core.c revision fff15bef48e846d2670c86c95f8dbc3f84bbe866
1/* 2 * core.c -- Voltage/Current Regulator framework. 3 * 4 * Copyright 2007, 2008 Wolfson Microelectronics PLC. 5 * Copyright 2008 SlimLogic Ltd. 6 * 7 * Author: Liam Girdwood <lrg@slimlogic.co.uk> 8 * 9 * This program is free software; you can redistribute it and/or modify it 10 * under the terms of the GNU General Public License as published by the 11 * Free Software Foundation; either version 2 of the License, or (at your 12 * option) any later version. 13 * 14 */ 15 16#include <linux/kernel.h> 17#include <linux/init.h> 18#include <linux/debugfs.h> 19#include <linux/device.h> 20#include <linux/slab.h> 21#include <linux/async.h> 22#include <linux/err.h> 23#include <linux/mutex.h> 24#include <linux/suspend.h> 25#include <linux/delay.h> 26#include <linux/gpio.h> 27#include <linux/of.h> 28#include <linux/regmap.h> 29#include <linux/regulator/of_regulator.h> 30#include <linux/regulator/consumer.h> 31#include <linux/regulator/driver.h> 32#include <linux/regulator/machine.h> 33#include <linux/module.h> 34 35#define CREATE_TRACE_POINTS 36#include <trace/events/regulator.h> 37 38#include "dummy.h" 39 40#define rdev_crit(rdev, fmt, ...) \ 41 pr_crit("%s: " fmt, rdev_get_name(rdev), ##__VA_ARGS__) 42#define rdev_err(rdev, fmt, ...) \ 43 pr_err("%s: " fmt, rdev_get_name(rdev), ##__VA_ARGS__) 44#define rdev_warn(rdev, fmt, ...) \ 45 pr_warn("%s: " fmt, rdev_get_name(rdev), ##__VA_ARGS__) 46#define rdev_info(rdev, fmt, ...) \ 47 pr_info("%s: " fmt, rdev_get_name(rdev), ##__VA_ARGS__) 48#define rdev_dbg(rdev, fmt, ...) \ 49 pr_debug("%s: " fmt, rdev_get_name(rdev), ##__VA_ARGS__) 50 51static DEFINE_MUTEX(regulator_list_mutex); 52static LIST_HEAD(regulator_list); 53static LIST_HEAD(regulator_map_list); 54static bool has_full_constraints; 55static bool board_wants_dummy_regulator; 56 57static struct dentry *debugfs_root; 58 59/* 60 * struct regulator_map 61 * 62 * Used to provide symbolic supply names to devices. 63 */ 64struct regulator_map { 65 struct list_head list; 66 const char *dev_name; /* The dev_name() for the consumer */ 67 const char *supply; 68 struct regulator_dev *regulator; 69}; 70 71/* 72 * struct regulator 73 * 74 * One for each consumer device. 75 */ 76struct regulator { 77 struct device *dev; 78 struct list_head list; 79 unsigned int always_on:1; 80 unsigned int bypass:1; 81 int uA_load; 82 int min_uV; 83 int max_uV; 84 char *supply_name; 85 struct device_attribute dev_attr; 86 struct regulator_dev *rdev; 87 struct dentry *debugfs; 88}; 89 90static int _regulator_is_enabled(struct regulator_dev *rdev); 91static int _regulator_disable(struct regulator_dev *rdev); 92static int _regulator_get_voltage(struct regulator_dev *rdev); 93static int _regulator_get_current_limit(struct regulator_dev *rdev); 94static unsigned int _regulator_get_mode(struct regulator_dev *rdev); 95static void _notifier_call_chain(struct regulator_dev *rdev, 96 unsigned long event, void *data); 97static int _regulator_do_set_voltage(struct regulator_dev *rdev, 98 int min_uV, int max_uV); 99static struct regulator *create_regulator(struct regulator_dev *rdev, 100 struct device *dev, 101 const char *supply_name); 102 103static const char *rdev_get_name(struct regulator_dev *rdev) 104{ 105 if (rdev->constraints && rdev->constraints->name) 106 return rdev->constraints->name; 107 else if (rdev->desc->name) 108 return rdev->desc->name; 109 else 110 return ""; 111} 112 113/** 114 * of_get_regulator - get a regulator device node based on supply name 115 * @dev: Device pointer for the consumer (of regulator) device 116 * @supply: regulator supply name 117 * 118 * Extract the regulator device node corresponding to the supply name. 119 * retruns the device node corresponding to the regulator if found, else 120 * returns NULL. 121 */ 122static struct device_node *of_get_regulator(struct device *dev, const char *supply) 123{ 124 struct device_node *regnode = NULL; 125 char prop_name[32]; /* 32 is max size of property name */ 126 127 dev_dbg(dev, "Looking up %s-supply from device tree\n", supply); 128 129 snprintf(prop_name, 32, "%s-supply", supply); 130 regnode = of_parse_phandle(dev->of_node, prop_name, 0); 131 132 if (!regnode) { 133 dev_dbg(dev, "Looking up %s property in node %s failed", 134 prop_name, dev->of_node->full_name); 135 return NULL; 136 } 137 return regnode; 138} 139 140static int _regulator_can_change_status(struct regulator_dev *rdev) 141{ 142 if (!rdev->constraints) 143 return 0; 144 145 if (rdev->constraints->valid_ops_mask & REGULATOR_CHANGE_STATUS) 146 return 1; 147 else 148 return 0; 149} 150 151/* Platform voltage constraint check */ 152static int regulator_check_voltage(struct regulator_dev *rdev, 153 int *min_uV, int *max_uV) 154{ 155 BUG_ON(*min_uV > *max_uV); 156 157 if (!rdev->constraints) { 158 rdev_err(rdev, "no constraints\n"); 159 return -ENODEV; 160 } 161 if (!(rdev->constraints->valid_ops_mask & REGULATOR_CHANGE_VOLTAGE)) { 162 rdev_err(rdev, "operation not allowed\n"); 163 return -EPERM; 164 } 165 166 if (*max_uV > rdev->constraints->max_uV) 167 *max_uV = rdev->constraints->max_uV; 168 if (*min_uV < rdev->constraints->min_uV) 169 *min_uV = rdev->constraints->min_uV; 170 171 if (*min_uV > *max_uV) { 172 rdev_err(rdev, "unsupportable voltage range: %d-%duV\n", 173 *min_uV, *max_uV); 174 return -EINVAL; 175 } 176 177 return 0; 178} 179 180/* Make sure we select a voltage that suits the needs of all 181 * regulator consumers 182 */ 183static int regulator_check_consumers(struct regulator_dev *rdev, 184 int *min_uV, int *max_uV) 185{ 186 struct regulator *regulator; 187 188 list_for_each_entry(regulator, &rdev->consumer_list, list) { 189 /* 190 * Assume consumers that didn't say anything are OK 191 * with anything in the constraint range. 192 */ 193 if (!regulator->min_uV && !regulator->max_uV) 194 continue; 195 196 if (*max_uV > regulator->max_uV) 197 *max_uV = regulator->max_uV; 198 if (*min_uV < regulator->min_uV) 199 *min_uV = regulator->min_uV; 200 } 201 202 if (*min_uV > *max_uV) { 203 dev_err(regulator->dev, "Restricting voltage, %u-%uuV\n", 204 regulator->min_uV, regulator->max_uV); 205 return -EINVAL; 206 } 207 208 return 0; 209} 210 211/* current constraint check */ 212static int regulator_check_current_limit(struct regulator_dev *rdev, 213 int *min_uA, int *max_uA) 214{ 215 BUG_ON(*min_uA > *max_uA); 216 217 if (!rdev->constraints) { 218 rdev_err(rdev, "no constraints\n"); 219 return -ENODEV; 220 } 221 if (!(rdev->constraints->valid_ops_mask & REGULATOR_CHANGE_CURRENT)) { 222 rdev_err(rdev, "operation not allowed\n"); 223 return -EPERM; 224 } 225 226 if (*max_uA > rdev->constraints->max_uA) 227 *max_uA = rdev->constraints->max_uA; 228 if (*min_uA < rdev->constraints->min_uA) 229 *min_uA = rdev->constraints->min_uA; 230 231 if (*min_uA > *max_uA) { 232 rdev_err(rdev, "unsupportable current range: %d-%duA\n", 233 *min_uA, *max_uA); 234 return -EINVAL; 235 } 236 237 return 0; 238} 239 240/* operating mode constraint check */ 241static int regulator_mode_constrain(struct regulator_dev *rdev, int *mode) 242{ 243 switch (*mode) { 244 case REGULATOR_MODE_FAST: 245 case REGULATOR_MODE_NORMAL: 246 case REGULATOR_MODE_IDLE: 247 case REGULATOR_MODE_STANDBY: 248 break; 249 default: 250 rdev_err(rdev, "invalid mode %x specified\n", *mode); 251 return -EINVAL; 252 } 253 254 if (!rdev->constraints) { 255 rdev_err(rdev, "no constraints\n"); 256 return -ENODEV; 257 } 258 if (!(rdev->constraints->valid_ops_mask & REGULATOR_CHANGE_MODE)) { 259 rdev_err(rdev, "operation not allowed\n"); 260 return -EPERM; 261 } 262 263 /* The modes are bitmasks, the most power hungry modes having 264 * the lowest values. If the requested mode isn't supported 265 * try higher modes. */ 266 while (*mode) { 267 if (rdev->constraints->valid_modes_mask & *mode) 268 return 0; 269 *mode /= 2; 270 } 271 272 return -EINVAL; 273} 274 275/* dynamic regulator mode switching constraint check */ 276static int regulator_check_drms(struct regulator_dev *rdev) 277{ 278 if (!rdev->constraints) { 279 rdev_err(rdev, "no constraints\n"); 280 return -ENODEV; 281 } 282 if (!