ath5k.h revision 987af54fa93b1c01eb3a85229bc93dfe77e6d2e1
1/* 2 * Copyright (c) 2004-2007 Reyk Floeter <reyk@openbsd.org> 3 * Copyright (c) 2006-2007 Nick Kossifidis <mickflemm@gmail.com> 4 * 5 * Permission to use, copy, modify, and distribute this software for any 6 * purpose with or without fee is hereby granted, provided that the above 7 * copyright notice and this permission notice appear in all copies. 8 * 9 * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES 10 * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF 11 * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR 12 * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES 13 * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN 14 * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF 15 * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. 16 */ 17 18#ifndef _ATH5K_H 19#define _ATH5K_H 20 21/* TODO: Clean up channel debugging (doesn't work anyway) and start 22 * working on reg. control code using all available eeprom information 23 * (rev. engineering needed) */ 24#define CHAN_DEBUG 0 25 26#include <linux/io.h> 27#include <linux/interrupt.h> 28#include <linux/types.h> 29#include <linux/average.h> 30#include <linux/leds.h> 31#include <net/mac80211.h> 32 33/* RX/TX descriptor hw structs 34 * TODO: Driver part should only see sw structs */ 35#include "desc.h" 36 37/* EEPROM structs/offsets 38 * TODO: Make a more generic struct (eg. add more stuff to ath5k_capabilities) 39 * and clean up common bits, then introduce set/get functions in eeprom.c */ 40#include "eeprom.h" 41#include "debug.h" 42#include "../ath.h" 43#include "ani.h" 44 45/* PCI IDs */ 46#define PCI_DEVICE_ID_ATHEROS_AR5210 0x0007 /* AR5210 */ 47#define PCI_DEVICE_ID_ATHEROS_AR5311 0x0011 /* AR5311 */ 48#define PCI_DEVICE_ID_ATHEROS_AR5211 0x0012 /* AR5211 */ 49#define PCI_DEVICE_ID_ATHEROS_AR5212 0x0013 /* AR5212 */ 50#define PCI_DEVICE_ID_3COM_3CRDAG675 0x0013 /* 3CRDAG675 (Atheros AR5212) */ 51#define PCI_DEVICE_ID_3COM_2_3CRPAG175 0x0013 /* 3CRPAG175 (Atheros AR5212) */ 52#define PCI_DEVICE_ID_ATHEROS_AR5210_AP 0x0207 /* AR5210 (Early) */ 53#define PCI_DEVICE_ID_ATHEROS_AR5212_IBM 0x1014 /* AR5212 (IBM MiniPCI) */ 54#define PCI_DEVICE_ID_ATHEROS_AR5210_DEFAULT 0x1107 /* AR5210 (no eeprom) */ 55#define PCI_DEVICE_ID_ATHEROS_AR5212_DEFAULT 0x1113 /* AR5212 (no eeprom) */ 56#define PCI_DEVICE_ID_ATHEROS_AR5211_DEFAULT 0x1112 /* AR5211 (no eeprom) */ 57#define PCI_DEVICE_ID_ATHEROS_AR5212_FPGA 0xf013 /* AR5212 (emulation board) */ 58#define PCI_DEVICE_ID_ATHEROS_AR5211_LEGACY 0xff12 /* AR5211 (emulation board) */ 59#define PCI_DEVICE_ID_ATHEROS_AR5211_FPGA11B 0xf11b /* AR5211 (emulation board) */ 60#define PCI_DEVICE_ID_ATHEROS_AR5312_REV2 0x0052 /* AR5312 WMAC (AP31) */ 61#define PCI_DEVICE_ID_ATHEROS_AR5312_REV7 0x0057 /* AR5312 WMAC (AP30-040) */ 62#define PCI_DEVICE_ID_ATHEROS_AR5312_REV8 0x0058 /* AR5312 WMAC (AP43-030) */ 63#define PCI_DEVICE_ID_ATHEROS_AR5212_0014 0x0014 /* AR5212 compatible */ 64#define PCI_DEVICE_ID_ATHEROS_AR5212_0015 0x0015 /* AR5212 compatible */ 65#define PCI_DEVICE_ID_ATHEROS_AR5212_0016 0x0016 /* AR5212 compatible */ 66#define PCI_DEVICE_ID_ATHEROS_AR5212_0017 0x0017 /* AR5212 compatible */ 67#define PCI_DEVICE_ID_ATHEROS_AR5212_0018 0x0018 /* AR5212 compatible */ 68#define PCI_DEVICE_ID_ATHEROS_AR5212_0019 0x0019 /* AR5212 compatible */ 69#define PCI_DEVICE_ID_ATHEROS_AR2413 0x001a /* AR2413 (Griffin-lite) */ 70#define PCI_DEVICE_ID_ATHEROS_AR5413 0x001b /* AR5413 (Eagle) */ 71#define PCI_DEVICE_ID_ATHEROS_AR5424 0x001c /* AR5424 (Condor PCI-E) */ 72#define PCI_DEVICE_ID_ATHEROS_AR5416 0x0023 /* AR5416 */ 73#define PCI_DEVICE_ID_ATHEROS_AR5418 0x0024 /* AR5418 */ 74 75/****************************\ 76 GENERIC DRIVER DEFINITIONS 77\****************************/ 78 79#define ATH5K_PRINTF(fmt, ...) \ 80 pr_warn("%s: " fmt, __func__, ##__VA_ARGS__) 81 82void __printf(3, 4) 83_ath5k_printk(const struct ath5k_hw *ah, const char *level, 84 const char *fmt, ...); 85 86#define ATH5K_PRINTK(_sc, _level, _fmt, ...) \ 87 _ath5k_printk(_sc, _level, _fmt, ##__VA_ARGS__) 88 89#define ATH5K_PRINTK_LIMIT(_sc, _level, _fmt, ...) \ 90do { \ 91 if (net_ratelimit()) \ 92 ATH5K_PRINTK(_sc, _level, _fmt, ##__VA_ARGS__); \ 93} while (0) 94 95#define ATH5K_INFO(_sc, _fmt, ...) \ 96 ATH5K_PRINTK(_sc, KERN_INFO, _fmt, ##__VA_ARGS__) 97 98#define ATH5K_WARN(_sc, _fmt, ...) \ 99 ATH5K_PRINTK_LIMIT(_sc, KERN_WARNING, _fmt, ##__VA_ARGS__) 100 101#define ATH5K_ERR(_sc, _fmt, ...) \ 102 ATH5K_PRINTK_LIMIT(_sc, KERN_ERR, _fmt, ##__VA_ARGS__) 103 104/* 105 * AR5K REGISTER ACCESS 106 */ 107 108/* Some macros to read/write fields */ 109 110/* First shift, then mask */ 111#define AR5K_REG_SM(_val, _flags) \ 112 (((_val) << _flags##_S) & (_flags)) 113 114/* First mask, then shift */ 115#define AR5K_REG_MS(_val, _flags) \ 116 (((_val) & (_flags)) >> _flags##_S) 117 118/* Some registers can hold multiple values of interest. For this 119 * reason when we want to write to these registers we must first 120 * retrieve the values which we do not want to clear (lets call this 121 * old_data) and then set the register with this and our new_value: 122 * ( old_data | new_value) */ 123#define AR5K_REG_WRITE_BITS(ah, _reg, _flags, _val) \ 124 ath5k_hw_reg_write(ah, (ath5k_hw_reg_read(ah, _reg) & ~(_flags)) | \ 125 (((_val) << _flags##_S) & (_flags)), _reg) 126 127#define AR5K_REG_MASKED_BITS(ah, _reg, _flags, _mask) \ 128 ath5k_hw_reg_write(ah, (ath5k_hw_reg_read(ah, _reg) & \ 129 (_mask)) | (_flags), _reg) 130 131#define AR5K_REG_ENABLE_BITS(ah, _reg, _flags) \ 132 ath5k_hw_reg_write(ah, ath5k_hw_reg_read(ah, _reg) | (_flags), _reg) 133 134#define AR5K_REG_DISABLE_BITS(ah, _reg, _flags) \ 135 ath5k_hw_reg_write(ah, ath5k_hw_reg_read(ah, _reg) & ~(_flags), _reg) 136 137/* Access QCU registers per queue */ 138#define AR5K_REG_READ_Q(ah, _reg, _queue) \ 139 (ath5k_hw_reg_read(ah, _reg) & (1 << _queue)) \ 140 141#define AR5K_REG_WRITE_Q(ah, _reg, _queue) \ 142 ath5k_hw_reg_write(ah, (1 << _queue), _reg) 143 144#define AR5K_Q_ENABLE_BITS(_reg, _queue) do { \ 145 _reg |= 1 << _queue; \ 146} while (0) 147 148#define AR5K_Q_DISABLE_BITS(_reg, _queue) do { \ 149 _reg &= ~(1 << _queue); \ 150} while (0) 151 152/* Used while writing initvals */ 153#define AR5K_REG_WAIT(_i) do { \ 154 if (_i % 64) \ 155 udelay(1); \ 156} while (0) 157 158/* 159 * Some tunable values (these should be changeable by the user) 160 * TODO: Make use of them and add more options OR use debug/configfs 161 */ 162#define AR5K_TUNE_DMA_BEACON_RESP 2 163#define AR5K_TUNE_SW_BEACON_RESP 10 164#define AR5K_TUNE_ADDITIONAL_SWBA_BACKOFF 0 165#define AR5K_TUNE_MIN_TX_FIFO_THRES 1 166#define AR5K_TUNE_MAX_TX_FIFO_THRES ((IEEE80211_MAX_FRAME_LEN / 64) + 1) 167#define AR5K_TUNE_REGISTER_TIMEOUT 20000 168/* Register for RSSI threshold has a mask of 0xff, so 255 seems to 169 * be the max value. */ 170#define AR5K_TUNE_RSSI_THRES 129 171/* This must be set when setting the RSSI threshold otherwise it can 172 * prevent a reset. If AR5K_RSSI_THR is read after writing to it 173 * the BMISS_THRES will be seen as 0, seems hardware doesn't keep 174 * track of it. Max value depends on hardware. For AR5210 this is just 7. 