ath5k.h revision 2111ac0d888767999c7dd6d1309dcc1fb8012022
1/* 2 * Copyright (c) 2004-2007 Reyk Floeter <reyk@openbsd.org> 3 * Copyright (c) 2006-2007 Nick Kossifidis <mickflemm@gmail.com> 4 * 5 * Permission to use, copy, modify, and distribute this software for any 6 * purpose with or without fee is hereby granted, provided that the above 7 * copyright notice and this permission notice appear in all copies. 8 * 9 * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES 10 * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF 11 * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR 12 * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES 13 * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN 14 * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF 15 * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. 16 */ 17 18#ifndef _ATH5K_H 19#define _ATH5K_H 20 21/* TODO: Clean up channel debuging -doesn't work anyway- and start 22 * working on reg. control code using all available eeprom information 23 * -rev. engineering needed- */ 24#define CHAN_DEBUG 0 25 26#include <linux/io.h> 27#include <linux/types.h> 28#include <net/mac80211.h> 29 30/* RX/TX descriptor hw structs 31 * TODO: Driver part should only see sw structs */ 32#include "desc.h" 33 34/* EEPROM structs/offsets 35 * TODO: Make a more generic struct (eg. add more stuff to ath5k_capabilities) 36 * and clean up common bits, then introduce set/get functions in eeprom.c */ 37#include "eeprom.h" 38#include "../ath.h" 39 40/* PCI IDs */ 41#define PCI_DEVICE_ID_ATHEROS_AR5210 0x0007 /* AR5210 */ 42#define PCI_DEVICE_ID_ATHEROS_AR5311 0x0011 /* AR5311 */ 43#define PCI_DEVICE_ID_ATHEROS_AR5211 0x0012 /* AR5211 */ 44#define PCI_DEVICE_ID_ATHEROS_AR5212 0x0013 /* AR5212 */ 45#define PCI_DEVICE_ID_3COM_3CRDAG675 0x0013 /* 3CRDAG675 (Atheros AR5212) */ 46#define PCI_DEVICE_ID_3COM_2_3CRPAG175 0x0013 /* 3CRPAG175 (Atheros AR5212) */ 47#define PCI_DEVICE_ID_ATHEROS_AR5210_AP 0x0207 /* AR5210 (Early) */ 48#define PCI_DEVICE_ID_ATHEROS_AR5212_IBM 0x1014 /* AR5212 (IBM MiniPCI) */ 49#define PCI_DEVICE_ID_ATHEROS_AR5210_DEFAULT 0x1107 /* AR5210 (no eeprom) */ 50#define PCI_DEVICE_ID_ATHEROS_AR5212_DEFAULT 0x1113 /* AR5212 (no eeprom) */ 51#define PCI_DEVICE_ID_ATHEROS_AR5211_DEFAULT 0x1112 /* AR5211 (no eeprom) */ 52#define PCI_DEVICE_ID_ATHEROS_AR5212_FPGA 0xf013 /* AR5212 (emulation board) */ 53#define PCI_DEVICE_ID_ATHEROS_AR5211_LEGACY 0xff12 /* AR5211 (emulation board) */ 54#define PCI_DEVICE_ID_ATHEROS_AR5211_FPGA11B 0xf11b /* AR5211 (emulation board) */ 55#define PCI_DEVICE_ID_ATHEROS_AR5312_REV2 0x0052 /* AR5312 WMAC (AP31) */ 56#define PCI_DEVICE_ID_ATHEROS_AR5312_REV7 0x0057 /* AR5312 WMAC (AP30-040) */ 57#define PCI_DEVICE_ID_ATHEROS_AR5312_REV8 0x0058 /* AR5312 WMAC (AP43-030) */ 58#define PCI_DEVICE_ID_ATHEROS_AR5212_0014 0x0014 /* AR5212 compatible */ 59#define PCI_DEVICE_ID_ATHEROS_AR5212_0015 0x0015 /* AR5212 compatible */ 60#define PCI_DEVICE_ID_ATHEROS_AR5212_0016 0x0016 /* AR5212 compatible */ 61#define PCI_DEVICE_ID_ATHEROS_AR5212_0017 0x0017 /* AR5212 compatible */ 62#define PCI_DEVICE_ID_ATHEROS_AR5212_0018 0x0018 /* AR5212 compatible */ 63#define PCI_DEVICE_ID_ATHEROS_AR5212_0019 0x0019 /* AR5212 compatible */ 64#define PCI_DEVICE_ID_ATHEROS_AR2413 0x001a /* AR2413 (Griffin-lite) */ 65#define PCI_DEVICE_ID_ATHEROS_AR5413 0x001b /* AR5413 (Eagle) */ 66#define PCI_DEVICE_ID_ATHEROS_AR5424 0x001c /* AR5424 (Condor PCI-E) */ 67#define PCI_DEVICE_ID_ATHEROS_AR5416 0x0023 /* AR5416 */ 68#define PCI_DEVICE_ID_ATHEROS_AR5418 0x0024 /* AR5418 */ 69 70/****************************\ 71 GENERIC DRIVER DEFINITIONS 72\****************************/ 73 74#define ATH5K_PRINTF(fmt, ...) printk("%s: " fmt, __func__, ##__VA_ARGS__) 75 76#define ATH5K_PRINTK(_sc, _level, _fmt, ...) \ 77 printk(_level "ath5k %s: " _fmt, \ 78 ((_sc) && (_sc)->hw) ? wiphy_name((_sc)->hw->wiphy) : "", \ 79 ##__VA_ARGS__) 80 81#define ATH5K_PRINTK_LIMIT(_sc, _level, _fmt, ...) do { \ 82 if (net_ratelimit()) \ 83 ATH5K_PRINTK(_sc, _level, _fmt, ##__VA_ARGS__); \ 84 } while (0) 85 86#define ATH5K_INFO(_sc, _fmt, ...) \ 87 ATH5K_PRINTK(_sc, KERN_INFO, _fmt, ##__VA_ARGS__) 88 89#define ATH5K_WARN(_sc, _fmt, ...) \ 90 ATH5K_PRINTK_LIMIT(_sc, KERN_WARNING, _fmt, ##__VA_ARGS__) 91 92#define ATH5K_ERR(_sc, _fmt, ...) \ 93 ATH5K_PRINTK_LIMIT(_sc, KERN_ERR, _fmt, ##__VA_ARGS__) 94 95/* 96 * AR5K REGISTER ACCESS 97 */ 98 99/* Some macros to read/write fields */ 100 101/* First shift, then mask */ 102#define AR5K_REG_SM(_val, _flags) \ 103 (((_val) << _flags##_S) & (_flags)) 104 105/* First mask, then shift */ 106#define AR5K_REG_MS(_val, _flags) \ 107 (((_val) & (_flags)) >> _flags##_S) 108 109/* Some registers can hold multiple values of interest. For this 110 * reason when we want to write to these registers we must first 111 * retrieve the values which we do not want to clear (lets call this 112 * old_data) and then set the register with this and our new_value: 113 * ( old_data | new_value) */ 114#define AR5K_REG_WRITE_BITS(ah, _reg, _flags, _val) \ 115 ath5k_hw_reg_write(ah, (ath5k_hw_reg_read(ah, _reg) & ~(_flags)) | \ 116 (((_val) << _flags##_S) & (_flags)), _reg) 117 118#define AR5K_REG_MASKED_BITS(ah, _reg, _flags, _mask) \ 119 ath5k_hw_reg_write(ah, (ath5k_hw_reg_read(ah, _reg) & \ 120 (_mask)) | (_flags), _reg) 121 122#define AR5K_REG_ENABLE_BITS(ah, _reg, _flags) \ 123 ath5k_hw_reg_write(ah, ath5k_hw_reg_read(ah, _reg) | (_flags), _reg) 124 125#define AR5K_REG_DISABLE_BITS(ah, _reg, _flags) \ 126 ath5k_hw_reg_write(ah, ath5k_hw_reg_read(ah, _reg) & ~(_flags), _reg) 127 128/* Access to PHY registers */ 129#define AR5K_PHY_READ(ah, _reg) \ 130 ath5k_hw_reg_read(ah, (ah)->ah_phy + ((_reg) << 2)) 131 132#define AR5K_PHY_WRITE(ah, _reg, _val) \ 133 ath5k_hw_reg_write(ah, _val, (ah)->ah_phy + ((_reg) << 2)) 134 135/* Access QCU registers per queue */ 136#define AR5K_REG_READ_Q(ah, _reg, _queue) \ 137 (ath5k_hw_reg_read(ah, _reg) & (1 << _queue)) \ 138 139#define AR5K_REG_WRITE_Q(ah, _reg, _queue) \ 140 ath5k_hw_reg_write(ah, (1 << _queue), _reg) 141 142#define AR5K_Q_ENABLE_BITS(_reg, _queue) do { \ 143 _reg |= 1 << _queue; \ 144} while (0) 145 146#define AR5K_Q_DISABLE_BITS(_reg, _queue) do { \ 147 _reg &= ~(1 << _queue); \ 148} while (0) 149 150/* Used while writing initvals */ 151#define AR5K_REG_WAIT(_i) do { \ 152 if (_i % 64) \ 153 udelay(1); \ 154} while (0) 155 156/* Register dumps are done per operation mode */ 157#define AR5K_INI_RFGAIN_5GHZ 0 158#define AR5K_INI_RFGAIN_2GHZ 1 159 160/* TODO: Clean this up */ 161#define AR5K_INI_VAL_11A 0 162#define AR5K_INI_VAL_11A_TURBO 1 163#define AR5K_INI_VAL_11B 2 164#define AR5K_INI_VAL_11G 3 165#define AR5K_INI_VAL_11G_TURBO 4 166#define AR5K_INI_VAL_XR 0 167#define AR5K_INI_VAL_MAX 5 168 169/* 170 * Some tuneable values (these should be changeable by the user) 171 * TODO: Make use of them and add more options OR use debug/configfs 172 */ 173#define AR5K_TUNE_DMA_BEACON_RESP 2 174#define AR5K_TUNE_SW_BEACON_RESP 10 175#define AR5K_TUNE_ADDITIONAL_SWBA_BACKOFF 0 176#define AR5K_TUNE_RADAR_ALERT false 177#define AR5K_TUNE_MIN_TX_FIFO_THRES 1 178#define AR5K_TUNE_MAX_TX_FIFO_THRES ((IEEE80211_MAX_LEN / 64) + 1) 179#define AR5K_TUNE_REGISTER_TIMEOUT 20000 180/* Register for RSSI threshold has a mask of 0xff, so 255 seems to 181 * be the max value. */ 182#define AR5K_TUNE_RSSI_THRES 129 183/* This must be set when setting the RSSI threshold otherwise it can 184 * prevent a reset. If AR5K_RSSI_THR is read after writing to it 185 * the BMISS_THRES will be seen as 0, seems harware doesn't keep 186 * track of it. Max value depends on harware. For AR5210 this is just 7. 187 * For AR5211+ this seems to be up to 255. */ 188#define AR5K_TUNE_BMISS_THRES 7 189#define AR5K_TUNE_REGISTER_DWELL_TIME 20000 190#define AR5K_TUNE_BEACON_INTERVAL 100 191#define AR5K_TUNE_AIFS 2 192#define AR5K_TUNE_AIFS_11B 2 193#define AR5K_TUNE_AIFS_XR 0 194#define AR5K_TUNE_CWMIN 15 195#define AR5K_TUNE_CWMIN_11B 31 196#define AR5K_TUNE_CWMIN_XR 3 197#define AR5K_TUNE_CWMAX 1023 198#define AR5K_TUNE_CWMAX_11B 1023 199#define AR5K_TUNE_CWMAX_XR 7 200#define AR5K_TUNE_NOISE_FLOOR -72 201#define AR5K_TUNE_CCA_MAX_GOOD_VALUE -95 202#define AR5K_TUNE_MAX_TXPOWER 63 203#define AR5K_TUNE_DEFAULT_TXPOWER 25 204#define AR5K_TUNE_TPC_TXPOWER false 205#define ATH5K_TUNE_CALIBRATION_INTERVAL_FULL 10000 /* 10 sec */ 206#define ATH5K_TUNE_CALIBRATION_INTERVAL_ANI 1000 /* 1 sec */ 207 208#define AR5K_INIT_CARR_SENSE_EN 1 209 210/*Swap RX/TX Descriptor for big endian archs*/ 211#if defined(__BIG_ENDIAN) 212#define AR5K_INIT_CFG ( \ 213 AR5K_CFG_SWTD | AR5K_CFG_SWRD \ 214) 215#else 216#define AR5K_INIT_CFG 0x00000000 217#endif 218 219/* Initial values */ 220#define AR5K_INIT_CYCRSSI_THR1 2 221#define AR5K_INIT_TX_LATENCY 502 222#define AR5K_INIT_USEC 39 223#define AR5K_INIT_USEC_TURBO 79 224#define AR5K_INIT_USEC_32 31 225#define AR5K_INIT_SLOT_TIME 396 226#define AR5K_INIT_SLOT_TIME_TURBO 480 227#define AR5K_INIT_ACK_CTS_TIMEOUT 1024 228#define AR5K_INIT_ACK_CTS_TIMEOUT_TURBO 0x08000800 229#define AR5K_INIT_PROG_IFS 920 230#define AR5K_INIT_PROG_IFS_TURBO 960 231#define AR5K_INIT_EIFS 3440 232#define AR5K_INIT_EIFS_TURBO 6880 233#define AR5K_INIT_SIFS 560 234#define AR5K_INIT_SIFS_TURBO 480 235#define AR5K_INIT_SH_RETRY 10 236#define AR5K_INIT_LG_RETRY AR5K_INIT_SH_RETRY 237#define AR5K_INIT_SSH_RETRY 32 238#define AR5K_INIT_SLG_RETRY AR5K_INIT_SSH_RETRY 239#define AR5K_INIT_TX_RETRY 10 240 241#define AR5K_INIT_TRANSMIT_LATENCY ( \ 242 (AR5K_INIT_TX_LATENCY << 14) | (AR5K_INIT_USEC_32 << 7) | \ 243 (AR5K_INIT_USEC) \ 244) 245#define AR5K_INIT_TRANSMIT_LATENCY_TURBO ( \ 246 (AR5K_INIT_TX_LATENCY << 14) | (AR5K_INIT_USEC_32 << 7) | \ 247 (AR5K_INIT_USEC_TURBO) \ 248) 249#define AR5K_INIT_PROTO_TIME_CNTRL ( \ 250 (AR5K_INIT_CARR_SENSE_EN << 26) | (AR5K_INIT_EIFS << 12) | \ 251 (AR5K_INIT_PROG_IFS) \ 252) 253#define AR5K_INIT_PROTO_TIME_CNTRL_TURBO ( \ 254 (AR5K_INIT_CARR_SENSE_EN << 26) | (AR5K_INIT_EIFS_TURBO << 12) | \ 255 (AR5K_INIT_PROG_IFS_TURBO) \ 256) 257 258/* token to use for aifs, cwmin, cwmax in MadWiFi */ 259#define AR5K_TXQ_USEDEFAULT ((u32) -1) 260 261/* GENERIC CHIPSET DEFINITIONS */ 262 263/* MAC Chips */ 264enum ath5k_version { 265 AR5K_AR5210 = 0, 266 AR5K_AR5211 = 1, 267 AR5K_AR5212 = 2, 268}; 269 270/* PHY Chips */ 271enum ath5k_radio { 272 AR5K_RF5110 = 0, 273 AR5K_RF5111 = 1, 274 AR5K_RF5112 = 2, 275 AR5K_RF2413 = 3, 276 AR5K_RF5413 = 4, 277 AR5K_RF2316 = 5, 278 AR5K_RF2317 = 6, 279 AR5K_RF2425 = 7, 280}; 281 282/* 283 * Common silicon revision/version values 284 */ 285 286enum ath5k_srev_type { 287 AR5K_VERSION_MAC, 288 AR5K_VERSION_RAD, 289}; 290 291struct ath5k_srev_name { 292 const char *sr_name; 293 enum ath5k_srev_type sr_type; 294 u_int sr_val; 295}; 296 297#define AR5K_SREV_UNKNOWN 0xffff 298 299#define AR5K_SREV_AR5210 0x00 /* Crete */ 300#define AR5K_SREV_AR5311 0x10 /* Maui 1 */ 301#define AR5K_SREV_AR5311A 0x20 /* Maui 2 */ 302#define AR5K_SREV_AR5311B 0x30 /* Spirit */ 303#define AR5K_SREV_AR5211 0x40 /* Oahu */ 304#define AR5K_SREV_AR5212 0x50 /* Venice */ 305#define AR5K_SREV_AR5212_V4 0x54 /* ??? */ 306#define AR5K_SREV_AR5213 0x55 /* ??? */ 307#define AR5K_SREV_AR5213A 0x59 /* Hainan */ 308#define AR5K_SREV_AR2413 0x78 /* Griffin lite */ 309#define AR5K_SREV_AR2414 0x70 /* Griffin */ 310#define AR5K_SREV_AR5424 0x90 /* Condor */ 311#define AR5K_SREV_AR5413 0xa4 /* Eagle lite */ 312#define AR5K_SREV_AR5414 0xa0 /* Eagle */ 313#define AR5K_SREV_AR2415 0xb0 /* Talon */ 314#define AR5K_SREV_AR5416 0xc0 /* PCI-E */ 315#define AR5K_SREV_AR5418 0xca /* PCI-E */ 316#define AR5K_SREV_AR2425 0xe0 /* Swan */ 317#define AR5K_SREV_AR2417 0xf0 /* Nala */ 318 319#define AR5K_SREV_RAD_5110 0x00 320#define AR5K_SREV_RAD_5111 0x10 321#define AR5K_SREV_RAD_5111A 0x15 322#define AR5K_SREV_RAD_2111 0x20 323#define AR5K_SREV_RAD_5112 0x30 324#define AR5K_SREV_RAD_5112A 