ath5k.h revision e5e2647fd6ceef2cdc479954b84517535eb7febd
1/*
2 * Copyright (c) 2004-2007 Reyk Floeter <reyk@openbsd.org>
3 * Copyright (c) 2006-2007 Nick Kossifidis <mickflemm@gmail.com>
4 *
5 * Permission to use, copy, modify, and distribute this software for any
6 * purpose with or without fee is hereby granted, provided that the above
7 * copyright notice and this permission notice appear in all copies.
8 *
9 * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
10 * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
11 * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
12 * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
13 * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
14 * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
15 * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
16 */
17
18#ifndef _ATH5K_H
19#define _ATH5K_H
20
21/* TODO: Clean up channel debuging -doesn't work anyway- and start
22 * working on reg. control code using all available eeprom information
23 * -rev. engineering needed- */
24#define CHAN_DEBUG	0
25
26#include <linux/io.h>
27#include <linux/types.h>
28#include <net/mac80211.h>
29
30/* RX/TX descriptor hw structs
31 * TODO: Driver part should only see sw structs */
32#include "desc.h"
33
34/* EEPROM structs/offsets
35 * TODO: Make a more generic struct (eg. add more stuff to ath5k_capabilities)
36 * and clean up common bits, then introduce set/get functions in eeprom.c */
37#include "eeprom.h"
38#include "../ath.h"
39
40/* PCI IDs */
41#define PCI_DEVICE_ID_ATHEROS_AR5210 		0x0007 /* AR5210 */
42#define PCI_DEVICE_ID_ATHEROS_AR5311 		0x0011 /* AR5311 */
43#define PCI_DEVICE_ID_ATHEROS_AR5211 		0x0012 /* AR5211 */
44#define PCI_DEVICE_ID_ATHEROS_AR5212 		0x0013 /* AR5212 */
45#define PCI_DEVICE_ID_3COM_3CRDAG675 		0x0013 /* 3CRDAG675 (Atheros AR5212) */
46#define PCI_DEVICE_ID_3COM_2_3CRPAG175 		0x0013 /* 3CRPAG175 (Atheros AR5212) */
47#define PCI_DEVICE_ID_ATHEROS_AR5210_AP 	0x0207 /* AR5210 (Early) */
48#define PCI_DEVICE_ID_ATHEROS_AR5212_IBM	0x1014 /* AR5212 (IBM MiniPCI) */
49#define PCI_DEVICE_ID_ATHEROS_AR5210_DEFAULT 	0x1107 /* AR5210 (no eeprom) */
50#define PCI_DEVICE_ID_ATHEROS_AR5212_DEFAULT 	0x1113 /* AR5212 (no eeprom) */
51#define PCI_DEVICE_ID_ATHEROS_AR5211_DEFAULT 	0x1112 /* AR5211 (no eeprom) */
52#define PCI_DEVICE_ID_ATHEROS_AR5212_FPGA 	0xf013 /* AR5212 (emulation board) */
53#define PCI_DEVICE_ID_ATHEROS_AR5211_LEGACY 	0xff12 /* AR5211 (emulation board) */
54#define PCI_DEVICE_ID_ATHEROS_AR5211_FPGA11B 	0xf11b /* AR5211 (emulation board) */
55#define PCI_DEVICE_ID_ATHEROS_AR5312_REV2 	0x0052 /* AR5312 WMAC (AP31) */
56#define PCI_DEVICE_ID_ATHEROS_AR5312_REV7 	0x0057 /* AR5312 WMAC (AP30-040) */
57#define PCI_DEVICE_ID_ATHEROS_AR5312_REV8 	0x0058 /* AR5312 WMAC (AP43-030) */
58#define PCI_DEVICE_ID_ATHEROS_AR5212_0014 	0x0014 /* AR5212 compatible */
59#define PCI_DEVICE_ID_ATHEROS_AR5212_0015 	0x0015 /* AR5212 compatible */
60#define PCI_DEVICE_ID_ATHEROS_AR5212_0016 	0x0016 /* AR5212 compatible */
61#define PCI_DEVICE_ID_ATHEROS_AR5212_0017 	0x0017 /* AR5212 compatible */
62#define PCI_DEVICE_ID_ATHEROS_AR5212_0018 	0x0018 /* AR5212 compatible */
63#define PCI_DEVICE_ID_ATHEROS_AR5212_0019 	0x0019 /* AR5212 compatible */
64#define PCI_DEVICE_ID_ATHEROS_AR2413 		0x001a /* AR2413 (Griffin-lite) */
65#define PCI_DEVICE_ID_ATHEROS_AR5413 		0x001b /* AR5413 (Eagle) */
66#define PCI_DEVICE_ID_ATHEROS_AR5424 		0x001c /* AR5424 (Condor PCI-E) */
67#define PCI_DEVICE_ID_ATHEROS_AR5416 		0x0023 /* AR5416 */
68#define PCI_DEVICE_ID_ATHEROS_AR5418 		0x0024 /* AR5418 */
69
70/****************************\
71  GENERIC DRIVER DEFINITIONS
72\****************************/
73
74#define ATH5K_PRINTF(fmt, ...)   printk("%s: " fmt, __func__, ##__VA_ARGS__)
75
76#define ATH5K_PRINTK(_sc, _level, _fmt, ...) \
77	printk(_level "ath5k %s: " _fmt, \
78		((_sc) && (_sc)->hw) ? wiphy_name((_sc)->hw->wiphy) : "", \
79		##__VA_ARGS__)
80
81#define ATH5K_PRINTK_LIMIT(_sc, _level, _fmt, ...) do { \
82	if (net_ratelimit()) \
83		ATH5K_PRINTK(_sc, _level, _fmt, ##__VA_ARGS__); \
84	} while (0)
85
86#define ATH5K_INFO(_sc, _fmt, ...) \
87	ATH5K_PRINTK(_sc, KERN_INFO, _fmt, ##__VA_ARGS__)
88
89#define ATH5K_WARN(_sc, _fmt, ...) \
90	ATH5K_PRINTK_LIMIT(_sc, KERN_WARNING, _fmt, ##__VA_ARGS__)
91
92#define ATH5K_ERR(_sc, _fmt, ...) \
93	ATH5K_PRINTK_LIMIT(_sc, KERN_ERR, _fmt, ##__VA_ARGS__)
94
95/*
96 * AR5K REGISTER ACCESS
97 */
98
99/* Some macros to read/write fields */
100
101/* First shift, then mask */
102#define AR5K_REG_SM(_val, _flags)					\
103	(((_val) << _flags##_S) & (_flags))
104
105/* First mask, then shift */
106#define AR5K_REG_MS(_val, _flags)					\
107	(((_val) & (_flags)) >> _flags##_S)
108
109/* Some registers can hold multiple values of interest. For this
110 * reason when we want to write to these registers we must first
111 * retrieve the values which we do not want to clear (lets call this
112 * old_data) and then set the register with this and our new_value:
113 * ( old_data | new_value) */
114#define AR5K_REG_WRITE_BITS(ah, _reg, _flags, _val)			\
115	ath5k_hw_reg_write(ah, (ath5k_hw_reg_read(ah, _reg) & ~(_flags)) | \
116	    (((_val) << _flags##_S) & (_flags)), _reg)
117
118#define AR5K_REG_MASKED_BITS(ah, _reg, _flags, _mask)			\
119	ath5k_hw_reg_write(ah, (ath5k_hw_reg_read(ah, _reg) &		\
120			(_mask)) | (_flags), _reg)
121
122#define AR5K_REG_ENABLE_BITS(ah, _reg, _flags)				\
123	ath5k_hw_reg_write(ah, ath5k_hw_reg_read(ah, _reg) | (_flags), _reg)
124
125#define AR5K_REG_DISABLE_BITS(ah, _reg, _flags)			\
126	ath5k_hw_reg_write(ah, ath5k_hw_reg_read(ah, _reg) & ~(_flags), _reg)
127
128/* Access to PHY registers */
129#define AR5K_PHY_READ(ah, _reg)					\
130	ath5k_hw_reg_read(ah, (ah)->ah_phy + ((_reg) << 2))
131
132#define AR5K_PHY_WRITE(ah, _reg, _val)					\
133	ath5k_hw_reg_write(ah, _val, (ah)->ah_phy + ((_reg) << 2))
134
135/* Access QCU registers per queue */
136#define AR5K_REG_READ_Q(ah, _reg, _queue)				\
137	(ath5k_hw_reg_read(ah, _reg) & (1 << _queue))			\
138
139#define AR5K_REG_WRITE_Q(ah, _reg, _queue)				\
140	ath5k_hw_reg_write(ah, (1 << _queue), _reg)
141
142#define AR5K_Q_ENABLE_BITS(_reg, _queue) do {				\
143	_reg |= 1 << _queue;						\
144} while (0)
145
146#define AR5K_Q_DISABLE_BITS(_reg, _queue) do {				\
147	_reg &= ~(1 << _queue);						\
148} while (0)
149
150/* Used while writing initvals */
151#define AR5K_REG_WAIT(_i) do {						\
152	if (_i % 64)							\
153		udelay(1);						\
154} while (0)
155
156/* Register dumps are done per operation mode */
157#define AR5K_INI_RFGAIN_5GHZ		0
158#define AR5K_INI_RFGAIN_2GHZ		1
159
160/* TODO: Clean this up */
161#define AR5K_INI_VAL_11A		0
162#define AR5K_INI_VAL_11A_TURBO		1
163#define AR5K_INI_VAL_11B		2
164#define AR5K_INI_VAL_11G		3
165#define AR5K_INI_VAL_11G_TURBO		4
166#define AR5K_INI_VAL_XR			0
167#define AR5K_INI_VAL_MAX		5
168
169/*
170 * Some tuneable values (these should be changeable by the user)
171 * TODO: Make use of them and add more options OR use debug/configfs
172 */
173#define AR5K_TUNE_DMA_BEACON_RESP		2
174#define AR5K_TUNE_SW_BEACON_RESP		10
175#define AR5K_TUNE_ADDITIONAL_SWBA_BACKOFF	0
176#define AR5K_TUNE_RADAR_ALERT			false
177#define AR5K_TUNE_MIN_TX_FIFO_THRES		1
178#define AR5K_TUNE_MAX_TX_FIFO_THRES		((IEEE80211_MAX_LEN / 64) + 1)
179#define AR5K_TUNE_REGISTER_TIMEOUT		20000
180/* Register for RSSI threshold has a mask of 0xff, so 255 seems to
181 * be the max value. */
182#define AR5K_TUNE_RSSI_THRES			129
183/* This must be set when setting the RSSI threshold otherwise it can
184 * prevent a reset. If AR5K_RSSI_THR is read after writing to it
185 * the BMISS_THRES will be seen as 0, seems harware doesn't keep
186 * track of it. Max value depends on harware. For AR5210 this is just 7.