(rdev->constraints->valid_ops_mask & REGULATOR_CHANGE_DRMS)) { 283 rdev_err(rdev, "operation not allowed\n"); 284 return -EPERM; 285 } 286 return 0; 287} 288 289static ssize_t regulator_uV_show(struct device *dev, 290 struct device_attribute *attr, char *buf) 291{ 292 struct regulator_dev *rdev = dev_get_drvdata(dev); 293 ssize_t ret; 294 295 mutex_lock(&rdev->mutex); 296 ret = sprintf(buf, "%d\n", _regulator_get_voltage(rdev)); 297 mutex_unlock(&rdev->mutex); 298 299 return ret; 300} 301static DEVICE_ATTR(microvolts, 0444, regulator_uV_show, NULL); 302 303static ssize_t regulator_uA_show(struct device *dev, 304 struct device_attribute *attr, char *buf) 305{ 306 struct regulator_dev *rdev = dev_get_drvdata(dev); 307 308 return sprintf(buf, "%d\n", _regulator_get_current_limit(rdev)); 309} 310static DEVICE_ATTR(microamps, 0444, regulator_uA_show, NULL); 311 312static ssize_t regulator_name_show(struct device *dev, 313 struct device_attribute *attr, char *buf) 314{ 315 struct regulator_dev *rdev = dev_get_drvdata(dev); 316 317 return sprintf(buf, "%s\n", rdev_get_name(rdev)); 318} 319 320static ssize_t regulator_print_opmode(char *buf, int mode) 321{ 322 switch (mode) { 323 case REGULATOR_MODE_FAST: 324 return sprintf(buf, "fast\n"); 325 case REGULATOR_MODE_NORMAL: 326 return sprintf(buf, "normal\n"); 327 case REGULATOR_MODE_IDLE: 328 return sprintf(buf, "idle\n"); 329 case REGULATOR_MODE_STANDBY: 330 return sprintf(buf, "standby\n"); 331 } 332 return sprintf(buf, "unknown\n"); 333} 334 335static ssize_t regulator_opmode_show(struct device *dev, 336 struct device_attribute *attr, char *buf) 337{ 338 struct regulator_dev *rdev = dev_get_drvdata(dev); 339 340 return regulator_print_opmode(buf, _regulator_get_mode(rdev)); 341} 342static DEVICE_ATTR(opmode, 0444, regulator_opmode_show, NULL); 343 344static ssize_t regulator_print_state(char *buf, int state) 345{ 346 if (state > 0) 347 return sprintf(buf, "enabled\n"); 348 else if (state == 0) 349 return sprintf(buf, "disabled\n"); 350 else 351 return sprintf(buf, "unknown\n"); 352} 353 354static ssize_t regulator_state_show(struct device *dev, 355 struct device_attribute *attr, char *buf) 356{ 357 struct regulator_dev *rdev = dev_get_drvdata(dev); 358 ssize_t ret; 359 360 mutex_lock(&rdev->mutex); 361 ret = regulator_print_state(buf, _regulator_is_enabled(rdev)); 362 mutex_unlock(&rdev->mutex); 363 364 return ret; 365} 366static DEVICE_ATTR(state, 0444, regulator_state_show, NULL); 367 368static ssize_t regulator_status_show(struct device *dev, 369 struct device_attribute *attr, char *buf) 370{ 371 struct regulator_dev *rdev = dev_get_drvdata(dev); 372 int status; 373 char *label; 374 375 status = rdev->desc->ops->get_status(rdev); 376 if (status < 0) 377 return status; 378 379 switch (status) { 380 case REGULATOR_STATUS_OFF: 381 label = "off"; 382 break; 383 case REGULATOR_STATUS_ON: 384 label = "on"; 385 break; 386 case REGULATOR_STATUS_ERROR: 387 label = "error"; 388 break; 389 case REGULATOR_STATUS_FAST: 390 label = "fast"; 391 break; 392 case REGULATOR_STATUS_NORMAL: 393 label = "normal"; 394 break; 395 case REGULATOR_STATUS_IDLE: 396 label = "idle"; 397 break; 398 case REGULATOR_STATUS_STANDBY: 399 label = "standby"; 400 break; 401 case REGULATOR_STATUS_BYPASS: 402 label = "bypass"; 403 break; 404 case REGULATOR_STATUS_UNDEFINED: 405 label = "undefined"; 406 break; 407 default: 408 return -ERANGE; 409 } 410 411 return sprintf(buf, "%s\n", label); 412} 413static DEVICE_ATTR(status, 0444, regulator_status_show, NULL); 414 415static ssize_t regulator_min_uA_show(struct device *dev, 416 struct device_attribute *attr, char *buf) 417{ 418 struct regulator_dev *rdev = dev_get_drvdata(dev); 419 420 if (!rdev->constraints) 421 return sprintf(buf, "constraint not defined\n"); 422 423 return sprintf(buf, "%d\n", rdev->constraints->min_uA); 424} 425static DEVICE_ATTR(min_microamps, 0444, regulator_min_uA_show, NULL); 426 427static ssize_t regulator_max_uA_show(struct device *dev, 428 struct device_attribute *attr, char *buf) 429{ 430 struct regulator_dev *rdev = dev_get_drvdata(dev); 431 432 if (!rdev->constraints) 433 return sprintf(buf, "constraint not defined\n"); 434 435 return sprintf(buf, "%d\n", rdev->constraints->max_uA); 436} 437static DEVICE_ATTR(max_microamps, 0444, regulator_max_uA_show, NULL); 438 439static ssize_t regulator_min_uV_show(struct device *dev, 440 struct device_attribute *attr, char *buf) 441{ 442 struct regulator_dev *rdev = dev_get_drvdata(dev); 443 444 if (!rdev->constraints) 445 return sprintf(buf, "constraint not defined\n"); 446 447 return sprintf(buf, "%d\n", rdev->constraints->min_uV); 448} 449static DEVICE_ATTR(min_microvolts, 0444, regulator_min_uV_show, NULL); 450 451static ssize_t regulator_max_uV_show(struct device *dev, 452 struct device_attribute *attr, char *buf) 453{ 454 struct regulator_dev *rdev = dev_get_drvdata(dev); 455 456 if (!rdev->constraints) 457 return sprintf(buf, "constraint not defined\n"); 458 459 return sprintf(buf, "%d\n", rdev->constraints->max_uV); 460} 461static DEVICE_ATTR(max_microvolts, 0444, regulator_max_uV_show, NULL); 462 463static ssize_t regulator_total_uA_show(struct device *dev, 464 struct device_attribute *attr, char *buf) 465{ 466 struct regulator_dev *rdev = dev_get_drvdata(dev); 467 struct regulator *regulator; 468 int uA = 0; 469 470 mutex_lock(&rdev->mutex); 471 list_for_each_entry(regulator, &rdev->consumer_list, list) 472 uA += regulator->uA_load; 473 mutex_unlock(&rdev->mutex); 474 return sprintf(buf, "%d\n", uA); 475} 476static DEVICE_ATTR(requested_microamps, 0444, regulator_total_uA_show, NULL); 477 478static ssize_t regulator_num_users_show(struct device *dev, 479 struct device_attribute *attr, char *buf) 480{ 481 struct regulator_dev *rdev = dev_get_drvdata(dev); 482 return sprintf(buf, "%d\n", rdev->use_count); 483} 484 485static ssize_t regulator_type_show(struct device *dev, 486 struct device_attribute *attr, char *buf) 487{ 488 struct regulator_dev *rdev = dev_get_drvdata(dev); 489 490 switch (rdev->desc->type) { 491 case REGULATOR_VOLTAGE: 492 return sprintf(buf, "voltage\n"); 493 case REGULATOR_CURRENT: 494 return sprintf(buf, "current\n"); 495 } 496 return sprintf(buf, "unknown\n"); 497} 498 499static ssize_t regulator_suspend_mem_uV_show(struct device *dev, 500 struct device_attribute *attr, char *buf) 501{ 502 struct regulator_dev *rdev = dev_get_drvdata(dev); 503 504 return sprintf(buf, "%d\n", rdev->constraints->state_mem.uV); 505} 506static DEVICE_ATTR(suspend_mem_microvolts, 0444, 507 regulator_suspend_mem_uV_show, NULL); 508 509static ssize_t regulator_suspend_disk_uV_show(struct device *dev, 510 struct device_attribute *attr, char *buf) 511{ 512 struct regulator_dev *rdev = dev_get_drvdata(dev); 513 514 return sprintf(buf, "%d\n", rdev->constraints->state_disk.uV); 515} 516static DEVICE_ATTR(suspend_disk_microvolts, 0444, 517 regulator_suspend_disk_uV_show, NULL); 518 519static ssize_t regulator_suspend_standby_uV_show(struct device *dev, 520 struct device_attribute *attr, char *buf) 521{ 522 struct regulator_dev *rdev = dev_get_drvdata(dev); 523 524 return sprintf(buf, "%d\n", rdev->constraints->state_standby.uV); 525} 526static DEVICE_ATTR(suspend_standby_microvolts, 0444, 527 regulator_suspend_standby_uV_show, NULL); 528 529static ssize_t regulator_suspend_mem_mode_show(struct device *dev, 530 struct device_attribute *attr, char *buf) 531{ 532 struct regulator_dev *rdev = dev_get_drvdata(dev); 533 534 return regulator_print_opmode(buf, 535 rdev->constraints->state_mem.mode); 536} 537static DEVICE_ATTR(suspend_mem_mode, 0444, 538 regulator_suspend_mem_mode_show, NULL); 539 540static ssize_t regulator_suspend_disk_mode_show(struct device *dev, 541 struct device_attribute *attr, char *buf) 542{ 543 struct regulator_dev *rdev = dev_get_drvdata(dev); 544 545 return