175 * For AR5211+ this seems to be up to 255. */ 176#define AR5K_TUNE_BMISS_THRES 7 177#define AR5K_TUNE_REGISTER_DWELL_TIME 20000 178#define AR5K_TUNE_BEACON_INTERVAL 100 179#define AR5K_TUNE_AIFS 2 180#define AR5K_TUNE_AIFS_11B 2 181#define AR5K_TUNE_AIFS_XR 0 182#define AR5K_TUNE_CWMIN 15 183#define AR5K_TUNE_CWMIN_11B 31 184#define AR5K_TUNE_CWMIN_XR 3 185#define AR5K_TUNE_CWMAX 1023 186#define AR5K_TUNE_CWMAX_11B 1023 187#define AR5K_TUNE_CWMAX_XR 7 188#define AR5K_TUNE_NOISE_FLOOR -72 189#define AR5K_TUNE_CCA_MAX_GOOD_VALUE -95 190#define AR5K_TUNE_MAX_TXPOWER 63 191#define AR5K_TUNE_DEFAULT_TXPOWER 25 192#define AR5K_TUNE_TPC_TXPOWER false 193#define ATH5K_TUNE_CALIBRATION_INTERVAL_FULL 60000 /* 60 sec */ 194#define ATH5K_TUNE_CALIBRATION_INTERVAL_SHORT 10000 /* 10 sec */ 195#define ATH5K_TUNE_CALIBRATION_INTERVAL_ANI 1000 /* 1 sec */ 196#define ATH5K_TX_COMPLETE_POLL_INT 3000 /* 3 sec */ 197 198#define AR5K_INIT_CARR_SENSE_EN 1 199 200/*Swap RX/TX Descriptor for big endian archs*/ 201#if defined(__BIG_ENDIAN) 202#define AR5K_INIT_CFG ( \ 203 AR5K_CFG_SWTD | AR5K_CFG_SWRD \ 204) 205#else 206#define AR5K_INIT_CFG 0x00000000 207#endif 208 209/* Initial values */ 210#define AR5K_INIT_CYCRSSI_THR1 2 211 212/* Tx retry limit defaults from standard */ 213#define AR5K_INIT_RETRY_SHORT 7 214#define AR5K_INIT_RETRY_LONG 4 215 216/* Slot time */ 217#define AR5K_INIT_SLOT_TIME_TURBO 6 218#define AR5K_INIT_SLOT_TIME_DEFAULT 9 219#define AR5K_INIT_SLOT_TIME_HALF_RATE 13 220#define AR5K_INIT_SLOT_TIME_QUARTER_RATE 21 221#define AR5K_INIT_SLOT_TIME_B 20 222#define AR5K_SLOT_TIME_MAX 0xffff 223 224/* SIFS */ 225#define AR5K_INIT_SIFS_TURBO 6 226#define AR5K_INIT_SIFS_DEFAULT_BG 10 227#define AR5K_INIT_SIFS_DEFAULT_A 16 228#define AR5K_INIT_SIFS_HALF_RATE 32 229#define AR5K_INIT_SIFS_QUARTER_RATE 64 230 231/* Used to calculate tx time for non 5/10/40MHz 232 * operation */ 233/* It's preamble time + signal time (16 + 4) */ 234#define AR5K_INIT_OFDM_PREAMPLE_TIME 20 235/* Preamble time for 40MHz (turbo) operation (min ?) */ 236#define AR5K_INIT_OFDM_PREAMBLE_TIME_MIN 14 237#define AR5K_INIT_OFDM_SYMBOL_TIME 4 238#define AR5K_INIT_OFDM_PLCP_BITS 22 239 240/* Rx latency for 5 and 10MHz operation (max ?) */ 241#define AR5K_INIT_RX_LAT_MAX 63 242/* Tx latencies from initvals (5212 only but no problem 243 * because we only tweak them on 5212) */ 244#define AR5K_INIT_TX_LAT_A 54 245#define AR5K_INIT_TX_LAT_BG 384 246/* Tx latency for 40MHz (turbo) operation (min ?) */ 247#define AR5K_INIT_TX_LAT_MIN 32 248/* Default Tx/Rx latencies (same for 5211)*/ 249#define AR5K_INIT_TX_LATENCY_5210 54 250#define AR5K_INIT_RX_LATENCY_5210 29 251 252/* Tx frame to Tx data start delay */ 253#define AR5K_INIT_TXF2TXD_START_DEFAULT 14 254#define AR5K_INIT_TXF2TXD_START_DELAY_10MHZ 12 255#define AR5K_INIT_TXF2TXD_START_DELAY_5MHZ 13 256 257/* We need to increase PHY switch and agc settling time 258 * on turbo mode */ 259#define AR5K_SWITCH_SETTLING 5760 260#define AR5K_SWITCH_SETTLING_TURBO 7168 261 262#define AR5K_AGC_SETTLING 28 263/* 38 on 5210 but shouldn't matter */ 264#define AR5K_AGC_SETTLING_TURBO 37 265 266 267 268/*****************************\ 269* GENERIC CHIPSET DEFINITIONS * 270\*****************************/ 271 272/** 273 * enum ath5k_version - MAC Chips 274 * @AR5K_AR5210: AR5210 (Crete) 275 * @AR5K_AR5211: AR5211 (Oahu/Maui) 276 * @AR5K_AR5212: AR5212 (Venice) and newer 277 */ 278enum ath5k_version { 279 AR5K_AR5210 = 0, 280 AR5K_AR5211 = 1, 281 AR5K_AR5212 = 2, 282}; 283 284/** 285 * enum ath5k_radio - PHY Chips 286 * @AR5K_RF5110: RF5110 (Fez) 287 * @AR5K_RF5111: RF5111 (Sombrero) 288 * @AR5K_RF5112: RF2112/5112(A) (Derby/Derby2) 289 * @AR5K_RF2413: RF2413/2414 (Griffin/Griffin-Lite) 290 * @AR5K_RF5413: RF5413/5414/5424 (Eagle/Condor) 291 * @AR5K_RF2316: RF2315/2316 (Cobra SoC) 292 * @AR5K_RF2317: RF2317 (Spider SoC) 293 * @AR5K_RF2425: RF2425/2417 (Swan/Nalla) 294 */ 295enum ath5k_radio { 296 AR5K_RF5110 = 0, 297 AR5K_RF5111 = 1, 298 AR5K_RF5112 = 2, 299 AR5K_RF2413 = 3, 300 AR5K_RF5413 = 4, 301 AR5K_RF2316 = 5, 302 AR5K_RF2317 = 6, 303 AR5K_RF2425 = 7, 304}; 305 306/* 307 * Common silicon revision/version values 308 */ 309 310#define AR5K_SREV_UNKNOWN 0xffff 311 312#define AR5K_SREV_AR5210 0x00 /* Crete */ 313#define AR5K_SREV_AR5311 0x10 /* Maui 1 */ 314#define AR5K_SREV_AR5311A 0x20 /* Maui 2 */ 315#define AR5K_SREV_AR5311B 0x30 /* Spirit */ 316#define AR5K_SREV_AR5211 0x40 /* Oahu */ 317#define AR5K_SREV_AR5212 0x50 /* Venice */ 318#define AR5K_SREV_AR5312_R2 0x52 /* AP31 */ 319#define AR5K_SREV_AR5212_V4 0x54 /* ??? */ 320#define AR5K_SREV_AR5213 0x55 /* ??? */ 321#define AR5K_SREV_AR5312_R7 0x57 /* AP30 */ 322#define AR5K_SREV_AR2313_R8 0x58 /* AP43 */ 323#define AR5K_SREV_AR5213A 0x59 /* Hainan */ 324#define AR5K_SREV_AR2413 0x78 /* Griffin lite */ 325#define AR5K_SREV_AR2414 0x70 /* Griffin */ 326#define AR5K_SREV_AR2315_R6 0x86 /* AP51-Light */ 327#define AR5K_SREV_AR2315_R7 0x87 /* AP51-Full */ 328#define AR5K_SREV_AR5424 0x90 /* Condor */ 329#define AR5K_SREV_AR2317_R1 0x90 /* AP61-Light */ 330#define AR5K_SREV_AR2317_R2 0x91 /* AP61-Full */ 331#define AR5K_SREV_AR5413 0xa4 /* Eagle lite */ 332#define AR5K_SREV_AR5414 0xa0 /* Eagle */ 333#define AR5K_SREV_AR2415 0xb0 /* Talon */ 334#define AR5K_SREV_AR5416 0xc0 /* PCI-E */ 335#define AR5K_SREV_AR5418 0xca /* PCI-E */ 336#define AR5K_SREV_AR2425 0xe0 /* Swan */ 337#define AR5K_SREV_AR2417 0xf0 /* Nala */ 338 339#define AR5K_SREV_RAD_5110 0x00 340#define AR5K_SREV_RAD_5111 0x10 341#define AR5K_SREV_RAD_5111A 0x15 342#define AR5K_SREV_RAD_2111 0x20 343#define AR5K_SREV_RAD_5112 0x30 344#define AR5K_SREV_RAD_5112A 0x35 345#define AR5K_SREV_RAD_5112B 0x36 346#define AR5K_SREV_RAD_2112 0x40 347#define AR5K_SREV_RAD_2112A 0x45 348#define AR5K_SREV_RAD_2112B 0x46 349#define AR5K_SREV_RAD_2413 0x50 350#define AR5K_SREV_RAD_5413 0x60 351#define AR5K_SREV_RAD_2316 0x70 /* Cobra SoC */ 352#define AR5K_SREV_RAD_2317 0x80 353#define AR5K_SREV_RAD_5424 0xa0 /* Mostly same as 5413 */ 354#define AR5K_SREV_RAD_2425 0xa2 355#define AR5K_SREV_RAD_5133 0xc0 356 357#define AR5K_SREV_PHY_5211 0x30 358#define AR5K_SREV_PHY_5212 0x41 359#define AR5K_SREV_PHY_5212A 0x42 360#define AR5K_SREV_PHY_5212B 0x43 361#define AR5K_SREV_PHY_2413 0x45 362#define AR5K_SREV_PHY_5413 0x61 363#define AR5K_SREV_PHY_2425 0x70 364 365/* TODO add support to mac80211 for vendor-specific rates and modes */ 366 367/** 368 * DOC: Atheros XR 369 * 370 * Some of this information is based on Documentation from: 371 * 372 * http://madwifi-project.org/wiki/ChipsetFeatures/SuperAG 373 * 374 * Atheros' eXtended Range - range enhancing extension is a modulation scheme 375 * that is supposed to double the link distance between an Atheros XR-enabled 376 * client device with an Atheros XR-enabled access point. This is achieved 377 * by increasing the receiver sensitivity up to, -105dBm, which is about 20dB 378 * above what the 802.11 specifications demand. In addition, new (proprietary) 379 * data rates are introduced: 3, 2, 1, 0.5 and 0.25 MBit/s. 380 * 381 * Please note that can you either use XR or TURBO but you cannot use both, 382 * they are exclusive. 383 * 384 * Also note that we do not plan to support XR mode at least for now. You can 385 * get a mode similar to XR by using 5MHz bwmode. 