c_can.c revision 881ff67ad45041f6ff08441aa17302aea77bd054
1/* 2 * CAN bus driver for Bosch C_CAN controller 3 * 4 * Copyright (C) 2010 ST Microelectronics 5 * Bhupesh Sharma <bhupesh.sharma@st.com> 6 * 7 * Borrowed heavily from the C_CAN driver originally written by: 8 * Copyright (C) 2007 9 * - Sascha Hauer, Marc Kleine-Budde, Pengutronix <s.hauer@pengutronix.de> 10 * - Simon Kallweit, intefo AG <simon.kallweit@intefo.ch> 11 * 12 * TX and RX NAPI implementation has been borrowed from at91 CAN driver 13 * written by: 14 * Copyright 15 * (C) 2007 by Hans J. Koch <hjk@hansjkoch.de> 16 * (C) 2008, 2009 by Marc Kleine-Budde <kernel@pengutronix.de> 17 * 18 * Bosch C_CAN controller is compliant to CAN protocol version 2.0 part A and B. 19 * Bosch C_CAN user manual can be obtained from: 20 * http://www.semiconductors.bosch.de/media/en/pdf/ipmodules_1/c_can/ 21 * users_manual_c_can.pdf 22 * 23 * This file is licensed under the terms of the GNU General Public 24 * License version 2. This program is licensed "as is" without any 25 * warranty of any kind, whether express or implied. 26 */ 27 28#include <linux/kernel.h> 29#include <linux/version.h> 30#include <linux/module.h> 31#include <linux/interrupt.h> 32#include <linux/delay.h> 33#include <linux/netdevice.h> 34#include <linux/if_arp.h> 35#include <linux/if_ether.h> 36#include <linux/list.h> 37#include <linux/delay.h> 38#include <linux/io.h> 39 40#include <linux/can.h> 41#include <linux/can/dev.h> 42#include <linux/can/error.h> 43 44#include "c_can.h" 45 46/* control register */ 47#define CONTROL_TEST BIT(7) 48#define CONTROL_CCE BIT(6) 49#define CONTROL_DISABLE_AR BIT(5) 50#define CONTROL_ENABLE_AR (0 << 5) 51#define CONTROL_EIE BIT(3) 52#define CONTROL_SIE BIT(2) 53#define CONTROL_IE BIT(1) 54#define CONTROL_INIT BIT(0) 55 56/* test register */ 57#define TEST_RX BIT(7) 58#define TEST_TX1 BIT(6) 59#define TEST_TX2 BIT(5) 60#define TEST_LBACK BIT(4) 61#define TEST_SILENT BIT(3) 62#define TEST_BASIC BIT(2) 63 64/* status register */ 65#define STATUS_BOFF BIT(7) 66#define STATUS_EWARN BIT(6) 67#define STATUS_EPASS BIT(5) 68#define STATUS_RXOK BIT(4) 69#define STATUS_TXOK BIT(3) 70 71/* error counter register */ 72#define ERR_CNT_TEC_MASK 0xff 73#define ERR_CNT_TEC_SHIFT 0 74#define ERR_CNT_REC_SHIFT 8 75#define ERR_CNT_REC_MASK (0x7f << ERR_CNT_REC_SHIFT) 76#define ERR_CNT_RP_SHIFT 15 77#define ERR_CNT_RP_MASK (0x1 << ERR_CNT_RP_SHIFT) 78 79/* bit-timing register */ 80#define BTR_BRP_MASK 0x3f 81#define BTR_BRP_SHIFT 0 82#define BTR_SJW_SHIFT 6 83#define BTR_SJW_MASK (0x3 << BTR_SJW_SHIFT) 84#define BTR_TSEG1_SHIFT 8 85#define BTR_TSEG1_MASK (0xf << BTR_TSEG1_SHIFT) 86#define BTR_TSEG2_SHIFT 12 87#define BTR_TSEG2_MASK (0x7 << BTR_TSEG2_SHIFT) 88 89/* brp extension register */ 90#define BRP_EXT_BRPE_MASK 0x0f 91#define BRP_EXT_BRPE_SHIFT 0 92 93/* IFx command request */ 94#define IF_COMR_BUSY BIT(15) 95 96/* IFx command mask */ 97#define IF_COMM_WR BIT(7) 98#define IF_COMM_MASK BIT(6) 99#define IF_COMM_ARB BIT(5) 100#define IF_COMM_CONTROL BIT(4) 101#define IF_COMM_CLR_INT_PND BIT(3) 102#define IF_COMM_TXRQST BIT(2) 103#define IF_COMM_DATAA BIT(1) 104#define IF_COMM_DATAB BIT(0) 105#define IF_COMM_ALL (IF_COMM_MASK | IF_COMM_ARB | \ 106 IF_COMM_CONTROL | IF_COMM_TXRQST | \ 107 IF_COMM_DATAA | IF_COMM_DATAB) 108 109/* IFx arbitration */ 110#define IF_ARB_MSGVAL BIT(15) 111#define IF_ARB_MSGXTD BIT(14) 112#define IF_ARB_TRANSMIT BIT(13) 113 114/* IFx message control */ 115#define IF_MCONT_NEWDAT BIT(15) 116#define IF_MCONT_MSGLST BIT(14) 117#define IF_MCONT_CLR_MSGLST (0 << 14) 118#define IF_MCONT_INTPND BIT(13) 119#define IF_MCONT_UMASK BIT(12) 120#define IF_MCONT_TXIE BIT(11) 121#define IF_MCONT_RXIE BIT(10) 122#define IF_MCONT_RMTEN BIT(9) 123#define IF_MCONT_TXRQST BIT(8) 124#define IF_MCONT_EOB BIT(7) 125#define IF_MCONT_DLC_MASK 0xf 126 127/* 128 * IFx register masks: 129 * allow easy operation on 16-bit registers when the 130 * argument is 32-bit instead 131 */ 132#define IFX_WRITE_LOW_16BIT(x) ((x) & 0xFFFF) 133#define IFX_WRITE_HIGH_16BIT(x) (((x) & 0xFFFF0000) >> 16) 134 135/* message object split */ 136#define C_CAN_NO_OF_OBJECTS 32 137#define C_CAN_MSG_OBJ_RX_NUM 16 138#define C_CAN_MSG_OBJ_TX_NUM 16 139 140#define C_CAN_MSG_OBJ_RX_FIRST 1 141#define C_CAN_MSG_OBJ_RX_LAST (C_CAN_MSG_OBJ_RX_FIRST + \ 142 C_CAN_MSG_OBJ_RX_NUM - 1) 143 144#define