0x35 325#define AR5K_SREV_RAD_5112B 0x36 326#define AR5K_SREV_RAD_2112 0x40 327#define AR5K_SREV_RAD_2112A 0x45 328#define AR5K_SREV_RAD_2112B 0x46 329#define AR5K_SREV_RAD_2413 0x50 330#define AR5K_SREV_RAD_5413 0x60 331#define AR5K_SREV_RAD_2316 0x70 /* Cobra SoC */ 332#define AR5K_SREV_RAD_2317 0x80 333#define AR5K_SREV_RAD_5424 0xa0 /* Mostly same as 5413 */ 334#define AR5K_SREV_RAD_2425 0xa2 335#define AR5K_SREV_RAD_5133 0xc0 336 337#define AR5K_SREV_PHY_5211 0x30 338#define AR5K_SREV_PHY_5212 0x41 339#define AR5K_SREV_PHY_5212A 0x42 340#define AR5K_SREV_PHY_5212B 0x43 341#define AR5K_SREV_PHY_2413 0x45 342#define AR5K_SREV_PHY_5413 0x61 343#define AR5K_SREV_PHY_2425 0x70 344 345/* IEEE defs */ 346#define IEEE80211_MAX_LEN 2500 347 348/* TODO add support to mac80211 for vendor-specific rates and modes */ 349 350/* 351 * Some of this information is based on Documentation from: 352 * 353 * http://madwifi.org/wiki/ChipsetFeatures/SuperAG 354 * 355 * Modulation for Atheros' eXtended Range - range enhancing extension that is 356 * supposed to double the distance an Atheros client device can keep a 357 * connection with an Atheros access point. This is achieved by increasing 358 * the receiver sensitivity up to, -105dBm, which is about 20dB above what 359 * the 802.11 specifications demand. In addition, new (proprietary) data rates 360 * are introduced: 3, 2, 1, 0.5 and 0.25 MBit/s. 361 * 362 * Please note that can you either use XR or TURBO but you cannot use both, 363 * they are exclusive. 364 * 365 */ 366#define MODULATION_XR 0x00000200 367/* 368 * Modulation for Atheros' Turbo G and Turbo A, its supposed to provide a 369 * throughput transmission speed up to 40Mbit/s-60Mbit/s at a 108Mbit/s 370 * signaling rate achieved through the bonding of two 54Mbit/s 802.11g 371 * channels. To use this feature your Access Point must also suport it. 372 * There is also a distinction between "static" and "dynamic" turbo modes: 373 * 374 * - Static: is the dumb version: devices set to this mode stick to it until 375 * the mode is turned off. 376 * - Dynamic: is the intelligent version, the network decides itself if it 377 * is ok to use turbo. As soon as traffic is detected on adjacent channels 378 * (which would get used in turbo mode), or when a non-turbo station joins 379 * the network, turbo mode won't be used until the situation changes again. 380 * Dynamic mode is achieved by Atheros' Adaptive Radio (AR) feature which 381 * monitors the used radio band in order to decide whether turbo mode may 382 * be used or not. 383 * 384 * This article claims Super G sticks to bonding of channels 5 and 6 for 385 * USA: 386 * 387 * http://www.pcworld.com/article/id,113428-page,1/article.html 388 * 389 * The channel bonding seems to be driver specific though. In addition to 390 * deciding what channels will be used, these "Turbo" modes are accomplished 391 * by also enabling the following features: 392 * 393 * - Bursting: allows multiple frames to be sent at once, rather than pausing 394 * after each frame. Bursting is a standards-compliant feature that can be 395 * used with any Access Point. 396 * - Fast frames: increases the amount of information that can be sent per 397 * frame, also resulting in a reduction of transmission overhead. It is a 398 * proprietary feature that needs to be supported by the Access Point. 399 * - Compression: data frames are compressed in real time using a Lempel Ziv 400 * algorithm. This is done transparently. Once this feature is enabled, 401 * compression and decompression takes place inside the chipset, without 402 * putting additional load on the host CPU. 403 * 404 */ 405#define MODULATION_TURBO 0x00000080 406 407enum ath5k_driver_mode { 408 AR5K_MODE_11A = 0, 409 AR5K_MODE_11A_TURBO = 1, 410 AR5K_MODE_11B = 2, 411 AR5K_MODE_11G = 3, 412 AR5K_MODE_11G_TURBO = 4, 413 AR5K_MODE_XR = 0, 414 AR5K_MODE_MAX = 5 415}; 416 417enum ath5k_ant_mode { 418 AR5K_ANTMODE_DEFAULT = 0, /* default antenna setup */ 419 AR5K_ANTMODE_FIXED_A = 1, /* only antenna A is present */ 420 AR5K_ANTMODE_FIXED_B = 2, /* only antenna B is present */ 421 AR5K_ANTMODE_SINGLE_AP = 3, /* sta locked on a single ap */ 422 AR5K_ANTMODE_SECTOR_AP = 4, /* AP with tx antenna set on tx desc */ 423 AR5K_ANTMODE_SECTOR_STA = 5, /* STA with tx antenna set on tx desc */ 424 AR5K_ANTMODE_DEBUG = 6, /* Debug mode -A -> Rx, B-> Tx- */ 425 AR5K_ANTMODE_MAX, 426}; 427 428 429/****************\ 430 TX DEFINITIONS 431\****************/ 432 433/* 434 * TX Status descriptor 435 */ 436struct ath5k_tx_status { 437 u16 ts_seqnum; 438 u16 ts_tstamp; 439 u8 ts_status; 440 u8 ts_rate[4]; 441 u8 ts_retry[4]; 442 u8 ts_final_idx; 443 s8 ts_rssi; 444 u8 ts_shortretry; 445 u8 ts_longretry; 446 u8 ts_virtcol; 447 u8 ts_antenna; 448}; 449 450#define AR5K_TXSTAT_ALTRATE 0x80 451#define AR5K_TXERR_XRETRY 0x01 452#define AR5K_TXERR_FILT 0x02 453#define AR5K_TXERR_FIFO 0x04 454 455/** 456 * enum ath5k_tx_queue - Queue types used to classify tx queues. 457 * @AR5K_TX_QUEUE_INACTIVE: q is unused -- see ath5k_hw_release_tx_queue 458 * @AR5K_TX_QUEUE_DATA: A normal data queue 459 * @AR5K_TX_QUEUE_XR_DATA: An XR-data queue 460 * @AR5K_TX_QUEUE_BEACON: The beacon queue 461 * @AR5K_TX_QUEUE_CAB: The after-beacon queue 462 * @AR5K_TX_QUEUE_UAPSD: Unscheduled Automatic Power Save Delivery queue 463 */ 464enum ath5k_tx_queue { 465 AR5K_TX_QUEUE_INACTIVE = 0, 466 AR5K_TX_QUEUE_DATA, 467 AR5K_TX_QUEUE_XR_DATA, 468 AR5K_TX_QUEUE_BEACON, 469 AR5K_TX_QUEUE_CAB, 470 AR5K_TX_QUEUE_UAPSD, 471}; 472 473#define AR5K_NUM_TX_QUEUES 10 474#define AR5K_NUM_TX_QUEUES_NOQCU 2 475 476/* 477 * Queue syb-types to classify normal data queues. 