386 */ 387 388 389/** 390 * DOC: Atheros SuperAG 391 * 392 * In addition to XR we have another modulation scheme called TURBO mode 393 * that is supposed to provide a throughput transmission speed up to 40Mbit/s 394 * -60Mbit/s at a 108Mbit/s signaling rate achieved through the bonding of two 395 * 54Mbit/s 802.11g channels. To use this feature both ends must support it. 396 * There is also a distinction between "static" and "dynamic" turbo modes: 397 * 398 * - Static: is the dumb version: devices set to this mode stick to it until 399 * the mode is turned off. 400 * 401 * - Dynamic: is the intelligent version, the network decides itself if it 402 * is ok to use turbo. As soon as traffic is detected on adjacent channels 403 * (which would get used in turbo mode), or when a non-turbo station joins 404 * the network, turbo mode won't be used until the situation changes again. 405 * Dynamic mode is achieved by Atheros' Adaptive Radio (AR) feature which 406 * monitors the used radio band in order to decide whether turbo mode may 407 * be used or not. 408 * 409 * This article claims Super G sticks to bonding of channels 5 and 6 for 410 * USA: 411 * 412 * http://www.pcworld.com/article/id,113428-page,1/article.html 413 * 414 * The channel bonding seems to be driver specific though. 415 * 416 * In addition to TURBO modes we also have the following features for even 417 * greater speed-up: 418 * 419 * - Bursting: allows multiple frames to be sent at once, rather than pausing 420 * after each frame. Bursting is a standards-compliant feature that can be 421 * used with any Access Point. 422 * 423 * - Fast frames: increases the amount of information that can be sent per 424 * frame, also resulting in a reduction of transmission overhead. It is a 425 * proprietary feature that needs to be supported by the Access Point. 426 * 427 * - Compression: data frames are compressed in real time using a Lempel Ziv 428 * algorithm. This is done transparently. Once this feature is enabled, 429 * compression and decompression takes place inside the chipset, without 430 * putting additional load on the host CPU. 431 * 432 * As with XR we also don't plan to support SuperAG features for now. You can 433 * get a mode similar to TURBO by using 40MHz bwmode. 434 */ 435 436 437/** 438 * enum ath5k_driver_mode - PHY operation mode 439 * @AR5K_MODE_11A: 802.11a 440 * @AR5K_MODE_11B: 802.11b 441 * @AR5K_MODE_11G: 801.11g 442 * @AR5K_MODE_MAX: Used for boundary checks 443 * 444 * Do not change the order here, we use these as 445 * array indices and it also maps EEPROM structures. 446 */ 447enum ath5k_driver_mode { 448 AR5K_MODE_11A = 0, 449 AR5K_MODE_11B = 1, 450 AR5K_MODE_11G = 2, 451 AR5K_MODE_MAX = 3 452}; 453 454/** 455 * enum ath5k_ant_mode - Antenna operation mode 456 * @AR5K_ANTMODE_DEFAULT: Default antenna setup 457 * @AR5K_ANTMODE_FIXED_A: Only antenna A is present 458 * @AR5K_ANTMODE_FIXED_B: Only antenna B is present 459 * @AR5K_ANTMODE_SINGLE_AP: STA locked on a single ap 460 * @AR5K_ANTMODE_SECTOR_AP: AP with tx antenna set on tx desc 461 * @AR5K_ANTMODE_SECTOR_STA: STA with tx antenna set on tx desc 462 * @AR5K_ANTMODE_DEBUG: Debug mode -A -> Rx, B-> Tx- 463 * @AR5K_ANTMODE_MAX: Used for boundary checks 464 * 465 * For more infos on antenna control check out phy.c 466 */ 467enum ath5k_ant_mode { 468 AR5K_ANTMODE_DEFAULT = 0, 469 AR5K_ANTMODE_FIXED_A = 1, 470 AR5K_ANTMODE_FIXED_B = 2, 471 AR5K_ANTMODE_SINGLE_AP = 3, 472 AR5K_ANTMODE_SECTOR_AP = 4, 473 AR5K_ANTMODE_SECTOR_STA = 5, 474 AR5K_ANTMODE_DEBUG = 6, 475 AR5K_ANTMODE_MAX, 476}; 477 478/** 479 * enum ath5k_bw_mode - Bandwidth operation mode 480 * @AR5K_BWMODE_DEFAULT: 20MHz, default operation 481 * @AR5K_BWMODE_5MHZ: Quarter rate 482 * @AR5K_BWMODE_10MHZ: Half rate 483 * @AR5K_BWMODE_40MHZ: Turbo 484 */ 485enum ath5k_bw_mode { 486 AR5K_BWMODE_DEFAULT = 0, 487 AR5K_BWMODE_5MHZ = 1, 488 AR5K_BWMODE_10MHZ = 2, 489 AR5K_BWMODE_40MHZ = 3 490}; 491 492 493 494/****************\ 495 TX DEFINITIONS 496\****************/ 497 498/** 499 * struct ath5k_tx_status - TX Status descriptor 500 * @ts_seqnum: Sequence number 501 * @ts_tstamp: Timestamp 502 * @ts_status: Status code 503 * @ts_final_idx: Final transmission series index 504 * @ts_final_retry: Final retry count 505 * @ts_rssi: RSSI for received ACK 506 * @ts_shortretry: Short retry count 507 * @ts_virtcol: Virtual collision count 508 * @ts_antenna: Antenna used 509 * 510 * TX status descriptor gets filled by the hw 511 * on each transmission attempt. 512 */ 513struct ath5k_tx_status { 514 u16 ts_seqnum; 515 u16 ts_tstamp; 516 u8 ts_status; 517 u8 ts_final_idx; 518 u8 ts_final_retry; 519 s8 ts_rssi; 520 u8 ts_shortretry; 521 u8 ts_virtcol; 522 u8 ts_antenna; 523}; 524 525#define AR5K_TXSTAT_ALTRATE 0x80 526#define AR5K_TXERR_XRETRY 0x01 527#define AR5K_TXERR_FILT 0x02 528#define AR5K_TXERR_FIFO 0x04 529 530/** 531 * enum ath5k_tx_queue - Queue types used to classify tx queues. 532 * @AR5K_TX_QUEUE_INACTIVE: q is unused -- see ath5k_hw_release_tx_queue 533 * @AR5K_TX_QUEUE_DATA: A normal data queue 534 * @AR5K_TX_QUEUE_BEACON: The beacon queue 535 * @AR5K_TX_QUEUE_CAB: The after-beacon queue 536 * @AR5K_TX_QUEUE_UAPSD: Unscheduled Automatic Power Save Delivery queue 537 */ 538enum ath5k_tx_queue { 539 AR5K_TX_QUEUE_INACTIVE = 0, 540 AR5K_TX_QUEUE_DATA, 541 AR5K_TX_QUEUE_BEACON, 542 AR5K_TX_QUEUE_CAB, 543 AR5K_TX_QUEUE_UAPSD, 544}; 545 546#define AR5K_NUM_TX_QUEUES 10 547#define AR5K_NUM_TX_QUEUES_NOQCU 2 548 549/** 550 * enum ath5k_tx_queue_subtype - Queue sub-types to classify normal data queues 551 * @AR5K_WME_AC_BK: Background traffic 552 * @AR5K_WME_AC_BE: Best-effort (normal) traffic 553 * @AR5K_WME_AC_VI: Video traffic 554 * @AR5K_WME_AC_VO: Voice traffic 555 * 556 * These are the 4 Access Categories as defined in 557 * WME spec. 0 is the lowest priority and 4 is the 558 * highest. Normal data that hasn't been classified 559 * goes to the Best Effort AC. 560 */ 561enum ath5k_tx_queue_subtype { 562 AR5K_WME_AC_BK = 0, 563 AR5K_WME_AC_BE, 564 AR5K_WME_AC_VI, 565 AR5K_WME_AC_VO, 566}; 567 568/** 569 * enum ath5k_tx_queue_id - Queue ID numbers as returned by the hw functions 570 * @AR5K_TX_QUEUE_ID_NOQCU_DATA: Data queue on AR5210 (no QCU available) 571 * @AR5K_TX_QUEUE_ID_NOQCU_BEACON: Beacon queue on AR5210 (no QCU available) 572 * @AR5K_TX_QUEUE_ID_DATA_MIN: Data queue min index 573 * @AR5K_TX_QUEUE_ID_DATA_MAX: Data queue max index 574 * @AR5K_TX_QUEUE_ID_CAB: Content after beacon queue 575 * @AR5K_TX_QUEUE_ID_BEACON: Beacon queue 576 * @AR5K_TX_QUEUE_ID_UAPSD: Urgent Automatic Power Save Delivery, 577 * 578 * Each number represents a hw queue. If hw does not support hw queues 579 * (eg 5210) all data goes in one queue. 580 */ 581enum ath5k_tx_queue_id { 582 AR5K_TX_QUEUE_ID_NOQCU_DATA = 0, 583 AR5K_TX_QUEUE_ID_NOQCU_BEACON = 1, 584 AR5K_TX_QUEUE_ID_DATA_MIN = 0, 585 AR5K_TX_QUEUE_ID_DATA_MAX = 3, 586 AR5K_TX_QUEUE_ID_UAPSD = 7, 587 AR5K_TX_QUEUE_ID_CAB = 8, 588 AR5K_TX_QUEUE_ID_BEACON = 9, 589}; 590 591/* 592 * Flags to set hw queue's parameters... 593 */ 594#define AR5K_TXQ_FLAG_TXOKINT_ENABLE 0x0001 /* Enable TXOK interrupt */ 595#define AR5K_TXQ_FLAG_TXERRINT_ENABLE 0x0002 /* Enable TXERR interrupt */ 596#define AR5K_TXQ_FLAG_TXEOLINT_ENABLE 0x0004 /* Enable TXEOL interrupt -not used- */ 597#define AR5K_TXQ_FLAG_TXDESCINT_ENABLE 0x0008 /* Enable TXDESC interrupt -not used- */ 598#define AR5K_TXQ_FLAG_TXURNINT_ENABLE 0x0010 /* Enable TXURN interrupt */ 599#define AR5K_TXQ_FLAG_CBRORNINT_ENABLE 0x0020 /* Enable CBRORN interrupt */ 600#define AR5K_TXQ_FLAG_CBRURNINT_ENABLE 0x0040 /* Enable CBRURN interrupt */ 601#define AR5K_TXQ_FLAG_QTRIGINT_ENABLE 0x0080 /* Enable QTRIG interrupt */ 602#define AR5K_TXQ_FLAG_TXNOFRMINT_ENABLE 0x0100 /* Enable TXNOFRM interrupt */ 603#define AR5K_TXQ_FLAG_BACKOFF_DISABLE 0x0200 /* Disable random post-backoff */ 604#define AR5K_TXQ_FLAG_RDYTIME_EXP_POLICY_ENABLE 0x0300 /* Enable ready time expiry policy (?)