187 * For AR5211+ this seems to be up to 255. */
188#define AR5K_TUNE_BMISS_THRES			7
189#define AR5K_TUNE_REGISTER_DWELL_TIME		20000
190#define AR5K_TUNE_BEACON_INTERVAL		100
191#define AR5K_TUNE_AIFS				2
192#define AR5K_TUNE_AIFS_11B			2
193#define AR5K_TUNE_AIFS_XR			0
194#define AR5K_TUNE_CWMIN				15
195#define AR5K_TUNE_CWMIN_11B			31
196#define AR5K_TUNE_CWMIN_XR			3
197#define AR5K_TUNE_CWMAX				1023
198#define AR5K_TUNE_CWMAX_11B			1023
199#define AR5K_TUNE_CWMAX_XR			7
200#define AR5K_TUNE_NOISE_FLOOR			-72
201#define AR5K_TUNE_CCA_MAX_GOOD_VALUE		-95
202#define AR5K_TUNE_MAX_TXPOWER			63
203#define AR5K_TUNE_DEFAULT_TXPOWER		25
204#define AR5K_TUNE_TPC_TXPOWER			false
205#define AR5K_TUNE_HWTXTRIES			4
206
207#define AR5K_INIT_CARR_SENSE_EN			1
208
209/*Swap RX/TX Descriptor for big endian archs*/
210#if defined(__BIG_ENDIAN)
211#define AR5K_INIT_CFG	(		\
212	AR5K_CFG_SWTD | AR5K_CFG_SWRD	\
213)
214#else
215#define AR5K_INIT_CFG	0x00000000
216#endif
217
218/* Initial values */
219#define	AR5K_INIT_CYCRSSI_THR1			2
220#define AR5K_INIT_TX_LATENCY			502
221#define AR5K_INIT_USEC				39
222#define AR5K_INIT_USEC_TURBO			79
223#define AR5K_INIT_USEC_32			31
224#define AR5K_INIT_SLOT_TIME			396
225#define AR5K_INIT_SLOT_TIME_TURBO		480
226#define AR5K_INIT_ACK_CTS_TIMEOUT		1024
227#define AR5K_INIT_ACK_CTS_TIMEOUT_TURBO		0x08000800
228#define AR5K_INIT_PROG_IFS			920
229#define AR5K_INIT_PROG_IFS_TURBO		960
230#define AR5K_INIT_EIFS				3440
231#define AR5K_INIT_EIFS_TURBO			6880
232#define AR5K_INIT_SIFS				560
233#define AR5K_INIT_SIFS_TURBO			480
234#define AR5K_INIT_SH_RETRY			10
235#define AR5K_INIT_LG_RETRY			AR5K_INIT_SH_RETRY
236#define AR5K_INIT_SSH_RETRY			32
237#define AR5K_INIT_SLG_RETRY			AR5K_INIT_SSH_RETRY
238#define AR5K_INIT_TX_RETRY			10
239
240#define AR5K_INIT_TRANSMIT_LATENCY		(			\
241	(AR5K_INIT_TX_LATENCY << 14) | (AR5K_INIT_USEC_32 << 7) |	\
242	(AR5K_INIT_USEC)						\
243)
244#define AR5K_INIT_TRANSMIT_LATENCY_TURBO	(			\
245	(AR5K_INIT_TX_LATENCY << 14) | (AR5K_INIT_USEC_32 << 7) |	\
246	(AR5K_INIT_USEC_TURBO)						\
247)
248#define AR5K_INIT_PROTO_TIME_CNTRL		(			\
249	(AR5K_INIT_CARR_SENSE_EN << 26) | (AR5K_INIT_EIFS << 12) |	\
250	(AR5K_INIT_PROG_IFS)						\
251)
252#define AR5K_INIT_PROTO_TIME_CNTRL_TURBO	(			\
253	(AR5K_INIT_CARR_SENSE_EN << 26) | (AR5K_INIT_EIFS_TURBO << 12) | \
254	(AR5K_INIT_PROG_IFS_TURBO)					\
255)
256
257/* token to use for aifs, cwmin, cwmax in MadWiFi */
258#define	AR5K_TXQ_USEDEFAULT	((u32) -1)
259
260/* GENERIC CHIPSET DEFINITIONS */
261
262/* MAC Chips */
263enum ath5k_version {
264	AR5K_AR5210	= 0,
265	AR5K_AR5211	= 1,
266	AR5K_AR5212	= 2,
267};
268
269/* PHY Chips */
270enum ath5k_radio {
271	AR5K_RF5110	= 0,
272	AR5K_RF5111	= 1,
273	AR5K_RF5112	= 2,
274	AR5K_RF2413	= 3,
275	AR5K_RF5413	= 4,
276	AR5K_RF2316	= 5,
277	AR5K_RF2317	= 6,
278	AR5K_RF2425	= 7,
279};
280
281/*
282 * Common silicon revision/version values
283 */
284
285enum ath5k_srev_type {
286	AR5K_VERSION_MAC,
287	AR5K_VERSION_RAD,
288};
289
290struct ath5k_srev_name {
291	const char		*sr_name;
292	enum ath5k_srev_type	sr_type;
293	u_int			sr_val;
294};
295
296#define AR5K_SREV_UNKNOWN	0xffff
297
298#define AR5K_SREV_AR5210	0x00 /* Crete */
299#define AR5K_SREV_AR5311	0x10 /* Maui 1 */
300#define AR5K_SREV_AR5311A	0x20 /* Maui 2 */
301#define AR5K_SREV_AR5311B	0x30 /* Spirit */
302#define AR5K_SREV_AR5211	0x40 /* Oahu */
303#define AR5K_SREV_AR5212	0x50 /* Venice */
304#define AR5K_SREV_AR5212_V4	0x54 /* ??? */
305#define AR5K_SREV_AR5213	0x55 /* ??? */
306#define AR5K_SREV_AR5213A	0x59 /* Hainan */
307#define AR5K_SREV_AR2413	0x78 /* Griffin lite */
308#define AR5K_SREV_AR2414	0x70 /* Griffin */
309#define AR5K_SREV_AR5424	0x90 /* Condor */
310#define AR5K_SREV_AR5413	0xa4 /* Eagle lite */
311#define AR5K_SREV_AR5414	0xa0 /* Eagle */
312#define AR5K_SREV_AR2415	0xb0 /* Talon */
313#define AR5K_SREV_AR5416	0xc0 /* PCI-E */
314#define AR5K_SREV_AR5418	0xca /* PCI-E */
315#define AR5K_SREV_AR2425	0xe0 /* Swan */
316#define AR5K_SREV_AR2417	0xf0 /* Nala */
317
318#define AR5K_SREV_RAD_5110	0x00
319#define AR5K_SREV_RAD_5111	0x10
320#define AR5K_SREV_RAD_5111A	0x15
321#define AR5K_SREV_RAD_2111	0x20
322#define AR5K_SREV_RAD_5112	0x30
323#define AR5K_SREV_RAD_5112A	0x35
324#define	AR5K_SREV_RAD_5112B	0x36
325#define AR5K_SREV_RAD_2112	0x40
326#define AR5K_SREV_RAD_2112A	0x45
327#define	AR5K_SREV_RAD_2112B	0x46
328#define AR5K_SREV_RAD_2413	0x50
329#define AR5K_SREV_RAD_5413	0x60
330#define AR5K_SREV_RAD_2316	0x70 /* Cobra SoC */
331#define AR5K_SREV_RAD_2317	0x80
332#define AR5K_SREV_RAD_5424	0xa0 /* Mostly same as 5413 */
333#define AR5K_SREV_RAD_2425	0xa2
334#define AR5K_SREV_RAD_5133	0xc0
335
336#define AR5K_SREV_PHY_5211	0x30
337#define AR5K_SREV_PHY_5212	0x41
338#define	AR5K_SREV_PHY_5212A	0x42
339#define AR5K_SREV_PHY_5212B	0x43
340#define AR5K_SREV_PHY_2413	0x45
341#define AR5K_SREV_PHY_5413	0x61
342#define AR5K_SREV_PHY_2425	0x70
343
344/* IEEE defs */
345#define IEEE80211_MAX_LEN       2500
346
347/* TODO add support to mac80211 for vendor-specific rates and modes */
348
349/*
350 * Some of this information is based on Documentation from:
351 *
352 * http://madwifi.org/wiki/ChipsetFeatures/SuperAG
353 *
354 * Modulation for Atheros' eXtended Range - range enhancing extension that is
355 * supposed to double the distance an Atheros client device can keep a
356 * connection with an Atheros access point. This is achieved by increasing
357 * the receiver sensitivity up to, -105dBm, which is about 20dB above what
358 * the 802.11 specifications demand. In addition, new (proprietary) data rates
359 * are introduced: 3, 2, 1, 0.5 and 0.25 MBit/s.