regulator_print_opmode(buf, 546 rdev->constraints->state_disk.mode); 547} 548static DEVICE_ATTR(suspend_disk_mode, 0444, 549 regulator_suspend_disk_mode_show, NULL); 550 551static ssize_t regulator_suspend_standby_mode_show(struct device *dev, 552 struct device_attribute *attr, char *buf) 553{ 554 struct regulator_dev *rdev = dev_get_drvdata(dev); 555 556 return regulator_print_opmode(buf, 557 rdev->constraints->state_standby.mode); 558} 559static DEVICE_ATTR(suspend_standby_mode, 0444, 560 regulator_suspend_standby_mode_show, NULL); 561 562static ssize_t regulator_suspend_mem_state_show(struct device *dev, 563 struct device_attribute *attr, char *buf) 564{ 565 struct regulator_dev *rdev = dev_get_drvdata(dev); 566 567 return regulator_print_state(buf, 568 rdev->constraints->state_mem.enabled); 569} 570static DEVICE_ATTR(suspend_mem_state, 0444, 571 regulator_suspend_mem_state_show, NULL); 572 573static ssize_t regulator_suspend_disk_state_show(struct device *dev, 574 struct device_attribute *attr, char *buf) 575{ 576 struct regulator_dev *rdev = dev_get_drvdata(dev); 577 578 return regulator_print_state(buf, 579 rdev->constraints->state_disk.enabled); 580} 581static DEVICE_ATTR(suspend_disk_state, 0444, 582 regulator_suspend_disk_state_show, NULL); 583 584static ssize_t regulator_suspend_standby_state_show(struct device *dev, 585 struct device_attribute *attr, char *buf) 586{ 587 struct regulator_dev *rdev = dev_get_drvdata(dev); 588 589 return regulator_print_state(buf, 590 rdev->constraints->state_standby.enabled); 591} 592static DEVICE_ATTR(suspend_standby_state, 0444, 593 regulator_suspend_standby_state_show, NULL); 594 595static ssize_t regulator_bypass_show(struct device *dev, 596 struct device_attribute *attr, char *buf) 597{ 598 struct regulator_dev *rdev = dev_get_drvdata(dev); 599 const char *report; 600 bool bypass; 601 int ret; 602 603 ret = rdev->desc->ops->get_bypass(rdev, &bypass); 604 605 if (ret != 0) 606 report = "unknown"; 607 else if (bypass) 608 report = "enabled"; 609 else 610 report = "disabled"; 611 612 return sprintf(buf, "%s\n", report); 613} 614static DEVICE_ATTR(bypass, 0444, 615 regulator_bypass_show, NULL); 616 617/* 618 * These are the only attributes are present for all regulators. 619 * Other attributes are a function of regulator functionality. 620 */ 621static struct device_attribute regulator_dev_attrs[] = { 622 __ATTR(name, 0444, regulator_name_show, NULL), 623 __ATTR(num_users, 0444, regulator_num_users_show, NULL), 624 __ATTR(type, 0444, regulator_type_show, NULL), 625 __ATTR_NULL, 626}; 627 628static void regulator_dev_release(struct device *dev) 629{ 630 struct regulator_dev *rdev = dev_get_drvdata(dev); 631 kfree(rdev); 632} 633 634static struct class regulator_class = { 635 .name = "regulator", 636 .dev_release = regulator_dev_release, 637 .dev_attrs = regulator_dev_attrs, 638}; 639 640/* Calculate the new optimum regulator operating mode based on the new total 641 * consumer load. All locks held by caller */ 642static void drms_uA_update(struct regulator_dev *rdev) 643{ 644 struct regulator *sibling; 645 int current_uA = 0, output_uV, input_uV, err; 646 unsigned int mode; 647 648 err = regulator_check_drms(rdev); 649 if (err < 0 || !rdev->desc->ops->get_optimum_mode || 650 (!rdev->desc->ops->get_voltage && 651 !rdev->desc->ops->get_voltage_sel) || 652 !rdev->desc->ops->set_mode) 653 return; 654 655 /* get output voltage */ 656 output_uV = _regulator_get_voltage(rdev); 657 if (output_uV <= 0) 658 return; 659 660 /* get input voltage */ 661 input_uV = 0; 662 if (rdev->supply) 663 input_uV = regulator_get_voltage(rdev->supply); 664 if (input_uV <= 0) 665 input_uV = rdev->constraints->input_uV; 666 if (input_uV <= 0) 667 return; 668 669 /* calc total requested load */ 670 list_for_each_entry(sibling, &rdev->consumer_list, list) 671 current_uA += sibling->uA_load; 672 673 /* now get the optimum mode for our new total regulator load */ 674 mode = rdev->desc->ops->get_optimum_mode(rdev, input_uV, 675 output_uV, current_uA); 676 677 /* check the new mode is allowed */ 678 err = regulator_mode_constrain(rdev, &mode); 679 if (err == 0) 680 rdev->desc->ops->set_mode(rdev, mode); 681} 682 683static int suspend_set_state(struct regulator_dev *rdev, 684 struct regulator_state *rstate) 685{ 686 int ret = 0; 687 688 /* If we have no suspend mode configration don't set anything; 689 * only warn if the driver implements set_suspend_voltage or 690 * set_suspend_mode callback. 691 */ 692 if (!rstate->enabled && !rstate->disabled) { 693 if (rdev->desc->ops->set_suspend_voltage || 694 rdev->desc->ops->set_suspend_mode) 695 rdev_warn(rdev, "No configuration\n"); 696 return 0; 697 } 698 699 if (rstate->enabled && rstate->disabled) { 700 rdev_err(rdev, "invalid configuration\n"); 701 return -EINVAL; 702 } 703 704 if (rstate->enabled && rdev->desc->ops->set_suspend_enable) 705 ret = rdev->desc->ops->set_suspend_enable(rdev); 706 else if (rstate->disabled && rdev->desc->ops->set_suspend_disable) 707 ret = rdev->desc->ops->set_suspend_disable(rdev); 708 else /* OK if set_suspend_enable or set_suspend_disable is NULL */ 709 ret = 0; 710 711 if (ret < 0) { 712 rdev_err(rdev, "failed to enabled/disable\n"); 713 return ret; 714 } 715 716 if (rdev->desc->ops->set_suspend_voltage && rstate->uV > 0) { 717 ret = rdev->desc->ops->set_suspend_voltage(rdev, rstate->uV); 718 if (ret < 0) { 719 rdev_err(rdev, "failed to set voltage\n"); 720 return ret; 721 } 722 } 723 724 if (rdev->desc->ops->set_suspend_mode && rstate->mode > 0) { 725 ret = rdev->desc->ops->set_suspend_mode(rdev, rstate->mode); 726 if (ret < 0) { 727 rdev_err(rdev, "failed to set mode\n"); 728 return ret; 729 } 730 } 731 return ret; 732} 733 734/* locks held by caller */ 735static int suspend_prepare(struct regulator_dev *rdev, suspend_state_t state) 736{ 737 if (!rdev->constraints) 738 return -EINVAL; 739 740 switch (state) { 741 case PM_SUSPEND_STANDBY: 742 return suspend_set_state(rdev, 743 &rdev->constraints->state_standby); 744 case PM_SUSPEND_MEM: 745 return suspend_set_state(rdev, 746 &rdev->constraints->state_mem); 747 case PM_SUSPEND_MAX: 748 return suspend_set_state(rdev, 749 &rdev->constraints->state_disk); 750 default: 751 return -EINVAL; 752 } 753} 754 755static void print_constraints(struct regulator_dev *rdev) 756{ 757 struct regulation_constraints *constraints = rdev->constraints; 758 char buf[80] = ""; 759 int count = 0; 760 int ret; 761 762 if (constraints->min_uV && constraints->max_uV) { 763 if (constraints->min_uV == constraints->max_uV) 764 count += sprintf(buf + count, "%d mV ", 765 constraints->min_uV / 1000); 766 else 767 count += sprintf(buf + count, "%d <--> %d mV ", 768 constraints->min_uV / 1000, 769 constraints->max_uV / 1000); 770 } 771 772 if (!constraints->min_uV || 773 constraints->min_uV != constraints->max_uV) { 774 ret = _regulator_get_voltage(rdev); 775 if (ret > 0) 776 count += sprintf(buf + count, "at %d mV ", ret / 1000); 777 } 778 779 if (constraints->uV_offset) 780 count += sprintf(buf, "%dmV offset ", 781 constraints->uV_offset / 1000); 782 783 if (constraints->min_uA && constraints->max_uA) { 784 if (constraints->min_uA == constraints->max_uA) 785 count += sprintf(buf + count, "%d mA ", 786 constraints->min_uA / 1000); 787 else 788 count += sprintf(buf + count, "%d <--> %d mA ", 789 constraints->min_uA / 1000, 790 constraints->max_uA / 1000); 791 } 792 793 if (!constraints->min_uA || 794 constraints->min_uA != constraints->max_uA) { 795 ret = _regulator_get_current_limit(rdev); 796 if (ret > 0) 797 count += sprintf(buf + count, "at %d mA ", ret / 1000); 798 } 799 800 if (constraints->valid_modes_mask & REGULATOR_MODE_FAST) 801 count += sprintf(buf + count, "fast "); 802 if (constraints->valid_modes_mask & REGULATOR_MODE_NORMAL) 803 count += sprintf(buf + count, "normal "); 804 if (constraints->valid_modes_mask & REGULATOR_MODE_IDLE) 805 count += sprintf(buf + count, "idle "); 806 if (constraints->valid_modes_mask & REGULATOR_MODE_STANDBY) 807 count += sprintf(buf + count, "standby"); 808 809 if (!count) 810 sprintf(buf, "no parameters"); 811 812 rdev_info(rdev, "%s\n", buf); 813 814 if ((constraints->min_uV != constraints->max_uV) && 815 !