bnx2x_sp.h revision 7609647e25a486174333ab01dcdaa23b517b8684
1/* bnx2x_sp.h: Broadcom Everest network driver. 2 * 3 * Copyright (c) 2011-2013 Broadcom Corporation 4 * 5 * Unless you and Broadcom execute a separate written software license 6 * agreement governing use of this software, this software is licensed to you 7 * under the terms of the GNU General Public License version 2, available 8 * at http://www.gnu.org/licenses/old-licenses/gpl-2.0.html (the "GPL"). 9 * 10 * Notwithstanding the above, under no circumstances may you combine this 11 * software in any way with any other Broadcom software provided under a 12 * license other than the GPL, without Broadcom's express prior written 13 * consent. 14 * 15 * Maintained by: Ariel Elior <ariel.elior@qlogic.com> 16 * Written by: Vladislav Zolotarov 17 * 18 */ 19#ifndef BNX2X_SP_VERBS 20#define BNX2X_SP_VERBS 21 22struct bnx2x; 23struct eth_context; 24 25/* Bits representing general command's configuration */ 26enum { 27 RAMROD_TX, 28 RAMROD_RX, 29 /* Wait until all pending commands complete */ 30 RAMROD_COMP_WAIT, 31 /* Don't send a ramrod, only update a registry */ 32 RAMROD_DRV_CLR_ONLY, 33 /* Configure HW according to the current object state */ 34 RAMROD_RESTORE, 35 /* Execute the next command now */ 36 RAMROD_EXEC, 37 /* Don't add a new command and continue execution of postponed 38 * commands. If not set a new command will be added to the 39 * pending commands list. 40 */ 41 RAMROD_CONT, 42 /* If there is another pending ramrod, wait until it finishes and 43 * re-try to submit this one. This flag can be set only in sleepable 44 * context, and should not be set from the context that completes the 45 * ramrods as deadlock will occur. 46 */ 47 RAMROD_RETRY, 48}; 49 50typedef enum { 51 BNX2X_OBJ_TYPE_RX, 52 BNX2X_OBJ_TYPE_TX, 53 BNX2X_OBJ_TYPE_RX_TX, 54} bnx2x_obj_type; 55 56/* Public slow path states */ 57enum { 58 BNX2X_FILTER_MAC_PENDING, 59 BNX2X_FILTER_VLAN_PENDING, 60 BNX2X_FILTER_VLAN_MAC_PENDING, 61 BNX2X_FILTER_RX_MODE_PENDING, 62 BNX2X_FILTER_RX_MODE_SCHED, 63 BNX2X_FILTER_ISCSI_ETH_START_SCHED, 64 BNX2X_FILTER_ISCSI_ETH_STOP_SCHED, 65 BNX2X_FILTER_FCOE_ETH_START_SCHED, 66 BNX2X_FILTER_FCOE_ETH_STOP_SCHED, 67 BNX2X_FILTER_MCAST_PENDING, 68 BNX2X_FILTER_MCAST_SCHED, 69 BNX2X_FILTER_RSS_CONF_PENDING, 70 BNX2X_AFEX_FCOE_Q_UPDATE_PENDING, 71 BNX2X_AFEX_PENDING_VIFSET_MCP_ACK 72}; 73 74struct bnx2x_raw_obj { 75 u8 func_id; 76 77 /* Queue params */ 78 u8 cl_id; 79 u32 cid; 80 81 /* Ramrod data buffer params */ 82 void *rdata; 83 dma_addr_t rdata_mapping; 84 85 /* Ramrod state params */ 86 int state; /* "ramrod is pending" state bit */ 87 unsigned long *pstate; /* pointer to state buffer */ 88 89 bnx2x_obj_type obj_type; 90 91 int (*wait_comp)(struct bnx2x *bp, 92 struct bnx2x_raw_obj *o); 93 94 bool (*check_pending)(struct bnx2x_raw_obj *o); 95 void (*clear_pending)(struct bnx2x_raw_obj *o); 96 void (*set_pending)(struct bnx2x_raw_obj *o); 97}; 98 99/************************* VLAN-MAC commands related parameters ***************/ 100struct bnx2x_mac_ramrod_data { 101 u8 mac[ETH_ALEN]; 102 u8 is_inner_mac; 103}; 104 105struct bnx2x_vlan_ramrod_data { 106 u16 vlan; 107}; 108 109struct bnx2x_vlan_mac_ramrod_data { 110 u8 mac[ETH_ALEN]; 111 u8 is_inner_mac; 112 u16 vlan; 113}; 114 115union bnx2x_classification_ramrod_data { 116 struct bnx2x_mac_ramrod_data mac; 117 struct bnx2x_vlan_ramrod_data vlan; 118 struct bnx2x_vlan_mac_ramrod_data vlan_mac; 119}; 120 121/* VLAN_MAC commands */ 122enum bnx2x_vlan_mac_cmd { 123 BNX2X_VLAN_MAC_ADD, 124 BNX2X_VLAN_MAC_DEL, 125 BNX2X_VLAN_MAC_MOVE, 126}; 127 128struct bnx2x_vlan_mac_data { 129 /* Requested command: BNX2X_VLAN_MAC_XX */ 130 enum bnx2x_vlan_mac_cmd cmd; 131 /* used to contain the data related vlan_mac_flags bits from 132 * ramrod parameters. 133 */ 134 unsigned long vlan_mac_flags; 135 136 /* Needed for MOVE command */ 137 struct bnx2x_vlan_mac_obj *target_obj; 138 139 union bnx2x_classification_ramrod_data u; 140}; 141 142/*************************** Exe Queue obj ************************************/ 143union bnx2x_exe_queue_cmd_data { 144 struct bnx2x_vlan_mac_data vlan_mac; 145 146 struct { 147 /* TODO */ 148 } mcast; 149}; 150 151struct bnx2x_exeq_elem { 152 struct list_head link; 153 154 /* Length of this element in the exe_chunk. */ 155 int cmd_len; 156 157 union bnx2x_exe_queue_cmd_data cmd_data; 158}; 159 160union bnx2x_qable_obj; 161 162union bnx2x_exeq_comp_elem { 163 union event_ring_elem *elem; 164}; 165 166struct bnx2x_exe_queue_obj; 167 168typedef int (*exe_q_validate)(struct bnx2x *bp, 169 union bnx2x_qable_obj *o, 170 struct bnx2x_exeq_elem *elem); 171 172typedef int (*exe_q_remove)(struct bnx2x *bp, 173 union bnx2x_qable_obj *o, 174 struct bnx2x_exeq_elem *elem); 175 176/* Return positive if entry was optimized, 0 - if not, negative 177 * in case of an error. 178 */ 179typedef int (*exe_q_optimize)(struct bnx2x *bp, 180 union bnx2x_qable_obj *o, 181 struct bnx2x_exeq_elem *elem); 182typedef int (*exe_q_execute)(struct bnx2x *bp, 183 union bnx2x_qable_obj *o, 184 struct list_head *exe_chunk, 185 unsigned long *ramrod_flags); 186typedef struct bnx2x_exeq_elem * 187 (*exe_q_get)(struct bnx2x_exe_queue_obj *o, 188 struct bnx2x_exeq_elem *elem); 189 190struct bnx2x_exe_queue_obj { 191 /* Commands pending for an execution. */ 192 struct list_head exe_queue; 193 194 /* Commands pending for an completion. */ 195 struct list_head pending_comp; 196 197 spinlock_t lock; 198 199 /* Maximum length of commands' list for one execution */ 200 int exe_chunk_len; 201 202 union bnx2x_qable_obj *owner; 203 204 /****** Virtual functions ******/ 205 /** 206 * Called before commands execution for commands that are really 207 * going to be executed (after 'optimize'). 