sb1250-mac.c revision 720a43efd30f04a0a492c85fb997361c44fbae05
1/* 2 * Copyright (C) 2001,2002,2003,2004 Broadcom Corporation 3 * Copyright (c) 2006, 2007 Maciej W. Rozycki 4 * 5 * This program is free software; you can redistribute it and/or 6 * modify it under the terms of the GNU General Public License 7 * as published by the Free Software Foundation; either version 2 8 * of the License, or (at your option) any later version. 9 * 10 * This program is distributed in the hope that it will be useful, 11 * but WITHOUT ANY WARRANTY; without even the implied warranty of 12 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 13 * GNU General Public License for more details. 14 * 15 * You should have received a copy of the GNU General Public License 16 * along with this program; if not, write to the Free Software 17 * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. 18 * 19 * 20 * This driver is designed for the Broadcom SiByte SOC built-in 21 * Ethernet controllers. Written by Mitch Lichtenberg at Broadcom Corp. 22 * 23 * Updated to the driver model and the PHY abstraction layer 24 * by Maciej W. Rozycki. 25 */ 26 27#include <linux/bug.h> 28#include <linux/module.h> 29#include <linux/kernel.h> 30#include <linux/string.h> 31#include <linux/timer.h> 32#include <linux/errno.h> 33#include <linux/ioport.h> 34#include <linux/slab.h> 35#include <linux/interrupt.h> 36#include <linux/netdevice.h> 37#include <linux/etherdevice.h> 38#include <linux/skbuff.h> 39#include <linux/init.h> 40#include <linux/bitops.h> 41#include <linux/err.h> 42#include <linux/ethtool.h> 43#include <linux/mii.h> 44#include <linux/phy.h> 45#include <linux/platform_device.h> 46#include <linux/prefetch.h> 47 48#include <asm/cache.h> 49#include <asm/io.h> 50#include <asm/processor.h> /* Processor type for cache alignment. */ 51 52/* Operational parameters that usually are not changed. */ 53 54#define CONFIG_SBMAC_COALESCE 55 56/* Time in jiffies before concluding the transmitter is hung. */ 57#define TX_TIMEOUT (2*HZ) 58 59 60MODULE_AUTHOR("Mitch Lichtenberg (Broadcom Corp.)"); 61MODULE_DESCRIPTION("Broadcom SiByte SOC GB Ethernet driver"); 62 63/* A few user-configurable values which may be modified when a driver 64 module is loaded. */ 65 66/* 1 normal messages, 0 quiet .. 7 verbose. */ 67static int debug = 1; 68module_param(debug, int, S_IRUGO); 69MODULE_PARM_DESC(debug, "Debug messages"); 70 71#ifdef CONFIG_SBMAC_COALESCE 72static int int_pktcnt_tx = 255; 73module_param(int_pktcnt_tx, int, S_IRUGO); 74MODULE_PARM_DESC(int_pktcnt_tx, "TX packet count"); 75 76static int int_timeout_tx = 255; 77module_param(int_timeout_tx, int, S_IRUGO); 78MODULE_PARM_DESC(int_timeout_tx, "TX timeout value"); 79 80static int int_pktcnt_rx = 64; 81module_param(int_pktcnt_rx, int, S_IRUGO); 82MODULE_PARM_DESC(int_pktcnt_rx, "RX packet count"); 83 84static int int_timeout_rx = 64; 85module_param(int_timeout_rx, int, S_IRUGO); 86MODULE_PARM_DESC(int_timeout_rx, "RX timeout value"); 87#endif 88 89#include <asm/sibyte/board.h> 90#include <asm/sibyte/sb1250.h> 91#if defined(CONFIG_SIBYTE_BCM1x55) || defined(CONFIG_SIBYTE_BCM1x80) 92#include <asm/sibyte/bcm1480_regs.h> 93#include <asm/sibyte/bcm1480_int.h> 94#define R_MAC_DMA_OODPKTLOST_RX R_MAC_DMA_OODPKTLOST 95#elif defined(CONFIG_SIBYTE_SB1250) || defined(CONFIG_SIBYTE_BCM112X) 96#include <asm/sibyte/sb1250_regs.h> 97#include <asm/sibyte/sb1250_int.h> 98#else 99#error invalid SiByte MAC configuration 100#endif 101#include <asm/sibyte/sb1250_scd.h> 102#include <asm/sibyte/sb1250_mac.h> 103#include <asm/sibyte/sb1250_dma.h> 104 105#if defined(CONFIG_SIBYTE_BCM1x55) || defined(CONFIG_SIBYTE_BCM1x80) 106#define UNIT_INT(n) (K_BCM1480_INT_MAC_0 + ((n) * 2)) 107#elif defined(CONFIG_SIBYTE_SB1250) || defined(CONFIG_SIBYTE_BCM112X) 108#define UNIT_INT(n) (K_INT_MAC_0 + (n)) 109#else 110#error invalid SiByte MAC configuration 111#endif 112 113#ifdef K_INT_PHY 114#define SBMAC_PHY_INT K_INT_PHY 115#else 116#define SBMAC_PHY_INT PHY_POLL 117#endif 118 119/********************************************************************** 120 * Simple types 121 ********************************************************************* */ 122 123enum sbmac_speed { 124 sbmac_speed_none = 0, 125 sbmac_speed_10 = SPEED_10, 126 sbmac_speed_100 = SPEED_100, 127 sbmac_speed_1000 = SPEED_1000, 128}; 129 130enum sbmac_duplex { 131 sbmac_duplex_none = -1, 132 sbmac_duplex_half = DUPLEX_HALF, 133 sbmac_duplex_full = DUPLEX_FULL, 134}; 135 136enum sbmac_fc { 137 sbmac_fc_none, 138 sbmac_fc_disabled, 139 sbmac_fc_frame, 140 sbmac_fc_collision, 141 sbmac_fc_carrier, 142}; 143 144enum sbmac_state { 145 sbmac_state_uninit, 146 sbmac_state_off, 147 sbmac_state_on, 148 sbmac_state_broken, 149}; 150 151 152/********************************************************************** 153 * Macros 154 ********************************************************************* */ 155 156 157#define SBDMA_NEXTBUF(d,f) ((((d)->f+1) == (d)->sbdma_dscrtable_end) ? \ 158 (d)->sbdma_dscrtable : (d)->f+1) 159 160 161#define NUMCACHEBLKS(x) (((x)+SMP_CACHE_BYTES-1)/SMP_CACHE_BYTES) 162 163#define SBMAC_MAX_TXDESCR 256 164#define SBMAC_MAX_RXDESCR 256 165 166#define ENET_PACKET_SIZE 1518 167/*#define ENET_PACKET_SIZE 9216 */ 168 169/********************************************************************** 170 * DMA Descriptor structure 171 ********************************************************************* */ 172 173struct sbdmadscr { 174 uint64_t dscr_a; 175 uint64_t dscr_b; 176}; 177 178/********************************************************************** 179 * DMA Controller structure 180 ********************************************************************* */ 181 182struct sbmacdma { 183 184 /* 185 * This stuff is used to identify the channel and the registers 186 * associated with it. 187 */ 188 struct sbmac_softc *sbdma_eth; /* back pointer to associated 189 MAC */ 190 int sbdma_channel; /* channel number */ 191 int sbdma_txdir; /* direction (1=transmit) */ 192 int sbdma_maxdescr; /* total # of descriptors 193 in ring */ 194#ifdef CONFIG_SBMAC_COALESCE 195 int sbdma_int_pktcnt; 196 /* # descriptors rx/tx 197 before interrupt */ 198 int sbdma_int_timeout; 199 /* # usec rx/tx interrupt */ 200#endif 201 void __iomem *sbdma_config0; /* DMA config register 0 */ 202 void __iomem *sbdma_config1; /* DMA config register 1 */ 203 void __iomem *sbdma_dscrbase; 204 /* descriptor base address */ 205 void __iomem *sbdma_dscrcnt; /* descriptor count register */ 206 void __iomem *sbdma_curdscr; /* current descriptor 207 address */ 208 void __iomem *sbdma_oodpktlost; 209 /* pkt drop (rx only) */ 210 211 /* 212 * This stuff is for maintenance of the ring 213 */ 214 void *sbdma_dscrtable_unaligned; 215 struct sbdmadscr *sbdma_dscrtable; 216 /* base of descriptor table */ 217 struct sbdmadscr *sbdma_dscrtable_end; 218 /* end of descriptor table */ 219 struct sk_buff **sbdma_ctxtable; 220 /* context table, one 221 per descr */ 222 dma_addr_t sbdma_dscrtable_phys; 223 /* and also the phys addr */ 224 struct sbdmadscr *sbdma_addptr; /* next dscr for sw to add */ 225 struct sbdmadscr *sbdma_remptr; /* next dscr for sw 226 to remove */ 227}; 228 229 230/********************************************************************** 231 * Ethernet softc structure 232 ********************************************************************* */ 233 234struct sbmac_softc { 235 236 /* 237 * Linux-specific things 238 */ 239 struct net_device *sbm_dev; /* pointer to linux device */ 240 struct napi_struct napi; 241 struct phy_device *phy_dev; /* the associated PHY device */ 242 struct mii_bus *mii_bus; /* the MII bus */ 243 int phy_irq[PHY_MAX_ADDR]; 244 spinlock_t sbm_lock; /* spin lock */ 245 int sbm_devflags; /* current device flags */ 246 247 /* 248 * Controller-specific things 249 */ 250 void __iomem *sbm_base; /* MAC's base address */ 251 enum sbmac_state sbm_state; /* current state */ 252 253 void __iomem *sbm_macenable; /* MAC Enable Register */ 254 void __iomem *sbm_maccfg; /* MAC Config Register */ 255 void __iomem *sbm_fifocfg; /* FIFO Config Register */ 256 void __iomem *sbm_framecfg; /* Frame Config Register */ 257 void __iomem *sbm_rxfilter; /* Receive Filter Register */ 258 void __iomem *sbm_isr; /* Interrupt Status Register */ 259 void __iomem *sbm_imr; /* Interrupt Mask Register */ 260 void __iomem *sbm_mdio; /* MDIO Register */ 261 262 enum sbmac_speed sbm_speed; /* current speed */ 263 enum sbmac_duplex sbm_duplex; /* current duplex */ 264 enum sbmac_fc sbm_fc; /* cur. flow control setting */ 265 int sbm_pause; /* current pause setting */ 266 int sbm_link; /* current link state */ 267 268 unsigned char sbm_hwaddr[ETH_ALEN]; 269 270 struct sbmacdma sbm_txdma; /* only channel 0 for now */ 271 struct sbmacdma sbm_rxdma; 272 int rx_hw_checksum; 273 int sbe_idx; 274}; 275 276 277/********************************************************************** 278 * Externs 279 ********************************************************************* */ 280 281/********************************************************************** 282 * Prototypes 283 ********************************************************************* */ 284 285static void sbdma_initctx(struct sbmacdma *d, struct sbmac_softc *s, int chan, 286 int txrx, int maxdescr); 287static void sbdma_channel_start(struct sbmacdma *d, int rxtx); 288static int sbdma_add_rcvbuffer(struct sbmac_softc *sc, struct sbmacdma *d, 289 struct sk_buff *m); 290static int sbdma_add_txbuffer(struct sbmacdma *d, struct sk_buff *m); 291static void sbdma_emptyring(struct sbmacdma *d); 292static void sbdma_fillring(struct sbmac_softc *sc, struct sbmacdma *d); 293static int sbdma_rx_process(struct sbmac_softc *sc, struct sbmacdma *d, 294 int work_to_do, int poll); 295static void sbdma_tx_process(struct sbmac_softc *sc, struct sbmacdma *d, 296 int poll); 297static int sbmac_initctx(struct sbmac_softc *s); 298static void sbmac_channel_start(struct sbmac_softc *s); 299static void sbmac_channel_stop(struct sbmac_softc *s); 300static enum sbmac_state sbmac_set_channel_state(struct sbmac_softc *, 301 enum sbmac_state); 302static void sbmac_promiscuous_mode(struct sbmac_softc *sc, int onoff); 303static uint64_t sbmac_addr2reg(unsigned char *ptr); 304static irqreturn_t sbmac_intr(int irq, void *dev_instance); 305static int sbmac_start_tx(struct sk_buff *skb, struct net_device *dev); 306static void sbmac_setmulti(struct sbmac_softc *sc); 307static int sbmac_init(struct platform_device *pldev, long long base); 308static int sbmac_set_speed(struct sbmac_softc *s, enum sbmac_speed speed); 309static int sbmac_set_duplex(struct sbmac_softc *s, enum sbmac_duplex duplex, 310 enum sbmac_fc fc); 311 312static int sbmac_open(struct net_device *dev); 313static void sbmac_tx_timeout (struct net_device *dev); 314static void sbmac_set_rx_mode(struct net_device *dev); 315static int sbmac_mii_ioctl(struct net_device *dev, struct ifreq *rq, int cmd); 316static int sbmac_close(struct net_device *dev); 317static int sbmac_poll(struct napi_struct *napi, int budget); 318 319static void sbmac_mii_poll(struct net_device *dev); 320static int sbmac_mii_probe(struct net_device *dev); 321 322static void sbmac_mii_sync(void __iomem *sbm_mdio); 323static void sbmac_mii_senddata(void __iomem *sbm_mdio, unsigned int data, 324 int bitcnt); 325static int sbmac_mii_read(struct mii_bus *bus, int phyaddr, int regidx); 326static int sbmac_mii_write(struct mii_bus *bus, int phyaddr, int regidx, 327 u16 val); 328 329 330/********************************************************************** 331 * Globals 332 ********************************************************************* */ 333 334static char sbmac_string[] = "sb1250-mac"; 335 336static char sbmac_mdio_string[] = "sb1250-mac-mdio"; 337 338 339/********************************************************************** 340 * MDIO constants 341 ********************************************************************* */ 342 343#define MII_COMMAND_START 0x01 344#define MII_COMMAND_READ 0x02 345#define MII_COMMAND_WRITE 0x01 346#define MII_COMMAND_ACK 0x02 347 348#define M_MAC_MDIO_DIR_OUTPUT 0 /* for clarity */ 349 350#define ENABLE 1 351#define DISABLE 0 352 353/********************************************************************** 354 * SBMAC_MII_SYNC(sbm_mdio) 355 * 356 * Synchronize with the MII - send a pattern of bits to the MII 357 * that will guarantee that it is ready to accept a command. 358 * 359 * Input parameters: 360 * sbm_mdio - address of the MAC's MDIO register 361 * 362 * Return value: 363 * nothing 364 ********************************************************************* */ 365 366static void sbmac_mii_sync(void __iomem *sbm_mdio) 367{ 368 int cnt; 369 uint64_t bits; 370 int mac_mdio_genc; 371 372 mac_mdio_genc = __raw_readq(sbm_mdio) & M_MAC_GENC; 373 374 bits = M_MAC_MDIO_DIR_OUTPUT | M_MAC_MDIO_OUT; 375 376 __raw_writeq(bits | mac_mdio_genc, sbm_mdio); 377 378 for (cnt = 0; cnt < 32; cnt++) { 379 __raw_writeq(bits | M_MAC_MDC | mac_mdio_genc, sbm_mdio); 380 __raw_writeq(bits | mac_mdio_genc, sbm_mdio); 381 } 382} 383 384/********************************************************************** 385 * SBMAC_MII_SENDDATA(sbm_mdio, data, bitcnt) 386 * 387 * Send some bits to the MII. The bits to be sent are right- 388 * justified in the 'data' parameter. 389 * 390 * Input parameters: 391 * sbm_mdio - address of the MAC's MDIO register 392 * data - data to send 393 * bitcnt - number of bits to send 394 ********************************************************************* */ 395 396static void sbmac_mii_senddata(void __iomem *sbm_mdio, unsigned int data, 397 int bitcnt) 398{ 399 int i; 400 uint64_t bits; 401 unsigned int curmask; 402 int mac_mdio_genc; 403 404 mac_mdio_genc = __raw_readq(sbm_mdio) & M_MAC_GENC; 405 406 bits = M_MAC_MDIO_DIR_OUTPUT; 407 __raw_writeq(bits | mac_mdio_genc, sbm_mdio); 408 409 curmask = 1 << (bitcnt - 1); 410 411 for (i = 0; i < bitcnt; i++) { 412 if (data & curmask) 413 bits |= M_MAC_MDIO_OUT; 414 else bits &= ~M_MAC_MDIO_OUT; 415 __raw_writeq(bits | mac_mdio_genc, sbm_mdio); 416 __raw_writeq(bits | M_MAC_MDC | mac_mdio_genc, sbm_mdio); 417 __raw_writeq(bits | mac_mdio_genc, sbm_mdio); 418 curmask >>= 1; 419 } 420} 421 422 423 424/********************************************************************** 425 * SBMAC_MII_READ(bus, phyaddr, regidx) 426 * Read a PHY register. 427 * 428 * Input parameters: 429 * bus - MDIO bus handle 430 * phyaddr - PHY's address 431 * regnum - index of register to read 432 * 433 * Return value: 434 * value read, or 0xffff if an error occurred. 435 ********************************************************************* */ 436 437static int sbmac_mii_read(struct mii_bus *bus, int phyaddr, int regidx) 438{ 439 struct sbmac_softc *sc = (struct sbmac_softc *)bus->priv; 440 void __iomem *sbm_mdio = sc->sbm_mdio; 441 int idx; 442 int error; 443 int regval; 444 int mac_mdio_genc; 445 446 /* 447 * Synchronize ourselves so that the PHY knows the next 448 * thing coming down is a command 449 */ 450 sbmac_mii_sync(sbm_mdio); 451 452 /* 453 * Send the data to the PHY. The sequence is 454 * a "start" command (2 bits) 455 * a "read" command (2 bits) 456 * the PHY addr (5 bits) 457 * the register index (5 bits) 458 */ 459 sbmac_mii_senddata(sbm_mdio, MII_COMMAND_START, 2); 460 sbmac_mii_senddata(sbm_mdio, MII_COMMAND_READ, 2); 461 sbmac_mii_senddata(sbm_mdio, phyaddr, 5); 462 sbmac_mii_senddata(sbm_mdio, regidx, 5); 463 464 mac_mdio_genc = __raw_readq(sbm_mdio) & M_MAC_GENC; 465 466 /* 467 * Switch the port around without a clock transition. 468 */ 469 __raw_writeq(M_MAC_MDIO_DIR_INPUT | mac_mdio_genc, sbm_mdio); 470 471 /* 472 * Send out a clock pulse to signal we want the status 473 */ 474 __raw_writeq(M_MAC_MDIO_DIR_INPUT | M_MAC_MDC | mac_mdio_genc, 475 sbm_mdio); 476 __raw_writeq(M_MAC_MDIO_DIR_INPUT | mac_mdio_genc, sbm_mdio); 477 478 /* 479 * If an error occurred, the PHY will signal '1' back 480 */ 481 error = __raw_readq(sbm_mdio) & M_MAC_MDIO_IN; 482 483 /* 484 * Issue an 'idle' clock pulse, but keep the direction 485 * the same. 486 */ 487 __raw_writeq(M_MAC_MDIO_DIR_INPUT | M_MAC_MDC | mac_mdio_genc, 488 sbm_mdio); 489 __raw_writeq(M_MAC_MDIO_DIR_INPUT | mac_mdio_genc, sbm_mdio); 490 491 regval = 0; 492 493 for (idx = 0; idx < 16; idx++) { 494 regval <<= 1; 495 496 if (error == 0) { 497 if (__raw_readq(sbm_mdio) & M_MAC_MDIO_IN) 498 regval |= 1; 499 } 500 501 __raw_writeq(M_MAC_MDIO_DIR_INPUT | M_MAC_MDC | mac_mdio_genc, 502 sbm_mdio); 503 __raw_writeq(M_MAC_MDIO_DIR_INPUT | mac_mdio_genc, sbm_mdio); 504 } 505 506 /* Switch back to output */ 507 __raw_writeq(M_MAC_MDIO_DIR_OUTPUT | mac_mdio_genc, sbm_mdio); 508 509 if (error == 0) 510 return regval; 511 return 0xffff; 512} 513 514 515/********************************************************************** 516 * SBMAC_MII_WRITE(bus, phyaddr, regidx, regval) 517 * 518 * Write a value to a PHY register. 519 * 520 * Input parameters: 521 * bus - MDIO bus handle 522 * phyaddr - PHY to use 523 * regidx - register within the PHY 524 * regval - data to write to register 525 * 526 * Return value: 527 * 0 for success 528 ********************************************************************* */ 529 530static int sbmac_mii_write(struct mii_bus *bus, int phyaddr, int regidx, 531 u16 regval) 532{ 533 struct sbmac_softc *sc = (struct sbmac_softc *)bus->priv; 534 void __iomem *sbm_mdio = sc->sbm_mdio; 535 int mac_mdio_genc; 536 537 sbmac_mii_sync(sbm_mdio); 538 539 sbmac_mii_senddata(sbm_mdio, MII_COMMAND_START, 2); 540 sbmac_mii_senddata(sbm_mdio, MII_COMMAND_WRITE, 2); 541 sbmac_mii_senddata(sbm_mdio, phyaddr, 5); 542 sbmac_mii_senddata(sbm_mdio, regidx, 5); 543 sbmac_mii_senddata(sbm_mdio, MII_COMMAND_ACK, 2); 544 sbmac_mii_senddata(sbm_mdio, regval, 16); 545 546 mac_mdio_genc = __raw_readq(sbm_mdio) & M_MAC_GENC; 547 548 __raw_writeq(M_MAC_MDIO_DIR_OUTPUT | mac_mdio_genc, sbm_mdio); 549 550 return 0; 551} 552 553 554 555/********************************************************************** 556 * SBDMA_INITCTX(d,s,chan,txrx,maxdescr) 557 * 558 * Initialize a DMA channel context. Since there are potentially 559 * eight DMA channels per MAC, it's nice to do this in a standard 560 * way. 561 * 562 * Input parameters: 563 * d - struct sbmacdma (DMA channel context) 564 * s - struct sbmac_softc (pointer to a MAC) 565 * chan - channel number (0..1 right now) 566 * txrx - Identifies DMA_TX