478 * These are the 4 Access Categories as defined in 479 * WME spec. 0 is the lowest priority and 4 is the 480 * highest. Normal data that hasn't been classified 481 * goes to the Best Effort AC. 482 */ 483enum ath5k_tx_queue_subtype { 484 AR5K_WME_AC_BK = 0, /*Background traffic*/ 485 AR5K_WME_AC_BE, /*Best-effort (normal) traffic)*/ 486 AR5K_WME_AC_VI, /*Video traffic*/ 487 AR5K_WME_AC_VO, /*Voice traffic*/ 488}; 489 490/* 491 * Queue ID numbers as returned by the hw functions, each number 492 * represents a hw queue. If hw does not support hw queues 493 * (eg 5210) all data goes in one queue. These match 494 * d80211 definitions (net80211/MadWiFi don't use them). 495 */ 496enum ath5k_tx_queue_id { 497 AR5K_TX_QUEUE_ID_NOQCU_DATA = 0, 498 AR5K_TX_QUEUE_ID_NOQCU_BEACON = 1, 499 AR5K_TX_QUEUE_ID_DATA_MIN = 0, /*IEEE80211_TX_QUEUE_DATA0*/ 500 AR5K_TX_QUEUE_ID_DATA_MAX = 4, /*IEEE80211_TX_QUEUE_DATA4*/ 501 AR5K_TX_QUEUE_ID_DATA_SVP = 5, /*IEEE80211_TX_QUEUE_SVP - Spectralink Voice Protocol*/ 502 AR5K_TX_QUEUE_ID_CAB = 6, /*IEEE80211_TX_QUEUE_AFTER_BEACON*/ 503 AR5K_TX_QUEUE_ID_BEACON = 7, /*IEEE80211_TX_QUEUE_BEACON*/ 504 AR5K_TX_QUEUE_ID_UAPSD = 8, 505 AR5K_TX_QUEUE_ID_XR_DATA = 9, 506}; 507 508/* 509 * Flags to set hw queue's parameters... 510 */ 511#define AR5K_TXQ_FLAG_TXOKINT_ENABLE 0x0001 /* Enable TXOK interrupt */ 512#define AR5K_TXQ_FLAG_TXERRINT_ENABLE 0x0002 /* Enable TXERR interrupt */ 513#define AR5K_TXQ_FLAG_TXEOLINT_ENABLE 0x0004 /* Enable TXEOL interrupt -not used- */ 514#define AR5K_TXQ_FLAG_TXDESCINT_ENABLE 0x0008 /* Enable TXDESC interrupt -not used- */ 515#define AR5K_TXQ_FLAG_TXURNINT_ENABLE 0x0010 /* Enable TXURN interrupt */ 516#define AR5K_TXQ_FLAG_CBRORNINT_ENABLE 0x0020 /* Enable CBRORN interrupt */ 517#define AR5K_TXQ_FLAG_CBRURNINT_ENABLE 0x0040 /* Enable CBRURN interrupt */ 518#define AR5K_TXQ_FLAG_QTRIGINT_ENABLE 0x0080 /* Enable QTRIG interrupt */ 519#define AR5K_TXQ_FLAG_TXNOFRMINT_ENABLE 0x0100 /* Enable TXNOFRM interrupt */ 520#define AR5K_TXQ_FLAG_BACKOFF_DISABLE 0x0200 /* Disable random post-backoff */ 521#define AR5K_TXQ_FLAG_RDYTIME_EXP_POLICY_ENABLE 0x0300 /* Enable ready time expiry policy (?)*/ 522#define AR5K_TXQ_FLAG_FRAG_BURST_BACKOFF_ENABLE 0x0800 /* Enable backoff while bursting */ 523#define AR5K_TXQ_FLAG_POST_FR_BKOFF_DIS 0x1000 /* Disable backoff while bursting */ 524#define AR5K_TXQ_FLAG_COMPRESSION_ENABLE 0x2000 /* Enable hw compression -not implemented-*/ 525 526/* 527 * A struct to hold tx queue's parameters 528 */ 529struct ath5k_txq_info { 530 enum ath5k_tx_queue tqi_type; 531 enum ath5k_tx_queue_subtype tqi_subtype; 532 u16 tqi_flags; /* Tx queue flags (see above) */ 533 u32 tqi_aifs; /* Arbitrated Interframe Space */ 534 s32 tqi_cw_min; /* Minimum Contention Window */ 535 s32 tqi_cw_max; /* Maximum Contention Window */ 536 u32 tqi_cbr_period; /* Constant bit rate period */ 537 u32 tqi_cbr_overflow_limit; 538 u32 tqi_burst_time; 539 u32 tqi_ready_time; /* Time queue waits after an event */ 540}; 541 542/* 543 * Transmit packet types. 544 * used on tx control descriptor 545 */ 546enum ath5k_pkt_type { 547 AR5K_PKT_TYPE_NORMAL = 0, 548 AR5K_PKT_TYPE_ATIM = 1, 549 AR5K_PKT_TYPE_PSPOLL = 2, 550 AR5K_PKT_TYPE_BEACON = 3, 551 AR5K_PKT_TYPE_PROBE_RESP = 4, 552 AR5K_PKT_TYPE_PIFS = 5, 553}; 554 555/* 556 * TX power and TPC settings 557 */ 558#define AR5K_TXPOWER_OFDM(_r, _v) ( \ 559 ((0 & 1) << ((_v) + 6)) | \ 560 (((ah->ah_txpower.txp_rates_power_table[(_r)]) & 0x3f) << (_v)) \ 561) 562 563#define AR5K_TXPOWER_CCK(_r, _v) ( \ 564 (ah->ah_txpower.txp_rates_power_table[(_r)] & 0x3f) << (_v) \ 565) 566 567/* 568 * DMA size definitions (2^n+2) 569 */ 570enum ath5k_dmasize { 571 AR5K_DMASIZE_4B = 0, 572 AR5K_DMASIZE_8B, 573 AR5K_DMASIZE_16B, 574 AR5K_DMASIZE_32B, 575 AR5K_DMASIZE_64B, 576 AR5K_DMASIZE_128B, 577 AR5K_DMASIZE_256B, 578 AR5K_DMASIZE_512B 579}; 580 581 582/****************\ 583 RX DEFINITIONS 584\****************/ 585 586/* 587 * RX Status descriptor 588 */ 589struct ath5k_rx_status { 590 u16 rs_datalen; 591 u16 rs_tstamp; 592 u8 rs_status; 593 u8 rs_phyerr; 594 s8 rs_rssi; 595 u8 rs_keyix; 596 u8 rs_rate; 597 u8 rs_antenna; 598 u8 rs_more; 599}; 600 601#define AR5K_RXERR_CRC 0x01 602#define AR5K_RXERR_PHY 0x02 603#define AR5K_RXERR_FIFO 0x04 604#define AR5K_RXERR_DECRYPT 0x08 605#define AR5K_RXERR_MIC 0x10 606#define AR5K_RXKEYIX_INVALID ((u8) - 1) 607#define AR5K_TXKEYIX_INVALID ((u32) - 1) 608 609 610/**************************\ 611 BEACON TIMERS DEFINITIONS 612\**************************/ 613 614#define AR5K_BEACON_PERIOD 0x0000ffff 615#define AR5K_BEACON_ENA 0x00800000 /*enable beacon xmit*/ 616#define AR5K_BEACON_RESET_TSF 0x01000000 /*force a TSF reset*/ 617 618 619/* 620 * TSF to TU conversion: 621 * 622 * TSF is a 64bit value in usec (microseconds). 623 * TU is a 32bit value and defined by IEEE802.11 (page 6) as "A measurement of 624 * time equal to 1024 usec", so it's roughly milliseconds (usec / 1024). 625 */ 626#define TSF_TO_TU(_tsf) (u32)((_tsf) >> 10) 627 628 629/*******************************\ 630 GAIN OPTIMIZATION DEFINITIONS 631\*******************************/ 632 633enum ath5k_rfgain { 634 AR5K_RFGAIN_INACTIVE = 0, 635 AR5K_RFGAIN_ACTIVE, 636 AR5K_RFGAIN_READ_REQUESTED, 637 AR5K_RFGAIN_NEED_CHANGE, 638}; 639 640struct ath5k_gain { 641 u8 g_step_idx; 642 u8 g_current; 643 u8 g_target; 644 u8 g_low; 645 u8 g_high; 646 u8 g_f_corr; 647 u8 g_state; 648}; 649 650/********************\ 651 COMMON DEFINITIONS 652\********************/ 653 654#define AR5K_SLOT_TIME_9 396 655#define AR5K_SLOT_TIME_20 880 656#define AR5K_SLOT_TIME_MAX 0xffff 657 658/* channel_flags */ 659#define CHANNEL_CW_INT 0x0008 /* Contention Window interference detected */ 660#define CHANNEL_TURBO 0x0010 /* Turbo Channel */ 661#define CHANNEL_CCK 0x0020 /* CCK channel */ 662#define CHANNEL_OFDM 0x0040 /* OFDM channel */ 663#define CHANNEL_2GHZ 0x0080 /* 2GHz channel. */ 664#define CHANNEL_5GHZ 0x0100 /* 5GHz channel */ 665#define CHANNEL_PASSIVE 0x0200 /* Only passive scan allowed */ 666#define CHANNEL_DYN 0x0400 /* Dynamic CCK-OFDM channel (for g operation) */ 667#define CHANNEL_XR 0x0800 /* XR channel */ 668 669#define CHANNEL_A (CHANNEL_5GHZ|CHANNEL_OFDM) 670#define CHANNEL_B (CHANNEL_2GHZ|CHANNEL_CCK) 671#define CHANNEL_G (CHANNEL_2GHZ|CHANNEL_OFDM) 672#define CHANNEL_T (CHANNEL_5GHZ|CHANNEL_OFDM|CHANNEL_TURBO) 673#define CHANNEL_TG (CHANNEL_2GHZ|CHANNEL_OFDM|CHANNEL_TURBO) 674#define CHANNEL_108A CHANNEL_T 675#define CHANNEL_108G CHANNEL_TG 676#define CHANNEL_X (CHANNEL_5GHZ|CHANNEL_OFDM|CHANNEL_XR) 677 678#define CHANNEL_ALL (CHANNEL_OFDM|CHANNEL_CCK|CHANNEL_2GHZ|CHANNEL_5GHZ| \ 679 CHANNEL_TURBO) 680 681#define CHANNEL_ALL_NOTURBO (CHANNEL_ALL & ~CHANNEL_TURBO) 682#define CHANNEL_MODES CHANNEL_ALL 683 684/* 685 * Used internaly for reset_tx_queue). 