360 *
361 * Please note that can you either use XR or TURBO but you cannot use both,
362 * they are exclusive.
363 *
364 */
365#define MODULATION_XR 		0x00000200
366/*
367 * Modulation for Atheros' Turbo G and Turbo A, its supposed to provide a
368 * throughput transmission speed up to 40Mbit/s-60Mbit/s at a 108Mbit/s
369 * signaling rate achieved through the bonding of two 54Mbit/s 802.11g
370 * channels. To use this feature your Access Point must also suport it.
371 * There is also a distinction between "static" and "dynamic" turbo modes:
372 *
373 * - Static: is the dumb version: devices set to this mode stick to it until
374 *     the mode is turned off.
375 * - Dynamic: is the intelligent version, the network decides itself if it
376 *     is ok to use turbo. As soon as traffic is detected on adjacent channels
377 *     (which would get used in turbo mode), or when a non-turbo station joins
378 *     the network, turbo mode won't be used until the situation changes again.
379 *     Dynamic mode is achieved by Atheros' Adaptive Radio (AR) feature which
380 *     monitors the used radio band in order to decide whether turbo mode may
381 *     be used or not.
382 *
383 * This article claims Super G sticks to bonding of channels 5 and 6 for
384 * USA:
385 *
386 * http://www.pcworld.com/article/id,113428-page,1/article.html
387 *
388 * The channel bonding seems to be driver specific though. In addition to
389 * deciding what channels will be used, these "Turbo" modes are accomplished
390 * by also enabling the following features:
391 *
392 * - Bursting: allows multiple frames to be sent at once, rather than pausing
393 *     after each frame. Bursting is a standards-compliant feature that can be
394 *     used with any Access Point.
395 * - Fast frames: increases the amount of information that can be sent per
396 *     frame, also resulting in a reduction of transmission overhead. It is a
397 *     proprietary feature that needs to be supported by the Access Point.
398 * - Compression: data frames are compressed in real time using a Lempel Ziv
399 *     algorithm. This is done transparently. Once this feature is enabled,
400 *     compression and decompression takes place inside the chipset, without
401 *     putting additional load on the host CPU.
402 *
403 */
404#define MODULATION_TURBO	0x00000080
405
406enum ath5k_driver_mode {
407	AR5K_MODE_11A		=	0,
408	AR5K_MODE_11A_TURBO	=	1,
409	AR5K_MODE_11B		=	2,
410	AR5K_MODE_11G		=	3,
411	AR5K_MODE_11G_TURBO	=	4,
412	AR5K_MODE_XR		=	0,
413	AR5K_MODE_MAX		=	5
414};
415
416enum ath5k_ant_mode {
417	AR5K_ANTMODE_DEFAULT	= 0,	/* default antenna setup */
418	AR5K_ANTMODE_FIXED_A	= 1,	/* only antenna A is present */
419	AR5K_ANTMODE_FIXED_B	= 2,	/* only antenna B is present */
420	AR5K_ANTMODE_SINGLE_AP	= 3,	/* sta locked on a single ap */
421	AR5K_ANTMODE_SECTOR_AP	= 4,	/* AP with tx antenna set on tx desc */
422	AR5K_ANTMODE_SECTOR_STA	= 5,	/* STA with tx antenna set on tx desc */
423	AR5K_ANTMODE_DEBUG	= 6,	/* Debug mode -A -> Rx, B-> Tx- */
424	AR5K_ANTMODE_MAX,
425};
426
427
428/****************\
429  TX DEFINITIONS
430\****************/
431
432/*
433 * TX Status descriptor
434 */
435struct ath5k_tx_status {
436	u16	ts_seqnum;
437	u16	ts_tstamp;
438	u8	ts_status;
439	u8	ts_rate[4];
440	u8	ts_retry[4];
441	u8	ts_final_idx;
442	s8	ts_rssi;
443	u8	ts_shortretry;
444	u8	ts_longretry;
445	u8	ts_virtcol;
446	u8	ts_antenna;
447};
448
449#define AR5K_TXSTAT_ALTRATE	0x80
450#define AR5K_TXERR_XRETRY	0x01
451#define AR5K_TXERR_FILT		0x02
452#define AR5K_TXERR_FIFO		0x04
453
454/**
455 * enum ath5k_tx_queue - Queue types used to classify tx queues.
456 * @AR5K_TX_QUEUE_INACTIVE: q is unused -- see ath5k_hw_release_tx_queue
457 * @AR5K_TX_QUEUE_DATA: A normal data queue
458 * @AR5K_TX_QUEUE_XR_DATA: An XR-data queue
459 * @AR5K_TX_QUEUE_BEACON: The beacon queue
460 * @AR5K_TX_QUEUE_CAB: The after-beacon queue
461 * @AR5K_TX_QUEUE_UAPSD: Unscheduled Automatic Power Save Delivery queue
462 */
463enum ath5k_tx_queue {
464	AR5K_TX_QUEUE_INACTIVE = 0,
465	AR5K_TX_QUEUE_DATA,
466	AR5K_TX_QUEUE_XR_DATA,
467	AR5K_TX_QUEUE_BEACON,
468	AR5K_TX_QUEUE_CAB,
469	AR5K_TX_QUEUE_UAPSD,
470};
471
472#define	AR5K_NUM_TX_QUEUES		10
473#define	AR5K_NUM_TX_QUEUES_NOQCU	2
474
475/*
476 * Queue syb-types to classify normal data queues.
477 * These are the 4 Access Categories as defined in
478 * WME spec. 0 is the lowest priority and 4 is the
479 * highest. Normal data that hasn't been classified
480 * goes to the Best Effort AC.
481 */
482enum ath5k_tx_queue_subtype {
483	AR5K_WME_AC_BK = 0,	/*Background traffic*/
484	AR5K_WME_AC_BE, 	/*Best-effort (normal) traffic)*/
485	AR5K_WME_AC_VI, 	/*Video traffic*/
486	AR5K_WME_AC_VO, 	/*Voice traffic*/
487};
488
489/*
490 * Queue ID numbers as returned by the hw functions, each number
491 * represents a hw queue. If hw does not support hw queues
492 * (eg 5210) all data goes in one queue. These match
493 * d80211 definitions (net80211/MadWiFi don't use them).
494 */
495enum ath5k_tx_queue_id {
496	AR5K_TX_QUEUE_ID_NOQCU_DATA	= 0,
497	AR5K_TX_QUEUE_ID_NOQCU_BEACON	= 1,
498	AR5K_TX_QUEUE_ID_DATA_MIN	= 0, /*IEEE80211_TX_QUEUE_DATA0*/
499	AR5K_TX_QUEUE_ID_DATA_MAX	= 4, /*IEEE80211_TX_QUEUE_DATA4*/
500	AR5K_TX_QUEUE_ID_DATA_SVP	= 5, /*IEEE80211_TX_QUEUE_SVP - Spectralink Voice Protocol*/
501	AR5K_TX_QUEUE_ID_CAB		= 6, /*IEEE80211_TX_QUEUE_AFTER_BEACON*/
502	AR5K_TX_QUEUE_ID_BEACON		= 7, /*IEEE80211_TX_QUEUE_BEACON*/
503	AR5K_TX_QUEUE_ID_UAPSD		= 8,
504	AR5K_TX_QUEUE_ID_XR_DATA	= 9,
505};
506
507/*
508 * Flags to set hw queue's parameters...
