dev.c revision 156c2bb9f88065c8da78814f98fde665a5cbb527
1/* 2 * Copyright (C) 2005 Marc Kleine-Budde, Pengutronix 3 * Copyright (C) 2006 Andrey Volkov, Varma Electronics 4 * Copyright (C) 2008-2009 Wolfgang Grandegger <wg@grandegger.com> 5 * 6 * This program is free software; you can redistribute it and/or modify 7 * it under the terms of the version 2 of the GNU General Public License 8 * as published by the Free Software Foundation 9 * 10 * This program is distributed in the hope that it will be useful, 11 * but WITHOUT ANY WARRANTY; without even the implied warranty of 12 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 13 * GNU General Public License for more details. 14 * 15 * You should have received a copy of the GNU General Public License 16 * along with this program; if not, write to the Free Software 17 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA 18 */ 19 20#include <linux/module.h> 21#include <linux/kernel.h> 22#include <linux/slab.h> 23#include <linux/netdevice.h> 24#include <linux/if_arp.h> 25#include <linux/can.h> 26#include <linux/can/dev.h> 27#include <linux/can/skb.h> 28#include <linux/can/netlink.h> 29#include <linux/can/led.h> 30#include <net/rtnetlink.h> 31 32#define MOD_DESC "CAN device driver interface" 33 34MODULE_DESCRIPTION(MOD_DESC); 35MODULE_LICENSE("GPL v2"); 36MODULE_AUTHOR("Wolfgang Grandegger <wg@grandegger.com>"); 37 38/* CAN DLC to real data length conversion helpers */ 39 40static const u8 dlc2len[] = {0, 1, 2, 3, 4, 5, 6, 7, 41 8, 12, 16, 20, 24, 32, 48, 64}; 42 43/* get data length from can_dlc with sanitized can_dlc */ 44u8 can_dlc2len(u8 can_dlc) 45{ 46 return dlc2len[can_dlc & 0x0F]; 47} 48EXPORT_SYMBOL_GPL(can_dlc2len); 49 50static const u8 len2dlc[] = {0, 1, 2, 3, 4, 5, 6, 7, 8, /* 0 - 8 */ 51 9, 9, 9, 9, /* 9 - 12 */ 52 10, 10, 10, 10, /* 13 - 16 */ 53 11, 11, 11, 11, /* 17 - 20 */ 54 12, 12, 12, 12, /* 21 - 24 */ 55 13, 13, 13, 13, 13, 13, 13, 13, /* 25 - 32 */ 56 14, 14, 14, 14, 14, 14, 14, 14, /* 33 - 40 */ 57 14, 14, 14, 14, 14, 14, 14, 14, /* 41 - 48 */ 58 15, 15, 15, 15, 15, 15, 15, 15, /* 49 - 56 */ 59 15, 15, 15, 15, 15, 15, 15, 15}; /* 57 - 64 */ 60 61/* map the sanitized data length to an appropriate data length code */ 62u8 can_len2dlc(u8 len) 63{ 64 if (unlikely(len > 64)) 65 return 0xF; 66 67 return len2dlc[len]; 68} 69EXPORT_SYMBOL_GPL(can_len2dlc); 70 71#ifdef CONFIG_CAN_CALC_BITTIMING 72#define CAN_CALC_MAX_ERROR 50 /* in one-tenth of a percent */ 73 74/* 75 * Bit-timing calculation derived from: 76 * 77 * Code based on LinCAN sources and H8S2638 project 78 * Copyright 2004-2006 Pavel Pisa - DCE FELK CVUT cz 79 * Copyright 2005 Stanislav Marek 80 * email: pisa@cmp.felk.cvut.cz 81 * 82 * Calculates proper bit-timing parameters for a specified bit-rate 83 * and sample-point, which can then be used to set the bit-timing 84 * registers of the CAN controller. You can find more information 85 * in the header file linux/can/netlink.h. 86 */ 87static int