wm8994-core.c revision ceb57d27e28a8f979cbfd6391b7da6da51484059 
1/*
2 * wm8994-core.c  --  Device access for Wolfson WM8994
3 *
4 * Copyright 2009 Wolfson Microelectronics PLC.
5 *
6 * Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
7 *
8 *  This program is free software; you can redistribute  it and/or modify it
9 *  under  the terms of  the GNU General  Public License as published by the
10 *  Free Software Foundation;  either version 2 of the  License, or (at your
11 *  option) any later version.
12 *
13 */
14
15#include <linux/kernel.h>
16#include <linux/module.h>
17#include <linux/slab.h>
18#include <linux/i2c.h>
19#include <linux/err.h>
20#include <linux/delay.h>
21#include <linux/mfd/core.h>
22#include <linux/pm_runtime.h>
23#include <linux/regmap.h>
24#include <linux/regulator/consumer.h>
25#include <linux/regulator/machine.h>
26
27#include <linux/mfd/wm8994/core.h>
28#include <linux/mfd/wm8994/pdata.h>
29#include <linux/mfd/wm8994/registers.h>
30
31#include "wm8994.h"
32
33/**
34 * wm8994_reg_read: Read a single WM8994 register.
35 *
36 * @wm8994: Device to read from.
37 * @reg: Register to read.
38 */
39int wm8994_reg_read(struct wm8994 *wm8994, unsigned short reg)
40{
41	unsigned int val;
42	int ret;
43
44	ret = regmap_read(wm8994->regmap, reg, &val);
45
46	if (ret < 0)
47		return ret;
48	else
49		return val;
50}
51EXPORT_SYMBOL_GPL(wm8994_reg_read);
52
53/**
54 * wm8994_bulk_read: Read multiple WM8994 registers
55 *
56 * @wm8994: Device to read from
57 * @reg: First register
58 * @count: Number of registers
59 * @buf: Buffer to fill.  The data will be returned big endian.
60 */
61int wm8994_bulk_read(struct wm8994 *wm8994, unsigned short reg,
62		     int count, u16 *buf)
63{
64	return regmap_bulk_read(wm8994->regmap, reg, buf, count);
65}
66
67/**
68 * wm8994_reg_write: Write a single WM8994 register.
69 *
70 * @wm8994: Device to write to.
71 * @reg: Register to write to.
72 * @val: Value to write.
73 */
74int wm8994_reg_write(struct wm8994 *wm8994, unsigned short reg,
75		     unsigned short val)
76{
77	return regmap_write(wm8994->regmap, reg, val);
78}
79EXPORT_SYMBOL_GPL(wm8994_reg_write);
80
81/**
82 * wm8994_bulk_write: Write multiple WM8994 registers
83 *
84 * @wm8994: Device to write to
85 * @reg: First register
86 * @count: Number of registers
87 * @buf: Buffer to write from.  Data must be big-endian formatted.
88 */
89int wm8994_bulk_write(struct wm8994 *wm8994, unsigned short reg,
90		      int count, const u16 *buf)
91{
92	return regmap_raw_write(wm8994->regmap, reg, buf, count * sizeof(u16));
93}
94EXPORT_SYMBOL_GPL(wm8994_bulk_write);
95
96/**
97 * wm8994_set_bits: Set the value of a bitfield in a WM8994 register
98 *
99 * @wm8994: Device to write to.
100 * @reg: Register to write to.
101 * @mask: Mask of bits to set.
102 * @val: Value to set (unshifted)
103 */
104int wm8994_set_bits(struct wm8994 *wm8994, unsigned short reg,
105		    unsigned short mask, unsigned short val)
106{
107	return regmap_update_bits(wm8994->regmap, reg, mask, val);
108}
109EXPORT_SYMBOL_GPL(wm8994_set_bits);
110
111static struct mfd_cell wm8994_regulator_devs[] = {
112	{
113		.name = "wm8994-ldo",
114		.id = 1,
115		.pm_runtime_no_callbacks = true,
116	},
117	{
118		.name = "wm8994-ldo",
119		.id = 2,
120		.pm_runtime_no_callbacks = true,
121	},
122};
123
124static struct resource wm8994_codec_resources[] = {
125	{
126		.start = WM8994_IRQ_TEMP_SHUT,
127		.end   = WM8994_IRQ_TEMP_WARN,
128		.flags = IORESOURCE_IRQ,
129	},
130};
131
132static struct resource wm8994_gpio_resources[] = {
133	{
134		.start = WM8994_IRQ_GPIO(1),
135		.end   = WM8994_IRQ_GPIO(11),
136		.flags = IORESOURCE_IRQ,
137	},
138};
139
140static struct mfd_cell wm8994_devs[] = {
141	{
142		.name = "wm8994-codec",
143		.num_resources = ARRAY_SIZE(wm8994_codec_resources),
144		.resources = wm8994_codec_resources,
145	},
146
147	{
148		.name = "wm8994-gpio",
149		.num_resources = ARRAY_SIZE(wm8994_gpio_resources),
150		.resources = wm8994_gpio_resources,
151		.pm_runtime_no_callbacks = true,
152	},
153};
154
155/*
156 * Supplies for the main bulk of CODEC; the LDO supplies are ignored
157 * and should be handled via the standard regulator API supply
158 * management.