C_CAN_MSG_OBJ_TX_FIRST (C_CAN_MSG_OBJ_RX_LAST + 1) 145#define C_CAN_MSG_OBJ_TX_LAST (C_CAN_MSG_OBJ_TX_FIRST + \ 146 C_CAN_MSG_OBJ_TX_NUM - 1) 147 148#define C_CAN_MSG_OBJ_RX_SPLIT 9 149#define C_CAN_MSG_RX_LOW_LAST (C_CAN_MSG_OBJ_RX_SPLIT - 1) 150 151#define C_CAN_NEXT_MSG_OBJ_MASK (C_CAN_MSG_OBJ_TX_NUM - 1) 152#define RECEIVE_OBJECT_BITS 0x0000ffff 153 154/* status interrupt */ 155#define STATUS_INTERRUPT 0x8000 156 157/* global interrupt masks */ 158#define ENABLE_ALL_INTERRUPTS 1 159#define DISABLE_ALL_INTERRUPTS 0 160 161/* minimum timeout for checking BUSY status */ 162#define MIN_TIMEOUT_VALUE 6 163 164/* napi related */ 165#define C_CAN_NAPI_WEIGHT C_CAN_MSG_OBJ_RX_NUM 166 167/* c_can lec values */ 168enum c_can_lec_type { 169 LEC_NO_ERROR = 0, 170 LEC_STUFF_ERROR, 171 LEC_FORM_ERROR, 172 LEC_ACK_ERROR, 173 LEC_BIT1_ERROR, 174 LEC_BIT0_ERROR, 175 LEC_CRC_ERROR, 176 LEC_UNUSED, 177}; 178 179/* 180 * c_can error types: 181 * Bus errors (BUS_OFF, ERROR_WARNING, ERROR_PASSIVE) are supported 182 */ 183enum c_can_bus_error_types { 184 C_CAN_NO_ERROR = 0, 185 C_CAN_BUS_OFF, 186 C_CAN_ERROR_WARNING, 187 C_CAN_ERROR_PASSIVE, 188}; 189 190static struct can_bittiming_const c_can_bittiming_const = { 191 .name = KBUILD_MODNAME, 192 .tseg1_min = 2, /* Time segment 1 = prop_seg + phase_seg1 */ 193 .tseg1_max = 16, 194 .tseg2_min = 1, /* Time segment 2 = phase_seg2 */ 195 .tseg2_max = 8, 196 .sjw_max = 4, 197 .brp_min = 1, 198 .brp_max = 1024, /* 6-bit BRP field + 4-bit BRPE field*/ 199 .brp_inc = 1, 200}; 201 202static inline int get_tx_next_msg_obj(const struct c_can_priv *priv) 203{ 204 return (priv->tx_next & C_CAN_NEXT_MSG_OBJ_MASK) + 205 C_CAN_MSG_OBJ_TX_FIRST; 206} 207 208static inline int get_tx_echo_msg_obj(const struct c_can_priv *priv) 209{ 210 return (priv->tx_echo & C_CAN_NEXT_MSG_OBJ_MASK) + 211 C_CAN_MSG_OBJ_TX_FIRST; 212} 213 214static u32 c_can_read_reg32(struct c_can_priv *priv, void *reg) 215{ 216 u32 val = priv->read_reg(priv, reg); 217 val |= ((u32) priv->read_reg(priv, reg + 2)) << 16; 218 return val; 219} 220 221static void c_can_enable_all_interrupts(struct c_can_priv *priv, 222 int enable) 223{ 224 unsigned int cntrl_save = priv->read_reg(priv, 225 &priv->regs->control); 226 227 if (enable) 228 cntrl_save |= (CONTROL_SIE | CONTROL_EIE | CONTROL_IE); 229 else 230 cntrl_save &= ~(CONTROL_EIE | CONTROL_IE | CONTROL_SIE); 231 232 priv->write_reg(priv, &priv->regs->control, cntrl_save); 233} 234 235static inline int c_can_msg_obj_is_busy(struct c_can_priv *priv, int iface) 236{ 237 int count = MIN_TIMEOUT_VALUE; 238 239 while (count && priv->read_reg(priv, 240 &priv->regs->ifregs[iface].com_req) & 241 IF_COMR_BUSY) { 242 count--; 243 udelay(1); 244 } 245 246 if (!count) 247 return 1; 248 249 return 0; 250} 251 252static inline void c_can_object_get(struct net_device *dev, 253 int iface, int objno, int mask) 254{ 255 struct c_can_priv *priv = netdev_priv(dev); 256 257 /* 258 * As per specs, after writting the message object number in the 259 * IF command request register the transfer b/w interface 260 * register and message RAM must be complete in 6 CAN-CLK 261 * period. 262 */ 263 priv->write_reg(priv, &priv->regs->ifregs[iface].com_mask, 264 IFX_WRITE_LOW_16BIT(mask)); 265 priv->write_reg(priv, &priv->regs->ifregs[iface].com_req, 266 IFX_WRITE_LOW_16BIT(objno)); 267 268 if (c_can_msg_obj_is_busy(priv, iface)) 269 netdev_err(dev, "timed out in object get\n"); 270} 271 272static inline void c_can_object_put(struct net_device *dev, 273 int iface, int objno, int mask) 274{ 275 struct c_can_priv *priv = netdev_priv(dev); 276 277 /* 278 * As per specs, after writting the message object number in the 279 * IF command request register the transfer b/w interface 280 * register and message RAM must be complete in 6 CAN-CLK 281 * period. 282 */ 283 priv->write_reg(priv, &priv->regs->ifregs[iface].com_mask, 284 (IF_COMM_WR | IFX_WRITE_LOW_16BIT(mask))); 285 priv->write_reg(priv, &priv->regs->ifregs[iface].com_req, 286 IFX_WRITE_LOW_16BIT(objno)); 287 288 if (c_can_msg_obj_is_busy(priv, iface)) 289 netdev_err(dev, "timed out in object put\n"); 290} 291 292static void c_can_write_msg_object(struct net_device *dev, 293 int iface, struct can_frame *frame, int objno) 294{ 295 int i; 296 u16 flags = 0; 297 unsigned int id; 298 struct c_can_priv *priv = netdev_priv(dev); 299 300 if (!