wm8994-core.c revision ee67b0cd5ed69953a6306efabd6e9e23bff09178
1/* 2 * wm8994-core.c -- Device access for Wolfson WM8994 3 * 4 * Copyright 2009 Wolfson Microelectronics PLC. 5 * 6 * Author: Mark Brown <broonie@opensource.wolfsonmicro.com> 7 * 8 * This program is free software; you can redistribute it and/or modify it 9 * under the terms of the GNU General Public License as published by the 10 * Free Software Foundation; either version 2 of the License, or (at your 11 * option) any later version. 12 * 13 */ 14 15#include <linux/kernel.h> 16#include <linux/module.h> 17#include <linux/slab.h> 18#include <linux/i2c.h> 19#include <linux/err.h> 20#include <linux/delay.h> 21#include <linux/mfd/core.h> 22#include <linux/pm_runtime.h> 23#include <linux/regmap.h> 24#include <linux/regulator/consumer.h> 25#include <linux/regulator/machine.h> 26 27#include <linux/mfd/wm8994/core.h> 28#include <linux/mfd/wm8994/pdata.h> 29#include <linux/mfd/wm8994/registers.h> 30 31#include "wm8994.h" 32 33/** 34 * wm8994_reg_read: Read a single WM8994 register. 35 * 36 * @wm8994: Device to read from. 37 * @reg: Register to read. 38 */ 39int wm8994_reg_read(struct wm8994 *wm8994, unsigned short reg) 40{ 41 unsigned int val; 42 int ret; 43 44 ret = regmap_read(wm8994->regmap, reg, &val); 45 46 if (ret < 0) 47 return ret; 48 else 49 return val; 50} 51EXPORT_SYMBOL_GPL(wm8994_reg_read); 52 53/** 54 * wm8994_bulk_read: Read multiple WM8994 registers 55 * 56 * @wm8994: Device to read from 57 * @reg: First register 58 * @count: Number of registers 59 * @buf: Buffer to fill. The data will be returned big endian. 60 */ 61int wm8994_bulk_read(struct wm8994 *wm8994, unsigned short reg, 62 int count, u16 *buf) 63{ 64 return regmap_bulk_read(wm8994->regmap, reg, buf, count); 65} 66 67/** 68 * wm8994_reg_write: Write a single WM8994 register. 69 * 70 * @wm8994: Device to write to. 71 * @reg: Register to write to. 72 * @val: Value to write. 73 */ 74int wm8994_reg_write(struct wm8994 *wm8994, unsigned short reg, 75 unsigned short val) 76{ 77 return regmap_write(wm8994->regmap, reg, val); 78} 79EXPORT_SYMBOL_GPL(wm8994_reg_write); 80 81/** 82 * wm8994_bulk_write: Write multiple WM8994 registers 83 * 84 * @wm8994: Device to write to 85 * @reg: First register 86 * @count: Number of registers 87 * @buf: Buffer to write from. Data must be big-endian formatted. 88 */ 89int wm8994_bulk_write(struct wm8994 *wm8994, unsigned short reg, 90 int count, const u16 *buf) 91{ 92 return regmap_raw_write(wm8994->regmap, reg, buf, count * sizeof(u16)); 93} 94EXPORT_SYMBOL_GPL(wm8994_bulk_write); 95 96/** 97 * wm8994_set_bits: Set the value of a bitfield in a WM8994 register 98 * 99 * @wm8994: Device to write to. 100 * @reg: Register to write to. 101 * @mask: Mask of bits to set. 102 * @val: Value to set (unshifted) 103 */ 104int wm8994_set_bits(struct wm8994 *wm8994, unsigned short reg, 105 unsigned short mask, unsigned short val) 106{ 107 return