159 */
160static const char *wm1811_main_supplies[] = {
161	"DBVDD1",
162	"DBVDD2",
163	"DBVDD3",
164	"DCVDD",
165	"AVDD1",
166	"AVDD2",
167	"CPVDD",
168	"SPKVDD1",
169	"SPKVDD2",
170};
171
172static const char *wm8994_main_supplies[] = {
173	"DBVDD",
174	"DCVDD",
175	"AVDD1",
176	"AVDD2",
177	"CPVDD",
178	"SPKVDD1",
179	"SPKVDD2",
180};
181
182static const char *wm8958_main_supplies[] = {
183	"DBVDD1",
184	"DBVDD2",
185	"DBVDD3",
186	"DCVDD",
187	"AVDD1",
188	"AVDD2",
189	"CPVDD",
190	"SPKVDD1",
191	"SPKVDD2",
192};
193
194#ifdef CONFIG_PM
195static int wm8994_suspend(struct device *dev)
196{
197	struct wm8994 *wm8994 = dev_get_drvdata(dev);
198	int ret;
199
200	/* Don't actually go through with the suspend if the CODEC is
201	 * still active (eg, for audio passthrough from CP. */
202	ret = wm8994_reg_read(wm8994, WM8994_POWER_MANAGEMENT_1);
203	if (ret < 0) {
204		dev_err(dev, "Failed to read power status: %d\n", ret);
205	} else if (ret & WM8994_VMID_SEL_MASK) {
206		dev_dbg(dev, "CODEC still active, ignoring suspend\n");
207		return 0;
208	}
209
210	ret = wm8994_reg_read(wm8994, WM8994_POWER_MANAGEMENT_4);
211	if (ret < 0) {
212		dev_err(dev, "Failed to read power status: %d\n", ret);
213	} else if (ret & (WM8994_AIF2ADCL_ENA | WM8994_AIF2ADCR_ENA |
214			  WM8994_AIF1ADC2L_ENA | WM8994_AIF1ADC2R_ENA |
215			  WM8994_AIF1ADC1L_ENA | WM8994_AIF1ADC1R_ENA)) {
216		dev_dbg(dev, "CODEC still active, ignoring suspend\n");
217		return 0;
218	}
219
220	ret = wm8994_reg_read(wm8994, WM8994_POWER_MANAGEMENT_5);
221	if (ret < 0) {
222		dev_err(dev, "Failed to read power status: %d\n", ret);
223	} else if (ret & (WM8994_AIF2DACL_ENA | WM8994_AIF2DACR_ENA |
224			  WM8994_AIF1DAC2L_ENA | WM8994_AIF1DAC2R_ENA |
225			  WM8994_AIF1DAC1L_ENA | WM8994_AIF1DAC1R_ENA)) {
226		dev_dbg(dev, "CODEC still active, ignoring suspend\n");
227		return 0;
228	}
229
230	switch (wm8994->type) {
231	case WM8958:
232	case WM1811:
233		ret = wm8994_reg_read(wm8994, WM8958_MIC_DETECT_1);
234		if (ret < 0) {
235			dev_err(dev, "Failed to read power status: %d\n", ret);
236		} else if (ret & WM8958_MICD_ENA) {
237			dev_dbg(dev, "CODEC still active, ignoring suspend\n");
238			return 0;
239		}
240		break;
241	default:
242		break;
243	}
244
245	switch (wm8994->type) {
246	case WM1811:
247		ret = wm8994_reg_read(wm8994, WM8994_ANTIPOP_2);
248		if (ret < 0) {
249			dev_err(dev, "Failed to read jackdet: %d\n", ret);
250		} else if (ret & WM1811_JACKDET_MODE_MASK) {
251			dev_dbg(dev, "CODEC still active, ignoring suspend\n");
252			return 0;
253		}
254		break;
255	default:
256		break;
257	}
258
259	switch (wm8994->type) {
260	case WM1811:
261		ret = wm8994_reg_read(wm8994, WM8994_ANTIPOP_2);
262		if (ret < 0) {
263			dev_err(dev, "Failed to read jackdet: %d\n", ret);
264		} else if (ret & WM1811_JACKDET_MODE_MASK) {
265			dev_dbg(dev, "CODEC still active, ignoring suspend\n");
266			return 0;
267		}
268		break;
