Kconfig revision a61a8423c71d6da6f1f6f854d8adcea24b80bef6 
1menu "CAN Device Drivers"
2	depends on CAN
3
4config CAN_VCAN
5	tristate "Virtual Local CAN Interface (vcan)"
6	depends on CAN
7	default N
8	---help---
9	  Similar to the network loopback devices, vcan offers a
10	  virtual local CAN interface.
11
12	  This driver can also be built as a module.  If so, the module
13	  will be called vcan.
14
15config CAN_DEV
16	tristate "Platform CAN drivers with Netlink support"
17	depends on CAN
18	default Y
19	---help---
20	  Enables the common framework for platform CAN drivers with Netlink
21	  support. This is the standard library for CAN drivers.
22	  If unsure, say Y.
23
24config CAN_CALC_BITTIMING
25	bool "CAN bit-timing calculation"
26	depends on CAN_DEV
27	default Y
28	---help---
29	  If enabled, CAN bit-timing parameters will be calculated for the
30	  bit-rate specified via Netlink argument "bitrate" when the device
31	  get started. This works fine for the most common CAN controllers
32	  with standard bit-rates but may fail for exotic bit-rates or CAN
33	  source clock frequencies. Disabling saves some space, but then the
34	  bit-timing parameters must be specified directly using the Netlink
35	  arguments "tq", "prop_seg", "phase_seg1", "phase_seg2" and "sjw".
36	  If unsure, say Y.
37
38config CAN_SJA1000
39	depends on CAN_DEV
40	tristate "Philips SJA1000"
41	---help---
42	  Driver for the SJA1000 CAN controllers from Philips or NXP
43
44config CAN_SJA1000_PLATFORM
45	depends on CAN_SJA1000
46	tristate "Generic Platform Bus based SJA1000 driver"
47	---help---
48	  This driver adds support for the SJA1000 chips connected to
49	  the "platform bus" (Linux abstraction for directly to the
50	  processor attached devices).  Which can be found on various
51	  boards from Phytec (http://www.phytec.de) like the PCM027,
52	  PCM038.
53
54config CAN_EMS_PCI
55	tristate "EMS CPC-PCI and CPC-PCIe Card"
56	depends on PCI && CAN_SJA1000
57	---help---
58	  This driver is for the one or two channel CPC-PCI and CPC-PCIe
59	  cards from EMS Dr. Thomas Wuensche (http://www.ems-wuensche.de).
60
61config CAN_DEBUG_DEVICES
62	bool "CAN devices debugging messages"
63	depends on CAN
64	default N
65	---help---
66	  Say Y here if you want the CAN device drivers to produce a bunch of
67	  debug messages to the system log.  Select this if you are having
68	  a problem with CAN support and want to see more of what is going
69	  on.
70
71endmenu
72