509 */
510#define AR5K_TXQ_FLAG_TXOKINT_ENABLE		0x0001	/* Enable TXOK interrupt */
511#define AR5K_TXQ_FLAG_TXERRINT_ENABLE		0x0002	/* Enable TXERR interrupt */
512#define AR5K_TXQ_FLAG_TXEOLINT_ENABLE		0x0004	/* Enable TXEOL interrupt -not used- */
513#define AR5K_TXQ_FLAG_TXDESCINT_ENABLE		0x0008	/* Enable TXDESC interrupt -not used- */
514#define AR5K_TXQ_FLAG_TXURNINT_ENABLE		0x0010	/* Enable TXURN interrupt */
515#define AR5K_TXQ_FLAG_CBRORNINT_ENABLE		0x0020	/* Enable CBRORN interrupt */
516#define AR5K_TXQ_FLAG_CBRURNINT_ENABLE		0x0040	/* Enable CBRURN interrupt */
517#define AR5K_TXQ_FLAG_QTRIGINT_ENABLE		0x0080	/* Enable QTRIG interrupt */
518#define AR5K_TXQ_FLAG_TXNOFRMINT_ENABLE		0x0100	/* Enable TXNOFRM interrupt */
519#define AR5K_TXQ_FLAG_BACKOFF_DISABLE		0x0200	/* Disable random post-backoff */
520#define AR5K_TXQ_FLAG_RDYTIME_EXP_POLICY_ENABLE	0x0300	/* Enable ready time expiry policy (?)*/
521#define AR5K_TXQ_FLAG_FRAG_BURST_BACKOFF_ENABLE	0x0800	/* Enable backoff while bursting */
522#define AR5K_TXQ_FLAG_POST_FR_BKOFF_DIS		0x1000	/* Disable backoff while bursting */
523#define AR5K_TXQ_FLAG_COMPRESSION_ENABLE	0x2000	/* Enable hw compression -not implemented-*/
524
525/*
526 * A struct to hold tx queue's parameters
527 */
528struct ath5k_txq_info {
529	enum ath5k_tx_queue tqi_type;
530	enum ath5k_tx_queue_subtype tqi_subtype;
531	u16	tqi_flags;	/* Tx queue flags (see above) */
532	u32	tqi_aifs;	/* Arbitrated Interframe Space */
533	s32	tqi_cw_min;	/* Minimum Contention Window */
534	s32	tqi_cw_max;	/* Maximum Contention Window */
535	u32	tqi_cbr_period; /* Constant bit rate period */
536	u32	tqi_cbr_overflow_limit;
537	u32	tqi_burst_time;
538	u32	tqi_ready_time; /* Not used */
539};
540
541/*
542 * Transmit packet types.
543 * used on tx control descriptor
544 * TODO: Use them inside base.c corectly
545 */
546enum ath5k_pkt_type {
547	AR5K_PKT_TYPE_NORMAL		= 0,
548	AR5K_PKT_TYPE_ATIM		= 1,
549	AR5K_PKT_TYPE_PSPOLL		= 2,
550	AR5K_PKT_TYPE_BEACON		= 3,
551	AR5K_PKT_TYPE_PROBE_RESP	= 4,
552	AR5K_PKT_TYPE_PIFS		= 5,
553};
554
555/*
556 * TX power and TPC settings
557 */
558#define AR5K_TXPOWER_OFDM(_r, _v)	(			\
559	((0 & 1) << ((_v) + 6)) |				\
560	(((ah->ah_txpower.txp_rates_power_table[(_r)]) & 0x3f) << (_v))	\
561)
562
563#define AR5K_TXPOWER_CCK(_r, _v)	(			\
564	(ah->ah_txpower.txp_rates_power_table[(_r)] & 0x3f) << (_v)	\
565)
566
567/*
568 * DMA size definitions (2^n+2)
569 */
570enum ath5k_dmasize {
571	AR5K_DMASIZE_4B	= 0,
572	AR5K_DMASIZE_8B,
573	AR5K_DMASIZE_16B,
574	AR5K_DMASIZE_32B,
575	AR5K_DMASIZE_64B,
576	AR5K_DMASIZE_128B,
577	AR5K_DMASIZE_256B,
578	AR5K_DMASIZE_512B
579};
580
581
582/****************\
583  RX DEFINITIONS
584\****************/
585
586/*
587 * RX Status descriptor
588 */
589struct ath5k_rx_status {
590	u16	rs_datalen;
591	u16	rs_tstamp;
592	u8	rs_status;
593	u8	rs_phyerr;
594	s8	rs_rssi;
595	u8	rs_keyix;
596	u8	rs_rate;
597	u8	rs_antenna;
598	u8	rs_more;
599};
600
601#define AR5K_RXERR_CRC		0x01
602#define AR5K_RXERR_PHY		0x02
603#define AR5K_RXERR_FIFO		0x04
604#define AR5K_RXERR_DECRYPT	0x08
605#define AR5K_RXERR_MIC		0x10
606#define AR5K_RXKEYIX_INVALID	((u8) - 1)
607#define AR5K_TXKEYIX_INVALID	((u32) - 1)
608
609
610/**************************\
611 BEACON TIMERS DEFINITIONS
612\**************************/
613
614#define AR5K_BEACON_PERIOD	0x0000ffff
615#define AR5K_BEACON_ENA		0x00800000 /*enable beacon xmit*/
616#define AR5K_BEACON_RESET_TSF	0x01000000 /*force a TSF reset*/
617
618#if 0
619/**
620 * struct ath5k_beacon_state - Per-station beacon timer state.
621 * @bs_interval: in TU's, can also include the above flags
622 * @bs_cfp_max_duration: if non-zero hw is setup to coexist with a
623 * 	Point Coordination Function capable AP
624 */
625struct ath5k_beacon_state {
626	u32	bs_next_beacon;
627	u32	bs_next_dtim;
628	u32	bs_interval;
629	u8	bs_dtim_period;
630	u8	bs_cfp_period;
631	u16	bs_cfp_max_duration;
632	u16	bs_cfp_du_remain;
633	u16	bs_tim_offset;
634	u16	bs_sleep_duration;
635	u16	bs_bmiss_threshold;
636	u32  	bs_cfp_next;
637};
638#endif
639
640
641/*
642 * TSF to TU conversion:
643 *
644 * TSF is a 64bit value in usec (microseconds).
645 * TU is a 32bit value and defined by IEEE802.11 (page 6) as "A measurement of
646 * time equal to 1024 usec", so it's roughly milliseconds (usec / 1024).
647 */
648#define TSF_TO_TU(_tsf) (u32)((_tsf) >> 10)
649
650
651/*******************************\
652  GAIN OPTIMIZATION DEFINITIONS
653\*******************************/
654
655enum ath5k_rfgain {
656	AR5K_RFGAIN_INACTIVE = 0,
657	AR5K_RFGAIN_ACTIVE,
658	AR5K_RFGAIN_READ_REQUESTED,
659	AR5K_RFGAIN_NEED_CHANGE,
660};
661
662struct ath5k_gain {
663	u8			g_step_idx;
664	u8			g_current;
665	u8			g_target;
666	u8			g_low;
667	u8			g_high;
668	u8			g_f_corr;
669	u8			g_state;
670};
671
672/********************\
673  COMMON DEFINITIONS
674\********************/
675
676#define AR5K_SLOT_TIME_9	396
677#define AR5K_SLOT_TIME_20	880
678#define AR5K_SLOT_TIME_MAX	0xffff
679
680/* channel_flags */
681#define	CHANNEL_CW_INT	0x0008	/* Contention Window interference detected */
682#define	CHANNEL_TURBO	0x0010	/* Turbo Channel */
683#define	CHANNEL_CCK	0x0020	/* CCK channel */
684#define	CHANNEL_OFDM	0x0040	/* OFDM channel */
685#define	CHANNEL_2GHZ	0x0080	/* 2GHz channel. */
686#define	CHANNEL_5GHZ	0x0100	/* 5GHz channel */
687#define	CHANNEL_PASSIVE	0x0200	/* Only passive scan allowed */
688#define	CHANNEL_DYN	0x0400	/* Dynamic CCK-OFDM channel (for g operation) */
689#define	CHANNEL_XR	0x0800	/* XR channel */
690
691#define	CHANNEL_A	(CHANNEL_5GHZ|CHANNEL_OFDM)
692#define	CHANNEL_B	(CHANNEL_2GHZ|CHANNEL_CCK)
693#define	CHANNEL_G	(CHANNEL_2GHZ|CHANNEL_OFDM)
694#define	CHANNEL_T	(CHANNEL_5GHZ|CHANNEL_OFDM|CHANNEL_TURBO)
695#define	CHANNEL_TG	(CHANNEL_2GHZ|CHANNEL_OFDM|CHANNEL_TURBO)
696#define	CHANNEL_108A	CHANNEL_T
697#define	CHANNEL_108G	CHANNEL_TG
698#define	CHANNEL_X	(CHANNEL_5GHZ|CHANNEL_OFDM|CHANNEL_XR)
699
700#define	CHANNEL_ALL 	(CHANNEL_OFDM|CHANNEL_CCK|CHANNEL_2GHZ|CHANNEL_5GHZ| \
701		CHANNEL_TURBO)
702
703#define	CHANNEL_ALL_NOTURBO 	(CHANNEL_ALL & ~CHANNEL_TURBO)
704#define CHANNEL_MODES		CHANNEL_ALL
705
706/*
707 * Used internaly for reset_tx_queue).