can_update_spt(const struct can_bittiming_const *btc, 88 int sampl_pt, int tseg, int *tseg1, int *tseg2) 89{ 90 *tseg2 = tseg + 1 - (sampl_pt * (tseg + 1)) / 1000; 91 if (*tseg2 < btc->tseg2_min) 92 *tseg2 = btc->tseg2_min; 93 if (*tseg2 > btc->tseg2_max) 94 *tseg2 = btc->tseg2_max; 95 *tseg1 = tseg - *tseg2; 96 if (*tseg1 > btc->tseg1_max) { 97 *tseg1 = btc->tseg1_max; 98 *tseg2 = tseg - *tseg1; 99 } 100 return 1000 * (tseg + 1 - *tseg2) / (tseg + 1); 101} 102 103static int can_calc_bittiming(struct net_device *dev, struct can_bittiming *bt) 104{ 105 struct can_priv *priv = netdev_priv(dev); 106 const struct can_bittiming_const *btc = priv->bittiming_const; 107 long rate, best_rate = 0; 108 long best_error = 1000000000, error = 0; 109 int best_tseg = 0, best_brp = 0, brp = 0; 110 int tsegall, tseg = 0, tseg1 = 0, tseg2 = 0; 111 int spt_error = 1000, spt = 0, sampl_pt; 112 u64 v64; 113 114 if (!priv->bittiming_const) 115 return -ENOTSUPP; 116 117 /* Use CIA recommended sample points */ 118 if (bt->sample_point) { 119 sampl_pt = bt->sample_point; 120 } else { 121 if (bt->bitrate > 800000) 122 sampl_pt = 750; 123 else if (bt->bitrate > 500000) 124 sampl_pt = 800; 125 else 126 sampl_pt = 875; 127 } 128 129 /* tseg even = round down, odd = round up */ 130 for (tseg = (btc->tseg1_max + btc->tseg2_max) * 2 + 1; 131 tseg >= (btc->tseg1_min + btc->tseg2_min) * 2; tseg--) { 132 tsegall = 1 + tseg / 2; 133 /* Compute all possible tseg choices (tseg=tseg1+tseg2) */ 134 brp = priv->clock.freq / (tsegall * bt->bitrate) + tseg % 2; 135 /* chose brp step which is possible in system */ 136 brp = (brp / btc->brp_inc) * btc->brp_inc; 137 if ((brp < btc->brp_min) || (brp > btc->brp_max)) 138 continue; 139 rate = priv->clock.freq / (brp * tsegall); 140 error = bt->bitrate - rate; 141 /* tseg brp biterror */ 142 if (error < 0) 143 error = -error; 144 if (error > best_error) 145 continue; 146 best_error = error; 147 if (error == 0) { 148 spt = can_update_spt(btc, sampl_pt, tseg / 2, 149 &tseg1, &tseg2); 150 error = sampl_pt - spt; 151 if (error < 0) 152 error = -error; 153 if (error > spt_error) 154 continue; 155 spt_error = error; 156 } 157 best_tseg = tseg / 2; 158 best_brp = brp; 159 best_rate = rate; 160 if (error == 0) 161 break; 162 } 163 164 if (best_error) { 165 /* Error in one-tenth of a percent */ 166 error = (best_error * 1000) / bt->bitrate; 167 if (error > CAN_CALC_MAX_ERROR) { 168 netdev_err(dev, 169 "bitrate error %ld.%ld%% too high\n", 170 error / 10, error % 10); 171 return -EDOM; 172 } else { 173 netdev_warn(dev, "bitrate error %ld.