(frame->can_id & CAN_RTR_FLAG)) 301 flags |= IF_ARB_TRANSMIT; 302 303 if (frame->can_id & CAN_EFF_FLAG) { 304 id = frame->can_id & CAN_EFF_MASK; 305 flags |= IF_ARB_MSGXTD; 306 } else 307 id = ((frame->can_id & CAN_SFF_MASK) << 18); 308 309 flags |= IF_ARB_MSGVAL; 310 311 priv->write_reg(priv, &priv->regs->ifregs[iface].arb1, 312 IFX_WRITE_LOW_16BIT(id)); 313 priv->write_reg(priv, &priv->regs->ifregs[iface].arb2, flags | 314 IFX_WRITE_HIGH_16BIT(id)); 315 316 for (i = 0; i < frame->can_dlc; i += 2) { 317 priv->write_reg(priv, &priv->regs->ifregs[iface].data[i / 2], 318 frame->data[i] | (frame->data[i + 1] << 8)); 319 } 320 321 /* enable interrupt for this message object */ 322 priv->write_reg(priv, &priv->regs->ifregs[iface].msg_cntrl, 323 IF_MCONT_TXIE | IF_MCONT_TXRQST | IF_MCONT_EOB | 324 frame->can_dlc); 325 c_can_object_put(dev, iface, objno, IF_COMM_ALL); 326} 327 328static inline void c_can_mark_rx_msg_obj(struct net_device *dev, 329 int iface, int ctrl_mask, 330 int obj) 331{ 332 struct c_can_priv *priv = netdev_priv(dev); 333 334 priv->write_reg(priv, &priv->regs->ifregs[iface].msg_cntrl, 335 ctrl_mask & ~(IF_MCONT_MSGLST | IF_MCONT_INTPND)); 336 c_can_object_put(dev, iface, obj, IF_COMM_CONTROL); 337 338} 339 340static inline void c_can_activate_all_lower_rx_msg_obj(struct net_device *dev, 341 int iface, 342 int ctrl_mask) 343{ 344 int i; 345 struct c_can_priv *priv = netdev_priv(dev); 346 347 for (i = C_CAN_MSG_OBJ_RX_FIRST; i <= C_CAN_MSG_RX_LOW_LAST; i++) { 348 priv->write_reg(priv, &priv->regs->ifregs[iface].msg_cntrl, 349 ctrl_mask & ~(IF_MCONT_MSGLST | 350 IF_MCONT_INTPND | IF_MCONT_NEWDAT)); 351 c_can_object_put(dev, iface, i, IF_COMM_CONTROL); 352 } 353} 354 355static inline void c_can_activate_rx_msg_obj(struct net_device *dev, 356 int iface, int ctrl_mask, 357 int obj) 358{ 359 struct c_can_priv *priv = netdev_priv(dev); 360 361 priv->write_reg(priv, &priv->regs->ifregs[iface].msg_cntrl, 362 ctrl_mask & ~(IF_MCONT_MSGLST | 363 IF_MCONT_INTPND | IF_MCONT_NEWDAT)); 364 c_can_object_put(dev, iface, obj, IF_COMM_CONTROL); 365} 366 367static void c_can_handle_lost_msg_obj(struct net_device *dev, 368 int iface, int objno) 369{ 370 struct c_can_priv *priv = netdev_priv(dev); 371 struct net_device_stats *stats = &dev->stats; 372 struct sk_buff *skb; 373 struct can_frame *frame; 374 375 netdev_err(dev, "msg lost in buffer %d\n", objno); 376 377 c_can_object_get(dev, iface, objno, IF_COMM_ALL & ~IF_COMM_TXRQST); 378 379 priv->write_reg(priv, &priv->regs->ifregs[iface].msg_cntrl, 380 IF_MCONT_CLR_MSGLST); 381 382 c_can_object_put(dev, 0, objno, IF_COMM_CONTROL); 383 384 /* create an error msg */ 385 skb = alloc_can_err_skb(dev, &frame); 386 if (unlikely(!skb)) 387 return; 388 389 frame->can_id |= CAN_ERR_CRTL; 390 frame->data[1] = CAN_ERR_CRTL_RX_OVERFLOW; 391 stats->rx_errors++; 392 stats->rx_over_errors++; 393 394 netif_receive_skb(skb); 395} 396 397static int c_can_read_msg_object(struct net_device *dev, int iface, int ctrl) 398{ 399 u16 flags, data; 400 int i; 401 unsigned int val; 402 struct c_can_priv *priv = netdev_priv(dev); 403 struct net_device_stats *stats = &dev->stats; 404 struct sk_buff *skb; 405 struct can_frame *frame; 406 407 skb = alloc_can_skb(dev, &frame); 408 if (!skb) { 409 stats->rx_dropped++; 410 return -ENOMEM; 411 } 412 413 frame->can_dlc = get_can_dlc(ctrl & 0x0F); 414 415 flags = priv->read_reg(priv, &priv->regs->ifregs[iface].arb2); 416 val = priv->read_reg(priv, &priv->regs->ifregs[iface].arb1) | 417 (flags << 16); 418 419 if (flags & IF_ARB_MSGXTD) 420 frame->can_id = (val & CAN_EFF_MASK) | CAN_EFF_FLAG; 421 else 422 frame->can_id = (val >> 18) & CAN_SFF_MASK; 423 424 if (flags & IF_ARB_TRANSMIT) 425 frame->can_id |= CAN_RTR_FLAG; 426 else { 427 for (i = 0; i < frame->can_dlc; i += 2) { 428 data = priv->read_reg(priv, 429 &priv->regs->ifregs[iface].data[i / 2]); 430 frame->data[i] = data; 431 frame->data[i + 1] = data >> 8; 432 } 433 } 434 435 netif_receive_skb(skb); 436 437 stats->rx_packets++; 438 stats->rx_bytes += frame->can_dlc; 439 440 return 0; 441} 442 443static void c_can_setup_receive_object(struct net_device *dev, int iface, 444 int objno, unsigned int mask, 445 unsigned int id, unsigned int mcont) 446{ 447 struct c_can_priv *priv = netdev_priv(dev); 448 449 priv->write_reg(priv, &priv->regs->ifregs[iface].mask1, 450 IFX_WRITE_LOW_16BIT(mask)); 451 