or DMA_RX for channel direction 567 * maxdescr - number of descriptors 568 * 569 * Return value: 570 * nothing 571 ********************************************************************* */ 572 573static void sbdma_initctx(struct sbmacdma *d, struct sbmac_softc *s, int chan, 574 int txrx, int maxdescr) 575{ 576#ifdef CONFIG_SBMAC_COALESCE 577 int int_pktcnt, int_timeout; 578#endif 579 580 /* 581 * Save away interesting stuff in the structure 582 */ 583 584 d->sbdma_eth = s; 585 d->sbdma_channel = chan; 586 d->sbdma_txdir = txrx; 587 588#if 0 589 /* RMON clearing */ 590 s->sbe_idx =(s->sbm_base - A_MAC_BASE_0)/MAC_SPACING; 591#endif 592 593 __raw_writeq(0, s->sbm_base + R_MAC_RMON_TX_BYTES); 594 __raw_writeq(0, s->sbm_base + R_MAC_RMON_COLLISIONS); 595 __raw_writeq(0, s->sbm_base + R_MAC_RMON_LATE_COL); 596 __raw_writeq(0, s->sbm_base + R_MAC_RMON_EX_COL); 597 __raw_writeq(0, s->sbm_base + R_MAC_RMON_FCS_ERROR); 598 __raw_writeq(0, s->sbm_base + R_MAC_RMON_TX_ABORT); 599 __raw_writeq(0, s->sbm_base + R_MAC_RMON_TX_BAD); 600 __raw_writeq(0, s->sbm_base + R_MAC_RMON_TX_GOOD); 601 __raw_writeq(0, s->sbm_base + R_MAC_RMON_TX_RUNT); 602 __raw_writeq(0, s->sbm_base + R_MAC_RMON_TX_OVERSIZE); 603 __raw_writeq(0, s->sbm_base + R_MAC_RMON_RX_BYTES); 604 __raw_writeq(0, s->sbm_base + R_MAC_RMON_RX_MCAST); 605 __raw_writeq(0, s->sbm_base + R_MAC_RMON_RX_BCAST); 606 __raw_writeq(0, s->sbm_base + R_MAC_RMON_RX_BAD); 607 __raw_writeq(0, s->sbm_base + R_MAC_RMON_RX_GOOD); 608 __raw_writeq(0, s->sbm_base + R_MAC_RMON_RX_RUNT); 609 __raw_writeq(0, s->sbm_base + R_MAC_RMON_RX_OVERSIZE); 610 __raw_writeq(0, s->sbm_base + R_MAC_RMON_RX_FCS_ERROR); 611 __raw_writeq(0, s->sbm_base + R_MAC_RMON_RX_LENGTH_ERROR); 612 __raw_writeq(0, s->sbm_base + R_MAC_RMON_RX_CODE_ERROR); 613 __raw_writeq(0, s->sbm_base + R_MAC_RMON_RX_ALIGN_ERROR); 614 615 /* 616 * initialize register pointers 617 */ 618 619 d->sbdma_config0 = 620 s->sbm_base + R_MAC_DMA_REGISTER(txrx,chan,R_MAC_DMA_CONFIG0); 621 d->sbdma_config1 = 622 s->sbm_base + R_MAC_DMA_REGISTER(txrx,chan,R_MAC_DMA_CONFIG1); 623 d->sbdma_dscrbase = 624 s->sbm_base + R_MAC_DMA_REGISTER(txrx,chan,R_MAC_DMA_DSCR_BASE); 625 d->sbdma_dscrcnt = 626 s->sbm_base + R_MAC_DMA_REGISTER(txrx,chan,R_MAC_DMA_DSCR_CNT); 627 d->sbdma_curdscr = 628 s->sbm_base + R_MAC_DMA_REGISTER(txrx,chan,R_MAC_DMA_CUR_DSCRADDR); 629 if (d->sbdma_txdir) 630 d->sbdma_oodpktlost = NULL; 631 else 632 d->sbdma_oodpktlost = 633 s->sbm_base + R_MAC_DMA_REGISTER(txrx,chan,R_MAC_DMA_OODPKTLOST_RX); 634 635 /* 636 * Allocate memory for the ring 637 */ 638 639 d->sbdma_maxdescr = maxdescr; 640 641 d->sbdma_dscrtable_unaligned = kcalloc(d->sbdma_maxdescr + 1, 642 sizeof(*d->sbdma_dscrtable), 643 GFP_KERNEL); 644 645 /* 646 * The descriptor table must be aligned to at least 16 bytes or the 647 * MAC will corrupt it. 648 */ 649 d->sbdma_dscrtable = (struct sbdmadscr *) 650 ALIGN((unsigned long)d->sbdma_dscrtable_unaligned, 651 sizeof(*d->sbdma_dscrtable)); 652 653 d->sbdma_dscrtable_end = d->sbdma_dscrtable + d->sbdma_maxdescr; 654 655 d->sbdma_dscrtable_phys = virt_to_phys(d->sbdma_dscrtable); 656 657 /* 658 * And context table 659 */ 660 661 d->sbdma_ctxtable = kcalloc(d->sbdma_maxdescr, 662 sizeof(*d->sbdma_ctxtable), GFP_KERNEL); 663 664#ifdef CONFIG_SBMAC_COALESCE 665 /* 666 * Setup Rx/Tx DMA coalescing defaults 667 */ 668 669 int_pktcnt = (txrx == DMA_TX) ? int_pktcnt_tx : int_pktcnt_rx; 670 if ( int_pktcnt ) { 671 d->sbdma_int_pktcnt = int_pktcnt; 672 } else { 673 d->sbdma_int_pktcnt = 1; 674 } 675 676 int_timeout = (txrx == DMA_TX) ? int_timeout_tx : int_timeout_rx; 677 if ( int_timeout ) { 678 d->sbdma_int_timeout = int_timeout; 679 } else { 680 d->sbdma_int_timeout = 0; 681 } 682#endif 683 684} 685 686/********************************************************************** 687 * SBDMA_CHANNEL_START(d) 688 * 689 * Initialize the hardware registers for a DMA channel. 690 * 691 * Input parameters: 692 * d - DMA channel to init (context must be previously init'd 693 * rxtx - DMA_RX or DMA_TX depending on what type of channel 694 * 695 * Return value: 696 * nothing 697 ********************************************************************* */ 698 699static void sbdma_channel_start(struct sbmacdma *d, int rxtx) 700{ 701 /* 702 * Turn on the DMA channel 703 */ 704 705#ifdef CONFIG_SBMAC_COALESCE 706 __raw_writeq(V_DMA_INT_TIMEOUT(d->sbdma_int_timeout) | 707 0, d->sbdma_config1); 708 __raw_writeq(M_DMA_EOP_INT_EN | 709 V_DMA_RINGSZ(d->sbdma_maxdescr) | 710 V_DMA_INT_PKTCNT(d->sbdma_int_pktcnt) | 711 0, d->sbdma_config0); 712#else 713 __raw_writeq(0, d->sbdma_config1); 714 __raw_writeq(V_DMA_RINGSZ(d->sbdma_maxdescr) | 715 0, d->sbdma_config0); 716#endif 717 718 __raw_writeq(d->sbdma_dscrtable_phys, d->sbdma_dscrbase); 719 720 /* 721 * Initialize ring pointers 722 */ 723 724 d->sbdma_addptr = d->sbdma_dscrtable; 725 d->sbdma_remptr = d->sbdma_dscrtable; 726} 727 728/********************************************************************** 729 * SBDMA_CHANNEL_STOP(d) 730 * 731 * Initialize the hardware registers for a DMA channel. 732 * 733 * Input parameters: 734 * d - DMA channel to init (context must be previously init'd 735 * 736 * Return value: 737 * nothing 738 ********************************************************************* */ 739 740static void sbdma_channel_stop(struct sbmacdma *d) 741{ 742 /* 743 * Turn off the DMA channel 744 */ 745 746 __raw_writeq(0, d->sbdma_config1); 747 748 __raw_writeq(0, d->sbdma_dscrbase); 749 750 __raw_writeq(0, d->sbdma_config0); 751 752 /* 753 * Zero ring pointers 754 */ 755 756 d->sbdma_addptr = NULL; 757 d->sbdma_remptr = NULL; 758} 759 760static inline void sbdma_align_skb(struct sk_buff *skb, 761 unsigned int power2, unsigned int offset) 762{ 763 unsigned char *addr = skb->data; 764 unsigned char *newaddr = PTR_ALIGN(addr, power2); 765 766 skb_reserve(skb, newaddr - addr + offset); 767} 768 769 770/********************************************************************** 771 * SBDMA_ADD_RCVBUFFER(d,sb) 772 * 773 * Add a buffer to the specified DMA channel. For receive channels, 774 * this queues a buffer for inbound packets. 775 * 776 * Input parameters: 777 * sc - softc structure 778 * d - DMA channel descriptor 779 * sb - sk_buff to add, or NULL if we should allocate one 780 * 781 * Return value: 782 * 0 if buffer could not be added (ring is full) 783 * 1 if buffer added successfully 784 ********************************************************************* */ 785 786 787static int sbdma_add_rcvbuffer(struct sbmac_softc *sc, struct sbmacdma *d, 788 struct sk_buff *sb) 789{ 790 struct net_device *dev = sc->sbm_dev; 791 struct sbdmadscr *dsc; 792 struct sbdmadscr *nextdsc; 793 struct sk_buff *sb_new = NULL; 794 int pktsize = ENET_PACKET_SIZE; 795 796 /* get pointer to our current place in the ring */ 797 798 dsc = d->sbdma_addptr; 799 nextdsc = SBDMA_NEXTBUF(d,sbdma_addptr); 800 801 /* 802 * figure out if the ring is full - if the next descriptor 803 * is the same as the one that we're going to remove from 804 * the ring, the ring is full 805 */ 806 807 if (nextdsc == d->sbdma_remptr) { 808 return -ENOSPC; 809 } 810 811 /* 812 * Allocate a sk_buff if we don't already have one. 813 * If we do have an sk_buff, reset it so that it's empty. 814 * 815 * Note: sk_buffs don't seem to be guaranteed to have any sort 816 * of alignment when they are allocated. Therefore, allocate enough 817 * extra space to make sure that: 818 * 819 * 1. the data does not start in the middle of a cache line. 820 * 2. The data does not end in the middle of a cache line 821 * 3. The buffer can be aligned such that the IP addresses are 822 * naturally aligned. 823 * 824 * Remember, the SOCs MAC writes whole cache lines at a time, 825 * without reading the old contents first. So, if the sk_buff's 826 * data portion starts in the middle of a cache line, the SOC 827 * DMA will trash the beginning (and ending) portions. 828 */ 829 830 if (sb == NULL) { 831 sb_new = netdev_alloc_skb(dev, ENET_PACKET_SIZE + 832 SMP_CACHE_BYTES * 2 + 833 NET_IP_ALIGN); 834 if (sb_new == NULL) 835 return -ENOBUFS; 836 837 sbdma_align_skb(sb_new, SMP_CACHE_BYTES, NET_IP_ALIGN); 838 } 839 else { 840 sb_new = sb; 841 /* 842 * nothing special to reinit buffer, it's already aligned 843 * and sb->data already points to a good place. 844 */ 845 } 846 847 /* 848 * fill in the descriptor 849 */ 850 851#ifdef CONFIG_SBMAC_COALESCE 852 /* 853 * Do not interrupt per DMA transfer. 854 */ 855 dsc->dscr_a = virt_to_phys(sb_new->data) | 856 V_DMA_DSCRA_A_SIZE(NUMCACHEBLKS(pktsize + NET_IP_ALIGN)) | 0; 857#else 858 dsc->dscr_a = virt_to_phys(sb_new->data) | 859 V_DMA_DSCRA_A_SIZE(NUMCACHEBLKS(pktsize + NET_IP_ALIGN)) | 860 M_DMA_DSCRA_INTERRUPT; 861#endif 862 863 /* receiving: no options */ 864 dsc->dscr_b = 0; 865 866 /* 867 * fill in the context 868 */ 869 870 d->sbdma_ctxtable[dsc-d->sbdma_dscrtable] = sb_new; 871 872 /* 873 * point at next packet 874 */ 875 876 d->sbdma_addptr = nextdsc; 877 878 /* 879 * Give the buffer to the DMA engine. 880 */ 881 882 __raw_writeq(1, d->sbdma_dscrcnt); 883 884 return 0; /* we did it */ 885} 886 887/********************************************************************** 888 * SBDMA_ADD_TXBUFFER(d,sb) 889 * 890 * Add a transmit buffer to the specified DMA channel, causing a 891 * transmit to start. 