%ld%%\n", 174 error / 10, error % 10); 175 } 176 } 177 178 /* real sample point */ 179 bt->sample_point = can_update_spt(btc, sampl_pt, best_tseg, 180 &tseg1, &tseg2); 181 182 v64 = (u64)best_brp * 1000000000UL; 183 do_div(v64, priv->clock.freq); 184 bt->tq = (u32)v64; 185 bt->prop_seg = tseg1 / 2; 186 bt->phase_seg1 = tseg1 - bt->prop_seg; 187 bt->phase_seg2 = tseg2; 188 189 /* check for sjw user settings */ 190 if (!bt->sjw || !btc->sjw_max) 191 bt->sjw = 1; 192 else { 193 /* bt->sjw is at least 1 -> sanitize upper bound to sjw_max */ 194 if (bt->sjw > btc->sjw_max) 195 bt->sjw = btc->sjw_max; 196 /* bt->sjw must not be higher than tseg2 */ 197 if (tseg2 < bt->sjw) 198 bt->sjw = tseg2; 199 } 200 201 bt->brp = best_brp; 202 /* real bit-rate */ 203 bt->bitrate = priv->clock.freq / (bt->brp * (tseg1 + tseg2 + 1)); 204 205 return 0; 206} 207#else /* !CONFIG_CAN_CALC_BITTIMING */ 208static int can_calc_bittiming(struct net_device *dev, struct can_bittiming *bt) 209{ 210 netdev_err(dev, "bit-timing calculation not available\n"); 211 return -EINVAL; 212} 213#endif /* CONFIG_CAN_CALC_BITTIMING */ 214 215/* 216 * Checks the validity of the specified bit-timing parameters prop_seg, 217 * phase_seg1, phase_seg2 and sjw and tries to determine the bitrate 218 * prescaler value brp. You can find more information in the header 219 * file linux/can/netlink.h. 220 */ 221static int can_fixup_bittiming(struct net_device *dev, struct can_bittiming *bt) 222{ 223 struct can_priv *priv = netdev_priv(dev); 224 const struct can_bittiming_const *btc = priv->bittiming_const; 225 int tseg1, alltseg; 226 u64 brp64; 227 228 if (!priv->bittiming_const) 229 return -ENOTSUPP; 230 231 tseg1 = bt->prop_seg + bt->phase_seg1; 232 if (!bt->sjw) 233 bt->sjw = 1; 234 if (bt->sjw > btc->sjw_max || 235 tseg1 < btc->tseg1_min || tseg1 > btc->tseg1_max || 236 bt->phase_seg2 < btc->tseg2_min || bt->phase_seg2 > btc->tseg2_max) 237 return -ERANGE; 238 239 brp64 = (u64)priv->clock.freq * (u64)bt->tq; 240 if (btc->brp_inc > 1) 241 do_div(brp64, btc->brp_inc); 242 brp64 += 500000000UL - 1; 243 do_div(brp64, 1000000000UL); /* the practicable BRP */ 244 if (btc->brp_inc > 1) 245 brp64 *= btc->brp_inc; 246 bt->brp = (u32)brp64; 247 248 if (bt->brp < btc->brp_min || bt->brp > btc->brp_max) 249 return -EINVAL; 250 251 alltseg = bt->prop_seg + bt->phase_seg1 + bt->phase_seg2 + 1; 252 bt->bitrate = priv->clock.freq / (bt->brp * alltseg); 253 bt->sample_point = ((tseg1 + 1) * 1000) / alltseg; 254 255 return 0; 256} 257 258static int can_get_bittiming(struct net_device *dev, struct can_bittiming *bt) 259{ 260 struct can_priv *priv = netdev_priv(dev); 261 int err; 262 263 /* Check if the CAN device has bit-timing parameters */ 264 if (priv->bittiming_const) { 265 266 /* Non-expert mode? Check if the bitrate has been pre-defined */ 267 if (!bt->tq) 268 /* Determine bit-timing parameters */ 269 err = can_calc_bittiming(dev, bt); 270 else 271 /* Check bit-timing params and calculate proper brp */ 272 err = can_fixup_bittiming(dev, bt); 273 if (err) 274 return err; 275 } 276 277 return 0; 278} 279 280/* 281 * Local echo of CAN messages 282 * 283 * CAN network devices *should* support a local echo functionality 284 * (see Documentation/networking/can.txt). To test the handling of CAN 285 * interfaces that do not support the local echo both driver types are 286 * implemented. In the case that the driver does not support the echo 287 * the IFF_ECHO remains clear in dev->flags. This causes the PF_CAN core 288 * to perform the echo as a fallback solution. 