priv->write_reg(priv, &priv->regs->ifregs[iface].mask2, 452 IFX_WRITE_HIGH_16BIT(mask)); 453 454 priv->write_reg(priv, &priv->regs->ifregs[iface].arb1, 455 IFX_WRITE_LOW_16BIT(id)); 456 priv->write_reg(priv, &priv->regs->ifregs[iface].arb2, 457 (IF_ARB_MSGVAL | IFX_WRITE_HIGH_16BIT(id))); 458 459 priv->write_reg(priv, &priv->regs->ifregs[iface].msg_cntrl, mcont); 460 c_can_object_put(dev, iface, objno, IF_COMM_ALL & ~IF_COMM_TXRQST); 461 462 netdev_dbg(dev, "obj no:%d, msgval:0x%08x\n", objno, 463 c_can_read_reg32(priv, &priv->regs->msgval1)); 464} 465 466static void c_can_inval_msg_object(struct net_device *dev, int iface, int objno) 467{ 468 struct c_can_priv *priv = netdev_priv(dev); 469 470 priv->write_reg(priv, &priv->regs->ifregs[iface].arb1, 0); 471 priv->write_reg(priv, &priv->regs->ifregs[iface].arb2, 0); 472 priv->write_reg(priv, &priv->regs->ifregs[iface].msg_cntrl, 0); 473 474 c_can_object_put(dev, iface, objno, IF_COMM_ARB | IF_COMM_CONTROL); 475 476 netdev_dbg(dev, "obj no:%d, msgval:0x%08x\n", objno, 477 c_can_read_reg32(priv, &priv->regs->msgval1)); 478} 479 480static inline int c_can_is_next_tx_obj_busy(struct c_can_priv *priv, int objno) 481{ 482 int val = c_can_read_reg32(priv, &priv->regs->txrqst1); 483 484 /* 485 * as transmission request register's bit n-1 corresponds to 486 * message object n, we need to handle the same properly. 487 */ 488 if (val & (1 << (objno - 1))) 489 return 1; 490 491 return 0; 492} 493 494static netdev_tx_t c_can_start_xmit(struct sk_buff *skb, 495 struct net_device *dev) 496{ 497 u32 msg_obj_no; 498 struct c_can_priv *priv = netdev_priv(dev); 499 struct can_frame *frame = (struct can_frame *)skb->data; 500 501 if (can_dropped_invalid_skb(dev, skb)) 502 return NETDEV_TX_OK; 503 504 msg_obj_no = get_tx_next_msg_obj(priv); 505 506 /* prepare message object for transmission */ 507 c_can_write_msg_object(dev, 0, frame, msg_obj_no); 508 can_put_echo_skb(skb, dev, msg_obj_no - C_CAN_MSG_OBJ_TX_FIRST); 509 510 /* 511 * we have to stop the queue in case of a wrap around or 512 * if the next TX message object is still in use 513 */ 514 priv->tx_next++; 515 if (c_can_is_next_tx_obj_busy(priv, get_tx_next_msg_obj(priv)) || 516 (priv->tx_next & C_CAN_NEXT_MSG_OBJ_MASK) == 0) 517 netif_stop_queue(dev); 518 519 return NETDEV_TX_OK; 520} 521 522static int c_can_set_bittiming(struct net_device *dev) 523{ 524 unsigned int reg_btr, reg_brpe, ctrl_save; 525 u8 brp, brpe, sjw, tseg1, tseg2; 526 u32 ten_bit_brp; 527 struct c_can_priv *priv = netdev_priv(dev); 528 const struct can_bittiming *bt = &priv->can.bittiming; 529 530 /* c_can provides a 6-bit brp and 4-bit brpe fields */ 531 ten_bit_brp = bt->brp - 1; 532 brp = ten_bit_brp & BTR_BRP_MASK; 533 brpe = ten_bit_brp >> 6; 534 535 sjw = bt->sjw - 1; 536 tseg1 = bt->prop_seg + bt->phase_seg1 - 1; 537 tseg2 = bt->phase_seg2 - 1; 538 reg_btr = brp | (sjw << BTR_SJW_SHIFT) | (tseg1 << BTR_TSEG1_SHIFT) | 539 (tseg2 << BTR_TSEG2_SHIFT); 540 reg_brpe = brpe & BRP_EXT_BRPE_MASK; 541 542 netdev_info(dev, 543 "setting BTR=%04x BRPE=%04x\n", reg_btr, reg_brpe); 544 545 ctrl_save = priv->read_reg(priv, &priv->regs->control); 546 priv->write_reg(priv, &priv->regs->control, 547 ctrl_save | CONTROL_CCE | CONTROL_INIT); 548 priv->write_reg(priv, &priv->regs->btr, reg_btr); 549 priv->write_reg(priv, &priv->regs->brp_ext, reg_brpe); 550 priv->write_reg(priv, &priv->regs->control, ctrl_save); 551 552 return 0; 553} 554 555/* 556 * Configure C_CAN message objects for Tx and Rx purposes: 557 * C_CAN provides a total of 32 message objects that can be configured 558 * either for Tx or Rx purposes. Here the first 16 message objects are used as 559 * a reception FIFO. The end of reception FIFO is signified by the EoB bit 560 * being SET. The remaining 16 message objects are kept aside for Tx purposes. 561 * See user guide document for further details on configuring message 562 * objects. 