208 * 209 * Must run under exe_queue->lock 210 */ 211 exe_q_validate validate; 212 213 /** 214 * Called before removing pending commands, cleaning allocated 215 * resources (e.g., credits from validate) 216 */ 217 exe_q_remove remove; 218 219 /** 220 * This will try to cancel the current pending commands list 221 * considering the new command. 222 * 223 * Returns the number of optimized commands or a negative error code 224 * 225 * Must run under exe_queue->lock 226 */ 227 exe_q_optimize optimize; 228 229 /** 230 * Run the next commands chunk (owner specific). 231 */ 232 exe_q_execute execute; 233 234 /** 235 * Return the exe_queue element containing the specific command 236 * if any. Otherwise return NULL. 237 */ 238 exe_q_get get; 239}; 240/***************** Classification verbs: Set/Del MAC/VLAN/VLAN-MAC ************/ 241/* 242 * Element in the VLAN_MAC registry list having all currently configured 243 * rules. 244 */ 245struct bnx2x_vlan_mac_registry_elem { 246 struct list_head link; 247 248 /* Used to store the cam offset used for the mac/vlan/vlan-mac. 249 * Relevant for 57710 and 57711 only. VLANs and MACs share the 250 * same CAM for these chips. 251 */ 252 int cam_offset; 253 254 /* Needed for DEL and RESTORE flows */ 255 unsigned long vlan_mac_flags; 256 257 union bnx2x_classification_ramrod_data u; 258}; 259 260/* Bits representing VLAN_MAC commands specific flags */ 261enum { 262 BNX2X_UC_LIST_MAC, 263 BNX2X_ETH_MAC, 264 BNX2X_ISCSI_ETH_MAC, 265 BNX2X_NETQ_ETH_MAC, 266 BNX2X_DONT_CONSUME_CAM_CREDIT, 267 BNX2X_DONT_CONSUME_CAM_CREDIT_DEST, 268}; 269/* When looking for matching filters, some flags are not interesting */ 270#define BNX2X_VLAN_MAC_CMP_MASK (1 << BNX2X_UC_LIST_MAC | \ 271 1 << BNX2X_ETH_MAC | \ 272 1 << BNX2X_ISCSI_ETH_MAC | \ 273 1 << BNX2X_NETQ_ETH_MAC) 274#define BNX2X_VLAN_MAC_CMP_FLAGS(flags) \ 275 ((flags) & BNX2X_VLAN_MAC_CMP_MASK) 276 277struct bnx2x_vlan_mac_ramrod_params { 278 /* Object to run the command from */ 279 struct bnx2x_vlan_mac_obj *vlan_mac_obj; 280 281 /* General command flags: COMP_WAIT, etc. */ 282 unsigned long ramrod_flags; 283 284 /* Command specific configuration request */ 285 struct bnx2x_vlan_mac_data user_req; 286}; 287 288struct bnx2x_vlan_mac_obj { 289 struct bnx2x_raw_obj raw; 290 291 /* Bookkeeping list: will prevent the addition of already existing 292 * entries. 293 */ 294 struct list_head head; 295 /* Implement a simple reader/writer lock on the head list. 296 * all these fields should only be accessed under the exe_queue lock 297 */ 298 u8 head_reader; /* Num. of readers accessing head list */ 299 bool head_exe_request; /* Pending execution request. */ 300 unsigned long saved_ramrod_flags; /* Ramrods of pending execution */ 301 302 /* TODO: Add it's initialization in the init functions */ 303 struct bnx2x_exe_queue_obj exe_queue; 304 305 /* MACs credit pool */ 306 struct bnx2x_credit_pool_obj *macs_pool; 307 308 /* VLANs credit pool */ 309 struct bnx2x_credit_pool_obj *vlans_pool; 310 311 /* RAMROD command to be used */ 312 int ramrod_cmd; 313 314 /* copy first n elements onto preallocated buffer 315 * 316 * @param n number of elements to get 317 * @param buf buffer preallocated by caller into which elements 318 * will be copied. Note elements are 4-byte aligned 319 * so buffer size must be able to accommodate the 320 * aligned elements. 321 * 322 * @return number of copied bytes 323 */ 324 int (*get_n_elements)(struct bnx2x *bp, 325 struct bnx2x_vlan_mac_obj *o, int n, u8 *base, 326 u8 stride, u8 size); 327 328 /** 329 * Checks if ADD-ramrod with the given params may be performed. 330 * 331 * @return zero if the element may be added 332 */ 333 334 int (*check_add)(struct bnx2x *bp, 335 struct bnx2x_vlan_mac_obj *o, 336 union bnx2x_classification_ramrod_data *data); 337 338 /** 339 * Checks if DEL-ramrod with the given params may be performed. 340 * 341 * @return true if the element may be deleted 342 */ 343 struct bnx2x_vlan_mac_registry_elem * 344 (*check_del)(struct bnx2x *bp, 345 struct bnx2x_vlan_mac_obj *o, 346 union bnx2x_classification_ramrod_data *data); 347 348 /** 349 * Checks if DEL-ramrod with the given params may be performed. 350 * 351 * @return true if the element may be deleted 352 */ 353 bool (*check_move)(struct bnx2x *bp, 354 struct bnx2x_vlan_mac_obj *src_o, 355 struct bnx2x_vlan_mac_obj *dst_o, 356 union bnx2x_classification_ramrod_data *data); 357 358 /** 359 * Update the relevant credit object(s) (consume/return 360 * correspondingly). 361 */ 362 bool (*get_credit)(struct bnx2x_vlan_mac_obj *o); 363 bool (*put_credit)(struct bnx2x_vlan_mac_obj *o); 364 bool (*get_cam_offset)(struct bnx2x_vlan_mac_obj *o, int *offset); 365 bool (*put_cam_offset)(struct bnx2x_vlan_mac_obj *o, int offset); 366 367 /** 368 * Configures one rule in the ramrod data buffer. 