289 */ 290static void can_flush_echo_skb(struct net_device *dev) 291{ 292 struct can_priv *priv = netdev_priv(dev); 293 struct net_device_stats *stats = &dev->stats; 294 int i; 295 296 for (i = 0; i < priv->echo_skb_max; i++) { 297 if (priv->echo_skb[i]) { 298 kfree_skb(priv->echo_skb[i]); 299 priv->echo_skb[i] = NULL; 300 stats->tx_dropped++; 301 stats->tx_aborted_errors++; 302 } 303 } 304} 305 306/* 307 * Put the skb on the stack to be looped backed locally lateron 308 * 309 * The function is typically called in the start_xmit function 310 * of the device driver. The driver must protect access to 311 * priv->echo_skb, if necessary. 312 */ 313void can_put_echo_skb(struct sk_buff *skb, struct net_device *dev, 314 unsigned int idx) 315{ 316 struct can_priv *priv = netdev_priv(dev); 317 318 BUG_ON(idx >= priv->echo_skb_max); 319 320 /* check flag whether this packet has to be looped back */ 321 if (!(dev->flags & IFF_ECHO) || skb->pkt_type != PACKET_LOOPBACK) { 322 kfree_skb(skb); 323 return; 324 } 325 326 if (!priv->echo_skb[idx]) { 327 struct sock *srcsk = skb->sk; 328 329 if (atomic_read(&skb->users) != 1) { 330 struct sk_buff *old_skb = skb; 331 332 skb = skb_clone(old_skb, GFP_ATOMIC); 333 kfree_skb(old_skb); 334 if (!skb) 335 return; 336 } else 337 skb_orphan(skb); 338 339 skb->sk = srcsk; 340 341 /* make settings for echo to reduce code in irq context */ 342 skb->protocol = htons(ETH_P_CAN); 343 skb->pkt_type = PACKET_BROADCAST; 344 skb->ip_summed = CHECKSUM_UNNECESSARY; 345 skb->dev = dev; 346 347 /* save this skb for tx interrupt echo handling */ 348 priv->echo_skb[idx] = skb; 349 } else { 350 /* locking problem with netif_stop_queue() ?? */ 351 netdev_err(dev, "%s: BUG! echo_skb is occupied!\n", __func__); 352 kfree_skb(skb); 353 } 354} 355EXPORT_SYMBOL_GPL(can_put_echo_skb); 356 357/* 358 * Get the skb from the stack and loop it back locally 359 * 360 * The function is typically called when the TX done interrupt 361 * is handled in the device driver. The driver must protect 362 * access to priv->echo_skb, if necessary. 363 */ 364unsigned int can_get_echo_skb(struct net_device *dev, unsigned int idx) 365{ 366 struct can_priv *priv = netdev_priv(dev); 367 368 BUG_ON(idx >= priv->echo_skb_max); 369 370 if (priv->echo_skb[idx]) { 371 struct sk_buff *skb = priv->echo_skb[idx]; 372 struct can_frame *cf = (struct can_frame *)skb->data; 373 u8 dlc = cf->can_dlc; 374 375 netif_rx(priv->echo_skb[idx]); 376 priv->echo_skb[idx] = NULL; 377 378 return dlc; 379 } 380 381 return 0; 382} 383EXPORT_SYMBOL_GPL(can_get_echo_skb); 384 385/* 386 * Remove the skb from the stack and free it. 387 * 388 * The function is typically called when TX failed. 