*/ 605#define AR5K_TXQ_FLAG_FRAG_BURST_BACKOFF_ENABLE 0x0800 /* Enable backoff while bursting */ 606#define AR5K_TXQ_FLAG_POST_FR_BKOFF_DIS 0x1000 /* Disable backoff while bursting */ 607#define AR5K_TXQ_FLAG_COMPRESSION_ENABLE 0x2000 /* Enable hw compression -not implemented-*/ 608 609/** 610 * struct ath5k_txq - Transmit queue state 611 * @qnum: Hardware q number 612 * @link: Link ptr in last TX desc 613 * @q: Transmit queue (&struct list_head) 614 * @lock: Lock on q and link 615 * @setup: Is the queue configured 616 * @txq_len:Number of queued buffers 617 * @txq_max: Max allowed num of queued buffers 618 * @txq_poll_mark: Used to check if queue got stuck 619 * @txq_stuck: Queue stuck counter 620 * 621 * One of these exists for each hardware transmit queue. 622 * Packets sent to us from above are assigned to queues based 623 * on their priority. Not all devices support a complete set 624 * of hardware transmit queues. For those devices the array 625 * sc_ac2q will map multiple priorities to fewer hardware queues 626 * (typically all to one hardware queue). 627 */ 628struct ath5k_txq { 629 unsigned int qnum; 630 u32 *link; 631 struct list_head q; 632 spinlock_t lock; 633 bool setup; 634 int txq_len; 635 int txq_max; 636 bool txq_poll_mark; 637 unsigned int txq_stuck; 638}; 639 640/** 641 * struct ath5k_txq_info - A struct to hold TX queue's parameters 642 * @tqi_type: One of enum ath5k_tx_queue 643 * @tqi_subtype: One of enum ath5k_tx_queue_subtype 644 * @tqi_flags: TX queue flags (see above) 645 * @tqi_aifs: Arbitrated Inter-frame Space 646 * @tqi_cw_min: Minimum Contention Window 647 * @tqi_cw_max: Maximum Contention Window 648 * @tqi_cbr_period: Constant bit rate period 649 * @tqi_ready_time: Time queue waits after an event when RDYTIME is enabled 650 */ 651struct ath5k_txq_info { 652 enum ath5k_tx_queue tqi_type; 653 enum ath5k_tx_queue_subtype tqi_subtype; 654 u16 tqi_flags; 655 u8 tqi_aifs; 656 u16 tqi_cw_min; 657 u16 tqi_cw_max; 658 u32 tqi_cbr_period; 659 u32 tqi_cbr_overflow_limit; 660 u32 tqi_burst_time; 661 u32 tqi_ready_time; 662}; 663 664/** 665 * enum ath5k_pkt_type - Transmit packet types 666 * @AR5K_PKT_TYPE_NORMAL: Normal data 667 * @AR5K_PKT_TYPE_ATIM: ATIM 668 * @AR5K_PKT_TYPE_PSPOLL: PS-Poll 669 * @AR5K_PKT_TYPE_BEACON: Beacon 670 * @AR5K_PKT_TYPE_PROBE_RESP: Probe response 671 * @AR5K_PKT_TYPE_PIFS: PIFS 672 * Used on tx control descriptor 673 */ 674enum ath5k_pkt_type { 675 AR5K_PKT_TYPE_NORMAL = 0, 676 AR5K_PKT_TYPE_ATIM = 1, 677 AR5K_PKT_TYPE_PSPOLL = 2, 678 AR5K_PKT_TYPE_BEACON = 3, 679 AR5K_PKT_TYPE_PROBE_RESP = 4, 680 AR5K_PKT_TYPE_PIFS = 5, 681}; 682 683/* 684 * TX power and TPC settings 685 */ 686#define AR5K_TXPOWER_OFDM(_r, _v) ( \ 687 ((0 & 1) << ((_v) + 6)) | \ 688 (((ah->ah_txpower.txp_rates_power_table[(_r)]) & 0x3f) << (_v)) \ 689) 690 691#define AR5K_TXPOWER_CCK(_r, _v) ( \ 692 (ah->ah_txpower.txp_rates_power_table[(_r)] & 0x3f) << (_v) \ 693) 694 695 696 697/****************\ 698 RX DEFINITIONS 699\****************/ 700 701/** 702 * struct ath5k_rx_status - RX Status descriptor 703 * @rs_datalen: Data length 704 * @rs_tstamp: Timestamp 705 * @rs_status: Status code 706 * @rs_phyerr: PHY error mask 707 * @rs_rssi: RSSI in 0.5dbm units 708 * @rs_keyix: Index to the key used for decrypting 709 * @rs_rate: Rate used to decode the frame 710 * @rs_antenna: Antenna used to receive the frame 711 * @rs_more: Indicates this is a frame fragment (Fast frames) 712 */ 713struct ath5k_rx_status { 714 u16 rs_datalen; 715 u16 rs_tstamp; 716 u8 rs_status; 717 u8 rs_phyerr; 718 s8 rs_rssi; 719 u8 rs_keyix; 720 u8 rs_rate; 721 u8 rs_antenna; 722 u8 rs_more; 723}; 724 725#define AR5K_RXERR_CRC 0x01 726#define AR5K_RXERR_PHY 0x02 727#define AR5K_RXERR_FIFO 0x04 728#define AR5K_RXERR_DECRYPT 0x08 729#define AR5K_RXERR_MIC 0x10 730#define AR5K_RXKEYIX_INVALID ((u8) -1) 731#define AR5K_TXKEYIX_INVALID ((u32) -1) 732 733 734/**************************\ 735 BEACON TIMERS DEFINITIONS 736\**************************/ 737 738#define AR5K_BEACON_PERIOD 0x0000ffff 739#define AR5K_BEACON_ENA 0x00800000 /*enable beacon xmit*/ 740#define AR5K_BEACON_RESET_TSF 0x01000000 /*force a TSF reset*/ 741 742 743/* 744 * TSF to TU conversion: 745 * 746 * TSF is a 64bit value in usec (microseconds). 747 * TU is a 32bit value and defined by IEEE802.11 (page 6) as "A measurement of 748 * time equal to 1024 usec", so it's roughly milliseconds (usec / 1024). 749 */ 750#define TSF_TO_TU(_tsf) (u32)((_tsf) >> 10) 751 752 753 754/*******************************\ 755 GAIN OPTIMIZATION DEFINITIONS 756\*******************************/ 757 758/** 759 * enum ath5k_rfgain - RF Gain optimization engine state 760 * @AR5K_RFGAIN_INACTIVE: Engine disabled 761 * @AR5K_RFGAIN_ACTIVE: Probe active 762 * @AR5K_RFGAIN_READ_REQUESTED: Probe requested 763 * @AR5K_RFGAIN_NEED_CHANGE: Gain_F needs change 764 */ 765enum ath5k_rfgain { 766 AR5K_RFGAIN_INACTIVE = 0, 767 AR5K_RFGAIN_ACTIVE, 768 AR5K_RFGAIN_READ_REQUESTED, 769 AR5K_RFGAIN_NEED_CHANGE, 770}; 771 772/** 773 * struct ath5k_gain - RF Gain optimization engine state data 774 * @g_step_idx: Current step index 775 * @g_current: Current gain 776 * @g_target: Target gain 777 * @g_low: Low gain boundary 778 * @g_high: High gain boundary 779 * @g_f_corr: Gain_F correction 780 * @g_state: One of enum ath5k_rfgain 781 */ 782struct ath5k_gain { 783 u8 g_step_idx; 784 u8 g_current; 785 u8 g_target; 786 u8 g_low; 787 u8 g_high; 788 u8 g_f_corr; 789 u8 g_state; 790}; 791 792 793 794/********************\ 795 COMMON DEFINITIONS 796\********************/ 797 798#define AR5K_SLOT_TIME_9 396 799#define AR5K_SLOT_TIME_20 880 800#define AR5K_SLOT_TIME_MAX 0xffff 801 802/** 803 * struct ath5k_athchan_2ghz - 2GHz to 5GHZ map for RF5111 804 * @a2_flags: Channel flags (internal) 805 * @a2_athchan: HW channel number (internal) 806 * 807 * This structure is used to map 2GHz channels to 808 * 5GHz Atheros channels on 2111 frequency converter 809 * that comes together with RF5111 810 * TODO: Clean up 811 */ 812struct ath5k_athchan_2ghz { 813 u32 a2_flags; 814 u16 a2_athchan; 815}; 816 817/** 818 * enum ath5k_dmasize - DMA size definitions (2^(n+2)) 819 * @AR5K_DMASIZE_4B: 4Bytes 820 * @AR5K_DMASIZE_8B: 8Bytes 821 * @AR5K_DMASIZE_16B: 16Bytes 822 * @AR5K_DMASIZE_32B: 32Bytes 823 * @AR5K_DMASIZE_64B: 64Bytes (Default) 824 * @AR5K_DMASIZE_128B: 128Bytes 825 * @AR5K_DMASIZE_256B: 256Bytes 826 * @AR5K_DMASIZE_512B: 512Bytes 827 * 828 * These are used to set DMA burst size on hw 829 * 830 * Note: Some platforms can't handle more than 4Bytes 831 * be careful on embedded boards. 832 */ 833enum ath5k_dmasize { 834 AR5K_DMASIZE_4B = 0, 835 AR5K_DMASIZE_8B, 836 AR5K_DMASIZE_16B, 837 AR5K_DMASIZE_32B, 838 AR5K_DMASIZE_64B, 839 AR5K_DMASIZE_128B, 840 AR5K_DMASIZE_256B, 841 AR5K_DMASIZE_512B 842}; 843 844 845 846/******************\ 847 RATE DEFINITIONS 848\******************/ 849 850/** 851 * DOC: Rate codes 852 * 853 * Seems the ar5xxx hardware supports up to 32 rates, indexed by 1-32. 854 * 855 * The rate code is used to get the RX rate or set the TX rate on the 856 * hardware descriptors. It is also used for internal modulation control 857 * and settings. 