269	default:
270		break;
271	}
272
273	/* Disable LDO pulldowns while the device is suspended if we
274	 * don't know that something will be driving them. */
275	if (!wm8994->ldo_ena_always_driven)
276		wm8994_set_bits(wm8994, WM8994_PULL_CONTROL_2,
277				WM8994_LDO1ENA_PD | WM8994_LDO2ENA_PD,
278				WM8994_LDO1ENA_PD | WM8994_LDO2ENA_PD);
279
280	/* Explicitly put the device into reset in case regulators
281	 * don't get disabled in order to ensure consistent restart.
282	 */
283	wm8994_reg_write(wm8994, WM8994_SOFTWARE_RESET,
284			 wm8994_reg_read(wm8994, WM8994_SOFTWARE_RESET));
285
286	regcache_cache_only(wm8994->regmap, true);
287	regcache_mark_dirty(wm8994->regmap);
288
289	wm8994->suspended = true;
290
291	ret = regulator_bulk_disable(wm8994->num_supplies,
292				     wm8994->supplies);
293	if (ret != 0) {
294		dev_err(dev, "Failed to disable supplies: %d\n", ret);
295		return ret;
296	}
297
298	return 0;
299}
300
301static int wm8994_resume(struct device *dev)
302{
303	struct wm8994 *wm8994 = dev_get_drvdata(dev);
304	int ret;
305
306	/* We may have lied to the PM core about suspending */
307	if (!wm8994->suspended)
308		return 0;
309
310	ret = regulator_bulk_enable(wm8994->num_supplies,
311				    wm8994->supplies);
312	if (ret != 0) {
313		dev_err(dev, "Failed to enable supplies: %d\n", ret);
314		return ret;
315	}
316
317	regcache_cache_only(wm8994->regmap, false);
318	ret = regcache_sync(wm8994->regmap);
319	if (ret != 0) {
320		dev_err(dev, "Failed to restore register map: %d\n", ret);
321		goto err_enable;
322	}
323
324	/* Disable LDO pulldowns while the device is active */
325	wm8994_set_bits(wm8994, WM8994_PULL_CONTROL_2,
326			WM8994_LDO1ENA_PD | WM8994_LDO2ENA_PD,
327			0);
328
329	wm8994->suspended = false;
330
331	return 0;
332
333err_enable:
334	regulator_bulk_disable(wm8994->num_supplies, wm8994->supplies);
335
336	return ret;
337}
338#endif
339
340#ifdef CONFIG_REGULATOR
341static int wm8994_ldo_in_use(struct wm8994_pdata *pdata, int ldo)
342{
343	struct wm8994_ldo_pdata *ldo_pdata;
344
345	if (!pdata)
346		return 0;
347
348	ldo_pdata = &pdata->ldo[ldo];
349
350	if (!ldo_pdata->init_data)
351		return 0;
352
353	return ldo_pdata->init_data->num_consumer_supplies != 0;
354}
355#else
356static int wm8994_ldo_in_use(struct wm8994_pdata *pdata, int ldo)
357{
358	return 0;
359}
360#endif
361
362static const __devinitdata struct reg_default wm8994_revc_patch[] = {
363	{ 0x102, 0x3 },
364	{ 0x56, 0x3 },
365	{ 0x817, 0x0 },
366	{ 0x102, 0x0 },
367};
368
369static const __devinitdata struct reg_default wm8958_reva_patch[] = {
370	{ 0x102, 0x3 },
371	{ 0xcb, 0x81 },
372	{ 0x817, 0x0 },
373	{ 0x102, 0x0 },
374};
375
376static const __devinitdata struct reg_default wm1811_reva_patch[] = {
377	{ 0x102, 0x3 },
378	{ 0x56, 0x7 },
379	{ 0x5d, 0x7e },
380	{ 0x5e, 0x0 },
381	{ 0x102, 0x0 },
382};
383
384/*
385 * Instantiate the generic non-control parts of the device.
