e1000_nvm.c revision 09e77287e752c8fc9743d865ddadc1a0d81a4927
1/******************************************************************************* 2 3 Intel(R) Gigabit Ethernet Linux driver 4 Copyright(c) 2007-2012 Intel Corporation. 5 6 This program is free software; you can redistribute it and/or modify it 7 under the terms and conditions of the GNU General Public License, 8 version 2, as published by the Free Software Foundation. 9 10 This program is distributed in the hope it will be useful, but WITHOUT 11 ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or 12 FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for 13 more details. 14 15 You should have received a copy of the GNU General Public License along with 16 this program; if not, write to the Free Software Foundation, Inc., 17 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. 18 19 The full GNU General Public License is included in this distribution in 20 the file called "COPYING". 21 22 Contact Information: 23 e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> 24 Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 25 26*******************************************************************************/ 27 28#include <linux/if_ether.h> 29#include <linux/delay.h> 30 31#include "e1000_mac.h" 32#include "e1000_nvm.h" 33 34/** 35 * igb_raise_eec_clk - Raise EEPROM clock 36 * @hw: pointer to the HW structure 37 * @eecd: pointer to the EEPROM 38 * 39 * Enable/Raise the EEPROM clock bit. 40 **/ 41static void igb_raise_eec_clk(struct e1000_hw *hw, u32 *eecd) 42{ 43 *eecd = *eecd | E1000_EECD_SK; 44 wr32(E1000_EECD, *eecd); 45 wrfl(); 46 udelay(hw->nvm.delay_usec); 47} 48 49/** 50 * igb_lower_eec_clk - Lower EEPROM clock 51 * @hw: pointer to the HW structure 52 * @eecd: pointer to the EEPROM 53 * 54 * Clear/Lower the EEPROM clock bit. 55 **/ 56static void igb_lower_eec_clk(struct e1000_hw *hw, u32 *eecd) 57{ 58 *eecd = *eecd & ~E1000_EECD_SK; 59 wr32(E1000_EECD, *eecd); 60 wrfl(); 61 udelay(hw->nvm.delay_usec); 62} 63 64/** 65 * igb_shift_out_eec_bits - Shift data bits our to the EEPROM 66 * @hw: pointer to the HW structure 67 * @data: data to send to the EEPROM 68 * @count: number of bits to shift out 69 * 70 * We need to shift 'count' bits out to the EEPROM. So, the value in the 71 * "data" parameter will be shifted out to the EEPROM one bit at a time. 72 * In order to do this, "data" must be broken down into bits. 73 **/ 74static void igb_shift_out_eec_bits(struct e1000_hw *hw, u16 data, u16 count) 75{ 76 struct e1000_nvm_info *nvm = &hw->nvm; 77 u32 eecd = rd32(E1000_EECD); 78 u32 mask; 79 80 mask = 0x01 << (count - 1); 81 if (nvm->type == e1000_nvm_eeprom_spi) 82 eecd |= E1000_EECD_DO; 83 84 do { 85 eecd &= ~E1000_EECD_DI; 86 87 if (data & mask) 88 eecd |= E1000_EECD_DI; 89 90 wr32(E1000_EECD, eecd); 91 wrfl(); 92 93 udelay(nvm->delay_usec); 94 95 igb_raise_eec_clk(hw, &eecd); 96 igb_lower_eec_clk(hw, &eecd); 97 98 mask >>= 1; 99 } while (mask); 100 101 eecd &= ~E1000_EECD_DI; 