Kconfig revision fd734c6f25aea4b2b44b045e489aec67b388577e 
1menuconfig CAN_SJA1000
2	tristate "Philips/NXP SJA1000 devices"
3	depends on CAN_DEV && HAS_IOMEM
4
5if CAN_SJA1000
6
7config CAN_SJA1000_ISA
8	tristate "ISA Bus based legacy SJA1000 driver"
9	depends on ISA
10	---help---
11	  This driver adds legacy support for SJA1000 chips connected to
12	  the ISA bus using I/O port, memory mapped or indirect access.
13
14config CAN_SJA1000_PLATFORM
15	tristate "Generic Platform Bus based SJA1000 driver"
16	---help---
17	  This driver adds support for the SJA1000 chips connected to
18	  the "platform bus" (Linux abstraction for directly to the
19	  processor attached devices).  Which can be found on various
20	  boards from Phytec (http://www.phytec.de) like the PCM027,
21	  PCM038.
22
23config CAN_SJA1000_OF_PLATFORM
24	tristate "Generic OF Platform Bus based SJA1000 driver"
25	depends on PPC_OF
26	---help---
27	  This driver adds support for the SJA1000 chips connected to
28	  the OpenFirmware "platform bus" found on embedded systems with
29	  OpenFirmware bindings, e.g. if you have a PowerPC based system
30	  you may want to enable this option.
31
32config CAN_EMS_PCMCIA
33	tristate "EMS CPC-CARD Card"
34	depends on PCMCIA
35	---help---
36	  This driver is for the one or two channel CPC-CARD cards from
37	  EMS Dr. Thomas Wuensche (http://www.ems-wuensche.de).
38
39config CAN_EMS_PCI
40	tristate "EMS CPC-PCI, CPC-PCIe and CPC-104P Card"
41	depends on PCI
42	---help---
43	  This driver is for the one, two or four channel CPC-PCI,
44	  CPC-PCIe and CPC-104P cards from EMS Dr. Thomas Wuensche
45	  (http://www.ems-wuensche.de).
46
47config CAN_PEAK_PCI
48	tristate "PEAK PCAN PCI/PCIe Cards"
49	depends on PCI
50	---help---
51	  This driver is for the PCAN PCI/PCIe cards (1, 2, 3 or 4 channels)
52	  from PEAK Systems (http://www.peak-system.com).
53
54config CAN_KVASER_PCI
55	tristate "Kvaser PCIcanx and Kvaser PCIcan PCI Cards"
56	depends on PCI
57	---help---
58	  This driver is for the the PCIcanx and PCIcan cards (1, 2 or
59	  4 channel) from Kvaser (http://www.kvaser.com).
60
61config CAN_PLX_PCI
62	tristate "PLX90xx PCI-bridge based Cards"
63	depends on PCI
64	---help---
65	  This driver is for CAN interface cards based on
66	  the PLX90xx PCI bridge.
67	  Driver supports now:
68	   - Adlink PCI-7841/cPCI-7841 card (http://www.adlinktech.com/)
69	   - Adlink PCI-7841/cPCI-7841 SE card
70	   - esd CAN-PCI/CPCI/PCI104/200 (http://www.esd.eu/)
71	   - esd CAN-PCI/PMC/266
72	   - esd CAN-PCIe/2000
73	   - Marathon CAN-bus-PCI card (http://www.marathon.ru/)
74	   - TEWS TECHNOLOGIES TPMC810 card (http://www.tews.com/)
75
76config CAN_TSCAN1
77	tristate "TS-CAN1 PC104 boards"
78	depends on ISA
79	help
80	This driver is for Technologic Systems' TSCAN-1 PC104 boards.
81	http://www.embeddedarm.com/products/board-detail.php?product=TS-CAN1
82	The driver supports multiple boards and automatically configures them:
83	PLD IO base addresses are read from jumpers JP1 and JP2,
84	IRQ numbers are read from jumpers JP4 and JP5,
85	SJA1000 IO base addresses are chosen heuristically (first that works).
86
87endif
88