708 * Also see struct struct ieee80211_channel.
709 */
710#define IS_CHAN_XR(_c)	((_c->hw_value & CHANNEL_XR) != 0)
711#define IS_CHAN_B(_c)	((_c->hw_value & CHANNEL_B) != 0)
712
713/*
714 * The following structure is used to map 2GHz channels to
715 * 5GHz Atheros channels.
716 * TODO: Clean up
717 */
718struct ath5k_athchan_2ghz {
719	u32	a2_flags;
720	u16	a2_athchan;
721};
722
723
724/******************\
725  RATE DEFINITIONS
726\******************/
727
728/**
729 * Seems the ar5xxx harware supports up to 32 rates, indexed by 1-32.
730 *
731 * The rate code is used to get the RX rate or set the TX rate on the
732 * hardware descriptors. It is also used for internal modulation control
733 * and settings.
734 *
735 * This is the hardware rate map we are aware of:
736 *
737 * rate_code   0x01    0x02    0x03    0x04    0x05    0x06    0x07    0x08
738 * rate_kbps   3000    1000    ?       ?       ?       2000    500     48000
739 *
740 * rate_code   0x09    0x0A    0x0B    0x0C    0x0D    0x0E    0x0F    0x10
741 * rate_kbps   24000   12000   6000    54000   36000   18000   9000    ?
742 *
743 * rate_code   17      18      19      20      21      22      23      24
744 * rate_kbps   ?       ?       ?       ?       ?       ?       ?       11000
745 *
746 * rate_code   25      26      27      28      29      30      31      32
747 * rate_kbps   5500    2000    1000    11000S  5500S   2000S   ?       ?
748 *
749 * "S" indicates CCK rates with short preamble.
750 *
751 * AR5211 has different rate codes for CCK (802.11B) rates. It only uses the
752 * lowest 4 bits, so they are the same as below with a 0xF mask.
753 * (0xB, 0xA, 0x9 and 0x8 for 1M, 2M, 5.5M and 11M).
754 * We handle this in ath5k_setup_bands().
755 */
756#define AR5K_MAX_RATES 32
757
758/* B */
759#define ATH5K_RATE_CODE_1M	0x1B
760#define ATH5K_RATE_CODE_2M	0x1A
761#define ATH5K_RATE_CODE_5_5M	0x19
762#define ATH5K_RATE_CODE_11M	0x18
763/* A and G */
764#define ATH5K_RATE_CODE_6M	0x0B
765#define ATH5K_RATE_CODE_9M	0x0F
766#define ATH5K_RATE_CODE_12M	0x0A
767#define ATH5K_RATE_CODE_18M	0x0E
768#define ATH5K_RATE_CODE_24M	0x09
769#define ATH5K_RATE_CODE_36M	0x0D
770#define ATH5K_RATE_CODE_48M	0x08
771#define ATH5K_RATE_CODE_54M	0x0C
772/* XR */
773#define ATH5K_RATE_CODE_XR_500K	0x07
774#define ATH5K_RATE_CODE_XR_1M	0x02
775#define ATH5K_RATE_CODE_XR_2M	0x06
776#define ATH5K_RATE_CODE_XR_3M	0x01
777
778/* adding this flag to rate_code enables short preamble */
779#define AR5K_SET_SHORT_PREAMBLE 0x04
780
781/*
782 * Crypto definitions
783 */
784
785#define AR5K_KEYCACHE_SIZE	8
786
787/***********************\
788 HW RELATED DEFINITIONS
789\***********************/
790
791/*
792 * Misc definitions
793 */
794#define	AR5K_RSSI_EP_MULTIPLIER	(1<<7)
795
796#define AR5K_ASSERT_ENTRY(_e, _s) do {		\
797	if (_e >= _s)				\
798		return (false);			\
799} while (0)
800
801/*
802 * Hardware interrupt abstraction
803 */
804
805/**
806 * enum ath5k_int - Hardware interrupt masks helpers
807 *
808 * @AR5K_INT_RX: mask to identify received frame interrupts, of type
809 * 	AR5K_ISR_RXOK or AR5K_ISR_RXERR
810 * @AR5K_INT_RXDESC: Request RX descriptor/Read RX descriptor (?)
811 * @AR5K_INT_RXNOFRM: No frame received (?)
812 * @AR5K_INT_RXEOL: received End Of List for VEOL (Virtual End Of List). The
813 * 	Queue Control Unit (QCU) signals an EOL interrupt only if a descriptor's
814 * 	LinkPtr is NULL. For more details, refer to:
815 * 	http://www.freepatentsonline.com/20030225739.html
816 * @AR5K_INT_RXORN: Indicates we got RX overrun (eg. no more descriptors).
817 * 	Note that Rx overrun is not always fatal, on some chips we can continue
818 * 	operation without reseting the card, that's why int_fatal is not
819 * 	common for all chips.
820 * @AR5K_INT_TX: mask to identify received frame interrupts, of type
821 * 	AR5K_ISR_TXOK or AR5K_ISR_TXERR
822 * @AR5K_INT_TXDESC: Request TX descriptor/Read TX status descriptor (?)
823 * @AR5K_INT_TXURN: received when we should increase the TX trigger threshold
824 * 	We currently do increments on interrupt by
825 * 	(AR5K_TUNE_MAX_TX_FIFO_THRES - current_trigger_level) / 2
826 * @AR5K_INT_MIB: Indicates the Management Information Base counters should be
827 * 	checked. We should do this with ath5k_hw_update_mib_counters() but
828 * 	it seems we should also then do some noise immunity work.
829 * @AR5K_INT_RXPHY: RX PHY Error
830 * @AR5K_INT_RXKCM: RX Key cache miss
831 * @AR5K_INT_SWBA: SoftWare Beacon Alert - indicates its time to send a
832 * 	beacon that must be handled in software. The alternative is if you
833 * 	have VEOL support, in that case you let the hardware deal with things.
834 * @AR5K_INT_BMISS: If in STA mode this indicates we have stopped seeing
835 * 	beacons from the AP have associated with, we should probably try to
836 * 	reassociate. When in IBSS mode this might mean we have not received
837 * 	any beacons from any local stations. Note that every station in an
838 * 	IBSS schedules to send beacons at the Target Beacon Transmission Time
839 * 	(TBTT) with a random backoff.
840 * @AR5K_INT_BNR: Beacon Not Ready interrupt - ??
841 * @AR5K_INT_GPIO: GPIO interrupt is used for RF Kill, disabled for now
842 * 	until properly handled
843 * @AR5K_INT_FATAL: Fatal errors were encountered, typically caused by DMA
844 * 	errors. These types of errors we can enable seem to be of type
845 * 	AR5K_SIMR2_MCABT, AR5K_SIMR2_SSERR and AR5K_SIMR2_DPERR.
846 * @AR5K_INT_GLOBAL: Used to clear and set the IER
847 * @AR5K_INT_NOCARD: signals the card has been removed
848 * @AR5K_INT_COMMON: common interrupts shared amogst MACs with the same
849 * 	bit value
850 *
851 * These are mapped to take advantage of some common bits
852 * between the MACs, to be able to set intr properties
853 * easier. Some of them are not used yet inside hw.c. Most map
854 * to the respective hw interrupt value as they are common amogst different
855 * MACs.