386 */
387static __devinit int wm8994_device_init(struct wm8994 *wm8994, int irq)
388{
389	struct wm8994_pdata *pdata = wm8994->dev->platform_data;
390	struct regmap_config *regmap_config;
391	const struct reg_default *regmap_patch = NULL;
392	const char *devname;
393	int ret, i, patch_regs;
394	int pulls = 0;
395
396	dev_set_drvdata(wm8994->dev, wm8994);
397
398	/* Add the on-chip regulators first for bootstrapping */
399	ret = mfd_add_devices(wm8994->dev, -1,
400			      wm8994_regulator_devs,
401			      ARRAY_SIZE(wm8994_regulator_devs),
402			      NULL, 0);
403	if (ret != 0) {
404		dev_err(wm8994->dev, "Failed to add children: %d\n", ret);
405		goto err;
406	}
407
408	switch (wm8994->type) {
409	case WM1811:
410		wm8994->num_supplies = ARRAY_SIZE(wm1811_main_supplies);
411		break;
412	case WM8994:
413		wm8994->num_supplies = ARRAY_SIZE(wm8994_main_supplies);
414		break;
415	case WM8958:
416		wm8994->num_supplies = ARRAY_SIZE(wm8958_main_supplies);
417		break;
418	default:
419		BUG();
420		goto err;
421	}
422
423	wm8994->supplies = devm_kzalloc(wm8994->dev,
424					sizeof(struct regulator_bulk_data) *
425					wm8994->num_supplies, GFP_KERNEL);
426	if (!wm8994->supplies) {
427		ret = -ENOMEM;
428		goto err;
429	}
430
431	switch (wm8994->type) {
432	case WM1811:
433		for (i = 0; i < ARRAY_SIZE(wm1811_main_supplies); i++)
434			wm8994->supplies[i].supply = wm1811_main_supplies[i];
435		break;
436	case WM8994:
437		for (i = 0; i < ARRAY_SIZE(wm8994_main_supplies); i++)
438			wm8994->supplies[i].supply = wm8994_main_supplies[i];
439		break;
440	case WM8958:
441		for (i = 0; i < ARRAY_SIZE(wm8958_main_supplies); i++)
442			wm8994->supplies[i].supply = wm8958_main_supplies[i];
443		break;
444	default:
445		BUG();
446		goto err;
447	}
448
449	ret = regulator_bulk_get(wm8994->dev, wm8994->num_supplies,
450				 wm8994->supplies);
451	if (ret != 0) {
452		dev_err(wm8994->dev, "Failed to get supplies: %d\n", ret);
453		goto err;
454	}
455
456	ret = regulator_bulk_enable(wm8994->num_supplies,
457				    wm8994->supplies);
458	if (ret != 0) {
459		dev_err(wm8994->dev, "Failed to enable supplies: %d\n", ret);
460		goto err_get;
461	}
462
463	ret = wm8994_reg_read(wm8994, WM8994_SOFTWARE_RESET);
464	if (ret < 0) {
465		dev_err(wm8994->dev, "Failed to read ID register\n");
466		goto err_enable;
467	}
468	switch (ret) {
469	case 0x1811:
470		devname = "WM1811";
471		if (wm8994->type != WM1811)
472			dev_warn(wm8994->dev, "Device registered as type %d\n",
473				 wm8994->type);
474		wm8994->type = WM1811;
475		break;
476	case 0x8994:
477		devname = "WM8994";
478		if (wm8994->type != WM8994)
479			dev_warn(wm8994->dev, "Device registered as type %d\n",
480				 wm8994->type);
481		wm8994->type = WM8994;
482		break;
483	case 0x8958:
484		devname = "WM8958";
485		if (wm8994->type != WM8958)
486			dev_warn(wm8994->dev, "Device registered as type %d\n",
487				 wm8994->type);
488		wm8994->type = WM8958;
489		break;
490	default:
491		dev_err(wm8994->dev, "Device is not a WM8994, ID is %x\n",
492			ret);
493		ret = -EINVAL;
494		goto err_enable;
495	}
496
497	ret = wm8994_reg_read(wm8994, WM8994_CHIP_REVISION);
498	if (ret < 0) {