563 */ 564static void c_can_configure_msg_objects(struct net_device *dev) 565{ 566 int i; 567 568 /* first invalidate all message objects */ 569 for (i = C_CAN_MSG_OBJ_RX_FIRST; i <= C_CAN_NO_OF_OBJECTS; i++) 570 c_can_inval_msg_object(dev, 0, i); 571 572 /* setup receive message objects */ 573 for (i = C_CAN_MSG_OBJ_RX_FIRST; i < C_CAN_MSG_OBJ_RX_LAST; i++) 574 c_can_setup_receive_object(dev, 0, i, 0, 0, 575 (IF_MCONT_RXIE | IF_MCONT_UMASK) & ~IF_MCONT_EOB); 576 577 c_can_setup_receive_object(dev, 0, C_CAN_MSG_OBJ_RX_LAST, 0, 0, 578 IF_MCONT_EOB | IF_MCONT_RXIE | IF_MCONT_UMASK); 579} 580 581/* 582 * Configure C_CAN chip: 583 * - enable/disable auto-retransmission 584 * - set operating mode 585 * - configure message objects 586 */ 587static void c_can_chip_config(struct net_device *dev) 588{ 589 struct c_can_priv *priv = netdev_priv(dev); 590 591 if (priv->can.ctrlmode & CAN_CTRLMODE_ONE_SHOT) 592 /* disable automatic retransmission */ 593 priv->write_reg(priv, &priv->regs->control, 594 CONTROL_DISABLE_AR); 595 else 596 /* enable automatic retransmission */ 597 priv->write_reg(priv, &priv->regs->control, 598 CONTROL_ENABLE_AR); 599 600 if (priv->can.ctrlmode & (CAN_CTRLMODE_LISTENONLY & 601 CAN_CTRLMODE_LOOPBACK)) { 602 /* loopback + silent mode : useful for hot self-test */ 603 priv->write_reg(priv, &priv->regs->control, CONTROL_EIE | 604 CONTROL_SIE | CONTROL_IE | CONTROL_TEST); 605 priv->write_reg(priv, &priv->regs->test, 606 TEST_LBACK | TEST_SILENT); 607 } else if (priv->can.ctrlmode & CAN_CTRLMODE_LOOPBACK) { 608 /* loopback mode : useful for self-test function */ 609 priv->write_reg(priv, &priv->regs->control, CONTROL_EIE | 610 CONTROL_SIE | CONTROL_IE | CONTROL_TEST); 611 priv->write_reg(priv, &priv->regs->test, TEST_LBACK); 612 } else if (priv->can.ctrlmode & CAN_CTRLMODE_LISTENONLY) { 613 /* silent mode : bus-monitoring mode */ 614 priv->write_reg(priv, &priv->regs->control, CONTROL_EIE | 615 CONTROL_SIE | CONTROL_IE | CONTROL_TEST); 616 priv->write_reg(priv, &priv->regs->test, TEST_SILENT); 617 } else 618 /* normal mode*/ 619 priv->write_reg(priv, &priv->regs->control, 620 CONTROL_EIE | CONTROL_SIE | CONTROL_IE); 621 622 /* configure message objects */ 623 c_can_configure_msg_objects(dev); 624 625 /* set a `lec` value so that we can check for updates later */ 626 priv->write_reg(priv, &priv->regs->status, LEC_UNUSED); 627 628 /* set bittiming params */ 629 c_can_set_bittiming(dev); 630} 631 632static void c_can_start(struct net_device *dev) 633{ 634 struct c_can_priv *priv = netdev_priv(dev); 635 636 /* enable status change, error and module interrupts */ 637 c_can_enable_all_interrupts(priv, ENABLE_ALL_INTERRUPTS); 638 639 /* basic c_can configuration */ 640 c_can_chip_config(dev); 641 642 priv->can.state = CAN_STATE_ERROR_ACTIVE; 643 644 /* reset tx helper pointers */ 645 priv->tx_next = priv->tx_echo = 0; 646} 647 648static void c_can_stop(struct net_device *dev) 649{ 650 struct c_can_priv *priv = netdev_priv(dev); 651 652 /* disable all interrupts */ 653 c_can_enable_all_interrupts(priv, DISABLE_ALL_INTERRUPTS); 654 655 /* set the state as STOPPED */ 656 priv->can.state = CAN_STATE_STOPPED; 657} 658 659static int c_can_set_mode(struct net_device *dev, enum can_mode mode) 660{ 661 switch (mode) { 662 case CAN_MODE_START: 663 c_can_start(dev); 664 netif_wake_queue(dev); 665 break; 666 default: 667 return -EOPNOTSUPP; 668 } 669 670 return 0; 671} 672 673static int c_can_get_berr_counter(const struct net_device *dev, 674 struct can_berr_counter *bec) 675{ 676 unsigned int reg_err_counter; 677 struct c_can_priv *priv = netdev_priv(dev); 678 679 reg_err_counter = priv->read_reg(priv, &priv->regs->err_cnt); 680 bec->rxerr = (reg_err_counter & ERR_CNT_REC_MASK) >> 681 ERR_CNT_REC_SHIFT; 682 bec->txerr = reg_err_counter & ERR_CNT_TEC_MASK; 683 684 return 0; 685} 686 687/* 688 * theory of operation: 689 * 690 * priv->tx_echo holds the number of the oldest can_frame put for 691 * transmission into the hardware, but not yet ACKed by the CAN tx 692 * complete IRQ. 693 * 694 * We iterate from priv->tx_echo to priv->tx_next and check if the 695 * packet has been transmitted, echo it back to the CAN framework. 696 * If we discover a not yet transmitted package, stop looking for more. 697 */ 698static void c_can_do_tx(struct net_device *dev) 699{ 700 u32 val; 701 u32 msg_obj_no; 702 struct c_can_priv *priv = netdev_priv(dev); 703 struct net_device_stats *stats = &dev->stats; 704 705 for (/* nix */; (priv->tx_next - priv->tx_echo) > 0; priv->tx_echo++) { 706 msg_obj_no = get_tx_echo_msg_obj(priv); 707 c_can_inval_msg_object(dev, 0, msg_obj_no); 708 val = c_can_read_reg32(priv, &priv->regs->txrqst1); 709 if (!