plx_pci.c revision e4bc6c06569a90512169d98a11b3eb2ec18da4ae
1/* 2 * Copyright (C) 2008-2010 Pavel Cheblakov <P.B.Cheblakov@inp.nsk.su> 3 * 4 * Derived from the ems_pci.c driver: 5 * Copyright (C) 2007 Wolfgang Grandegger <wg@grandegger.com> 6 * Copyright (C) 2008 Markus Plessing <plessing@ems-wuensche.com> 7 * Copyright (C) 2008 Sebastian Haas <haas@ems-wuensche.com> 8 * 9 * This program is free software; you can redistribute it and/or modify 10 * it under the terms of the version 2 of the GNU General Public License 11 * as published by the Free Software Foundation 12 * 13 * This program is distributed in the hope that it will be useful, 14 * but WITHOUT ANY WARRANTY; without even the implied warranty of 15 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 16 * GNU General Public License for more details. 17 * 18 * You should have received a copy of the GNU General Public License 19 * along with this program; if not, write to the Free Software Foundation, 20 * Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. 21 */ 22 23#include <linux/kernel.h> 24#include <linux/module.h> 25#include <linux/interrupt.h> 26#include <linux/netdevice.h> 27#include <linux/delay.h> 28#include <linux/slab.h> 29#include <linux/pci.h> 30#include <linux/can/dev.h> 31#include <linux/io.h> 32 33#include "sja1000.h" 34 35#define DRV_NAME "sja1000_plx_pci" 36 37MODULE_AUTHOR("Pavel Cheblakov <P.B.Cheblakov@inp.nsk.su>"); 38MODULE_DESCRIPTION("Socket-CAN driver for PLX90xx PCI-bridge cards with " 39 "the SJA1000 chips"); 40MODULE_SUPPORTED_DEVICE("Adlink PCI-7841/cPCI-7841, " 41 "Adlink PCI-7841/cPCI-7841 SE, " 42 "Marathon CAN-bus-PCI, " 43 "TEWS TECHNOLOGIES TPMC810, " 44 "esd CAN-PCI/CPCI/PCI104/200, " 45 "esd CAN-PCI/PMC/266, " 46 "esd CAN-PCIe/2000, " 47 "Connect Tech Inc. CANpro/104-Plus Opto (CRG001), " 48 "IXXAT PC-I 04/PCI") 49MODULE_LICENSE("GPL v2"); 50 51#define PLX_PCI_MAX_CHAN 2 52 53struct plx_pci_card { 54 int channels; /* detected channels count */ 55 struct net_device *net_dev[PLX_PCI_MAX_CHAN]; 56 void __iomem *conf_addr; 57 58 /* Pointer to device-dependent reset function */ 59 void (*reset_func)(struct pci_dev *pdev); 60}; 61 62#define PLX_PCI_CAN_CLOCK (16000000 / 2) 63 64/* PLX9030/9050/9052 registers */ 65#define PLX_INTCSR 0x4c /* Interrupt Control/Status */ 66#define PLX_CNTRL 0x50 /* User I/O, Direct Slave Response, 67 * Serial EEPROM, and Initialization 68 * Control register 69 */ 70 71#define PLX_LINT1_EN 0x1 /* Local interrupt 1 enable */ 72#define PLX_LINT2_EN (1 << 3) /* Local interrupt 2 enable */ 73#define PLX_PCI_INT_EN (1 << 6) /* PCI Interrupt Enable */ 74#define PLX_PCI_RESET (1 << 30) /* PCI Adapter Software Reset */ 75 76/* PLX9056 registers */ 77#define PLX9056_INTCSR 0x68 /* Interrupt Control/Status */ 78#define PLX9056_CNTRL 0x6c /* Control / Software Reset */ 79 80#define PLX9056_LINTI (1 << 11) 81#define PLX9056_PCI_INT_EN (1 << 8) 82#define PLX9056_PCI_RCR (1 << 29) /* Read Configuration Registers */ 83 84/* 85 * The board configuration is probably following: 86 * RX1 is connected to ground. 