499		dev_err(wm8994->dev, "Failed to read revision register: %d\n",
500			ret);
501		goto err_enable;
502	}
503	wm8994->revision = ret & WM8994_CHIP_REV_MASK;
504	wm8994->cust_id = (ret & WM8994_CUST_ID_MASK) >> WM8994_CUST_ID_SHIFT;
505
506	switch (wm8994->type) {
507	case WM8994:
508		switch (wm8994->revision) {
509		case 0:
510		case 1:
511			dev_warn(wm8994->dev,
512				 "revision %c not fully supported\n",
513				 'A' + wm8994->revision);
514			break;
515		case 2:
516		case 3:
517			regmap_patch = wm8994_revc_patch;
518			patch_regs = ARRAY_SIZE(wm8994_revc_patch);
519			break;
520		default:
521			break;
522		}
523		break;
524
525	case WM8958:
526		switch (wm8994->revision) {
527		case 0:
528			regmap_patch = wm8958_reva_patch;
529			patch_regs = ARRAY_SIZE(wm8958_reva_patch);
530			break;
531		default:
532			break;
533		}
534		break;
535
536	case WM1811:
537		/* Revision C did not change the relevant layer */
538		if (wm8994->revision > 1)
539			wm8994->revision++;
540		switch (wm8994->revision) {
541		case 0:
542		case 1:
543		case 2:
544		case 3:
545			regmap_patch = wm1811_reva_patch;
546			patch_regs = ARRAY_SIZE(wm1811_reva_patch);
547			break;
548		default:
549			break;
550		}
551		break;
552
553	default:
554		break;
555	}
556
557	dev_info(wm8994->dev, "%s revision %c CUST_ID %02x\n", devname,
558		 'A' + wm8994->revision, wm8994->cust_id);
559
560	switch (wm8994->type) {
561	case WM1811:
562		regmap_config = &wm1811_regmap_config;
563		break;
564	case WM8994:
565		regmap_config = &wm8994_regmap_config;
566		break;
567	case WM8958:
568		regmap_config = &wm8958_regmap_config;
569		break;
570	default:
571		dev_err(wm8994->dev, "Unknown device type %d\n", wm8994->type);
572		return -EINVAL;
573	}
574
575	ret = regmap_reinit_cache(wm8994->regmap, regmap_config);
576	if (ret != 0) {
577		dev_err(wm8994->dev, "Failed to reinit register cache: %d\n",
578			ret);
579		return ret;
580	}
581
582	if (regmap_patch) {
583		ret = regmap_register_patch(wm8994->regmap, regmap_patch,
584					    patch_regs);
585		if (ret != 0) {
586			dev_err(wm8994->dev, "Failed to register patch: %d\n",
587				ret);
588			goto err;
589		}
590	}
591
592	if (pdata) {
593		wm8994->irq_base = pdata->irq_base;
594		wm8994->gpio_base = pdata->gpio_base;
595
596		/* GPIO configuration is only applied if it's non-zero */
597		for (i = 0; i < ARRAY_SIZE(pdata->gpio_defaults); i++) {
598			if (pdata->gpio_defaults[i]) {
599				wm8994_set_bits(wm8994, WM8994_GPIO_1 + i,
600						0xffff,
601						pdata->gpio_defaults[i]);
602			}
603		}
604
605		wm8994->ldo_ena_always_driven = pdata->ldo_ena_always_driven;
606
607		if (pdata->spkmode_pu)
608			pulls |= WM8994_SPKMODE_PU;
609	}
610
611	/* Disable unneeded pulls */
612	wm8994_set_bits(wm8994, WM8994_PULL_CONTROL_2,
613			WM8994_LDO1ENA_PD | WM8994_LDO2ENA_PD |
614			WM8994_SPKMODE_PU | WM8994_CSNADDR_PD,
615			pulls);
616
617	/* In some system designs where the regulators are not in use,
618	 * we can achieve a small reduction in leakage currents by
619	 * floating LDO outputs.  This bit makes no difference if the
620	 * LDOs are enabled, it only affects cases where the LDOs were
621	 * in operation and are then disabled.