regmap_update_bits(wm8994->regmap, reg, mask, val); 108} 109EXPORT_SYMBOL_GPL(wm8994_set_bits); 110 111static struct mfd_cell wm8994_regulator_devs[] = { 112 { 113 .name = "wm8994-ldo", 114 .id = 1, 115 .pm_runtime_no_callbacks = true, 116 }, 117 { 118 .name = "wm8994-ldo", 119 .id = 2, 120 .pm_runtime_no_callbacks = true, 121 }, 122}; 123 124static struct resource wm8994_codec_resources[] = { 125 { 126 .start = WM8994_IRQ_TEMP_SHUT, 127 .end = WM8994_IRQ_TEMP_WARN, 128 .flags = IORESOURCE_IRQ, 129 }, 130}; 131 132static struct resource wm8994_gpio_resources[] = { 133 { 134 .start = WM8994_IRQ_GPIO(1), 135 .end = WM8994_IRQ_GPIO(11), 136 .flags = IORESOURCE_IRQ, 137 }, 138}; 139 140static struct mfd_cell wm8994_devs[] = { 141 { 142 .name = "wm8994-codec", 143 .num_resources = ARRAY_SIZE(wm8994_codec_resources), 144 .resources = wm8994_codec_resources, 145 }, 146 147 { 148 .name = "wm8994-gpio", 149 .num_resources = ARRAY_SIZE(wm8994_gpio_resources), 150 .resources = wm8994_gpio_resources, 151 .pm_runtime_no_callbacks = true, 152 }, 153}; 154 155/* 156 * Supplies for the main bulk of CODEC; the LDO supplies are ignored 157 * and should be handled via the standard regulator API supply 158 * management. 159 */ 160static const char *wm1811_main_supplies[] = { 161 "DBVDD1", 162 "DBVDD2", 163 "DBVDD3", 164 "DCVDD", 165 "AVDD1", 166 "AVDD2", 167 "CPVDD", 168 "SPKVDD1", 169 "SPKVDD2", 170}; 171 172static const char *wm8994_main_supplies[] = { 173 "DBVDD", 174 "DCVDD", 175 "AVDD1", 176 "AVDD2", 177 "CPVDD", 178 "SPKVDD1", 179 "SPKVDD2", 180}; 181 182static const char *wm8958_main_supplies[] = { 183 "DBVDD1", 184 "DBVDD2", 185 "DBVDD3", 186 "DCVDD", 187 "AVDD1", 188 "AVDD2", 189 "CPVDD", 190 "SPKVDD1", 191 "SPKVDD2", 192}; 193 194#ifdef CONFIG_PM 195static int wm8994_suspend(struct device *dev) 196{ 197 struct wm8994 *wm8994 = dev_get_drvdata(dev); 198 int ret; 199 200 /* Don't actually go through with the suspend if the CODEC is 201 * still active (eg, for audio passthrough from CP. */ 202 ret = wm8994_reg_read(wm8994, WM8994_POWER_MANAGEMENT_1); 203 if (ret < 0) { 204 dev_err(dev, "Failed to read power status: %d\n", ret); 205 } else if (ret & WM8994_VMID_SEL_MASK) { 206 dev_dbg(dev, "CODEC still active, ignoring suspend\n"); 207 return 0; 208 } 209 210 ret = wm8994_reg_read(wm8994, WM8994_POWER_MANAGEMENT_4); 211 if (ret < 0) { 212 dev_err(dev, "Failed to read power status: %d\n", ret); 213 } else if (ret & (WM8994_AIF2ADCL_ENA | WM8994_AIF2ADCR_ENA | 214 WM8994_AIF1ADC2L_ENA | WM8994_AIF1ADC2R_ENA | 215 WM8994_AIF1ADC1L_ENA | WM8994_AIF1ADC1R_ENA)) { 216 dev_dbg(dev, "CODEC still active, ignoring suspend\n"); 217 return 0; 218 } 219 220 ret = wm8994_reg_read(wm8994, WM8994_POWER_MANAGEMENT_5); 221 if (ret < 0) { 222 dev_err(dev, "Failed to read power status: %d\n", ret); 223 } else if (ret & (WM8994_AIF2DACL_ENA | WM8994_AIF2DACR_ENA | 224 WM8994_AIF1DAC2L_ENA | WM8994_AIF1DAC2R_ENA | 225 WM8994_AIF1DAC1L_ENA | WM8994_AIF1DAC1R_ENA)) { 