102 wr32(E1000_EECD, eecd); 103} 104 105/** 106 * igb_shift_in_eec_bits - Shift data bits in from the EEPROM 107 * @hw: pointer to the HW structure 108 * @count: number of bits to shift in 109 * 110 * In order to read a register from the EEPROM, we need to shift 'count' bits 111 * in from the EEPROM. Bits are "shifted in" by raising the clock input to 112 * the EEPROM (setting the SK bit), and then reading the value of the data out 113 * "DO" bit. During this "shifting in" process the data in "DI" bit should 114 * always be clear. 115 **/ 116static u16 igb_shift_in_eec_bits(struct e1000_hw *hw, u16 count) 117{ 118 u32 eecd; 119 u32 i; 120 u16 data; 121 122 eecd = rd32(E1000_EECD); 123 124 eecd &= ~(E1000_EECD_DO | E1000_EECD_DI); 125 data = 0; 126 127 for (i = 0; i < count; i++) { 128 data <<= 1; 129 igb_raise_eec_clk(hw, &eecd); 130 131 eecd = rd32(E1000_EECD); 132 133 eecd &= ~E1000_EECD_DI; 134 if (eecd & E1000_EECD_DO) 135 data |= 1; 136 137 igb_lower_eec_clk(hw, &eecd); 138 } 139 140 return data; 141} 142 143/** 144 * igb_poll_eerd_eewr_done - Poll for EEPROM read/write completion 145 * @hw: pointer to the HW structure 146 * @ee_reg: EEPROM flag for polling 147 * 148 * Polls the EEPROM status bit for either read or write completion based 149 * upon the value of 'ee_reg'. 150 **/ 151static s32 igb_poll_eerd_eewr_done(struct e1000_hw *hw, int ee_reg) 152{ 153 u32 attempts = 100000; 154 u32 i, reg = 0; 155 s32 ret_val = -E1000_ERR_NVM; 156 157 for (i = 0; i < attempts; i++) { 158 if (ee_reg == E1000_NVM_POLL_READ) 159 reg = rd32(E1000_EERD); 160 else 161 reg = rd32(E1000_EEWR); 162 163 if (reg & E1000_NVM_RW_REG_DONE) { 164 ret_val = 0; 165 break; 166 } 167 168 udelay(5); 169 } 170 171 return ret_val; 172} 173 174/** 175 * igb_acquire_nvm - Generic request for access to EEPROM 176 * @hw: pointer to the HW structure 177 * 178 * Set the EEPROM access request bit and wait for EEPROM access grant bit. 179 * Return successful if access grant bit set, else clear the request for 180 * EEPROM access and return -E1000_ERR_NVM (-1). 181 **/ 182s32 igb_acquire_nvm(struct e1000_hw *hw) 183{ 184 u32 eecd = rd32(E1000_EECD); 185 s32 timeout = E1000_NVM_GRANT_ATTEMPTS; 186 s32 ret_val = 0; 187 188 189 wr32(E1000_EECD, eecd | E1000_EECD_REQ); 190 eecd = rd32(E1000_EECD); 191 192 while (timeout) { 193 if (eecd & E1000_EECD_GNT) 194 break; 195 udelay(5); 196 eecd = rd32(E1000_EECD); 197 timeout--; 198 } 199 200 if (!timeout) { 201 eecd &= ~E1000_EECD_REQ; 202 wr32(E1000_EECD, eecd); 203 hw_dbg("Could not acquire NVM grant\n"); 204 ret_val = -E1000_ERR_NVM; 205 } 206 207 return ret_val; 208} 209 210/** 211 * igb_standby_nvm - Return EEPROM to standby state 212 * @hw: pointer to the HW structure 213 * 214 * Return the EEPROM to a standby state. 