sja1000.h revision 57c8a456640fa3ca777652f11f2db4179a3e66b6
1/* 2 * sja1000.h - Philips SJA1000 network device driver 3 * 4 * Copyright (c) 2003 Matthias Brukner, Trajet Gmbh, Rebenring 33, 5 * 38106 Braunschweig, GERMANY 6 * 7 * Copyright (c) 2002-2007 Volkswagen Group Electronic Research 8 * All rights reserved. 9 * 10 * Redistribution and use in source and binary forms, with or without 11 * modification, are permitted provided that the following conditions 12 * are met: 13 * 1. Redistributions of source code must retain the above copyright 14 * notice, this list of conditions and the following disclaimer. 15 * 2. Redistributions in binary form must reproduce the above copyright 16 * notice, this list of conditions and the following disclaimer in the 17 * documentation and/or other materials provided with the distribution. 18 * 3. Neither the name of Volkswagen nor the names of its contributors 19 * may be used to endorse or promote products derived from this software 20 * without specific prior written permission. 21 * 22 * Alternatively, provided that this notice is retained in full, this 23 * software may be distributed under the terms of the GNU General 24 * Public License ("GPL") version 2, in which case the provisions of the 25 * GPL apply INSTEAD OF those given above. 26 * 27 * The provided data structures and external interfaces from this code 28 * are not restricted to be used by modules with a GPL compatible license. 29 * 30 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 31 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT 32 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR 33 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT 34 * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, 35 * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT 36 * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, 37 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY 38 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 39 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE 40 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH 41 * DAMAGE. 42 * 43 * Send feedback to <socketcan-users@lists.berlios.de> 44 * 45 */ 46 47#ifndef SJA1000_DEV_H 48#define SJA1000_DEV_H 49 50#include <linux/can/dev.h> 51#include <linux/can/platform/sja1000.h> 52 53#define SJA1000_ECHO_SKB_MAX 1 /* the SJA1000 has one TX buffer object */ 54 55#define SJA1000_MAX_IRQ 20 /* max. number of interrupts handled in ISR */ 56 57/* SJA1000 registers - manual section 6.4 (Pelican Mode) */ 58#define REG_MOD 0x00 59#define REG_CMR 0x01 60#define REG_SR 0x02 61#define REG_IR 0x03 62#define REG_IER 0x04 63#define REG_ALC 0x0B 64#define REG_ECC 0x0C 65#define REG_EWL 0x0D 66#define REG_RXERR 0x0E 67#define REG_TXERR 0x0F 68#define REG_ACCC0 0x10 69#define REG_ACCC1 0x11 70#define REG_ACCC2 0x12 71#define REG_ACCC3 0x13 72#define REG_ACCM0 0x14 73#define REG_ACCM1 0x15 74#define REG_ACCM2 0x16 75#define REG_ACCM3 0x17 76#define REG_RMC 0x1D 77#define REG_RBSA 0x1E 78 79/* Common registers - manual section 6.5 */ 80#define REG_BTR0 0x06 81#define REG_BTR1 0x07 82#define REG_OCR 0x08 83#define REG_CDR 0x1F 84 85#define REG_FI 0x10 86#define SFF_BUF 0x13 87#define EFF_BUF 0x15 88 89#define FI_FF 0x80 90#define FI_RTR 0x40 91 92#define REG_ID1 0x11 93#define REG_ID2 0x12 94#define REG_ID3 0x13 95#define REG_ID4 0x14 96 97#define CAN_RAM 0x20 98 99/* mode register */ 100#define MOD_RM 0x01 101#define MOD_LOM 0x02 102#define MOD_STM 0x04 103#define MOD_AFM 0x08 104#define MOD_SM 0x10 105 106/* commands */ 107#define CMD_SRR 0x10 108#define CMD_CDO 0x08 109#define CMD_RRB 0x04 110#define CMD_AT 0x02 111#define CMD_TR 0x01 112 113/* interrupt sources */ 114#define IRQ_BEI 0x80 115#define IRQ_ALI 0x40 116#define IRQ_EPI 0x20 117#define IRQ_WUI 0x10 118#define IRQ_DOI 0x08 119#define IRQ_EI 0x04 120#define IRQ_TI 0x02 121#define IRQ_RI 0x01 122#define IRQ_ALL 0xFF 123#define IRQ_OFF 0x00 124 125/* status register content */ 126#define SR_BS 0x80 127#define SR_ES 0x40 128#define SR_TS 0x20 129#define SR_RS 0x10 130#define SR_TCS 0x08 131#define SR_TBS 0x04 132#define SR_DOS 0x02 133#define SR_RBS 0x01 134 135#define SR_CRIT (SR_BS|SR_ES) 136 137/* ECC register */ 138#define ECC_SEG 0x1F 139#define ECC_DIR 0x20 140#define ECC_ERR 6 141#define ECC_BIT 0x00 142#define ECC_FORM 0x40 143#define ECC_STUFF 0x80 144#define ECC_MASK 0xc0 145 146/* 147 * Flags for sja1000priv.flags 148 */ 149#define SJA1000_CUSTOM_IRQ_HANDLER 0x1 150 151/* 152 * SJA1000 private data structure 153 */ 154struct sja1000_priv { 155 struct can_priv can; /* must be the first member */ 156 int open_time; 157 struct sk_buff *echo_skb; 158 159 /* the lower-layer is responsible for appropriate locking */ 160 u8 (*read_reg) (const struct sja1000_priv *priv, int reg); 161 void (*write_reg) (const struct sja1000_priv *priv, int reg, u8 val); 162 void (*pre_irq) (const struct sja1000_priv *priv); 163 void (*post_irq) (const struct sja1000_priv *priv); 164 165 void *priv; /* for board-specific data */ 166 struct net_device *dev; 167 168 void __iomem *reg_base; /* ioremap'ed address to registers */ 169 unsigned long irq_flags; /* for request_irq() */ 170 spinlock_t cmdreg_lock; /* lock for concurrent cmd register writes */ 171 172 u16 flags; /* custom mode flags */ 173 u8 ocr; /* output control register */ 174 u8 cdr; /* clock divider register */ 175}; 176 177struct net_device *alloc_sja1000dev(int sizeof_priv); 178void free_sja1000dev(struct net_device *dev); 179int register_sja1000dev(struct net_device *dev); 180void unregister_sja1000dev(struct net_device *dev); 181 182irqreturn_t sja1000_interrupt(int irq, void *dev_id); 183 184#endif /* SJA1000_DEV_H */ 185