369 */ 370 void (*set_one_rule)(struct bnx2x *bp, 371 struct bnx2x_vlan_mac_obj *o, 372 struct bnx2x_exeq_elem *elem, int rule_idx, 373 int cam_offset); 374 375 /** 376 * Delete all configured elements having the given 377 * vlan_mac_flags specification. Assumes no pending for 378 * execution commands. Will schedule all all currently 379 * configured MACs/VLANs/VLAN-MACs matching the vlan_mac_flags 380 * specification for deletion and will use the given 381 * ramrod_flags for the last DEL operation. 382 * 383 * @param bp 384 * @param o 385 * @param ramrod_flags RAMROD_XX flags 386 * 387 * @return 0 if the last operation has completed successfully 388 * and there are no more elements left, positive value 389 * if there are pending for completion commands, 390 * negative value in case of failure. 391 */ 392 int (*delete_all)(struct bnx2x *bp, 393 struct bnx2x_vlan_mac_obj *o, 394 unsigned long *vlan_mac_flags, 395 unsigned long *ramrod_flags); 396 397 /** 398 * Reconfigures the next MAC/VLAN/VLAN-MAC element from the previously 399 * configured elements list. 400 * 401 * @param bp 402 * @param p Command parameters (RAMROD_COMP_WAIT bit in 403 * ramrod_flags is only taken into an account) 404 * @param ppos a pointer to the cookie that should be given back in the 405 * next call to make function handle the next element. If 406 * *ppos is set to NULL it will restart the iterator. 407 * If returned *ppos == NULL this means that the last 408 * element has been handled. 409 * 410 * @return int 411 */ 412 int (*restore)(struct bnx2x *bp, 413 struct bnx2x_vlan_mac_ramrod_params *p, 414 struct bnx2x_vlan_mac_registry_elem **ppos); 415 416 /** 417 * Should be called on a completion arrival. 418 * 419 * @param bp 420 * @param o 421 * @param cqe Completion element we are handling 422 * @param ramrod_flags if RAMROD_CONT is set the next bulk of 423 * pending commands will be executed. 424 * RAMROD_DRV_CLR_ONLY and RAMROD_RESTORE 425 * may also be set if needed. 426 * 427 * @return 0 if there are neither pending nor waiting for 428 * completion commands. Positive value if there are 429 * pending for execution or for completion commands. 430 * Negative value in case of an error (including an 431 * error in the cqe). 432 */ 433 int (*complete)(struct bnx2x *bp, struct bnx2x_vlan_mac_obj *o, 434 union event_ring_elem *cqe, 435 unsigned long *ramrod_flags); 436 437 /** 438 * Wait for completion of all commands. Don't schedule new ones, 439 * just wait. It assumes that the completion code will schedule 440 * for new commands. 441 */ 442 int (*wait)(struct bnx2x *bp, struct bnx2x_vlan_mac_obj *o); 443}; 444 445enum { 446 BNX2X_LLH_CAM_ISCSI_ETH_LINE = 0, 447 BNX2X_LLH_CAM_ETH_LINE, 448 BNX2X_LLH_CAM_MAX_PF_LINE = NIG_REG_LLH1_FUNC_MEM_SIZE / 2 449}; 450 451/** RX_MODE verbs:DROP_ALL/ACCEPT_ALL/ACCEPT_ALL_MULTI/ACCEPT_ALL_VLAN/NORMAL */ 452 453/* RX_MODE ramrod special flags: set in rx_mode_flags field in 454 * a bnx2x_rx_mode_ramrod_params. 455 */ 456enum { 457 BNX2X_RX_MODE_FCOE_ETH, 458 BNX2X_RX_MODE_ISCSI_ETH, 459}; 460 461enum { 462 BNX2X_ACCEPT_UNICAST, 463 BNX2X_ACCEPT_MULTICAST, 464 BNX2X_ACCEPT_ALL_UNICAST, 465 BNX2X_ACCEPT_ALL_MULTICAST, 466 BNX2X_ACCEPT_BROADCAST, 467 BNX2X_ACCEPT_UNMATCHED, 468 BNX2X_ACCEPT_ANY_VLAN 469}; 470 471struct bnx2x_rx_mode_ramrod_params { 472 struct bnx2x_rx_mode_obj *rx_mode_obj; 473 unsigned long *pstate; 474 int state; 475 u8 cl_id; 476 u32 cid; 477 u8 func_id; 478 unsigned long ramrod_flags; 479 unsigned long rx_mode_flags; 480 481 /* rdata is either a pointer to eth_filter_rules_ramrod_data(e2) or to 482 * a tstorm_eth_mac_filter_config (e1x). 483 */ 484 void *rdata; 485 dma_addr_t rdata_mapping; 486 487 /* Rx mode settings */ 488 unsigned long rx_accept_flags; 489 490 /* internal switching settings */ 491 unsigned long tx_accept_flags; 492}; 493 494struct bnx2x_rx_mode_obj { 495 int (*config_rx_mode)(struct bnx2x *bp, 496 struct bnx2x_rx_mode_ramrod_params *p); 497 498 int (*wait_comp)(struct bnx2x *bp, 499 struct bnx2x_rx_mode_ramrod_params *p); 500}; 501 502/********************** Set multicast group ***********************************/ 503 504struct bnx2x_mcast_list_elem { 505 struct list_head link; 506 u8 *mac; 507}; 508 509union bnx2x_mcast_config_data { 510 u8 *mac; 511 u8 bin; /* used in a RESTORE flow */ 512}; 513 514struct bnx2x_mcast_ramrod_params { 515 struct bnx2x_mcast_obj *mcast_obj; 516 517 /* Relevant options are RAMROD_COMP_WAIT and RAMROD_DRV_CLR_ONLY */ 518 unsigned long ramrod_flags; 519 520 struct list_head mcast_list; /* list of struct bnx2x_mcast_list_elem */ 521 /** TODO: 522 * - rename it to macs_num. 523 * - Add a new command type for handling pending commands 524 * (remove "zero semantics"). 525 * 526 * Length of mcast_list. If zero and ADD_CONT command - post 527 * pending commands. 528 */ 529 int mcast_list_len; 530}; 531 532enum bnx2x_mcast_cmd { 533 BNX2X_MCAST_CMD_ADD, 534 BNX2X_MCAST_CMD_CONT, 535 BNX2X_MCAST_CMD_DEL, 536 BNX2X_MCAST_CMD_RESTORE, 537}; 538 539struct bnx2x_mcast_obj { 540 struct bnx2x_raw_obj raw; 541 542 union { 543 struct { 544 #define BNX2X_MCAST_BINS_NUM 256 545 #define BNX2X_MCAST_VEC_SZ (BNX2X_MCAST_BINS_NUM / 64) 546 u64 vec[BNX2X_MCAST_VEC_SZ]; 547 548 /** Number of BINs to clear. Should be updated 549 * immediately when a command arrives in order to 550 * properly create DEL commands. 