87 * TX1 is not connected. 88 * CLKO is not connected. 89 * Setting the OCR register to 0xDA is a good idea. 90 * This means normal output mode, push-pull and the correct polarity. 91 */ 92#define PLX_PCI_OCR (OCR_TX0_PUSHPULL | OCR_TX1_PUSHPULL) 93 94/* 95 * In the CDR register, you should set CBP to 1. 96 * You will probably also want to set the clock divider value to 7 97 * (meaning direct oscillator output) because the second SJA1000 chip 98 * is driven by the first one CLKOUT output. 99 */ 100#define PLX_PCI_CDR (CDR_CBP | CDR_CLKOUT_MASK) 101 102/* SJA1000 Control Register in the BasicCAN Mode */ 103#define REG_CR 0x00 104 105/* States of some SJA1000 registers after hardware reset in the BasicCAN mode*/ 106#define REG_CR_BASICCAN_INITIAL 0x21 107#define REG_CR_BASICCAN_INITIAL_MASK 0xa1 108#define REG_SR_BASICCAN_INITIAL 0x0c 109#define REG_IR_BASICCAN_INITIAL 0xe0 110 111/* States of some SJA1000 registers after hardware reset in the PeliCAN mode*/ 112#define REG_MOD_PELICAN_INITIAL 0x01 113#define REG_SR_PELICAN_INITIAL 0x3c 114#define REG_IR_PELICAN_INITIAL 0x00 115 116#define ADLINK_PCI_VENDOR_ID 0x144A 117#define ADLINK_PCI_DEVICE_ID 0x7841 118 119#define ESD_PCI_SUB_SYS_ID_PCI200 0x0004 120#define ESD_PCI_SUB_SYS_ID_PCI266 0x0009 121#define ESD_PCI_SUB_SYS_ID_PMC266 0x000e 122#define ESD_PCI_SUB_SYS_ID_CPCI200 0x010b 123#define ESD_PCI_SUB_SYS_ID_PCIE2000 0x0200 124#define ESD_PCI_SUB_SYS_ID_PCI104200 0x0501 125 126#define IXXAT_PCI_VENDOR_ID 0x10b5 127#define IXXAT_PCI_DEVICE_ID 0x9050 128#define IXXAT_PCI_SUB_SYS_ID 0x2540 129 130#define MARATHON_PCI_DEVICE_ID 0x2715 131 132#define TEWS_PCI_VENDOR_ID 0x1498 133#define TEWS_PCI_DEVICE_ID_TMPC810 0x032A 134 135#define CTI_PCI_VENDOR_ID 0x12c4 136#define CTI_PCI_DEVICE_ID_CRG001 0x0900 137 138static void plx_pci_reset_common(struct pci_dev *pdev); 139static void plx_pci_reset_marathon(struct pci_dev *pdev); 140static void plx9056_pci_reset_common(struct pci_dev *pdev); 141 142struct plx_pci_channel_map { 143 u32 bar; 144 u32 offset; 145 u32 size; /* 0x00 - auto, e.g. length of entire bar */ 146}; 147 148struct plx_pci_card_info { 149 const char *name; 150 int channel_count; 151 u32 can_clock; 152 u8 ocr; /* output control register */ 153 u8 cdr; /* clock divider register */ 154 155 /* Parameters for mapping local configuration space */ 156 struct plx_pci_channel_map conf_map; 157 158 /* Parameters for mapping the SJA1000 chips */ 