858 * 859 * This is the hardware rate map we are aware of (html unfriendly): 860 * 861 * Rate code Rate (Kbps) 862 * --------- ----------- 863 * 0x01 3000 (XR) 864 * 0x02 1000 (XR) 865 * 0x03 250 (XR) 866 * 0x04 - 05 -Reserved- 867 * 0x06 2000 (XR) 868 * 0x07 500 (XR) 869 * 0x08 48000 (OFDM) 870 * 0x09 24000 (OFDM) 871 * 0x0A 12000 (OFDM) 872 * 0x0B 6000 (OFDM) 873 * 0x0C 54000 (OFDM) 874 * 0x0D 36000 (OFDM) 875 * 0x0E 18000 (OFDM) 876 * 0x0F 9000 (OFDM) 877 * 0x10 - 17 -Reserved- 878 * 0x18 11000L (CCK) 879 * 0x19 5500L (CCK) 880 * 0x1A 2000L (CCK) 881 * 0x1B 1000L (CCK) 882 * 0x1C 11000S (CCK) 883 * 0x1D 5500S (CCK) 884 * 0x1E 2000S (CCK) 885 * 0x1F -Reserved- 886 * 887 * "S" indicates CCK rates with short preamble and "L" with long preamble. 888 * 889 * AR5211 has different rate codes for CCK (802.11B) rates. It only uses the 890 * lowest 4 bits, so they are the same as above with a 0xF mask. 891 * (0xB, 0xA, 0x9 and 0x8 for 1M, 2M, 5.5M and 11M). 892 * We handle this in ath5k_setup_bands(). 893 */ 894#define AR5K_MAX_RATES 32 895 896/* B */ 897#define ATH5K_RATE_CODE_1M 0x1B 898#define ATH5K_RATE_CODE_2M 0x1A 899#define ATH5K_RATE_CODE_5_5M 0x19 900#define ATH5K_RATE_CODE_11M 0x18 901/* A and G */ 902#define ATH5K_RATE_CODE_6M 0x0B 903#define ATH5K_RATE_CODE_9M 0x0F 904#define ATH5K_RATE_CODE_12M 0x0A 905#define ATH5K_RATE_CODE_18M 0x0E 906#define ATH5K_RATE_CODE_24M 0x09 907#define ATH5K_RATE_CODE_36M 0x0D 908#define ATH5K_RATE_CODE_48M 0x08 909#define ATH5K_RATE_CODE_54M 0x0C 910 911/* Adding this flag to rate_code on B rates 912 * enables short preamble */ 913#define AR5K_SET_SHORT_PREAMBLE 0x04 914 915/* 916 * Crypto definitions 917 */ 918 919#define AR5K_KEYCACHE_SIZE 8 920extern bool ath5k_modparam_nohwcrypt; 921 922/***********************\ 923 HW RELATED DEFINITIONS 924\***********************/ 925 926/* 927 * Misc definitions 928 */ 929#define AR5K_RSSI_EP_MULTIPLIER (1 << 7) 930 931#define AR5K_ASSERT_ENTRY(_e, _s) do { \ 932 if (_e >= _s) \ 933 return false; \ 934} while (0) 935 936/* 937 * Hardware interrupt abstraction 938 */ 939 940/** 941 * enum ath5k_int - Hardware interrupt masks helpers 942 * @AR5K_INT_RXOK: Frame successfully received 943 * @AR5K_INT_RXDESC: Request RX descriptor/Read RX descriptor 944 * @AR5K_INT_RXERR: Frame reception failed 945 * @AR5K_INT_RXNOFRM: No frame received within a specified time period 946 * @AR5K_INT_RXEOL: Reached "End Of List", means we need more RX descriptors 947 * @AR5K_INT_RXORN: Indicates we got RX FIFO overrun. Note that Rx overrun is 948 * not always fatal, on some chips we can continue operation 949 * without resetting the card, that's why %AR5K_INT_FATAL is not 950 * common for all chips. 951 * @AR5K_INT_RX_ALL: Mask to identify all RX related interrupts 952 * 953 * @AR5K_INT_TXOK: Frame transmission success 954 * @AR5K_INT_TXDESC: Request TX descriptor/Read TX status descriptor 955 * @AR5K_INT_TXERR: Frame transmission failure 956 * @AR5K_INT_TXEOL: Received End Of List for VEOL (Virtual End Of List). The 957 * Queue Control Unit (QCU) signals an EOL interrupt only if a 958 * descriptor's LinkPtr is NULL. For more details, refer to: 959 * "http://www.freepatentsonline.com/20030225739.html" 960 * @AR5K_INT_TXNOFRM: No frame was transmitted within a specified time period 961 * @AR5K_INT_TXURN: Indicates we got TX FIFO underrun. In such case we should 962 * increase the TX trigger threshold. 963 * @AR5K_INT_TX_ALL: Mask to identify all TX related interrupts 964 * 965 * @AR5K_INT_MIB: Indicates the either Management Information Base counters or 966 * one of the PHY error counters reached the maximum value and 967 * should be read and cleared. 968 * @AR5K_INT_SWI: Software triggered interrupt. 969 * @AR5K_INT_RXPHY: RX PHY Error 970 * @AR5K_INT_RXKCM: RX Key cache miss 971 * @AR5K_INT_SWBA: SoftWare Beacon Alert - indicates its time to send a 972 * beacon that must be handled in software. The alternative is if 973 * you have VEOL support, in that case you let the hardware deal 974 * with things. 975 * @AR5K_INT_BRSSI: Beacon received with an RSSI value below our threshold 976 * @AR5K_INT_BMISS: If in STA mode this indicates we have stopped seeing 977 * beacons from the AP have associated with, we should probably 978 * try to reassociate. When in IBSS mode this might mean we have 979 * not received any beacons from any local stations. Note that 980 * every station in an IBSS schedules to send beacons at the 981 * Target Beacon Transmission Time (TBTT) with a random backoff. 982 * @AR5K_INT_BNR: Beacon queue got triggered (DMA beacon alert) while empty. 983 * @AR5K_INT_TIM: Beacon with local station's TIM bit set 984 * @AR5K_INT_DTIM: Beacon with DTIM bit and zero DTIM count received 985 * @AR5K_INT_DTIM_SYNC: DTIM sync lost 986 * @AR5K_INT_GPIO: GPIO interrupt is used for RF Kill switches connected to 987 * our GPIO pins. 988 * @AR5K_INT_BCN_TIMEOUT: Beacon timeout, we waited after TBTT but got noting 989 * @AR5K_INT_CAB_TIMEOUT: We waited for CAB traffic after the beacon but got 990 * nothing or an incomplete CAB frame sequence. 991 * @AR5K_INT_QCBRORN: A queue got it's CBR counter expired 992 * @AR5K_INT_QCBRURN: A queue got triggered wile empty 993 * @AR5K_INT_QTRIG: A queue got triggered 994 * 995 * @AR5K_INT_FATAL: Fatal errors were encountered, typically caused by bus/DMA 996 * errors. Indicates we need to reset the card. 997 * @AR5K_INT_GLOBAL: Used to clear and set the IER 998 * @AR5K_INT_NOCARD: Signals the card has been removed 999 * @AR5K_INT_COMMON: Common interrupts shared among MACs with the same 1000 * bit value 1001 * 1002 * These are mapped to take advantage of some common bits 1003 * between the MACs, to be able to set intr properties 1004 * easier. Some of them are not used yet inside hw.c. Most map 1005 * to the respective hw interrupt value as they are common among different 1006 * MACs. 1007 */ 1008enum ath5k_int { 1009 AR5K_INT_RXOK = 0x00000001, 1010 AR5K_INT_RXDESC = 0x00000002, 1011 AR5K_INT_RXERR = 0x00000004, 1012 AR5K_INT_RXNOFRM = 0x00000008, 1013 AR5K_INT_RXEOL = 0x00000010, 1014 AR5K_INT_RXORN = 0x00000020, 1015 AR5K_INT_TXOK = 0x00000040, 1016 AR5K_INT_TXDESC = 0x00000080, 1017 AR5K_INT_TXERR = 0x00000100, 1018 AR5K_INT_TXNOFRM = 0x00000200, 1019 AR5K_INT_TXEOL = 0x00000400, 1020 AR5K_INT_TXURN = 0x00000800, 1021 AR5K_INT_MIB = 0x00001000, 1022 AR5K_INT_SWI = 0x00002000, 1023 AR5K_INT_RXPHY = 0x00004000, 1024 AR5K_INT_RXKCM = 0x00008000, 1025 AR5K_INT_SWBA = 0x00010000, 1026 AR5K_INT_BRSSI = 0x00020000, 1027 AR5K_INT_BMISS = 0x00040000, 1028 AR5K_INT_FATAL = 0x00080000, /* Non common */ 1029 AR5K_INT_BNR = 0x00100000, /* Non common */ 1030 AR5K_INT_TIM = 0x00200000, /* Non common */ 1031 AR5K_INT_DTIM = 0x00400000, /* Non common */ 1032 AR5K_INT_DTIM_SYNC = 0x00800000, /* Non common */ 1033 AR5K_INT_GPIO = 0x01000000, 1034 AR5K_INT_BCN_TIMEOUT = 0x02000000, /* Non common */ 1035 AR5K_INT_CAB_TIMEOUT = 0x04000000, /* Non common */ 1036 AR5K_INT_QCBRORN = 0x08000000, /* Non common */ 1037 AR5K_INT_QCBRURN = 0x10000000, /* Non common */ 1038 AR5K_INT_QTRIG = 0x20000000, /* Non common */ 1039 AR5K_INT_GLOBAL = 0x80000000, 1040 1041 AR5K_INT_TX_ALL = AR5K_INT_TXOK 1042 | AR5K_INT_TXDESC 1043 | AR5K_INT_TXERR 1044 | AR5K_INT_TXNOFRM 1045 | AR5K_INT_TXEOL 1046 | AR5K_INT_TXURN, 1047 1048 AR5K_INT_RX_ALL = AR5K_INT_RXOK 1049 | AR5K_INT_RXDESC 1050 | AR5K_INT_RXERR 1051 | AR5K_INT_RXNOFRM 1052 | AR5K_INT_RXEOL 1053 | AR5K_INT_RXORN, 1054 1055 AR5K_INT_COMMON = AR5K_INT_RXOK 1056 | AR5K_INT_RXDESC 1057 | AR5K_INT_RXERR 1058 | AR5K_INT_RXNOFRM 1059 | AR5K_INT_RXEOL 1060 | AR5K_INT_RXORN 1061 | AR5K_INT_TXOK 1062 | AR5K_INT_TXDESC 1063 | AR5K_INT_TXERR 1064 | AR5K_INT_TXNOFRM 1065 | AR5K_INT_TXEOL 1066 | AR5K_INT_TXURN 1067 | AR5K_INT_MIB 1068 | AR5K_INT_SWI 1069 | AR5K_INT_RXPHY 1070 | AR5K_INT_RXKCM 1071 | AR5K_INT_SWBA 1072 | AR5K_INT_BRSSI 1073 | AR5K_INT_BMISS 1074 | AR5K_INT_GPIO 1075 | AR5K_INT_GLOBAL, 1076 1077 AR5K_INT_NOCARD = 0xffffffff 1078}; 1079 1080/** 1081 * enum ath5k_calibration_mask - Mask which calibration is active at the moment 1082 * @AR5K_CALIBRATION_FULL: Full calibration (AGC + SHORT) 1083 * @AR5K_CALIBRATION_SHORT: Short calibration (NF + I/Q) 1084 * @AR5K_CALIBRATION_NF: Noise Floor calibration 1085 * @AR5K_CALIBRATION_ANI: Adaptive Noise Immunity 1086 */ 1087enum ath5k_calibration_mask { 1088 AR5K_CALIBRATION_FULL = 0x01, 1089 AR5K_CALIBRATION_SHORT = 0x02, 1090 AR5K_CALIBRATION_NF = 0x04, 1091 AR5K_CALIBRATION_ANI = 0x08, 1092}; 1093 1094/** 1095 * enum ath5k_power_mode - Power management modes 1096 * @AR5K_PM_UNDEFINED: Undefined 1097 * @AR5K_PM_AUTO: Allow card to sleep if possible 1098 * @AR5K_PM_AWAKE: Force card to wake up 1099 * @AR5K_PM_FULL_SLEEP: Force card to full sleep (DANGEROUS) 1100 * @AR5K_PM_NETWORK_SLEEP: Allow to sleep for a specified duration 1101 * 1102 * Currently only PM_AWAKE is used, FULL_SLEEP and NETWORK_SLEEP/AUTO 1103 * are also known to have problems on some cards. This is not a big 1104 * problem though because we can have almost the same effect as 1105 * FULL_SLEEP by putting card on warm reset (it's almost powered down). 1106 */ 1107enum ath5k_power_mode { 1108 AR5K_PM_UNDEFINED = 0, 1109 AR5K_PM_AUTO, 1110 AR5K_PM_AWAKE, 1111 AR5K_PM_FULL_SLEEP, 1112 AR5K_PM_NETWORK_SLEEP, 1113}; 1114 1115/* 1116 * These match net80211 definitions (not used in 1117 * mac80211). 1118 * TODO: Clean this up 1119 */ 1120#define AR5K_LED_INIT 0 /*IEEE80211_S_INIT*/ 1121#define AR5K_LED_SCAN 1 /*IEEE80211_S_SCAN*/ 1122#define AR5K_LED_AUTH 2 /*IEEE80211_S_AUTH*/ 1123#define AR5K_LED_ASSOC 3 /*IEEE80211_S_ASSOC*/ 1124#define AR5K_LED_RUN 4 /*IEEE80211_S_RUN*/ 1125 1126/* GPIO-controlled software LED */ 1127#define AR5K_SOFTLED_PIN 0 1128#define AR5K_SOFTLED_ON 0 1129#define AR5K_SOFTLED_OFF 1 1130 1131 1132/* XXX: we *may* move cap_range stuff to struct wiphy */ 1133struct ath5k_capabilities { 1134 /* 1135 * Supported PHY modes 1136 * (ie. AR5K_MODE_11A, AR5K_MODE_11B, ...) 1137 */ 1138 DECLARE_BITMAP(cap_mode, AR5K_MODE_MAX); 1139 1140 /* 1141 * Frequency range (without regulation restrictions) 1142 */ 1143 struct { 1144 u16 range_2ghz_min; 1145 u16 range_2ghz_max; 1146 u16 range_5ghz_min; 1147 u16 range_5ghz_max; 1148 } cap_range; 1149 1150 /* 1151 * Values stored in the EEPROM (some of them...) 1152 */ 1153 struct ath5k_eeprom_info cap_eeprom; 1154 1155 /* 1156 * Queue information 1157 */ 1158 struct { 1159 u8 q_tx_num; 1160 } cap_queues; 1161 1162 bool cap_has_phyerr_counters; 1163 bool cap_has_mrr_support; 1164 bool cap_needs_2GHz_ovr; 1165}; 1166 1167/* size of noise floor history (keep it a power of two) */ 1168#define ATH5K_NF_CAL_HIST_MAX 8 1169struct ath5k_nfcal_hist { 1170 s16 index; /* current index into nfval */ 1171 s16 nfval[ATH5K_NF_CAL_HIST_MAX]; /* last few noise floors */ 1172}; 1173 1174#define ATH5K_LED_MAX_NAME_LEN 31 1175 1176/* 1177 * State for LED triggers 1178 */ 1179struct ath5k_led { 1180 char name[ATH5K_LED_MAX_NAME_LEN + 1]; /* name of the LED in sysfs */ 1181 struct ath5k_hw *ah; /* driver state */ 1182 struct led_classdev led_dev; /* led classdev */ 1183}; 1184 1185/* Rfkill */ 1186struct ath5k_rfkill { 1187 /* GPIO PIN for rfkill */ 1188 u16 gpio; 1189 /* polarity of rfkill GPIO PIN */ 1190 bool polarity; 1191 /* RFKILL toggle tasklet */ 1192 struct tasklet_struct toggleq; 1193}; 1194 1195/* statistics */ 1196struct ath5k_statistics { 1197 /* antenna use */ 1198 unsigned int antenna_rx[5]; /* frames count per antenna RX */ 1199 unsigned int antenna_tx[5]; /* frames count per antenna TX */ 1200 1201 /* frame errors */ 1202 unsigned int rx_all_count; /* all RX frames, including errors */ 1203 unsigned int tx_all_count; /* all TX frames, including errors */ 1204 unsigned int rx_bytes_count; /* all RX bytes, including errored pkts 1205 * and the MAC headers for each packet 1206 */ 1207 unsigned int tx_bytes_count; /* all TX bytes, including errored pkts 1208 * and the MAC headers and padding for 1209 * each packet. 1210 */ 1211 unsigned int rxerr_crc; 1212 unsigned int rxerr_phy; 1213 unsigned int rxerr_phy_code[32]; 1214 unsigned int rxerr_fifo; 1215 unsigned int rxerr_decrypt; 1216 unsigned int rxerr_mic; 1217 unsigned int rxerr_proc; 1218 unsigned int rxerr_jumbo; 1219 unsigned int txerr_retry; 1220 unsigned int txerr_fifo; 1221 unsigned int txerr_filt; 1222 1223 /* MIB counters */ 1224 unsigned int ack_fail; 1225 unsigned int rts_fail; 1226 unsigned int rts_ok; 1227 unsigned int fcs_error; 1228 unsigned int beacons; 1229 1230 unsigned int mib_intr; 1231 unsigned int rxorn_intr; 1232 unsigned int rxeol_intr; 1233}; 1234 1235/* 1236 * Misc defines 1237 */ 1238 1239#define AR5K_MAX_GPIO 10 1240#define AR5K_MAX_RF_BANKS 8 1241 1242#if CHAN_DEBUG 1243#define ATH_CHAN_MAX (26 + 26 + 26 + 200 + 200) 1244#else 1245#define ATH_CHAN_MAX (14 + 14 + 14 + 252 + 20) 1246#endif 1247 1248#define ATH_RXBUF 40 /* number of RX buffers */ 1249#define ATH_TXBUF 200 /* number of TX buffers */ 1250#define ATH_BCBUF 4 /* number of beacon buffers */ 1251#define ATH5K_TXQ_LEN_MAX (ATH_TXBUF / 4) /* bufs per queue */ 1252#define ATH5K_TXQ_LEN_LOW (ATH5K_TXQ_LEN_MAX / 2) /* low mark */ 1253 1254/* Driver state associated with an instance of a device */ 1255struct ath5k_hw { 1256 struct ath_common common; 1257 1258 struct pci_dev *pdev; 1259 struct device *dev; /* for dma mapping */ 1260 int irq; 1261 u16 devid; 1262 void __iomem *iobase; /* address of the device */ 1263 struct mutex lock; /* dev-level lock */ 1264 struct ieee80211_hw *hw; /* IEEE 802.11 common */ 1265 struct ieee80211_supported_band sbands[IEEE80211_NUM_BANDS]; 1266 struct ieee80211_channel channels[ATH_CHAN_MAX]; 1267 struct ieee80211_rate rates[IEEE80211_NUM_BANDS][AR5K_MAX_RATES]; 1268 s8 rate_idx[IEEE80211_NUM_BANDS][AR5K_MAX_RATES]; 1269 enum nl80211_iftype opmode; 1270 1271#ifdef CONFIG_ATH5K_DEBUG 1272 struct ath5k_dbg_info debug; /* debug info */ 1273#endif /* CONFIG_ATH5K_DEBUG */ 1274 1275 struct ath5k_buf *bufptr; /* allocated buffer ptr */ 1276 struct ath5k_desc *desc; /* TX/RX descriptors */ 1277 dma_addr_t desc_daddr; /* DMA (physical) address */ 1278 size_t desc_len; /* size of TX/RX descriptors */ 1279 1280 DECLARE_BITMAP(status, 4); 1281#define ATH_STAT_INVALID 0 /* disable hardware accesses */ 1282#define ATH_STAT_PROMISC 1 1283#define ATH_STAT_LEDSOFT 2 /* enable LED gpio status */ 1284#define ATH_STAT_STARTED 3 /* opened & irqs enabled */ 1285 1286 unsigned int filter_flags; /* HW flags, AR5K_RX_FILTER_* */ 1287 struct ieee80211_channel *curchan; /* current h/w channel */ 1288 1289 u16 nvifs; 1290 1291 enum ath5k_int imask; /* interrupt mask copy */ 1292 1293 spinlock_t irqlock; 1294 bool rx_pending; /* rx tasklet pending */ 1295 bool tx_pending; /* tx tasklet pending */ 1296 1297 u8 bssidmask[ETH_ALEN]; 1298 1299 