1/* $Id: cosa.h,v 1.6 1999/01/06 14:02:44 kas Exp $ */
2
3/*
4 *  Copyright (C) 1995-1997  Jan "Yenya" Kasprzak <kas@fi.muni.cz>
5 *
6 *  This program is free software; you can redistribute it and/or modify
7 *  it under the terms of the GNU General Public License as published by
8 *  the Free Software Foundation; either version 2 of the License, or
9 *  (at your option) any later version.
10 *
11 *  This program is distributed in the hope that it will be useful,
12 *  but WITHOUT ANY WARRANTY; without even the implied warranty of
13 *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
14 *  GNU General Public License for more details.
15 *
16 *  You should have received a copy of the GNU General Public License
17 *  along with this program; if not, write to the Free Software
18 *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
19 */
20
21#ifndef COSA_H__
22#define COSA_H__
23
24#include <linux/ioctl.h>
25
26#ifdef __KERNEL__
27/* status register - output bits */
28#define SR_RX_DMA_ENA   0x04    /* receiver DMA enable bit */
29#define SR_TX_DMA_ENA   0x08    /* transmitter DMA enable bit */
30#define SR_RST          0x10    /* SRP reset */
31#define SR_USR_INT_ENA  0x20    /* user interrupt enable bit */
32#define SR_TX_INT_ENA   0x40    /* transmitter interrupt enable bit */
33#define SR_RX_INT_ENA   0x80    /* receiver interrupt enable bit */
34
35/* status register - input bits */
36#define SR_USR_RQ       0x20    /* user interrupt request pending */
37#define SR_TX_RDY       0x40    /* transmitter empty (ready) */
38#define SR_RX_RDY       0x80    /* receiver data ready */
39
40#define SR_UP_REQUEST   0x02    /* request from SRP to transfer data
41                                   up to PC */
42#define SR_DOWN_REQUEST 0x01    /* SRP is able to transfer data down
43                                   from PC to SRP */
44#define SR_END_OF_TRANSFER      0x03    /* SRP signalize end of
45                                           transfer (up or down) */
46
47#define SR_CMD_FROM_SRP_MASK    0x03    /* mask to get SRP command */
48
49/* bits in driver status byte definitions : */
50#define SR_RDY_RCV      0x01    /* ready to receive packet */
51#define SR_RDY_SND      0x02    /* ready to send packet */
52#define SR_CMD_PND      0x04    /* command pending */ /* not currently used */
53
54/* ???? */
55#define SR_PKT_UP       0x01    /* transfer of packet up in progress */
56#define SR_PKT_DOWN     0x02    /* transfer of packet down in progress */
57
58#endif /* __KERNEL__ */
59
60#define SR_LOAD_ADDR    0x4400  /* SRP microcode load address */
61#define SR_START_ADDR   0x4400  /* SRP microcode start address */
62
63#define COSA_LOAD_ADDR    0x400  /* SRP microcode load address */
64#define COSA_MAX_FIRMWARE_SIZE	0x10000
65
66/* ioctls */
67struct cosa_download {
68	int addr, len;
69	char __user *code;
70};
71
72/* Reset the device */
73#define COSAIORSET	_IO('C',0xf0)
74
75/* Start microcode at given address */
76#define COSAIOSTRT	_IOW('C',0xf1, int)
77
78/* Read the block from the device memory */
79#define COSAIORMEM	_IOWR('C',0xf2, struct cosa_download *)
80	/* actually the struct cosa_download itself; this is to keep
81	 * the ioctl number same as in 2.4 in order to keep the user-space
82	 * utils compatible. */
83
84/* Write the block to the device memory (i.e. download the microcode) */
85#define COSAIODOWNLD	_IOW('C',0xf2, struct cosa_download *)
86	/* actually the struct cosa_download itself; this is to keep
87	 * the ioctl number same as in 2.4 in order to keep the user-space
88	 * utils compatible. */
89
90/* Read the device type (one of "srp", "cosa", and "cosa8" for now) */
91#define COSAIORTYPE	_IOR('C',0xf3, char *)
92
93/* Read the device identification string */
94#define COSAIORIDSTR	_IOR('C',0xf4, char *)
95/* Maximum length of the identification string. */
96#define COSA_MAX_ID_STRING 128
97
98/* Increment/decrement the module usage count :-) */
99/* #define COSAIOMINC	_IO('C',0xf5) */
100/* #define COSAIOMDEC	_IO('C',0xf6) */
101
102/* Get the total number of cards installed */
103#define COSAIONRCARDS	_IO('C',0xf7)
104
105/* Get the number of channels on this card */
106#define COSAIONRCHANS	_IO('C',0xf8)
107
108/* Set the driver for the bus-master operations */
109#define COSAIOBMSET	_IOW('C', 0xf9, unsigned short)
110
111#define COSA_BM_OFF	0	/* Bus-mastering off - use ISA DMA (default) */
112#define COSA_BM_ON	1	/* Bus-mastering on - faster but untested */
113
114/* Gets the busmaster status */
115#define COSAIOBMGET	_IO('C', 0xfa)
116
117#endif /* !COSA_H__ */
118