215 **/ 216static void igb_standby_nvm(struct e1000_hw *hw) 217{ 218 struct e1000_nvm_info *nvm = &hw->nvm; 219 u32 eecd = rd32(E1000_EECD); 220 221 if (nvm->type == e1000_nvm_eeprom_spi) { 222 /* Toggle CS to flush commands */ 223 eecd |= E1000_EECD_CS; 224 wr32(E1000_EECD, eecd); 225 wrfl(); 226 udelay(nvm->delay_usec); 227 eecd &= ~E1000_EECD_CS; 228 wr32(E1000_EECD, eecd); 229 wrfl(); 230 udelay(nvm->delay_usec); 231 } 232} 233 234/** 235 * e1000_stop_nvm - Terminate EEPROM command 236 * @hw: pointer to the HW structure 237 * 238 * Terminates the current command by inverting the EEPROM's chip select pin. 239 **/ 240static void e1000_stop_nvm(struct e1000_hw *hw) 241{ 242 u32 eecd; 243 244 eecd = rd32(E1000_EECD); 245 if (hw->nvm.type == e1000_nvm_eeprom_spi) { 246 /* Pull CS high */ 247 eecd |= E1000_EECD_CS; 248 igb_lower_eec_clk(hw, &eecd); 249 } 250} 251 252/** 253 * igb_release_nvm - Release exclusive access to EEPROM 254 * @hw: pointer to the HW structure 255 * 256 * Stop any current commands to the EEPROM and clear the EEPROM request bit. 257 **/ 258void igb_release_nvm(struct e1000_hw *hw) 259{ 260 u32 eecd; 261 262 e1000_stop_nvm(hw); 263 264 eecd = rd32(E1000_EECD); 265 eecd &= ~E1000_EECD_REQ; 266 wr32(E1000_EECD, eecd); 267} 268 269/** 270 * igb_ready_nvm_eeprom - Prepares EEPROM for read/write 271 * @hw: pointer to the HW structure 272 * 273 * Setups the EEPROM for reading and writing. 274 **/ 275static s32 igb_ready_nvm_eeprom(struct e1000_hw *hw) 276{ 277 struct e1000_nvm_info *nvm = &hw->nvm; 278 u32 eecd = rd32(E1000_EECD); 279 s32 ret_val = 0; 280 u16 timeout = 0; 281 u8 spi_stat_reg; 282 283 284 if (nvm->type == e1000_nvm_eeprom_spi) { 285 /* Clear SK and CS */ 286 eecd &= ~(E1000_EECD_CS | E1000_EECD_SK); 287 wr32(E1000_EECD, eecd); 288 wrfl(); 289 udelay(1); 290 timeout = NVM_MAX_RETRY_SPI; 291 292 /* 293 * Read "Status Register" repeatedly until the LSB is cleared. 294 * The EEPROM will signal that the command has been completed 295 * by clearing bit 0 of the internal status register. If it's 296 * not cleared within 'timeout', then error out. 297 */ 298 while (timeout) { 299 igb_shift_out_eec_bits(hw, NVM_RDSR_OPCODE_SPI, 300 hw->nvm.opcode_bits); 301 spi_stat_reg = (u8)igb_shift_in_eec_bits(hw, 8); 302 if (!(spi_stat_reg & NVM_STATUS_RDY_SPI)) 303 break; 304 305 udelay(5); 306 igb_standby_nvm(hw); 307 timeout--; 308 } 309 310 if (!timeout) { 311 hw_dbg("SPI NVM Status error\n"); 312 ret_val = -E1000_ERR_NVM; 313 goto out; 314 } 315 } 316 317out: 318 return ret_val; 319} 320 321/** 322 * igb_read_nvm_spi - Read EEPROM's using SPI 323 * @hw: pointer to the HW structure 324 * @offset: offset of word in the EEPROM to read 325 * @words: number of words to read 326 * @data: word read from the EEPROM 327 * 328 * Reads a 16 bit word from the EEPROM. 329 **/ 330s32 igb_read_nvm_spi(struct e1000_hw *hw, u16 offset, u16 words, u16 *data) 331{ 332 struct e1000_nvm_info *nvm = &hw->nvm; 333 u32 i = 0; 334 s32 ret_val; 335 u16 word_in; 336 u8 read_opcode = NVM_READ_OPCODE_SPI; 337 338 /* 339 * A check for invalid values: offset too large, too many words, 340 * and not enough words. 