unsigned int led_pin, /* GPIO pin for driving LED */ 1300 led_on; /* pin setting for LED on */ 1301 1302 struct work_struct reset_work; /* deferred chip reset */ 1303 struct work_struct calib_work; /* deferred phy calibration */ 1304 1305 struct list_head rxbuf; /* receive buffer */ 1306 spinlock_t rxbuflock; 1307 u32 *rxlink; /* link ptr in last RX desc */ 1308 struct tasklet_struct rxtq; /* rx intr tasklet */ 1309 struct ath5k_led rx_led; /* rx led */ 1310 1311 struct list_head txbuf; /* transmit buffer */ 1312 spinlock_t txbuflock; 1313 unsigned int txbuf_len; /* buf count in txbuf list */ 1314 struct ath5k_txq txqs[AR5K_NUM_TX_QUEUES]; /* tx queues */ 1315 struct tasklet_struct txtq; /* tx intr tasklet */ 1316 struct ath5k_led tx_led; /* tx led */ 1317 1318 struct ath5k_rfkill rf_kill; 1319 1320 spinlock_t block; /* protects beacon */ 1321 struct tasklet_struct beacontq; /* beacon intr tasklet */ 1322 struct list_head bcbuf; /* beacon buffer */ 1323 struct ieee80211_vif *bslot[ATH_BCBUF]; 1324 u16 num_ap_vifs; 1325 u16 num_adhoc_vifs; 1326 u16 num_mesh_vifs; 1327 unsigned int bhalq, /* SW q for outgoing beacons */ 1328 bmisscount, /* missed beacon transmits */ 1329 bintval, /* beacon interval in TU */ 1330 bsent; 1331 unsigned int nexttbtt; /* next beacon time in TU */ 1332 struct ath5k_txq *cabq; /* content after beacon */ 1333 1334 bool assoc; /* associate state */ 1335 bool enable_beacon; /* true if beacons are on */ 1336 1337 struct ath5k_statistics stats; 1338 1339 struct ath5k_ani_state ani_state; 1340 struct tasklet_struct ani_tasklet; /* ANI calibration */ 1341 1342 struct delayed_work tx_complete_work; 1343 1344 struct survey_info survey; /* collected survey info */ 1345 1346 enum ath5k_int ah_imr; 1347 1348 struct ieee80211_channel *ah_current_channel; 1349 bool ah_iq_cal_needed; 1350 bool ah_single_chip; 1351 1352 enum ath5k_version ah_version; 1353 enum ath5k_radio ah_radio; 1354 u32 ah_mac_srev; 1355 u16 ah_mac_version; 1356 u16 ah_phy_revision; 1357 u16 ah_radio_5ghz_revision; 1358 u16 ah_radio_2ghz_revision; 1359 1360#define ah_modes ah_capabilities.cap_mode 1361#define ah_ee_version ah_capabilities.cap_eeprom.ee_version 1362 1363 u8 ah_retry_long; 1364 u8 ah_retry_short; 1365 1366 u32 ah_use_32khz_clock; 1367 1368 u8 ah_coverage_class; 1369 bool ah_ack_bitrate_high; 1370 u8 ah_bwmode; 1371 bool ah_short_slot; 1372 1373 /* Antenna Control */ 1374 u32 ah_ant_ctl[AR5K_EEPROM_N_MODES][AR5K_ANT_MAX]; 1375 u8 ah_ant_mode; 1376 u8 ah_tx_ant; 1377 u8 ah_def_ant; 1378 1379 struct ath5k_capabilities ah_capabilities; 1380 1381 struct ath5k_txq_info ah_txq[AR5K_NUM_TX_QUEUES]; 1382 u32 ah_txq_status; 1383 u32 ah_txq_imr_txok; 1384 u32 ah_txq_imr_txerr; 1385 u32 ah_txq_imr_txurn; 1386 u32 ah_txq_imr_txdesc; 1387 u32 ah_txq_imr_txeol; 1388 u32 ah_txq_imr_cbrorn; 1389 u32 ah_txq_imr_cbrurn; 1390 u32 ah_txq_imr_qtrig; 1391 u32 ah_txq_imr_nofrm; 1392 1393 u32 ah_txq_isr_txok_all; 1394 u32 ah_txq_isr_txurn; 1395 u32 ah_txq_isr_qcborn; 1396 u32 ah_txq_isr_qcburn; 1397 u32 ah_txq_isr_qtrig; 1398 1399 u32 *ah_rf_banks; 1400 size_t ah_rf_banks_size; 1401 size_t ah_rf_regs_count; 1402 struct ath5k_gain ah_gain; 1403 u8 ah_offset[AR5K_MAX_RF_BANKS]; 1404 1405 1406 struct { 1407 /* Temporary tables used for interpolation */ 1408 u8 tmpL[AR5K_EEPROM_N_PD_GAINS] 1409 [AR5K_EEPROM_POWER_TABLE_SIZE]; 1410 u8 tmpR[AR5K_EEPROM_N_PD_GAINS] 1411 [AR5K_EEPROM_POWER_TABLE_SIZE]; 1412 u8 txp_pd_table[AR5K_EEPROM_POWER_TABLE_SIZE * 2]; 1413 u16 txp_rates_power_table[AR5K_MAX_RATES]; 1414 u8 txp_min_idx; 1415 bool txp_tpc; 1416 /* Values in 0.25dB units */ 1417 s16 txp_min_pwr; 1418 s16 txp_max_pwr; 1419 s16 txp_cur_pwr; 1420 /* Values in 0.5dB units */ 1421 s16 txp_offset; 1422 s16 txp_ofdm; 1423 s16 txp_cck_ofdm_gainf_delta; 1424 /* Value in dB units */ 1425 s16 txp_cck_ofdm_pwr_delta; 1426 bool txp_setup; 1427 int txp_requested; /* Requested tx power in dBm */ 1428 } ah_txpower; 1429 1430 struct ath5k_nfcal_hist ah_nfcal_hist; 1431 1432 /* average beacon RSSI in our BSS (used by ANI) */ 1433 struct ewma ah_beacon_rssi_avg; 1434 1435 /* noise floor from last periodic calibration */ 1436 s32 ah_noise_floor; 1437 1438 /* Calibration timestamp */ 1439 unsigned long ah_cal_next_full; 1440 unsigned long ah_cal_next_short; 1441 unsigned long ah_cal_next_ani; 1442 1443 /* Calibration mask */ 1444 u8 ah_cal_mask; 1445 1446 /* 1447 * Function pointers 1448 */ 1449 int (*ah_setup_tx_desc)(struct ath5k_hw *, struct ath5k_desc *, 1450 unsigned int, unsigned int, int, enum ath5k_pkt_type, 1451 unsigned int, unsigned int, unsigned int, unsigned int, 1452 unsigned int, unsigned int, unsigned int, unsigned int); 1453 int (*ah_proc_tx_desc)(struct ath5k_hw *, struct ath5k_desc *, 1454 struct ath5k_tx_status *); 1455 int (*ah_proc_rx_desc)(struct ath5k_hw *, struct ath5k_desc *, 1456 struct ath5k_rx_status *); 1457}; 1458 1459struct ath_bus_ops { 1460 enum ath_bus_type ath_bus_type; 1461 void (*read_cachesize)(struct ath_common *common, int *csz); 1462 bool (*eeprom_read)(struct ath_common *common, u32 off, u16 *data); 1463 int (*eeprom_read_mac)(struct ath5k_hw *ah, u8 *mac); 1464}; 1465 1466/* 1467 * Prototypes 1468 */ 1469extern const struct ieee80211_ops ath5k_hw_ops; 1470 1471/* Initialization and detach functions */ 1472int ath5k_hw_init(struct ath5k_hw *ah); 1473void ath5k_hw_deinit(struct ath5k_hw *ah); 1474 1475int ath5k_sysfs_register(struct ath5k_hw *ah); 1476void ath5k_sysfs_unregister(struct ath5k_hw *ah); 1477 1478/*Chip id helper functions */ 1479int ath5k_hw_read_srev(struct ath5k_hw *ah); 1480 1481/* LED functions */ 1482int ath5k_init_leds(struct ath5k_hw *ah); 1483void ath5k_led_enable(struct ath5k_hw *ah); 1484void ath5k_led_off(struct ath5k_hw *ah); 1485void ath5k_unregister_leds(struct ath5k_hw *ah); 1486 1487 1488/* Reset Functions */ 1489int ath5k_hw_nic_wakeup(struct ath5k_hw *ah, struct ieee80211_channel *channel); 1490int ath5k_hw_on_hold(struct ath5k_hw *ah); 1491int ath5k_hw_reset(struct ath5k_hw *ah, enum nl80211_iftype op_mode, 1492 struct ieee80211_channel *channel, bool fast, bool skip_pcu); 1493int ath5k_hw_register_timeout(struct ath5k_hw *ah, u32 reg, u32 flag, u32 val, 1494 bool is_set); 1495/* Power management functions */ 1496 1497 1498/* Clock rate related functions */ 1499unsigned int ath5k_hw_htoclock(struct ath5k_hw *ah, unsigned int usec); 1500unsigned int ath5k_hw_clocktoh(struct ath5k_hw *ah, unsigned int clock); 1501void ath5k_hw_set_clockrate(struct ath5k_hw *ah); 1502 1503 1504/* DMA Related Functions */ 1505void ath5k_hw_start_rx_dma(struct ath5k_hw *ah); 1506u32 ath5k_hw_get_rxdp(struct ath5k_hw *ah); 1507int ath5k_hw_set_rxdp(struct ath5k_hw *ah, u32 phys_addr); 1508int ath5k_hw_start_tx_dma(struct ath5k_hw *ah, unsigned int queue); 1509int ath5k_hw_stop_beacon_queue(struct ath5k_hw *ah, unsigned int queue); 1510u32 ath5k_hw_get_txdp(struct ath5k_hw *ah, unsigned int queue); 1511int ath5k_hw_set_txdp(struct ath5k_hw *ah, unsigned int queue, 1512 u32 phys_addr); 1513int ath5k_hw_update_tx_triglevel(struct ath5k_hw *ah, bool increase); 1514/* Interrupt handling */ 1515bool ath5k_hw_is_intr_pending(struct ath5k_hw *ah); 1516int ath5k_hw_get_isr(struct ath5k_hw *ah, enum ath5k_int *interrupt_mask); 1517enum ath5k_int ath5k_hw_set_imr(struct ath5k_hw *ah, enum ath5k_int new_mask); 1518void ath5k_hw_update_mib_counters(struct ath5k_hw *ah); 1519/* Init/Stop functions */ 1520void ath5k_hw_dma_init(struct ath5k_hw *ah); 1521int ath5k_hw_dma_stop(struct ath5k_hw *ah); 1522 1523/* EEPROM access functions */ 1524int ath5k_eeprom_init(struct ath5k_hw *ah); 1525void ath5k_eeprom_detach(struct ath5k_hw *ah); 1526 1527 1528/* Protocol Control Unit Functions */ 1529/* Helpers */ 1530int ath5k_hw_get_frame_duration(struct ath5k_hw *ah, enum ieee80211_band band, 1531 int len, struct ieee80211_rate *rate, bool shortpre); 1532unsigned int ath5k_hw_get_default_slottime(struct ath5k_hw *ah); 1533unsigned int ath5k_hw_get_default_sifs(struct ath5k_hw *ah); 1534int ath5k_hw_set_opmode(struct ath5k_hw *ah, enum nl80211_iftype opmode); 1535void ath5k_hw_set_coverage_class(struct ath5k_hw *ah, u8 coverage_class); 1536/* RX filter control*/ 1537int ath5k_hw_set_lladdr(struct ath5k_hw *ah, const u8 *mac); 1538void ath5k_hw_set_bssid(struct ath5k_hw *ah); 1539void ath5k_hw_set_bssid_mask(struct ath5k_hw *ah, const u8 *mask); 1540void ath5k_hw_set_mcast_filter(struct ath5k_hw *ah, u32 filter0, u32 filter1); 1541u32 ath5k_hw_get_rx_filter(struct ath5k_hw *ah); 1542void ath5k_hw_set_rx_filter(struct ath5k_hw *ah, u32 filter); 1543/* Receive (DRU) start/stop functions */ 1544void ath5k_hw_start_rx_pcu(struct ath5k_hw *ah); 1545void ath5k_hw_stop_rx_pcu(struct ath5k_hw *ah); 1546/* Beacon control functions */ 1547u64 ath5k_hw_get_tsf64(struct ath5k_hw *ah); 1548void ath5k_hw_set_tsf64(struct ath5k_hw *ah, u64 tsf64); 1549void ath5k_hw_reset_tsf(struct ath5k_hw *ah); 1550void ath5k_hw_init_beacon_timers(struct ath5k_hw *ah, u32 next_beacon, 1551 u32 interval); 1552bool ath5k_hw_check_beacon_timers(struct ath5k_hw *ah, int intval); 1553/* Init function */ 1554void ath5k_hw_pcu_init(struct ath5k_hw *ah, enum nl80211_iftype op_mode); 1555 1556/* Queue Control Unit, DFS Control Unit Functions */ 1557int ath5k_hw_get_tx_queueprops(struct ath5k_hw *ah, int queue, 1558 struct ath5k_txq_info *queue_info); 1559int ath5k_hw_set_tx_queueprops(struct ath5k_hw *ah, int queue, 1560 const struct ath5k_txq_info *queue_info); 1561int ath5k_hw_setup_tx_queue(struct ath5k_hw *ah, 1562 enum ath5k_tx_queue queue_type, 1563 struct ath5k_txq_info *queue_info); 1564void ath5k_hw_set_tx_retry_limits(struct ath5k_hw *ah, 1565 unsigned int queue); 1566u32 ath5k_hw_num_tx_pending(struct ath5k_hw *ah, unsigned int queue); 1567void ath5k_hw_release_tx_queue(struct ath5k_hw *ah, unsigned int queue); 1568int ath5k_hw_reset_tx_queue(struct ath5k_hw *ah, unsigned int queue); 1569int ath5k_hw_set_ifs_intervals(struct ath5k_hw *ah, unsigned int slot_time); 1570/* Init function */ 1571int ath5k_hw_init_queues(struct ath5k_hw *ah); 1572 1573/* Hardware Descriptor Functions */ 1574int ath5k_hw_init_desc_functions(struct ath5k_hw *ah); 1575int ath5k_hw_setup_rx_desc(struct ath5k_hw *ah, struct ath5k_desc *desc, 1576 u32 size, unsigned int flags); 1577int ath5k_hw_setup_mrr_tx_desc(struct ath5k_hw *ah, struct ath5k_desc *desc, 1578 unsigned int tx_rate1, u_int tx_tries1, u_int tx_rate2, 1579 u_int tx_tries2, unsigned int tx_rate3, u_int tx_tries3); 1580 1581 1582/* GPIO Functions */ 1583void ath5k_hw_set_ledstate(struct ath5k_hw *ah, unsigned int state); 1584int ath5k_hw_set_gpio_input(struct ath5k_hw *ah, u32 gpio); 1585int ath5k_hw_set_gpio_output(struct ath5k_hw *ah, u32 gpio); 1586u32 ath5k_hw_get_gpio(struct ath5k_hw *ah, u32 gpio); 1587int ath5k_hw_set_gpio(struct ath5k_hw *ah, u32 gpio, u32 val); 1588void ath5k_hw_set_gpio_intr(struct ath5k_hw *ah, unsigned int gpio, 1589 u32 interrupt_level); 1590 1591 1592/* RFkill Functions */ 1593void ath5k_rfkill_hw_start(struct ath5k_hw *ah); 1594void ath5k_rfkill_hw_stop(struct ath5k_hw *ah); 1595 1596 1597/* Misc functions TODO: Cleanup */ 1598int ath5k_hw_set_capabilities(struct ath5k_hw *ah); 1599int ath5k_hw_enable_pspoll(struct ath5k_hw *ah, u8 *bssid, u16 assoc_id); 1600int ath5k_hw_disable_pspoll(struct ath5k_hw *ah); 1601 1602 1603/* Initial register settings functions */ 1604int ath5k_hw_write_initvals(struct ath5k_hw *ah, u8 mode, bool change_channel); 1605 1606 1607/* PHY functions */ 1608/* Misc PHY functions */ 1609u16 ath5k_hw_radio_revision(struct ath5k_hw *ah, enum ieee80211_band band); 1610int ath5k_hw_phy_disable(struct ath5k_hw *ah); 1611/* Gain_F optimization */ 1612enum ath5k_rfgain ath5k_hw_gainf_calibrate(struct ath5k_hw *ah); 1613int ath5k_hw_rfgain_opt_init(struct ath5k_hw *ah); 1614/* PHY/RF channel functions */ 1615bool ath5k_channel_ok(struct ath5k_hw *ah, struct ieee80211_channel *channel); 1616/* PHY calibration */ 1617void ath5k_hw_init_nfcal_hist(struct ath5k_hw *ah); 1618int ath5k_hw_phy_calibrate(struct ath5k_hw *ah, 1619 struct ieee80211_channel *channel); 1620void ath5k_hw_update_noise_floor(struct ath5k_hw *ah); 1621/* Spur mitigation */ 1622bool ath5k_hw_chan_has_spur_noise(struct ath5k_hw *ah, 1623 struct ieee80211_channel *channel); 1624/* Antenna control */ 1625void ath5k_hw_set_antenna_mode(struct ath5k_hw *ah, u8 ant_mode); 1626void ath5k_hw_set_antenna_switch(struct ath5k_hw *ah, u8 ee_mode); 1627/* TX power setup */ 1628int ath5k_hw_set_txpower_limit(struct ath5k_hw *ah, u8 txpower); 1629/* Init function */ 1630int ath5k_hw_phy_init(struct ath5k_hw *ah, struct ieee80211_channel *channel, 1631 u8 mode, bool fast); 1632 1633/* 1634 * Functions used internally 1635 */ 1636 1637static inline struct ath_common *ath5k_hw_common(struct ath5k_hw *ah) 1638{ 1639 return &ah->common; 1640} 1641 1642static inline struct ath_regulatory *ath5k_hw_regulatory(struct ath5k_hw *ah) 1643{ 1644 return &(ath5k_hw_common(ah)->regulatory); 1645} 1646 1647#ifdef CONFIG_ATHEROS_AR231X 1648#define AR5K_AR2315_PCI_BASE ((void __iomem *)0xb0100000) 1649 1650static inline void __iomem *ath5k_ahb_reg(struct ath5k_hw *ah, u16 reg) 1651{ 1652 /* On AR2315 and AR2317 the PCI clock domain registers 1653 * are outside of the WMAC register space */ 1654 if (unlikely((reg >= 0x4000) && (reg < 0x5000) && 1655 (ah->ah_mac_srev >= AR5K_SREV_AR2315_R6))) 1656 return AR5K_AR2315_PCI_BASE + reg; 1657 1658 return ah->iobase + reg; 1659} 1660 1661static inline u32 ath5k_hw_reg_read(struct ath5k_hw *ah, u16 reg) 1662{ 1663 return ioread32(ath5k_ahb_reg(ah, reg)); 1664} 1665 1666static inline void ath5k_hw_reg_write(struct ath5k_hw *ah, u32 val, u16 reg) 1667{ 1668 iowrite32(val, ath5k_ahb_reg(ah, reg)); 1669} 1670 1671#else 1672 1673static inline u32 ath5k_hw_reg_read(struct ath5k_hw *ah, u16 reg) 1674{ 1675 return ioread32(ah->iobase + reg); 1676} 1677 1678static inline void ath5k_hw_reg_write(struct ath5k_hw *ah, u32 val, u16 reg) 1679{ 1680 iowrite32(val, ah->iobase + reg); 1681} 1682 1683#endif 1684 1685static inline enum ath_bus_type ath5k_get_bus_type(struct ath5k_hw *ah) 1686{ 1687 return ath5k_hw_common(ah)->bus_ops->ath_bus_type; 1688} 1689 1690static inline void ath5k_read_cachesize(struct ath_common *common, int *csz) 1691{ 1692 common->bus_ops->read_cachesize(common, csz); 1693} 1694 1695static inline bool ath5k_hw_nvram_read(struct ath5k_hw *ah, u32 off, u16 *data) 1696{ 1697 struct ath_common *common = ath5k_hw_common(ah); 1698 return common->bus_ops->eeprom_read(common, off, data); 1699} 1700 1701static inline u32 ath5k_hw_bitswap(u32 val, unsigned int bits) 1702{ 1703 u32 retval = 0, bit, i; 1704 1705 for (i = 0; i < bits; i++) { 1706 bit = (val >> i) & 1; 1707 retval = (retval << 1) | bit; 1708 } 1709 1710 return retval; 1711} 1712 1713#endif 1714