226 dev_dbg(dev, "CODEC still active, ignoring suspend\n"); 227 return 0; 228 } 229 230 switch (wm8994->type) { 231 case WM8958: 232 case WM1811: 233 ret = wm8994_reg_read(wm8994, WM8958_MIC_DETECT_1); 234 if (ret < 0) { 235 dev_err(dev, "Failed to read power status: %d\n", ret); 236 } else if (ret & WM8958_MICD_ENA) { 237 dev_dbg(dev, "CODEC still active, ignoring suspend\n"); 238 return 0; 239 } 240 break; 241 default: 242 break; 243 } 244 245 switch (wm8994->type) { 246 case WM1811: 247 ret = wm8994_reg_read(wm8994, WM8994_ANTIPOP_2); 248 if (ret < 0) { 249 dev_err(dev, "Failed to read jackdet: %d\n", ret); 250 } else if (ret & WM1811_JACKDET_MODE_MASK) { 251 dev_dbg(dev, "CODEC still active, ignoring suspend\n"); 252 return 0; 253 } 254 break; 255 default: 256 break; 257 } 258 259 /* Disable LDO pulldowns while the device is suspended if we 260 * don't know that something will be driving them. */ 261 if (!wm8994->ldo_ena_always_driven) 262 wm8994_set_bits(wm8994, WM8994_PULL_CONTROL_2, 263 WM8994_LDO1ENA_PD | WM8994_LDO2ENA_PD, 264 WM8994_LDO1ENA_PD | WM8994_LDO2ENA_PD); 265 266 /* Explicitly put the device into reset in case regulators 267 * don't get disabled in order to ensure consistent restart. 268 */ 269 wm8994_reg_write(wm8994, WM8994_SOFTWARE_RESET, 270 wm8994_reg_read(wm8994, WM8994_SOFTWARE_RESET)); 271 272 regcache_cache_only(wm8994->regmap, true); 273 regcache_mark_dirty(wm8994->regmap); 274 275 wm8994->suspended = true; 276 277 ret = regulator_bulk_disable(wm8994->num_supplies, 278 wm8994->supplies); 279 if (ret != 0) { 280 dev_err(dev, "Failed to disable supplies: %d\n", ret); 281 return ret; 282 } 283 284 return 0; 285} 286 287static int wm8994_resume(struct device *dev) 288{ 289 struct wm8994 *wm8994 = dev_get_drvdata(dev); 290 int ret; 291 292 /* We may have lied to the PM core about suspending */ 293 if (!wm8994->suspended) 294 return 0; 295 296 ret = regulator_bulk_enable(wm8994->num_supplies, 297 wm8994->supplies); 298 if (ret != 0) { 299 dev_err(dev, "Failed to enable supplies: %d\n", ret); 300 return ret; 301 } 302 303 regcache_cache_only(wm8994->regmap, false); 304 ret = regcache_sync(wm8994->regmap); 305 if (ret != 0) { 306 dev_err(dev, "Failed to restore register map: %d\n", ret); 307 goto err_enable; 308 } 309 310 /* Disable LDO pulldowns while the device is active */ 311 wm8994_set_bits(wm8994, WM8994_PULL_CONTROL_2, 312 WM8994_LDO1ENA_PD | WM8994_LDO2ENA_PD, 313 0); 314 315 wm8994->suspended = false; 316 317 return 0; 318 319err_enable: 320 regulator_bulk_disable(wm8994->num_supplies, wm8994->supplies); 321 322 return ret; 323} 324#endif 325 326#ifdef CONFIG_REGULATOR 327static int wm8994_ldo_in_use(struct wm8994_pdata *pdata, int ldo) 328{ 329 struct wm8994_ldo_pdata *ldo_pdata; 330 331 if (!pdata) 332 return 0; 333 334 ldo_pdata = &pdata->ldo[ldo]; 335 336 if (!ldo_pdata->init_data) 337 return 0; 338 339 return ldo_pdata->init_data->num_consumer_supplies != 0; 340} 341#else 342static int wm8994_ldo_in_use(struct wm8994_pdata *pdata, int ldo) 343{ 344 return 0; 345} 346#endif 347 348/* 349 * Instantiate the generic non-control parts of the device. 