(constraints->valid_ops_mask & REGULATOR_CHANGE_VOLTAGE)) 816 rdev_warn(rdev, 817 "Voltage range but no REGULATOR_CHANGE_VOLTAGE\n"); 818} 819 820static int machine_constraints_voltage(struct regulator_dev *rdev, 821 struct regulation_constraints *constraints) 822{ 823 struct regulator_ops *ops = rdev->desc->ops; 824 int ret; 825 826 /* do we need to apply the constraint voltage */ 827 if (rdev->constraints->apply_uV && 828 rdev->constraints->min_uV == rdev->constraints->max_uV) { 829 ret = _regulator_do_set_voltage(rdev, 830 rdev->constraints->min_uV, 831 rdev->constraints->max_uV); 832 if (ret < 0) { 833 rdev_err(rdev, "failed to apply %duV constraint\n", 834 rdev->constraints->min_uV); 835 return ret; 836 } 837 } 838 839 /* constrain machine-level voltage specs to fit 840 * the actual range supported by this regulator. 841 */ 842 if (ops->list_voltage && rdev->desc->n_voltages) { 843 int count = rdev->desc->n_voltages; 844 int i; 845 int min_uV = INT_MAX; 846 int max_uV = INT_MIN; 847 int cmin = constraints->min_uV; 848 int cmax = constraints->max_uV; 849 850 /* it's safe to autoconfigure fixed-voltage supplies 851 and the constraints are used by list_voltage. */ 852 if (count == 1 && !cmin) { 853 cmin = 1; 854 cmax = INT_MAX; 855 constraints->min_uV = cmin; 856 constraints->max_uV = cmax; 857 } 858 859 /* voltage constraints are optional */ 860 if ((cmin == 0) && (cmax == 0)) 861 return 0; 862 863 /* else require explicit machine-level constraints */ 864 if (cmin <= 0 || cmax <= 0 || cmax < cmin) { 865 rdev_err(rdev, "invalid voltage constraints\n"); 866 return -EINVAL; 867 } 868 869 /* initial: [cmin..cmax] valid, [min_uV..max_uV] not */ 870 for (i = 0; i < count; i++) { 871 int value; 872 873 value = ops->list_voltage(rdev, i); 874 if (value <= 0) 875 continue; 876 877 /* maybe adjust [min_uV..max_uV] */ 878 if (value >= cmin && value < min_uV) 879 min_uV = value; 880 if (value <= cmax && value > max_uV) 881 max_uV = value; 882 } 883 884 /* final: [min_uV..max_uV] valid iff constraints valid */ 885 if (max_uV < min_uV) { 886 rdev_err(rdev, 887 "unsupportable voltage constraints %u-%uuV\n", 888 min_uV, max_uV); 889 return -EINVAL; 890 } 891 892 /* use regulator's subset of machine constraints */ 893 if (constraints->min_uV < min_uV) { 894 rdev_dbg(rdev, "override min_uV, %d -> %d\n", 895 constraints->min_uV, min_uV); 896 constraints->min_uV = min_uV; 897 } 898 if (constraints->max_uV > max_uV) { 899 rdev_dbg(rdev, "override max_uV, %d -> %d\n", 900 constraints->max_uV, max_uV); 901 constraints->max_uV = max_uV; 902 } 903 } 904 905 return 0; 906} 907 908/** 909 * set_machine_constraints - sets regulator constraints 910 * @rdev: regulator source 911 * @constraints: constraints to apply 912 * 913 * Allows platform initialisation code to define and constrain 914 * regulator circuits e.g. valid voltage/current ranges, etc. NOTE: 915 * Constraints *must* be set by platform code in order for some 916 * regulator operations to proceed i.e. set_voltage, set_current_limit, 917 * set_mode. 918 */ 919static int set_machine_constraints(struct regulator_dev *rdev, 920 const struct regulation_constraints *constraints) 921{ 922 int ret = 0; 923 struct regulator_ops *ops = rdev->desc->ops; 924 925 if (constraints) 926 rdev->constraints = kmemdup(constraints, sizeof(*constraints), 927 GFP_KERNEL); 928 else 929 rdev->constraints = kzalloc(sizeof(*constraints), 930 GFP_KERNEL); 931 if (!rdev->constraints) 932 return -ENOMEM; 933 934 ret = machine_constraints_voltage(rdev, rdev->constraints); 935 if (ret != 0) 936 goto out; 937 938 /* do we need to setup our suspend state */ 939 if (rdev->constraints->initial_state) { 940 ret = suspend_prepare(rdev, rdev->constraints->initial_state); 941 if (ret < 0) { 942 rdev_err(rdev, "failed to set suspend state\n"); 943 goto out; 944 } 945 } 946 947 if (rdev->constraints->initial_mode) { 948 if (!ops->set_mode) { 949 rdev_err(rdev, "no set_mode operation\n"); 950 ret = -EINVAL; 951 goto out; 952 } 953 954 ret = ops->set_mode(rdev, rdev->constraints->initial_mode); 955 if (ret < 0) { 956 rdev_err(rdev, "failed to set initial mode: %d\n", ret); 957 goto out; 958 } 959 } 960 961 /* If the constraints say the regulator should be on at this point 962 * and we have control then make sure it is enabled. 963 */ 964 if ((rdev->constraints->always_on || rdev->constraints->boot_on) && 965 ops->enable) { 966 ret = ops->enable(rdev); 967 if (ret < 0) { 968 rdev_err(rdev, "failed to enable\n"); 969 goto out; 970 } 971 } 972 973 if (rdev->constraints->ramp_delay && ops->set_ramp_delay) { 974 ret = ops->set_ramp_delay(rdev, rdev->constraints->ramp_delay); 975 if (ret < 0) { 976 rdev_err(rdev, "failed to set ramp_delay\n"); 977 goto out; 978 } 979 } 980 981 print_constraints(rdev); 982 return 0; 983out: 984 kfree(rdev->constraints); 985 rdev->constraints = NULL; 986 return ret; 987} 988 989/** 990 * set_supply - set regulator supply regulator 991 * @rdev: regulator name 992 * @supply_rdev: supply regulator name 993 * 994 * Called by platform initialisation code to set the supply regulator for this 995 * regulator. This ensures that a regulators supply will also be enabled by the 996 * core if it's child is enabled. 997 */ 998static int set_supply(struct regulator_dev *rdev, 999 struct regulator_dev *supply_rdev) 1000{ 1001 int err; 1002 1003 rdev_info(rdev, "supplied by %s\n", rdev_get_name(supply_rdev)); 1004 1005 rdev->supply = create_regulator(supply_rdev, &rdev->dev, "SUPPLY"); 1006 if (rdev->supply == NULL) { 1007 err = -ENOMEM; 1008 return err; 1009 } 1010 supply_rdev->open_count++; 1011 1012 return 0; 1013} 1014 1015/** 1016 * set_consumer_device_supply - Bind a regulator to a symbolic supply 1017 * @rdev: regulator source 1018 * @consumer_dev_name: dev_name() string for device supply applies to 1019 * @supply: symbolic name for supply 1020 * 1021 * Allows platform initialisation code to map physical regulator 1022 * sources to symbolic names for supplies for use by devices. Devices 1023 * should use these symbolic names to request regulators, avoiding the 1024 * need to provide board-specific regulator names as platform data. 1025 */ 1026static int set_consumer_device_supply(struct regulator_dev *rdev, 1027 const char *consumer_dev_name, 1028 const char *supply) 1029{ 1030 struct regulator_map *node; 1031 int has_dev; 1032 1033 if (supply == NULL) 1034 return -EINVAL; 1035 1036 if (consumer_dev_name != NULL) 1037 has_dev = 1; 1038 else 1039 has_dev = 0; 1040 1041 list_for_each_entry(node, ®ulator_map_list, list) { 1042 if (node->dev_name && consumer_dev_name) { 1043 if (strcmp(node->dev_name, consumer_dev_name) != 0) 1044 continue; 1045 } else if (node->dev_name || consumer_dev_name) { 1046 continue; 1047 } 1048 1049 if (strcmp(node->supply, supply) != 0) 1050 continue; 1051 1052 pr_debug("%s: %s/%s is '%s' supply; fail %s/%s\n", 1053 consumer_dev_name, 1054 dev_name(&node->regulator->dev), 1055 node->regulator->desc->name, 1056 supply, 1057 dev_name(&rdev->dev), rdev_get_name(rdev)); 1058 return -EBUSY; 1059 } 1060 1061 node = kzalloc(sizeof(struct regulator_map), GFP_KERNEL); 1062 if (node == NULL) 1063 return -ENOMEM; 1064 1065 node->regulator = rdev; 1066 node->supply = supply; 1067 1068 if (has_dev) { 1069 node->dev_name = kstrdup(consumer_dev_name, GFP_KERNEL); 1070 if (node->dev_name == NULL) { 1071 kfree(node); 1072 return -ENOMEM; 1073 } 1074 } 1075 1076 list_add(&node->list, ®ulator_map_list); 1077 return 0; 1078} 1079 1080static void unset_regulator_supplies(struct regulator_dev *rdev) 1081{ 1082 struct regulator_map *node, *n; 1083 1084 list_for_each_entry_safe(node, n, ®ulator_map_list, list) { 1085 if (rdev == node->regulator) { 1086 list_del(&node->list); 1087 kfree(node->dev_name); 1088 kfree(node); 1089 } 1090 } 1091} 