sb1250-mac.c revision 0ab75ae81da249988bf3c7a38e0a48d4b9be1e0c
1/* 2 * Copyright (C) 2001,2002,2003,2004 Broadcom Corporation 3 * Copyright (c) 2006, 2007 Maciej W. Rozycki 4 * 5 * This program is free software; you can redistribute it and/or 6 * modify it under the terms of the GNU General Public License 7 * as published by the Free Software Foundation; either version 2 8 * of the License, or (at your option) any later version. 9 * 10 * This program is distributed in the hope that it will be useful, 11 * but WITHOUT ANY WARRANTY; without even the implied warranty of 12 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 13 * GNU General Public License for more details. 14 * 15 * You should have received a copy of the GNU General Public License 16 * along with this program; if not, see <http://www.gnu.org/licenses/>. 17 * 18 * 19 * This driver is designed for the Broadcom SiByte SOC built-in 20 * Ethernet controllers. Written by Mitch Lichtenberg at Broadcom Corp. 21 * 22 * Updated to the driver model and the PHY abstraction layer 23 * by Maciej W. Rozycki. 24 */ 25 26#include <linux/bug.h> 27#include <linux/module.h> 28#include <linux/kernel.h> 29#include <linux/string.h> 30#include <linux/timer.h> 31#include <linux/errno.h> 32#include <linux/ioport.h> 33#include <linux/slab.h> 34#include <linux/interrupt.h> 35#include <linux/netdevice.h> 36#include <linux/etherdevice.h> 37#include <linux/skbuff.h> 38#include <linux/init.h> 39#include <linux/bitops.h> 40#include <linux/err.h> 41#include <linux/ethtool.h> 42#include <linux/mii.h> 43#include <linux/phy.h> 44#include <linux/platform_device.h> 45#include <linux/prefetch.h> 46 47#include <asm/cache.h> 48#include <asm/io.h> 49#include <asm/processor.h> /* Processor type for cache alignment. */ 50 51/* Operational parameters that usually are not changed. */ 52 53#define CONFIG_SBMAC_COALESCE 54 55/* Time in jiffies before concluding the transmitter is hung. */ 56#define TX_TIMEOUT (2*HZ) 57 58 59MODULE_AUTHOR("Mitch Lichtenberg (Broadcom Corp.)"); 60MODULE_DESCRIPTION("Broadcom SiByte SOC GB Ethernet driver"); 61 62/* A few user-configurable values which may be modified when a driver 63 module is loaded. */ 64 65/* 1 normal messages, 0 quiet .. 7 verbose. */ 66static int debug = 1; 67module_param(debug, int, S_IRUGO); 68MODULE_PARM_DESC(debug, "Debug messages"); 69 70#ifdef CONFIG_SBMAC_COALESCE 71static int int_pktcnt_tx = 255; 72module_param(int_pktcnt_tx, int, S_IRUGO); 73MODULE_PARM_DESC(int_pktcnt_tx, "TX packet count"); 74 75static int int_timeout_tx = 255; 76module_param(int_timeout_tx, int, S_IRUGO); 77MODULE_PARM_DESC(int_timeout_tx, "TX timeout value"); 78 79static int int_pktcnt_rx = 64; 80module_param(int_pktcnt_rx, int, S_IRUGO); 81MODULE_PARM_DESC(int_pktcnt_rx, "RX packet count"); 82 83static int int_timeout_rx = 64; 84module_param(int_timeout_rx, int, S_IRUGO); 85MODULE_PARM_DESC(int_timeout_rx, "RX timeout value"); 86#endif 87 88#include <asm/sibyte/board.h> 89#include <asm/sibyte/sb1250.h> 90#if defined(CONFIG_SIBYTE_BCM1x55) || defined(CONFIG_SIBYTE_BCM1x80) 91#include <asm/sibyte/bcm1480_regs.h> 92#include <asm/sibyte/bcm1480_int.h> 93#define R_MAC_DMA_OODPKTLOST_RX R_MAC_DMA_OODPKTLOST 94#elif defined(CONFIG_SIBYTE_SB1250) || defined(CONFIG_SIBYTE_BCM112X) 95#include <asm/sibyte/sb1250_regs.h> 96#include <asm/sibyte/sb1250_int.h> 97#else 98#error invalid SiByte MAC configuration 99#endif 100#include <asm/sibyte/sb1250_scd.h> 101#include <asm/sibyte/sb1250_mac.h> 102#include <asm/sibyte/sb1250_dma.h> 103 104#if defined(CONFIG_SIBYTE_BCM1x55) || defined(CONFIG_SIBYTE_BCM1x80) 105#define UNIT_INT(n) (K_BCM1480_INT_MAC_0 + ((n) * 2)) 106#elif defined(CONFIG_SIBYTE_SB1250) || defined(CONFIG_SIBYTE_BCM112X) 107#define UNIT_INT(n) (K_INT_MAC_0 + (n)) 108#else 109#error invalid SiByte MAC configuration 110#endif 111 112#ifdef K_INT_PHY 113#define SBMAC_PHY_INT K_INT_PHY 114#else 115#define SBMAC_PHY_INT PHY_POLL 116#endif 117 118/********************************************************************** 119 * Simple types 120 ********************************************************************* */ 121 122enum sbmac_speed { 123 sbmac_speed_none = 0, 124 sbmac_speed_10 = SPEED_10, 125 sbmac_speed_100 = SPEED_100, 126 sbmac_speed_1000 = SPEED_1000, 127}; 128 129enum sbmac_duplex { 130 sbmac_duplex_none = -1, 131 sbmac_duplex_half = DUPLEX_HALF, 132 sbmac_duplex_full = DUPLEX_FULL, 133}; 134 135enum sbmac_fc { 136 sbmac_fc_none, 137 sbmac_fc_disabled, 138 sbmac_fc_frame, 139 sbmac_fc_collision, 140 sbmac_fc_carrier, 141}; 142 143enum sbmac_state { 144 sbmac_state_uninit, 145 sbmac_state_off, 146 sbmac_state_on, 147 sbmac_state_broken, 148}; 149 150 151/********************************************************************** 152 * Macros 153 ********************************************************************* */ 154 155 156#define SBDMA_NEXTBUF(d,f) ((((d)->f+1) == (d)->sbdma_dscrtable_end) ? \ 157 (d)->sbdma_dscrtable : (d)->f+1) 158 159 160#define NUMCACHEBLKS(x) (((x)+SMP_CACHE_BYTES-1)/SMP_CACHE_BYTES) 161 162#define SBMAC_MAX_TXDESCR 256 163#define SBMAC_MAX_RXDESCR 256 164 165#define ENET_PACKET_SIZE 1518 166/*#define ENET_PACKET_SIZE 9216 */ 167 168/********************************************************************** 169 * DMA Descriptor structure 170 ********************************************************************* */ 171 172struct sbdmadscr { 173 uint64_t dscr_a; 174 uint64_t dscr_b; 175}; 176 177/********************************************************************** 178 * DMA Controller structure 179 ********************************************************************* */ 180 181struct sbmacdma { 182 183 /* 184 * This stuff is used to identify the channel and the registers 185 * associated with it. 186 */ 187 struct sbmac_softc *sbdma_eth; /* back pointer to associated 188 MAC */ 189 int sbdma_channel; /* channel number */ 190 int sbdma_txdir; /* direction (1=transmit) */ 191 int sbdma_maxdescr; /* total # of descriptors 192 in ring */ 193#ifdef CONFIG_SBMAC_COALESCE 194 int sbdma_int_pktcnt; 195 /* # descriptors rx/tx 196 before interrupt */ 197 int sbdma_int_timeout; 198 /* # usec rx/tx interrupt */ 199#endif 200 void __iomem *sbdma_config0; /* DMA config register 0 */ 201 void __iomem *sbdma_config1; /* DMA config register 1 */ 202 void __iomem *sbdma_dscrbase; 203 /* descriptor base address */ 204 void __iomem *sbdma_dscrcnt; /* descriptor count register */ 205 void __iomem *sbdma_curdscr; /* current descriptor 206 address */ 207 void __iomem *sbdma_oodpktlost; 208 /* pkt drop (rx only) */ 209 210 /* 211 * This stuff is for maintenance of the ring 212 */ 213 void *sbdma_dscrtable_unaligned; 214 struct sbdmadscr *sbdma_dscrtable; 215 /* base of descriptor table */ 216 struct sbdmadscr *sbdma_dscrtable_end; 217 /* end of descriptor table */ 218 struct sk_buff **sbdma_ctxtable; 219 /* context table, one 220 per descr */ 221 dma_addr_t sbdma_dscrtable_phys; 222 /* and also the phys addr */ 223 struct sbdmadscr *sbdma_addptr; /* next dscr for sw to add */ 224 struct sbdmadscr *sbdma_remptr; /* next dscr for sw 225 to remove */ 226}; 227 228 229/********************************************************************** 230 * Ethernet softc structure 231 ********************************************************************* */ 232 233struct sbmac_softc { 234 235 /* 236 * Linux-specific things 237 */ 238 struct net_device *sbm_dev; /* pointer to linux device */ 239 struct napi_struct napi; 240 struct phy_device *phy_dev; /* the associated PHY device */ 241 struct mii_bus *mii_bus; /* the MII bus */ 242 int phy_irq[PHY_MAX_ADDR]; 243 spinlock_t sbm_lock; /* spin lock */ 244 int sbm_devflags; /* current device flags */ 245 246 /* 247 * Controller-specific things 248 */ 249 void __iomem *sbm_base; /* MAC's base address */ 250 enum sbmac_state sbm_state; /* current state */ 251 252 void __iomem *sbm_macenable; /* MAC Enable Register */ 253 void __iomem *sbm_maccfg; /* MAC Config Register */ 254 void __iomem *sbm_fifocfg; /* FIFO Config Register */ 255 void __iomem *sbm_framecfg; /* Frame Config Register */ 256 void __iomem *sbm_rxfilter; /* Receive Filter Register */ 257 void __iomem *sbm_isr; /* Interrupt Status Register */ 258 void __iomem *sbm_imr; /* Interrupt Mask Register */ 259 void __iomem *sbm_mdio; /* MDIO Register */ 260 261 enum sbmac_speed sbm_speed; /* current speed */ 262 enum sbmac_duplex sbm_duplex; /* current duplex */ 263 enum sbmac_fc sbm_fc; /* cur. flow control setting */ 264 int sbm_pause; /* current pause setting */ 265 int sbm_link; /* current link state */ 266 267 unsigned char sbm_hwaddr[ETH_ALEN]; 268 269 struct sbmacdma sbm_txdma; /* only channel 0 for now */ 270 struct sbmacdma sbm_rxdma; 271 int rx_hw_checksum; 272 int sbe_idx; 273}; 274 275 276/********************************************************************** 277 * Externs 278 ********************************************************************* */ 279 280/********************************************************************** 281 * Prototypes 282 ********************************************************************* */ 283 284static void sbdma_initctx(struct sbmacdma *d, struct sbmac_softc *s, int chan, 