551 */ 552 int num_bins_set; 553 } aprox_match; 554 555 struct { 556 struct list_head macs; 557 int num_macs_set; 558 } exact_match; 559 } registry; 560 561 /* Pending commands */ 562 struct list_head pending_cmds_head; 563 564 /* A state that is set in raw.pstate, when there are pending commands */ 565 int sched_state; 566 567 /* Maximal number of mcast MACs configured in one command */ 568 int max_cmd_len; 569 570 /* Total number of currently pending MACs to configure: both 571 * in the pending commands list and in the current command. 572 */ 573 int total_pending_num; 574 575 u8 engine_id; 576 577 /** 578 * @param cmd command to execute (BNX2X_MCAST_CMD_X, see above) 579 */ 580 int (*config_mcast)(struct bnx2x *bp, 581 struct bnx2x_mcast_ramrod_params *p, 582 enum bnx2x_mcast_cmd cmd); 583 584 /** 585 * Fills the ramrod data during the RESTORE flow. 586 * 587 * @param bp 588 * @param o 589 * @param start_idx Registry index to start from 590 * @param rdata_idx Index in the ramrod data to start from 591 * 592 * @return -1 if we handled the whole registry or index of the last 593 * handled registry element. 594 */ 595 int (*hdl_restore)(struct bnx2x *bp, struct bnx2x_mcast_obj *o, 596 int start_bin, int *rdata_idx); 597 598 int (*enqueue_cmd)(struct bnx2x *bp, struct bnx2x_mcast_obj *o, 599 struct bnx2x_mcast_ramrod_params *p, 600 enum bnx2x_mcast_cmd cmd); 601 602 void (*set_one_rule)(struct bnx2x *bp, 603 struct bnx2x_mcast_obj *o, int idx, 604 union bnx2x_mcast_config_data *cfg_data, 605 enum bnx2x_mcast_cmd cmd); 606 607 /** Checks if there are more mcast MACs to be set or a previous 608 * command is still pending. 609 */ 610 bool (*check_pending)(struct bnx2x_mcast_obj *o); 611 612 /** 613 * Set/Clear/Check SCHEDULED state of the object 614 */ 615 void (*set_sched)(struct bnx2x_mcast_obj *o); 616 void (*clear_sched)(struct bnx2x_mcast_obj *o); 617 bool (*check_sched)(struct bnx2x_mcast_obj *o); 618 619 /* Wait until all pending commands complete */ 620 int (*wait_comp)(struct bnx2x *bp, struct bnx2x_mcast_obj *o); 621 622 /** 623 * Handle the internal object counters needed for proper 624 * commands handling. Checks that the provided parameters are 625 * feasible. 626 */ 627 int (*validate)(struct bnx2x *bp, 628 struct bnx2x_mcast_ramrod_params *p, 629 enum bnx2x_mcast_cmd cmd); 630 631 /** 632 * Restore the values of internal counters in case of a failure. 633 */ 634 void (*revert)(struct bnx2x *bp, 635 struct bnx2x_mcast_ramrod_params *p, 636 int old_num_bins); 637 638 int (*get_registry_size)(struct bnx2x_mcast_obj *o); 639 void (*set_registry_size)(struct bnx2x_mcast_obj *o, int n); 640}; 641 642/*************************** Credit handling **********************************/ 643struct bnx2x_credit_pool_obj { 644 645 /* Current amount of credit in the pool */ 646 atomic_t credit; 647 648 /* Maximum allowed credit. put() will check against it. */ 649 int pool_sz; 650 651 /* Allocate a pool table statically. 652 * 653 * Currently the maximum allowed size is MAX_MAC_CREDIT_E2(272) 654 * 655 * The set bit in the table will mean that the entry is available. 656 */ 657#define BNX2X_POOL_VEC_SIZE (MAX_MAC_CREDIT_E2 / 64) 658 u64 pool_mirror[BNX2X_POOL_VEC_SIZE]; 659 660 /* Base pool offset (initialized differently */ 661 int base_pool_offset; 662 663 /** 664 * Get the next free pool entry. 665 * 666 * @return true if there was a free entry in the pool 667 */ 668 bool (*get_entry)(struct bnx2x_credit_pool_obj *o, int *entry); 669 670 /** 671 * Return the entry back to the pool. 672 * 673 * @return true if entry is legal and has been successfully 674 * returned to the pool. 675 */ 676 bool (*put_entry)(struct bnx2x_credit_pool_obj *o, int entry); 677 678 /** 679 * Get the requested amount of credit from the pool. 680 * 681 * @param cnt Amount of requested credit 682 * @return true if the operation is successful 683 */ 684 bool (*get)(struct bnx2x_credit_pool_obj *o, int cnt); 685 686 /** 687 * Returns the credit to the pool. 688 * 689 * @param cnt Amount of credit to return 690 * @return true if the operation is successful 691 */ 692 bool (*put)(struct bnx2x_credit_pool_obj *o, int cnt); 693 694 /** 695 * Reads the current amount of credit. 696 */ 697 int (*check)(struct bnx2x_credit_pool_obj *o); 698}; 699 700/*************************** RSS configuration ********************************/ 701enum { 702 /* RSS_MODE bits are mutually exclusive */ 703 BNX2X_RSS_MODE_DISABLED, 704 BNX2X_RSS_MODE_REGULAR, 705 706 BNX2X_RSS_SET_SRCH, /* Setup searcher, E1x specific flag */ 707 708 BNX2X_RSS_IPV4, 709 BNX2X_RSS_IPV4_TCP, 710 BNX2X_RSS_IPV4_UDP, 711 BNX2X_RSS_IPV6, 712 BNX2X_RSS_IPV6_TCP, 713 BNX2X_RSS_IPV6_UDP, 714 BNX2X_RSS_GRE_INNER_HDRS, 715}; 716 717struct bnx2x_config_rss_params { 718 struct bnx2x_rss_config_obj *rss_obj; 719 720 /* may have RAMROD_COMP_WAIT set only */ 721 unsigned long ramrod_flags; 722 723 /* BNX2X_RSS_X bits */ 724 unsigned long rss_flags; 725 726 /* Number hash bits to take into an account */ 727 u8 rss_result_mask; 728 729 /* Indirection table */ 730 u8 ind_table[T_ETH_INDIRECTION_TABLE_SIZE]; 731 732 /* RSS hash values */ 733 u32 rss_key[10]; 734 735 /* valid only iff BNX2X_RSS_UPDATE_TOE is set */ 736 u16 toe_rss_bitmap; 737}; 738 739struct bnx2x_rss_config_obj { 740 struct bnx2x_raw_obj raw; 741 742 /* RSS engine to use */ 743 u8 engine_id; 744 745 /* Last configured indirection table */ 746 u8 ind_table[T_ETH_INDIRECTION_TABLE_SIZE]; 747 748 /* flags for enabling 