1092 1093#define REG_STR_SIZE 64 1094 1095static struct regulator *create_regulator(struct regulator_dev *rdev, 1096 struct device *dev, 1097 const char *supply_name) 1098{ 1099 struct regulator *regulator; 1100 char buf[REG_STR_SIZE]; 1101 int err, size; 1102 1103 regulator = kzalloc(sizeof(*regulator), GFP_KERNEL); 1104 if (regulator == NULL) 1105 return NULL; 1106 1107 mutex_lock(&rdev->mutex); 1108 regulator->rdev = rdev; 1109 list_add(®ulator->list, &rdev->consumer_list); 1110 1111 if (dev) { 1112 regulator->dev = dev; 1113 1114 /* Add a link to the device sysfs entry */ 1115 size = scnprintf(buf, REG_STR_SIZE, "%s-%s", 1116 dev->kobj.name, supply_name); 1117 if (size >= REG_STR_SIZE) 1118 goto overflow_err; 1119 1120 regulator->supply_name = kstrdup(buf, GFP_KERNEL); 1121 if (regulator->supply_name == NULL) 1122 goto overflow_err; 1123 1124 err = sysfs_create_link(&rdev->dev.kobj, &dev->kobj, 1125 buf); 1126 if (err) { 1127 rdev_warn(rdev, "could not add device link %s err %d\n", 1128 dev->kobj.name, err); 1129 /* non-fatal */ 1130 } 1131 } else { 1132 regulator->supply_name = kstrdup(supply_name, GFP_KERNEL); 1133 if (regulator->supply_name == NULL) 1134 goto overflow_err; 1135 } 1136 1137 regulator->debugfs = debugfs_create_dir(regulator->supply_name, 1138 rdev->debugfs); 1139 if (!regulator->debugfs) { 1140 rdev_warn(rdev, "Failed to create debugfs directory\n"); 1141 } else { 1142 debugfs_create_u32("uA_load", 0444, regulator->debugfs, 1143 ®ulator->uA_load); 1144 debugfs_create_u32("min_uV", 0444, regulator->debugfs, 1145 ®ulator->min_uV); 1146 debugfs_create_u32("max_uV", 0444, regulator->debugfs, 1147 ®ulator->max_uV); 1148 } 1149 1150 /* 1151 * Check now if the regulator is an always on regulator - if 1152 * it is then we don't need to do nearly so much work for 1153 * enable/disable calls. 1154 */ 1155 if (!_regulator_can_change_status(rdev) && 1156 _regulator_is_enabled(rdev)) 1157 regulator->always_on = true; 1158 1159 mutex_unlock(&rdev->mutex); 1160 return regulator; 1161overflow_err: 1162 list_del(®ulator->list); 1163 kfree(regulator); 1164 mutex_unlock(&rdev->mutex); 1165 return NULL; 1166} 1167 1168static int _regulator_get_enable_time(struct regulator_dev *rdev) 1169{ 1170 if (!rdev->desc->ops->enable_time) 1171 return rdev->desc->enable_time; 1172 return rdev->desc->ops->enable_time(rdev); 1173} 1174 1175static struct regulator_dev *regulator_dev_lookup(struct device *dev, 1176 const char *supply, 1177 int *ret) 1178{ 1179 struct regulator_dev *r; 1180 struct device_node *node; 1181 struct regulator_map *map; 1182 const char *devname = NULL; 1183 1184 /* first do a dt based lookup */ 1185 if (dev && dev->of_node) { 1186 node = of_get_regulator(dev, supply); 1187 if (node) { 1188 list_for_each_entry(r, ®ulator_list, list) 1189 if (r->dev.parent && 1190 node == r->dev.of_node) 1191 return r; 1192 } else { 1193 /* 1194 * If we couldn't even get the node then it's 1195 * not just that the device didn't register 1196 * yet, there's no node and we'll never 1197 * succeed. 1198 */ 1199 *ret = -ENODEV; 1200 } 1201 } 1202 1203 /* if not found, try doing it non-dt way */ 1204 if (dev) 1205 devname = dev_name(dev); 1206 1207 list_for_each_entry(r, ®ulator_list, list) 1208 if (strcmp(rdev_get_name(r), supply) == 0) 1209 return r; 1210 1211 list_for_each_entry(map, ®ulator_map_list, list) { 1212 /* If the mapping has a device set up it must match */ 1213 if (map->dev_name && 1214 (!devname || strcmp(map->dev_name, devname))) 1215 continue; 1216 1217 if (strcmp(map->supply, supply) == 0) 1218 return map->regulator; 1219 } 1220 1221 1222 return NULL; 1223} 1224 1225/* Internal regulator request function */ 1226static struct regulator *_regulator_get(struct device *dev, const char *id, 1227 int exclusive) 1228{ 1229 struct regulator_dev *rdev; 1230 struct regulator *regulator = ERR_PTR(-EPROBE_DEFER); 1231 const char *devname = NULL; 1232 int ret; 1233 1234 if (id == NULL) { 1235 pr_err("get() with no identifier\n"); 1236 return regulator; 1237 } 1238 1239 if (dev) 1240 devname = dev_name(dev); 1241 1242 mutex_lock(®ulator_list_mutex); 1243 1244 rdev = regulator_dev_lookup(dev, id, &ret); 1245 if (rdev) 1246 goto found; 1247 1248 if (board_wants_dummy_regulator) { 1249 rdev = dummy_regulator_rdev; 1250 goto found; 1251 } 1252 1253#ifdef CONFIG_REGULATOR_DUMMY 1254 if (!devname) 1255 devname = "deviceless"; 1256 1257 /* If the board didn't flag that it was fully constrained then 1258 * substitute in a dummy regulator so consumers can continue. 1259 */ 1260 if (!has_full_constraints) { 1261 pr_warn("%s supply %s not found, using dummy regulator\n", 1262 devname, id); 1263 rdev = dummy_regulator_rdev; 1264 goto found; 1265 } 1266#endif 1267 1268 mutex_unlock(®ulator_list_mutex); 1269 return regulator; 1270 1271found: 1272 if (rdev->exclusive) { 1273 regulator = ERR_PTR(-EPERM); 1274 goto out; 1275 } 1276 1277 if (exclusive && rdev->open_count) { 1278 regulator = ERR_PTR(-EBUSY); 1279 goto out; 1280 } 1281 1282 if (!try_module_get(rdev->owner)) 1283 goto out; 1284 1285 regulator = create_regulator(rdev, dev, id); 1286 if (regulator == NULL) { 1287 regulator = ERR_PTR(-ENOMEM); 1288 module_put(rdev->owner); 1289 goto out; 1290 } 1291 1292 rdev->open_count++; 1293 if (exclusive) { 1294 rdev->exclusive = 1; 1295 1296 ret = _regulator_is_enabled(rdev); 1297 if (ret > 0) 1298 rdev->use_count = 1; 1299 else 1300 rdev->use_count = 0; 1301 } 1302 1303out: 1304 mutex_unlock(®ulator_list_mutex); 1305 1306 return regulator; 1307} 1308 1309/** 1310 * regulator_get - lookup and obtain a reference to a regulator. 1311 * @dev: device for regulator "consumer" 1312 * @id: Supply name or regulator ID. 1313 * 1314 * Returns a struct regulator corresponding to the regulator producer, 1315 * or IS_ERR() condition containing errno. 1316 * 1317 * Use of supply names configured via regulator_set_device_supply() is 1318 * strongly encouraged. It is recommended that the supply name used 1319 * should match the name used for the supply and/or the relevant 1320 * device pins in the datasheet. 1321 */ 1322struct regulator *regulator_get(struct device *dev, const char *id) 1323{ 1324 return _regulator_get(dev, id, 0); 1325} 1326EXPORT_SYMBOL_GPL(regulator_get); 1327 1328static void devm_regulator_release(struct device *dev, void *res) 1329{ 1330 regulator_put(*(struct regulator **)res); 1331} 1332 1333/** 1334 * devm_regulator_get - Resource managed regulator_get() 1335 * @dev: device for regulator "consumer" 1336 * @id: Supply name or regulator ID. 1337 * 1338 * Managed regulator_get(). Regulators returned from this function are 1339 * automatically regulator_put() on driver detach. See regulator_get() for more 1340 * information. 1341 */ 1342struct regulator *devm_regulator_get(struct device *dev, const char *id) 1343{ 1344 struct regulator **ptr, *regulator; 1345 1346 ptr = devres_alloc(devm_regulator_release, sizeof(*ptr), GFP_KERNEL); 1347 if (!ptr) 1348 return ERR_PTR(-ENOMEM); 1349 1350 regulator = regulator_get(dev, id); 1351 if (!IS_ERR(regulator)) { 1352 *ptr = regulator; 1353 devres_add(dev, ptr); 1354 } else { 1355 devres_free(ptr); 1356 } 1357 1358 return regulator; 1359} 1360EXPORT_SYMBOL_GPL(devm_regulator_get); 1361 1362/** 1363 * regulator_get_exclusive - obtain exclusive access to a regulator. 1364 * @dev: device for regulator "consumer" 1365 * @id: Supply name or regulator ID. 1366 * 1367 * Returns a struct regulator corresponding to the regulator producer, 1368 * or IS_ERR() condition containing errno. Other consumers will be 1369 * unable to obtain this reference is held and the use count for the 1370 * regulator will be initialised to reflect the current state of the 1371 * regulator. 1372 * 1373 * This is intended for use by consumers which cannot tolerate shared 1374 * use of the regulator such as those which need to force the 1375 * regulator off for correct operation of the hardware they are 1376 * controlling. 