", 317 ret); 318 } 319 320 ret = wm8994_write(wm8994, WM8994_LDO_1, WM8994_NUM_LDO_REGS * 2, 321 &wm8994->ldo_regs); 322 if (ret < 0) 323 dev_err(dev, "Failed to restore LDO registers: %d\n", ret); 324 325 ret = wm8994_write(wm8994, WM8994_GPIO_1, WM8994_NUM_GPIO_REGS * 2, 326 &wm8994->gpio_regs); 327 if (ret < 0) 328 dev_err(dev, "Failed to restore GPIO registers: %d\n", ret); 329 330 /* Disable LDO pulldowns while the device is active */ 331 wm8994_set_bits(wm8994, WM8994_PULL_CONTROL_2, 332 WM8994_LDO1ENA_PD | WM8994_LDO2ENA_PD, 333 0); 334 335 wm8994->suspended = false; 336 337 return 0; 338} 339#endif 340 341#ifdef CONFIG_REGULATOR 342static int wm8994_ldo_in_use(struct wm8994_pdata *pdata, int ldo) 343{ 344 struct wm8994_ldo_pdata *ldo_pdata; 345 346 if (!pdata) 347 return 0; 348 349 ldo_pdata = &pdata->ldo[ldo]; 350 351 if (!ldo_pdata->init_data) 352 return 0; 353 354 return ldo_pdata->init_data->num_consumer_supplies != 0; 355} 356#else 357static int wm8994_ldo_in_use(struct wm8994_pdata *pdata, int ldo) 358{ 359 return 0; 360} 361#endif 362 363static struct regmap_config wm8994_regmap_config = { 364 .reg_bits = 16, 365 .val_bits = 16, 366}; 367 368/* 369 * Instantiate the generic non-control parts of the device. 370 */ 371static int wm8994_device_init(struct wm8994 *wm8994, int irq) 372{ 373 struct wm8994_pdata *pdata = wm8994->dev->platform_data; 374 const char *devname; 375 int ret, i; 376 377 dev_set_drvdata(wm8994->dev, wm8994); 378 379 /* Add the on-chip regulators first for bootstrapping */ 380 ret = mfd_add_devices(wm8994->dev, -1, 381 wm8994_regulator_devs, 382 ARRAY_SIZE(wm8994_regulator_devs), 383 NULL, 0); 384 if (ret != 0) { 385 dev_err(wm8994->dev, "Failed to add children: %d\n", ret); 386 goto err_regmap; 387 } 388 389 switch (wm8994->type) { 390 case WM1811: 391 wm8994->num_supplies = ARRAY_SIZE(wm1811_main_supplies); 392 break; 393 case WM8994: 394 wm8994->num_supplies = ARRAY_SIZE(wm8994_main_supplies); 395 break; 396 case WM8958: 397 wm8994->num_supplies = ARRAY_SIZE(wm8958_main_supplies); 398 break; 399 default: 400 BUG(); 401 goto err_regmap; 402 } 403 404 wm8994->supplies = devm_kzalloc(wm8994->dev, 405 sizeof(struct regulator_bulk_data) * 406 wm8994->num_supplies, GFP_KERNEL); 407 if (!wm8994->supplies) { 408 ret = -ENOMEM; 409 goto err_regmap; 410 } 411 412 switch (wm8994->type) { 413 case WM1811: 414 for (i = 0; i < ARRAY_SIZE(wm1811_main_supplies); i++) 415 wm8994->supplies[i].supply = wm1811_main_supplies[i]; 416 break; 417 case WM8994: 418 for (i = 0; i < ARRAY_SIZE(wm8994_main_supplies); i++) 419 wm8994->supplies[i].supply = wm8994_main_supplies[i]; 420 break; 421 case WM8958: 422 for (i = 0; i < ARRAY_SIZE(wm8958_main_supplies); i++) 423 wm8994->supplies[i].supply = wm8958_main_supplies[i]; 424 break; 425 default: 426 BUG(); 427 goto err_regmap; 428 } 429 430 ret = regulator_bulk_get(wm8994->dev, wm8994->num_supplies, 431 wm8994->supplies); 432 if (ret != 0) { 433 dev_err(wm8994->dev, "Failed to get supplies: %d\n", ret); 