zd_mac.h revision 71184ba482f800254f0a825e3c8b1752a1a7a36d
1/* ZD1211 USB-WLAN driver for Linux
2 *
3 * Copyright (C) 2005-2007 Ulrich Kunitz <kune@deine-taler.de>
4 * Copyright (C) 2006-2007 Daniel Drake <dsd@gentoo.org>
5 *
6 * This program is free software; you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License as published by
8 * the Free Software Foundation; either version 2 of the License, or
9 * (at your option) any later version.
10 *
11 * This program is distributed in the hope that it will be useful,
12 * but WITHOUT ANY WARRANTY; without even the implied warranty of
13 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
14 * GNU General Public License for more details.
15 *
16 * You should have received a copy of the GNU General Public License
17 * along with this program; if not, write to the Free Software
18 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
19 */
20
21#ifndef _ZD_MAC_H
22#define _ZD_MAC_H
23
24#include <linux/kernel.h>
25#include <net/mac80211.h>
26
27#include "zd_chip.h"
28
29struct zd_ctrlset {
30	u8     modulation;
31	__le16 tx_length;
32	u8     control;
33	/* stores only the difference to tx_length on ZD1211B */
34	__le16 packet_length;
35	__le16 current_length;
36	u8     service;
37	__le16  next_frame_length;
38} __attribute__((packed));
39
40#define ZD_CS_RESERVED_SIZE	25
41
42/* The field modulation of struct zd_ctrlset controls the bit rate, the use
43 * of short or long preambles in 802.11b (CCK mode) or the use of 802.11a or
44 * 802.11g in OFDM mode.
45 *
46 * The term zd-rate is used for the combination of the modulation type flag
47 * and the "pure" rate value.
48 */
49#define ZD_PURE_RATE_MASK       0x0f
50#define ZD_MODULATION_TYPE_MASK 0x10
51#define ZD_RATE_MASK            (ZD_PURE_RATE_MASK|ZD_MODULATION_TYPE_MASK)
52#define ZD_PURE_RATE(modulation) ((modulation) & ZD_PURE_RATE_MASK)
53#define ZD_MODULATION_TYPE(modulation) ((modulation) & ZD_MODULATION_TYPE_MASK)
54#define ZD_RATE(modulation) ((modulation) & ZD_RATE_MASK)
55
56/* The two possible modulation types. Notify that 802.11b doesn't use the CCK
57 * codeing for the 1 and 2 MBit/s rate. We stay with the term here to remain
58 * consistent with uses the term at other places.
59 */
60#define ZD_CCK                  0x00
61#define ZD_OFDM                 0x10
62
63/* The ZD1211 firmware uses proprietary encodings of the 802.11b (CCK) rates.
64 * For OFDM the PLCP rate encodings are used. We combine these "pure" rates
65 * with the modulation type flag and call the resulting values zd-rates.
66 */
67#define ZD_CCK_RATE_1M          (ZD_CCK|0x00)
68#define ZD_CCK_RATE_2M          (ZD_CCK|0x01)
69#define ZD_CCK_RATE_5_5M        (ZD_CCK|0x02)
70#define ZD_CCK_RATE_11M         (ZD_CCK|0x03)
71#define ZD_OFDM_RATE_6M         (ZD_OFDM|ZD_OFDM_PLCP_RATE_6M)
72#define ZD_OFDM_RATE_9M         (ZD_OFDM|ZD_OFDM_PLCP_RATE_9M)
73#define ZD_OFDM_RATE_12M        (ZD_OFDM|ZD_OFDM_PLCP_RATE_12M)
74#define ZD_OFDM_RATE_18M        (ZD_OFDM|ZD_OFDM_PLCP_RATE_18M)
75#define ZD_OFDM_RATE_24M        (ZD_OFDM|ZD_OFDM_PLCP_RATE_24M)
76#define ZD_OFDM_RATE_36M        (ZD_OFDM|ZD_OFDM_PLCP_RATE_36M)
77#define ZD_OFDM_RATE_48M        (ZD_OFDM|ZD_OFDM_PLCP_RATE_48M)
78#define ZD_OFDM_RATE_54M        (ZD_OFDM|ZD_OFDM_PLCP_RATE_54M)
79
80/* The bit 5 of the zd_ctrlset modulation field controls the preamble in CCK
81 * mode or the 802.11a/802.11g selection in OFDM mode.