389 */ 390void can_free_echo_skb(struct net_device *dev, unsigned int idx) 391{ 392 struct can_priv *priv = netdev_priv(dev); 393 394 BUG_ON(idx >= priv->echo_skb_max); 395 396 if (priv->echo_skb[idx]) { 397 kfree_skb(priv->echo_skb[idx]); 398 priv->echo_skb[idx] = NULL; 399 } 400} 401EXPORT_SYMBOL_GPL(can_free_echo_skb); 402 403/* 404 * CAN device restart for bus-off recovery 405 */ 406static void can_restart(unsigned long data) 407{ 408 struct net_device *dev = (struct net_device *)data; 409 struct can_priv *priv = netdev_priv(dev); 410 struct net_device_stats *stats = &dev->stats; 411 struct sk_buff *skb; 412 struct can_frame *cf; 413 int err; 414 415 BUG_ON(netif_carrier_ok(dev)); 416 417 /* 418 * No synchronization needed because the device is bus-off and 419 * no messages can come in or go out. 420 */ 421 can_flush_echo_skb(dev); 422 423 /* send restart message upstream */ 424 skb = alloc_can_err_skb(dev, &cf); 425 if (skb == NULL) { 426 err = -ENOMEM; 427 goto restart; 428 } 429 cf->can_id |= CAN_ERR_RESTARTED; 430 431 netif_rx(skb); 432 433 stats->rx_packets++; 434 stats->rx_bytes += cf->can_dlc; 435 436restart: 437 netdev_dbg(dev, "restarted\n"); 438 priv->can_stats.restarts++; 439 440 /* Now restart the device */ 441 err = priv->do_set_mode(dev, CAN_MODE_START); 442 443 netif_carrier_on(dev); 444 if (err) 445 netdev_err(dev, "Error %d during restart", err); 446} 447 448int can_restart_now(struct net_device *dev) 449{ 450 struct can_priv *priv = netdev_priv(dev); 451 452 /* 453 * A manual restart is only permitted if automatic restart is 454 * disabled and the device is in the bus-off state 455 */ 456 if (priv->restart_ms) 457 return -EINVAL; 458 if (priv->state != CAN_STATE_BUS_OFF) 459 return -EBUSY; 460 461 /* Runs as soon as possible in the timer context */ 462 mod_timer(&priv->restart_timer, jiffies); 463 464 return 0; 465} 466 467/* 468 * CAN bus-off 469 * 470 * This functions should be called when the device goes bus-off to 471 * tell the netif layer that no more packets can be sent or received. 472 * If enabled, a timer is started to trigger bus-off recovery. 473 */ 474void can_bus_off(struct net_device *dev) 475{ 476 struct can_priv *priv = netdev_priv(dev); 477 478 netdev_dbg(dev, "bus-off\n"); 479 480 netif_carrier_off(dev); 481 priv->can_stats.bus_off++; 482 483 if (priv->restart_ms) 484 mod_timer(&priv->restart_timer, 485 jiffies + (priv->restart_ms * HZ) / 1000); 486} 487EXPORT_SYMBOL_GPL(can_bus_off); 488 489static void can_setup(struct net_device *dev) 490{ 491 dev->type = ARPHRD_CAN; 492 dev->mtu = CAN_MTU; 493 dev->hard_header_len = 0; 494 dev->addr_len = 0; 495 dev->tx_queue_len = 10; 496 497 /* New-style flags. */ 498 dev->flags = IFF_NOARP; 499 dev->features = NETIF_F_HW_CSUM; 500} 501 502struct sk_buff *alloc_can_skb(struct net_device *dev, struct can_frame **cf) 503{ 504 struct sk_buff *skb; 505 506 skb = netdev_alloc_skb(dev, sizeof(struct can_skb_priv) + 507 sizeof(struct can_frame)); 508 if (unlikely(!skb)) 509 return NULL; 510 511 skb->protocol = htons(ETH_P_CAN); 512 skb->pkt_type = PACKET_BROADCAST; 513 skb->ip_summed = CHECKSUM_UNNECESSARY; 514 515 skb_reserve(skb, sizeof(struct can_skb_priv)); 516 ((struct can_skb_priv *)(skb->head))->ifindex = dev->ifindex; 517 518 *cf = (struct can_frame *)skb_put(skb, sizeof(struct can_frame)); 519 memset(*cf, 0, sizeof(struct can_frame)); 520 521 return skb; 522} 523EXPORT_SYMBOL_GPL(alloc_can_skb); 524 525struct sk_buff *alloc_can_err_skb(struct net_device *dev, struct can_frame **cf) 526{ 527 struct sk_buff *skb; 528 529 skb = alloc_can_skb(dev, cf); 530 if (unlikely(!skb)) 531 return NULL; 532 533 (*cf)->can_id = CAN_ERR_FLAG; 534 (*cf)->can_dlc = CAN_ERR_DLC; 535 536 return skb; 537} 538EXPORT_SYMBOL_GPL(alloc_can_err_skb); 539 540/* 541 * Allocate and setup space for the CAN network device 542 */ 543struct net_device *alloc_candev(int sizeof_priv, unsigned int echo_skb_max) 544{ 545 struct net_device *dev; 546 struct can_priv *priv; 547 int size; 548 549 if (echo_skb_max) 550 size = ALIGN(sizeof_priv, sizeof(struct sk_buff *)) + 551 echo_skb_max * sizeof(struct sk_buff *); 552 else 553 size = sizeof_priv; 554 555 dev = alloc_netdev(size, "can%d", can_setup); 556 if (!dev) 557 return NULL; 558 559 priv = netdev_priv(dev); 560 561 if (echo_skb_max) { 562 priv->echo_skb_max = echo_skb_max; 563 priv->echo_skb = (void *)priv + 564 ALIGN(sizeof_priv, sizeof(struct sk_buff *)); 565 } 566 567 priv->state = CAN_STATE_STOPPED; 568 569 init_timer(&priv->restart_timer); 570 571 return dev; 572} 573EXPORT_SYMBOL_GPL(alloc_candev); 574 575/* 576 * Free space of the CAN network device 577 */ 578void free_candev(struct net_device *dev) 579{ 580 free_netdev(dev); 581} 582EXPORT_SYMBOL_GPL(free_candev); 583 584/* 585 * Common open function when the device gets opened. 586 * 587 * This function should be called in the open function of the device 588 * driver. 589 */ 590int open_candev(struct net_device *dev) 591{ 592 struct can_priv *priv = netdev_priv(dev); 593 594 if (!priv->bittiming.tq && !priv->bittiming.bitrate) { 595 netdev_err(dev, "bit-timing not yet defined\n"); 596 return -EINVAL; 597 } 598 599 /* Switch carrier on if device was stopped while in bus-off state */ 600 if (!netif_carrier_ok(dev)) 601 netif_carrier_on(dev); 602 603 setup_timer(&priv->restart_timer, can_restart, (unsigned long)dev); 604 605 return 0; 606} 607EXPORT_SYMBOL_GPL(open_candev); 608 609/* 610 * Common close function for cleanup before the device gets closed. 611 * 612 * This function should be called in the close function of the device 613 * driver. 