892 * 893 * Input parameters: 894 * d - DMA channel descriptor 895 * sb - sk_buff to add 896 * 897 * Return value: 898 * 0 transmit queued successfully 899 * otherwise error code 900 ********************************************************************* */ 901 902 903static int sbdma_add_txbuffer(struct sbmacdma *d, struct sk_buff *sb) 904{ 905 struct sbdmadscr *dsc; 906 struct sbdmadscr *nextdsc; 907 uint64_t phys; 908 uint64_t ncb; 909 int length; 910 911 /* get pointer to our current place in the ring */ 912 913 dsc = d->sbdma_addptr; 914 nextdsc = SBDMA_NEXTBUF(d,sbdma_addptr); 915 916 /* 917 * figure out if the ring is full - if the next descriptor 918 * is the same as the one that we're going to remove from 919 * the ring, the ring is full 920 */ 921 922 if (nextdsc == d->sbdma_remptr) { 923 return -ENOSPC; 924 } 925 926 /* 927 * Under Linux, it's not necessary to copy/coalesce buffers 928 * like it is on NetBSD. We think they're all contiguous, 929 * but that may not be true for GBE. 930 */ 931 932 length = sb->len; 933 934 /* 935 * fill in the descriptor. Note that the number of cache 936 * blocks in the descriptor is the number of blocks 937 * *spanned*, so we need to add in the offset (if any) 938 * while doing the calculation. 939 */ 940 941 phys = virt_to_phys(sb->data); 942 ncb = NUMCACHEBLKS(length+(phys & (SMP_CACHE_BYTES - 1))); 943 944 dsc->dscr_a = phys | 945 V_DMA_DSCRA_A_SIZE(ncb) | 946#ifndef CONFIG_SBMAC_COALESCE 947 M_DMA_DSCRA_INTERRUPT | 948#endif 949 M_DMA_ETHTX_SOP; 950 951 /* transmitting: set outbound options and length */ 952 953 dsc->dscr_b = V_DMA_DSCRB_OPTIONS(K_DMA_ETHTX_APPENDCRC_APPENDPAD) | 954 V_DMA_DSCRB_PKT_SIZE(length); 955 956 /* 957 * fill in the context 958 */ 959 960 d->sbdma_ctxtable[dsc-d->sbdma_dscrtable] = sb; 961 962 /* 963 * point at next packet 964 */ 965 966 d->sbdma_addptr = nextdsc; 967 968 /* 969 * Give the buffer to the DMA engine. 970 */ 971 972 __raw_writeq(1, d->sbdma_dscrcnt); 973 974 return 0; /* we did it */ 975} 976 977 978 979 980/********************************************************************** 981 * SBDMA_EMPTYRING(d) 982 * 983 * Free all allocated sk_buffs on the specified DMA channel; 984 * 985 * Input parameters: 986 * d - DMA channel 987 * 988 * Return value: 989 * nothing 990 ********************************************************************* */ 991 992static void sbdma_emptyring(struct sbmacdma *d) 993{ 994 int idx; 995 struct sk_buff *sb; 996 997 for (idx = 0; idx < d->sbdma_maxdescr; idx++) { 998 sb = d->sbdma_ctxtable[idx]; 999 if (sb) { 1000 dev_kfree_skb(sb); 1001 d->sbdma_ctxtable[idx] = NULL; 1002 } 1003 } 1004} 1005 1006 1007/********************************************************************** 1008 * SBDMA_FILLRING(d) 1009 * 1010 * Fill the specified DMA channel (must be receive channel) 1011 * with sk_buffs 1012 * 1013 * Input parameters: 1014 * sc - softc structure 1015 * d - DMA channel 1016 * 1017 * Return value: 1018 * nothing 1019 ********************************************************************* */ 1020 1021static void sbdma_fillring(struct sbmac_softc *sc, struct sbmacdma *d) 1022{ 1023 int idx; 1024 1025 for (idx = 0; idx < SBMAC_MAX_RXDESCR - 1; idx++) { 1026 if (sbdma_add_rcvbuffer(sc, d, NULL) != 0) 1027 break; 1028 } 1029} 1030 1031#ifdef CONFIG_NET_POLL_CONTROLLER 1032static void sbmac_netpoll(struct net_device *netdev) 1033{ 1034 struct sbmac_softc *sc = netdev_priv(netdev); 1035 int irq = sc->sbm_dev->irq; 1036 1037 __raw_writeq(0, sc->sbm_imr); 1038 1039 sbmac_intr(irq, netdev); 1040 1041#ifdef CONFIG_SBMAC_COALESCE 1042 __raw_writeq(((M_MAC_INT_EOP_COUNT | M_MAC_INT_EOP_TIMER) << S_MAC_TX_CH0) | 1043 ((M_MAC_INT_EOP_COUNT | M_MAC_INT_EOP_TIMER) << S_MAC_RX_CH0), 1044 sc->sbm_imr); 1045#else 1046 __raw_writeq((M_MAC_INT_CHANNEL << S_MAC_TX_CH0) | 1047 (M_MAC_INT_CHANNEL << S_MAC_RX_CH0), sc->sbm_imr); 1048#endif 1049} 1050#endif 1051 1052/********************************************************************** 1053 * SBDMA_RX_PROCESS(sc,d,work_to_do,poll) 1054 * 1055 * Process "completed" receive buffers on the specified DMA channel. 1056 * 1057 * Input parameters: 1058 * sc - softc structure 1059 * d - DMA channel context 1060 * work_to_do - no. of packets to process before enabling interrupt 1061 * again (for NAPI) 1062 * poll - 1: using polling (for NAPI) 1063 * 1064 * Return value: 1065 * nothing 1066 ********************************************************************* */ 1067 1068static int sbdma_rx_process(struct sbmac_softc *sc, struct sbmacdma *d, 1069 int work_to_do, int poll) 1070{ 1071 struct net_device *dev = sc->sbm_dev; 1072 int curidx; 1073 int hwidx; 1074 struct sbdmadscr *dsc; 1075 struct sk_buff *sb; 1076 int len; 1077 int work_done = 0; 1078 int dropped = 0; 1079 1080 prefetch(d); 1081 1082again: 1083 /* Check if the HW dropped any frames */ 1084 dev->stats.rx_fifo_errors 1085 += __raw_readq(sc->sbm_rxdma.sbdma_oodpktlost) & 0xffff; 1086 __raw_writeq(0, sc->sbm_rxdma.sbdma_oodpktlost); 1087 1088 while (work_to_do-- > 0) { 1089 /* 1090 * figure out where we are (as an index) and where 1091 * the hardware is (also as an index) 1092 * 1093 * This could be done faster if (for example) the 1094 * descriptor table was page-aligned and contiguous in 1095 * both virtual and physical memory -- you could then 1096 * just compare the low-order bits of the virtual address 1097 * (sbdma_remptr) and the physical address (sbdma_curdscr CSR) 1098 */ 1099 1100 dsc = d->sbdma_remptr; 1101 curidx = dsc - d->sbdma_dscrtable; 1102 1103 prefetch(dsc); 1104 prefetch(&d->sbdma_ctxtable[curidx]); 1105 1106 hwidx = ((__raw_readq(d->sbdma_curdscr) & M_DMA_CURDSCR_ADDR) - 1107 d->sbdma_dscrtable_phys) / 1108 sizeof(*d->sbdma_dscrtable); 1109 1110 /* 1111 * If they're the same, that means we've processed all 1112 * of the descriptors up to (but not including) the one that 1113 * the hardware is working on right now. 1114 */ 1115 1116 if (curidx == hwidx) 1117 goto done; 1118 1119 /* 1120 * Otherwise, get the packet's sk_buff ptr back 1121 */ 1122 1123 sb = d->sbdma_ctxtable[curidx]; 1124 d->sbdma_ctxtable[curidx] = NULL; 1125 1126 len = (int)G_DMA_DSCRB_PKT_SIZE(dsc->dscr_b) - 4; 1127 1128 /* 1129 * Check packet status. If good, process it. 1130 * If not, silently drop it and put it back on the 1131 * receive ring. 1132 */ 1133 1134 if (likely (!(dsc->dscr_a & M_DMA_ETHRX_BAD))) { 1135 1136 /* 1137 * Add a new buffer to replace the old one. If we fail 1138 * to allocate a buffer, we're going to drop this 1139 * packet and put it right back on the receive ring. 1140 */ 1141 1142 if (unlikely(sbdma_add_rcvbuffer(sc, d, NULL) == 1143 -ENOBUFS)) { 1144 dev->stats.rx_dropped++; 1145 /* Re-add old buffer */ 1146 sbdma_add_rcvbuffer(sc, d, sb); 1147 /* No point in continuing at the moment */ 1148 printk(KERN_ERR "dropped packet (1)\n"); 1149 d->sbdma_remptr = SBDMA_NEXTBUF(d,sbdma_remptr); 1150 goto done; 1151 } else { 1152 /* 1153 * Set length into the packet 1154 */ 1155 skb_put(sb,len); 1156 1157 /* 1158 * Buffer has been replaced on the 1159 * receive ring. Pass the buffer to 1160 * the kernel 1161 */ 1162 sb->protocol = eth_type_trans(sb,d->sbdma_eth->sbm_dev); 1163 /* Check hw IPv4/TCP checksum if supported */ 1164 if (sc->rx_hw_checksum == ENABLE) { 1165 if (!((dsc->dscr_a) & M_DMA_ETHRX_BADIP4CS) && 1166 !((dsc->dscr_a) & M_DMA_ETHRX_BADTCPCS)) { 1167 sb->ip_summed = CHECKSUM_UNNECESSARY; 1168 /* don't need to set sb->csum */ 1169 } else { 1170 skb_checksum_none_assert(sb); 1171 } 1172 } 1173 prefetch(sb->data); 1174 prefetch((const void *)(((char *)sb->data)+32)); 1175 if (poll) 1176 dropped = netif_receive_skb(sb); 1177 else 1178 dropped = netif_rx(sb); 1179 1180 if (dropped == NET_RX_DROP) { 1181 dev->stats.rx_dropped++; 1182 d->sbdma_remptr = SBDMA_NEXTBUF(d,sbdma_remptr); 1183 goto done; 1184 } 1185 else { 1186 dev->stats.rx_bytes += len; 1187 dev->stats.rx_packets++; 1188 } 1189 } 1190 } else { 1191 /* 1192 * Packet was mangled somehow. Just drop it and 1193 * put it back on the receive ring. 1194 */ 1195 dev->stats.rx_errors++; 1196 sbdma_add_rcvbuffer(sc, d, sb); 1197 } 1198 1199 1200 /* 1201 * .. and advance to the next buffer. 1202 */ 1203 1204 d->sbdma_remptr = SBDMA_NEXTBUF(d,sbdma_remptr); 1205 work_done++; 1206 } 1207 if (!poll) { 1208 work_to_do = 32; 1209 goto again; /* collect fifo drop statistics again */ 1210 } 1211done: 1212 return work_done; 1213} 1214 1215/********************************************************************** 1216 * SBDMA_TX_PROCESS(sc,d) 1217 * 1218 * Process "completed" transmit buffers on the specified DMA channel. 1219 * This is normally called within the interrupt service routine. 1220 * Note that this isn't really ideal for priority channels, since 1221 * it processes all of the packets on a given channel before 1222 * returning. 