285 int txrx, int maxdescr); 286static void sbdma_channel_start(struct sbmacdma *d, int rxtx); 287static int sbdma_add_rcvbuffer(struct sbmac_softc *sc, struct sbmacdma *d, 288 struct sk_buff *m); 289static int sbdma_add_txbuffer(struct sbmacdma *d, struct sk_buff *m); 290static void sbdma_emptyring(struct sbmacdma *d); 291static void sbdma_fillring(struct sbmac_softc *sc, struct sbmacdma *d); 292static int sbdma_rx_process(struct sbmac_softc *sc, struct sbmacdma *d, 293 int work_to_do, int poll); 294static void sbdma_tx_process(struct sbmac_softc *sc, struct sbmacdma *d, 295 int poll); 296static int sbmac_initctx(struct sbmac_softc *s); 297static void sbmac_channel_start(struct sbmac_softc *s); 298static void sbmac_channel_stop(struct sbmac_softc *s); 299static enum sbmac_state sbmac_set_channel_state(struct sbmac_softc *, 300 enum sbmac_state); 301static void sbmac_promiscuous_mode(struct sbmac_softc *sc, int onoff); 302static uint64_t sbmac_addr2reg(unsigned char *ptr); 303static irqreturn_t sbmac_intr(int irq, void *dev_instance); 304static int sbmac_start_tx(struct sk_buff *skb, struct net_device *dev); 305static void sbmac_setmulti(struct sbmac_softc *sc); 306static int sbmac_init(struct platform_device *pldev, long long base); 307static int sbmac_set_speed(struct sbmac_softc *s, enum sbmac_speed speed); 308static int sbmac_set_duplex(struct sbmac_softc *s, enum sbmac_duplex duplex, 309 enum sbmac_fc fc); 310 311static int sbmac_open(struct net_device *dev); 312static void sbmac_tx_timeout (struct net_device *dev); 313static void sbmac_set_rx_mode(struct net_device *dev); 314static int sbmac_mii_ioctl(struct net_device *dev, struct ifreq *rq, int cmd); 315static int sbmac_close(struct net_device *dev); 316static int sbmac_poll(struct napi_struct *napi, int budget); 317 318static void sbmac_mii_poll(struct net_device *dev); 319static int sbmac_mii_probe(struct net_device *dev); 320 321static void sbmac_mii_sync(void __iomem *sbm_mdio); 322static void sbmac_mii_senddata(void __iomem *sbm_mdio, unsigned int data, 323 int bitcnt); 324static int sbmac_mii_read(struct mii_bus *bus, int phyaddr, int regidx); 325static int sbmac_mii_write(struct mii_bus *bus, int phyaddr, int regidx, 326 u16 val); 327 328 329/********************************************************************** 330 * Globals 331 ********************************************************************* */ 332 333static char sbmac_string[] = "sb1250-mac"; 334 335static char sbmac_mdio_string[] = "sb1250-mac-mdio"; 336 337 338/********************************************************************** 339 * MDIO constants 340 ********************************************************************* */ 341 342#define MII_COMMAND_START 0x01 343#define MII_COMMAND_READ 0x02 344#define MII_COMMAND_WRITE 0x01 345#define MII_COMMAND_ACK 0x02 346 347#define M_MAC_MDIO_DIR_OUTPUT 0 /* for clarity */ 348 349#define ENABLE 1 350#define DISABLE 0 351 352/********************************************************************** 353 * SBMAC_MII_SYNC(sbm_mdio) 354 * 355 * Synchronize with the MII - send a pattern of bits to the MII 356 * that will guarantee that it is ready to accept a command. 357 * 358 * Input parameters: 359 * sbm_mdio - address of the MAC's MDIO register 360 * 361 * Return value: 362 * nothing 363 ********************************************************************* */ 364 365static void sbmac_mii_sync(void __iomem *sbm_mdio) 366{ 367 int cnt; 368 uint64_t bits; 369 int mac_mdio_genc; 370 371 mac_mdio_genc = __raw_readq(sbm_mdio) & M_MAC_GENC; 372 373 bits = M_MAC_MDIO_DIR_OUTPUT | M_MAC_MDIO_OUT; 374 375 __raw_writeq(bits | mac_mdio_genc, sbm_mdio); 376 377 for (cnt = 0; cnt < 32; cnt++) { 378 __raw_writeq(bits | M_MAC_MDC | mac_mdio_genc, sbm_mdio); 379 __raw_writeq(bits | mac_mdio_genc, sbm_mdio); 380 } 381} 382 383/********************************************************************** 384 * SBMAC_MII_SENDDATA(sbm_mdio, data, bitcnt) 385 * 386 * Send some bits to the MII. The bits to be sent are right- 387 * justified in the 'data' parameter. 388 * 389 * Input parameters: 390 * sbm_mdio - address of the MAC's MDIO register 391 * data - data to send 392 * bitcnt - number of bits to send 393 ********************************************************************* */ 394 395static void sbmac_mii_senddata(void __iomem *sbm_mdio, unsigned int data, 396 int bitcnt) 397{ 398 int i; 399 uint64_t bits; 400 unsigned int curmask; 401 int mac_mdio_genc; 402 403 mac_mdio_genc = __raw_readq(sbm_mdio) & M_MAC_GENC; 404 405 bits = M_MAC_MDIO_DIR_OUTPUT; 406 __raw_writeq(bits | mac_mdio_genc, sbm_mdio); 407 408 curmask = 1 << (bitcnt - 1); 409 410 for (i = 0; i < bitcnt; i++) { 411 if (data & curmask) 412 bits |= M_MAC_MDIO_OUT; 413 else bits &= ~M_MAC_MDIO_OUT; 414 __raw_writeq(bits | mac_mdio_genc, sbm_mdio); 415 __raw_writeq(bits | M_MAC_MDC | mac_mdio_genc, sbm_mdio); 416 __raw_writeq(bits | mac_mdio_genc, sbm_mdio); 417 curmask >>= 1; 418 } 419} 420 421 422 423/********************************************************************** 424 * SBMAC_MII_READ(bus, phyaddr, regidx) 425 * Read a PHY register. 426 * 427 * Input parameters: 428 * bus - MDIO bus handle 429 * phyaddr - PHY's address 430 * regnum - index of register to read 431 * 432 * Return value: 433 * value read, or 0xffff if an error occurred. 434 ********************************************************************* */ 435 436static int sbmac_mii_read(struct mii_bus *bus, int phyaddr, int regidx) 437{ 438 struct sbmac_softc *sc = (struct sbmac_softc *)bus->priv; 439 void __iomem *sbm_mdio = sc->sbm_mdio; 440 int idx; 441 int error; 442 int regval; 443 int mac_mdio_genc; 444 445 /* 446 * Synchronize ourselves so that the PHY knows the next 447 * thing coming down is a command 448 */ 449 sbmac_mii_sync(sbm_mdio); 450 451 /* 452 * Send the data to the PHY. The sequence is 453 * a "start" command (2 bits) 454 * a "read" command (2 bits) 455 * the PHY addr (5 bits) 456 * the register index (5 bits) 457 */ 458 sbmac_mii_senddata(sbm_mdio, MII_COMMAND_START, 2); 459 sbmac_mii_senddata(sbm_mdio, MII_COMMAND_READ, 2); 460 sbmac_mii_senddata(sbm_mdio, phyaddr, 5); 461 sbmac_mii_senddata(sbm_mdio, regidx, 5); 462 463 mac_mdio_genc = __raw_readq(sbm_mdio) & M_MAC_GENC; 464 465 /* 466 * Switch the port around without a clock transition. 467 */ 468 __raw_writeq(M_MAC_MDIO_DIR_INPUT | mac_mdio_genc, sbm_mdio); 469 470 /* 471 * Send out a clock pulse to signal we want the status 472 */ 473 __raw_writeq(M_MAC_MDIO_DIR_INPUT | M_MAC_MDC | mac_mdio_genc, 474 sbm_mdio); 475 __raw_writeq(M_MAC_MDIO_DIR_INPUT | mac_mdio_genc, sbm_mdio); 476 477 /* 478 * If an error occurred, the PHY will signal '1' back 479 */ 480 error = __raw_readq(sbm_mdio) & M_MAC_MDIO_IN; 481 482 /* 483 * Issue an 'idle' clock pulse, but keep the direction 484 * the same. 485 */ 486 __raw_writeq(M_MAC_MDIO_DIR_INPUT | M_MAC_MDC | mac_mdio_genc, 487 sbm_mdio); 488 __raw_writeq(M_MAC_MDIO_DIR_INPUT | mac_mdio_genc, sbm_mdio); 489 490 regval = 0; 491 492 for (idx = 0; idx < 16; idx++) { 493 regval <<= 1; 494 495 if (error == 0) { 496 if (__raw_readq(sbm_mdio) & M_MAC_MDIO_IN) 497 regval |= 1; 498 } 499 500 __raw_writeq(M_MAC_MDIO_DIR_INPUT | M_MAC_MDC | mac_mdio_genc, 501 sbm_mdio); 502 __raw_writeq(M_MAC_MDIO_DIR_INPUT | mac_mdio_genc, sbm_mdio); 503 } 504 505 /* Switch back to output */ 506 __raw_writeq(M_MAC_MDIO_DIR_OUTPUT | mac_mdio_genc, sbm_mdio); 507 508 if (error == 0) 509 return regval; 510 return 0xffff; 511} 512 513 514/********************************************************************** 515 * SBMAC_MII_WRITE(bus, phyaddr, regidx, regval) 516 * 517 * Write a value to a PHY register. 518 * 519 * Input parameters: 520 * bus - MDIO bus handle 521 * phyaddr - PHY to use 522 * regidx - register within the PHY 523 * regval - data to write to register 524 * 525 * Return value: 526 * 0 for success 527 ********************************************************************* */ 528 529static int sbmac_mii_write(struct mii_bus *bus, int phyaddr, int regidx, 530 u16 regval) 531{ 532 struct sbmac_softc *sc = (struct sbmac_softc *)bus->priv; 533 void __iomem *sbm_mdio = sc->sbm_mdio; 534 int mac_mdio_genc; 535 536 sbmac_mii_sync(sbm_mdio); 537 538 sbmac_mii_senddata(sbm_mdio, MII_COMMAND_START, 2); 539 sbmac_mii_senddata(sbm_mdio, MII_COMMAND_WRITE, 2); 540 sbmac_mii_senddata(sbm_mdio, phyaddr, 5); 541 sbmac_mii_senddata(sbm_mdio, regidx, 5); 542 sbmac_mii_senddata(sbm_mdio, MII_COMMAND_ACK, 2); 543 sbmac_mii_senddata(sbm_mdio, regval, 16); 544 545 mac_mdio_genc = __raw_readq(sbm_mdio) & M_MAC_GENC; 546 547 __raw_writeq(M_MAC_MDIO_DIR_OUTPUT | mac_mdio_genc, sbm_mdio); 548 549 return 0; 550} 551 552 553 554/********************************************************************** 555 * SBDMA_INITCTX(d,s,chan,txrx,maxdescr) 556 * 557 * Initialize a DMA channel context. Since there are potentially 558 * eight DMA channels per MAC, it's nice to do this in a standard 559 * way. 560 * 561 * Input parameters: 562 * d - struct sbmacdma (DMA channel context) 563 * s - struct sbmac_softc (pointer to a MAC) 564 * chan - channel number (0..1 right now) 565 * txrx - Identifies DMA_TX or DMA_RX for channel direction 