4-tupple hash on UDP */ 749 u8 udp_rss_v4; 750 u8 udp_rss_v6; 751 752 int (*config_rss)(struct bnx2x *bp, 753 struct bnx2x_config_rss_params *p); 754}; 755 756/*********************** Queue state update ***********************************/ 757 758/* UPDATE command options */ 759enum { 760 BNX2X_Q_UPDATE_IN_VLAN_REM, 761 BNX2X_Q_UPDATE_IN_VLAN_REM_CHNG, 762 BNX2X_Q_UPDATE_OUT_VLAN_REM, 763 BNX2X_Q_UPDATE_OUT_VLAN_REM_CHNG, 764 BNX2X_Q_UPDATE_ANTI_SPOOF, 765 BNX2X_Q_UPDATE_ANTI_SPOOF_CHNG, 766 BNX2X_Q_UPDATE_ACTIVATE, 767 BNX2X_Q_UPDATE_ACTIVATE_CHNG, 768 BNX2X_Q_UPDATE_DEF_VLAN_EN, 769 BNX2X_Q_UPDATE_DEF_VLAN_EN_CHNG, 770 BNX2X_Q_UPDATE_SILENT_VLAN_REM_CHNG, 771 BNX2X_Q_UPDATE_SILENT_VLAN_REM, 772 BNX2X_Q_UPDATE_TX_SWITCHING_CHNG, 773 BNX2X_Q_UPDATE_TX_SWITCHING, 774 BNX2X_Q_UPDATE_PTP_PKTS_CHNG, 775 BNX2X_Q_UPDATE_PTP_PKTS, 776}; 777 778/* Allowed Queue states */ 779enum bnx2x_q_state { 780 BNX2X_Q_STATE_RESET, 781 BNX2X_Q_STATE_INITIALIZED, 782 BNX2X_Q_STATE_ACTIVE, 783 BNX2X_Q_STATE_MULTI_COS, 784 BNX2X_Q_STATE_MCOS_TERMINATED, 785 BNX2X_Q_STATE_INACTIVE, 786 BNX2X_Q_STATE_STOPPED, 787 BNX2X_Q_STATE_TERMINATED, 788 BNX2X_Q_STATE_FLRED, 789 BNX2X_Q_STATE_MAX, 790}; 791 792/* Allowed Queue states */ 793enum bnx2x_q_logical_state { 794 BNX2X_Q_LOGICAL_STATE_ACTIVE, 795 BNX2X_Q_LOGICAL_STATE_STOPPED, 796}; 797 798/* Allowed commands */ 799enum bnx2x_queue_cmd { 800 BNX2X_Q_CMD_INIT, 801 BNX2X_Q_CMD_SETUP, 802 BNX2X_Q_CMD_SETUP_TX_ONLY, 803 BNX2X_Q_CMD_DEACTIVATE, 804 BNX2X_Q_CMD_ACTIVATE, 805 BNX2X_Q_CMD_UPDATE, 806 BNX2X_Q_CMD_UPDATE_TPA, 807 BNX2X_Q_CMD_HALT, 808 BNX2X_Q_CMD_CFC_DEL, 809 BNX2X_Q_CMD_TERMINATE, 810 BNX2X_Q_CMD_EMPTY, 811 BNX2X_Q_CMD_MAX, 812}; 813 814/* queue SETUP + INIT flags */ 815enum { 816 BNX2X_Q_FLG_TPA, 817 BNX2X_Q_FLG_TPA_IPV6, 818 BNX2X_Q_FLG_TPA_GRO, 819 BNX2X_Q_FLG_STATS, 820 BNX2X_Q_FLG_ZERO_STATS, 821 BNX2X_Q_FLG_ACTIVE, 822 BNX2X_Q_FLG_OV, 823 BNX2X_Q_FLG_VLAN, 824 BNX2X_Q_FLG_COS, 825 BNX2X_Q_FLG_HC, 826 BNX2X_Q_FLG_HC_EN, 827 BNX2X_Q_FLG_DHC, 828 BNX2X_Q_FLG_FCOE, 829 BNX2X_Q_FLG_LEADING_RSS, 830 BNX2X_Q_FLG_MCAST, 831 BNX2X_Q_FLG_DEF_VLAN, 832 BNX2X_Q_FLG_TX_SWITCH, 833 BNX2X_Q_FLG_TX_SEC, 834 BNX2X_Q_FLG_ANTI_SPOOF, 835 BNX2X_Q_FLG_SILENT_VLAN_REM, 836 BNX2X_Q_FLG_FORCE_DEFAULT_PRI, 837 BNX2X_Q_FLG_REFUSE_OUTBAND_VLAN, 838 BNX2X_Q_FLG_PCSUM_ON_PKT, 839 BNX2X_Q_FLG_TUN_INC_INNER_IP_ID 840}; 841 842/* Queue type options: queue type may be a combination of below. */ 843enum bnx2x_q_type { 844 /** TODO: Consider moving both these flags into the init() 845 * ramrod params. 846 */ 847 BNX2X_Q_TYPE_HAS_RX, 848 BNX2X_Q_TYPE_HAS_TX, 849}; 850 851#define BNX2X_PRIMARY_CID_INDEX 0 852#define BNX2X_MULTI_TX_COS_E1X 3 /* QM only */ 853#define BNX2X_MULTI_TX_COS_E2_E3A0 2 854#define BNX2X_MULTI_TX_COS_E3B0 3 855#define BNX2X_MULTI_TX_COS 3 /* Maximum possible */ 856 857#define MAC_PAD (ALIGN(ETH_ALEN, sizeof(u32)) - ETH_ALEN) 858/* DMAE channel to be used by FW for timesync workaroun. A driver that sends 859 * timesync-related ramrods must not use this DMAE command ID. 860 */ 861#define FW_DMAE_CMD_ID 6 862 863struct bnx2x_queue_init_params { 864 struct { 865 unsigned long flags; 866 u16 hc_rate; 867 u8 fw_sb_id; 868 u8 sb_cq_index; 869 } tx; 870 871 struct { 872 unsigned long flags; 873 u16 hc_rate; 874 u8 fw_sb_id; 875 u8 sb_cq_index; 876 } rx; 877 878 /* CID context in the host memory */ 879 struct eth_context *cxts[BNX2X_MULTI_TX_COS]; 880 881 /* maximum number of cos supported by hardware */ 882 u8 max_cos; 883}; 884 885struct bnx2x_queue_terminate_params { 886 /* index within the tx_only cids of this queue object */ 887 u8 cid_index; 888}; 889 890struct bnx2x_queue_cfc_del_params { 891 /* index within the tx_only cids of this queue object */ 892 u8 cid_index; 893}; 894 895struct bnx2x_queue_update_params { 896 unsigned long update_flags; /* BNX2X_Q_UPDATE_XX bits */ 897 u16 def_vlan; 898 u16 silent_removal_value; 899 u16 silent_removal_mask; 900/* index within the tx_only cids of this queue object */ 901 u8 cid_index; 902}; 903 904struct bnx2x_queue_update_tpa_params { 905 dma_addr_t sge_map; 906 u8 update_ipv4; 907 u8 update_ipv6; 908 u8 max_tpa_queues; 909 u8 max_sges_pkt; 910 u8 complete_on_both_clients; 911 u8 dont_verify_thr; 912 u8 tpa_mode; 913 u8 _pad; 914 915 u16 sge_buff_sz; 916 u16 max_agg_sz; 917 918 u16 sge_pause_thr_low; 919 u16 sge_pause_thr_high; 920}; 921 922struct rxq_pause_params { 923 u16 bd_th_lo; 924 u16 bd_th_hi; 925 u16 rcq_th_lo; 926 u16 rcq_th_hi; 927 u16 sge_th_lo; /* valid iff BNX2X_Q_FLG_TPA */ 928 u16 sge_th_hi; /* valid iff BNX2X_Q_FLG_TPA */ 929 u16 pri_map; 930}; 931 932/* general */ 933struct bnx2x_general_setup_params { 934 /* valid iff BNX2X_Q_FLG_STATS */ 935 u8 stat_id; 936 937 u8 spcl_id; 938 u16 mtu; 939 u8 cos; 940}; 941 942struct bnx2x_rxq_setup_params { 943 /* dma */ 944 dma_addr_t dscr_map; 945 dma_addr_t sge_map; 946 dma_addr_t rcq_map; 947 dma_addr_t rcq_np_map; 948 949 u16 drop_flags; 950 u16 buf_sz; 951 u8 fw_sb_id; 952 u8 cl_qzone_id; 953 954 /* valid iff BNX2X_Q_FLG_TPA */ 955 u16 tpa_agg_sz; 956 u16 sge_buf_sz; 957 u8 max_sges_pkt; 958 u8 max_tpa_queues; 959 u8 rss_engine_id; 960 961 /* valid iff BNX2X_Q_FLG_MCAST */ 962 u8 mcast_engine_id; 963 964 u8 cache_line_log; 965 966 u8 sb_cq_index; 967 968 /* valid iff BXN2X_Q_FLG_SILENT_VLAN_REM */ 969 u16 silent_removal_value; 970 u16 