1223 * 1224 * Input parameters: 1225 * sc - softc structure 1226 * d - DMA channel context 1227 * poll - 1: using polling (for NAPI) 1228 * 1229 * Return value: 1230 * nothing 1231 ********************************************************************* */ 1232 1233static void sbdma_tx_process(struct sbmac_softc *sc, struct sbmacdma *d, 1234 int poll) 1235{ 1236 struct net_device *dev = sc->sbm_dev; 1237 int curidx; 1238 int hwidx; 1239 struct sbdmadscr *dsc; 1240 struct sk_buff *sb; 1241 unsigned long flags; 1242 int packets_handled = 0; 1243 1244 spin_lock_irqsave(&(sc->sbm_lock), flags); 1245 1246 if (d->sbdma_remptr == d->sbdma_addptr) 1247 goto end_unlock; 1248 1249 hwidx = ((__raw_readq(d->sbdma_curdscr) & M_DMA_CURDSCR_ADDR) - 1250 d->sbdma_dscrtable_phys) / sizeof(*d->sbdma_dscrtable); 1251 1252 for (;;) { 1253 /* 1254 * figure out where we are (as an index) and where 1255 * the hardware is (also as an index) 1256 * 1257 * This could be done faster if (for example) the 1258 * descriptor table was page-aligned and contiguous in 1259 * both virtual and physical memory -- you could then 1260 * just compare the low-order bits of the virtual address 1261 * (sbdma_remptr) and the physical address (sbdma_curdscr CSR) 1262 */ 1263 1264 curidx = d->sbdma_remptr - d->sbdma_dscrtable; 1265 1266 /* 1267 * If they're the same, that means we've processed all 1268 * of the descriptors up to (but not including) the one that 1269 * the hardware is working on right now. 1270 */ 1271 1272 if (curidx == hwidx) 1273 break; 1274 1275 /* 1276 * Otherwise, get the packet's sk_buff ptr back 1277 */ 1278 1279 dsc = &(d->sbdma_dscrtable[curidx]); 1280 sb = d->sbdma_ctxtable[curidx]; 1281 d->sbdma_ctxtable[curidx] = NULL; 1282 1283 /* 1284 * Stats 1285 */ 1286 1287 dev->stats.tx_bytes += sb->len; 1288 dev->stats.tx_packets++; 1289 1290 /* 1291 * for transmits, we just free buffers. 1292 */ 1293 1294 dev_kfree_skb_irq(sb); 1295 1296 /* 1297 * .. and advance to the next buffer. 1298 */ 1299 1300 d->sbdma_remptr = SBDMA_NEXTBUF(d,sbdma_remptr); 1301 1302 packets_handled++; 1303 1304 } 1305 1306 /* 1307 * Decide if we should wake up the protocol or not. 1308 * Other drivers seem to do this when we reach a low 1309 * watermark on the transmit queue. 1310 */ 1311 1312 if (packets_handled) 1313 netif_wake_queue(d->sbdma_eth->sbm_dev); 1314 1315end_unlock: 1316 spin_unlock_irqrestore(&(sc->sbm_lock), flags); 1317 1318} 1319 1320 1321 1322/********************************************************************** 1323 * SBMAC_INITCTX(s) 1324 * 1325 * Initialize an Ethernet context structure - this is called 1326 * once per MAC on the 1250. Memory is allocated here, so don't 1327 * call it again from inside the ioctl routines that bring the 1328 * interface up/down 1329 * 1330 * Input parameters: 1331 * s - sbmac context structure 1332 * 1333 * Return value: 1334 * 0 1335 ********************************************************************* */ 1336 1337static int sbmac_initctx(struct sbmac_softc *s) 1338{ 1339 1340 /* 1341 * figure out the addresses of some ports 1342 */ 1343 1344 s->sbm_macenable = s->sbm_base + R_MAC_ENABLE; 1345 s->sbm_maccfg = s->sbm_base + R_MAC_CFG; 1346 s->sbm_fifocfg = s->sbm_base + R_MAC_THRSH_CFG; 1347 s->sbm_framecfg = s->sbm_base + R_MAC_FRAMECFG; 1348 s->sbm_rxfilter = s->sbm_base + R_MAC_ADFILTER_CFG; 1349 s->sbm_isr = s->sbm_base + R_MAC_STATUS; 1350 s->sbm_imr = s->sbm_base + R_MAC_INT_MASK; 1351 s->sbm_mdio = s->sbm_base + R_MAC_MDIO; 1352 1353 /* 1354 * Initialize the DMA channels. Right now, only one per MAC is used 1355 * Note: Only do this _once_, as it allocates memory from the kernel! 1356 */ 1357 1358 sbdma_initctx(&(s->sbm_txdma),s,0,DMA_TX,SBMAC_MAX_TXDESCR); 1359 sbdma_initctx(&(s->sbm_rxdma),s,0,DMA_RX,SBMAC_MAX_RXDESCR); 1360 1361 /* 1362 * initial state is OFF 1363 */ 1364 1365 s->sbm_state = sbmac_state_off; 1366 1367 return 0; 1368} 1369 1370 1371static void sbdma_uninitctx(struct sbmacdma *d) 1372{ 1373 if (d->sbdma_dscrtable_unaligned) { 1374 kfree(d->sbdma_dscrtable_unaligned); 1375 d->sbdma_dscrtable_unaligned = d->sbdma_dscrtable = NULL; 1376 } 1377 1378 if (d->sbdma_ctxtable) { 1379 kfree(d->sbdma_ctxtable); 1380 d->sbdma_ctxtable = NULL; 1381 } 1382} 1383 1384 1385static void sbmac_uninitctx(struct sbmac_softc *sc) 1386{ 1387 sbdma_uninitctx(&(sc->sbm_txdma)); 1388 sbdma_uninitctx(&(sc->sbm_rxdma)); 1389} 1390 1391 1392/********************************************************************** 1393 * SBMAC_CHANNEL_START(s) 1394 * 1395 * Start packet processing on this MAC. 1396 * 1397 * Input parameters: 1398 * s - sbmac structure 1399 * 1400 * Return value: 1401 * nothing 1402 ********************************************************************* */ 1403 1404static void sbmac_channel_start(struct sbmac_softc *s) 1405{ 1406 uint64_t reg; 1407 void __iomem *port; 1408 uint64_t cfg,fifo,framecfg; 1409 int idx, th_value; 1410 1411 /* 1412 * Don't do this if running 1413 */ 1414 1415 if (s->sbm_state == sbmac_state_on) 1416 return; 1417 1418 /* 1419 * Bring the controller out of reset, but leave it off. 1420 */ 1421 1422 __raw_writeq(0, s->sbm_macenable); 1423 1424 /* 1425 * Ignore all received packets 1426 */ 1427 1428 __raw_writeq(0, s->sbm_rxfilter); 1429 1430 /* 1431 * Calculate values for various control registers. 1432 */ 1433 1434 cfg = M_MAC_RETRY_EN | 1435 M_MAC_TX_HOLD_SOP_EN | 1436 V_MAC_TX_PAUSE_CNT_16K | 1437 M_MAC_AP_STAT_EN | 1438 M_MAC_FAST_SYNC | 1439 M_MAC_SS_EN | 1440 0; 1441 1442 /* 1443 * Be sure that RD_THRSH+WR_THRSH <= 32 for pass1 pars 1444 * and make sure that RD_THRSH + WR_THRSH <=128 for pass2 and above 1445 * Use a larger RD_THRSH for gigabit 1446 */ 1447 if (soc_type == K_SYS_SOC_TYPE_BCM1250 && periph_rev < 2) 1448 th_value = 28; 1449 else 1450 th_value = 64; 1451 1452 fifo = V_MAC_TX_WR_THRSH(4) | /* Must be '4' or '8' */ 1453 ((s->sbm_speed == sbmac_speed_1000) 1454 ? V_MAC_TX_RD_THRSH(th_value) : V_MAC_TX_RD_THRSH(4)) | 1455 V_MAC_TX_RL_THRSH(4) | 1456 V_MAC_RX_PL_THRSH(4) | 1457 V_MAC_RX_RD_THRSH(4) | /* Must be '4' */ 1458 V_MAC_RX_RL_THRSH(8) | 1459 0; 1460 1461 framecfg = V_MAC_MIN_FRAMESZ_DEFAULT | 1462 V_MAC_MAX_FRAMESZ_DEFAULT | 1463 V_MAC_BACKOFF_SEL(1); 1464 1465 /* 1466 * Clear out the hash address map 1467 */ 1468 1469 port = s->sbm_base + R_MAC_HASH_BASE; 1470 for (idx = 0; idx < MAC_HASH_COUNT; idx++) { 1471 __raw_writeq(0, port); 1472 port += sizeof(uint64_t); 1473 } 1474 1475 /* 1476 * Clear out the exact-match table 1477 */ 1478 1479 port = s->sbm_base + R_MAC_ADDR_BASE; 1480 for (idx = 0; idx < MAC_ADDR_COUNT; idx++) { 1481 __raw_writeq(0, port); 1482 port += sizeof(uint64_t); 1483 } 1484 1485 /* 1486 * Clear out the DMA Channel mapping table registers 1487 */ 1488 1489 port = s->sbm_base + R_MAC_CHUP0_BASE; 1490 for (idx = 0; idx < MAC_CHMAP_COUNT; idx++) { 1491 __raw_writeq(0, port); 1492 port += sizeof(uint64_t); 1493 } 1494 1495 1496 port = s->sbm_base + R_MAC_CHLO0_BASE; 1497 for (idx = 0; idx < MAC_CHMAP_COUNT; idx++) { 1498 __raw_writeq(0, port); 1499 port += sizeof(uint64_t); 1500 } 1501 1502 /* 1503 * Program the hardware address. It goes into the hardware-address 1504 * register as well as the first filter register. 1505 */ 1506 1507 reg = sbmac_addr2reg(s->sbm_hwaddr); 1508 1509 port = s->sbm_base + R_MAC_ADDR_BASE; 1510 __raw_writeq(reg, port); 1511 port = s->sbm_base + R_MAC_ETHERNET_ADDR; 1512 1513#ifdef CONFIG_SB1_PASS_1_WORKAROUNDS 1514 /* 1515 * Pass1 SOCs do not receive packets addressed to the 1516 * destination address in the R_MAC_ETHERNET_ADDR register. 1517 * Set the value to zero. 1518 */ 1519 __raw_writeq(0, port); 1520#else 1521 __raw_writeq(reg, port); 1522#endif 1523 1524 /* 1525 * Set the receive filter for no packets, and write values 1526 * to the various config registers 1527 */ 1528 1529 __raw_writeq(0, s->sbm_rxfilter); 1530 __raw_writeq(0, s->sbm_imr); 1531 __raw_writeq(framecfg, s->sbm_framecfg); 1532 __raw_writeq(fifo, s->sbm_fifocfg); 1533 __raw_writeq(cfg, s->sbm_maccfg); 1534 1535 /* 1536 * Initialize DMA channels (rings should be ok now) 1537 */ 1538 1539 sbdma_channel_start(&(s->sbm_rxdma), DMA_RX); 1540 sbdma_channel_start(&(s->sbm_txdma), DMA_TX); 1541 1542 /* 1543 * Configure the speed, duplex, and flow control 1544 */ 1545 1546 sbmac_set_speed(s,s->sbm_speed); 1547 sbmac_set_duplex(s,s->sbm_duplex,s->sbm_fc); 1548 1549 /* 1550 * Fill the receive ring 1551 */ 1552 1553 sbdma_fillring(s, &(s->sbm_rxdma)); 1554 1555 /* 1556 * Turn on the rest of the bits in the enable register 1557 */ 1558 1559#if defined(CONFIG_SIBYTE_BCM1x55) || defined(CONFIG_SIBYTE_BCM1x80) 1560 __raw_writeq(M_MAC_RXDMA_EN0 | 1561 M_MAC_TXDMA_EN0, s->sbm_macenable); 1562#elif defined(CONFIG_SIBYTE_SB1250) || defined(CONFIG_SIBYTE_BCM112X) 1563 __raw_writeq(M_MAC_RXDMA_EN0 | 1564 M_MAC_TXDMA_EN0 | 1565 M_MAC_RX_ENABLE | 1566 M_MAC_TX_ENABLE, s->sbm_macenable); 1567#else 1568#error invalid SiByte MAC configuration 1569#endif 1570 1571#ifdef CONFIG_SBMAC_COALESCE 1572 __raw_writeq(((M_MAC_INT_EOP_COUNT | M_MAC_INT_EOP_TIMER) << S_MAC_TX_CH0) | 1573 ((M_MAC_INT_EOP_COUNT | M_MAC_INT_EOP_TIMER) << S_MAC_RX_CH0), s->sbm_imr); 1574#else 1575 __raw_writeq((M_MAC_INT_CHANNEL << S_MAC_TX_CH0) | 1576 (M_MAC_INT_CHANNEL << S_MAC_RX_CH0), s->sbm_imr); 1577#endif 1578 1579 /* 1580 * Enable receiving unicasts and broadcasts 1581 */ 1582 1583 __raw_writeq(M_MAC_UCAST_EN | M_MAC_BCAST_EN, s->sbm_rxfilter); 1584 1585 /* 1586 * we're running now. 1587 */ 1588 