566 * maxdescr - number of descriptors 567 * 568 * Return value: 569 * nothing 570 ********************************************************************* */ 571 572static void sbdma_initctx(struct sbmacdma *d, struct sbmac_softc *s, int chan, 573 int txrx, int maxdescr) 574{ 575#ifdef CONFIG_SBMAC_COALESCE 576 int int_pktcnt, int_timeout; 577#endif 578 579 /* 580 * Save away interesting stuff in the structure 581 */ 582 583 d->sbdma_eth = s; 584 d->sbdma_channel = chan; 585 d->sbdma_txdir = txrx; 586 587#if 0 588 /* RMON clearing */ 589 s->sbe_idx =(s->sbm_base - A_MAC_BASE_0)/MAC_SPACING; 590#endif 591 592 __raw_writeq(0, s->sbm_base + R_MAC_RMON_TX_BYTES); 593 __raw_writeq(0, s->sbm_base + R_MAC_RMON_COLLISIONS); 594 __raw_writeq(0, s->sbm_base + R_MAC_RMON_LATE_COL); 595 __raw_writeq(0, s->sbm_base + R_MAC_RMON_EX_COL); 596 __raw_writeq(0, s->sbm_base + R_MAC_RMON_FCS_ERROR); 597 __raw_writeq(0, s->sbm_base + R_MAC_RMON_TX_ABORT); 598 __raw_writeq(0, s->sbm_base + R_MAC_RMON_TX_BAD); 599 __raw_writeq(0, s->sbm_base + R_MAC_RMON_TX_GOOD); 600 __raw_writeq(0, s->sbm_base + R_MAC_RMON_TX_RUNT); 601 __raw_writeq(0, s->sbm_base + R_MAC_RMON_TX_OVERSIZE); 602 __raw_writeq(0, s->sbm_base + R_MAC_RMON_RX_BYTES); 603 __raw_writeq(0, s->sbm_base + R_MAC_RMON_RX_MCAST); 604 __raw_writeq(0, s->sbm_base + R_MAC_RMON_RX_BCAST); 605 __raw_writeq(0, s->sbm_base + R_MAC_RMON_RX_BAD); 606 __raw_writeq(0, s->sbm_base + R_MAC_RMON_RX_GOOD); 607 __raw_writeq(0, s->sbm_base + R_MAC_RMON_RX_RUNT); 608 __raw_writeq(0, s->sbm_base + R_MAC_RMON_RX_OVERSIZE); 609 __raw_writeq(0, s->sbm_base + R_MAC_RMON_RX_FCS_ERROR); 610 __raw_writeq(0, s->sbm_base + R_MAC_RMON_RX_LENGTH_ERROR); 611 __raw_writeq(0, s->sbm_base + R_MAC_RMON_RX_CODE_ERROR); 612 __raw_writeq(0, s->sbm_base + R_MAC_RMON_RX_ALIGN_ERROR); 613 614 /* 615 * initialize register pointers 616 */ 617 618 d->sbdma_config0 = 619 s->sbm_base + R_MAC_DMA_REGISTER(txrx,chan,R_MAC_DMA_CONFIG0); 620 d->sbdma_config1 = 621 s->sbm_base + R_MAC_DMA_REGISTER(txrx,chan,R_MAC_DMA_CONFIG1); 622 d->sbdma_dscrbase = 623 s->sbm_base + R_MAC_DMA_REGISTER(txrx,chan,R_MAC_DMA_DSCR_BASE); 624 d->sbdma_dscrcnt = 625 s->sbm_base + R_MAC_DMA_REGISTER(txrx,chan,R_MAC_DMA_DSCR_CNT); 626 d->sbdma_curdscr = 627 s->sbm_base + R_MAC_DMA_REGISTER(txrx,chan,R_MAC_DMA_CUR_DSCRADDR); 628 if (d->sbdma_txdir) 629 d->sbdma_oodpktlost = NULL; 630 else 631 d->sbdma_oodpktlost = 632 s->sbm_base + R_MAC_DMA_REGISTER(txrx,chan,R_MAC_DMA_OODPKTLOST_RX); 633 634 /* 635 * Allocate memory for the ring 636 */ 637 638 d->sbdma_maxdescr = maxdescr; 639 640 d->sbdma_dscrtable_unaligned = kcalloc(d->sbdma_maxdescr + 1, 641 sizeof(*d->sbdma_dscrtable), 642 GFP_KERNEL); 643 644 /* 645 * The descriptor table must be aligned to at least 16 bytes or the 646 * MAC will corrupt it. 647 */ 648 d->sbdma_dscrtable = (struct sbdmadscr *) 649 ALIGN((unsigned long)d->sbdma_dscrtable_unaligned, 650 sizeof(*d->sbdma_dscrtable)); 651 652 d->sbdma_dscrtable_end = d->sbdma_dscrtable + d->sbdma_maxdescr; 653 654 d->sbdma_dscrtable_phys = virt_to_phys(d->sbdma_dscrtable); 655 656 /* 657 * And context table 658 */ 659 660 d->sbdma_ctxtable = kcalloc(d->sbdma_maxdescr, 661 sizeof(*d->sbdma_ctxtable), GFP_KERNEL); 662 663#ifdef CONFIG_SBMAC_COALESCE 664 /* 665 * Setup Rx/Tx DMA coalescing defaults 666 */ 667 668 int_pktcnt = (txrx == DMA_TX) ? int_pktcnt_tx : int_pktcnt_rx; 669 if ( int_pktcnt ) { 670 d->sbdma_int_pktcnt = int_pktcnt; 671 } else { 672 d->sbdma_int_pktcnt = 1; 673 } 674 675 int_timeout = (txrx == DMA_TX) ? int_timeout_tx : int_timeout_rx; 676 if ( int_timeout ) { 677 d->sbdma_int_timeout = int_timeout; 678 } else { 679 d->sbdma_int_timeout = 0; 680 } 681#endif 682 683} 684 685/********************************************************************** 686 * SBDMA_CHANNEL_START(d) 687 * 688 * Initialize the hardware registers for a DMA channel. 689 * 690 * Input parameters: 691 * d - DMA channel to init (context must be previously init'd 692 * rxtx - DMA_RX or DMA_TX depending on what type of channel 693 * 694 * Return value: 695 * nothing 696 ********************************************************************* */ 697 698static void sbdma_channel_start(struct sbmacdma *d, int rxtx) 699{ 700 /* 701 * Turn on the DMA channel 702 */ 703 704#ifdef CONFIG_SBMAC_COALESCE 705 __raw_writeq(V_DMA_INT_TIMEOUT(d->sbdma_int_timeout) | 706 0, d->sbdma_config1); 707 __raw_writeq(M_DMA_EOP_INT_EN | 708 V_DMA_RINGSZ(d->sbdma_maxdescr) | 709 V_DMA_INT_PKTCNT(d->sbdma_int_pktcnt) | 710 0, d->sbdma_config0); 711#else 712 __raw_writeq(0, d->sbdma_config1); 713 __raw_writeq(V_DMA_RINGSZ(d->sbdma_maxdescr) | 714 0, d->sbdma_config0); 715#endif 716 717 __raw_writeq(d->sbdma_dscrtable_phys, d->sbdma_dscrbase); 718 719 /* 720 * Initialize ring pointers 721 */ 722 723 d->sbdma_addptr = d->sbdma_dscrtable; 724 d->sbdma_remptr = d->sbdma_dscrtable; 725} 726 727/********************************************************************** 728 * SBDMA_CHANNEL_STOP(d) 729 * 730 * Initialize the hardware registers for a DMA channel. 731 * 732 * Input parameters: 733 * d - DMA channel to init (context must be previously init'd 734 * 735 * Return value: 736 * nothing 737 ********************************************************************* */ 738 739static void sbdma_channel_stop(struct sbmacdma *d) 740{ 741 /* 742 * Turn off the DMA channel 743 */ 744 745 __raw_writeq(0, d->sbdma_config1); 746 747 __raw_writeq(0, d->sbdma_dscrbase); 748 749 __raw_writeq(0, d->sbdma_config0); 750 751 /* 752 * Zero ring pointers 753 */ 754 755 d->sbdma_addptr = NULL; 756 d->sbdma_remptr = NULL; 757} 758 759static inline void sbdma_align_skb(struct sk_buff *skb, 760 unsigned int power2, unsigned int offset) 761{ 762 unsigned char *addr = skb->data; 763 unsigned char *newaddr = PTR_ALIGN(addr, power2); 764 765 skb_reserve(skb, newaddr - addr + offset); 766} 767 768 769/********************************************************************** 770 * SBDMA_ADD_RCVBUFFER(d,sb) 771 * 772 * Add a buffer to the specified DMA channel. For receive channels, 773 * this queues a buffer for inbound packets. 774 * 775 * Input parameters: 776 * sc - softc structure 777 * d - DMA channel descriptor 778 * sb - sk_buff to add, or NULL if we should allocate one 779 * 780 * Return value: 781 * 0 if buffer could not be added (ring is full) 782 * 1 if buffer added successfully 783 ********************************************************************* */ 784 785 786static int sbdma_add_rcvbuffer(struct sbmac_softc *sc, struct sbmacdma *d, 787 struct sk_buff *sb) 788{ 789 struct net_device *dev = sc->sbm_dev; 790 struct sbdmadscr *dsc; 791 struct sbdmadscr *nextdsc; 792 struct sk_buff *sb_new = NULL; 793 int pktsize = ENET_PACKET_SIZE; 794 795 /* get pointer to our current place in the ring */ 796 797 dsc = d->sbdma_addptr; 798 nextdsc = SBDMA_NEXTBUF(d,sbdma_addptr); 799 800 /* 801 * figure out if the ring is full - if the next descriptor 802 * is the same as the one that we're going to remove from 803 * the ring, the ring is full 804 */ 805 806 if (nextdsc == d->sbdma_remptr) { 807 return -ENOSPC; 808 } 809 810 /* 811 * Allocate a sk_buff if we don't already have one. 812 * If we do have an sk_buff, reset it so that it's empty. 813 * 814 * Note: sk_buffs don't seem to be guaranteed to have any sort 815 * of alignment when they are allocated. Therefore, allocate enough 816 * extra space to make sure that: 817 * 818 * 1. the data does not start in the middle of a cache line. 819 * 2. The data does not end in the middle of a cache line 820 * 3. The buffer can be aligned such that the IP addresses are 821 * naturally aligned. 822 * 823 * Remember, the SOCs MAC writes whole cache lines at a time, 824 * without reading the old contents first. So, if the sk_buff's 825 * data portion starts in the middle of a cache line, the SOC 826 * DMA will trash the beginning (and ending) portions. 827 */ 828 829 if (sb == NULL) { 830 sb_new = netdev_alloc_skb(dev, ENET_PACKET_SIZE + 831 SMP_CACHE_BYTES * 2 + 832 NET_IP_ALIGN); 833 if (sb_new == NULL) 834 return -ENOBUFS; 835 836 sbdma_align_skb(sb_new, SMP_CACHE_BYTES, NET_IP_ALIGN); 837 } 838 else { 839 sb_new = sb; 840 /* 841 * nothing special to reinit buffer, it's already aligned 842 * and sb->data already points to a good place. 843 */ 844 } 845 846 /* 847 * fill in the descriptor 848 */ 849 850#ifdef CONFIG_SBMAC_COALESCE 851 /* 852 * Do not interrupt per DMA transfer. 853 */ 854 dsc->dscr_a = virt_to_phys(sb_new->data) | 855 V_DMA_DSCRA_A_SIZE(NUMCACHEBLKS(pktsize + NET_IP_ALIGN)) | 0; 856#else 857 dsc->dscr_a = virt_to_phys(sb_new->data) | 858 V_DMA_DSCRA_A_SIZE(NUMCACHEBLKS(pktsize + NET_IP_ALIGN)) | 859 M_DMA_DSCRA_INTERRUPT; 860#endif 861 862 /* receiving: no options */ 863 dsc->dscr_b = 0; 864 865 /* 866 * fill in the context 867 */ 868 869 d->sbdma_ctxtable[dsc-d->sbdma_dscrtable] = sb_new; 870 871 /* 872 * point at next packet 873 */ 874 875 d->sbdma_addptr = nextdsc; 876 877 /* 878 * Give the buffer to the DMA engine. 879 */ 880 881 __raw_writeq(1, d->sbdma_dscrcnt); 882 883 return 0; /* we did it */ 884} 885 886/********************************************************************** 887 * SBDMA_ADD_TXBUFFER(d,sb) 888 * 889 * Add a transmit buffer to the specified DMA channel, causing a 890 * transmit to start. 