614 */ 615void close_candev(struct net_device *dev) 616{ 617 struct can_priv *priv = netdev_priv(dev); 618 619 del_timer_sync(&priv->restart_timer); 620 can_flush_echo_skb(dev); 621} 622EXPORT_SYMBOL_GPL(close_candev); 623 624/* 625 * CAN netlink interface 626 */ 627static const struct nla_policy can_policy[IFLA_CAN_MAX + 1] = { 628 [IFLA_CAN_STATE] = { .type = NLA_U32 }, 629 [IFLA_CAN_CTRLMODE] = { .len = sizeof(struct can_ctrlmode) }, 630 [IFLA_CAN_RESTART_MS] = { .type = NLA_U32 }, 631 [IFLA_CAN_RESTART] = { .type = NLA_U32 }, 632 [IFLA_CAN_BITTIMING] = { .len = sizeof(struct can_bittiming) }, 633 [IFLA_CAN_BITTIMING_CONST] 634 = { .len = sizeof(struct can_bittiming_const) }, 635 [IFLA_CAN_CLOCK] = { .len = sizeof(struct can_clock) }, 636 [IFLA_CAN_BERR_COUNTER] = { .len = sizeof(struct can_berr_counter) }, 637}; 638 639static int can_changelink(struct net_device *dev, 640 struct nlattr *tb[], struct nlattr *data[]) 641{ 642 struct can_priv *priv = netdev_priv(dev); 643 int err; 644 645 /* We need synchronization with dev->stop() */ 646 ASSERT_RTNL(); 647 648 if (data[IFLA_CAN_CTRLMODE]) { 649 struct can_ctrlmode *cm; 650 651 /* Do not allow changing controller mode while running */ 652 if (dev->flags & IFF_UP) 653 return -EBUSY; 654 cm = nla_data(data[IFLA_CAN_CTRLMODE]); 655 if (cm->flags & ~priv->ctrlmode_supported) 656 return -EOPNOTSUPP; 657 priv->ctrlmode &= ~cm->mask; 658 priv->ctrlmode |= cm->flags; 659 } 660 661 if (data[IFLA_CAN_BITTIMING]) { 662 struct can_bittiming bt; 663 664 /* Do not allow changing bittiming while running */ 665 if (dev->flags & IFF_UP) 666 return -EBUSY; 667 memcpy(&bt, nla_data(data[IFLA_CAN_BITTIMING]), sizeof(bt)); 668 if ((!bt.bitrate && !bt.tq) || (bt.bitrate && bt.tq)) 669 return -EINVAL; 670 err = can_get_bittiming(dev, &bt); 671 if (err) 672 return err; 673 memcpy(&priv->bittiming, &bt, sizeof(bt)); 674 675 if (priv->do_set_bittiming) { 676 /* Finally, set the bit-timing registers */ 677 err = priv->do_set_bittiming(dev); 678 if (err) 679 return err; 680 } 681 } 682 683 if (data[IFLA_CAN_RESTART_MS]) { 684 /* Do not allow changing restart delay while running */ 685 if (dev->flags & IFF_UP) 686 return -EBUSY; 687 priv->restart_ms = nla_get_u32(data[IFLA_CAN_RESTART_MS]); 688 } 689 690 if (data[IFLA_CAN_RESTART]) { 691 /* Do not allow a restart while not running */ 692 if (!(dev->flags & IFF_UP)) 693 return -EINVAL; 694 err = can_restart_now(dev); 695 if (err) 696 return err; 697 } 698 699 return 0; 700} 701 702static size_t can_get_size(const struct net_device *dev) 703{ 704 struct can_priv *priv = netdev_priv(dev); 705 size_t size; 706 707 size = nla_total_size(sizeof(u32)); /* IFLA_CAN_STATE */ 708 size += sizeof(struct can_ctrlmode); /* IFLA_CAN_CTRLMODE */ 709 size += nla_total_size(sizeof(u32)); /* IFLA_CAN_RESTART_MS */ 710 size += sizeof(struct can_bittiming); /* IFLA_CAN_BITTIMING */ 711 size += sizeof(struct can_clock); /* IFLA_CAN_CLOCK */ 712 if (priv->do_get_berr_counter) /* IFLA_CAN_BERR_COUNTER */ 713 size += sizeof(struct can_berr_counter); 714 if (priv->bittiming_const) /* IFLA_CAN_BITTIMING_CONST */ 715 size += sizeof(struct can_bittiming_const); 716 717 return size; 718} 719 720static int can_fill_info(struct sk_buff *skb, const struct net_device *dev) 721{ 722 struct can_priv *priv = netdev_priv(dev); 723 struct can_ctrlmode cm = {.flags = priv->ctrlmode}; 724 struct can_berr_counter bec; 725 