Kconfig revision 02729c3d08c9334d03d61d365ff2408514a46c81
1menuconfig CAN_SJA1000 2 tristate "Philips/NXP SJA1000 devices" 3 depends on HAS_IOMEM 4 5if CAN_SJA1000 6 7config CAN_SJA1000_ISA 8 tristate "ISA Bus based legacy SJA1000 driver" 9 ---help--- 10 This driver adds legacy support for SJA1000 chips connected to 11 the ISA bus using I/O port, memory mapped or indirect access. 12 13config CAN_SJA1000_PLATFORM 14 tristate "Generic Platform Bus based SJA1000 driver" 15 ---help--- 16 This driver adds support for the SJA1000 chips connected to 17 the "platform bus" (Linux abstraction for directly to the 18 processor attached devices). Which can be found on various 19 boards from Phytec (http://www.phytec.de) like the PCM027, 20 PCM038. It also provides the OpenFirmware "platform bus" found 21 on embedded systems with OpenFirmware bindings, e.g. if you 22 have a PowerPC based system you may want to enable this option. 23 24config CAN_EMS_PCMCIA 25 tristate "EMS CPC-CARD Card" 26 depends on PCMCIA 27 ---help--- 28 This driver is for the one or two channel CPC-CARD cards from 29 EMS Dr. Thomas Wuensche (http://www.ems-wuensche.de). 30 31config CAN_EMS_PCI 32 tristate "EMS CPC-PCI, CPC-PCIe and CPC-104P Card" 33 depends on PCI 34 ---help--- 35 This driver is for the one, two or four channel CPC-PCI, 36 CPC-PCIe and CPC-104P cards from EMS Dr. Thomas Wuensche 37 (http://www.ems-wuensche.de). 38 39config CAN_PEAK_PCMCIA 40 tristate "PEAK PCAN-PC Card" 41 depends on PCMCIA 42 depends on HAS_IOPORT 43 ---help--- 44 This driver is for the PCAN-PC Card PCMCIA adapter (1 or 2 channels) 45 from PEAK-System (http://www.peak-system.com). To compile this 46 driver as a module, choose M here: the module will be called 47 peak_pcmcia. 48 49config CAN_PEAK_PCI 50 tristate "PEAK PCAN-PCI/PCIe/miniPCI Cards" 51 depends on PCI 52 ---help--- 53 This driver is for the PCAN-PCI/PCIe/miniPCI cards 54 (1, 2, 3 or 4 channels) from PEAK-System Technik 55 (http://www.peak-system.com). 56 57config CAN_PEAK_PCIEC 58 bool "PEAK PCAN-ExpressCard Cards" 59 depends on CAN_PEAK_PCI 60 select I2C 61 select I2C_ALGOBIT 62 default y 63 ---help--- 64 Say Y here if you want to use a PCAN-ExpressCard from PEAK-System 65 Technik. This will also automatically select I2C and I2C_ALGO 66 configuration options. 67 68config CAN_KVASER_PCI 69 tristate "Kvaser PCIcanx and Kvaser PCIcan PCI Cards" 70 depends on PCI 71 ---help--- 72 This driver is for the PCIcanx and PCIcan cards (1, 2 or 73 4 channel) from Kvaser (http://www.kvaser.com). 74 75config CAN_PLX_PCI 76 tristate "PLX90xx PCI-bridge based Cards" 77 depends on PCI 78 ---help--- 79 This driver is for CAN interface cards based on 80 the PLX90xx PCI bridge. 81 Driver supports now: 82 - Adlink PCI-7841/cPCI-7841 card (http://www.adlinktech.com/) 83 - Adlink PCI-7841/cPCI-7841 SE card 84 - esd CAN-PCI/CPCI/PCI104/200 (http://www.esd.eu/) 85 - esd CAN-PCI/PMC/266 86 - esd CAN-PCIe/2000 87 - Marathon CAN-bus-PCI card (http://www.marathon.ru/) 88 - TEWS TECHNOLOGIES TPMC810 card (http://www.tews.com/) 89 - IXXAT Automation PC-I 04/PCI card (http://www.ixxat.com/) 90 - Connect Tech Inc. CANpro/104-Plus Opto (CRG001) card (http://www.connecttech.com) 91 92config CAN_TSCAN1 93 tristate "TS-CAN1 PC104 boards" 94 depends on ISA 95 help 96 This driver is for Technologic Systems' TSCAN-1 PC104 boards. 97 http://www.embeddedarm.com/products/board-detail.php?product=TS-CAN1 98 The driver supports multiple boards and automatically configures them: 99 PLD IO base addresses are read from jumpers JP1 and JP2, 100 IRQ numbers are read from jumpers JP4 and JP5, 101 SJA1000 IO base addresses are chosen heuristically (first that works). 102 103endif 104