891 * 892 * Input parameters: 893 * d - DMA channel descriptor 894 * sb - sk_buff to add 895 * 896 * Return value: 897 * 0 transmit queued successfully 898 * otherwise error code 899 ********************************************************************* */ 900 901 902static int sbdma_add_txbuffer(struct sbmacdma *d, struct sk_buff *sb) 903{ 904 struct sbdmadscr *dsc; 905 struct sbdmadscr *nextdsc; 906 uint64_t phys; 907 uint64_t ncb; 908 int length; 909 910 /* get pointer to our current place in the ring */ 911 912 dsc = d->sbdma_addptr; 913 nextdsc = SBDMA_NEXTBUF(d,sbdma_addptr); 914 915 /* 916 * figure out if the ring is full - if the next descriptor 917 * is the same as the one that we're going to remove from 918 * the ring, the ring is full 919 */ 920 921 if (nextdsc == d->sbdma_remptr) { 922 return -ENOSPC; 923 } 924 925 /* 926 * Under Linux, it's not necessary to copy/coalesce buffers 927 * like it is on NetBSD. We think they're all contiguous, 928 * but that may not be true for GBE. 929 */ 930 931 length = sb->len; 932 933 /* 934 * fill in the descriptor. Note that the number of cache 935 * blocks in the descriptor is the number of blocks 936 * *spanned*, so we need to add in the offset (if any) 937 * while doing the calculation. 938 */ 939 940 phys = virt_to_phys(sb->data); 941 ncb = NUMCACHEBLKS(length+(phys & (SMP_CACHE_BYTES - 1))); 942 943 dsc->dscr_a = phys | 944 V_DMA_DSCRA_A_SIZE(ncb) | 945#ifndef CONFIG_SBMAC_COALESCE 946 M_DMA_DSCRA_INTERRUPT | 947#endif 948 M_DMA_ETHTX_SOP; 949 950 /* transmitting: set outbound options and length */ 951 952 dsc->dscr_b = V_DMA_DSCRB_OPTIONS(K_DMA_ETHTX_APPENDCRC_APPENDPAD) | 953 V_DMA_DSCRB_PKT_SIZE(length); 954 955 /* 956 * fill in the context 957 */ 958 959 d->sbdma_ctxtable[dsc-d->sbdma_dscrtable] = sb; 960 961 /* 962 * point at next packet 963 */ 964 965 d->sbdma_addptr = nextdsc; 966 967 /* 968 * Give the buffer to the DMA engine. 969 */ 970 971 __raw_writeq(1, d->sbdma_dscrcnt); 972 973 return 0; /* we did it */ 974} 975 976 977 978 979/********************************************************************** 980 * SBDMA_EMPTYRING(d) 981 * 982 * Free all allocated sk_buffs on the specified DMA channel; 983 * 984 * Input parameters: 985 * d - DMA channel 986 * 987 * Return value: 988 * nothing 989 ********************************************************************* */ 990 991static void sbdma_emptyring(struct sbmacdma *d) 992{ 993 int idx; 994 struct sk_buff *sb; 995 996 for (idx = 0; idx < d->sbdma_maxdescr; idx++) { 997 sb = d->sbdma_ctxtable[idx]; 998 if (sb) { 999 dev_kfree_skb(sb); 1000 d->sbdma_ctxtable[idx] = NULL; 1001 } 1002 } 1003} 1004 1005 1006/********************************************************************** 1007 * SBDMA_FILLRING(d) 1008 * 1009 * Fill the specified DMA channel (must be receive channel) 1010 * with sk_buffs 1011 * 1012 * Input parameters: 1013 * sc - softc structure 1014 * d - DMA channel 1015 * 1016 * Return value: 1017 * nothing 1018 ********************************************************************* */ 1019 1020static void sbdma_fillring(struct sbmac_softc *sc, struct sbmacdma *d) 1021{ 1022 int idx; 1023 1024 for (idx = 0; idx < SBMAC_MAX_RXDESCR - 1; idx++) { 1025 if (sbdma_add_rcvbuffer(sc, d, NULL) != 0) 1026 break; 1027 } 1028} 1029 1030#ifdef CONFIG_NET_POLL_CONTROLLER 1031static void sbmac_netpoll(struct net_device *netdev) 1032{ 1033 struct sbmac_softc *sc = netdev_priv(netdev); 1034 int irq = sc->sbm_dev->irq; 1035 1036 __raw_writeq(0, sc->sbm_imr); 1037 1038 sbmac_intr(irq, netdev); 1039 1040#ifdef CONFIG_SBMAC_COALESCE 1041 __raw_writeq(((M_MAC_INT_EOP_COUNT | M_MAC_INT_EOP_TIMER) << S_MAC_TX_CH0) | 1042 ((M_MAC_INT_EOP_COUNT | M_MAC_INT_EOP_TIMER) << S_MAC_RX_CH0), 1043 sc->sbm_imr); 1044#else 1045 __raw_writeq((M_MAC_INT_CHANNEL << S_MAC_TX_CH0) | 1046 (M_MAC_INT_CHANNEL << S_MAC_RX_CH0), sc->sbm_imr); 1047#endif 1048} 1049#endif 1050 1051/********************************************************************** 1052 * SBDMA_RX_PROCESS(sc,d,work_to_do,poll) 1053 * 1054 * Process "completed" receive buffers on the specified DMA channel. 1055 * 1056 * Input parameters: 1057 * sc - softc structure 1058 * d - DMA channel context 1059 * work_to_do - no. of packets to process before enabling interrupt 1060 * again (for NAPI) 1061 * poll - 1: using polling (for NAPI) 1062 * 1063 * Return value: 1064 * nothing 1065 ********************************************************************* */ 1066 1067static int sbdma_rx_process(struct sbmac_softc *sc, struct sbmacdma *d, 1068 int work_to_do, int poll) 1069{ 1070 struct net_device *dev = sc->sbm_dev; 1071 int curidx; 1072 int hwidx; 1073 struct sbdmadscr *dsc; 1074 struct sk_buff *sb; 1075 int len; 1076 int work_done = 0; 1077 int dropped = 0; 1078 1079 prefetch(d); 1080 1081again: 1082 /* Check if the HW dropped any frames */ 1083 dev->stats.rx_fifo_errors 1084 += __raw_readq(sc->sbm_rxdma.sbdma_oodpktlost) & 0xffff; 1085 __raw_writeq(0, sc->sbm_rxdma.sbdma_oodpktlost); 1086 1087 while (work_to_do-- > 0) { 1088 /* 1089 * figure out where we are (as an index) and where 1090 * the hardware is (also as an index) 1091 * 1092 * This could be done faster if (for example) the 1093 * descriptor table was page-aligned and contiguous in 1094 * both virtual and physical memory -- you could then 1095 * just compare the low-order bits of the virtual address 1096 * (sbdma_remptr) and the physical address (sbdma_curdscr CSR) 1097 */ 1098 1099 dsc = d->sbdma_remptr; 1100 curidx = dsc - d->sbdma_dscrtable; 1101 1102 prefetch(dsc); 1103 prefetch(&d->sbdma_ctxtable[curidx]); 1104 1105 hwidx = ((__raw_readq(d->sbdma_curdscr) & M_DMA_CURDSCR_ADDR) - 1106 d->sbdma_dscrtable_phys) / 1107 sizeof(*d->sbdma_dscrtable); 1108 1109 /* 1110 * If they're the same, that means we've processed all 1111 * of the descriptors up to (but not including) the one that 1112 * the hardware is working on right now. 1113 */ 1114 1115 if (curidx == hwidx) 1116 goto done; 1117 1118 /* 1119 * Otherwise, get the packet's sk_buff ptr back 1120 */ 1121 1122 sb = d->sbdma_ctxtable[curidx]; 1123 d->sbdma_ctxtable[curidx] = NULL; 1124 1125 len = (int)G_DMA_DSCRB_PKT_SIZE(dsc->dscr_b) - 4; 1126 1127 /* 1128 * Check packet status. If good, process it. 1129 * If not, silently drop it and put it back on the 1130 * receive ring. 1131 */ 1132 1133 if (likely (!(dsc->dscr_a & M_DMA_ETHRX_BAD))) { 1134 1135 /* 1136 * Add a new buffer to replace the old one. If we fail 1137 * to allocate a buffer, we're going to drop this 1138 * packet and put it right back on the receive ring. 1139 */ 1140 1141 if (unlikely(sbdma_add_rcvbuffer(sc, d, NULL) == 1142 -ENOBUFS)) { 1143 dev->stats.rx_dropped++; 1144 /* Re-add old buffer */ 1145 sbdma_add_rcvbuffer(sc, d, sb); 1146 /* No point in continuing at the moment */ 1147 printk(KERN_ERR "dropped packet (1)\n"); 1148 d->sbdma_remptr = SBDMA_NEXTBUF(d,sbdma_remptr); 1149 goto done; 1150 } else { 1151 /* 1152 * Set length into the packet 1153 */ 1154 skb_put(sb,len); 1155 1156 /* 1157 * Buffer has been replaced on the 1158 * receive ring. Pass the buffer to 1159 * the kernel 1160 */ 1161 sb->protocol = eth_type_trans(sb,d->sbdma_eth->sbm_dev); 1162 /* Check hw IPv4/TCP checksum if supported */ 1163 if (sc->rx_hw_checksum == ENABLE) { 1164 if (!((dsc->dscr_a) & M_DMA_ETHRX_BADIP4CS) && 1165 !((dsc->dscr_a) & M_DMA_ETHRX_BADTCPCS)) { 1166 sb->ip_summed = CHECKSUM_UNNECESSARY; 1167 /* don't need to set sb->csum */ 1168 } else { 1169 skb_checksum_none_assert(sb); 1170 } 1171 } 1172 prefetch(sb->data); 1173 prefetch((const void *)(((char *)sb->data)+32)); 1174 if (poll) 1175 dropped = netif_receive_skb(sb); 1176 else 1177 dropped = netif_rx(sb); 1178 1179 if (dropped == NET_RX_DROP) { 1180 dev->stats.rx_dropped++; 1181 d->sbdma_remptr = SBDMA_NEXTBUF(d,sbdma_remptr); 1182 goto done; 1183 } 1184 else { 1185 dev->stats.rx_bytes += len; 1186 dev->stats.rx_packets++; 1187 } 1188 } 1189 } else { 1190 /* 1191 * Packet was mangled somehow. Just drop it and 1192 * put it back on the receive ring. 1193 */ 1194 dev->stats.rx_errors++; 1195 sbdma_add_rcvbuffer(sc, d, sb); 1196 } 1197 1198 1199 /* 1200 * .. and advance to the next buffer. 1201 */ 1202 1203 d->sbdma_remptr = SBDMA_NEXTBUF(d,sbdma_remptr); 1204 work_done++; 1205 } 1206 if (!poll) { 1207 work_to_do = 32; 1208 goto again; /* collect fifo drop statistics again */ 1209 } 1210done: 1211 return work_done; 1212} 1213 1214/********************************************************************** 1215 * SBDMA_TX_PROCESS(sc,d) 1216 * 1217 * Process "completed" transmit buffers on the specified DMA channel. 1218 * This is normally called within the interrupt service routine. 1219 * Note that this isn't really ideal for priority channels, since 1220 * it processes all of the packets on a given channel before 1221 * returning. 