82 */
83#define ZD_CCK_PREA_LONG        0x00
84#define ZD_CCK_PREA_SHORT       0x20
85#define ZD_OFDM_MODE_11G        0x00
86#define ZD_OFDM_MODE_11A        0x20
87
88/* zd_ctrlset control field */
89#define ZD_CS_NEED_RANDOM_BACKOFF	0x01
90#define ZD_CS_NO_ACK			0x02
91
92#define ZD_CS_FRAME_TYPE_MASK		0x0c
93#define ZD_CS_DATA_FRAME		0x00
94#define ZD_CS_PS_POLL_FRAME		0x04
95#define ZD_CS_MANAGEMENT_FRAME		0x08
96#define ZD_CS_NO_SEQUENCE_CTL_FRAME	0x0c
97
98#define ZD_CS_WAKE_DESTINATION		0x10
99#define ZD_CS_RTS			0x20
100#define ZD_CS_ENCRYPT			0x40
101#define ZD_CS_SELF_CTS			0x80
102
103/* Incoming frames are prepended by a PLCP header */
104#define ZD_PLCP_HEADER_SIZE		5
105
106struct rx_length_info {
107	__le16 length[3];
108	__le16 tag;
109} __attribute__((packed));
110
111#define RX_LENGTH_INFO_TAG		0x697e
112
113struct rx_status {
114	u8 signal_quality_cck;
115	/* rssi */
116	u8 signal_strength;
117	u8 signal_quality_ofdm;
118	u8 decryption_type;
119	u8 frame_status;
120} __attribute__((packed));
121
122/* rx_status field decryption_type */
123#define ZD_RX_NO_WEP	0
124#define ZD_RX_WEP64	1
125#define ZD_RX_TKIP	2
126#define ZD_RX_AES	4
127#define ZD_RX_WEP128	5
128#define ZD_RX_WEP256	6
129
130/* rx_status field frame_status */
131#define ZD_RX_FRAME_MODULATION_MASK	0x01
132#define ZD_RX_CCK			0x00
133#define ZD_RX_OFDM			0x01
134
135#define ZD_RX_TIMEOUT_ERROR		0x02
136#define ZD_RX_FIFO_OVERRUN_ERROR	0x04
137#define ZD_RX_DECRYPTION_ERROR		0x08
138#define ZD_RX_CRC32_ERROR		0x10
139#define ZD_RX_NO_ADDR1_MATCH_ERROR	0x20
140#define ZD_RX_CRC16_ERROR		0x40
141#define ZD_RX_ERROR			0x80
142
143struct tx_retry_rate {
144	int count;	/* number of valid element in rate[] array */
145	int rate[10];	/* retry rates, described by an index in zd_rates[] */
146};
147
148struct tx_status {
149	u8 type;	/* must always be 0x01 : USB_INT_TYPE */
150	u8 id;		/* must always be 0xa0 : USB_INT_ID_RETRY_FAILED */
151	u8 rate;
152	u8 pad;
153	u8 mac[ETH_ALEN];
154	u8 retry;
155	u8 failure;
156} __attribute__((packed));
157
158enum mac_flags {
159	MAC_FIXED_CHANNEL = 0x01,
160};
161
162struct housekeeping {
163	struct delayed_work link_led_work;
164};
165
166#define ZD_MAC_STATS_BUFFER_SIZE 16
167
168#define ZD_MAC_MAX_ACK_WAITERS 50
169
170struct zd_mac {
171	struct zd_chip chip;
172	spinlock_t lock;
173	spinlock_t intr_lock;
174	struct ieee80211_hw *hw;
175	struct housekeeping housekeeping;
176	struct work_struct set_multicast_hash_work;
177	struct work_struct set_rts_cts_work;
178	struct work_struct set_rx_filter_work;
179	struct work_struct process_intr;
180	struct zd_mc_hash multicast_hash;
181	u8 intr_buffer[USB_MAX_EP_INT_BUFFER];
182	u8 regdomain;
183	u8 default_regdomain;
184	int type;
185	int associated;
186	struct sk_buff_head ack_wait_queue;
187	struct ieee80211_channel channels[14];
188	struct ieee80211_rate rates[12];
189	struct ieee80211_supported_band band;
190
191	/* Short preamble (used for RTS/CTS) */
192	unsigned int short_preamble:1;
193
194	/* flags to indicate update in progress */
195	unsigned int updating_rts_rate:1;
196
197	/* whether to pass frames with CRC errors to stack */
198	unsigned int pass_failed_fcs:1;
199
200	/* whether to pass control frames to stack */
201	unsigned int pass_ctrl:1;
202