1589 s->sbm_state = sbmac_state_on; 1590 1591 /* 1592 * Program multicast addresses 1593 */ 1594 1595 sbmac_setmulti(s); 1596 1597 /* 1598 * If channel was in promiscuous mode before, turn that on 1599 */ 1600 1601 if (s->sbm_devflags & IFF_PROMISC) { 1602 sbmac_promiscuous_mode(s,1); 1603 } 1604 1605} 1606 1607 1608/********************************************************************** 1609 * SBMAC_CHANNEL_STOP(s) 1610 * 1611 * Stop packet processing on this MAC. 1612 * 1613 * Input parameters: 1614 * s - sbmac structure 1615 * 1616 * Return value: 1617 * nothing 1618 ********************************************************************* */ 1619 1620static void sbmac_channel_stop(struct sbmac_softc *s) 1621{ 1622 /* don't do this if already stopped */ 1623 1624 if (s->sbm_state == sbmac_state_off) 1625 return; 1626 1627 /* don't accept any packets, disable all interrupts */ 1628 1629 __raw_writeq(0, s->sbm_rxfilter); 1630 __raw_writeq(0, s->sbm_imr); 1631 1632 /* Turn off ticker */ 1633 1634 /* XXX */ 1635 1636 /* turn off receiver and transmitter */ 1637 1638 __raw_writeq(0, s->sbm_macenable); 1639 1640 /* We're stopped now. */ 1641 1642 s->sbm_state = sbmac_state_off; 1643 1644 /* 1645 * Stop DMA channels (rings should be ok now) 1646 */ 1647 1648 sbdma_channel_stop(&(s->sbm_rxdma)); 1649 sbdma_channel_stop(&(s->sbm_txdma)); 1650 1651 /* Empty the receive and transmit rings */ 1652 1653 sbdma_emptyring(&(s->sbm_rxdma)); 1654 sbdma_emptyring(&(s->sbm_txdma)); 1655 1656} 1657 1658/********************************************************************** 1659 * SBMAC_SET_CHANNEL_STATE(state) 1660 * 1661 * Set the channel's state ON or OFF 1662 * 1663 * Input parameters: 1664 * state - new state 1665 * 1666 * Return value: 1667 * old state 1668 ********************************************************************* */ 1669static enum sbmac_state sbmac_set_channel_state(struct sbmac_softc *sc, 1670 enum sbmac_state state) 1671{ 1672 enum sbmac_state oldstate = sc->sbm_state; 1673 1674 /* 1675 * If same as previous state, return 1676 */ 1677 1678 if (state == oldstate) { 1679 return oldstate; 1680 } 1681 1682 /* 1683 * If new state is ON, turn channel on 1684 */ 1685 1686 if (state == sbmac_state_on) { 1687 sbmac_channel_start(sc); 1688 } 1689 else { 1690 sbmac_channel_stop(sc); 1691 } 1692 1693 /* 1694 * Return previous state 1695 */ 1696 1697 return oldstate; 1698} 1699 1700 1701/********************************************************************** 1702 * SBMAC_PROMISCUOUS_MODE(sc,onoff) 1703 * 1704 * Turn on or off promiscuous mode 1705 * 1706 * Input parameters: 1707 * sc - softc 1708 * onoff - 1 to turn on, 0 to turn off 1709 * 1710 * Return value: 1711 * nothing 1712 ********************************************************************* */ 1713 1714static void sbmac_promiscuous_mode(struct sbmac_softc *sc,int onoff) 1715{ 1716 uint64_t reg; 1717 1718 if (sc->sbm_state != sbmac_state_on) 1719 return; 1720 1721 if (onoff) { 1722 reg = __raw_readq(sc->sbm_rxfilter); 1723 reg |= M_MAC_ALLPKT_EN; 1724 __raw_writeq(reg, sc->sbm_rxfilter); 1725 } 1726 else { 1727 reg = __raw_readq(sc->sbm_rxfilter); 1728 reg &= ~M_MAC_ALLPKT_EN; 1729 __raw_writeq(reg, sc->sbm_rxfilter); 1730 } 1731} 1732 1733/********************************************************************** 1734 * SBMAC_SETIPHDR_OFFSET(sc,onoff) 1735 * 1736 * Set the iphdr offset as 15 assuming ethernet encapsulation 1737 * 1738 * Input parameters: 1739 * sc - softc 1740 * 1741 * Return value: 1742 * nothing 1743 ********************************************************************* */ 1744 1745static void sbmac_set_iphdr_offset(struct sbmac_softc *sc) 1746{ 1747 uint64_t reg; 1748 1749 /* Hard code the off set to 15 for now */ 1750 reg = __raw_readq(sc->sbm_rxfilter); 1751 reg &= ~M_MAC_IPHDR_OFFSET | V_MAC_IPHDR_OFFSET(15); 1752 __raw_writeq(reg, sc->sbm_rxfilter); 1753 1754 /* BCM1250 pass1 didn't have hardware checksum. Everything 1755 later does. */ 1756 if (soc_type == K_SYS_SOC_TYPE_BCM1250 && periph_rev < 2) { 1757 sc->rx_hw_checksum = DISABLE; 1758 } else { 1759 sc->rx_hw_checksum = ENABLE; 1760 } 1761} 1762 1763 1764/********************************************************************** 1765 * SBMAC_ADDR2REG(ptr) 1766 * 1767 * Convert six bytes into the 64-bit register value that 1768 * we typically write into the SBMAC's address/mcast registers 1769 * 1770 * Input parameters: 1771 * ptr - pointer to 6 bytes 1772 * 1773 * Return value: 1774 * register value 1775 ********************************************************************* */ 1776 1777static uint64_t sbmac_addr2reg(unsigned char *ptr) 1778{ 1779 uint64_t reg = 0; 1780 1781 ptr += 6; 1782 1783 reg |= (uint64_t) *(--ptr); 1784 reg <<= 8; 1785 reg |= (uint64_t) *(--ptr); 1786 reg <<= 8; 1787 reg |= (uint64_t) *(--ptr); 1788 reg <<= 8; 1789 reg |= (uint64_t) *(--ptr); 1790 reg <<= 8; 1791 reg |= (uint64_t) *(--ptr); 1792 reg <<= 8; 1793 reg |= (uint64_t) *(--ptr); 1794 1795 return reg; 1796} 1797 1798 1799/********************************************************************** 1800 * SBMAC_SET_SPEED(s,speed) 1801 * 1802 * Configure LAN speed for the specified MAC. 1803 * Warning: must be called when MAC is off! 1804 * 1805 * Input parameters: 1806 * s - sbmac structure 1807 * speed - speed to set MAC to (see enum sbmac_speed) 1808 * 1809 * Return value: 1810 * 1 if successful 1811 * 0 indicates invalid parameters 1812 ********************************************************************* */ 1813 1814static int sbmac_set_speed(struct sbmac_softc *s, enum sbmac_speed speed) 1815{ 1816 uint64_t cfg; 1817 uint64_t framecfg; 1818 1819 /* 1820 * Save new current values 1821 */ 1822 1823 s->sbm_speed = speed; 1824 1825 if (s->sbm_state == sbmac_state_on) 1826 return 0; /* save for next restart */ 1827 1828 /* 1829 * Read current register values 1830 */ 1831 1832 cfg = __raw_readq(s->sbm_maccfg); 1833 framecfg = __raw_readq(s->sbm_framecfg); 1834 1835 /* 1836 * Mask out the stuff we want to change 1837 */ 1838 1839 cfg &= ~(M_MAC_BURST_EN | M_MAC_SPEED_SEL); 1840 framecfg &= ~(M_MAC_IFG_RX | M_MAC_IFG_TX | M_MAC_IFG_THRSH | 1841 M_MAC_SLOT_SIZE); 1842 1843 /* 1844 * Now add in the new bits 1845 */ 1846 1847 switch (speed) { 1848 case sbmac_speed_10: 1849 framecfg |= V_MAC_IFG_RX_10 | 1850 V_MAC_IFG_TX_10 | 1851 K_MAC_IFG_THRSH_10 | 1852 V_MAC_SLOT_SIZE_10; 1853 cfg |= V_MAC_SPEED_SEL_10MBPS; 1854 break; 1855 1856 case sbmac_speed_100: 1857 framecfg |= V_MAC_IFG_RX_100 | 1858 V_MAC_IFG_TX_100 | 1859 V_MAC_IFG_THRSH_100 | 1860 V_MAC_SLOT_SIZE_100; 1861 cfg |= V_MAC_SPEED_SEL_100MBPS ; 1862 break; 1863 1864 case sbmac_speed_1000: 1865 framecfg |= V_MAC_IFG_RX_1000 | 1866 V_MAC_IFG_TX_1000 | 1867 V_MAC_IFG_THRSH_1000 | 1868 V_MAC_SLOT_SIZE_1000; 1869 cfg |= V_MAC_SPEED_SEL_1000MBPS | M_MAC_BURST_EN; 1870 break; 1871 1872 default: 1873 return 0; 1874 } 1875 1876 /* 1877 * Send the bits back to the hardware 1878 */ 1879 1880 __raw_writeq(framecfg, s->sbm_framecfg); 1881 __raw_writeq(cfg, s->sbm_maccfg); 1882 1883 return 1; 1884} 1885 1886/********************************************************************** 1887 * SBMAC_SET_DUPLEX(s,duplex,fc) 1888 * 1889 * Set Ethernet duplex and flow control options for this MAC 1890 * Warning: must be called when MAC is off! 1891 * 1892 * Input parameters: 1893 * s - sbmac structure 1894 * duplex - duplex setting (see enum sbmac_duplex) 1895 * fc - flow control setting (see enum sbmac_fc) 1896 * 1897 * Return value: 1898 * 1 if ok 1899 * 0 if an invalid parameter combination was specified 1900 ********************************************************************* */ 1901 1902static int sbmac_set_duplex(struct sbmac_softc *s, enum sbmac_duplex duplex, 1903 enum sbmac_fc fc) 1904{ 1905 uint64_t cfg; 1906 1907 /* 1908 * Save new current values 1909 */ 1910 1911 s->sbm_duplex = duplex; 1912 s->sbm_fc = fc; 1913 1914 if (s->sbm_state == sbmac_state_on) 1915 return 0; /* save for next restart */ 1916 1917 /* 1918 * Read current register values 1919 */ 1920 1921 cfg = __raw_readq(s->sbm_maccfg); 1922 1923 /* 1924 * Mask off the stuff we're about to change 1925 */ 1926 1927 cfg &= ~(M_MAC_FC_SEL | M_MAC_FC_CMD | M_MAC_HDX_EN); 1928 1929 1930 switch (duplex) { 1931 case sbmac_duplex_half: 1932 switch (fc) { 1933 case sbmac_fc_disabled: 1934 cfg |= M_MAC_HDX_EN | V_MAC_FC_CMD_DISABLED; 1935 break; 1936 1937 case sbmac_fc_collision: 1938 cfg |= M_MAC_HDX_EN | V_MAC_FC_CMD_ENABLED; 1939 break; 1940 1941 case sbmac_fc_carrier: 1942 cfg |= M_MAC_HDX_EN | V_MAC_FC_CMD_ENAB_FALSECARR; 1943 break; 1944 1945 case sbmac_fc_frame: /* not valid in half duplex */ 1946 default: /* invalid selection */ 1947 return 0; 1948 } 1949 break; 1950 1951 case sbmac_duplex_full: 1952 switch (fc) { 1953 case sbmac_fc_disabled: 1954 cfg |= V_MAC_FC_CMD_DISABLED; 1955 break; 1956 1957 case sbmac_fc_frame: 1958 cfg |= V_MAC_FC_CMD_ENABLED; 1959 break; 1960 1961 case sbmac_fc_collision: /* not valid in full duplex */ 1962 case sbmac_fc_carrier: /* not valid in full duplex */ 1963 default: 1964 return 0; 1965 } 1966 break; 1967 default: 1968 return 0; 1969 } 1970 1971 /* 1972 * Send the bits back to the hardware 1973 */ 1974 1975 __raw_writeq(cfg, s->sbm_maccfg); 