1222 * 1223 * Input parameters: 1224 * sc - softc structure 1225 * d - DMA channel context 1226 * poll - 1: using polling (for NAPI) 1227 * 1228 * Return value: 1229 * nothing 1230 ********************************************************************* */ 1231 1232static void sbdma_tx_process(struct sbmac_softc *sc, struct sbmacdma *d, 1233 int poll) 1234{ 1235 struct net_device *dev = sc->sbm_dev; 1236 int curidx; 1237 int hwidx; 1238 struct sbdmadscr *dsc; 1239 struct sk_buff *sb; 1240 unsigned long flags; 1241 int packets_handled = 0; 1242 1243 spin_lock_irqsave(&(sc->sbm_lock), flags); 1244 1245 if (d->sbdma_remptr == d->sbdma_addptr) 1246 goto end_unlock; 1247 1248 hwidx = ((__raw_readq(d->sbdma_curdscr) & M_DMA_CURDSCR_ADDR) - 1249 d->sbdma_dscrtable_phys) / sizeof(*d->sbdma_dscrtable); 1250 1251 for (;;) { 1252 /* 1253 * figure out where we are (as an index) and where 1254 * the hardware is (also as an index) 1255 * 1256 * This could be done faster if (for example) the 1257 * descriptor table was page-aligned and contiguous in 1258 * both virtual and physical memory -- you could then 1259 * just compare the low-order bits of the virtual address 1260 * (sbdma_remptr) and the physical address (sbdma_curdscr CSR) 1261 */ 1262 1263 curidx = d->sbdma_remptr - d->sbdma_dscrtable; 1264 1265 /* 1266 * If they're the same, that means we've processed all 1267 * of the descriptors up to (but not including) the one that 1268 * the hardware is working on right now. 1269 */ 1270 1271 if (curidx == hwidx) 1272 break; 1273 1274 /* 1275 * Otherwise, get the packet's sk_buff ptr back 1276 */ 1277 1278 dsc = &(d->sbdma_dscrtable[curidx]); 1279 sb = d->sbdma_ctxtable[curidx]; 1280 d->sbdma_ctxtable[curidx] = NULL; 1281 1282 /* 1283 * Stats 1284 */ 1285 1286 dev->stats.tx_bytes += sb->len; 1287 dev->stats.tx_packets++; 1288 1289 /* 1290 * for transmits, we just free buffers. 1291 */ 1292 1293 dev_kfree_skb_irq(sb); 1294 1295 /* 1296 * .. and advance to the next buffer. 1297 */ 1298 1299 d->sbdma_remptr = SBDMA_NEXTBUF(d,sbdma_remptr); 1300 1301 packets_handled++; 1302 1303 } 1304 1305 /* 1306 * Decide if we should wake up the protocol or not. 1307 * Other drivers seem to do this when we reach a low 1308 * watermark on the transmit queue. 1309 */ 1310 1311 if (packets_handled) 1312 netif_wake_queue(d->sbdma_eth->sbm_dev); 1313 1314end_unlock: 1315 spin_unlock_irqrestore(&(sc->sbm_lock), flags); 1316 1317} 1318 1319 1320 1321/********************************************************************** 1322 * SBMAC_INITCTX(s) 1323 * 1324 * Initialize an Ethernet context structure - this is called 1325 * once per MAC on the 1250. Memory is allocated here, so don't 1326 * call it again from inside the ioctl routines that bring the 1327 * interface up/down 1328 * 1329 * Input parameters: 1330 * s - sbmac context structure 1331 * 1332 * Return value: 1333 * 0 1334 ********************************************************************* */ 1335 1336static int sbmac_initctx(struct sbmac_softc *s) 1337{ 1338 1339 /* 1340 * figure out the addresses of some ports 1341 */ 1342 1343 s->sbm_macenable = s->sbm_base + R_MAC_ENABLE; 1344 s->sbm_maccfg = s->sbm_base + R_MAC_CFG; 1345 s->sbm_fifocfg = s->sbm_base + R_MAC_THRSH_CFG; 1346 s->sbm_framecfg = s->sbm_base + R_MAC_FRAMECFG; 1347 s->sbm_rxfilter = s->sbm_base + R_MAC_ADFILTER_CFG; 1348 s->sbm_isr = s->sbm_base + R_MAC_STATUS; 1349 s->sbm_imr = s->sbm_base + R_MAC_INT_MASK; 1350 s->sbm_mdio = s->sbm_base + R_MAC_MDIO; 1351 1352 /* 1353 * Initialize the DMA channels. Right now, only one per MAC is used 1354 * Note: Only do this _once_, as it allocates memory from the kernel! 1355 */ 1356 1357 sbdma_initctx(&(s->sbm_txdma),s,0,DMA_TX,SBMAC_MAX_TXDESCR); 1358 sbdma_initctx(&(s->sbm_rxdma),s,0,DMA_RX,SBMAC_MAX_RXDESCR); 1359 1360 /* 1361 * initial state is OFF 1362 */ 1363 1364 s->sbm_state = sbmac_state_off; 1365 1366 return 0; 1367} 1368 1369 1370static void sbdma_uninitctx(struct sbmacdma *d) 1371{ 1372 if (d->sbdma_dscrtable_unaligned) { 1373 kfree(d->sbdma_dscrtable_unaligned); 1374 d->sbdma_dscrtable_unaligned = d->sbdma_dscrtable = NULL; 1375 } 1376 1377 if (d->sbdma_ctxtable) { 1378 kfree(d->sbdma_ctxtable); 1379 d->sbdma_ctxtable = NULL; 1380 } 1381} 1382 1383 1384static void sbmac_uninitctx(struct sbmac_softc *sc) 1385{ 1386 sbdma_uninitctx(&(sc->sbm_txdma)); 1387 sbdma_uninitctx(&(sc->sbm_rxdma)); 1388} 1389 1390 1391/********************************************************************** 1392 * SBMAC_CHANNEL_START(s) 1393 * 1394 * Start packet processing on this MAC. 1395 * 1396 * Input parameters: 1397 * s - sbmac structure 1398 * 1399 * Return value: 1400 * nothing 1401 ********************************************************************* */ 1402 1403static void sbmac_channel_start(struct sbmac_softc *s) 1404{ 1405 uint64_t reg; 1406 void __iomem *port; 1407 uint64_t cfg,fifo,framecfg; 1408 int idx, th_value; 1409 1410 /* 1411 * Don't do this if running 1412 */ 1413 1414 if (s->sbm_state == sbmac_state_on) 1415 return; 1416 1417 /* 1418 * Bring the controller out of reset, but leave it off. 1419 */ 1420 1421 __raw_writeq(0, s->sbm_macenable); 1422 1423 /* 1424 * Ignore all received packets 1425 */ 1426 1427 __raw_writeq(0, s->sbm_rxfilter); 1428 1429 /* 1430 * Calculate values for various control registers. 1431 */ 1432 1433 cfg = M_MAC_RETRY_EN | 1434 M_MAC_TX_HOLD_SOP_EN | 1435 V_MAC_TX_PAUSE_CNT_16K | 1436 M_MAC_AP_STAT_EN | 1437 M_MAC_FAST_SYNC | 1438 M_MAC_SS_EN | 1439 0; 1440 1441 /* 1442 * Be sure that RD_THRSH+WR_THRSH <= 32 for pass1 pars 1443 * and make sure that RD_THRSH + WR_THRSH <=128 for pass2 and above 1444 * Use a larger RD_THRSH for gigabit 1445 */ 1446 if (soc_type == K_SYS_SOC_TYPE_BCM1250 && periph_rev < 2) 1447 th_value = 28; 1448 else 1449 th_value = 64; 1450 1451 fifo = V_MAC_TX_WR_THRSH(4) | /* Must be '4' or '8' */ 1452 ((s->sbm_speed == sbmac_speed_1000) 1453 ? V_MAC_TX_RD_THRSH(th_value) : V_MAC_TX_RD_THRSH(4)) | 1454 V_MAC_TX_RL_THRSH(4) | 1455 V_MAC_RX_PL_THRSH(4) | 1456 V_MAC_RX_RD_THRSH(4) | /* Must be '4' */ 1457 V_MAC_RX_RL_THRSH(8) | 1458 0; 1459 1460 framecfg = V_MAC_MIN_FRAMESZ_DEFAULT | 1461 V_MAC_MAX_FRAMESZ_DEFAULT | 1462 V_MAC_BACKOFF_SEL(1); 1463 1464 /* 1465 * Clear out the hash address map 1466 */ 1467 1468 port = s->sbm_base + R_MAC_HASH_BASE; 1469 for (idx = 0; idx < MAC_HASH_COUNT; idx++) { 1470 __raw_writeq(0, port); 1471 port += sizeof(uint64_t); 1472 } 1473 1474 /* 1475 * Clear out the exact-match table 1476 */ 1477 1478 port = s->sbm_base + R_MAC_ADDR_BASE; 1479 for (idx = 0; idx < MAC_ADDR_COUNT; idx++) { 1480 __raw_writeq(0, port); 1481 port += sizeof(uint64_t); 1482 } 1483 1484 /* 1485 * Clear out the DMA Channel mapping table registers 1486 */ 1487 1488 port = s->sbm_base + R_MAC_CHUP0_BASE; 1489 for (idx = 0; idx < MAC_CHMAP_COUNT; idx++) { 1490 __raw_writeq(0, port); 1491 port += sizeof(uint64_t); 1492 } 1493 1494 1495 port = s->sbm_base + R_MAC_CHLO0_BASE; 1496 for (idx = 0; idx < MAC_CHMAP_COUNT; idx++) { 1497 __raw_writeq(0, port); 1498 port += sizeof(uint64_t); 1499 } 1500 1501 /* 1502 * Program the hardware address. It goes into the hardware-address 1503 * register as well as the first filter register. 1504 */ 1505 1506 reg = sbmac_addr2reg(s->sbm_hwaddr); 1507 1508 port = s->sbm_base + R_MAC_ADDR_BASE; 1509 __raw_writeq(reg, port); 1510 port = s->sbm_base + R_MAC_ETHERNET_ADDR; 1511 1512#ifdef CONFIG_SB1_PASS_1_WORKAROUNDS 1513 /* 1514 * Pass1 SOCs do not receive packets addressed to the 1515 * destination address in the R_MAC_ETHERNET_ADDR register. 1516 * Set the value to zero. 1517 */ 1518 __raw_writeq(0, port); 1519#else 1520 __raw_writeq(reg, port); 1521#endif 1522 1523 /* 1524 * Set the receive filter for no packets, and write values 1525 * to the various config registers 1526 */ 1527 1528 __raw_writeq(0, s->sbm_rxfilter); 1529 __raw_writeq(0, s->sbm_imr); 1530 __raw_writeq(framecfg, s->sbm_framecfg); 1531 __raw_writeq(fifo, s->sbm_fifocfg); 1532 __raw_writeq(cfg, s->sbm_maccfg); 1533 1534 /* 1535 * Initialize DMA channels (rings should be ok now) 1536 */ 1537 1538 sbdma_channel_start(&(s->sbm_rxdma), DMA_RX); 1539 sbdma_channel_start(&(s->sbm_txdma), DMA_TX); 1540 1541 /* 1542 * Configure the speed, duplex, and flow control 1543 */ 1544 1545 sbmac_set_speed(s,s->sbm_speed); 1546 sbmac_set_duplex(s,s->sbm_duplex,s->sbm_fc); 1547 1548 /* 1549 * Fill the receive ring 1550 */ 1551 1552 sbdma_fillring(s, &(s->sbm_rxdma)); 1553 1554 /* 1555 * Turn on the rest of the bits in the enable register 1556 */ 1557 1558#if defined(CONFIG_SIBYTE_BCM1x55) || defined(CONFIG_SIBYTE_BCM1x80) 1559 __raw_writeq(M_MAC_RXDMA_EN0 | 1560 M_MAC_TXDMA_EN0, s->sbm_macenable); 1561#elif defined(CONFIG_SIBYTE_SB1250) || defined(CONFIG_SIBYTE_BCM112X) 1562 __raw_writeq(M_MAC_RXDMA_EN0 | 1563 M_MAC_TXDMA_EN0 | 1564 M_MAC_RX_ENABLE | 1565 M_MAC_TX_ENABLE, s->sbm_macenable); 1566#else 1567#error invalid SiByte MAC configuration 1568#endif 1569 1570#ifdef CONFIG_SBMAC_COALESCE 1571 __raw_writeq(((M_MAC_INT_EOP_COUNT | M_MAC_INT_EOP_TIMER) << S_MAC_TX_CH0) | 1572 ((M_MAC_INT_EOP_COUNT | M_MAC_INT_EOP_TIMER) << S_MAC_RX_CH0), s->sbm_imr); 1573#else 1574 __raw_writeq((M_MAC_INT_CHANNEL << S_MAC_TX_CH0) | 1575 (M_MAC_INT_CHANNEL << S_MAC_RX_CH0), s->sbm_imr); 1576#endif 1577 1578 /* 1579 * Enable receiving unicasts and broadcasts 1580 */ 1581 1582 __raw_writeq(M_MAC_UCAST_EN | M_MAC_BCAST_EN, s->sbm_rxfilter); 1583 1584 /* 1585 * we're running now. 1586 */ 1587 1588 s->sbm_state = sbmac_state_on; 1589 1590 /* 1591 * Program multicast addresses 1592 */ 1593 1594 sbmac_setmulti(s); 1595 1596 /* 1597 * If channel was in promiscuous mode before, turn that on 1598 */ 1599 1600 if (s->sbm_devflags & IFF_PROMISC) { 1601 sbmac_promiscuous_mode(s,1); 1602 } 1603 1604} 1605 1606 1607/********************************************************************** 1608 * SBMAC_CHANNEL_STOP(s) 1609 * 1610 * Stop packet processing on this MAC. 1611 * 1612 * Input parameters: 1613 * s - sbmac structure 1614 * 1615 * Return value: 1616 * nothing 1617 ********************************************************************* */ 1618 1619static void sbmac_channel_stop(struct sbmac_softc *s) 1620{ 1621 /* don't do this if already stopped */ 1622 1623 if (s->sbm_state == sbmac_state_off) 1624 return; 1625 1626 /* don't accept any packets, disable all interrupts */ 1627 1628 __raw_writeq(0, s->sbm_rxfilter); 1629 __raw_writeq(0, s->sbm_imr); 1630 1631 /* Turn off ticker */ 1632 1633 /* XXX */ 1634 1635 /* turn off receiver and transmitter */ 1636 1637 __raw_writeq(0, s->sbm_macenable); 1638 1639 /* We're stopped now. */ 1640 1641 s->sbm_state = sbmac_state_off; 1642 1643 /* 1644 * Stop DMA channels (rings should be ok now) 1645 */ 1646 1647 sbdma_channel_stop(&(s->sbm_rxdma)); 1648 sbdma_channel_stop(&(s->sbm_txdma)); 1649 1650 /* Empty the receive and transmit rings */ 1651 1652 sbdma_emptyring(&(s->sbm_rxdma)); 1653 sbdma_emptyring(&(s->sbm_txdma)); 1654 1655} 1656 1657/********************************************************************** 1658 * SBMAC_SET_CHANNEL_STATE(state) 1659 * 1660 * Set the channel's state ON or OFF 1661 * 1662 * Input parameters: 1663 * state - new state 1664 * 1665 * Return value: 1666 * old state 1667 ********************************************************************* */ 1668static enum sbmac_state sbmac_set_channel_state(struct sbmac_softc *sc, 1669 enum sbmac_state state) 1670{ 1671 enum sbmac_state oldstate = sc->sbm_state; 1672 1673 /* 1674 * If same as previous state, return 1675 */ 1676 1677 if (state == oldstate) { 1678 return oldstate; 1679 } 1680 1681 /* 1682 * If new state is ON, turn channel on 1683 */ 1684 1685 if (state == sbmac_state_on) { 1686 sbmac_channel_start(sc); 1687 } 1688 else { 1689 sbmac_channel_stop(sc); 1690 } 1691 1692 /* 1693 * Return previous state 1694 */ 1695 1696 return oldstate; 1697} 1698 1699 1700/********************************************************************** 1701 * SBMAC_PROMISCUOUS_MODE(sc,onoff) 1702 * 1703 * Turn on or off promiscuous mode 1704 * 1705 * Input parameters: 1706 * sc - softc 1707 * onoff - 1 to turn on, 0 to turn off 1708 * 1709 * Return value: 1710 * nothing 1711 ********************************************************************* */ 1712 1713static void sbmac_promiscuous_mode(struct sbmac_softc *sc,int onoff) 1714{ 1715 uint64_t reg; 1716 1717 if (sc->sbm_state != sbmac_state_on) 1718 return; 1719 1720 if (onoff) { 1721 reg = __raw_readq(sc->sbm_rxfilter); 1722 reg |= M_MAC_ALLPKT_EN; 1723 __raw_writeq(reg, sc->sbm_rxfilter); 1724 } 1725 else { 1726 reg = __raw_readq(sc->sbm_rxfilter); 1727 reg &= ~M_MAC_ALLPKT_EN; 1728 __raw_writeq(reg, sc->sbm_rxfilter); 1729 } 1730} 1731 1732/********************************************************************** 1733 * SBMAC_SETIPHDR_OFFSET(sc,onoff) 1734 * 1735 * Set the iphdr offset as 15 assuming ethernet encapsulation 1736 * 1737 * Input parameters: 1738 * sc - softc 1739 * 1740 * Return value: 1741 * nothing 1742 ********************************************************************* */ 1743 1744static void sbmac_set_iphdr_offset(struct sbmac_softc *sc) 1745{ 1746 uint64_t reg; 1747 1748 /* Hard code the off set to 15 for now */ 1749 reg = __raw_readq(sc->sbm_rxfilter); 1750 reg &= ~M_MAC_IPHDR_OFFSET | V_MAC_IPHDR_OFFSET(15); 1751 __raw_writeq(reg, sc->sbm_rxfilter); 1752 1753 /* BCM1250 pass1 didn't have hardware checksum. Everything 1754 later does. */ 1755 if (soc_type == K_SYS_SOC_TYPE_BCM1250 && periph_rev < 2) { 1756 sc->rx_hw_checksum = DISABLE; 1757 } else { 1758 sc->rx_hw_checksum = ENABLE; 1759 } 1760} 1761 1762 1763/********************************************************************** 1764 * SBMAC_ADDR2REG(ptr) 1765 * 1766 * Convert six bytes into the 64-bit register value that 1767 * we typically write into the SBMAC's address/mcast registers 1768 * 1769 * Input parameters: 1770 * ptr - pointer to 6 bytes 1771 * 1772 * Return value: 1773 * register value 1774 ********************************************************************* */ 1775 1776static uint64_t sbmac_addr2reg(unsigned char *ptr) 1777{ 1778 uint64_t reg = 0; 1779 1780 ptr += 6; 1781 1782 reg |= (uint64_t) *(--ptr); 1783 reg <<= 8; 1784 reg |= (uint64_t) *(--ptr); 1785 reg <<= 8; 1786 reg |= (uint64_t) *(--ptr); 1787 reg <<= 8; 1788 reg |= (uint64_t) *(--ptr); 1789 reg <<= 8; 1790 reg |= (uint64_t) *(--ptr); 1791 reg <<= 8; 1792 reg |= (uint64_t) *(--ptr); 1793 1794 return reg; 1795} 1796 1797 1798/********************************************************************** 1799 * SBMAC_SET_SPEED(s,speed) 1800 * 1801 * Configure LAN speed for the specified MAC. 1802 * Warning: must be called when MAC is off! 1803 * 1804 * Input parameters: 1805 * s - sbmac structure 1806 * speed - speed to set MAC to (see enum sbmac_speed) 1807 * 1808 * Return value: 1809 * 1 if successful 1810 * 0 indicates invalid parameters 1811 ********************************************************************* */ 1812 1813static int sbmac_set_speed(struct sbmac_softc *s, enum sbmac_speed speed) 1814{ 1815 uint64_t cfg; 1816 uint64_t framecfg; 1817 1818 /* 1819 * Save new current values 1820 */ 1821 1822 s->sbm_speed = speed; 1823 1824 if (s->sbm_state == sbmac_state_on) 1825 return 0; /* save for next restart */ 1826 1827 /* 1828 * Read current register values 1829 */ 1830 1831 cfg = __raw_readq(s->sbm_maccfg); 1832 framecfg = __raw_readq(s->sbm_framecfg); 1833 1834 /* 1835 * Mask out the stuff we want to change 1836 */ 1837 1838 cfg &= ~(M_MAC_BURST_EN | M_MAC_SPEED_SEL); 1839 framecfg &= ~(M_MAC_IFG_RX | M_MAC_IFG_TX | M_MAC_IFG_THRSH | 1840 M_MAC_SLOT_SIZE); 1841 1842 /* 1843 * Now add in the new bits 1844 */ 1845 1846 switch (speed) { 1847 case sbmac_speed_10: 1848 framecfg |= V_MAC_IFG_RX_10 | 1849 V_MAC_IFG_TX_10 | 1850 K_MAC_IFG_THRSH_10 | 1851 V_MAC_SLOT_SIZE_10; 1852 cfg |= V_MAC_SPEED_SEL_10MBPS; 1853 break; 1854 1855 case sbmac_speed_100: 1856 framecfg |= V_MAC_IFG_RX_100 | 1857 V_MAC_IFG_TX_100 | 1858 V_MAC_IFG_THRSH_100 | 1859 V_MAC_SLOT_SIZE_100; 1860 cfg |= V_MAC_SPEED_SEL_100MBPS ; 1861 break; 1862 1863 case sbmac_speed_1000: 1864 framecfg |= V_MAC_IFG_RX_1000 | 1865 V_MAC_IFG_TX_1000 | 1866 V_MAC_IFG_THRSH_1000 | 1867 V_MAC_SLOT_SIZE_1000; 1868 cfg |= V_MAC_SPEED_SEL_1000MBPS | M_MAC_BURST_EN; 1869 break; 1870 1871 default: 1872 return 0; 1873 } 1874 1875 /* 1876 * Send the bits back to the hardware 1877 */ 1878 1879 __raw_writeq(framecfg, s->sbm_framecfg); 1880 __raw_writeq(cfg, s->sbm_maccfg); 1881 1882 return 1; 1883} 1884 1885/********************************************************************** 1886 * SBMAC_SET_DUPLEX(s,duplex,fc) 1887 * 1888 * Set Ethernet duplex and flow control options for this MAC 1889 * Warning: must be called when MAC is off! 1890 * 1891 * Input parameters: 1892 * s - sbmac structure 1893 * duplex - duplex setting (see enum sbmac_duplex) 1894 * fc - flow control setting (see enum sbmac_fc) 1895 * 1896 * Return value: 1897 * 1 if ok 1898 * 0 if an invalid parameter combination was specified 1899 ********************************************************************* */ 1900 1901static int sbmac_set_duplex(struct sbmac_softc *s, enum sbmac_duplex duplex, 1902 enum sbmac_fc fc) 1903{ 1904 uint64_t cfg; 1905 1906 /* 1907 * Save new current values 1908 */ 1909 1910 s->sbm_duplex = duplex; 1911 s->sbm_fc = fc; 1912 1913 if (s->sbm_state == sbmac_state_on) 1914 return 0; /* save for next restart */ 1915 1916 /* 1917 * Read current register values 1918 */ 1919 1920 cfg = __raw_readq(s->sbm_maccfg); 1921 1922 /* 1923 * Mask off the stuff we're about to change 1924 */ 1925 1926 cfg &= ~(M_MAC_FC_SEL | M_MAC_FC_CMD | M_MAC_HDX_EN); 1927 1928 1929 switch (duplex) { 1930 case sbmac_duplex_half: 1931 switch (fc) { 1932 case sbmac_fc_disabled: 1933 cfg |= M_MAC_HDX_EN | V_MAC_FC_CMD_DISABLED; 1934 break; 1935 1936 case sbmac_fc_collision: 1937 cfg |= M_MAC_HDX_EN | V_MAC_FC_CMD_ENABLED; 1938 break; 1939 1940 case sbmac_fc_carrier: 1941 cfg |= M_MAC_HDX_EN | V_MAC_FC_CMD_ENAB_FALSECARR; 1942 break; 1943 1944 case sbmac_fc_frame: /* not valid in half duplex */ 1945 default: /* invalid selection */ 1946 return 0; 1947 } 1948 break; 1949 1950 case sbmac_duplex_full: 1951 switch (fc) { 1952 case sbmac_fc_disabled: 1953 cfg |= V_MAC_FC_CMD_DISABLED; 1954 break; 1955 1956 case sbmac_fc_frame: 1957 cfg |= V_MAC_FC_CMD_ENABLED; 1958 break; 1959 1960 case sbmac_fc_collision: /* not valid in full duplex */ 1961 case sbmac_fc_carrier: /* not valid in full duplex */ 1962 default: 1963 return 0; 1964 } 1965 break; 1966 default: 1967 return 0; 1968 } 1969 1970 /* 1971 * Send the bits back to the hardware 1972 */ 1973 1974 __raw_writeq(cfg, s->sbm_maccfg); 1975 1976 return 1; 1977} 1978 1979 1980 1981 1982/********************************************************************** 1983 * SBMAC_INTR() 1984 * 1985 * Interrupt handler for MAC interrupts 1986 * 1987 * Input parameters: 1988 * MAC structure 1989 * 1990 * Return value: 1991 * nothing 1992 ********************************************************************* */ 1993static irqreturn_t sbmac_intr(int irq,void *dev_instance) 1994{ 1995 struct net_device *dev = (struct net_device *) dev_instance; 1996 struct sbmac_softc *sc = netdev_priv(dev); 1997 uint64_t isr; 1998 int handled = 0; 1999 2000 /* 2001 * Read the ISR (this clears the bits in the real 2002 * register, except for counter addr) 2003 */ 2004 2005 isr = __raw_readq(sc->sbm_isr) & ~M_MAC_COUNTER_ADDR; 2006 2007 if (isr == 0) 2008 return IRQ_RETVAL(0); 2009 handled = 1; 2010 2011 /* 2012 * Transmits on channel 0 2013 */ 2014 2015 if (isr & (M_MAC_INT_CHANNEL << S_MAC_TX_CH0)) 2016 sbdma_tx_process(sc,&(sc->sbm_txdma), 0); 2017 2018 if (isr & (M_MAC_INT_CHANNEL << S_MAC_RX_CH0)) { 2019 if (napi_schedule_prep(&sc->napi)) { 2020 __raw_writeq(0, sc->sbm_imr); 2021 __napi_schedule(&sc->napi); 2022 /* Depend on the exit from poll to reenable intr */ 2023 } 2024 else { 2025 /* may leave some packets behind */ 2026 sbdma_rx_process(sc,&(sc->sbm_rxdma), 2027 SBMAC_MAX_RXDESCR * 2, 0); 2028 } 2029 } 2030 return IRQ_RETVAL(handled); 2031} 2032 2033/********************************************************************** 2034 * SBMAC_START_TX(skb,dev) 2035 * 2036 * Start output on the specified interface. Basically, we 2037 * queue as many buffers as we can until the ring fills up, or 2038 * we run off the end of the queue, whichever comes first. 2039 * 2040 * Input parameters: 2041 * 2042 * 2043 * Return value: 2044 * nothing 2045 ********************************************************************* */ 2046static int sbmac_start_tx(struct sk_buff *skb, struct net_device *dev) 2047{ 2048 struct sbmac_softc *sc = netdev_priv(dev); 2049 unsigned long flags; 2050 2051 /* lock eth irq */ 2052 spin_lock_irqsave(&sc->sbm_lock, flags); 2053 2054 /* 2055 * Put the buffer on the transmit ring. If we 2056 * don't have room, stop the queue. 2057 */ 2058 2059 if (sbdma_add_txbuffer(&(sc->sbm_txdma),skb)) { 2060 /* XXX save skb that we could not send */ 2061 netif_stop_queue(dev); 2062 spin_unlock_irqrestore(&sc->sbm_lock, flags); 2063 2064 return NETDEV_TX_BUSY; 2065 } 2066 2067 spin_unlock_irqrestore(&sc->sbm_lock, flags); 2068 2069 return NETDEV_TX_OK; 2070} 2071 2072/********************************************************************** 2073 * SBMAC_SETMULTI(sc) 2074 * 2075 * Reprogram the multicast table into the hardware, given 2076 * the list of multicasts associated with the interface 2077 * structure. 2078 * 2079 * Input parameters: 2080 * sc - softc 2081 * 2082 * Return value: 2083 * nothing 2084 ********************************************************************* */ 2085 2086static void sbmac_setmulti(struct sbmac_softc *sc) 2087{ 2088 uint64_t reg; 2089 void __iomem *port; 2090 int idx; 2091 struct netdev_hw_addr *ha; 2092 struct net_device *dev = sc->sbm_dev; 2093 2094 /* 2095 * Clear out entire multicast table. We do this by nuking 2096 * the entire hash table and all the direct matches except 2097 * the first one, which is used for our station address 2098 */ 2099 2100 for (idx = 1; idx < MAC_ADDR_COUNT; idx++) { 2101 port = sc->sbm_base + R_MAC_ADDR_BASE+(idx*sizeof(uint64_t)); 2102 __raw_writeq(0, port); 2103 } 2104 2105 for (idx = 0; idx < MAC_HASH_COUNT; idx++) { 2106 port = sc->sbm_base + R_MAC_HASH_BASE+(idx*sizeof(uint64_t)); 2107 __raw_writeq(0, port); 2108 } 2109 2110 /* 2111 * Clear the filter to say we don't want any multicasts. 2112 */ 2113 2114 reg = __raw_readq(sc->sbm_rxfilter); 2115 reg &= ~(M_MAC_MCAST_INV | M_MAC_MCAST_EN); 2116 __raw_writeq(reg, sc->sbm_rxfilter); 2117 2118 if (dev->flags & IFF_ALLMULTI) { 2119 /* 2120 * Enable ALL multicasts. Do this by inverting the 2121 * multicast enable bit. 2122 */ 2123 reg = __raw_readq(sc->sbm_rxfilter); 2124 reg |= (M_MAC_MCAST_INV | M_MAC_MCAST_EN); 2125 __raw_writeq(reg, sc->sbm_rxfilter); 2126 return; 2127 } 2128 2129 2130 /* 2131 * Progam new multicast entries. For now, only use the 2132 * perfect filter. In the future we'll need to use the 2133 * hash filter if the perfect filter overflows 2134 */ 2135 2136 /* XXX only using perfect filter for now, need to use hash 2137 * XXX if the table overflows */ 2138 2139 idx = 1; /* skip station address */ 2140 netdev_for_each_mc_addr(ha, dev) { 2141 if (idx == MAC_ADDR_COUNT) 2142 break; 2143 reg = sbmac_addr2reg(ha->addr); 2144 port = sc->sbm_base + R_MAC_ADDR_BASE+(idx * sizeof(uint64_t)); 2145 __raw_writeq(reg, port); 2146 idx++; 2147 } 2148 2149 /* 2150 * Enable the "accept multicast bits" if we programmed at least one 2151 * multicast. 2152 */ 2153 2154 if (idx > 1) { 2155 reg = __raw_readq(sc->sbm_rxfilter); 2156 reg |= M_MAC_MCAST_EN; 2157 __raw_writeq(reg, sc->sbm_rxfilter); 2158 } 2159} 2160 2161static int sb1250_change_mtu(struct net_device *_dev, int new_mtu) 2162{ 2163 if (new_mtu > ENET_PACKET_SIZE) 2164 return -EINVAL; 2165 _dev->mtu = new_mtu; 2166 pr_info("changing the mtu to %d\n", new_mtu); 2167 return 0; 2168} 2169 2170static const struct net_device_ops sbmac_netdev_ops = { 2171 .ndo_open = sbmac_open, 2172 .ndo_stop = sbmac_close, 2173 .ndo_start_xmit = sbmac_start_tx, 2174 .ndo_set_rx_mode = sbmac_set_rx_mode, 2175 .ndo_tx_timeout = sbmac_tx_timeout, 2176 .ndo_do_ioctl = sbmac_mii_ioctl, 2177 .ndo_change_mtu = sb1250_change_mtu, 2178 .ndo_validate_addr = eth_validate_addr, 2179 .ndo_set_mac_address = eth_mac_addr, 2180#ifdef CONFIG_NET_POLL_CONTROLLER 2181 .ndo_poll_controller = sbmac_netpoll, 2182#endif 2183}; 2184 2185/********************************************************************** 2186 * SBMAC_INIT(dev) 2187 * 2188 * Attach routine - init hardware and hook ourselves into linux 2189 * 2190 * Input parameters: 2191 * dev - net_device structure 2192 * 2193 * Return value: 2194 * status 2195 ********************************************************************* */ 2196 2197static int sbmac_init(struct platform_device *pldev, long long base) 2198{ 2199 struct net_device *dev = platform_get_drvdata(pldev); 2200 int idx = pldev->id; 2201 struct sbmac_softc *sc = netdev_priv(dev); 2202 unsigned char *eaddr; 2203 uint64_t ea_reg; 2204 int i; 2205 int err; 2206 2207 sc->sbm_dev = dev; 2208 sc->sbe_idx = idx; 2209 2210 eaddr = sc->sbm_hwaddr; 2211 2212 /* 2213 * Read the ethernet address. The firmware left this programmed 2214 * for us in the ethernet address register for each mac. 2215 */ 2216 2217 ea_reg = __raw_readq(sc->sbm_base + R_MAC_ETHERNET_ADDR); 2218 __raw_writeq(0, sc->sbm_base + R_MAC_ETHERNET_ADDR); 2219 for (i = 0; i < 6; i++) { 2220 eaddr[i] = (uint8_t) (ea_reg & 0xFF); 2221 ea_reg >>= 8; 2222 } 2223 2224 for (i = 0; i < 6; i++) { 2225 dev->dev_addr[i] = eaddr[i]; 2226 } 2227 2228 /* 2229 * Initialize context (get pointers to registers and stuff), then 2230 * allocate the memory for the descriptor tables. 2231 */ 2232 2233 sbmac_initctx(sc); 2234 2235 /* 2236 * Set up Linux device callins 2237 */ 2238 2239 spin_lock_init(&(sc->sbm_lock)); 2240 2241 dev->netdev_ops = &sbmac_netdev_ops; 2242 dev->watchdog_timeo = TX_TIMEOUT; 2243 2244 netif_napi_add(dev, &sc->napi, sbmac_poll, 16); 2245 2246 dev->irq = UNIT_INT(idx); 2247 2248 /* This is needed for PASS2 for Rx H/W checksum feature */ 2249 sbmac_set_iphdr_offset(sc); 2250 2251 sc->mii_bus = mdiobus_alloc(); 2252 if (sc->mii_bus == NULL) { 2253 err = -ENOMEM; 2254 goto uninit_ctx; 2255 } 2256 2257 sc->mii_bus->name = sbmac_mdio_string; 2258 snprintf(sc->mii_bus->id, MII_BUS_ID_SIZE, "%s-%x", 2259 pldev->name, idx); 2260 sc->mii_bus->priv = sc; 2261 sc->mii_bus->read = sbmac_mii_read; 2262 sc->mii_bus->write = sbmac_mii_write; 2263 sc->mii_bus->irq = sc->phy_irq; 2264 for (i = 0; i < PHY_MAX_ADDR; ++i) 2265 sc->mii_bus->irq[i] = SBMAC_PHY_INT; 2266 2267 sc->mii_bus->parent = &pldev->dev; 2268 /* 2269 * Probe PHY address 2270 */ 2271 err = mdiobus_register(sc->mii_bus); 2272 if (err) { 2273 printk(KERN_ERR "%s: unable to register MDIO bus\n", 2274 dev->name); 2275 goto free_mdio; 2276 } 2277 platform_set_drvdata(pldev, sc->mii_bus); 2278 2279 err = register_netdev(dev); 2280 if (err) { 2281 printk(KERN_ERR "%s.%d: unable to register netdev\n", 2282 sbmac_string, idx); 2283 goto unreg_mdio; 2284 } 2285 2286 pr_info("%s.%d: registered as %s\n", sbmac_string, idx, dev->name); 2287 2288 if (sc->rx_hw_checksum == ENABLE) 2289 pr_info("%s: enabling TCP rcv checksum\n", dev->name); 2290 2291 /* 2292 * Display Ethernet address (this is called during the config 2293 * process so we need to finish off the config message that 2294 * was being displayed) 2295 */ 2296 pr_info("%s: SiByte Ethernet at 0x%08Lx, address: %pM\n", 2297 dev->name, base, eaddr); 2298 2299 return 0; 2300unreg_mdio: 2301 mdiobus_unregister(sc->mii_bus); 2302free_mdio: 2303 mdiobus_free(sc->mii_bus); 2304uninit_ctx: 2305 sbmac_uninitctx(sc); 2306 return err; 2307} 2308 2309 2310static int sbmac_open(struct net_device *dev) 2311{ 2312 struct sbmac_softc *sc = netdev_priv(dev); 2313 int err; 2314 2315 if (debug > 1) 2316 pr_debug("%s: sbmac_open() irq %d.