silent_removal_mask; 971}; 972 973struct bnx2x_txq_setup_params { 974 /* dma */ 975 dma_addr_t dscr_map; 976 977 u8 fw_sb_id; 978 u8 sb_cq_index; 979 u8 cos; /* valid iff BNX2X_Q_FLG_COS */ 980 u16 traffic_type; 981 /* equals to the leading rss client id, used for TX classification*/ 982 u8 tss_leading_cl_id; 983 984 /* valid iff BNX2X_Q_FLG_DEF_VLAN */ 985 u16 default_vlan; 986}; 987 988struct bnx2x_queue_setup_params { 989 struct bnx2x_general_setup_params gen_params; 990 struct bnx2x_txq_setup_params txq_params; 991 struct bnx2x_rxq_setup_params rxq_params; 992 struct rxq_pause_params pause_params; 993 unsigned long flags; 994}; 995 996struct bnx2x_queue_setup_tx_only_params { 997 struct bnx2x_general_setup_params gen_params; 998 struct bnx2x_txq_setup_params txq_params; 999 unsigned long flags; 1000 /* index within the tx_only cids of this queue object */ 1001 u8 cid_index; 1002}; 1003 1004struct bnx2x_queue_state_params { 1005 struct bnx2x_queue_sp_obj *q_obj; 1006 1007 /* Current command */ 1008 enum bnx2x_queue_cmd cmd; 1009 1010 /* may have RAMROD_COMP_WAIT set only */ 1011 unsigned long ramrod_flags; 1012 1013 /* Params according to the current command */ 1014 union { 1015 struct bnx2x_queue_update_params update; 1016 struct bnx2x_queue_update_tpa_params update_tpa; 1017 struct bnx2x_queue_setup_params setup; 1018 struct bnx2x_queue_init_params init; 1019 struct bnx2x_queue_setup_tx_only_params tx_only; 1020 struct bnx2x_queue_terminate_params terminate; 1021 struct bnx2x_queue_cfc_del_params cfc_del; 1022 } params; 1023}; 1024 1025struct bnx2x_viflist_params { 1026 u8 echo_res; 1027 u8 func_bit_map_res; 1028}; 1029 1030struct bnx2x_queue_sp_obj { 1031 u32 cids[BNX2X_MULTI_TX_COS]; 1032 u8 cl_id; 1033 u8 func_id; 1034 1035 /* number of traffic classes supported by queue. 1036 * The primary connection of the queue supports the first traffic 1037 * class. Any further traffic class is supported by a tx-only 1038 * connection. 1039 * 1040 * Therefore max_cos is also a number of valid entries in the cids 1041 * array. 1042 */ 1043 u8 max_cos; 1044 u8 num_tx_only, next_tx_only; 1045 1046 enum bnx2x_q_state state, next_state; 1047 1048 /* bits from enum bnx2x_q_type */ 1049 unsigned long type; 1050 1051 /* BNX2X_Q_CMD_XX bits. This object implements "one 1052 * pending" paradigm but for debug and tracing purposes it's 1053 * more convenient to have different bits for different 1054 * commands. 1055 */ 1056 unsigned long pending; 1057 1058 /* Buffer to use as a ramrod data and its mapping */ 1059 void *rdata; 1060 dma_addr_t rdata_mapping; 1061 1062 /** 1063 * Performs one state change according to the given parameters. 1064 * 1065 * @return 0 in case of success and negative value otherwise. 1066 */ 1067 int (*send_cmd)(struct bnx2x *bp, 1068 struct bnx2x_queue_state_params *params); 1069 1070 /** 1071 * Sets the pending bit according to the requested transition. 1072 */ 1073 int (*set_pending)(struct bnx2x_queue_sp_obj *o, 1074 struct bnx2x_queue_state_params *params); 1075 1076 /** 1077 * Checks that the requested state transition is legal. 1078 */ 1079 int (*check_transition)(struct bnx2x *bp, 1080 struct bnx2x_queue_sp_obj *o, 1081 struct bnx2x_queue_state_params *params); 1082 1083 /** 1084 * Completes the pending command. 1085 */ 1086 int (*complete_cmd)(struct bnx2x *bp, 1087 struct bnx2x_queue_sp_obj *o, 1088 enum bnx2x_queue_cmd); 1089 1090 int (*wait_comp)(struct bnx2x *bp, 1091 struct bnx2x_queue_sp_obj *o, 1092 enum bnx2x_queue_cmd cmd); 1093}; 1094 1095/********************** Function state update *********************************/ 1096 1097/* UPDATE command options */ 1098enum { 1099 BNX2X_F_UPDATE_TX_SWITCH_SUSPEND_CHNG, 1100 BNX2X_F_UPDATE_TX_SWITCH_SUSPEND, 1101 BNX2X_F_UPDATE_SD_VLAN_TAG_CHNG, 1102 BNX2X_F_UPDATE_SD_VLAN_ETH_TYPE_CHNG, 1103 BNX2X_F_UPDATE_VLAN_FORCE_PRIO_CHNG, 1104 BNX2X_F_UPDATE_VLAN_FORCE_PRIO_FLAG, 1105 BNX2X_F_UPDATE_TUNNEL_CFG_CHNG, 1106 BNX2X_F_UPDATE_TUNNEL_CLSS_EN, 1107 BNX2X_F_UPDATE_TUNNEL_INNER_GRE_RSS_EN, 1108}; 1109 1110/* Allowed Function states */ 1111enum bnx2x_func_state { 1112 BNX2X_F_STATE_RESET, 1113 BNX2X_F_STATE_INITIALIZED, 1114 BNX2X_F_STATE_STARTED, 1115 BNX2X_F_STATE_TX_STOPPED, 1116 BNX2X_F_STATE_MAX, 1117}; 1118 1119/* Allowed Function commands */ 1120enum bnx2x_func_cmd { 1121 BNX2X_F_CMD_HW_INIT, 1122 BNX2X_F_CMD_START, 1123 BNX2X_F_CMD_STOP, 1124 BNX2X_F_CMD_HW_RESET, 1125 BNX2X_F_CMD_AFEX_UPDATE, 1126 BNX2X_F_CMD_AFEX_VIFLISTS, 1127 BNX2X_F_CMD_TX_STOP, 1128 BNX2X_F_CMD_TX_START, 1129 BNX2X_F_CMD_SWITCH_UPDATE, 1130 BNX2X_F_CMD_SET_TIMESYNC, 1131 BNX2X_F_CMD_MAX, 1132}; 1133 1134struct bnx2x_func_hw_init_params { 1135 /* A load phase returned by MCP. 1136 * 1137 * May be: 1138 * FW_MSG_CODE_DRV_LOAD_COMMON_CHIP 1139 * FW_MSG_CODE_DRV_LOAD_COMMON 1140 * FW_MSG_CODE_DRV_LOAD_PORT 1141 * FW_MSG_CODE_DRV_LOAD_FUNCTION 1142 */ 1143 u32 load_phase; 1144}; 1145 1146struct bnx2x_func_hw_reset_params { 1147 /* A load phase returned by MCP. 1148 * 1149 * May be: 1150 * FW_MSG_CODE_DRV_LOAD_COMMON_CHIP 1151 * FW_MSG_CODE_DRV_LOAD_COMMON 1152 * FW_MSG_CODE_DRV_LOAD_PORT 1153 * FW_MSG_CODE_DRV_LOAD_FUNCTION 1154 */ 1155 u32 reset_phase; 1156}; 1157 1158struct bnx2x_func_start_params { 1159 /* Multi Function mode: 1160 * - Single Function 1161 * - Switch Dependent 1162 * - Switch Independent 1163 */ 1164 u16 mf_mode; 1165 