434 goto err_regmap; 435 } 436 437 ret = regulator_bulk_enable(wm8994->num_supplies, 438 wm8994->supplies); 439 if (ret != 0) { 440 dev_err(wm8994->dev, "Failed to enable supplies: %d\n", ret); 441 goto err_get; 442 } 443 444 ret = wm8994_reg_read(wm8994, WM8994_SOFTWARE_RESET); 445 if (ret < 0) { 446 dev_err(wm8994->dev, "Failed to read ID register\n"); 447 goto err_enable; 448 } 449 switch (ret) { 450 case 0x1811: 451 devname = "WM1811"; 452 if (wm8994->type != WM1811) 453 dev_warn(wm8994->dev, "Device registered as type %d\n", 454 wm8994->type); 455 wm8994->type = WM1811; 456 break; 457 case 0x8994: 458 devname = "WM8994"; 459 if (wm8994->type != WM8994) 460 dev_warn(wm8994->dev, "Device registered as type %d\n", 461 wm8994->type); 462 wm8994->type = WM8994; 463 break; 464 case 0x8958: 465 devname = "WM8958"; 466 if (wm8994->type != WM8958) 467 dev_warn(wm8994->dev, "Device registered as type %d\n", 468 wm8994->type); 469 wm8994->type = WM8958; 470 break; 471 default: 472 dev_err(wm8994->dev, "Device is not a WM8994, ID is %x\n", 473 ret); 474 ret = -EINVAL; 475 goto err_enable; 476 } 477 478 ret = wm8994_reg_read(wm8994, WM8994_CHIP_REVISION); 479 if (ret < 0) { 480 dev_err(wm8994->dev, "Failed to read revision register: %d\n", 481 ret); 482 goto err_enable; 483 } 484 485 switch (wm8994->type) { 486 case WM8994: 487 switch (ret) { 488 case 0: 489 case 1: 490 dev_warn(wm8994->dev, 491 "revision %c not fully supported\n", 492 'A' + ret); 493 break; 494 default: 495 break; 496 } 497 break; 498 default: 499 break; 500 } 501 502 dev_info(wm8994->dev, "%s revision %c\n", devname, 'A' + ret); 503 504 if (pdata) { 505 wm8994->irq_base = pdata->irq_base; 506 wm8994->gpio_base = pdata->gpio_base; 507 508 /* GPIO configuration is only applied if it's non-zero */ 509 for (i = 0; i < ARRAY_SIZE(pdata->gpio_defaults); i++) { 510 if (pdata->gpio_defaults[i]) { 511 wm8994_set_bits(wm8994, WM8994_GPIO_1 + i, 512 0xffff, 513 pdata->gpio_defaults[i]); 514 } 515 } 516 517 wm8994->ldo_ena_always_driven = pdata->ldo_ena_always_driven; 518 } 519 520 /* Disable LDO pulldowns while the device is active */ 521 wm8994_set_bits(wm8994, WM8994_PULL_CONTROL_2, 522 WM8994_LDO1ENA_PD | WM8994_LDO2ENA_PD, 523 0); 524 525 /* In some system designs where the regulators are not in use, 526 * we can achieve a small reduction in leakage currents by 527 * floating LDO outputs. This bit makes no difference if the 528 * LDOs are enabled, it only affects cases where the LDOs were 529 * in operation and are then disabled. 530 */ 531 for (i = 0; i < WM8994_NUM_LDO_REGS; i++) { 532 if (wm8994_ldo_in_use(pdata, i)) 533 wm8994_set_bits(wm8994, WM8994_LDO_1 + i, 534 WM8994_LDO1_DISCH, WM8994_LDO1_DISCH); 535 else 536 wm8994_set_bits(wm8994, WM8994_LDO_1 + i, 537 WM8994_LDO1_DISCH, 0); 538 } 539 540 wm8994_irq_init(wm8994); 541 542 ret = mfd_add_devices(wm8994->dev, -1, 543 wm8994_devs, ARRAY_SIZE(wm8994_devs), 544 NULL, 0); 545 if (ret != 0) { 546 dev_err(wm8994->dev, "Failed to add children: %d\n", ret); 547 goto err_irq; 548 } 549 550 pm_runtime_enable(wm8994->dev); 551 pm_runtime_resume(wm8994->dev); 552 553 return 0; 554 555err_irq: 556 wm8994_irq_exit(wm8994); 557err_enable: 558 regulator_bulk_disable(wm8994->num_supplies, 559 wm8994->supplies); 560err_get: 561 regulator_bulk_free(wm8994->num_supplies, wm8994->supplies); 562err_regmap: 563 regmap_exit(wm8994->regmap); 564 mfd_remove_devices(wm8994->dev); 565 return ret; 566} 567 568static void wm8994_device_exit(struct wm8994 *wm8994) 569{ 570 pm_runtime_disable(wm8994->dev); 571 mfd_remove_devices(wm8994->dev); 572 wm8994_irq_exit(wm8994); 573 regulator_bulk_disable(wm8994->num_supplies, 574 wm8994->supplies); 575 regulator_bulk_free(wm8994->num_supplies, wm8994->supplies); 576 regmap_exit(wm8994->regmap); 577} 578 579static const struct of_device_id wm8994_of_match[] = { 580 { .compatible = "wlf,wm1811", }, 581 { .compatible = "wlf,wm8994", }, 582 { .compatible = "wlf,wm8958", }, 583 { } 584}; 585MODULE_DEVICE_TABLE(of, wm8994_of_match); 586 587static int wm8994_i2c_probe(struct i2c_client *i2c, 588 const struct i2c_device_id *id) 589{ 590 struct wm8994 *wm8994; 591 int ret; 592 593 wm8994 = devm_kzalloc(&i2c->dev, sizeof(struct wm8994), GFP_KERNEL); 594 if (wm8994 == NULL) 595 return -ENOMEM; 596 597 i2c_set_clientdata(i2c, wm8994); 598 wm8994->dev = &i2c->dev; 599 wm8994->irq = i2c->irq; 600 wm8994->type = id->driver_data; 601 602 wm8994->regmap = regmap_init_i2c(i2c, &wm8994_regmap_config); 603 if (IS_ERR(wm8994->regmap)) { 604 ret = PTR_ERR(wm8994->regmap); 605 dev_err(wm8994->dev, "Failed to allocate register map: %d\n", 606 ret); 607 return ret; 608 } 609 610 return wm8994_device_init(wm8994, i2c->irq); 611} 612 613static int wm8994_i2c_remove(struct i2c_client *i2c) 614{ 615 struct wm8994 *wm8994 = i2c_get_clientdata(i2c); 616 617 wm8994_device_exit(wm8994); 618 619 return 0; 620} 621 622static const struct i2c_device_id wm8994_i2c_id[] = { 623 { "wm1811", WM1811 }, 624 { "wm8994", WM8994 }, 625 { "wm8958", WM8958 }, 626 { } 627}; 628MODULE_DEVICE_TABLE(i2c, wm8994_i2c_id); 629 630static UNIVERSAL_DEV_PM_OPS(wm8994_pm_ops, wm8994_suspend, wm8994_resume, 631 NULL); 632 633static struct i2c_driver wm8994_i2c_driver = { 634 .driver = { 635 .name = "wm8994", 636 .owner = THIS_MODULE, 637 .pm = &wm8994_pm_ops, 638 .of_match_table = wm8994_of_match, 639 }, 640 .probe = wm8994_i2c_probe, 641 .remove = wm8994_i2c_remove, 642 .id_table = wm8994_i2c_id, 643}; 644 645static int __init wm8994_i2c_init(void) 646{ 647 int ret; 648 649 ret = i2c_add_driver(&wm8994_i2c_driver); 650 if (ret != 0) 651 pr_err("Failed to register wm8994 I2C driver: %d\n", ret); 652 653 return ret; 654} 655module_init(wm8994_i2c_init); 656 657static void __exit wm8994_i2c_exit(void) 658{ 659 i2c_del_driver(&wm8994_i2c_driver); 660} 661module_exit(wm8994_i2c_exit); 662 663MODULE_DESCRIPTION("Core support for the WM8994 audio CODEC"); 664MODULE_LICENSE("GPL"); 665MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>"); 666