(val & (1 << msg_obj_no))) { 710 can_get_echo_skb(dev, 711 msg_obj_no - C_CAN_MSG_OBJ_TX_FIRST); 712 stats->tx_bytes += priv->read_reg(priv, 713 &priv->regs->ifregs[0].msg_cntrl) 714 & IF_MCONT_DLC_MASK; 715 stats->tx_packets++; 716 } 717 } 718 719 /* restart queue if wrap-up or if queue stalled on last pkt */ 720 if (((priv->tx_next & C_CAN_NEXT_MSG_OBJ_MASK) != 0) || 721 ((priv->tx_echo & C_CAN_NEXT_MSG_OBJ_MASK) == 0)) 722 netif_wake_queue(dev); 723} 724 725/* 726 * theory of operation: 727 * 728 * c_can core saves a received CAN message into the first free message 729 * object it finds free (starting with the lowest). Bits NEWDAT and 730 * INTPND are set for this message object indicating that a new message 731 * has arrived. To work-around this issue, we keep two groups of message 732 * objects whose partitioning is defined by C_CAN_MSG_OBJ_RX_SPLIT. 733 * 734 * To ensure in-order frame reception we use the following 735 * approach while re-activating a message object to receive further 736 * frames: 737 * - if the current message object number is lower than 738 * C_CAN_MSG_RX_LOW_LAST, do not clear the NEWDAT bit while clearing 739 * the INTPND bit. 740 * - if the current message object number is equal to 741 * C_CAN_MSG_RX_LOW_LAST then clear the NEWDAT bit of all lower 742 * receive message objects. 743 * - if the current message object number is greater than 744 * C_CAN_MSG_RX_LOW_LAST then clear the NEWDAT bit of 745 * only this message object. 746 */ 747static int c_can_do_rx_poll(struct net_device *dev, int quota) 748{ 749 u32 num_rx_pkts = 0; 750 unsigned int msg_obj, msg_ctrl_save; 751 struct c_can_priv *priv = netdev_priv(dev); 752 u32 val = c_can_read_reg32(priv, &priv->regs->intpnd1); 753 754 for (msg_obj = C_CAN_MSG_OBJ_RX_FIRST; 755 msg_obj <= C_CAN_MSG_OBJ_RX_LAST && quota > 0; 756 val = c_can_read_reg32(priv, &priv->regs->intpnd1), 757 msg_obj++) { 758 /* 759 * as interrupt pending register's bit n-1 corresponds to 760 * message object n, we need to handle the same properly. 761 */ 762 if (val & (1 << (msg_obj - 1))) { 763 c_can_object_get(dev, 0, msg_obj, IF_COMM_ALL & 764 ~IF_COMM_TXRQST); 765 msg_ctrl_save = priv->read_reg(priv, 766 &priv->regs->ifregs[0].msg_cntrl); 767 768 if (msg_ctrl_save & IF_MCONT_EOB) 769 return num_rx_pkts; 770 771 if (msg_ctrl_save & IF_MCONT_MSGLST) { 772 c_can_handle_lost_msg_obj(dev, 0, msg_obj); 773 num_rx_pkts++; 774 quota--; 775 continue; 776 } 777 778 if (!(msg_ctrl_save & IF_MCONT_NEWDAT)) 779 continue; 780 781 /* read the data from the message object */ 782 c_can_read_msg_object(dev, 0, msg_ctrl_save); 783 784 if (msg_obj < C_CAN_MSG_RX_LOW_LAST) 785 c_can_mark_rx_msg_obj(dev, 0, 786 msg_ctrl_save, msg_obj); 787 else if (msg_obj > C_CAN_MSG_RX_LOW_LAST) 788 /* activate this msg obj */ 789 c_can_activate_rx_msg_obj(dev, 0, 790 msg_ctrl_save, msg_obj); 791 else if (msg_obj == C_CAN_MSG_RX_LOW_LAST) 792 /* activate all lower message objects */ 793 c_can_activate_all_lower_rx_msg_obj(dev, 794 0, msg_ctrl_save); 795 796 num_rx_pkts++; 797 quota--; 798 } 799 } 800 801 return num_rx_pkts; 802} 803 804static inline int c_can_has_and_handle_berr(struct c_can_priv *priv) 805{ 806 return (priv->can.ctrlmode & CAN_CTRLMODE_BERR_REPORTING) && 807 (priv->current_status & LEC_UNUSED); 808} 809 810static int c_can_handle_state_change(struct net_device *dev, 811 enum c_can_bus_error_types error_type) 812{ 813 unsigned int reg_err_counter; 814 unsigned int rx_err_passive; 815 struct c_can_priv *priv = netdev_priv(dev); 816 struct net_device_stats *stats = &dev->stats; 817 struct can_frame *cf; 818 struct sk_buff *skb; 819 struct can_berr_counter bec; 820 821 /* propogate the error condition to the CAN stack */ 822 skb = alloc_can_err_skb(dev, &cf); 823 if (unlikely(!skb)) 824 return 0; 825 826 c_can_get_berr_counter(dev, &bec); 827 reg_err_counter = priv->read_reg(priv, &priv->regs->err_cnt); 828 rx_err_passive = (reg_err_counter & ERR_CNT_RP_MASK) >> 829 ERR_CNT_RP_SHIFT; 830 831 switch (error_type) { 832 case C_CAN_ERROR_WARNING: 833 /* error warning state */ 834 priv->can.can_stats.error_warning++; 835 priv->can.state = CAN_STATE_ERROR_WARNING; 836 cf->can_id |= CAN_ERR_CRTL; 837 cf->data[1] = (bec.txerr > bec.rxerr) ? 