341 */ 342 if ((offset >= nvm->word_size) || (words > (nvm->word_size - offset)) || 343 (words == 0)) { 344 hw_dbg("nvm parameter(s) out of bounds\n"); 345 ret_val = -E1000_ERR_NVM; 346 goto out; 347 } 348 349 ret_val = nvm->ops.acquire(hw); 350 if (ret_val) 351 goto out; 352 353 ret_val = igb_ready_nvm_eeprom(hw); 354 if (ret_val) 355 goto release; 356 357 igb_standby_nvm(hw); 358 359 if ((nvm->address_bits == 8) && (offset >= 128)) 360 read_opcode |= NVM_A8_OPCODE_SPI; 361 362 /* Send the READ command (opcode + addr) */ 363 igb_shift_out_eec_bits(hw, read_opcode, nvm->opcode_bits); 364 igb_shift_out_eec_bits(hw, (u16)(offset*2), nvm->address_bits); 365 366 /* 367 * Read the data. SPI NVMs increment the address with each byte 368 * read and will roll over if reading beyond the end. This allows 369 * us to read the whole NVM from any offset 370 */ 371 for (i = 0; i < words; i++) { 372 word_in = igb_shift_in_eec_bits(hw, 16); 373 data[i] = (word_in >> 8) | (word_in << 8); 374 } 375 376release: 377 nvm->ops.release(hw); 378 379out: 380 return ret_val; 381} 382 383/** 384 * igb_read_nvm_eerd - Reads EEPROM using EERD register 385 * @hw: pointer to the HW structure 386 * @offset: offset of word in the EEPROM to read 387 * @words: number of words to read 388 * @data: word read from the EEPROM 389 * 390 * Reads a 16 bit word from the EEPROM using the EERD register. 391 **/ 392s32 igb_read_nvm_eerd(struct e1000_hw *hw, u16 offset, u16 words, u16 *data) 393{ 394 struct e1000_nvm_info *nvm = &hw->nvm; 395 u32 i, eerd = 0; 396 s32 ret_val = 0; 397 398 /* 399 * A check for invalid values: offset too large, too many words, 400 * and not enough words. 401 */ 402 if ((offset >= nvm->word_size) || (words > (nvm->word_size - offset)) || 403 (words == 0)) { 404 hw_dbg("nvm parameter(s) out of bounds\n"); 405 ret_val = -E1000_ERR_NVM; 406 goto out; 407 } 408 409 for (i = 0; i < words; i++) { 410 eerd = ((offset+i) << E1000_NVM_RW_ADDR_SHIFT) + 411 E1000_NVM_RW_REG_START; 412 413 wr32(E1000_EERD, eerd); 414 ret_val = igb_poll_eerd_eewr_done(hw, E1000_NVM_POLL_READ); 415 if (ret_val) 416 break; 417 418 data[i] = (rd32(E1000_EERD) >> 419 E1000_NVM_RW_REG_DATA); 420 } 421 422out: 423 return ret_val; 424} 425 426/** 427 * igb_write_nvm_spi - Write to EEPROM using SPI 428 * @hw: pointer to the HW structure 429 * @offset: offset within the EEPROM to be written to 430 * @words: number of words to write 431 * @data: 16 bit word(s) to be written to the EEPROM 432 * 433 * Writes data to EEPROM at offset using SPI interface. 434 * 435 * If e1000_update_nvm_checksum is not called after this function , the 436 * EEPROM will most likley contain an invalid checksum. 437 **/ 438s32 igb_write_nvm_spi(struct e1000_hw *hw, u16 offset, u16 words, u16 *data) 439{ 440 struct e1000_nvm_info *nvm = &hw->nvm; 441 s32 ret_val; 442 u16 widx = 0; 443 444 /* 445 * A check for invalid values: offset too large, too many words, 446 * and not enough words. 