1377 * 1378 * Use of supply names configured via regulator_set_device_supply() is 1379 * strongly encouraged. It is recommended that the supply name used 1380 * should match the name used for the supply and/or the relevant 1381 * device pins in the datasheet. 1382 */ 1383struct regulator *regulator_get_exclusive(struct device *dev, const char *id) 1384{ 1385 return _regulator_get(dev, id, 1); 1386} 1387EXPORT_SYMBOL_GPL(regulator_get_exclusive); 1388 1389/* Locks held by regulator_put() */ 1390static void _regulator_put(struct regulator *regulator) 1391{ 1392 struct regulator_dev *rdev; 1393 1394 if (regulator == NULL || IS_ERR(regulator)) 1395 return; 1396 1397 rdev = regulator->rdev; 1398 1399 debugfs_remove_recursive(regulator->debugfs); 1400 1401 /* remove any sysfs entries */ 1402 if (regulator->dev) 1403 sysfs_remove_link(&rdev->dev.kobj, regulator->supply_name); 1404 kfree(regulator->supply_name); 1405 list_del(®ulator->list); 1406 kfree(regulator); 1407 1408 rdev->open_count--; 1409 rdev->exclusive = 0; 1410 1411 module_put(rdev->owner); 1412} 1413 1414/** 1415 * regulator_put - "free" the regulator source 1416 * @regulator: regulator source 1417 * 1418 * Note: drivers must ensure that all regulator_enable calls made on this 1419 * regulator source are balanced by regulator_disable calls prior to calling 1420 * this function. 1421 */ 1422void regulator_put(struct regulator *regulator) 1423{ 1424 mutex_lock(®ulator_list_mutex); 1425 _regulator_put(regulator); 1426 mutex_unlock(®ulator_list_mutex); 1427} 1428EXPORT_SYMBOL_GPL(regulator_put); 1429 1430static int devm_regulator_match(struct device *dev, void *res, void *data) 1431{ 1432 struct regulator **r = res; 1433 if (!r || !*r) { 1434 WARN_ON(!r || !*r); 1435 return 0; 1436 } 1437 return *r == data; 1438} 1439 1440/** 1441 * devm_regulator_put - Resource managed regulator_put() 1442 * @regulator: regulator to free 1443 * 1444 * Deallocate a regulator allocated with devm_regulator_get(). Normally 1445 * this function will not need to be called and the resource management 1446 * code will ensure that the resource is freed. 1447 */ 1448void devm_regulator_put(struct regulator *regulator) 1449{ 1450 int rc; 1451 1452 rc = devres_release(regulator->dev, devm_regulator_release, 1453 devm_regulator_match, regulator); 1454 if (rc != 0) 1455 WARN_ON(rc); 1456} 1457EXPORT_SYMBOL_GPL(devm_regulator_put); 1458 1459static int _regulator_do_enable(struct regulator_dev *rdev) 1460{ 1461 int ret, delay; 1462 1463 /* Query before enabling in case configuration dependent. */ 1464 ret = _regulator_get_enable_time(rdev); 1465 if (ret >= 0) { 1466 delay = ret; 1467 } else { 1468 rdev_warn(rdev, "enable_time() failed: %d\n", ret); 1469 delay = 0; 1470 } 1471 1472 trace_regulator_enable(rdev_get_name(rdev)); 1473 1474 if (rdev->ena_gpio) { 1475 gpio_set_value_cansleep(rdev->ena_gpio, 1476 !rdev->ena_gpio_invert); 1477 rdev->ena_gpio_state = 1; 1478 } else if (rdev->desc->ops->enable) { 1479 ret = rdev->desc->ops->enable(rdev); 1480 if (ret < 0) 1481 return ret; 1482 } else { 1483 return -EINVAL; 1484 } 1485 1486 /* Allow the regulator to ramp; it would be useful to extend 1487 * this for bulk operations so that the regulators can ramp 1488 * together. */ 1489 trace_regulator_enable_delay(rdev_get_name(rdev)); 1490 1491 if (delay >= 1000) { 1492 mdelay(delay / 1000); 1493 udelay(delay % 1000); 1494 } else if (delay) { 1495 udelay(delay); 1496 } 1497 1498 trace_regulator_enable_complete(rdev_get_name(rdev)); 1499 1500 return 0; 1501} 1502 1503/* locks held by regulator_enable() */ 1504static int _regulator_enable(struct regulator_dev *rdev) 1505{ 1506 int ret; 1507 1508 /* check voltage and requested load before enabling */ 1509 if (rdev->constraints && 1510 (rdev->constraints->valid_ops_mask & REGULATOR_CHANGE_DRMS)) 1511 drms_uA_update(rdev); 1512 1513 if (rdev->use_count == 0) { 1514 /* The regulator may on if it's not switchable or left on */ 1515 ret = _regulator_is_enabled(rdev); 1516 if (ret == -EINVAL || ret == 0) { 1517 if (!_regulator_can_change_status(rdev)) 1518 return -EPERM; 1519 1520 ret = _regulator_do_enable(rdev); 1521 if (ret < 0) 1522 return ret; 1523 1524 } else if (ret < 0) { 1525 rdev_err(rdev, "is_enabled() failed: %d\n", ret); 1526 return ret; 1527 } 1528 /* Fallthrough on positive return values - already enabled */ 1529 } 1530 1531 rdev->use_count++; 1532 1533 return 0; 1534} 1535 1536/** 1537 * regulator_enable - enable regulator output 1538 * @regulator: regulator source 1539 * 1540 * Request that the regulator be enabled with the regulator output at 1541 * the predefined voltage or current value. Calls to regulator_enable() 1542 * must be balanced with calls to regulator_disable(). 1543 * 1544 * NOTE: the output value can be set by other drivers, boot loader or may be 1545 * hardwired in the regulator. 1546 */ 1547int regulator_enable(struct regulator *regulator) 1548{ 1549 struct regulator_dev *rdev = regulator->rdev; 1550 int ret = 0; 1551 1552 if (regulator->always_on) 1553 return 0; 1554 1555 if (rdev->supply) { 1556 ret = regulator_enable(rdev->supply); 1557 if (ret != 0) 1558 return ret; 1559 } 1560 1561 mutex_lock(&rdev->mutex); 1562 ret = _regulator_enable(rdev); 1563 mutex_unlock(&rdev->mutex); 1564 1565 if (ret != 0 && rdev->supply) 1566 regulator_disable(rdev->supply); 1567 1568 return ret; 1569} 1570EXPORT_SYMBOL_GPL(regulator_enable); 1571 1572static int _regulator_do_disable(struct regulator_dev *rdev) 1573{ 1574 int ret; 1575 1576 trace_regulator_disable(rdev_get_name(rdev)); 1577 1578 if (rdev->ena_gpio) { 1579 gpio_set_value_cansleep(rdev->ena_gpio, 1580 rdev->ena_gpio_invert); 1581 rdev->ena_gpio_state = 0; 1582 1583 } else if (rdev->desc->ops->disable) { 1584 ret = rdev->desc->ops->disable(rdev); 1585 if (ret != 0) 1586 return ret; 1587 } 1588 1589 trace_regulator_disable_complete(rdev_get_name(rdev)); 1590 1591 _notifier_call_chain(rdev, REGULATOR_EVENT_DISABLE, 1592 NULL); 1593 return 0; 1594} 1595 1596/* locks held by regulator_disable() */ 1597static int _regulator_disable(struct regulator_dev *rdev) 1598{ 1599 int ret = 0; 1600 1601 if (WARN(rdev->use_count <= 0, 1602 "unbalanced disables for %s\n", rdev_get_name(rdev))) 1603 return -EIO; 1604 1605 /* are we the last user and permitted to disable ? */ 1606 if (rdev->use_count == 1 && 1607 (rdev->constraints && !rdev->constraints->always_on)) { 1608 1609 /* we are last user */ 1610 if (_regulator_can_change_status(rdev)) { 1611 ret = _regulator_do_disable(rdev); 1612 if (ret < 0) { 1613 rdev_err(rdev, "failed to disable\n"); 1614 return ret; 1615 } 1616 } 1617 1618 rdev->use_count = 0; 1619 } else if (rdev->use_count > 1) { 1620 1621 if (rdev->constraints && 1622 (rdev->constraints->valid_ops_mask & 1623 REGULATOR_CHANGE_DRMS)) 1624 drms_uA_update(rdev); 1625 1626 rdev->use_count--; 1627 } 1628 1629 return ret; 1630} 1631 1632/** 1633 * regulator_disable - disable regulator output 1634 * @regulator: regulator source 1635 * 1636 * Disable the regulator output voltage or current. Calls to 1637 * regulator_enable() must be balanced with calls to 1638 * regulator_disable(). 1639 * 1640 * NOTE: this will only disable the regulator output if no other consumer 1641 * devices have it enabled, the regulator device supports disabling and 1642 * machine constraints permit this operation. 1643 */ 1644int regulator_disable(struct regulator *regulator) 1645{ 1646 struct regulator_dev *rdev = regulator->rdev; 1647 int ret = 0; 1648 1649 if (regulator->always_on) 1650 return 0; 1651 1652 mutex_lock(&rdev->mutex); 1653 ret = _regulator_disable(rdev); 1654 mutex_unlock(&rdev->mutex); 1655 1656 if (ret == 0 && rdev->supply) 1657 regulator_disable(rdev->supply); 1658 1659 return ret; 1660} 1661EXPORT_SYMBOL_GPL(regulator_disable); 1662 1663/* locks held by regulator_force_disable() */ 1664static int _regulator_force_disable(struct regulator_dev *rdev) 1665{ 1666 int ret = 0; 1667 1668 /* force disable */ 1669 if (rdev->desc->ops->disable) { 1670 /* ah well, who wants to live forever... */ 1671 ret = rdev->desc->ops->disable(rdev); 1672 if (ret < 0) { 1673 rdev_err(rdev, "failed to force disable\n"); 1674 return ret; 1675 } 1676 /* notify other consumers that power has been forced off */ 1677 _notifier_call_chain(rdev, REGULATOR_EVENT_FORCE_DISABLE | 1678 REGULATOR_EVENT_DISABLE, NULL); 1679 } 1680 1681 return ret; 1682} 1683 1684/** 1685 * regulator_force_disable - force disable regulator output 1686 * @regulator: regulator source 1687 * 1688 * Forcibly disable the regulator output voltage or current. 