1166 /* Switch Dependent mode outer VLAN tag */ 1167 u16 sd_vlan_tag; 1168 1169 /* Function cos mode */ 1170 u8 network_cos_mode; 1171 1172 /* TUNN_MODE_NONE/TUNN_MODE_VXLAN/TUNN_MODE_GRE */ 1173 u8 tunnel_mode; 1174 1175 /* tunneling classification enablement */ 1176 u8 tunn_clss_en; 1177 1178 /* NVGRE_TUNNEL/L2GRE_TUNNEL/IPGRE_TUNNEL */ 1179 u8 gre_tunnel_type; 1180 1181 /* Enables Inner GRE RSS on the function, depends on the client RSS 1182 * capailities 1183 */ 1184 u8 inner_gre_rss_en; 1185 1186 /* Allows accepting of packets failing MF classification, possibly 1187 * only matching a given ethertype 1188 */ 1189 u8 class_fail; 1190 u16 class_fail_ethtype; 1191 1192 /* Override priority of output packets */ 1193 u8 sd_vlan_force_pri; 1194 u8 sd_vlan_force_pri_val; 1195 1196 /* Replace vlan's ethertype */ 1197 u16 sd_vlan_eth_type; 1198 1199 /* Prevent inner vlans from being added by FW */ 1200 u8 no_added_tags; 1201}; 1202 1203struct bnx2x_func_switch_update_params { 1204 unsigned long changes; /* BNX2X_F_UPDATE_XX bits */ 1205 u16 vlan; 1206 u16 vlan_eth_type; 1207 u8 vlan_force_prio; 1208 u8 tunnel_mode; 1209 u8 gre_tunnel_type; 1210}; 1211 1212struct bnx2x_func_afex_update_params { 1213 u16 vif_id; 1214 u16 afex_default_vlan; 1215 u8 allowed_priorities; 1216}; 1217 1218struct bnx2x_func_afex_viflists_params { 1219 u16 vif_list_index; 1220 u8 func_bit_map; 1221 u8 afex_vif_list_command; 1222 u8 func_to_clear; 1223}; 1224 1225struct bnx2x_func_tx_start_params { 1226 struct priority_cos traffic_type_to_priority_cos[MAX_TRAFFIC_TYPES]; 1227 u8 dcb_enabled; 1228 u8 dcb_version; 1229 u8 dont_add_pri_0_en; 1230}; 1231 1232struct bnx2x_func_set_timesync_params { 1233 /* Reset, set or keep the current drift value */ 1234 u8 drift_adjust_cmd; 1235 1236 /* Dec, inc or keep the current offset */ 1237 u8 offset_cmd; 1238 1239 /* Drift value direction */ 1240 u8 add_sub_drift_adjust_value; 1241 1242 /* Drift, period and offset values to be used according to the commands 1243 * above. 1244 */ 1245 u8 drift_adjust_value; 1246 u32 drift_adjust_period; 1247 u64 offset_delta; 1248}; 1249 1250struct bnx2x_func_state_params { 1251 struct bnx2x_func_sp_obj *f_obj; 1252 1253 /* Current command */ 1254 enum bnx2x_func_cmd cmd; 1255 1256 /* may have RAMROD_COMP_WAIT set only */ 1257 unsigned long ramrod_flags; 1258 1259 /* Params according to the current command */ 1260 union { 1261 struct bnx2x_func_hw_init_params hw_init; 1262 struct bnx2x_func_hw_reset_params hw_reset; 1263 struct bnx2x_func_start_params start; 1264 struct bnx2x_func_switch_update_params switch_update; 1265 struct bnx2x_func_afex_update_params afex_update; 1266 struct bnx2x_func_afex_viflists_params afex_viflists; 1267 struct bnx2x_func_tx_start_params tx_start; 1268 struct bnx2x_func_set_timesync_params set_timesync; 1269 } params; 1270}; 1271 1272struct bnx2x_func_sp_drv_ops { 1273 /* Init tool + runtime initialization: 1274 * - Common Chip 1275 * - Common (per Path) 1276 * - Port 1277 * - Function phases 1278 */ 1279 int (*init_hw_cmn_chip)(struct bnx2x *bp); 1280 int (*init_hw_cmn)(struct bnx2x *bp); 1281 int (*init_hw_port)(struct bnx2x *bp); 1282 int (*init_hw_func)(struct bnx2x *bp); 1283 1284 /* Reset Function HW: Common, Port, Function phases. */ 1285 void (*reset_hw_cmn)(struct bnx2x *bp); 1286 void (*reset_hw_port)(struct bnx2x *bp); 1287 void (*reset_hw_func)(struct bnx2x *bp); 1288 1289 /* Init/Free GUNZIP resources */ 1290 int (*gunzip_init)(struct bnx2x *bp); 1291 void (*gunzip_end)(struct bnx2x *bp); 1292 1293 /* Prepare/Release FW resources */ 1294 int (*init_fw)(struct bnx2x *bp); 1295 void (*release_fw)(struct bnx2x *bp); 1296}; 1297 1298struct bnx2x_func_sp_obj { 1299 enum bnx2x_func_state state, next_state; 1300 1301 /* BNX2X_FUNC_CMD_XX bits. This object implements "one 1302 * pending" paradigm but for debug and tracing purposes it's 1303 * more convenient to have different bits for different 1304 * commands. 1305 */ 1306 unsigned long pending; 1307 1308 /* Buffer to use as a ramrod data and its mapping */ 1309 void *rdata; 1310 dma_addr_t rdata_mapping; 1311 1312 /* Buffer to use as a afex ramrod data and its mapping. 1313 * This can't be same rdata as above because afex ramrod requests 1314 * can arrive to the object in parallel to other ramrod requests. 1315 */ 1316 void *afex_rdata; 1317 dma_addr_t afex_rdata_mapping; 1318 1319 /* this mutex validates that when pending flag is taken, the next 1320 * ramrod to be sent will be the one set the pending bit 1321 */ 1322 struct mutex one_pending_mutex; 1323 1324 /* Driver interface */ 1325 struct bnx2x_func_sp_drv_ops *drv; 1326 1327 /** 1328 * Performs one state change according to the given parameters. 1329 * 1330 * @return 0 in case of success and negative value otherwise. 1331 */ 1332 int (*send_cmd)(struct bnx2x *bp, 1333 struct bnx2x_func_state_params *params); 1334 1335 /** 1336 * Checks that the requested state transition is legal. 1337 */ 1338 int (*check_transition)(struct bnx2x *bp, 1339 struct bnx2x_func_sp_obj *o, 1340 struct bnx2x_func_state_params *params); 1341 1342 /** 1343 * Completes the pending command. 