447 */ 448 if ((offset >= nvm->word_size) || (words > (nvm->word_size - offset)) || 449 (words == 0)) { 450 hw_dbg("nvm parameter(s) out of bounds\n"); 451 ret_val = -E1000_ERR_NVM; 452 goto out; 453 } 454 455 ret_val = hw->nvm.ops.acquire(hw); 456 if (ret_val) 457 goto out; 458 459 msleep(10); 460 461 while (widx < words) { 462 u8 write_opcode = NVM_WRITE_OPCODE_SPI; 463 464 ret_val = igb_ready_nvm_eeprom(hw); 465 if (ret_val) 466 goto release; 467 468 igb_standby_nvm(hw); 469 470 /* Send the WRITE ENABLE command (8 bit opcode) */ 471 igb_shift_out_eec_bits(hw, NVM_WREN_OPCODE_SPI, 472 nvm->opcode_bits); 473 474 igb_standby_nvm(hw); 475 476 /* 477 * Some SPI eeproms use the 8th address bit embedded in the 478 * opcode 479 */ 480 if ((nvm->address_bits == 8) && (offset >= 128)) 481 write_opcode |= NVM_A8_OPCODE_SPI; 482 483 /* Send the Write command (8-bit opcode + addr) */ 484 igb_shift_out_eec_bits(hw, write_opcode, nvm->opcode_bits); 485 igb_shift_out_eec_bits(hw, (u16)((offset + widx) * 2), 486 nvm->address_bits); 487 488 /* Loop to allow for up to whole page write of eeprom */ 489 while (widx < words) { 490 u16 word_out = data[widx]; 491 word_out = (word_out >> 8) | (word_out << 8); 492 igb_shift_out_eec_bits(hw, word_out, 16); 493 widx++; 494 495 if ((((offset + widx) * 2) % nvm->page_size) == 0) { 496 igb_standby_nvm(hw); 497 break; 498 } 499 } 500 } 501 502 msleep(10); 503release: 504 hw->nvm.ops.release(hw); 505 506out: 507 return ret_val; 508} 509 510/** 511 * igb_read_part_string - Read device part number 512 * @hw: pointer to the HW structure 513 * @part_num: pointer to device part number 514 * @part_num_size: size of part number buffer 515 * 516 * Reads the product board assembly (PBA) number from the EEPROM and stores 517 * the value in part_num. 518 **/ 519s32 igb_read_part_string(struct e1000_hw *hw, u8 *part_num, u32 part_num_size) 520{ 521 s32 ret_val; 522 u16 nvm_data; 523 u16 pointer; 524 u16 offset; 525 u16 length; 526 527 if (part_num == NULL) { 528 hw_dbg("PBA string buffer was null\n"); 529 ret_val = E1000_ERR_INVALID_ARGUMENT; 530 goto out; 531 } 532 533 ret_val = hw->nvm.ops.read(hw, NVM_PBA_OFFSET_0, 1, &nvm_data); 534 if (ret_val) { 535 hw_dbg("NVM Read Error\n"); 536 goto out; 537 } 538 539 ret_val = hw->nvm.ops.read(hw, NVM_PBA_OFFSET_1, 1, &pointer); 540 if (ret_val) { 541 hw_dbg("NVM Read Error\n"); 542 goto out; 543 } 544 545 /* 546 * if nvm_data is not ptr guard the PBA must be in legacy format which 547 * means pointer is actually our second data word for the PBA number 548 * and we can decode it into an ascii string 549 */ 550 if (nvm_data != NVM_PBA_PTR_GUARD) { 551 hw_dbg("NVM PBA number is not stored as string\n"); 552 553 /* we will need 11 characters to store the PBA */ 554 if (part_num_size < 11) { 555 hw_dbg("PBA string buffer too small\n"); 556 return E1000_ERR_NO_SPACE; 557 } 558 559 /* extract hex string from data and pointer */ 560 part_num[0] = (nvm_data >> 12) & 0xF; 561 part_num[1] = (nvm_data >> 8) & 0xF; 562 part_num[2] = (nvm_data >> 4) & 0xF; 563 part_num[3] = nvm_data & 0xF; 564 part_num[4] = (pointer >> 12) & 0xF; 565 part_num[5] = (pointer >> 8) & 0xF; 566 part_num[6] = '-'; 567 part_num[7] = 0; 568 part_num[8] = (pointer >> 4) & 0xF; 569 part_num[9] = pointer & 0xF; 570 571 /* put a null character on the end of our string */ 572 part_num[10] = '\0'; 573 574 /* switch all the data but the '-' to hex char */ 575 for (offset = 0; offset < 10; offset++) { 576 if (part_num[offset] < 0xA) 577 part_num[offset] += '0'; 578 else if (part_num[offset] < 0x10) 579 part_num[offset] += 'A' - 0xA; 580 } 581 582 goto out; 583 } 584 585 ret_val = hw->nvm.ops.read(hw, pointer, 1, &length); 586 if (ret_val) { 587 hw_dbg("NVM Read Error\n"); 588 goto out; 589 } 590 591 if (length == 0xFFFF || length == 0) { 592 hw_dbg("NVM PBA number section invalid length\n"); 593 ret_val = E1000_ERR_NVM_PBA_SECTION; 594 goto out; 595 } 596 /* check if part_num buffer is big enough */ 597 if (part_num_size < (((u32)length * 2) - 1)) { 598 hw_dbg("PBA string buffer too small\n"); 599 ret_val = E1000_ERR_NO_SPACE; 600 goto out; 601 } 602 603 /* trim pba length from start of string */ 604 pointer++; 605 length--; 606 607 for (offset = 0; offset < length; offset++) { 608 ret_val = hw->nvm.ops.read(hw, pointer + offset, 1, &nvm_data); 609 if (ret_val) { 610 hw_dbg("NVM Read Error\n"); 611 goto out; 612 } 613 part_num[offset * 2] = (u8)(nvm_data >> 8); 614 part_num[(offset * 2) + 1] = (u8)(nvm_data & 0xFF); 615 } 616 part_num[offset * 2] = '\0'; 617 618out: 619 return ret_val; 620} 621 622/** 623 * igb_read_mac_addr - Read device MAC address 624 * @hw: pointer to the HW structure 625 * 626 * Reads the device MAC address from the EEPROM and stores the value. 627 * Since devices with two ports use the same EEPROM, we increment the 628 * last bit in the MAC address for the second port. 629 **/ 630s32 igb_read_mac_addr(struct e1000_hw *hw) 631{ 632 u32 rar_high; 633 u32 rar_low; 634 u16 i; 635 636 rar_high = rd32(E1000_RAH(0)); 637 rar_low = rd32(E1000_RAL(0)); 638 639 for (i = 0; i < E1000_RAL_MAC_ADDR_LEN; i++) 640 hw->mac.perm_addr[i] = (u8)(rar_low >> (i*8)); 641 642 for (i = 0; i < E1000_RAH_MAC_ADDR_LEN; i++) 643 hw->mac.perm_addr[i+4] = (u8)(rar_high >> (i*8)); 644 645 for (i = 0; i < ETH_ALEN; i++) 646 hw->mac.addr[i] = hw->mac.perm_addr[i]; 647 648 return 0; 649} 650 651/** 652 * igb_validate_nvm_checksum - Validate EEPROM checksum 653 * @hw: pointer to the HW structure 654 * 655 * Calculates the EEPROM checksum by reading/adding each word of the EEPROM 656 * and then verifies that the sum of the EEPROM is equal to 0xBABA. 657 **/ 658s32 igb_validate_nvm_checksum(struct e1000_hw *hw) 659{ 660 s32 ret_val = 0; 661 u16 checksum = 0; 662 u16 i, nvm_data; 663 664 for (i = 0; i < (NVM_CHECKSUM_REG + 1); i++) { 665 ret_val = hw->nvm.ops.read(hw, i, 1, &nvm_data); 666 if (ret_val) { 667 hw_dbg("NVM Read Error\n"); 668 goto out; 669 } 670 checksum += nvm_data; 671 } 672 673 if (checksum != (u16) NVM_SUM) { 674 hw_dbg("NVM Checksum Invalid\n"); 675 ret_val = -E1000_ERR_NVM; 676 goto out; 677 } 678 679out: 680 return ret_val; 681} 682 683/** 684 * igb_update_nvm_checksum - Update EEPROM checksum 685 * @hw: pointer to the HW structure 686 * 687 * Updates the EEPROM checksum by reading/adding each word of the EEPROM 688 * up to the checksum. Then calculates the EEPROM checksum and writes the 689 * value to the EEPROM. 