enum can_state state = priv->state; 726 727 if (priv->do_get_state) 728 priv->do_get_state(dev, &state); 729 if (nla_put_u32(skb, IFLA_CAN_STATE, state) || 730 nla_put(skb, IFLA_CAN_CTRLMODE, sizeof(cm), &cm) || 731 nla_put_u32(skb, IFLA_CAN_RESTART_MS, priv->restart_ms) || 732 nla_put(skb, IFLA_CAN_BITTIMING, 733 sizeof(priv->bittiming), &priv->bittiming) || 734 nla_put(skb, IFLA_CAN_CLOCK, sizeof(cm), &priv->clock) || 735 (priv->do_get_berr_counter && 736 !priv->do_get_berr_counter(dev, &bec) && 737 nla_put(skb, IFLA_CAN_BERR_COUNTER, sizeof(bec), &bec)) || 738 (priv->bittiming_const && 739 nla_put(skb, IFLA_CAN_BITTIMING_CONST, 740 sizeof(*priv->bittiming_const), priv->bittiming_const))) 741 goto nla_put_failure; 742 return 0; 743 744nla_put_failure: 745 return -EMSGSIZE; 746} 747 748static size_t can_get_xstats_size(const struct net_device *dev) 749{ 750 return sizeof(struct can_device_stats); 751} 752 753static int can_fill_xstats(struct sk_buff *skb, const struct net_device *dev) 754{ 755 struct can_priv *priv = netdev_priv(dev); 756 757 if (nla_put(skb, IFLA_INFO_XSTATS, 758 sizeof(priv->can_stats), &priv->can_stats)) 759 goto nla_put_failure; 760 return 0; 761 762nla_put_failure: 763 return -EMSGSIZE; 764} 765 766static int can_newlink(struct net *src_net, struct net_device *dev, 767 struct nlattr *tb[], struct nlattr *data[]) 768{ 769 return -EOPNOTSUPP; 770} 771 772static struct rtnl_link_ops can_link_ops __read_mostly = { 773 .kind = "can", 774 .maxtype = IFLA_CAN_MAX, 775 .policy = can_policy, 776 .setup = can_setup, 777 .newlink = can_newlink, 778 .changelink = can_changelink, 779 .get_size = can_get_size, 780 .fill_info = can_fill_info, 781 .get_xstats_size = can_get_xstats_size, 782 .fill_xstats = can_fill_xstats, 783}; 784 785/* 786 * Register the CAN network device 787 */ 788int register_candev(struct net_device *dev) 789{ 790 dev->rtnl_link_ops = &can_link_ops; 791 return register_netdev(dev); 792} 793EXPORT_SYMBOL_GPL(register_candev); 794 795/* 796 * Unregister the CAN network device 797 */ 798void unregister_candev(struct net_device *dev) 799{ 800 unregister_netdev(dev); 801} 802EXPORT_SYMBOL_GPL(unregister_candev); 803 804/* 805 * Test if a network device is a candev based device 806 * and return the can_priv* if so. 807 */ 808struct can_priv *safe_candev_priv(struct net_device *dev) 809{ 810 if ((dev->type != ARPHRD_CAN) || (dev->rtnl_link_ops != &can_link_ops)) 811 return NULL; 812 813 return netdev_priv(dev); 814} 815EXPORT_SYMBOL_GPL(safe_candev_priv); 816 817static __init int can_dev_init(void) 818{ 819 int err; 820 821 can_led_notifier_init(); 822 823 err = rtnl_link_register(&can_link_ops); 824 if (!err) 825 printk(KERN_INFO MOD_DESC "\n"); 826 827 return err; 828} 829module_init(can_dev_init); 830 831static __exit void can_dev_exit(void) 832{ 833 rtnl_link_unregister(&can_link_ops); 834 835 can_led_notifier_exit(); 836} 837module_exit(can_dev_exit); 838 839MODULE_ALIAS_RTNL_LINK("can"); 840