1344 */ 1345 int (*complete_cmd)(struct bnx2x *bp, 1346 struct bnx2x_func_sp_obj *o, 1347 enum bnx2x_func_cmd cmd); 1348 1349 int (*wait_comp)(struct bnx2x *bp, struct bnx2x_func_sp_obj *o, 1350 enum bnx2x_func_cmd cmd); 1351}; 1352 1353/********************** Interfaces ********************************************/ 1354/* Queueable objects set */ 1355union bnx2x_qable_obj { 1356 struct bnx2x_vlan_mac_obj vlan_mac; 1357}; 1358/************** Function state update *********/ 1359void bnx2x_init_func_obj(struct bnx2x *bp, 1360 struct bnx2x_func_sp_obj *obj, 1361 void *rdata, dma_addr_t rdata_mapping, 1362 void *afex_rdata, dma_addr_t afex_rdata_mapping, 1363 struct bnx2x_func_sp_drv_ops *drv_iface); 1364 1365int bnx2x_func_state_change(struct bnx2x *bp, 1366 struct bnx2x_func_state_params *params); 1367 1368enum bnx2x_func_state bnx2x_func_get_state(struct bnx2x *bp, 1369 struct bnx2x_func_sp_obj *o); 1370/******************* Queue State **************/ 1371void bnx2x_init_queue_obj(struct bnx2x *bp, 1372 struct bnx2x_queue_sp_obj *obj, u8 cl_id, u32 *cids, 1373 u8 cid_cnt, u8 func_id, void *rdata, 1374 dma_addr_t rdata_mapping, unsigned long type); 1375 1376int bnx2x_queue_state_change(struct bnx2x *bp, 1377 struct bnx2x_queue_state_params *params); 1378 1379int bnx2x_get_q_logical_state(struct bnx2x *bp, 1380 struct bnx2x_queue_sp_obj *obj); 1381 1382/********************* VLAN-MAC ****************/ 1383void bnx2x_init_mac_obj(struct bnx2x *bp, 1384 struct bnx2x_vlan_mac_obj *mac_obj, 1385 u8 cl_id, u32 cid, u8 func_id, void *rdata, 1386 dma_addr_t rdata_mapping, int state, 1387 unsigned long *pstate, bnx2x_obj_type type, 1388 struct bnx2x_credit_pool_obj *macs_pool); 1389 1390void bnx2x_init_vlan_obj(struct bnx2x *bp, 1391 struct bnx2x_vlan_mac_obj *vlan_obj, 1392 u8 cl_id, u32 cid, u8 func_id, void *rdata, 1393 dma_addr_t rdata_mapping, int state, 1394 unsigned long *pstate, bnx2x_obj_type type, 1395 struct bnx2x_credit_pool_obj *vlans_pool); 1396 1397int bnx2x_vlan_mac_h_read_lock(struct bnx2x *bp, 1398 struct bnx2x_vlan_mac_obj *o); 1399void bnx2x_vlan_mac_h_read_unlock(struct bnx2x *bp, 1400 struct bnx2x_vlan_mac_obj *o); 1401int bnx2x_vlan_mac_h_write_lock(struct bnx2x *bp, 1402 struct bnx2x_vlan_mac_obj *o); 1403int bnx2x_config_vlan_mac(struct bnx2x *bp, 1404 struct bnx2x_vlan_mac_ramrod_params *p); 1405 1406int bnx2x_vlan_mac_move(struct bnx2x *bp, 1407 struct bnx2x_vlan_mac_ramrod_params *p, 1408 struct bnx2x_vlan_mac_obj *dest_o); 1409 1410/********************* RX MODE ****************/ 1411 1412void bnx2x_init_rx_mode_obj(struct bnx2x *bp, 1413 struct bnx2x_rx_mode_obj *o); 1414 1415/** 1416 * bnx2x_config_rx_mode - Send and RX_MODE ramrod according to the provided parameters. 1417 * 1418 * @p: Command parameters 1419 * 1420 * Return: 0 - if operation was successful and there is no pending completions, 1421 * positive number - if there are pending completions, 1422 * negative - if there were errors 1423 */ 1424int bnx2x_config_rx_mode(struct bnx2x *bp, 1425 struct bnx2x_rx_mode_ramrod_params *p); 1426 1427/****************** MULTICASTS ****************/ 1428 1429void bnx2x_init_mcast_obj(struct bnx2x *bp, 1430 struct bnx2x_mcast_obj *mcast_obj, 1431 u8 mcast_cl_id, u32 mcast_cid, u8 func_id, 1432 u8 engine_id, void *rdata, dma_addr_t rdata_mapping, 1433 int state, unsigned long *pstate, 1434 bnx2x_obj_type type); 1435 1436/** 1437 * bnx2x_config_mcast - Configure multicast MACs list. 1438 * 1439 * @cmd: command to execute: BNX2X_MCAST_CMD_X 1440 * 1441 * May configure a new list 1442 * provided in p->mcast_list (BNX2X_MCAST_CMD_ADD), clean up 1443 * (BNX2X_MCAST_CMD_DEL) or restore (BNX2X_MCAST_CMD_RESTORE) a current 1444 * configuration, continue to execute the pending commands 1445 * (BNX2X_MCAST_CMD_CONT). 1446 * 1447 * If previous command is still pending or if number of MACs to 1448 * configure is more that maximum number of MACs in one command, 1449 * the current command will be enqueued to the tail of the 1450 * pending commands list. 1451 * 1452 * Return: 0 is operation was successful and there are no pending completions, 1453 * negative if there were errors, positive if there are pending 1454 * completions. 1455 */ 1456int bnx2x_config_mcast(struct bnx2x *bp, 1457 struct bnx2x_mcast_ramrod_params *p, 1458 enum bnx2x_mcast_cmd cmd); 1459 1460/****************** CREDIT POOL ****************/ 1461void bnx2x_init_mac_credit_pool(struct bnx2x *bp, 1462 struct bnx2x_credit_pool_obj *p, u8 func_id, 1463 u8 func_num); 1464void bnx2x_init_vlan_credit_pool(struct bnx2x *bp, 1465 struct bnx2x_credit_pool_obj *p, u8 func_id, 1466 u8 func_num); 1467 1468/****************** RSS CONFIGURATION ****************/ 1469void bnx2x_init_rss_config_obj(struct bnx2x *bp, 1470 struct bnx2x_rss_config_obj *rss_obj, 1471 u8 cl_id, u32 cid, u8 func_id, u8 engine_id, 1472 void *rdata, dma_addr_t rdata_mapping, 1473 int state, unsigned long *pstate, 1474 bnx2x_obj_type type); 1475 1476/** 1477 * bnx2x_config_rss - Updates RSS configuration according to provided parameters 1478 * 1479 * Return: 0 in case of success 1480 */ 1481int bnx2x_config_rss(struct bnx2x *bp, 1482 struct bnx2x_config_rss_params *p); 1483 1484/** 1485 * bnx2x_get_rss_ind_table - Return the current ind_table configuration. 1486 * 1487 * @ind_table: buffer to fill with the current indirection 1488 * table content. Should be at least 1489 * T_ETH_INDIRECTION_TABLE_SIZE bytes long. 1490 */ 1491void bnx2x_get_rss_ind_table(struct bnx2x_rss_config_obj *rss_obj, 1492 u8 *ind_table); 1493 1494#endif /* BNX2X_SP_VERBS */ 1495