1689 * NOTE: this *will* disable the regulator output even if other consumer 1690 * devices have it enabled. This should be used for situations when device 1691 * damage will likely occur if the regulator is not disabled (e.g. over temp). 1692 */ 1693int regulator_force_disable(struct regulator *regulator) 1694{ 1695 struct regulator_dev *rdev = regulator->rdev; 1696 int ret; 1697 1698 mutex_lock(&rdev->mutex); 1699 regulator->uA_load = 0; 1700 ret = _regulator_force_disable(regulator->rdev); 1701 mutex_unlock(&rdev->mutex); 1702 1703 if (rdev->supply) 1704 while (rdev->open_count--) 1705 regulator_disable(rdev->supply); 1706 1707 return ret; 1708} 1709EXPORT_SYMBOL_GPL(regulator_force_disable); 1710 1711static void regulator_disable_work(struct work_struct *work) 1712{ 1713 struct regulator_dev *rdev = container_of(work, struct regulator_dev, 1714 disable_work.work); 1715 int count, i, ret; 1716 1717 mutex_lock(&rdev->mutex); 1718 1719 BUG_ON(!rdev->deferred_disables); 1720 1721 count = rdev->deferred_disables; 1722 rdev->deferred_disables = 0; 1723 1724 for (i = 0; i < count; i++) { 1725 ret = _regulator_disable(rdev); 1726 if (ret != 0) 1727 rdev_err(rdev, "Deferred disable failed: %d\n", ret); 1728 } 1729 1730 mutex_unlock(&rdev->mutex); 1731 1732 if (rdev->supply) { 1733 for (i = 0; i < count; i++) { 1734 ret = regulator_disable(rdev->supply); 1735 if (ret != 0) { 1736 rdev_err(rdev, 1737 "Supply disable failed: %d\n", ret); 1738 } 1739 } 1740 } 1741} 1742 1743/** 1744 * regulator_disable_deferred - disable regulator output with delay 1745 * @regulator: regulator source 1746 * @ms: miliseconds until the regulator is disabled 1747 * 1748 * Execute regulator_disable() on the regulator after a delay. This 1749 * is intended for use with devices that require some time to quiesce. 1750 * 1751 * NOTE: this will only disable the regulator output if no other consumer 1752 * devices have it enabled, the regulator device supports disabling and 1753 * machine constraints permit this operation. 1754 */ 1755int regulator_disable_deferred(struct regulator *regulator, int ms) 1756{ 1757 struct regulator_dev *rdev = regulator->rdev; 1758 int ret; 1759 1760 if (regulator->always_on) 1761 return 0; 1762 1763 if (!ms) 1764 return regulator_disable(regulator); 1765 1766 mutex_lock(&rdev->mutex); 1767 rdev->deferred_disables++; 1768 mutex_unlock(&rdev->mutex); 1769 1770 ret = schedule_delayed_work(&rdev->disable_work, 1771 msecs_to_jiffies(ms)); 1772 if (ret < 0) 1773 return ret; 1774 else 1775 return 0; 1776} 1777EXPORT_SYMBOL_GPL(regulator_disable_deferred); 1778 1779/** 1780 * regulator_is_enabled_regmap - standard is_enabled() for regmap users 1781 * 1782 * @rdev: regulator to operate on 1783 * 1784 * Regulators that use regmap for their register I/O can set the 1785 * enable_reg and enable_mask fields in their descriptor and then use 1786 * this as their is_enabled operation, saving some code. 1787 */ 1788int regulator_is_enabled_regmap(struct regulator_dev *rdev) 1789{ 1790 unsigned int val; 1791 int ret; 1792 1793 ret = regmap_read(rdev->regmap, rdev->desc->enable_reg, &val); 1794 if (ret != 0) 1795 return ret; 1796 1797 return (val & rdev->desc->enable_mask) != 0; 1798} 1799EXPORT_SYMBOL_GPL(regulator_is_enabled_regmap); 1800 1801/** 1802 * regulator_enable_regmap - standard enable() for regmap users 1803 * 1804 * @rdev: regulator to operate on 1805 * 1806 * Regulators that use regmap for their register I/O can set the 1807 * enable_reg and enable_mask fields in their descriptor and then use 1808 * this as their enable() operation, saving some code. 1809 */ 1810int regulator_enable_regmap(struct regulator_dev *rdev) 1811{ 1812 return regmap_update_bits(rdev->regmap, rdev->desc->enable_reg, 1813 rdev->desc->enable_mask, 1814 rdev->desc->enable_mask); 1815} 1816EXPORT_SYMBOL_GPL(regulator_enable_regmap); 1817 1818/** 1819 * regulator_disable_regmap - standard disable() for regmap users 1820 * 1821 * @rdev: regulator to operate on 1822 * 1823 * Regulators that use regmap for their register I/O can set the 1824 * enable_reg and enable_mask fields in their descriptor and then use 1825 * this as their disable() operation, saving some code. 1826 */ 1827int regulator_disable_regmap(struct regulator_dev *rdev) 1828{ 1829 return regmap_update_bits(rdev->regmap, rdev->desc->enable_reg, 1830 rdev->desc->enable_mask, 0); 1831} 1832EXPORT_SYMBOL_GPL(regulator_disable_regmap); 1833 1834static int _regulator_is_enabled(struct regulator_dev *rdev) 1835{ 1836 /* A GPIO control always takes precedence */ 1837 if (rdev->ena_gpio) 1838 return rdev->ena_gpio_state; 1839 1840 /* If we don't know then assume that the regulator is always on */ 1841 if (!rdev->desc->ops->is_enabled) 1842 return 1; 1843 1844 return rdev->desc->ops->is_enabled(rdev); 1845} 1846 1847/** 1848 * regulator_is_enabled - is the regulator output enabled 1849 * @regulator: regulator source 1850 * 1851 * Returns positive if the regulator driver backing the source/client 1852 * has requested that the device be enabled, zero if it hasn't, else a 1853 * negative errno code. 1854 * 1855 * Note that the device backing this regulator handle can have multiple 1856 * users, so it might be enabled even if regulator_enable() was never 1857 * called for this particular source. 1858 */ 1859int regulator_is_enabled(struct regulator *regulator) 1860{ 1861 int ret; 1862 1863 if (regulator->always_on) 1864 return 1; 1865 1866 mutex_lock(®ulator->rdev->mutex); 1867 ret = _regulator_is_enabled(regulator->rdev); 1868 mutex_unlock(®ulator->rdev->mutex); 1869 1870 return ret; 1871} 1872EXPORT_SYMBOL_GPL(regulator_is_enabled); 1873 1874/** 1875 * regulator_count_voltages - count regulator_list_voltage() selectors 1876 * @regulator: regulator source 1877 * 1878 * Returns number of selectors, or negative errno. Selectors are 1879 * numbered starting at zero, and typically correspond to bitfields 1880 * in hardware registers. 1881 */ 1882int regulator_count_voltages(struct regulator *regulator) 1883{ 1884 struct regulator_dev *rdev = regulator->rdev; 1885 1886 return rdev->desc->n_voltages ? : -EINVAL; 1887} 1888EXPORT_SYMBOL_GPL(regulator_count_voltages); 1889 1890/** 1891 * regulator_list_voltage_linear - List voltages with simple calculation 1892 * 1893 * @rdev: Regulator device 1894 * @selector: Selector to convert into a voltage 1895 * 1896 * Regulators with a simple linear mapping between voltages and 1897 * selectors can set min_uV and uV_step in the regulator descriptor 1898 * and then use this function as their list_voltage() operation, 1899 */ 1900int regulator_list_voltage_linear(struct regulator_dev *rdev, 1901 unsigned int selector) 1902{ 1903 if (selector >= rdev->desc->n_voltages) 1904 return -EINVAL; 1905 1906 return rdev->desc->min_uV + (rdev->desc->uV_step * selector); 1907} 1908EXPORT_SYMBOL_GPL(regulator_list_voltage_linear); 1909 1910/** 1911 * regulator_list_voltage_table - List voltages with table based mapping 1912 * 1913 * @rdev: Regulator device 1914 * @selector: Selector to convert into a voltage 1915 * 1916 * Regulators with table based mapping between voltages and 1917 * selectors can set volt_table in the regulator descriptor 1918 * and then use this function as their list_voltage() operation. 