856 */
857enum ath5k_int {
858	AR5K_INT_RXOK	= 0x00000001,
859	AR5K_INT_RXDESC	= 0x00000002,
860	AR5K_INT_RXERR	= 0x00000004,
861	AR5K_INT_RXNOFRM = 0x00000008,
862	AR5K_INT_RXEOL	= 0x00000010,
863	AR5K_INT_RXORN	= 0x00000020,
864	AR5K_INT_TXOK	= 0x00000040,
865	AR5K_INT_TXDESC	= 0x00000080,
866	AR5K_INT_TXERR	= 0x00000100,
867	AR5K_INT_TXNOFRM = 0x00000200,
868	AR5K_INT_TXEOL	= 0x00000400,
869	AR5K_INT_TXURN	= 0x00000800,
870	AR5K_INT_MIB	= 0x00001000,
871	AR5K_INT_SWI	= 0x00002000,
872	AR5K_INT_RXPHY	= 0x00004000,
873	AR5K_INT_RXKCM	= 0x00008000,
874	AR5K_INT_SWBA	= 0x00010000,
875	AR5K_INT_BRSSI	= 0x00020000,
876	AR5K_INT_BMISS	= 0x00040000,
877	AR5K_INT_FATAL	= 0x00080000, /* Non common */
878	AR5K_INT_BNR	= 0x00100000, /* Non common */
879	AR5K_INT_TIM	= 0x00200000, /* Non common */
880	AR5K_INT_DTIM	= 0x00400000, /* Non common */
881	AR5K_INT_DTIM_SYNC =	0x00800000, /* Non common */
882	AR5K_INT_GPIO	=	0x01000000,
883	AR5K_INT_BCN_TIMEOUT =	0x02000000, /* Non common */
884	AR5K_INT_CAB_TIMEOUT =	0x04000000, /* Non common */
885	AR5K_INT_RX_DOPPLER =	0x08000000, /* Non common */
886	AR5K_INT_QCBRORN =	0x10000000, /* Non common */
887	AR5K_INT_QCBRURN =	0x20000000, /* Non common */
888	AR5K_INT_QTRIG	=	0x40000000, /* Non common */
889	AR5K_INT_GLOBAL =	0x80000000,
890
891	AR5K_INT_COMMON  = AR5K_INT_RXOK
892		| AR5K_INT_RXDESC
893		| AR5K_INT_RXERR
894		| AR5K_INT_RXNOFRM
895		| AR5K_INT_RXEOL
896		| AR5K_INT_RXORN
897		| AR5K_INT_TXOK
898		| AR5K_INT_TXDESC
899		| AR5K_INT_TXERR
900		| AR5K_INT_TXNOFRM
901		| AR5K_INT_TXEOL
902		| AR5K_INT_TXURN
903		| AR5K_INT_MIB
904		| AR5K_INT_SWI
905		| AR5K_INT_RXPHY
906		| AR5K_INT_RXKCM
907		| AR5K_INT_SWBA
908		| AR5K_INT_BRSSI
909		| AR5K_INT_BMISS
910		| AR5K_INT_GPIO
911		| AR5K_INT_GLOBAL,
912
913	AR5K_INT_NOCARD	= 0xffffffff
914};
915
916/* Software interrupts used for calibration */
917enum ath5k_software_interrupt {
918	AR5K_SWI_FULL_CALIBRATION = 0x01,
919	AR5K_SWI_SHORT_CALIBRATION = 0x02,
920};
921
922/*
923 * Power management
924 */
925enum ath5k_power_mode {
926	AR5K_PM_UNDEFINED = 0,
927	AR5K_PM_AUTO,
928	AR5K_PM_AWAKE,
929	AR5K_PM_FULL_SLEEP,
930	AR5K_PM_NETWORK_SLEEP,
931};
932
933/*
934 * These match net80211 definitions (not used in
935 * mac80211).
936 * TODO: Clean this up
937 */
938#define AR5K_LED_INIT	0 /*IEEE80211_S_INIT*/
939#define AR5K_LED_SCAN	1 /*IEEE80211_S_SCAN*/
940#define AR5K_LED_AUTH	2 /*IEEE80211_S_AUTH*/
941#define AR5K_LED_ASSOC	3 /*IEEE80211_S_ASSOC*/
942#define AR5K_LED_RUN	4 /*IEEE80211_S_RUN*/
943
944/* GPIO-controlled software LED */
945#define AR5K_SOFTLED_PIN	0
946#define AR5K_SOFTLED_ON		0
947#define AR5K_SOFTLED_OFF	1
948
949/*
950 * Chipset capabilities -see ath5k_hw_get_capability-
951 * get_capability function is not yet fully implemented
952 * in ath5k so most of these don't work yet...
953 * TODO: Implement these & merge with _TUNE_ stuff above
954 */
955enum ath5k_capability_type {
956	AR5K_CAP_REG_DMN		= 0,	/* Used to get current reg. domain id */
957	AR5K_CAP_TKIP_MIC		= 2,	/* Can handle TKIP MIC in hardware */
958	AR5K_CAP_TKIP_SPLIT		= 3,	/* TKIP uses split keys */
959	AR5K_CAP_PHYCOUNTERS		= 4,	/* PHY error counters */
960	AR5K_CAP_DIVERSITY		= 5,	/* Supports fast diversity */
961	AR5K_CAP_NUM_TXQUEUES		= 6,	/* Used to get max number of hw txqueues */
962	AR5K_CAP_VEOL			= 7,	/* Supports virtual EOL */
963	AR5K_CAP_COMPRESSION		= 8,	/* Supports compression */
964	AR5K_CAP_BURST			= 9,	/* Supports packet bursting */
965	AR5K_CAP_FASTFRAME		= 10,	/* Supports fast frames */
966	AR5K_CAP_TXPOW			= 11,	/* Used to get global tx power limit */
967	AR5K_CAP_TPC			= 12,	/* Can do per-packet tx power control (needed for 802.11a) */
968	AR5K_CAP_BSSIDMASK		= 13,	/* Supports bssid mask */
969	AR5K_CAP_MCAST_KEYSRCH		= 14,	/* Supports multicast key search */
970	AR5K_CAP_TSF_ADJUST		= 15,	/* Supports beacon tsf adjust */
971	AR5K_CAP_XR			= 16,	/* Supports XR mode */
972	AR5K_CAP_WME_TKIPMIC 		= 17,	/* Supports TKIP MIC when using WMM */
973	AR5K_CAP_CHAN_HALFRATE 		= 18,	/* Supports half rate channels */
974	AR5K_CAP_CHAN_QUARTERRATE 	= 19,	/* Supports quarter rate channels */
975	AR5K_CAP_RFSILENT		= 20,	/* Supports RFsilent */
976};
977
978
979/* XXX: we *may* move cap_range stuff to struct wiphy */
980struct ath5k_capabilities {
981	/*
982	 * Supported PHY modes
983	 * (ie. CHANNEL_A, CHANNEL_B, ...)
984	 */
985	DECLARE_BITMAP(cap_mode, AR5K_MODE_MAX);
986
987	/*
988	 * Frequency range (without regulation restrictions)
989	 */
990	struct {
991		u16	range_2ghz_min;
992		u16	range_2ghz_max;
993		u16	range_5ghz_min;
994		u16	range_5ghz_max;
995	} cap_range;
996
997	/*
998	 * Values stored in the EEPROM (some of them...)