350 */ 351static int wm8994_device_init(struct wm8994 *wm8994, int irq) 352{ 353 struct wm8994_pdata *pdata = wm8994->dev->platform_data; 354 struct regmap_config *regmap_config; 355 const char *devname; 356 int ret, i; 357 int pulls = 0; 358 359 dev_set_drvdata(wm8994->dev, wm8994); 360 361 /* Add the on-chip regulators first for bootstrapping */ 362 ret = mfd_add_devices(wm8994->dev, -1, 363 wm8994_regulator_devs, 364 ARRAY_SIZE(wm8994_regulator_devs), 365 NULL, 0); 366 if (ret != 0) { 367 dev_err(wm8994->dev, "Failed to add children: %d\n", ret); 368 goto err_regmap; 369 } 370 371 switch (wm8994->type) { 372 case WM1811: 373 wm8994->num_supplies = ARRAY_SIZE(wm1811_main_supplies); 374 break; 375 case WM8994: 376 wm8994->num_supplies = ARRAY_SIZE(wm8994_main_supplies); 377 break; 378 case WM8958: 379 wm8994->num_supplies = ARRAY_SIZE(wm8958_main_supplies); 380 break; 381 default: 382 BUG(); 383 goto err_regmap; 384 } 385 386 wm8994->supplies = devm_kzalloc(wm8994->dev, 387 sizeof(struct regulator_bulk_data) * 388 wm8994->num_supplies, GFP_KERNEL); 389 if (!wm8994->supplies) { 390 ret = -ENOMEM; 391 goto err_regmap; 392 } 393 394 switch (wm8994->type) { 395 case WM1811: 396 for (i = 0; i < ARRAY_SIZE(wm1811_main_supplies); i++) 397 wm8994->supplies[i].supply = wm1811_main_supplies[i]; 398 break; 399 case WM8994: 400 for (i = 0; i < ARRAY_SIZE(wm8994_main_supplies); i++) 401 wm8994->supplies[i].supply = wm8994_main_supplies[i]; 402 break; 403 case WM8958: 404 for (i = 0; i < ARRAY_SIZE(wm8958_main_supplies); i++) 405 wm8994->supplies[i].supply = wm8958_main_supplies[i]; 406 break; 407 default: 408 BUG(); 409 goto err_regmap; 410 } 411 412 ret = regulator_bulk_get(wm8994->dev, wm8994->num_supplies, 413 wm8994->supplies); 414 if (ret != 0) { 415 dev_err(wm8994->dev, "Failed to get supplies: %d\n", ret); 416 goto err_regmap; 417 } 418 419 ret = regulator_bulk_enable(wm8994->num_supplies, 420 wm8994->supplies); 421 if (ret != 0) { 422 dev_err(wm8994->dev, "Failed to enable supplies: %d\n", ret); 423 goto err_get; 424 } 425 426 ret = wm8994_reg_read(wm8994, WM8994_SOFTWARE_RESET); 427 if (ret < 0) { 428 dev_err(wm8994->dev, "Failed to read ID register\n"); 429 goto err_enable; 430 } 431 switch (ret) { 432 case 0x1811: 433 devname = "WM1811"; 434 if (wm8994->type != WM1811) 435 dev_warn(wm8994->dev, "Device registered as type %d\n", 436 wm8994->type); 437 wm8994->type = WM1811; 438 break; 439 case 0x8994: 440 devname = "WM8994"; 441 if (wm8994->type != WM8994) 442 dev_warn(wm8994->dev, "Device registered as type %d\n", 443 wm8994->type); 444 wm8994->type = WM8994; 445 break; 446 case 0x8958: 447 devname = "WM8958"; 448 if (wm8994->type != WM8958) 449 dev_warn(wm8994->dev, "Device registered as type %d\n", 450 wm8994->type); 451 wm8994->type = WM8958; 452 break; 453 default: 454 dev_err(wm8994->dev, "Device is not a WM8994, ID is %x\n", 455 ret); 456 ret = -EINVAL; 457 goto err_enable; 458 } 459 460 ret = wm8994_reg_read(wm8994, WM8994_CHIP_REVISION); 461 if (ret < 0) { 462 dev_err(wm8994->dev, "Failed to read revision register: %d\n", 463 ret); 464 goto err_enable; 465 } 466 wm8994->revision = ret; 467 468 switch (wm8994->type) { 469 case WM8994: 470 switch (wm8994->revision) { 471 case 0: 472 case 1: 473 dev_warn(wm8994->dev, 474 "revision %c not fully supported\n", 475 'A' + wm8994->revision); 476 break; 477 default: 478 break; 479 } 480 break; 481 case WM1811: 482 /* Revision C did not change the relevant layer */ 483 if (wm8994->revision > 1) 484 wm8994->revision++; 485 break; 486 default: 487 break; 488 } 489 490 dev_info(wm8994->dev, "%s revision %c\n", devname, 491 'A' + wm8994->revision); 492 493 switch (wm8994->type) { 494 case WM1811: 495 regmap_config = &wm1811_regmap_config; 496 break; 497 case WM8994: 498 regmap_config = &wm8994_regmap_config; 499 break; 500 case WM8958: 501 regmap_config = &wm8958_regmap_config; 502 break; 503 default: 504 dev_err(wm8994->dev, "Unknown device type %d\n", wm8994->type); 505 return -EINVAL; 506 } 507 508 ret = regmap_reinit_cache(wm8994->regmap, regmap_config); 509 if (ret != 0) { 510 dev_err(wm8994->dev, "Failed to reinit register cache: %d\n", 511 ret); 512 return ret; 513 } 514 515 if (pdata) { 516 wm8994->irq_base = pdata->irq_base; 517 wm8994->gpio_base = pdata->gpio_base; 518 519 /* GPIO configuration is only applied if it's non-zero */ 520 for (i = 0; i < ARRAY_SIZE(pdata->gpio_defaults); i++) { 521 if (pdata->gpio_defaults[i]) { 522 wm8994_set_bits(wm8994, WM8994_GPIO_1 + i, 523 0xffff, 524 pdata->gpio_defaults[i]); 525 } 526 } 527 528 wm8994->ldo_ena_always_driven = pdata->ldo_ena_always_driven; 529 530 if (pdata->spkmode_pu) 531 pulls |= WM8994_SPKMODE_PU; 532 } 533 534 /* Disable unneeded pulls */ 535 wm8994_set_bits(wm8994, WM8994_PULL_CONTROL_2, 536 WM8994_LDO1ENA_PD | WM8994_LDO2ENA_PD | 537 WM8994_SPKMODE_PU | WM8994_CSNADDR_PD, 538 pulls); 539 540 /* In some system designs where the regulators are not in use, 541 * we can achieve a small reduction in leakage currents by 542 * floating LDO outputs. This bit makes no difference if the 543 * LDOs are enabled, it only affects cases where the LDOs were 544 * in operation and are then disabled. 545 */ 546 for (i = 0; i < WM8994_NUM_LDO_REGS; i++) { 547 if (wm8994_ldo_in_use(pdata, i)) 548 wm8994_set_bits(wm8994, WM8994_LDO_1 + i, 549 WM8994_LDO1_DISCH, WM8994_LDO1_DISCH); 550 else 551 wm8994_set_bits(wm8994, WM8994_LDO_1 + i, 552 WM8994_LDO1_DISCH, 0); 553 } 554 555 wm8994_irq_init(wm8994); 556 557 ret = mfd_add_devices(wm8994->dev, -1, 558 wm8994_devs, ARRAY_SIZE(wm8994_devs), 559 NULL, 0); 560 if (ret != 0) { 561 dev_err(wm8994->dev, "Failed to add children: %d\n", ret); 562 goto err_irq; 563 } 564 565 pm_runtime_enable(wm8994->dev); 566 