203	/* whether we have received a 802.11 ACK that is pending */
204	unsigned int ack_pending:1;
205
206	/* signal strength of the last 802.11 ACK received */
207	int ack_signal;
208};
209
210#define ZD_REGDOMAIN_FCC	0x10
211#define ZD_REGDOMAIN_IC		0x20
212#define ZD_REGDOMAIN_ETSI	0x30
213#define ZD_REGDOMAIN_SPAIN	0x31
214#define ZD_REGDOMAIN_FRANCE	0x32
215#define ZD_REGDOMAIN_JAPAN_ADD	0x40
216#define ZD_REGDOMAIN_JAPAN	0x41
217#define ZD_REGDOMAIN_JAPAN_GW_US54GXS	0x49
218
219enum {
220	MIN_CHANNEL24 = 1,
221	MAX_CHANNEL24 = 14,
222};
223
224#define ZD_PLCP_SERVICE_LENGTH_EXTENSION 0x80
225
226struct ofdm_plcp_header {
227	u8 prefix[3];
228	__le16 service;
229} __attribute__((packed));
230
231static inline u8 zd_ofdm_plcp_header_rate(const struct ofdm_plcp_header *header)
232{
233	return header->prefix[0] & 0xf;
234}
235
236/* The following defines give the encoding of the 4-bit rate field in the
237 * OFDM (802.11a/802.11g) PLCP header. Notify that these values are used to
238 * define the zd-rate values for OFDM.
239 *
240 * See the struct zd_ctrlset definition in zd_mac.h.
241 */
242#define ZD_OFDM_PLCP_RATE_6M	0xb
243#define ZD_OFDM_PLCP_RATE_9M	0xf
244#define ZD_OFDM_PLCP_RATE_12M	0xa
245#define ZD_OFDM_PLCP_RATE_18M	0xe
246#define ZD_OFDM_PLCP_RATE_24M	0x9
247#define ZD_OFDM_PLCP_RATE_36M	0xd
248#define ZD_OFDM_PLCP_RATE_48M	0x8
249#define ZD_OFDM_PLCP_RATE_54M	0xc
250
251struct cck_plcp_header {
252	u8 signal;
253	u8 service;
254	__le16 length;
255	__le16 crc16;
256} __attribute__((packed));
257
258static inline u8 zd_cck_plcp_header_signal(const struct cck_plcp_header *header)
259{
260	return header->signal;
261}
262
263/* These defines give the encodings of the signal field in the 802.11b PLCP
264 * header. The signal field gives the bit rate of the following packet. Even
265 * if technically wrong we use CCK here also for the 1 MBit/s and 2 MBit/s
266 * rate to stay consistent with Zydas and our use of the term.
267 *
268 * Notify that these values are *not* used in the zd-rates.
269 */
270#define ZD_CCK_PLCP_SIGNAL_1M	0x0a
271#define ZD_CCK_PLCP_SIGNAL_2M	0x14
272#define ZD_CCK_PLCP_SIGNAL_5M5	0x37
273#define ZD_CCK_PLCP_SIGNAL_11M	0x6e
274
275static inline struct zd_mac *zd_hw_mac(struct ieee80211_hw *hw)
276{
277	return hw->priv;
278}
279
280static inline struct zd_mac *zd_chip_to_mac(struct zd_chip *chip)
281{
282	return container_of(chip, struct zd_mac, chip);
283}
284
285static inline struct zd_mac *zd_usb_to_mac(struct zd_usb *usb)
286{
287	return zd_chip_to_mac(zd_usb_to_chip(usb));
288}
289
290static inline u8 *zd_mac_get_perm_addr(struct zd_mac *mac)
291{
292	return mac->hw->wiphy->perm_addr;
293}
294
295#define zd_mac_dev(mac) (zd_chip_dev(&(mac)->chip))
296
297struct ieee80211_hw *zd_mac_alloc_hw(struct usb_interface *intf);
298void zd_mac_clear(struct zd_mac *mac);
299
300int zd_mac_preinit_hw(struct ieee80211_hw *hw);
301int zd_mac_init_hw(struct ieee80211_hw *hw);
302
303int zd_mac_rx(struct ieee80211_hw *hw, const u8 *buffer, unsigned int length);
304void zd_mac_tx_failed(struct urb *urb);
305void zd_mac_tx_to_dev(struct sk_buff *skb, int error);
306
307#ifdef DEBUG
308void zd_dump_rx_status(const struct rx_status *status);
309#else
310#define zd_dump_rx_status(status)
311#endif /* DEBUG */
312
313#endif /* _ZD_MAC_H */
314