999	 */
1000	struct ath5k_eeprom_info	cap_eeprom;
1001
1002	/*
1003	 * Queue information
1004	 */
1005	struct {
1006		u8	q_tx_num;
1007	} cap_queues;
1008};
1009
1010/* size of noise floor history (keep it a power of two) */
1011#define ATH5K_NF_CAL_HIST_MAX	8
1012struct ath5k_nfcal_hist
1013{
1014	s16 index;				/* current index into nfval */
1015	s16 nfval[ATH5K_NF_CAL_HIST_MAX];	/* last few noise floors */
1016};
1017
1018
1019/***************************************\
1020  HARDWARE ABSTRACTION LAYER STRUCTURE
1021\***************************************/
1022
1023/*
1024 * Misc defines
1025 */
1026
1027#define AR5K_MAX_GPIO		10
1028#define AR5K_MAX_RF_BANKS	8
1029
1030/* TODO: Clean up and merge with ath5k_softc */
1031struct ath5k_hw {
1032	u32			ah_magic;
1033	struct ath_common       common;
1034
1035	struct ath5k_softc	*ah_sc;
1036	void __iomem		*ah_iobase;
1037
1038	enum ath5k_int		ah_imr;
1039
1040	enum nl80211_iftype	ah_op_mode;
1041	struct ieee80211_channel *ah_current_channel;
1042	bool			ah_turbo;
1043	bool			ah_calibration;
1044	bool			ah_single_chip;
1045	bool			ah_aes_support;
1046	bool			ah_combined_mic;
1047
1048	enum ath5k_version	ah_version;
1049	enum ath5k_radio	ah_radio;
1050	u32			ah_phy;
1051	u32			ah_mac_srev;
1052	u16			ah_mac_version;
1053	u16			ah_mac_revision;
1054	u16			ah_phy_revision;
1055	u16			ah_radio_5ghz_revision;
1056	u16			ah_radio_2ghz_revision;
1057
1058#define ah_modes		ah_capabilities.cap_mode
1059#define ah_ee_version		ah_capabilities.cap_eeprom.ee_version
1060
1061	u32			ah_atim_window;
1062	u32			ah_aifs;
1063	u32			ah_cw_min;
1064	u32			ah_cw_max;
1065	u32			ah_limit_tx_retries;
1066
1067	/* Antenna Control */
1068	u32			ah_ant_ctl[AR5K_EEPROM_N_MODES][AR5K_ANT_MAX];
1069	u8			ah_ant_mode;
1070	u8			ah_tx_ant;
1071	u8			ah_def_ant;
1072	bool			ah_software_retry;
1073
1074	int			ah_gpio_npins;
1075
1076	struct ath5k_capabilities ah_capabilities;
1077
1078	struct ath5k_txq_info	ah_txq[AR5K_NUM_TX_QUEUES];
1079	u32			ah_txq_status;
1080	u32			ah_txq_imr_txok;
1081	u32			ah_txq_imr_txerr;
1082	u32			ah_txq_imr_txurn;
1083	u32			ah_txq_imr_txdesc;
1084	u32			ah_txq_imr_txeol;
1085	u32			ah_txq_imr_cbrorn;
1086	u32			ah_txq_imr_cbrurn;
1087	u32			ah_txq_imr_qtrig;
1088	u32			ah_txq_imr_nofrm;
1089	u32			ah_txq_isr;
1090	u32			*ah_rf_banks;
1091	size_t			ah_rf_banks_size;
1092	size_t			ah_rf_regs_count;
1093	struct ath5k_gain	ah_gain;
1094	u8			ah_offset[AR5K_MAX_RF_BANKS];
1095
1096
1097	struct {
1098		/* Temporary tables used for interpolation */
1099		u8		tmpL[AR5K_EEPROM_N_PD_GAINS]
1100					[AR5K_EEPROM_POWER_TABLE_SIZE];
1101		u8		tmpR[AR5K_EEPROM_N_PD_GAINS]
1102					[AR5K_EEPROM_POWER_TABLE_SIZE];
1103		u8		txp_pd_table[AR5K_EEPROM_POWER_TABLE_SIZE * 2];
1104		u16		txp_rates_power_table[AR5K_MAX_RATES];
1105		u8		txp_min_idx;
1106		bool		txp_tpc;
1107		/* Values in 0.25dB units */
1108		s16		txp_min_pwr;
1109		s16		txp_max_pwr;
1110		/* Values in 0.5dB units */
1111		s16		txp_offset;
1112		s16		txp_ofdm;
1113		s16		txp_cck_ofdm_gainf_delta;
1114		/* Value in dB units */
1115		s16		txp_cck_ofdm_pwr_delta;
1116	} ah_txpower;
1117
1118	struct {
1119		bool		r_enabled;
1120		int		r_last_alert;
1121		struct ieee80211_channel r_last_channel;
1122	} ah_radar;
1123
1124	struct ath5k_nfcal_hist ah_nfcal_hist;
1125
1126	/* noise floor from last periodic calibration */
1127	s32			ah_noise_floor;
1128
1129	/* Calibration timestamp */
1130	unsigned long		ah_cal_tstamp;
1131
1132	/* Calibration interval (secs) */
1133	u8			ah_cal_intval;
1134
1135	/* Software interrupt mask */
1136	u8			ah_swi_mask;
1137
1138	/*
1139	 * Function pointers
1140	 */
1141	int (*ah_setup_rx_desc)(struct ath5k_hw *ah, struct ath5k_desc *desc,
1142				u32 size, unsigned int flags);
1143	int (*ah_setup_tx_desc)(struct ath5k_hw *, struct ath5k_desc *,
1144		unsigned int, unsigned int, enum ath5k_pkt_type, unsigned int,
1145		unsigned int, unsigned int, unsigned int, unsigned int,
1146		unsigned int, unsigned int, unsigned int);
1147	int (*ah_setup_mrr_tx_desc)(struct ath5k_hw *, struct ath5k_desc *,
1148		unsigned int, unsigned int, unsigned int, unsigned int,
1149		unsigned int, unsigned int);
1150	int (*ah_proc_tx_desc)(struct ath5k_hw *, struct ath5k_desc *,
1151		struct ath5k_tx_status *);
1152	int (*ah_proc_rx_desc)(struct ath5k_hw *, struct ath5k_desc *,
1153		struct ath5k_rx_status *);
1154};
1155
1156/*
1157 * Prototypes
1158 */
1159
1160/* Attach/Detach Functions */
1161extern int ath5k_hw_attach(struct ath5k_softc *sc);
1162extern void ath5k_hw_detach(struct ath5k_hw *ah);
1163
1164/* LED functions */
1165extern int ath5k_init_leds(struct ath5k_softc *sc);
1166extern void ath5k_led_enable(struct ath5k_softc *sc);
1167extern void ath5k_led_off(struct ath5k_softc *sc);
1168extern void ath5k_unregister_leds(struct ath5k_softc *sc);
1169
1170/* Reset Functions */
1171extern int ath5k_hw_nic_wakeup(struct ath5k_hw *ah, int flags, bool initial);
1172extern int ath5k_hw_on_hold(struct ath5k_hw *ah);
1173extern int ath5k_hw_reset(struct ath5k_hw *ah, enum nl80211_iftype op_mode, struct ieee80211_channel *channel, bool change_channel);
1174/* Power management functions */
1175extern int ath5k_hw_set_power(struct ath5k_hw *ah, enum ath5k_power_mode mode, bool set_chip, u16 sleep_duration);
1176
1177/* DMA Related Functions */
1178extern void ath5k_hw_start_rx_dma(struct ath5k_hw *ah);
1179extern int ath5k_hw_stop_rx_dma(struct ath5k_hw *ah);
1180extern u32 ath5k_hw_get_rxdp(struct ath5k_hw *ah);
1181extern void ath5k_hw_set_rxdp(struct ath5k_hw *ah, u32 phys_addr);
1182extern int ath5k_hw_start_tx_dma(struct ath5k_hw *ah, unsigned int queue);
1183extern int ath5k_hw_stop_tx_dma(struct ath5k_hw *ah, unsigned int queue);
1184extern u32 ath5k_hw_get_txdp(struct ath5k_hw *ah, unsigned int queue);
1185extern int ath5k_hw_set_txdp(struct ath5k_hw *ah, unsigned int queue,
1186				u32 phys_addr);
1187extern int ath5k_hw_update_tx_triglevel(struct ath5k_hw *ah, bool increase);
1188/* Interrupt handling */
1189extern bool ath5k_hw_is_intr_pending(struct ath5k_hw *ah);
1190extern int ath5k_hw_get_isr(struct ath5k_hw *ah, enum ath5k_int *interrupt_mask);
1191extern enum ath5k_int ath5k_hw_set_imr(struct ath5k_hw *ah, enum
1192ath5k_int new_mask);
1193extern void ath5k_hw_update_mib_counters(struct ath5k_hw *ah, struct ieee80211_low_level_stats *stats);
1194
1195/* EEPROM access functions */
1196extern int ath5k_eeprom_init(struct ath5k_hw *ah);
1197extern void ath5k_eeprom_detach(struct ath5k_hw *ah);
1198extern int ath5k_eeprom_read_mac(struct ath5k_hw *ah, u8 *mac);
1199extern bool ath5k_eeprom_is_hb63(struct ath5k_hw *ah);
1200
1201/* Protocol Control Unit Functions */
1202extern int ath5k_hw_set_opmode(struct ath5k_hw *ah);
1203/* BSSID Functions */
1204extern int ath5k_hw_set_lladdr(struct ath5k_hw *ah, const u8 *mac);
1205extern void ath5k_hw_set_associd(struct ath5k_hw *ah);
1206extern void ath5k_hw_set_bssid_mask(struct ath5k_hw *ah, const u8 *mask);
1207/* Receive start/stop functions */
1208extern void ath5k_hw_start_rx_pcu(struct ath5k_hw *ah);
1209extern void ath5k_hw_stop_rx_pcu(struct ath5k_hw *ah);
1210/* RX Filter functions */
1211extern void ath5k_hw_set_mcast_filter(struct ath5k_hw *ah, u32 filter0, u32 filter1);
1212extern int ath5k_hw_set_mcast_filter_idx(struct ath5k_hw *ah, u32 index);
1213extern int ath5k_hw_clear_mcast_filter_idx(struct ath5k_hw *ah, u32 index);
1214extern u32 ath5k_hw_get_rx_filter(struct ath5k_hw *ah);