159 struct plx_pci_channel_map chan_map_tbl[PLX_PCI_MAX_CHAN]; 160 161 /* Pointer to device-dependent reset function */ 162 void (*reset_func)(struct pci_dev *pdev); 163}; 164 165static struct plx_pci_card_info plx_pci_card_info_adlink __devinitdata = { 166 "Adlink PCI-7841/cPCI-7841", 2, 167 PLX_PCI_CAN_CLOCK, PLX_PCI_OCR, PLX_PCI_CDR, 168 {1, 0x00, 0x00}, { {2, 0x00, 0x80}, {2, 0x80, 0x80} }, 169 &plx_pci_reset_common 170 /* based on PLX9052 */ 171}; 172 173static struct plx_pci_card_info plx_pci_card_info_adlink_se __devinitdata = { 174 "Adlink PCI-7841/cPCI-7841 SE", 2, 175 PLX_PCI_CAN_CLOCK, PLX_PCI_OCR, PLX_PCI_CDR, 176 {0, 0x00, 0x00}, { {2, 0x00, 0x80}, {2, 0x80, 0x80} }, 177 &plx_pci_reset_common 178 /* based on PLX9052 */ 179}; 180 181static struct plx_pci_card_info plx_pci_card_info_esd200 __devinitdata = { 182 "esd CAN-PCI/CPCI/PCI104/200", 2, 183 PLX_PCI_CAN_CLOCK, PLX_PCI_OCR, PLX_PCI_CDR, 184 {0, 0x00, 0x00}, { {2, 0x00, 0x80}, {2, 0x100, 0x80} }, 185 &plx_pci_reset_common 186 /* based on PLX9030/9050 */ 187}; 188 189static struct plx_pci_card_info plx_pci_card_info_esd266 __devinitdata = { 190 "esd CAN-PCI/PMC/266", 2, 191 PLX_PCI_CAN_CLOCK, PLX_PCI_OCR, PLX_PCI_CDR, 192 {0, 0x00, 0x00}, { {2, 0x00, 0x80}, {2, 0x100, 0x80} }, 193 &plx9056_pci_reset_common 194 /* based on PLX9056 */ 195}; 196 197static struct plx_pci_card_info plx_pci_card_info_esd2000 __devinitdata = { 198 "esd CAN-PCIe/2000", 2, 199 PLX_PCI_CAN_CLOCK, PLX_PCI_OCR, PLX_PCI_CDR, 200 {0, 0x00, 0x00}, { {2, 0x00, 0x80}, {2, 0x100, 0x80} }, 201 &plx9056_pci_reset_common 202 /* based on PEX8311 */ 203}; 204 205static struct plx_pci_card_info plx_pci_card_info_ixxat __devinitdata = { 206 "IXXAT PC-I 04/PCI", 2, 207 PLX_PCI_CAN_CLOCK, PLX_PCI_OCR, PLX_PCI_CDR, 208 {0, 0x00, 0x00}, { {2, 0x00, 0x80}, {2, 0x200, 0x80} }, 209 &plx_pci_reset_common 210 /* based on PLX9050 */ 211}; 212 213static struct plx_pci_card_info plx_pci_card_info_marathon __devinitdata = { 214 "Marathon CAN-bus-PCI", 2, 215 PLX_PCI_CAN_CLOCK, PLX_PCI_OCR, PLX_PCI_CDR, 216 {0, 0x00, 0x00}, { {2, 0x00, 0x00}, {4, 0x00, 0x00} }, 217 &plx_pci_reset_marathon 218 /* based on PLX9052 */ 219}; 220 221static struct plx_pci_card_info plx_pci_card_info_tews __devinitdata = { 222 "TEWS TECHNOLOGIES TPMC810", 2, 223 PLX_PCI_CAN_CLOCK, PLX_PCI_OCR, PLX_PCI_CDR, 224 {0, 0x00, 0x00}, { {2, 0x000, 0x80}, {2, 0x100, 0x80} }, 225 &plx_pci_reset_common 226 /* based on PLX9030 */ 227}; 228 229static struct plx_pci_card_info plx_pci_card_info_cti __devinitdata = { 230 "Connect Tech Inc. CANpro/104-Plus Opto (CRG001)", 2, 231 PLX_PCI_CAN_CLOCK, PLX_PCI_OCR, PLX_PCI_CDR, 232 {0, 0x00, 0x00}, { {2, 0x000, 0x80}, {2, 0x100, 0x80} }, 233 &plx_pci_reset_common 234 /* based on PLX9030 */ 235}; 236 237static DEFINE_PCI_DEVICE_TABLE(plx_pci_tbl) = { 238 { 239 /* Adlink PCI-7841/cPCI-7841 */ 240 ADLINK_PCI_VENDOR_ID, ADLINK_PCI_DEVICE_ID, 241 PCI_ANY_ID, PCI_ANY_ID, 242 PCI_CLASS_NETWORK_OTHER << 8, ~0, 243 (kernel_ulong_t)&plx_pci_card_info_adlink 244 }, 245 { 246 /* Adlink PCI-7841/cPCI-7841 SE */ 247 ADLINK_PCI_VENDOR_ID, ADLINK_PCI_DEVICE_ID, 248 PCI_ANY_ID, PCI_ANY_ID, 249 PCI_CLASS_COMMUNICATION_OTHER << 8, ~0, 250 (kernel_ulong_t)&plx_pci_card_info_adlink_se 251 }, 252 { 253 /* esd CAN-PCI/200 */ 254 PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050, 255 PCI_VENDOR_ID_ESDGMBH, ESD_PCI_SUB_SYS_ID_PCI200, 256 0, 0, 257 (kernel_ulong_t)&plx_pci_card_info_esd200 258 }, 259 { 260 /* esd CAN-CPCI/200 */ 261 PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9030, 262 PCI_VENDOR_ID_ESDGMBH, ESD_PCI_SUB_SYS_ID_CPCI200, 263 0, 0, 264 (kernel_ulong_t)&plx_pci_card_info_esd200 265 }, 266 { 267 /* esd CAN-PCI104/200 */ 268 PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9030, 269 PCI_VENDOR_ID_ESDGMBH, ESD_PCI_SUB_SYS_ID_PCI104200, 270 0, 0, 271 (kernel_ulong_t)&plx_pci_card_info_esd200 272 }, 273 { 274 /* esd CAN-PCI/266 */ 275 PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9056, 276 PCI_VENDOR_ID_ESDGMBH, ESD_PCI_SUB_SYS_ID_PCI266, 277 0, 0, 278 (kernel_ulong_t)&plx_pci_card_info_esd266 279 }, 280 { 281 /* esd CAN-PMC/266 */ 282 PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9056, 283 PCI_VENDOR_ID_ESDGMBH, ESD_PCI_SUB_SYS_ID_PMC266, 284 0, 0, 285 (kernel_ulong_t)&plx_pci_card_info_esd266 286 }, 287 { 288 /* esd CAN-PCIE/2000 */ 289 PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9056, 290 PCI_VENDOR_ID_ESDGMBH, ESD_PCI_SUB_SYS_ID_PCIE2000, 291 0, 0, 292 (kernel_ulong_t)&plx_pci_card_info_esd2000 293 }, 294 { 295 /* IXXAT PC-I 04/PCI card */ 296 IXXAT_PCI_VENDOR_ID, IXXAT_PCI_DEVICE_ID, 297 PCI_ANY_ID, IXXAT_PCI_SUB_SYS_ID, 298 0, 0, 299 (kernel_ulong_t)&plx_pci_card_info_ixxat 300 }, 301 { 302 /* Marathon CAN-bus-PCI card */ 303 PCI_VENDOR_ID_PLX, MARATHON_PCI_DEVICE_ID, 304 PCI_ANY_ID, PCI_ANY_ID, 305 0, 0, 306 (kernel_ulong_t)&plx_pci_card_info_marathon 307 }, 308 { 309 /* TEWS TECHNOLOGIES TPMC810 card */ 310 TEWS_PCI_VENDOR_ID, TEWS_PCI_DEVICE_ID_TMPC810, 311 PCI_ANY_ID, PCI_ANY_ID, 312 0, 0, 313 (kernel_ulong_t)&plx_pci_card_info_tews 314 }, 315 { 316 /* Connect Tech Inc. CANpro/104-Plus Opto (CRG001) card */ 317 PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9030, 318 CTI_PCI_VENDOR_ID, CTI_PCI_DEVICE_ID_CRG001, 319 0, 0, 320 (kernel_ulong_t)&plx_pci_card_info_cti 321 }, 322 { 0,} 323}; 324MODULE_DEVICE_TABLE(pci, plx_pci_tbl); 325 326static u8 plx_pci_read_reg(const struct sja1000_priv *priv, int port) 327{ 328 return ioread8(priv->reg_base + port); 329} 330 331static void plx_pci_write_reg(const struct sja1000_priv *priv, int port, u8 val) 332{ 333 iowrite8(val, priv->reg_base + port); 334} 335 336/* 337 * Check if a CAN controller is present at the specified location 338 * by trying to switch 'em from the Basic mode into the PeliCAN mode. 339 * Also check states of some registers in reset mode. 340 */ 341static inline int plx_pci_check_sja1000(const struct sja1000_priv *priv) 342{ 343 int flag = 0; 344 345 /* 346 * Check registers after hardware reset (the Basic mode) 347 * See states on p. 10 of the Datasheet. 348 */ 349 if ((priv->read_reg(priv, REG_CR) & REG_CR_BASICCAN_INITIAL_MASK) == 350 REG_CR_BASICCAN_INITIAL && 351 (priv->read_reg(priv, REG_SR) == REG_SR_BASICCAN_INITIAL) && 352 (priv->read_reg(priv, REG_IR) == REG_IR_BASICCAN_INITIAL)) 353 flag = 1; 354 355 /* Bring the SJA1000 into the PeliCAN mode*/ 356 priv->write_reg(priv, REG_CDR, CDR_PELICAN); 357 358 /* 359 * Check registers after reset in the PeliCAN mode. 360 * See states on p. 23 of the Datasheet. 361 */ 362 if (priv->read_reg(priv, REG_MOD) == REG_MOD_PELICAN_INITIAL && 363 priv->read_reg(priv, REG_SR) == REG_SR_PELICAN_INITIAL && 364 priv->read_reg(priv, REG_IR) == REG_IR_PELICAN_INITIAL) 365 return flag; 366 367 return 0; 368} 369 370/* 371 * PLX9030/50/52 software reset 372 * Also LRESET# asserts and brings to reset device on the Local Bus (if wired). 373 * For most cards it's enough for reset the SJA1000 chips. 374 */ 375static void plx_pci_reset_common(struct pci_dev *pdev) 376{ 377 struct plx_pci_card *card = pci_get_drvdata(pdev); 378 u32 cntrl; 379 380 cntrl = ioread32(card->conf_addr + PLX_CNTRL); 381 cntrl |= PLX_PCI_RESET; 382 iowrite32(cntrl, card->conf_addr + PLX_CNTRL); 383 udelay(100); 384 cntrl ^= PLX_PCI_RESET; 385 iowrite32(cntrl, card->conf_addr + PLX_CNTRL); 386}; 387 388/* 389 * PLX9056 software reset 390 * Assert LRESET# and reset device(s) on the Local Bus (if wired). 391 */ 392static void plx9056_pci_reset_common(struct pci_dev *pdev) 393{ 394 struct plx_pci_card *card = pci_get_drvdata(pdev); 395 u32 cntrl; 396 397 /* issue a local bus reset */ 398 cntrl = ioread32(card->conf_addr + PLX9056_CNTRL); 399 cntrl |= PLX_PCI_RESET; 400 iowrite32(cntrl, card->conf_addr + PLX9056_CNTRL); 401 udelay(100); 402 cntrl ^= PLX_PCI_RESET; 403 iowrite32(cntrl, card->conf_addr + PLX9056_CNTRL); 404 405 /* reload local configuration from EEPROM */ 406 cntrl |= PLX9056_PCI_RCR; 407 iowrite32(cntrl, card->conf_addr + PLX9056_CNTRL); 408 409 /* 410 * There is no safe way to poll for the end 411 * of reconfiguration process. Waiting for 10ms 412 * is safe. 413 */ 414 mdelay(10); 415 416 cntrl ^= PLX9056_PCI_RCR; 417 iowrite32(cntrl, card->conf_addr + PLX9056_CNTRL); 