838 CAN_ERR_CRTL_TX_WARNING : 839 CAN_ERR_CRTL_RX_WARNING; 840 cf->data[6] = bec.txerr; 841 cf->data[7] = bec.rxerr; 842 843 break; 844 case C_CAN_ERROR_PASSIVE: 845 /* error passive state */ 846 priv->can.can_stats.error_passive++; 847 priv->can.state = CAN_STATE_ERROR_PASSIVE; 848 cf->can_id |= CAN_ERR_CRTL; 849 if (rx_err_passive) 850 cf->data[1] |= CAN_ERR_CRTL_RX_PASSIVE; 851 if (bec.txerr > 127) 852 cf->data[1] |= CAN_ERR_CRTL_TX_PASSIVE; 853 854 cf->data[6] = bec.txerr; 855 cf->data[7] = bec.rxerr; 856 break; 857 case C_CAN_BUS_OFF: 858 /* bus-off state */ 859 priv->can.state = CAN_STATE_BUS_OFF; 860 cf->can_id |= CAN_ERR_BUSOFF; 861 /* 862 * disable all interrupts in bus-off mode to ensure that 863 * the CPU is not hogged down 864 */ 865 c_can_enable_all_interrupts(priv, DISABLE_ALL_INTERRUPTS); 866 can_bus_off(dev); 867 break; 868 default: 869 break; 870 } 871 872 netif_receive_skb(skb); 873 stats->rx_packets++; 874 stats->rx_bytes += cf->can_dlc; 875 876 return 1; 877} 878 879static int c_can_handle_bus_err(struct net_device *dev, 880 enum c_can_lec_type lec_type) 881{ 882 struct c_can_priv *priv = netdev_priv(dev); 883 struct net_device_stats *stats = &dev->stats; 884 struct can_frame *cf; 885 struct sk_buff *skb; 886 887 /* 888 * early exit if no lec update or no error. 889 * no lec update means that no CAN bus event has been detected 890 * since CPU wrote 0x7 value to status reg. 891 */ 892 if (lec_type == LEC_UNUSED || lec_type == LEC_NO_ERROR) 893 return 0; 894 895 /* propogate the error condition to the CAN stack */ 896 skb = alloc_can_err_skb(dev, &cf); 897 if (unlikely(!skb)) 898 return 0; 899 900 /* 901 * check for 'last error code' which tells us the 902 * type of the last error to occur on the CAN bus 903 */ 904 905 /* common for all type of bus errors */ 906 priv->can.can_stats.bus_error++; 907 stats->rx_errors++; 908 cf->can_id |= CAN_ERR_PROT | CAN_ERR_BUSERROR; 909 cf->data[2] |= CAN_ERR_PROT_UNSPEC; 910 911 switch (lec_type) { 912 case LEC_STUFF_ERROR: 913 netdev_dbg(dev, "stuff error\n"); 914 cf->data[2] |= CAN_ERR_PROT_STUFF; 915 break; 916 case LEC_FORM_ERROR: 917 netdev_dbg(dev, "form error\n"); 918 cf->data[2] |= CAN_ERR_PROT_FORM; 919 break; 920 case LEC_ACK_ERROR: 921 netdev_dbg(dev, "ack error\n"); 922 cf->data[2] |= (CAN_ERR_PROT_LOC_ACK | 923 CAN_ERR_PROT_LOC_ACK_DEL); 924 break; 925 case LEC_BIT1_ERROR: 926 netdev_dbg(dev, "bit1 error\n"); 927 cf->data[2] |= CAN_ERR_PROT_BIT1; 928 break; 929 case LEC_BIT0_ERROR: 930 netdev_dbg(dev, "bit0 error\n"); 931 cf->data[2] |= CAN_ERR_PROT_BIT0; 932 break; 933 case LEC_CRC_ERROR: 934 netdev_dbg(dev, "CRC error\n"); 935 cf->data[2] |= (CAN_ERR_PROT_LOC_CRC_SEQ | 936 CAN_ERR_PROT_LOC_CRC_DEL); 937 break; 938 default: 939 break; 940 } 941 942 /* set a `lec` value so that we can check for updates later */ 943 priv->write_reg(priv, &priv->regs->status, LEC_UNUSED); 944 945 netif_receive_skb(skb); 946 stats->rx_packets++; 947 stats->rx_bytes += cf->can_dlc; 948 949 return 1; 950} 951 952static int c_can_poll(struct napi_struct *napi, int quota) 953{ 954 u16 irqstatus; 955 int lec_type = 0; 956 int work_done = 0; 957 struct net_device *dev = napi->dev; 958 struct c_can_priv *priv = netdev_priv(dev); 959 960 irqstatus = priv->read_reg(priv, &priv->regs->interrupt); 961 if (!irqstatus) 962 goto end; 963 964 /* status events have the highest priority */ 965 if (irqstatus == STATUS_INTERRUPT) { 966 priv->current_status = priv->read_reg(priv, 967 &priv->regs->status); 968 969 /* handle Tx/Rx events */ 970 if (priv->current_status & STATUS_TXOK) 971 priv->write_reg(priv, &priv->regs->status, 972 priv->current_status & ~STATUS_TXOK); 973 974 if (priv->current_status & STATUS_RXOK) 975 priv->write_reg(priv, &priv->regs->status, 976 priv->current_status & ~STATUS_RXOK); 977 978 /* handle state changes */ 979 if ((priv->current_status & STATUS_EWARN) && 980 (!(priv->last_status & STATUS_EWARN))) { 981 netdev_dbg(dev, "entered error warning state\n"); 982 work_done += c_can_handle_state_change(dev, 983 C_CAN_ERROR_WARNING); 984 } 985 if ((priv->current_status & STATUS_EPASS) && 986 (!(priv->last_status & STATUS_EPASS))) { 987 netdev_dbg(dev, "entered error passive state\n"); 988 work_done += c_can_handle_state_change(dev, 989 C_CAN_ERROR_PASSIVE); 990 } 991 if ((priv->current_status & STATUS_BOFF) && 992 (!(priv->last_status & STATUS_BOFF))) { 993 netdev_dbg(dev, "entered bus off state\n"); 994 work_done += c_can_handle_state_change(dev, 995 C_CAN_BUS_OFF); 996 } 997 998 /* handle bus recovery events */ 999 if ((!(priv->current_status & STATUS_BOFF)) && 1000 (priv->last_status & STATUS_BOFF)) { 1001 netdev_dbg(dev, "left bus off state\n"); 1002 priv->can.state = CAN_STATE_ERROR_ACTIVE; 1003 } 1004 if ((!