686 * Also see struct struct ieee80211_channel. 687 */ 688#define IS_CHAN_XR(_c) ((_c->hw_value & CHANNEL_XR) != 0) 689#define IS_CHAN_B(_c) ((_c->hw_value & CHANNEL_B) != 0) 690 691/* 692 * The following structure is used to map 2GHz channels to 693 * 5GHz Atheros channels. 694 * TODO: Clean up 695 */ 696struct ath5k_athchan_2ghz { 697 u32 a2_flags; 698 u16 a2_athchan; 699}; 700 701 702/******************\ 703 RATE DEFINITIONS 704\******************/ 705 706/** 707 * Seems the ar5xxx harware supports up to 32 rates, indexed by 1-32. 708 * 709 * The rate code is used to get the RX rate or set the TX rate on the 710 * hardware descriptors. It is also used for internal modulation control 711 * and settings. 712 * 713 * This is the hardware rate map we are aware of: 714 * 715 * rate_code 0x01 0x02 0x03 0x04 0x05 0x06 0x07 0x08 716 * rate_kbps 3000 1000 ? ? ? 2000 500 48000 717 * 718 * rate_code 0x09 0x0A 0x0B 0x0C 0x0D 0x0E 0x0F 0x10 719 * rate_kbps 24000 12000 6000 54000 36000 18000 9000 ? 720 * 721 * rate_code 17 18 19 20 21 22 23 24 722 * rate_kbps ? ? ? ? ? ? ? 11000 723 * 724 * rate_code 25 26 27 28 29 30 31 32 725 * rate_kbps 5500 2000 1000 11000S 5500S 2000S ? ? 726 * 727 * "S" indicates CCK rates with short preamble. 728 * 729 * AR5211 has different rate codes for CCK (802.11B) rates. It only uses the 730 * lowest 4 bits, so they are the same as below with a 0xF mask. 731 * (0xB, 0xA, 0x9 and 0x8 for 1M, 2M, 5.5M and 11M). 732 * We handle this in ath5k_setup_bands(). 733 */ 734#define AR5K_MAX_RATES 32 735 736/* B */ 737#define ATH5K_RATE_CODE_1M 0x1B 738#define ATH5K_RATE_CODE_2M 0x1A 739#define ATH5K_RATE_CODE_5_5M 0x19 740#define ATH5K_RATE_CODE_11M 0x18 741/* A and G */ 742#define ATH5K_RATE_CODE_6M 0x0B 743#define ATH5K_RATE_CODE_9M 0x0F 744#define ATH5K_RATE_CODE_12M 0x0A 745#define ATH5K_RATE_CODE_18M 0x0E 746#define ATH5K_RATE_CODE_24M 0x09 747#define ATH5K_RATE_CODE_36M 0x0D 748#define ATH5K_RATE_CODE_48M 0x08 749#define ATH5K_RATE_CODE_54M 0x0C 750/* XR */ 751#define ATH5K_RATE_CODE_XR_500K 0x07 752#define ATH5K_RATE_CODE_XR_1M 0x02 753#define ATH5K_RATE_CODE_XR_2M 0x06 754#define ATH5K_RATE_CODE_XR_3M 0x01 755 756/* adding this flag to rate_code enables short preamble */ 757#define AR5K_SET_SHORT_PREAMBLE 0x04 758 759/* 760 * Crypto definitions 761 */ 762 763#define AR5K_KEYCACHE_SIZE 8 764 765/***********************\ 766 HW RELATED DEFINITIONS 767\***********************/ 768 769/* 770 * Misc definitions 771 */ 772#define AR5K_RSSI_EP_MULTIPLIER (1<<7) 773 774#define AR5K_ASSERT_ENTRY(_e, _s) do { \ 775 if (_e >= _s) \ 776 return (false); \ 777} while (0) 778 779/* 780 * Hardware interrupt abstraction 781 */ 782 783/** 784 * enum ath5k_int - Hardware interrupt masks helpers 785 * 786 * @AR5K_INT_RX: mask to identify received frame interrupts, of type 787 * AR5K_ISR_RXOK or AR5K_ISR_RXERR 788 * @AR5K_INT_RXDESC: Request RX descriptor/Read RX descriptor (?) 789 * @AR5K_INT_RXNOFRM: No frame received (?) 790 * @AR5K_INT_RXEOL: received End Of List for VEOL (Virtual End Of List). The 791 * Queue Control Unit (QCU) signals an EOL interrupt only if a descriptor's 792 * LinkPtr is NULL. For more details, refer to: 793 * http://www.freepatentsonline.com/20030225739.html 794 * @AR5K_INT_RXORN: Indicates we got RX overrun (eg. no more descriptors). 795 * Note that Rx overrun is not always fatal, on some chips we can continue 796 * operation without reseting the card, that's why int_fatal is not 797 * common for all chips. 798 * @AR5K_INT_TX: mask to identify received frame interrupts, of type 799 * AR5K_ISR_TXOK or AR5K_ISR_TXERR 800 * @AR5K_INT_TXDESC: Request TX descriptor/Read TX status descriptor (?) 801 * @AR5K_INT_TXURN: received when we should increase the TX trigger threshold 802 * We currently do increments on interrupt by 803 * (AR5K_TUNE_MAX_TX_FIFO_THRES - current_trigger_level) / 2 804 * @AR5K_INT_MIB: Indicates the either Management Information Base counters or 805 * one of the PHY error counters reached the maximum value and should be 806 * read and cleared. 807 * @AR5K_INT_RXPHY: RX PHY Error 808 * @AR5K_INT_RXKCM: RX Key cache miss 809 * @AR5K_INT_SWBA: SoftWare Beacon Alert - indicates its time to send a 810 * beacon that must be handled in software. The alternative is if you 811 * have VEOL support, in that case you let the hardware deal with things. 812 * @AR5K_INT_BMISS: If in STA mode this indicates we have stopped seeing 813 * beacons from the AP have associated with, we should probably try to 814 * reassociate. When in IBSS mode this might mean we have not received 815 * any beacons from any local stations. Note that every station in an 816 * IBSS schedules to send beacons at the Target Beacon Transmission Time 817 * (TBTT) with a random backoff. 818 * @AR5K_INT_BNR: Beacon Not Ready interrupt - ?? 819 * @AR5K_INT_GPIO: GPIO interrupt is used for RF Kill, disabled for now 820 * until properly handled 821 * @AR5K_INT_FATAL: Fatal errors were encountered, typically caused by DMA 822 * errors. These types of errors we can enable seem to be of type 823 * AR5K_SIMR2_MCABT, AR5K_SIMR2_SSERR and AR5K_SIMR2_DPERR. 