pm_runtime_idle(wm8994->dev); 567 568 return 0; 569 570err_irq: 571 wm8994_irq_exit(wm8994); 572err_enable: 573 regulator_bulk_disable(wm8994->num_supplies, 574 wm8994->supplies); 575err_get: 576 regulator_bulk_free(wm8994->num_supplies, wm8994->supplies); 577err_regmap: 578 regmap_exit(wm8994->regmap); 579 mfd_remove_devices(wm8994->dev); 580 return ret; 581} 582 583static void wm8994_device_exit(struct wm8994 *wm8994) 584{ 585 pm_runtime_disable(wm8994->dev); 586 mfd_remove_devices(wm8994->dev); 587 wm8994_irq_exit(wm8994); 588 regulator_bulk_disable(wm8994->num_supplies, 589 wm8994->supplies); 590 regulator_bulk_free(wm8994->num_supplies, wm8994->supplies); 591 regmap_exit(wm8994->regmap); 592} 593 594static const struct of_device_id wm8994_of_match[] = { 595 { .compatible = "wlf,wm1811", }, 596 { .compatible = "wlf,wm8994", }, 597 { .compatible = "wlf,wm8958", }, 598 { } 599}; 600MODULE_DEVICE_TABLE(of, wm8994_of_match); 601 602static int wm8994_i2c_probe(struct i2c_client *i2c, 603 const struct i2c_device_id *id) 604{ 605 struct wm8994 *wm8994; 606 int ret; 607 608 wm8994 = devm_kzalloc(&i2c->dev, sizeof(struct wm8994), GFP_KERNEL); 609 if (wm8994 == NULL) 610 return -ENOMEM; 611 612 i2c_set_clientdata(i2c, wm8994); 613 wm8994->dev = &i2c->dev; 614 wm8994->irq = i2c->irq; 615 wm8994->type = id->driver_data; 616 617 wm8994->regmap = regmap_init_i2c(i2c, &wm8994_base_regmap_config); 618 if (IS_ERR(wm8994->regmap)) { 619 ret = PTR_ERR(wm8994->regmap); 620 dev_err(wm8994->dev, "Failed to allocate register map: %d\n", 621 ret); 622 return ret; 623 } 624 625 return wm8994_device_init(wm8994, i2c->irq); 626} 627 628static int wm8994_i2c_remove(struct i2c_client *i2c) 629{ 630 struct wm8994 *wm8994 = i2c_get_clientdata(i2c); 631 632 wm8994_device_exit(wm8994); 633 634 return 0; 635} 636 637static const struct i2c_device_id wm8994_i2c_id[] = { 638 { "wm1811", WM1811 }, 639 { "wm1811a", WM1811 }, 640 { "wm8994", WM8994 }, 641 { "wm8958", WM8958 }, 642 { } 643}; 644MODULE_DEVICE_TABLE(i2c, wm8994_i2c_id); 645 646static UNIVERSAL_DEV_PM_OPS(wm8994_pm_ops, wm8994_suspend, wm8994_resume, 647 NULL); 648 649static struct i2c_driver wm8994_i2c_driver = { 650 .driver = { 651 .name = "wm8994", 652 .owner = THIS_MODULE, 653 .pm = &wm8994_pm_ops, 654 .of_match_table = wm8994_of_match, 655 }, 656 .probe = wm8994_i2c_probe, 657 .remove = wm8994_i2c_remove, 658 .id_table = wm8994_i2c_id, 659}; 660 661static int __init wm8994_i2c_init(void) 662{ 663 int ret; 664 665 ret = i2c_add_driver(&wm8994_i2c_driver); 666 if (ret != 0) 667 pr_err("Failed to register wm8994 I2C driver: %d\n", ret); 668 669 return ret; 670} 671module_init(wm8994_i2c_init); 672 673static void __exit wm8994_i2c_exit(void) 674{ 675 i2c_del_driver(&wm8994_i2c_driver); 676} 677module_exit(wm8994_i2c_exit); 678 679MODULE_DESCRIPTION("Core support for the WM8994 audio CODEC"); 680MODULE_LICENSE("GPL"); 681MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>"); 682