418}; 419 420/* Special reset function for Marathon card */ 421static void plx_pci_reset_marathon(struct pci_dev *pdev) 422{ 423 void __iomem *reset_addr; 424 int i; 425 static const int reset_bar[2] = {3, 5}; 426 427 plx_pci_reset_common(pdev); 428 429 for (i = 0; i < 2; i++) { 430 reset_addr = pci_iomap(pdev, reset_bar[i], 0); 431 if (!reset_addr) { 432 dev_err(&pdev->dev, "Failed to remap reset " 433 "space %d (BAR%d)\n", i, reset_bar[i]); 434 } else { 435 /* reset the SJA1000 chip */ 436 iowrite8(0x1, reset_addr); 437 udelay(100); 438 pci_iounmap(pdev, reset_addr); 439 } 440 } 441} 442 443static void plx_pci_del_card(struct pci_dev *pdev) 444{ 445 struct plx_pci_card *card = pci_get_drvdata(pdev); 446 struct net_device *dev; 447 struct sja1000_priv *priv; 448 int i = 0; 449 450 for (i = 0; i < PLX_PCI_MAX_CHAN; i++) { 451 dev = card->net_dev[i]; 452 if (!dev) 453 continue; 454 455 dev_info(&pdev->dev, "Removing %s\n", dev->name); 456 unregister_sja1000dev(dev); 457 priv = netdev_priv(dev); 458 if (priv->reg_base) 459 pci_iounmap(pdev, priv->reg_base); 460 free_sja1000dev(dev); 461 } 462 463 card->reset_func(pdev); 464 465 /* 466 * Disable interrupts from PCI-card and disable local 467 * interrupts 468 */ 469 if (pdev->device != PCI_DEVICE_ID_PLX_9056) 470 iowrite32(0x0, card->conf_addr + PLX_INTCSR); 471 else 472 iowrite32(0x0, card->conf_addr + PLX9056_INTCSR); 473 474 if (card->conf_addr) 475 pci_iounmap(pdev, card->conf_addr); 476 477 kfree(card); 478 479 pci_disable_device(pdev); 480 pci_set_drvdata(pdev, NULL); 481} 482 483/* 484 * Probe PLX90xx based device for the SJA1000 chips and register each 485 * available CAN channel to SJA1000 Socket-CAN subsystem. 486 */ 487static int __devinit plx_pci_add_card(struct pci_dev *pdev, 488 const struct pci_device_id *ent) 489{ 490 struct sja1000_priv *priv; 491 struct net_device *dev; 492 struct plx_pci_card *card; 493 struct plx_pci_card_info *ci; 494 int err, i; 495 u32 val; 496 void __iomem *addr; 497 498 ci = (struct plx_pci_card_info *)ent->driver_data; 499 500 if (pci_enable_device(pdev) < 0) { 501 dev_err(&pdev->dev, "Failed to enable PCI device\n"); 502 return -ENODEV; 503 } 504 505 dev_info(&pdev->dev, "Detected \"%s\" card at slot #%i\n", 506 ci->name, PCI_SLOT(pdev->devfn)); 507 508 /* Allocate card structures to hold addresses, ... */ 509 card = kzalloc(sizeof(*card), GFP_KERNEL); 510 if (!card) { 511 dev_err(&pdev->dev, "Unable to allocate memory\n"); 512 pci_disable_device(pdev); 513 return -ENOMEM; 514 } 515 516 pci_set_drvdata(pdev, card); 517 518 card->channels = 0; 519 520 /* Remap PLX90xx configuration space */ 521 addr = pci_iomap(pdev, ci->conf_map.bar, ci->conf_map.size); 522 if (!addr) { 523 err = -ENOMEM; 524 dev_err(&pdev->dev, "Failed