1976 1977 return 1; 1978} 1979 1980 1981 1982 1983/********************************************************************** 1984 * SBMAC_INTR() 1985 * 1986 * Interrupt handler for MAC interrupts 1987 * 1988 * Input parameters: 1989 * MAC structure 1990 * 1991 * Return value: 1992 * nothing 1993 ********************************************************************* */ 1994static irqreturn_t sbmac_intr(int irq,void *dev_instance) 1995{ 1996 struct net_device *dev = (struct net_device *) dev_instance; 1997 struct sbmac_softc *sc = netdev_priv(dev); 1998 uint64_t isr; 1999 int handled = 0; 2000 2001 /* 2002 * Read the ISR (this clears the bits in the real 2003 * register, except for counter addr) 2004 */ 2005 2006 isr = __raw_readq(sc->sbm_isr) & ~M_MAC_COUNTER_ADDR; 2007 2008 if (isr == 0) 2009 return IRQ_RETVAL(0); 2010 handled = 1; 2011 2012 /* 2013 * Transmits on channel 0 2014 */ 2015 2016 if (isr & (M_MAC_INT_CHANNEL << S_MAC_TX_CH0)) 2017 sbdma_tx_process(sc,&(sc->sbm_txdma), 0); 2018 2019 if (isr & (M_MAC_INT_CHANNEL << S_MAC_RX_CH0)) { 2020 if (napi_schedule_prep(&sc->napi)) { 2021 __raw_writeq(0, sc->sbm_imr); 2022 __napi_schedule(&sc->napi); 2023 /* Depend on the exit from poll to reenable intr */ 2024 } 2025 else { 2026 /* may leave some packets behind */ 2027 sbdma_rx_process(sc,&(sc->sbm_rxdma), 2028 SBMAC_MAX_RXDESCR * 2, 0); 2029 } 2030 } 2031 return IRQ_RETVAL(handled); 2032} 2033 2034/********************************************************************** 2035 * SBMAC_START_TX(skb,dev) 2036 * 2037 * Start output on the specified interface. Basically, we 2038 * queue as many buffers as we can until the ring fills up, or 2039 * we run off the end of the queue, whichever comes first. 2040 * 2041 * Input parameters: 2042 * 2043 * 2044 * Return value: 2045 * nothing 2046 ********************************************************************* */ 2047static int sbmac_start_tx(struct sk_buff *skb, struct net_device *dev) 2048{ 2049 struct sbmac_softc *sc = netdev_priv(dev); 2050 unsigned long flags; 2051 2052 /* lock eth irq */ 2053 spin_lock_irqsave(&sc->sbm_lock, flags); 2054 2055 /* 2056 * Put the buffer on the transmit ring. If we 2057 * don't have room, stop the queue. 2058 */ 2059 2060 if (sbdma_add_txbuffer(&(sc->sbm_txdma),skb)) { 2061 /* XXX save skb that we could not send */ 2062 netif_stop_queue(dev); 2063 spin_unlock_irqrestore(&sc->sbm_lock, flags); 2064 2065 return NETDEV_TX_BUSY; 2066 } 2067 2068 spin_unlock_irqrestore(&sc->sbm_lock, flags); 2069 2070 return NETDEV_TX_OK; 2071} 2072 2073/********************************************************************** 2074 * SBMAC_SETMULTI(sc) 2075 * 2076 * Reprogram the multicast table into the hardware, given 2077 * the list of multicasts associated with the interface 2078 * structure. 2079 * 2080 * Input parameters: 2081 * sc - softc 2082 * 2083 * Return value: 2084 * nothing 2085 ********************************************************************* */ 2086 2087static void sbmac_setmulti(struct sbmac_softc *sc) 2088{ 2089 uint64_t reg; 2090 void __iomem *port; 2091 int idx; 2092 struct netdev_hw_addr *ha; 2093 struct net_device *dev = sc->sbm_dev; 2094 2095 /* 2096 * Clear out entire multicast table. We do this by nuking 2097 * the entire hash table and all the direct matches except 2098 * the first one, which is used for our station address 2099 */ 2100 2101 for (idx = 1; idx < MAC_ADDR_COUNT; idx++) { 2102 port = sc->sbm_base + R_MAC_ADDR_BASE+(idx*sizeof(uint64_t)); 2103 __raw_writeq(0, port); 2104 } 2105 2106 for (idx = 0; idx < MAC_HASH_COUNT; idx++) { 2107 port = sc->sbm_base + R_MAC_HASH_BASE+(idx*sizeof(uint64_t)); 2108 __raw_writeq(0, port); 2109 } 2110 2111 /* 2112 * Clear the filter to say we don't want any multicasts. 2113 */ 2114 2115 reg = __raw_readq(sc->sbm_rxfilter); 2116 reg &= ~(M_MAC_MCAST_INV | M_MAC_MCAST_EN); 2117 __raw_writeq(reg, sc->sbm_rxfilter); 2118 2119 if (dev->flags & IFF_ALLMULTI) { 2120 /* 2121 * Enable ALL multicasts. Do this by inverting the 2122 * multicast enable bit. 2123 */ 2124 reg = __raw_readq(sc->sbm_rxfilter); 2125 reg |= (M_MAC_MCAST_INV | M_MAC_MCAST_EN); 2126 __raw_writeq(reg, sc->sbm_rxfilter); 2127 return; 2128 } 2129 2130 2131 /* 2132 * Progam new multicast entries. For now, only use the 2133 * perfect filter. In the future we'll need to use the 2134 * hash filter if the perfect filter overflows 2135 */ 2136 2137 /* XXX only using perfect filter for now, need to use hash 2138 * XXX if the table overflows */ 2139 2140 idx = 1; /* skip station address */ 2141 netdev_for_each_mc_addr(ha, dev) { 2142 if (idx == MAC_ADDR_COUNT) 2143 break; 2144 reg = sbmac_addr2reg(ha->addr); 2145 port = sc->sbm_base + R_MAC_ADDR_BASE+(idx * sizeof(uint64_t)); 2146 __raw_writeq(reg, port); 2147 idx++; 2148 } 2149 2150 /* 2151 * Enable the "accept multicast bits" if we programmed at least one 2152 * multicast. 2153 */ 2154 2155 if (idx > 1) { 2156 reg = __raw_readq(sc->sbm_rxfilter); 2157 reg |= M_MAC_MCAST_EN; 2158 __raw_writeq(reg, sc->sbm_rxfilter); 2159 } 2160} 2161 2162static int sb1250_change_mtu(struct net_device *_dev, int new_mtu) 2163{ 2164 if (new_mtu > ENET_PACKET_SIZE) 2165 return -EINVAL; 2166 _dev->mtu = new_mtu; 2167 pr_info("changing the mtu to %d\n", new_mtu); 2168 return 0; 2169} 2170 2171static const struct net_device_ops sbmac_netdev_ops = { 2172 .ndo_open = sbmac_open, 2173 .ndo_stop = sbmac_close, 2174 .ndo_start_xmit = sbmac_start_tx, 2175 .ndo_set_rx_mode = sbmac_set_rx_mode, 2176 .ndo_tx_timeout = sbmac_tx_timeout, 2177 .ndo_do_ioctl = sbmac_mii_ioctl, 2178 .ndo_change_mtu = sb1250_change_mtu, 2179 .ndo_validate_addr = eth_validate_addr, 2180 .ndo_set_mac_address = eth_mac_addr, 2181#ifdef CONFIG_NET_POLL_CONTROLLER 2182 .ndo_poll_controller = sbmac_netpoll, 2183#endif 2184}; 2185 2186/********************************************************************** 2187 * SBMAC_INIT(dev) 2188 * 2189 * Attach routine - init hardware and hook ourselves into linux 2190 * 2191 * Input parameters: 2192 * dev - net_device structure 2193 * 2194 * Return value: 2195 * status 2196 ********************************************************************* */ 2197 2198static int sbmac_init(struct platform_device *pldev, long long base) 2199{ 2200 struct net_device *dev = dev_get_drvdata(&pldev->dev); 2201 int idx = pldev->id; 2202 struct sbmac_softc *sc = netdev_priv(dev); 2203 unsigned char *eaddr; 2204 uint64_t ea_reg; 2205 int i; 2206 int err; 2207 2208 sc->sbm_dev = dev; 2209 sc->sbe_idx = idx; 2210 2211 eaddr = sc->sbm_hwaddr; 2212 2213 /* 2214 * Read the ethernet address. The firmware left this programmed 2215 * for us in the ethernet address register for each mac. 2216 */ 2217 2218 ea_reg = __raw_readq(sc->sbm_base + R_MAC_ETHERNET_ADDR); 2219 __raw_writeq(0, sc->sbm_base + R_MAC_ETHERNET_ADDR); 2220 for (i = 0; i < 6; i++) { 2221 eaddr[i] = (uint8_t) (ea_reg & 0xFF); 2222 ea_reg >>= 8; 2223 } 2224 2225 for (i = 0; i < 6; i++) { 2226 dev->dev_addr[i] = eaddr[i]; 2227 } 2228 2229 /* 2230 * Initialize context (get pointers to registers and stuff), then 2231 * allocate the memory for the descriptor tables. 2232 */ 2233 2234 sbmac_initctx(sc); 2235 2236 /* 2237 * Set up Linux device callins 2238 */ 2239 2240 spin_lock_init(&(sc->sbm_lock)); 2241 2242 dev->netdev_ops = &sbmac_netdev_ops; 2243 dev->watchdog_timeo = TX_TIMEOUT; 2244 2245 netif_napi_add(dev, &sc->napi, sbmac_poll, 16); 2246 2247 dev->irq = UNIT_INT(idx); 2248 2249 /* This is needed for PASS2 for Rx H/W checksum feature */ 2250 sbmac_set_iphdr_offset(sc); 2251 2252 sc->mii_bus = mdiobus_alloc(); 2253 if (sc->mii_bus == NULL) { 2254 err = -ENOMEM; 2255 goto uninit_ctx; 2256 } 2257 2258 sc->mii_bus->name = sbmac_mdio_string; 2259 snprintf(sc->mii_bus->id, MII_BUS_ID_SIZE, "%s-%x", 2260 pldev->name, idx); 2261 sc->mii_bus->priv = sc; 2262 sc->mii_bus->read = sbmac_mii_read; 2263 sc->mii_bus->write = sbmac_mii_write; 2264 sc->mii_bus->irq = sc->phy_irq; 2265 for (i = 0; i < PHY_MAX_ADDR; ++i) 2266 sc->mii_bus->irq[i] = SBMAC_PHY_INT; 2267 2268 sc->mii_bus->parent = &pldev->dev; 2269 /* 2270 * Probe PHY address 2271 */ 2272 err = mdiobus_register(sc->mii_bus); 2273 if (err) { 2274 printk(KERN_ERR "%s: unable to register MDIO bus\n", 2275 dev->name); 2276 goto free_mdio; 2277 } 2278 dev_set_drvdata(&pldev->dev, sc->mii_bus); 2279 2280 err = register_netdev(dev); 2281 if (err) { 2282 printk(KERN_ERR "%s.%d: unable to register netdev\n", 2283 sbmac_string, idx); 2284 goto unreg_mdio; 2285 } 2286 2287 pr_info("%s.%d: registered as %s\n", sbmac_string, idx, dev->name); 2288 2289 if (sc->rx_hw_checksum == ENABLE) 2290 pr_info("%s: enabling TCP rcv checksum\n", dev->name); 2291 2292 /* 2293 * Display Ethernet address (this is called during the config 2294 * process so we need to finish off the config message that 2295 * was being displayed) 2296 */ 2297 pr_info("%s: SiByte Ethernet at 0x%08Lx, address: %pM\n", 2298 dev->name, base, eaddr); 2299 2300 return 0; 2301unreg_mdio: 2302 mdiobus_unregister(sc->mii_bus); 2303 dev_set_drvdata(&pldev->dev, NULL); 2304free_mdio: 2305 mdiobus_free(sc->mii_bus); 2306uninit_ctx: 2307 sbmac_uninitctx(sc); 2308 return err; 2309} 2310 2311 2312static int sbmac_open(struct net_device *dev) 2313{ 2314 struct sbmac_softc *sc = netdev_priv(dev); 2315 int err; 2316 2317 if (debug > 1) 2318 pr_debug("%s: sbmac_open() irq %d.