622	 */
623	for (i = 0; i < WM8994_NUM_LDO_REGS; i++) {
624		if (wm8994_ldo_in_use(pdata, i))
625			wm8994_set_bits(wm8994, WM8994_LDO_1 + i,
626					WM8994_LDO1_DISCH, WM8994_LDO1_DISCH);
627		else
628			wm8994_set_bits(wm8994, WM8994_LDO_1 + i,
629					WM8994_LDO1_DISCH, 0);
630	}
631
632	wm8994_irq_init(wm8994);
633
634	ret = mfd_add_devices(wm8994->dev, -1,
635			      wm8994_devs, ARRAY_SIZE(wm8994_devs),
636			      NULL, 0);
637	if (ret != 0) {
638		dev_err(wm8994->dev, "Failed to add children: %d\n", ret);
639		goto err_irq;
640	}
641
642	pm_runtime_enable(wm8994->dev);
643	pm_runtime_idle(wm8994->dev);
644
645	return 0;
646
647err_irq:
648	wm8994_irq_exit(wm8994);
649err_enable:
650	regulator_bulk_disable(wm8994->num_supplies,
651			       wm8994->supplies);
652err_get:
653	regulator_bulk_free(wm8994->num_supplies, wm8994->supplies);
654err:
655	mfd_remove_devices(wm8994->dev);
656	return ret;
657}
658
659static __devexit void wm8994_device_exit(struct wm8994 *wm8994)
660{
661	pm_runtime_disable(wm8994->dev);
662	mfd_remove_devices(wm8994->dev);
663	wm8994_irq_exit(wm8994);
664	regulator_bulk_disable(wm8994->num_supplies,
665			       wm8994->supplies);
666	regulator_bulk_free(wm8994->num_supplies, wm8994->supplies);
667}
668
669static const struct of_device_id wm8994_of_match[] = {
670	{ .compatible = "wlf,wm1811", },
671	{ .compatible = "wlf,wm8994", },
672	{ .compatible = "wlf,wm8958", },
673	{ }
674};
675MODULE_DEVICE_TABLE(of, wm8994_of_match);
676
677static __devinit int wm8994_i2c_probe(struct i2c_client *i2c,
678				      const struct i2c_device_id *id)
679{
680	struct wm8994 *wm8994;
681	int ret;
682
683	wm8994 = devm_kzalloc(&i2c->dev, sizeof(struct wm8994), GFP_KERNEL);
684	if (wm8994 == NULL)
685		return -ENOMEM;
686
687	i2c_set_clientdata(i2c, wm8994);
688	wm8994->dev = &i2c->dev;
689	wm8994->irq = i2c->irq;
690	wm8994->type = id->driver_data;
691
692	wm8994->regmap = devm_regmap_init_i2c(i2c, &wm8994_base_regmap_config);
693	if (IS_ERR(wm8994->regmap)) {
694		ret = PTR_ERR(wm8994->regmap);
695		dev_err(wm8994->dev, "Failed to allocate register map: %d\n",
696			ret);
697		return ret;
698	}
699
700	return wm8994_device_init(wm8994, i2c->irq);
701}
702
703static __devexit int wm8994_i2c_remove(struct i2c_client *i2c)
704{
705	struct wm8994 *wm8994 = i2c_get_clientdata(i2c);
706
707	wm8994_device_exit(wm8994);
708
709	return 0;
710}
711
712static const struct i2c_device_id wm8994_i2c_id[] = {
713	{ "wm1811", WM1811 },
714	{ "wm1811a", WM1811 },
715	{ "wm8994", WM8994 },
716	{ "wm8958", WM8958 },
717	{ }
718};
719MODULE_DEVICE_TABLE(i2c, wm8994_i2c_id);
720
721static UNIVERSAL_DEV_PM_OPS(wm8994_pm_ops, wm8994_suspend, wm8994_resume,
722			    NULL);
723
724static struct i2c_driver wm8994_i2c_driver = {
725	.driver = {
726		.name = "wm8994",
727		.owner = THIS_MODULE,
728		.pm = &wm8994_pm_ops,
729		.of_match_table = wm8994_of_match,
730	},
731	.probe = wm8994_i2c_probe,
732	.remove = __devexit_p(wm8994_i2c_remove),
733	.id_table = wm8994_i2c_id,
734};
735
736module_i2c_driver(wm8994_i2c_driver);
737
738MODULE_DESCRIPTION("Core support for the WM8994 audio CODEC");
739MODULE_LICENSE("GPL");
740MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>");
741