\n", dev->name, dev->irq); 2317 2318 /* 2319 * map/route interrupt (clear status first, in case something 2320 * weird is pending; we haven't initialized the mac registers 2321 * yet) 2322 */ 2323 2324 __raw_readq(sc->sbm_isr); 2325 err = request_irq(dev->irq, sbmac_intr, IRQF_SHARED, dev->name, dev); 2326 if (err) { 2327 printk(KERN_ERR "%s: unable to get IRQ %d\n", dev->name, 2328 dev->irq); 2329 goto out_err; 2330 } 2331 2332 sc->sbm_speed = sbmac_speed_none; 2333 sc->sbm_duplex = sbmac_duplex_none; 2334 sc->sbm_fc = sbmac_fc_none; 2335 sc->sbm_pause = -1; 2336 sc->sbm_link = 0; 2337 2338 /* 2339 * Attach to the PHY 2340 */ 2341 err = sbmac_mii_probe(dev); 2342 if (err) 2343 goto out_unregister; 2344 2345 /* 2346 * Turn on the channel 2347 */ 2348 2349 sbmac_set_channel_state(sc,sbmac_state_on); 2350 2351 netif_start_queue(dev); 2352 2353 sbmac_set_rx_mode(dev); 2354 2355 phy_start(sc->phy_dev); 2356 2357 napi_enable(&sc->napi); 2358 2359 return 0; 2360 2361out_unregister: 2362 free_irq(dev->irq, dev); 2363out_err: 2364 return err; 2365} 2366 2367static int sbmac_mii_probe(struct net_device *dev) 2368{ 2369 struct sbmac_softc *sc = netdev_priv(dev); 2370 struct phy_device *phy_dev; 2371 int i; 2372 2373 for (i = 0; i < PHY_MAX_ADDR; i++) { 2374 phy_dev = sc->mii_bus->phy_map[i]; 2375 if (phy_dev) 2376 break; 2377 } 2378 if (!phy_dev) { 2379 printk(KERN_ERR "%s: no PHY found\n", dev->name); 2380 return -ENXIO; 2381 } 2382 2383 phy_dev = phy_connect(dev, dev_name(&phy_dev->dev), &sbmac_mii_poll, 2384 PHY_INTERFACE_MODE_GMII); 2385 if (IS_ERR(phy_dev)) { 2386 printk(KERN_ERR "%s: could not attach to PHY\n", dev->name); 2387 return PTR_ERR(phy_dev); 2388 } 2389 2390 /* Remove any features not supported by the controller */ 2391 phy_dev->supported &= SUPPORTED_10baseT_Half | 2392 SUPPORTED_10baseT_Full | 2393 SUPPORTED_100baseT_Half | 2394 SUPPORTED_100baseT_Full | 2395 SUPPORTED_1000baseT_Half | 2396 SUPPORTED_1000baseT_Full | 2397 SUPPORTED_Autoneg | 2398 SUPPORTED_MII | 2399 SUPPORTED_Pause | 2400 SUPPORTED_Asym_Pause; 2401 phy_dev->advertising = phy_dev->supported; 2402 2403 pr_info("%s: attached PHY driver [%s] (mii_bus:phy_addr=%s, irq=%d)\n", 2404 dev->name, phy_dev->drv->name, 2405 dev_name(&phy_dev->dev), phy_dev->irq); 2406 2407 sc->phy_dev = phy_dev; 2408 2409 return 0; 2410} 2411 2412 2413static void sbmac_mii_poll(struct net_device *dev) 2414{ 2415 struct sbmac_softc *sc = netdev_priv(dev); 2416 struct phy_device *phy_dev = sc->phy_dev; 2417 unsigned long flags; 2418 enum sbmac_fc fc; 2419 int link_chg, speed_chg, duplex_chg, pause_chg, fc_chg; 2420 2421 link_chg = (sc->sbm_link != phy_dev->link); 2422 speed_chg = (sc->sbm_speed != phy_dev->speed); 2423 duplex_chg = (sc->sbm_duplex != phy_dev->duplex); 2424 pause_chg = (sc->sbm_pause != phy_dev->pause); 2425 2426 if (!link_chg && !speed_chg && !duplex_chg && !pause_chg) 2427 return; /* Hmmm... */ 2428 2429 if (!phy_dev->link) { 2430 if (link_chg) { 2431 sc->sbm_link = phy_dev->link; 2432 sc->sbm_speed = sbmac_speed_none; 2433 sc->sbm_duplex = sbmac_duplex_none; 2434 sc->sbm_fc = sbmac_fc_disabled; 2435 sc->sbm_pause = -1; 2436 pr_info("%s: link unavailable\n", dev->name); 2437 } 2438 return; 2439 } 2440 2441 if (phy_dev->duplex == DUPLEX_FULL) { 2442 if (phy_dev->pause) 2443 fc = sbmac_fc_frame; 2444 else 2445 fc = sbmac_fc_disabled; 2446 } else 2447 fc = sbmac_fc_collision; 2448 fc_chg = (sc->sbm_fc != fc); 2449 2450 pr_info("%s: link available: %dbase-%cD\n", dev->name, phy_dev->speed, 2451 phy_dev->duplex == DUPLEX_FULL ? 'F' : 'H'); 2452 2453 spin_lock_irqsave(&sc->sbm_lock, flags); 2454 2455 sc->sbm_speed = phy_dev->speed; 2456 sc->sbm_duplex = phy_dev->duplex; 2457 sc->sbm_fc = fc; 2458 sc->sbm_pause = phy_dev->pause; 2459 sc->sbm_link = phy_dev->link; 2460 2461 if ((speed_chg || duplex_chg || fc_chg) && 2462 sc->sbm_state != sbmac_state_off) { 2463 /* 2464 * something changed, restart the channel 2465 */ 2466 if (debug > 1) 2467 pr_debug("%s: restarting channel " 2468 "because PHY state changed\n", dev->name); 2469 sbmac_channel_stop(sc); 2470 sbmac_channel_start(sc); 2471 } 2472 2473 spin_unlock_irqrestore(&sc->sbm_lock, flags); 2474} 2475 2476 2477static void sbmac_tx_timeout (struct net_device *dev) 2478{ 2479 struct sbmac_softc *sc = netdev_priv(dev); 2480 unsigned long flags; 2481 2482 spin_lock_irqsave(&sc->sbm_lock, flags); 2483 2484 2485 dev->trans_start = jiffies; /* prevent tx timeout */ 2486 dev->stats.tx_errors++; 2487 2488 spin_unlock_irqrestore(&sc->sbm_lock, flags); 2489 2490 printk (KERN_WARNING "%s: Transmit timed out\n",dev->name); 2491} 2492 2493 2494 2495 2496static void sbmac_set_rx_mode(struct net_device *dev) 2497{ 2498 unsigned long flags; 2499 struct sbmac_softc *sc = netdev_priv(dev); 2500 2501 spin_lock_irqsave(&sc->sbm_lock, flags); 2502 if ((dev->flags ^ sc->sbm_devflags) & IFF_PROMISC) { 2503 /* 2504 * Promiscuous changed. 2505 */ 2506 2507 if (dev->flags & IFF_PROMISC) { 2508 sbmac_promiscuous_mode(sc,1); 2509 } 2510 else { 2511 sbmac_promiscuous_mode(sc,0); 2512 } 2513 } 2514 spin_unlock_irqrestore(&sc->sbm_lock, flags); 2515 2516 /* 2517 * Program the multicasts. Do this every time. 2518 */ 2519 2520 sbmac_setmulti(sc); 2521 2522} 2523 2524static int sbmac_mii_ioctl(struct net_device *dev, struct ifreq *rq, int cmd) 2525{ 2526 struct sbmac_softc *sc = netdev_priv(dev); 2527 2528 if (!netif_running(dev) || !sc->phy_dev) 2529 return -EINVAL; 2530 2531 return phy_mii_ioctl(sc->phy_dev, rq, cmd); 2532} 2533 2534static int sbmac_close(struct net_device *dev) 2535{ 2536 struct sbmac_softc *sc = netdev_priv(dev); 2537 2538 napi_disable(&sc->napi); 2539 2540 phy_stop(sc->phy_dev); 2541 2542 sbmac_set_channel_state(sc, sbmac_state_off); 2543 2544 netif_stop_queue(dev); 2545 2546 if (debug > 1) 2547 pr_debug("%s: Shutting down ethercard\n", dev->name); 2548 2549 phy_disconnect(sc->phy_dev); 2550 sc->phy_dev = NULL; 2551 free_irq(dev->irq, dev); 2552 2553 sbdma_emptyring(&(sc->sbm_txdma)); 2554 sbdma_emptyring(&(sc->sbm_rxdma)); 2555 2556 return 0; 2557} 2558 2559static int sbmac_poll(struct napi_struct *napi, int budget) 2560{ 2561 struct sbmac_softc *sc = container_of(napi, struct sbmac_softc, napi); 2562 int work_done; 2563 2564 work_done = sbdma_rx_process(sc, &(sc->sbm_rxdma), budget, 1); 2565 sbdma_tx_process(sc, &(sc->sbm_txdma), 1); 2566 2567 if (work_done < budget) { 2568 napi_complete(napi); 2569 2570#ifdef CONFIG_SBMAC_COALESCE 2571 __raw_writeq(((M_MAC_INT_EOP_COUNT | M_MAC_INT_EOP_TIMER) << S_MAC_TX_CH0) | 2572 ((M_MAC_INT_EOP_COUNT | M_MAC_INT_EOP_TIMER) << S_MAC_RX_CH0), 2573 sc->sbm_imr); 2574#else 2575 __raw_writeq((M_MAC_INT_CHANNEL << S_MAC_TX_CH0) | 2576 (M_MAC_INT_CHANNEL << S_MAC_RX_CH0), sc->sbm_imr); 2577#endif 2578 } 2579 2580 return work_done; 2581} 2582 2583 2584static int sbmac_probe(struct platform_device *pldev) 2585{ 2586 struct net_device *dev; 2587 struct sbmac_softc *sc; 2588 void __iomem *sbm_base; 2589 struct resource *res; 2590 u64 sbmac_orig_hwaddr; 2591 int err; 2592 2593 res = platform_get_resource(pldev, IORESOURCE_MEM, 0); 2594 BUG_ON(!res); 2595 sbm_base = ioremap_nocache(res->start, resource_size(res)); 2596 if (!sbm_base) { 2597 printk(KERN_ERR "%s: unable to map device registers\n", 2598 dev_name(&pldev->dev)); 2599 err = -ENOMEM; 2600 goto out_out; 2601 } 2602 2603 /* 2604 * The R_MAC_ETHERNET_ADDR register will be set to some nonzero 2605 * value for us by the firmware if we're going to use this MAC. 2606 * If we find a zero, skip this MAC. 2607 */ 2608 sbmac_orig_hwaddr = __raw_readq(sbm_base + R_MAC_ETHERNET_ADDR); 2609 pr_debug("%s: %sconfiguring MAC at 0x%08Lx\n", dev_name(&pldev->dev), 2610 sbmac_orig_hwaddr ? "" : "not ", (long long)res->start); 2611 if (sbmac_orig_hwaddr == 0) { 2612 err = 0; 2613 goto out_unmap; 2614 } 2615 2616 /* 2617 * Okay, cool. Initialize this MAC. 2618 */ 2619 dev = alloc_etherdev(sizeof(struct sbmac_softc)); 2620 if (!dev) { 2621 err = -ENOMEM; 2622 goto out_unmap; 2623 } 2624 2625 platform_set_drvdata(pldev, dev); 2626 SET_NETDEV_DEV(dev, &pldev->dev); 2627 2628 sc = netdev_priv(dev); 2629 sc->sbm_base = sbm_base; 2630 2631 err = sbmac_init(pldev, res->start); 2632 if (err) 2633 goto out_kfree; 2634 2635 return 0; 2636 2637out_kfree: 2638 free_netdev(dev); 2639 __raw_writeq(sbmac_orig_hwaddr, sbm_base + R_MAC_ETHERNET_ADDR); 2640 2641out_unmap: 2642 iounmap(sbm_base); 2643 2644out_out: 2645 return err; 2646} 2647 2648static int __exit sbmac_remove(struct platform_device *pldev) 2649{ 2650 struct net_device *dev = platform_get_drvdata(pldev); 2651 struct sbmac_softc *sc = netdev_priv(dev); 2652 2653 unregister_netdev(dev); 2654 sbmac_uninitctx(sc); 2655 mdiobus_unregister(sc->mii_bus); 2656 mdiobus_free(sc->mii_bus); 2657 iounmap(sc->sbm_base); 2658 free_netdev(dev); 2659 2660 return 0; 2661} 2662 2663static struct platform_driver sbmac_driver = { 2664 .probe = sbmac_probe, 2665 .remove = __exit_p(sbmac_remove), 2666 .driver = { 2667 .name = sbmac_string, 2668 .owner = THIS_MODULE, 2669 }, 2670}; 2671 2672module_platform_driver(sbmac_driver); 2673