824 * @AR5K_INT_GLOBAL: Used to clear and set the IER 825 * @AR5K_INT_NOCARD: signals the card has been removed 826 * @AR5K_INT_COMMON: common interrupts shared amogst MACs with the same 827 * bit value 828 * 829 * These are mapped to take advantage of some common bits 830 * between the MACs, to be able to set intr properties 831 * easier. Some of them are not used yet inside hw.c. Most map 832 * to the respective hw interrupt value as they are common amogst different 833 * MACs. 834 */ 835enum ath5k_int { 836 AR5K_INT_RXOK = 0x00000001, 837 AR5K_INT_RXDESC = 0x00000002, 838 AR5K_INT_RXERR = 0x00000004, 839 AR5K_INT_RXNOFRM = 0x00000008, 840 AR5K_INT_RXEOL = 0x00000010, 841 AR5K_INT_RXORN = 0x00000020, 842 AR5K_INT_TXOK = 0x00000040, 843 AR5K_INT_TXDESC = 0x00000080, 844 AR5K_INT_TXERR = 0x00000100, 845 AR5K_INT_TXNOFRM = 0x00000200, 846 AR5K_INT_TXEOL = 0x00000400, 847 AR5K_INT_TXURN = 0x00000800, 848 AR5K_INT_MIB = 0x00001000, 849 AR5K_INT_SWI = 0x00002000, 850 AR5K_INT_RXPHY = 0x00004000, 851 AR5K_INT_RXKCM = 0x00008000, 852 AR5K_INT_SWBA = 0x00010000, 853 AR5K_INT_BRSSI = 0x00020000, 854 AR5K_INT_BMISS = 0x00040000, 855 AR5K_INT_FATAL = 0x00080000, /* Non common */ 856 AR5K_INT_BNR = 0x00100000, /* Non common */ 857 AR5K_INT_TIM = 0x00200000, /* Non common */ 858 AR5K_INT_DTIM = 0x00400000, /* Non common */ 859 AR5K_INT_DTIM_SYNC = 0x00800000, /* Non common */ 860 AR5K_INT_GPIO = 0x01000000, 861 AR5K_INT_BCN_TIMEOUT = 0x02000000, /* Non common */ 862 AR5K_INT_CAB_TIMEOUT = 0x04000000, /* Non common */ 863 AR5K_INT_RX_DOPPLER = 0x08000000, /* Non common */ 864 AR5K_INT_QCBRORN = 0x10000000, /* Non common */ 865 AR5K_INT_QCBRURN = 0x20000000, /* Non common */ 866 AR5K_INT_QTRIG = 0x40000000, /* Non common */ 867 AR5K_INT_GLOBAL = 0x80000000, 868 869 AR5K_INT_COMMON = AR5K_INT_RXOK 870 | AR5K_INT_RXDESC 871 | AR5K_INT_RXERR 872 | AR5K_INT_RXNOFRM 873 | AR5K_INT_RXEOL 874 | AR5K_INT_RXORN 875 | AR5K_INT_TXOK 876 | AR5K_INT_TXDESC 877 | AR5K_INT_TXERR 878 | AR5K_INT_TXNOFRM 879 | AR5K_INT_TXEOL 880 | AR5K_INT_TXURN 881 | AR5K_INT_MIB 882 | AR5K_INT_SWI 883 | AR5K_INT_RXPHY 884 | AR5K_INT_RXKCM 885 | AR5K_INT_SWBA 886 | AR5K_INT_BRSSI 887 | AR5K_INT_BMISS 888 | AR5K_INT_GPIO 889 | AR5K_INT_GLOBAL, 890 891 AR5K_INT_NOCARD = 0xffffffff 892}; 893 894/* mask which calibration is active at the moment */ 895enum ath5k_calibration_mask { 896 AR5K_CALIBRATION_FULL = 0x01, 897 AR5K_CALIBRATION_SHORT = 0x02, 898 AR5K_CALIBRATION_ANI = 0x04, 899}; 900 901/* 902 * Power management 903 */ 904enum ath5k_power_mode { 905 AR5K_PM_UNDEFINED = 0, 906 AR5K_PM_AUTO, 907 AR5K_PM_AWAKE, 908 AR5K_PM_FULL_SLEEP, 909 AR5K_PM_NETWORK_SLEEP, 910}; 911 912/* 913 * These match net80211 definitions (not used in 914 * mac80211). 915 * TODO: Clean this up 916 */ 917#define AR5K_LED_INIT 0 /*IEEE80211_S_INIT*/ 918#define AR5K_LED_SCAN 1 /*IEEE80211_S_SCAN*/ 919#define AR5K_LED_AUTH 2 /*IEEE80211_S_AUTH*/ 920#define AR5K_LED_ASSOC 3 /*IEEE80211_S_ASSOC*/ 921#define AR5K_LED_RUN 4 /*IEEE80211_S_RUN*/ 922 923/* GPIO-controlled software LED */ 924#define AR5K_SOFTLED_PIN 0 925#define AR5K_SOFTLED_ON 0 926#define AR5K_SOFTLED_OFF 1 927 928/* 929 * Chipset capabilities -see ath5k_hw_get_capability- 930 * get_capability function is not yet fully implemented 931 * in ath5k so most of these don't work yet... 932 * TODO: Implement these & merge with _TUNE_ stuff above 933 */ 934enum ath5k_capability_type { 935 AR5K_CAP_REG_DMN = 0, /* Used to get current reg. domain id */ 936 AR5K_CAP_TKIP_MIC = 2, /* Can handle TKIP MIC in hardware */ 937 AR5K_CAP_TKIP_SPLIT = 3, /* TKIP uses split keys */ 938 AR5K_CAP_PHYCOUNTERS = 4, /* PHY error counters */ 939 AR5K_CAP_DIVERSITY = 5, /* Supports fast diversity */ 940 AR5K_CAP_NUM_TXQUEUES = 6, /* Used to get max number of hw txqueues */ 941 AR5K_CAP_VEOL = 7, /* Supports virtual EOL */ 942 AR5K_CAP_COMPRESSION = 8, /* Supports compression */ 943 AR5K_CAP_BURST = 9, /* Supports packet bursting */ 944 AR5K_CAP_FASTFRAME = 10, /* Supports fast frames */ 945 AR5K_CAP_TXPOW = 11, /* Used to get global tx power limit */ 946 AR5K_CAP_TPC = 12, /* Can do per-packet tx power control (needed for 802.11a) */ 947 AR5K_CAP_BSSIDMASK = 13, /* Supports bssid mask */ 948 AR5K_CAP_MCAST_KEYSRCH = 14, /* Supports multicast key search */ 949 AR5K_CAP_TSF_ADJUST = 15, /* Supports beacon tsf adjust */ 950 AR5K_CAP_XR = 16, /* Supports XR mode */ 951 AR5K_CAP_WME_TKIPMIC = 17, /* Supports TKIP MIC when using WMM */ 952 AR5K_CAP_CHAN_HALFRATE = 18, /* Supports half rate channels */ 953 AR5K_CAP_CHAN_QUARTERRATE = 19, /* Supports quarter rate channels */ 954 AR5K_CAP_RFSILENT = 20, /* Supports RFsilent */ 955}; 956 957 958/* XXX: we *may* move cap_range stuff to struct wiphy */ 959struct ath5k_capabilities { 960 /* 961 * Supported PHY modes 962 * (ie. CHANNEL_A, CHANNEL_B, ...) 963 */ 964 DECLARE_BITMAP(cap_mode, AR5K_MODE_MAX); 965 966 /* 967 * Frequency range (without regulation restrictions) 968 */ 969 struct { 970 u16 range_2ghz_min; 971 u16 range_2ghz_max; 972 u16 range_5ghz_min; 973 u16 range_5ghz_max; 974 } cap_range; 975 976 /* 977 * Values stored in the EEPROM (some of them...) 978 */ 979 struct ath5k_eeprom_info cap_eeprom; 980 981 /* 982 * Queue information 983 */ 984 struct { 985 u8 q_tx_num; 986 } cap_queues; 987 988 bool cap_has_phyerr_counters; 989}; 990 991/* size of noise floor history (keep it a power of two) */ 992#define ATH5K_NF_CAL_HIST_MAX 8 993struct ath5k_nfcal_hist 994{ 995 s16 index; /* current index into nfval */ 996 s16 nfval[ATH5K_NF_CAL_HIST_MAX]; /* last few noise floors */ 997}; 998 999/** 1000 * struct avg_val - Helper structure for average calculation 1001 * @avg: contains the actual average value 1002 * @avg_weight: is used internally during calculation to prevent rounding errors 1003 */ 1004struct ath5k_avg_val { 1005 int avg; 1006 int avg_weight; 1007}; 1008 1009/***************************************\ 1010 HARDWARE ABSTRACTION LAYER STRUCTURE 1011\***************************************/ 1012 1013/* 1014 * Misc defines 1015 */ 1016 1017#define AR5K_MAX_GPIO 10 1018#define AR5K_MAX_RF_BANKS 8 1019 1020/* TODO: Clean up and merge with ath5k_softc */ 1021struct ath5k_hw { 1022 struct ath_common common; 1023 1024 struct ath5k_softc *ah_sc; 1025 void __iomem *ah_iobase; 1026 1027 enum ath5k_int ah_imr; 1028 1029 struct ieee80211_channel *ah_current_channel; 1030 bool ah_turbo; 1031 bool ah_calibration; 1032 bool ah_single_chip; 1033 bool ah_aes_support; 1034 bool ah_combined_mic; 1035 1036 enum ath5k_version ah_version; 1037 enum ath5k_radio ah_radio; 1038 u32 ah_phy; 1039 u32 ah_mac_srev; 1040 u16 ah_mac_version; 1041 u16 ah_phy_revision; 1042 u16 ah_radio_5ghz_revision; 1043 u16 ah_radio_2ghz_revision; 1044 1045#define ah_modes ah_capabilities.cap_mode 1046#define ah_ee_version ah_capabilities.cap_eeprom.ee_version 1047 1048 u32 ah_atim_window; 1049 u32 ah_aifs; 1050 u32 ah_cw_min; 1051 u32 ah_cw_max; 1052 u32 ah_limit_tx_retries; 1053 u8 ah_coverage_class; 1054 1055 /* Antenna Control */ 1056 u32 ah_ant_ctl[AR5K_EEPROM_N_MODES][AR5K_ANT_MAX]; 1057 u8 ah_ant_mode; 1058 u8 ah_tx_ant; 1059 u8 ah_def_ant; 1060 bool ah_software_retry; 1061 1062 struct ath5k_capabilities ah_capabilities; 1063 1064 struct ath5k_txq_info ah_txq[AR5K_NUM_TX_QUEUES]; 1065 u32 ah_txq_status; 1066 u32 ah_txq_imr_txok; 1067 u32 ah_txq_imr_txerr; 1068 u32 ah_txq_imr_txurn; 1069 u32 ah_txq_imr_txdesc; 1070 u32 ah_txq_imr_txeol; 1071 u32 ah_txq_imr_cbrorn; 1072 u32 ah_txq_imr_cbrurn; 1073 u32 ah_txq_imr_qtrig; 1074 u32 ah_txq_imr_nofrm; 1075 u32 ah_txq_isr; 1076 u32 *ah_rf_banks; 1077 size_t ah_rf_banks_size; 1078 size_t ah_rf_regs_count; 1079 struct ath5k_gain ah_gain; 1080 u8 ah_offset[AR5K_MAX_RF_BANKS]; 1081 1082 1083 struct { 1084 /* Temporary tables used for interpolation */ 1085 u8 tmpL[AR5K_EEPROM_N_PD_GAINS] 1086 [AR5K_EEPROM_POWER_TABLE_SIZE]; 1087 u8 tmpR[AR5K_EEPROM_N_PD_GAINS] 1088 [AR5K_EEPROM_POWER_TABLE_SIZE]; 1089 u8 txp_pd_table[AR5K_EEPROM_POWER_TABLE_SIZE * 2]; 1090 u16 txp_rates_power_table[AR5K_MAX_RATES]; 1091 u8 txp_min_idx; 1092 bool txp_tpc; 1093 /* Values in 0.25dB units */ 1094 s16 txp_min_pwr; 1095 s16 txp_max_pwr; 1096 /* Values in 0.5dB units */ 1097 s16 txp_offset; 1098 s16 txp_ofdm; 1099 s16 txp_cck_ofdm_gainf_delta; 1100 /* Value in dB units */ 1101 s16 txp_cck_ofdm_pwr_delta; 1102 } ah_txpower; 1103 1104 struct { 1105 bool r_enabled; 1106 int r_last_alert; 1107 struct ieee80211_channel r_last_channel; 1108 } ah_radar; 1109 1110 struct ath5k_nfcal_hist ah_nfcal_hist; 1111 1112 /* average beacon RSSI in our BSS (used by ANI) */ 1113 struct ath5k_avg_val ah_beacon_rssi_avg; 1114 1115 /* noise floor from last periodic calibration */ 1116 s32 ah_noise_floor; 1117 1118 /* Calibration timestamp */ 1119 unsigned long ah_cal_next_full; 1120 unsigned long ah_cal_next_ani; 1121 1122 /* Calibration mask */ 1123 u8 ah_cal_mask; 1124 1125 /* 1126 * Function pointers 1127 */ 1128 int (*ah_setup_rx_desc)(struct ath5k_hw *ah, struct ath5k_desc *desc, 1129 u32 size, unsigned int flags); 1130 int (*ah_setup_tx_desc)(struct ath5k_hw *, struct ath5k_desc *, 1131 unsigned int, unsigned int, int, enum ath5k_pkt_type, 1132 unsigned int, unsigned int, unsigned int, unsigned int, 1133 unsigned int, unsigned int, unsigned int, unsigned int); 1134 int (*ah_setup_mrr_tx_desc)(struct ath5k_hw *, struct ath5k_desc *, 1135 unsigned int, unsigned int, unsigned int, unsigned int, 1136 unsigned int, unsigned int); 1137 int (*ah_proc_tx_desc)(struct ath5k_hw *, struct ath5k_desc *, 1138 struct ath5k_tx_status *); 1139 int (*ah_proc_rx_desc)(struct ath5k_hw *, struct ath5k_desc *, 1140 struct ath5k_rx_status *); 1141}; 1142 1143/* 1144 * Prototypes 1145 */ 1146 1147/* Attach/Detach Functions */ 1148int ath5k_hw_attach(struct ath5k_softc *sc); 1149void ath5k_hw_detach(struct ath5k_hw *ah); 1150 1151/* LED functions */ 1152int ath5k_init_leds(struct ath5k_softc *sc); 1153void ath5k_led_enable(struct ath5k_softc *sc); 1154void ath5k_led_off(struct ath5k_softc *sc); 1155void ath5k_unregister_leds(struct ath5k_softc *sc); 1156 1157/* Reset Functions */ 1158int ath5k_hw_nic_wakeup(struct ath5k_hw *ah, int flags, bool initial); 1159int ath5k_hw_on_hold(struct ath5k_hw *ah); 1160int ath5k_hw_reset(struct ath5k_hw *ah, enum nl80211_iftype op_mode, 1161 struct ieee80211_channel *channel, bool change_channel); 1162int ath5k_hw_register_timeout(struct ath5k_hw *ah, u32 reg, u32 flag, u32 val, 1163 bool is_set); 1164/* Power management functions */ 1165 1166/* DMA Related Functions */ 1167void ath5k_hw_start_rx_dma(struct ath5k_hw *ah); 1168int ath5k_hw_stop_rx_dma(struct ath5k_hw *ah); 1169u32 ath5k_hw_get_rxdp(struct ath5k_hw *ah); 1170void ath5k_hw_set_rxdp(struct ath5k_hw *ah, u32 phys_addr); 1171int ath5k_hw_start_tx_dma(struct ath5k_hw *ah, unsigned int queue); 1172int ath5k_hw_stop_tx_dma(struct ath5k_hw *ah, unsigned int queue); 1173u32 ath5k_hw_get_txdp(struct ath5k_hw *ah, unsigned int queue); 1174int ath5k_hw_set_txdp(struct ath5k_hw *ah, unsigned int queue, 1175 u32 phys_addr); 1176int ath5k_hw_update_tx_triglevel(struct ath5k_hw *ah, bool increase); 1177/* Interrupt handling */ 1178bool ath5k_hw_is_intr_pending(struct ath5k_hw *ah); 1179int ath5k_hw_get_isr(struct ath5k_hw *ah, enum ath5k_int *interrupt_mask); 1180enum ath5k_int ath5k_hw_set_imr(struct ath5k_hw *ah, enum ath5k_int new_mask); 1181void ath5k_hw_update_mib_counters(struct ath5k_hw *ah); 1182 1183/* EEPROM access functions */ 1184int ath5k_eeprom_init(struct ath5k_hw *ah); 1185void ath5k_eeprom_detach(struct ath5k_hw *ah); 1186int ath5k_eeprom_read_mac(struct ath5k_hw *ah, u8 *mac); 1187 1188/* Protocol Control Unit Functions */ 1189extern int ath5k_hw_set_opmode(struct ath5k_hw *ah, enum nl80211_iftype opmode); 1190void ath5k_hw_set_coverage_class(struct ath5k_hw *ah, u8 coverage_class); 1191/* BSSID Functions */ 1192int ath5k_hw_set_lladdr(struct ath5k_hw *ah, const u8 *mac); 1193void ath5k_hw_set_associd(struct ath5k_hw *ah); 1194void ath5k_hw_set_bssid_mask(struct ath5k_hw *ah, const u8 *mask); 1195/* Receive start/stop functions */ 1196void ath5k_hw_start_rx_pcu(struct ath5k_hw *ah); 1197void ath5k_hw_stop_rx_pcu(struct ath5k_hw *ah); 1198/* RX