\n", dev->name, dev->irq); 2319 2320 /* 2321 * map/route interrupt (clear status first, in case something 2322 * weird is pending; we haven't initialized the mac registers 2323 * yet) 2324 */ 2325 2326 __raw_readq(sc->sbm_isr); 2327 err = request_irq(dev->irq, sbmac_intr, IRQF_SHARED, dev->name, dev); 2328 if (err) { 2329 printk(KERN_ERR "%s: unable to get IRQ %d\n", dev->name, 2330 dev->irq); 2331 goto out_err; 2332 } 2333 2334 sc->sbm_speed = sbmac_speed_none; 2335 sc->sbm_duplex = sbmac_duplex_none; 2336 sc->sbm_fc = sbmac_fc_none; 2337 sc->sbm_pause = -1; 2338 sc->sbm_link = 0; 2339 2340 /* 2341 * Attach to the PHY 2342 */ 2343 err = sbmac_mii_probe(dev); 2344 if (err) 2345 goto out_unregister; 2346 2347 /* 2348 * Turn on the channel 2349 */ 2350 2351 sbmac_set_channel_state(sc,sbmac_state_on); 2352 2353 netif_start_queue(dev); 2354 2355 sbmac_set_rx_mode(dev); 2356 2357 phy_start(sc->phy_dev); 2358 2359 napi_enable(&sc->napi); 2360 2361 return 0; 2362 2363out_unregister: 2364 free_irq(dev->irq, dev); 2365out_err: 2366 return err; 2367} 2368 2369static int sbmac_mii_probe(struct net_device *dev) 2370{ 2371 struct sbmac_softc *sc = netdev_priv(dev); 2372 struct phy_device *phy_dev; 2373 int i; 2374 2375 for (i = 0; i < PHY_MAX_ADDR; i++) { 2376 phy_dev = sc->mii_bus->phy_map[i]; 2377 if (phy_dev) 2378 break; 2379 } 2380 if (!phy_dev) { 2381 printk(KERN_ERR "%s: no PHY found\n", dev->name); 2382 return -ENXIO; 2383 } 2384 2385 phy_dev = phy_connect(dev, dev_name(&phy_dev->dev), &sbmac_mii_poll, 2386 PHY_INTERFACE_MODE_GMII); 2387 if (IS_ERR(phy_dev)) { 2388 printk(KERN_ERR "%s: could not attach to PHY\n", dev->name); 2389 return PTR_ERR(phy_dev); 2390 } 2391 2392 /* Remove any features not supported by the controller */ 2393 phy_dev->supported &= SUPPORTED_10baseT_Half | 2394 SUPPORTED_10baseT_Full | 2395 SUPPORTED_100baseT_Half | 2396 SUPPORTED_100baseT_Full | 2397 SUPPORTED_1000baseT_Half | 2398 SUPPORTED_1000baseT_Full | 2399 SUPPORTED_Autoneg | 2400 SUPPORTED_MII | 2401 SUPPORTED_Pause | 2402 SUPPORTED_Asym_Pause; 2403 phy_dev->advertising = phy_dev->supported; 2404 2405 pr_info("%s: attached PHY driver [%s] (mii_bus:phy_addr=%s, irq=%d)\n", 2406 dev->name, phy_dev->drv->name, 2407 dev_name(&phy_dev->dev), phy_dev->irq); 2408 2409 sc->phy_dev = phy_dev; 2410 2411 return 0; 2412} 2413 2414 2415static void sbmac_mii_poll(struct net_device *dev) 2416{ 2417 struct sbmac_softc *sc = netdev_priv(dev); 2418 struct phy_device *phy_dev = sc->phy_dev; 2419 unsigned long flags; 2420 enum sbmac_fc fc; 2421 int link_chg, speed_chg, duplex_chg, pause_chg, fc_chg; 2422 2423 link_chg = (sc->sbm_link != phy_dev->link); 2424 speed_chg = (sc->sbm_speed != phy_dev->speed); 2425 duplex_chg = (sc->sbm_duplex != phy_dev->duplex); 2426 pause_chg = (sc->sbm_pause != phy_dev->pause); 2427 2428 if (!link_chg && !speed_chg && !duplex_chg && !pause_chg) 2429 return; /* Hmmm... */ 2430 2431 if (!phy_dev->link) { 2432 if (link_chg) { 2433 sc->sbm_link = phy_dev->link; 2434 sc->sbm_speed = sbmac_speed_none; 2435 sc->sbm_duplex = sbmac_duplex_none; 2436 sc->sbm_fc = sbmac_fc_disabled; 2437 sc->sbm_pause = -1; 2438 pr_info("%s: link unavailable\n", dev->name); 2439 } 2440 return; 2441 } 2442 2443 if (phy_dev->duplex == DUPLEX_FULL) { 2444 if (phy_dev->pause) 2445 fc = sbmac_fc_frame; 2446 else 2447 fc = sbmac_fc_disabled; 2448 } else 2449 fc = sbmac_fc_collision; 2450 fc_chg = (sc->sbm_fc != fc); 2451 2452 pr_info("%s: link available: %dbase-%cD\n", dev->name, phy_dev->speed, 2453 phy_dev->duplex == DUPLEX_FULL ? 'F' : 'H'); 2454 2455 spin_lock_irqsave(&sc->sbm_lock, flags); 2456 2457 sc->sbm_speed = phy_dev->speed; 2458 sc->sbm_duplex = phy_dev->duplex; 2459 sc->sbm_fc = fc; 2460 sc->sbm_pause = phy_dev->pause; 2461 sc->sbm_link = phy_dev->link; 2462 2463 if ((speed_chg || duplex_chg || fc_chg) && 2464 sc->sbm_state != sbmac_state_off) { 2465 /* 2466 * something changed, restart the channel 2467 */ 2468 if (debug > 1) 2469 pr_debug("%s: restarting channel " 2470 "because PHY state changed\n", dev->name); 2471 sbmac_channel_stop(sc); 2472 sbmac_channel_start(sc); 2473 } 2474 2475 spin_unlock_irqrestore(&sc->sbm_lock, flags); 2476} 2477 2478 2479static void sbmac_tx_timeout (struct net_device *dev) 2480{ 2481 struct sbmac_softc *sc = netdev_priv(dev); 2482 unsigned long flags; 2483 2484 spin_lock_irqsave(&sc->sbm_lock, flags); 2485 2486 2487 dev->trans_start = jiffies; /* prevent tx timeout */ 2488 dev->stats.tx_errors++; 2489 2490 spin_unlock_irqrestore(&sc->sbm_lock, flags); 2491 2492 printk (KERN_WARNING "%s: Transmit timed out\n",dev->name); 2493} 2494 2495 2496 2497 2498static void sbmac_set_rx_mode(struct net_device *dev) 2499{ 2500 unsigned long flags; 2501 struct sbmac_softc *sc = netdev_priv(dev); 2502 2503 spin_lock_irqsave(&sc->sbm_lock, flags); 2504 if ((dev->flags ^ sc->sbm_devflags) & IFF_PROMISC) { 2505 /* 2506 * Promiscuous changed. 2507 */ 2508 2509 if (dev->flags & IFF_PROMISC) { 2510 sbmac_promiscuous_mode(sc,1); 2511 } 2512 else { 2513 sbmac_promiscuous_mode(sc,0); 2514 } 2515 } 2516 spin_unlock_irqrestore(&sc->sbm_lock, flags); 2517 2518 /* 2519 * Program the multicasts. Do this every time. 2520 */ 2521 2522 sbmac_setmulti(sc); 2523 2524} 2525 2526static int sbmac_mii_ioctl(struct net_device *dev, struct ifreq *rq, int cmd) 2527{ 2528 struct sbmac_softc *sc = netdev_priv(dev); 2529 2530 if (!netif_running(dev) || !sc->phy_dev) 2531 return -EINVAL; 2532 2533 return phy_mii_ioctl(sc->phy_dev, rq, cmd); 2534} 2535 2536static int sbmac_close(struct net_device *dev) 2537{ 2538 struct sbmac_softc *sc = netdev_priv(dev); 2539 2540 napi_disable(&sc->napi); 2541 2542 phy_stop(sc->phy_dev); 2543 2544 sbmac_set_channel_state(sc, sbmac_state_off); 2545 2546 netif_stop_queue(dev); 2547 2548 if (debug > 1) 2549 pr_debug("%s: Shutting down ethercard\n", dev->name); 2550 2551 phy_disconnect(sc->phy_dev); 2552 sc->phy_dev = NULL; 2553 free_irq(dev->irq, dev); 2554 2555 sbdma_emptyring(&(sc->sbm_txdma)); 2556 sbdma_emptyring(&(sc->sbm_rxdma)); 2557 2558 return 0; 2559} 2560 2561static int sbmac_poll(struct napi_struct *napi, int budget) 2562{ 2563 struct sbmac_softc *sc = container_of(napi, struct sbmac_softc, napi); 2564 int work_done; 2565 2566 work_done = sbdma_rx_process(sc, &(sc->sbm_rxdma), budget, 1); 2567 sbdma_tx_process(sc, &(sc->sbm_txdma), 1); 2568 2569 if (work_done < budget) { 2570 napi_complete(napi); 2571 2572#ifdef CONFIG_SBMAC_COALESCE 2573 __raw_writeq(((M_MAC_INT_EOP_COUNT | M_MAC_INT_EOP_TIMER) << S_MAC_TX_CH0) | 2574 ((M_MAC_INT_EOP_COUNT | M_MAC_INT_EOP_TIMER) << S_MAC_RX_CH0), 2575 sc->sbm_imr); 2576#else 2577 __raw_writeq((M_MAC_INT_CHANNEL << S_MAC_TX_CH0) | 2578 (M_MAC_INT_CHANNEL << S_MAC_RX_CH0), sc->sbm_imr); 2579#endif 2580 } 2581 2582 return work_done; 2583} 2584 2585 2586static int sbmac_probe(struct platform_device *pldev) 2587{ 2588 struct net_device *dev; 2589 struct sbmac_softc *sc; 2590 void __iomem *sbm_base; 2591 struct resource *res; 2592 u64 sbmac_orig_hwaddr; 2593 int err; 2594 2595 res = platform_get_resource(pldev, IORESOURCE_MEM, 0); 2596 BUG_ON(!res); 2597 sbm_base = ioremap_nocache(res->start, resource_size(res)); 2598 if (!sbm_base) { 2599 printk(KERN_ERR "%s: unable to map device registers\n", 2600 dev_name(&pldev->dev)); 2601 err = -ENOMEM; 2602 goto out_out; 2603 } 2604 2605 /* 2606 * The R_MAC_ETHERNET_ADDR register will be set to some nonzero 2607 * value for us by the firmware if we're going to use this MAC. 2608 * If we find a zero, skip this MAC. 2609 */ 2610 sbmac_orig_hwaddr = __raw_readq(sbm_base + R_MAC_ETHERNET_ADDR); 2611 pr_debug("%s: %sconfiguring MAC at 0x%08Lx\n", dev_name(&pldev->dev), 2612 sbmac_orig_hwaddr ? "" : "not ", (long long)res->start); 2613 if (sbmac_orig_hwaddr == 0) { 2614 err = 0; 2615 goto out_unmap; 2616 } 2617 2618 /* 2619 * Okay, cool. Initialize this MAC. 2620 */ 2621 dev = alloc_etherdev(sizeof(struct sbmac_softc)); 2622 if (!dev) { 2623 err = -ENOMEM; 2624 goto out_unmap; 2625 } 2626 2627 dev_set_drvdata(&pldev->dev, dev); 2628 SET_NETDEV_DEV(dev, &pldev->dev); 2629 2630 sc = netdev_priv(dev); 2631 sc->sbm_base = sbm_base; 2632 2633 err = sbmac_init(pldev, res->start); 2634 if (err) 2635 goto out_kfree; 2636 2637 return 0; 2638 2639out_kfree: 2640 free_netdev(dev); 2641 __raw_writeq(sbmac_orig_hwaddr, sbm_base + R_MAC_ETHERNET_ADDR); 2642 2643out_unmap: 2644 iounmap(sbm_base); 2645 2646out_out: 2647 return err; 2648} 2649 2650static int __exit sbmac_remove(struct platform_device *pldev) 2651{ 2652 struct net_device *dev = dev_get_drvdata(&pldev->dev); 2653 struct sbmac_softc *sc = netdev_priv(dev); 2654 2655 unregister_netdev(dev); 2656 sbmac_uninitctx(sc); 2657 mdiobus_unregister(sc->mii_bus); 2658 mdiobus_free(sc->mii_bus); 2659 iounmap(sc->sbm_base); 2660 free_netdev(dev); 2661 2662 return 0; 2663} 2664 2665static struct platform_driver sbmac_driver = { 2666 .probe = sbmac_probe, 2667 .remove = __exit_p(sbmac_remove), 2668 .driver = { 2669 .name = sbmac_string, 2670 .owner = THIS_MODULE, 2671 }, 2672}; 2673 2674module_platform_driver(sbmac_driver); 2675