1215extern void ath5k_hw_set_rx_filter(struct ath5k_hw *ah, u32 filter);
1216/* Beacon control functions */
1217extern u32 ath5k_hw_get_tsf32(struct ath5k_hw *ah);
1218extern u64 ath5k_hw_get_tsf64(struct ath5k_hw *ah);
1219extern void ath5k_hw_set_tsf64(struct ath5k_hw *ah, u64 tsf64);
1220extern void ath5k_hw_reset_tsf(struct ath5k_hw *ah);
1221extern void ath5k_hw_init_beacon(struct ath5k_hw *ah, u32 next_beacon, u32 interval);
1222#if 0
1223extern int ath5k_hw_set_beacon_timers(struct ath5k_hw *ah, const struct ath5k_beacon_state *state);
1224extern void ath5k_hw_reset_beacon(struct ath5k_hw *ah);
1225extern int ath5k_hw_beaconq_finish(struct ath5k_hw *ah, unsigned long phys_addr);
1226#endif
1227/* ACK bit rate */
1228void ath5k_hw_set_ack_bitrate_high(struct ath5k_hw *ah, bool high);
1229/* ACK/CTS Timeouts */
1230extern int ath5k_hw_set_ack_timeout(struct ath5k_hw *ah, unsigned int timeout);
1231extern unsigned int ath5k_hw_get_ack_timeout(struct ath5k_hw *ah);
1232extern int ath5k_hw_set_cts_timeout(struct ath5k_hw *ah, unsigned int timeout);
1233extern unsigned int ath5k_hw_get_cts_timeout(struct ath5k_hw *ah);
1234/* Key table (WEP) functions */
1235extern int ath5k_hw_reset_key(struct ath5k_hw *ah, u16 entry);
1236extern int ath5k_hw_is_key_valid(struct ath5k_hw *ah, u16 entry);
1237extern int ath5k_hw_set_key(struct ath5k_hw *ah, u16 entry, const struct ieee80211_key_conf *key, const u8 *mac);
1238extern int ath5k_hw_set_key_lladdr(struct ath5k_hw *ah, u16 entry, const u8 *mac);
1239
1240/* Queue Control Unit, DFS Control Unit Functions */
1241extern int ath5k_hw_get_tx_queueprops(struct ath5k_hw *ah, int queue, struct ath5k_txq_info *queue_info);
1242extern int ath5k_hw_set_tx_queueprops(struct ath5k_hw *ah, int queue,
1243				const struct ath5k_txq_info *queue_info);
1244extern int ath5k_hw_setup_tx_queue(struct ath5k_hw *ah,
1245				enum ath5k_tx_queue queue_type,
1246				struct ath5k_txq_info *queue_info);
1247extern u32 ath5k_hw_num_tx_pending(struct ath5k_hw *ah, unsigned int queue);
1248extern void ath5k_hw_release_tx_queue(struct ath5k_hw *ah, unsigned int queue);
1249extern int ath5k_hw_reset_tx_queue(struct ath5k_hw *ah, unsigned int queue);
1250extern unsigned int ath5k_hw_get_slot_time(struct ath5k_hw *ah);
1251extern int ath5k_hw_set_slot_time(struct ath5k_hw *ah, unsigned int slot_time);
1252
1253/* Hardware Descriptor Functions */
1254extern int ath5k_hw_init_desc_functions(struct ath5k_hw *ah);
1255
1256/* GPIO Functions */
1257extern void ath5k_hw_set_ledstate(struct ath5k_hw *ah, unsigned int state);
1258extern int ath5k_hw_set_gpio_input(struct ath5k_hw *ah, u32 gpio);
1259extern int ath5k_hw_set_gpio_output(struct ath5k_hw *ah, u32 gpio);
1260extern u32 ath5k_hw_get_gpio(struct ath5k_hw *ah, u32 gpio);
1261extern int ath5k_hw_set_gpio(struct ath5k_hw *ah, u32 gpio, u32 val);
1262extern void ath5k_hw_set_gpio_intr(struct ath5k_hw *ah, unsigned int gpio, u32 interrupt_level);
1263
1264/* rfkill Functions */
1265extern void ath5k_rfkill_hw_start(struct ath5k_hw *ah);
1266extern void ath5k_rfkill_hw_stop(struct ath5k_hw *ah);
1267
1268/* Misc functions */
1269int ath5k_hw_set_capabilities(struct ath5k_hw *ah);
1270extern int ath5k_hw_get_capability(struct ath5k_hw *ah, enum ath5k_capability_type cap_type, u32 capability, u32 *result);
1271extern int ath5k_hw_enable_pspoll(struct ath5k_hw *ah, u8 *bssid, u16 assoc_id);
1272extern int ath5k_hw_disable_pspoll(struct ath5k_hw *ah);
1273
1274/* Initial register settings functions */
1275extern int ath5k_hw_write_initvals(struct ath5k_hw *ah, u8 mode, bool change_channel);
1276
1277/* Initialize RF */
1278extern int ath5k_hw_rfregs_init(struct ath5k_hw *ah,
1279				struct ieee80211_channel *channel,
1280				unsigned int mode);
1281extern int ath5k_hw_rfgain_init(struct ath5k_hw *ah, unsigned int freq);
1282extern enum ath5k_rfgain ath5k_hw_gainf_calibrate(struct ath5k_hw *ah);
1283extern int ath5k_hw_rfgain_opt_init(struct ath5k_hw *ah);
1284/* PHY/RF channel functions */
1285extern bool ath5k_channel_ok(struct ath5k_hw *ah, u16 freq, unsigned int flags);
1286extern int ath5k_hw_channel(struct ath5k_hw *ah, struct ieee80211_channel *channel);
1287/* PHY calibration */
1288void ath5k_hw_init_nfcal_hist(struct ath5k_hw *ah);
1289extern int ath5k_hw_phy_calibrate(struct ath5k_hw *ah, struct ieee80211_channel *channel);
1290extern int ath5k_hw_noise_floor_calibration(struct ath5k_hw *ah, short freq);
1291extern s16 ath5k_hw_get_noise_floor(struct ath5k_hw *ah);
1292extern void ath5k_hw_calibration_poll(struct ath5k_hw *ah);
1293/* Spur mitigation */
1294bool ath5k_hw_chan_has_spur_noise(struct ath5k_hw *ah,
1295				struct ieee80211_channel *channel);
1296void ath5k_hw_set_spur_mitigation_filter(struct ath5k_hw *ah,
1297				struct ieee80211_channel *channel);
1298/* Misc PHY functions */
1299extern u16 ath5k_hw_radio_revision(struct ath5k_hw *ah, unsigned int chan);
1300extern int ath5k_hw_phy_disable(struct ath5k_hw *ah);
1301/* Antenna control */
1302extern void ath5k_hw_set_antenna_mode(struct ath5k_hw *ah, u8 ant_mode);
1303extern void ath5k_hw_set_def_antenna(struct ath5k_hw *ah, u8 ant);
1304extern unsigned int ath5k_hw_get_def_antenna(struct ath5k_hw *ah);
1305/* TX power setup */
1306extern int ath5k_hw_txpower(struct ath5k_hw *ah, struct ieee80211_channel *channel, u8 ee_mode, u8 txpower);
1307extern int ath5k_hw_set_txpower_limit(struct ath5k_hw *ah, u8 txpower);
1308
1309/*
1310 * Functions used internaly
1311 */
1312
1313/*
1314 * Translate usec to hw clock units
1315 * TODO: Half/quarter rate
1316 */
1317static inline unsigned int ath5k_hw_htoclock(unsigned int usec, bool turbo)
1318{
1319	return turbo ? (usec * 80) : (usec * 40);
1320}
1321
1322/*
1323 * Translate hw clock units to usec
1324 * TODO: Half/quarter rate
1325 */
1326static inline unsigned int ath5k_hw_clocktoh(unsigned int clock, bool turbo)
1327{
1328	return turbo ? (clock / 80) : (clock / 40);
1329}
1330
1331static inline struct ath_common *ath5k_hw_common(struct ath5k_hw *ah)
1332{
1333        return &ah->common;
1334}
1335
1336static inline struct ath_regulatory *ath5k_hw_regulatory(struct ath5k_hw *ah)
1337{
1338        return &(ath5k_hw_common(ah)->regulatory);
1339}
1340
1341static inline u32 ath5k_hw_reg_read(struct ath5k_hw *ah, u16 reg)
1342{
1343	return ioread32(ah->ah_iobase + reg);
1344}
1345
1346static inline void ath5k_hw_reg_write(struct ath5k_hw *ah, u32 val, u16 reg)
1347{
1348	iowrite32(val, ah->ah_iobase + reg);
1349}
1350
1351#if defined(_ATH5K_RESET) || defined(_ATH5K_PHY)
1352/*
1353 * Check if a register write has been completed
1354 */
1355static int ath5k_hw_register_timeout(struct ath5k_hw *ah, u32 reg, u32 flag,
1356		u32 val, bool is_set)
1357{
1358	int i;
1359	u32 data;
1360
1361	for (i = AR5K_TUNE_REGISTER_TIMEOUT; i > 0; i--) {
1362		data = ath5k_hw_reg_read(ah, reg);
1363		if (is_set && (data & flag))
1364			break;
1365		else if ((data & flag) == val)
1366			break;
1367		udelay(15);
1368	}
1369
1370	return (i <= 0) ? -EAGAIN : 0;
1371}
1372#endif
1373
1374static inline u32 ath5k_hw_bitswap(u32 val, unsigned int bits)
1375{
1376	u32 retval = 0, bit, i;
1377
1378	for (i = 0; i < bits; i++) {
1379		bit = (val >> i) & 1;
1380		retval = (retval << 1) | bit;
1381	}
1382
1383	return retval;
1384}
1385
1386static inline int ath5k_pad_size(int hdrlen)
1387{
1388	return (hdrlen < 24) ? 0 : hdrlen & 3;
1389}
1390
1391#endif
1392