Filter functions */ 1199void ath5k_hw_set_mcast_filter(struct ath5k_hw *ah, u32 filter0, u32 filter1); 1200u32 ath5k_hw_get_rx_filter(struct ath5k_hw *ah); 1201void ath5k_hw_set_rx_filter(struct ath5k_hw *ah, u32 filter); 1202/* Beacon control functions */ 1203u64 ath5k_hw_get_tsf64(struct ath5k_hw *ah); 1204void ath5k_hw_set_tsf64(struct ath5k_hw *ah, u64 tsf64); 1205void ath5k_hw_reset_tsf(struct ath5k_hw *ah); 1206void ath5k_hw_init_beacon(struct ath5k_hw *ah, u32 next_beacon, u32 interval); 1207/* ACK bit rate */ 1208void ath5k_hw_set_ack_bitrate_high(struct ath5k_hw *ah, bool high); 1209/* Clock rate related functions */ 1210unsigned int ath5k_hw_htoclock(struct ath5k_hw *ah, unsigned int usec); 1211unsigned int ath5k_hw_clocktoh(struct ath5k_hw *ah, unsigned int clock); 1212unsigned int ath5k_hw_get_clockrate(struct ath5k_hw *ah); 1213/* Key table (WEP) functions */ 1214int ath5k_hw_reset_key(struct ath5k_hw *ah, u16 entry); 1215int ath5k_hw_set_key(struct ath5k_hw *ah, u16 entry, 1216 const struct ieee80211_key_conf *key, const u8 *mac); 1217int ath5k_hw_set_key_lladdr(struct ath5k_hw *ah, u16 entry, const u8 *mac); 1218 1219/* Queue Control Unit, DFS Control Unit Functions */ 1220int ath5k_hw_get_tx_queueprops(struct ath5k_hw *ah, int queue, 1221 struct ath5k_txq_info *queue_info); 1222int ath5k_hw_set_tx_queueprops(struct ath5k_hw *ah, int queue, 1223 const struct ath5k_txq_info *queue_info); 1224int ath5k_hw_setup_tx_queue(struct ath5k_hw *ah, 1225 enum ath5k_tx_queue queue_type, 1226 struct ath5k_txq_info *queue_info); 1227u32 ath5k_hw_num_tx_pending(struct ath5k_hw *ah, unsigned int queue); 1228void ath5k_hw_release_tx_queue(struct ath5k_hw *ah, unsigned int queue); 1229int ath5k_hw_reset_tx_queue(struct ath5k_hw *ah, unsigned int queue); 1230int ath5k_hw_set_slot_time(struct ath5k_hw *ah, unsigned int slot_time); 1231 1232/* Hardware Descriptor Functions */ 1233int ath5k_hw_init_desc_functions(struct ath5k_hw *ah); 1234 1235/* GPIO Functions */ 1236void ath5k_hw_set_ledstate(struct ath5k_hw *ah, unsigned int state); 1237int ath5k_hw_set_gpio_input(struct ath5k_hw *ah, u32 gpio); 1238int ath5k_hw_set_gpio_output(struct ath5k_hw *ah, u32 gpio); 1239u32 ath5k_hw_get_gpio(struct ath5k_hw *ah, u32 gpio); 1240int ath5k_hw_set_gpio(struct ath5k_hw *ah, u32 gpio, u32 val); 1241void ath5k_hw_set_gpio_intr(struct ath5k_hw *ah, unsigned int gpio, 1242 u32 interrupt_level); 1243 1244/* rfkill Functions */ 1245void ath5k_rfkill_hw_start(struct ath5k_hw *ah); 1246void ath5k_rfkill_hw_stop(struct ath5k_hw *ah); 1247 1248/* Misc functions */ 1249int ath5k_hw_set_capabilities(struct ath5k_hw *ah); 1250int ath5k_hw_get_capability(struct ath5k_hw *ah, 1251 enum ath5k_capability_type cap_type, u32 capability, 1252 u32 *result); 1253int ath5k_hw_enable_pspoll(struct ath5k_hw *ah, u8 *bssid, u16 assoc_id); 1254int ath5k_hw_disable_pspoll(struct ath5k_hw *ah); 1255 1256/* Initial register settings functions */ 1257int ath5k_hw_write_initvals(struct ath5k_hw *ah, u8 mode, bool change_channel); 1258 1259/* Initialize RF */ 1260int ath5k_hw_rfregs_init(struct ath5k_hw *ah, 1261 struct ieee80211_channel *channel, 1262 unsigned int mode); 1263int ath5k_hw_rfgain_init(struct ath5k_hw *ah, unsigned int freq); 1264enum ath5k_rfgain ath5k_hw_gainf_calibrate(struct ath5k_hw *ah); 1265int ath5k_hw_rfgain_opt_init(struct ath5k_hw *ah); 1266/* PHY/RF channel functions */ 1267bool ath5k_channel_ok(struct ath5k_hw *ah, u16 freq, unsigned int flags); 1268int ath5k_hw_channel(struct ath5k_hw *ah, struct ieee80211_channel *channel); 1269/* PHY calibration */ 1270void ath5k_hw_init_nfcal_hist(struct ath5k_hw *ah); 1271int ath5k_hw_phy_calibrate(struct ath5k_hw *ah, 1272 struct ieee80211_channel *channel); 1273/* Spur mitigation */ 1274bool ath5k_hw_chan_has_spur_noise(struct ath5k_hw *ah, 1275 struct ieee80211_channel *channel); 1276void ath5k_hw_set_spur_mitigation_filter(struct ath5k_hw *ah, 1277 struct ieee80211_channel *channel); 1278/* Misc PHY functions */ 1279u16 ath5k_hw_radio_revision(struct ath5k_hw *ah, unsigned int chan); 1280int ath5k_hw_phy_disable(struct ath5k_hw *ah); 1281/* Antenna control */ 1282void ath5k_hw_set_antenna_mode(struct ath5k_hw *ah, u8 ant_mode); 1283/* TX power setup */ 1284int ath5k_hw_txpower(struct ath5k_hw *ah, struct ieee80211_channel *channel, 1285 u8 ee_mode, u8 txpower); 1286int ath5k_hw_set_txpower_limit(struct ath5k_hw *ah, u8 txpower); 1287 1288/* 1289 * Functions used internaly 1290 */ 1291 1292static inline struct ath_common *ath5k_hw_common(struct ath5k_hw *ah) 1293{ 1294 return &ah->common; 1295} 1296 1297static inline struct ath_regulatory *ath5k_hw_regulatory(struct ath5k_hw *ah) 1298{ 1299 return &(ath5k_hw_common(ah)->regulatory); 1300} 1301 1302static inline u32 ath5k_hw_reg_read(struct ath5k_hw *ah, u16 reg) 1303{ 1304 return ioread32(ah->ah_iobase + reg); 1305} 1306 1307static inline void ath5k_hw_reg_write(struct ath5k_hw *ah, u32 val, u16 reg) 1308{ 1309 iowrite32(val, ah->ah_iobase + reg); 1310} 1311 1312static inline u32 ath5k_hw_bitswap(u32 val, unsigned int bits) 1313{ 1314 u32 retval = 0, bit, i; 1315 1316 for (i = 0; i < bits; i++) { 1317 bit = (val >> i) & 1; 1318 retval = (retval << 1) | bit; 1319 } 1320 1321 return retval; 1322} 1323 1324#define AVG_SAMPLES 8 1325#define AVG_FACTOR 1000 1326 1327/** 1328 * ath5k_moving_average - Exponentially weighted moving average 1329 * @avg: average structure 1330 * @val: current value 1331 * 1332 * This implementation make use of a struct ath5k_avg_val to prevent rounding 1333 * errors. 1334 */ 1335static inline struct ath5k_avg_val 1336ath5k_moving_average(const struct ath5k_avg_val avg, const int val) 1337{ 1338 struct ath5k_avg_val new; 1339 new.avg_weight = avg.avg_weight ? 1340 (((avg.avg_weight * ((AVG_SAMPLES) - 1)) + 1341 (val * (AVG_FACTOR))) / (AVG_SAMPLES)) : 1342 (val * (AVG_FACTOR)); 1343 new.avg = new.avg_weight / (AVG_FACTOR); 1344 return new; 1345} 1346 1347#endif 1348