(priv->current_status & STATUS_EPASS)) && 1005 (priv->last_status & STATUS_EPASS)) { 1006 netdev_dbg(dev, "left error passive state\n"); 1007 priv->can.state = CAN_STATE_ERROR_ACTIVE; 1008 } 1009 1010 priv->last_status = priv->current_status; 1011 1012 /* handle lec errors on the bus */ 1013 lec_type = c_can_has_and_handle_berr(priv); 1014 if (lec_type) 1015 work_done += c_can_handle_bus_err(dev, lec_type); 1016 } else if ((irqstatus >= C_CAN_MSG_OBJ_RX_FIRST) && 1017 (irqstatus <= C_CAN_MSG_OBJ_RX_LAST)) { 1018 /* handle events corresponding to receive message objects */ 1019 work_done += c_can_do_rx_poll(dev, (quota - work_done)); 1020 } else if ((irqstatus >= C_CAN_MSG_OBJ_TX_FIRST) && 1021 (irqstatus <= C_CAN_MSG_OBJ_TX_LAST)) { 1022 /* handle events corresponding to transmit message objects */ 1023 c_can_do_tx(dev); 1024 } 1025 1026end: 1027 if (work_done < quota) { 1028 napi_complete(napi); 1029 /* enable all IRQs */ 1030 c_can_enable_all_interrupts(priv, ENABLE_ALL_INTERRUPTS); 1031 } 1032 1033 return work_done; 1034} 1035 1036static irqreturn_t c_can_isr(int irq, void *dev_id) 1037{ 1038 u16 irqstatus; 1039 struct net_device *dev = (struct net_device *)dev_id; 1040 struct c_can_priv *priv = netdev_priv(dev); 1041 1042 irqstatus = priv->read_reg(priv, &priv->regs->interrupt); 1043 if (!irqstatus) 1044 return IRQ_NONE; 1045 1046 /* disable all interrupts and schedule the NAPI */ 1047 c_can_enable_all_interrupts(priv, DISABLE_ALL_INTERRUPTS); 1048 napi_schedule(&priv->napi); 1049 1050 return IRQ_HANDLED; 1051} 1052 1053static int c_can_open(struct net_device *dev) 1054{ 1055 int err; 1056 struct c_can_priv *priv = netdev_priv(dev); 1057 1058 /* open the can device */ 1059 err = open_candev(dev); 1060 if (err) { 1061 netdev_err(dev, "failed to open can device\n"); 1062 return err; 1063 } 1064 1065 /* register interrupt handler */ 1066 err = request_irq(dev->irq, &c_can_isr, IRQF_SHARED, dev->name, 1067 dev); 1068 if (err < 0) { 1069 netdev_err(dev, "failed to request interrupt\n"); 1070 goto exit_irq_fail; 1071 } 1072 1073 /* start the c_can controller */ 1074 c_can_start(dev); 1075 1076 napi_enable(&priv->napi); 1077 netif_start_queue(dev); 1078 1079 return 0; 1080 1081exit_irq_fail: 1082 close_candev(dev); 1083 return err; 1084} 1085 1086static int c_can_close(struct net_device *dev) 1087{ 1088 struct c_can_priv *priv = netdev_priv(dev); 1089 1090 netif_stop_queue(dev); 1091 napi_disable(&priv->napi); 1092 c_can_stop(dev); 1093 free_irq(dev->irq, dev); 1094 close_candev(dev); 1095 1096 return 0; 1097} 1098 1099struct net_device *alloc_c_can_dev(void) 1100{ 1101 struct net_device *dev; 1102 struct c_can_priv *priv; 1103 1104 dev = alloc_candev(sizeof(struct c_can_priv), C_CAN_MSG_OBJ_TX_NUM); 1105 if (!dev) 1106 return NULL; 1107 1108 priv = netdev_priv(dev); 1109 netif_napi_add(dev, &priv->napi, c_can_poll, C_CAN_NAPI_WEIGHT); 1110 1111 priv->dev = dev; 1112 priv->can.bittiming_const = &c_can_bittiming_const; 1113 priv->can.do_set_mode = c_can_set_mode; 1114 priv->can.do_get_berr_counter = c_can_get_berr_counter; 1115 priv->can.ctrlmode_supported = CAN_CTRLMODE_ONE_SHOT | 1116 CAN_CTRLMODE_LOOPBACK | 1117 CAN_CTRLMODE_LISTENONLY | 1118 CAN_CTRLMODE_BERR_REPORTING; 1119 1120 return dev; 1121} 1122EXPORT_SYMBOL_GPL(alloc_c_can_dev); 1123 1124void free_c_can_dev(struct net_device *dev) 1125{ 1126 free_candev(dev); 1127} 1128EXPORT_SYMBOL_GPL(free_c_can_dev); 1129 1130static const struct net_device_ops c_can_netdev_ops = { 1131 .ndo_open = c_can_open, 1132 .ndo_stop = c_can_close, 1133 .ndo_start_xmit = c_can_start_xmit, 1134}; 1135 1136int register_c_can_dev(struct net_device *dev) 1137{ 1138 dev->flags |= IFF_ECHO; /* we support local echo */ 1139 dev->netdev_ops = &c_can_netdev_ops; 1140 1141 return register_candev(dev); 1142} 1143EXPORT_SYMBOL_GPL(register_c_can_dev); 1144 1145void unregister_c_can_dev(struct net_device *dev) 1146{ 1147 struct c_can_priv *priv = netdev_priv(dev); 1148 1149 /* disable all interrupts */ 1150 c_can_enable_all_interrupts(priv, DISABLE_ALL_INTERRUPTS); 1151 1152 unregister_candev(dev); 1153} 1154EXPORT_SYMBOL_GPL(unregister_c_can_dev); 1155 1156MODULE_AUTHOR("Bhupesh Sharma <bhupesh.sharma@st.com>"); 1157MODULE_LICENSE("GPL v2"); 1158MODULE_DESCRIPTION("CAN bus driver for Bosch C_CAN controller"); 1159