690 **/ 691s32 igb_update_nvm_checksum(struct e1000_hw *hw) 692{ 693 s32 ret_val; 694 u16 checksum = 0; 695 u16 i, nvm_data; 696 697 for (i = 0; i < NVM_CHECKSUM_REG; i++) { 698 ret_val = hw->nvm.ops.read(hw, i, 1, &nvm_data); 699 if (ret_val) { 700 hw_dbg("NVM Read Error while updating checksum.\n"); 701 goto out; 702 } 703 checksum += nvm_data; 704 } 705 checksum = (u16) NVM_SUM - checksum; 706 ret_val = hw->nvm.ops.write(hw, NVM_CHECKSUM_REG, 1, &checksum); 707 if (ret_val) 708 hw_dbg("NVM Write Error while updating checksum.\n"); 709 710out: 711 return ret_val; 712} 713 714/** 715 * igb_get_fw_version - Get firmware version information 716 * @hw: pointer to the HW structure 717 * @fw_vers: pointer to output structure 718 * 719 * unsupported MAC types will return all 0 version structure 720 **/ 721void igb_get_fw_version(struct e1000_hw *hw, struct e1000_fw_version *fw_vers) 722{ 723 u16 eeprom_verh, eeprom_verl, comb_verh, comb_verl, comb_offset; 724 u16 fw_version; 725 726 memset(fw_vers, 0, sizeof(struct e1000_fw_version)); 727 728 switch (hw->mac.type) { 729 case e1000_i211: 730 igb_read_invm_version(hw, fw_vers); 731 return; 732 case e1000_82575: 733 case e1000_82576: 734 case e1000_82580: 735 case e1000_i350: 736 case e1000_i210: 737 break; 738 default: 739 return; 740 } 741 /* basic eeprom version numbers */ 742 hw->nvm.ops.read(hw, NVM_VERSION, 1, &fw_version); 743 fw_vers->eep_major = (fw_version & NVM_MAJOR_MASK) >> NVM_MAJOR_SHIFT; 744 fw_vers->eep_minor = (fw_version & NVM_MINOR_MASK); 745 746 /* etrack id */ 747 hw->nvm.ops.read(hw, NVM_ETRACK_WORD, 1, &eeprom_verl); 748 hw->nvm.ops.read(hw, (NVM_ETRACK_WORD + 1), 1, &eeprom_verh); 749 fw_vers->etrack_id = (eeprom_verh << NVM_ETRACK_SHIFT) | eeprom_verl; 750 751 switch (hw->mac.type) { 752 case e1000_i210: 753 case e1000_i350: 754 /* find combo image version */ 755 hw->nvm.ops.read(hw, NVM_COMB_VER_PTR, 1, &comb_offset); 756 if ((comb_offset != 0x0) && (comb_offset != NVM_VER_INVALID)) { 757 758 hw->nvm.ops.read(hw, (NVM_COMB_VER_OFF + comb_offset 759 + 1), 1, &comb_verh); 760 hw->nvm.ops.read(hw, (NVM_COMB_VER_OFF + comb_offset), 761 1, &comb_verl); 762 763 /* get Option Rom version if it exists and is valid */ 764 if ((comb_verh && comb_verl) && 765 ((comb_verh != NVM_VER_INVALID) && 766 (comb_verl != NVM_VER_INVALID))) { 767 768 fw_vers->or_valid = true; 769 fw_vers->or_major = 770 comb_verl >> NVM_COMB_VER_SHFT; 771 fw_vers->or_build = 772 ((comb_verl << NVM_COMB_VER_SHFT) 773 | (comb_verh >> NVM_COMB_VER_SHFT)); 774 fw_vers->or_patch = 775 comb_verh & NVM_COMB_VER_MASK; 776 } 777 } 778 break; 779 default: 780 break; 781 } 782 return; 783} 784