to remap configuration space " 525 "(BAR%d)\n", ci->conf_map.bar); 526 goto failure_cleanup; 527 } 528 card->conf_addr = addr + ci->conf_map.offset; 529 530 ci->reset_func(pdev); 531 card->reset_func = ci->reset_func; 532 533 /* Detect available channels */ 534 for (i = 0; i < ci->channel_count; i++) { 535 struct plx_pci_channel_map *cm = &ci->chan_map_tbl[i]; 536 537 dev = alloc_sja1000dev(0); 538 if (!dev) { 539 err = -ENOMEM; 540 goto failure_cleanup; 541 } 542 543 card->net_dev[i] = dev; 544 priv = netdev_priv(dev); 545 priv->priv = card; 546 priv->irq_flags = IRQF_SHARED; 547 548 dev->irq = pdev->irq; 549 550 /* 551 * Remap IO space of the SJA1000 chips 552 * This is device-dependent mapping 553 */ 554 addr = pci_iomap(pdev, cm->bar, cm->size); 555 if (!addr) { 556 err = -ENOMEM; 557 dev_err(&pdev->dev, "Failed to remap BAR%d\n", cm->bar); 558 goto failure_cleanup; 559 } 560 561 priv->reg_base = addr + cm->offset; 562 priv->read_reg = plx_pci_read_reg; 563 priv->write_reg = plx_pci_write_reg; 564 565 /* Check if channel is present */ 566 if (plx_pci_check_sja1000(priv)) { 567 priv->can.clock.freq = ci->can_clock; 568 priv->ocr = ci->ocr; 569 priv->cdr = ci->cdr; 570 571 SET_NETDEV_DEV(dev, &pdev->dev); 572 573 /* Register SJA1000 device */ 574 err = register_sja1000dev(dev); 575 if (err) { 576 dev_err(&pdev->dev, "Registering device failed " 577 "(err=%d)\n", err); 578 goto failure_cleanup; 579 } 580 581 card->channels++; 582 583 dev_info(&pdev->dev, "Channel #%d at 0x%p, irq %d " 584 "registered as %s\n", i + 1, priv->reg_base, 585 dev->irq, dev->name); 586 } else { 587 dev_err(&pdev->dev, "Channel #%d not detected\n", 588 i + 1); 589 free_sja1000dev(dev); 590 card->net_dev[i] = NULL; 591 } 592 } 593 594 if (!card->channels) { 595 err = -ENODEV; 596 goto failure_cleanup; 597 } 598 599 /* 600 * Enable interrupts from PCI-card (PLX90xx) and enable Local_1, 601 * Local_2 interrupts from the SJA1000 chips 602 */ 603 if (pdev->device != PCI_DEVICE_ID_PLX_9056) { 604 val = ioread32(card->conf_addr + PLX_INTCSR); 605 if (pdev->subsystem_vendor == PCI_VENDOR_ID_ESDGMBH) 606 val |= PLX_LINT1_EN | PLX_PCI_INT_EN; 607 else 608 val |= PLX_LINT1_EN | PLX_LINT2_EN | PLX_PCI_INT_EN; 609 iowrite32(val, card->conf_addr + PLX_INTCSR); 610 } else { 611 iowrite32(PLX9056_LINTI | PLX9056_PCI_INT_EN, 612 card->conf_addr + PLX9056_INTCSR); 613 } 614 return 0; 615 616failure_cleanup: 617 dev_err(&pdev->dev, "Error: %d. Cleaning Up.\n", err); 618 619 plx_pci_del_card(pdev); 620 621 return err; 622} 623 624static struct pci_driver plx_pci_driver = { 625 .name = DRV_NAME, 626 .id_table = plx_pci_tbl, 627 .probe = plx_pci_add_card, 628 .remove = plx_pci_del_card, 629}; 630 631module_pci_driver(plx_pci_driver); 632