1919 */ 1920int regulator_list_voltage_table(struct regulator_dev *rdev, 1921 unsigned int selector) 1922{ 1923 if (!rdev->desc->volt_table) { 1924 BUG_ON(!rdev->desc->volt_table); 1925 return -EINVAL; 1926 } 1927 1928 if (selector >= rdev->desc->n_voltages) 1929 return -EINVAL; 1930 1931 return rdev->desc->volt_table[selector]; 1932} 1933EXPORT_SYMBOL_GPL(regulator_list_voltage_table); 1934 1935/** 1936 * regulator_list_voltage - enumerate supported voltages 1937 * @regulator: regulator source 1938 * @selector: identify voltage to list 1939 * Context: can sleep 1940 * 1941 * Returns a voltage that can be passed to @regulator_set_voltage(), 1942 * zero if this selector code can't be used on this system, or a 1943 * negative errno. 1944 */ 1945int regulator_list_voltage(struct regulator *regulator, unsigned selector) 1946{ 1947 struct regulator_dev *rdev = regulator->rdev; 1948 struct regulator_ops *ops = rdev->desc->ops; 1949 int ret; 1950 1951 if (!ops->list_voltage || selector >= rdev->desc->n_voltages) 1952 return -EINVAL; 1953 1954 mutex_lock(&rdev->mutex); 1955 ret = ops->list_voltage(rdev, selector); 1956 mutex_unlock(&rdev->mutex); 1957 1958 if (ret > 0) { 1959 if (ret < rdev->constraints->min_uV) 1960 ret = 0; 1961 else if (ret > rdev->constraints->max_uV) 1962 ret = 0; 1963 } 1964 1965 return ret; 1966} 1967EXPORT_SYMBOL_GPL(regulator_list_voltage); 1968 1969/** 1970 * regulator_is_supported_voltage - check if a voltage range can be supported 1971 * 1972 * @regulator: Regulator to check. 1973 * @min_uV: Minimum required voltage in uV. 1974 * @max_uV: Maximum required voltage in uV. 1975 * 1976 * Returns a boolean or a negative error code. 1977 */ 1978int regulator_is_supported_voltage(struct regulator *regulator, 1979 int min_uV, int max_uV) 1980{ 1981 struct regulator_dev *rdev = regulator->rdev; 1982 int i, voltages, ret; 1983 1984 /* If we can't change voltage check the current voltage */ 1985 if (!(rdev->constraints->valid_ops_mask & REGULATOR_CHANGE_VOLTAGE)) { 1986 ret = regulator_get_voltage(regulator); 1987 if (ret >= 0) 1988 return (min_uV <= ret && ret <= max_uV); 1989 else 1990 return ret; 1991 } 1992 1993 ret = regulator_count_voltages(regulator); 1994 if (ret < 0) 1995 return ret; 1996 voltages = ret; 1997 1998 for (i = 0; i < voltages; i++) { 1999 ret = regulator_list_voltage(regulator, i); 2000 2001 if (ret >= min_uV && ret <= max_uV) 2002 return 1; 2003 } 2004 2005 return 0; 2006} 2007EXPORT_SYMBOL_GPL(regulator_is_supported_voltage); 2008 2009/** 2010 * regulator_get_voltage_sel_regmap - standard get_voltage_sel for regmap users 2011 * 2012 * @rdev: regulator to operate on 2013 * 2014 * Regulators that use regmap for their register I/O can set the 2015 * vsel_reg and vsel_mask fields in their descriptor and then use this 2016 * as their get_voltage_vsel operation, saving some code. 2017 */ 2018int regulator_get_voltage_sel_regmap(struct regulator_dev *rdev) 2019{ 2020 unsigned int val; 2021 int ret; 2022 2023 ret = regmap_read(rdev->regmap, rdev->desc->vsel_reg, &val); 2024 if (ret != 0) 2025 return ret; 2026 2027 val &= rdev->desc->vsel_mask; 2028 val >>= ffs(rdev->desc->vsel_mask) - 1; 2029 2030 return val; 2031} 2032EXPORT_SYMBOL_GPL(regulator_get_voltage_sel_regmap); 2033 2034/** 2035 * regulator_set_voltage_sel_regmap - standard set_voltage_sel for regmap users 2036 * 2037 * @rdev: regulator to operate on 2038 * @sel: Selector to set 2039 * 2040 * Regulators that use regmap for their register I/O can set the 2041 * vsel_reg and vsel_mask fields in their descriptor and then use this 2042 * as their set_voltage_vsel operation, saving some code. 2043 */ 2044int regulator_set_voltage_sel_regmap(struct regulator_dev *rdev, unsigned sel) 2045{ 2046 sel <<= ffs(rdev->desc->vsel_mask) - 1; 2047 2048 return regmap_update_bits(rdev->regmap, rdev->desc->vsel_reg, 2049 rdev->desc->vsel_mask, sel); 2050} 2051EXPORT_SYMBOL_GPL(regulator_set_voltage_sel_regmap); 2052 2053/** 2054 * regulator_map_voltage_iterate - map_voltage() based on list_voltage() 2055 * 2056 * @rdev: Regulator to operate on 2057 * @min_uV: Lower bound for voltage 2058 * @max_uV: Upper bound for voltage 2059 * 2060 * Drivers implementing set_voltage_sel() and list_voltage() can use 2061 * this as their map_voltage() operation. It will find a suitable 2062 * voltage by calling list_voltage() until it gets something in bounds 2063 * for the requested voltages. 2064 */ 2065int regulator_map_voltage_iterate(struct regulator_dev *rdev, 2066 int min_uV, int max_uV) 2067{ 2068 int best_val = INT_MAX; 2069 int selector = 0; 2070 int i, ret; 2071 2072 /* Find the smallest voltage that falls within the specified 2073 * range. 2074 */ 2075 for (i = 0; i < rdev->desc->n_voltages; i++) { 2076 ret = rdev->desc->ops->list_voltage(rdev, i); 2077 if (ret < 0) 2078 continue; 2079 2080 if (ret < best_val && ret >= min_uV && ret <= max_uV) { 2081 best_val = ret; 2082 selector = i; 2083 } 2084 } 2085 2086 if (best_val != INT_MAX) 2087 return selector; 2088 else 2089 return -EINVAL; 2090} 2091EXPORT_SYMBOL_GPL(regulator_map_voltage_iterate); 2092 2093/** 2094 * regulator_map_voltage_linear - map_voltage() for simple linear mappings 2095 * 2096 * @rdev: Regulator to operate on 2097 * @min_uV: Lower bound for voltage 2098 * @max_uV: Upper bound for voltage 2099 * 2100 * Drivers providing min_uV and uV_step in their regulator_desc can 2101 * use this as their map_voltage() operation. 2102 */ 2103int regulator_map_voltage_linear(struct regulator_dev *rdev, 2104 int min_uV, int max_uV) 2105{ 2106 int ret, voltage; 2107 2108 /* Allow uV_step to be 0 for fixed voltage */ 2109 if (rdev->desc->n_voltages == 1 && rdev->desc->uV_step == 0) { 2110 if (min_uV <= rdev->desc->min_uV && rdev->desc->min_uV <= max_uV) 2111 return 0; 2112 else 2113 return -EINVAL; 2114 } 2115 2116 if (!rdev->desc->uV_step) { 2117 BUG_ON(!rdev->desc->uV_step); 2118 return -EINVAL; 2119 } 2120 2121 if (min_uV < rdev->desc->min_uV) 2122 min_uV = rdev->desc->min_uV; 2123 2124 ret = DIV_ROUND_UP(min_uV - rdev->desc->min_uV, rdev->desc->uV_step); 2125 if (ret < 0) 2126 return ret; 2127 2128 /* Map back into a voltage to verify we're still in bounds */ 2129 voltage = rdev->desc->ops->list_voltage(rdev, ret); 2130 if (voltage < min_uV || voltage > max_uV) 2131 return -EINVAL; 2132 2133 return ret; 2134} 2135EXPORT_SYMBOL_GPL(regulator_map_voltage_linear); 2136 2137static int _regulator_do_set_voltage(struct regulator_dev *rdev, 2138 int min_uV, int max_uV) 2139{ 2140 int ret; 2141 int delay = 0; 2142 int best_val = 0; 2143 unsigned int selector; 2144 int old_selector = -1; 2145 2146 trace_regulator_set_voltage(rdev_get_name(rdev), min_uV, max_uV); 2147 2148 min_uV += rdev->constraints->uV_offset; 2149 max_uV += rdev->constraints->uV_offset; 2150 2151 /* 2152 * If we can't obtain the old selector there is not enough 2153 * info to call set_voltage_time_sel(). 2154 */ 2155 if (_regulator_is_enabled(rdev) && 2156 rdev->desc->ops->set_voltage_time_sel && 2157 rdev->desc->ops->get_voltage_sel) { 2158 old_selector = rdev->desc->ops->get_voltage_sel(rdev); 2159 if (old_selector < 0) 2160 return old_selector; 2161 } 2162 2163 if (rdev->desc->ops->set_voltage) { 2164 ret = rdev->desc->ops->set_voltage(rdev, min_uV, max_uV, 2165 &selector); 2166 2167 if (ret >= 0) { 2168 if (rdev->desc->ops->list_voltage) 2169 best_val = rdev->desc->ops->list_voltage(rdev, 2170 selector); 2171 else 2172 best_val = _regulator_get_voltage(rdev); 2173 } 2174 2175 } else if (rdev->desc->ops->set_voltage_sel) { 2176 if (rdev->desc->ops->map_voltage) { 2177 ret = rdev->desc->ops->map_voltage(rdev, min_uV, 2178 max_uV); 2179 } else { 2180 if (rdev->desc->ops->list_voltage == 2181 regulator_list_voltage_linear) 2182 ret = regulator_map_voltage_linear(rdev, 2183 min_uV, max_uV); 2184 else 2185 ret = regulator_map_voltage_iterate(rdev, 2186 min_uV, max_uV); 2187 } 2188 2189 if (ret >= 0) { 2190 best_val = rdev->desc->ops->list_voltage(rdev, ret); 2191 if (min_uV <= best_val && max_uV >= best_val) { 2192 selector = ret; 2193 ret = rdev->desc->ops->set_voltage_sel(rdev, 2194 ret); 2195 } else { 2196 ret = -EINVAL; 2197 } 2198 } 2199 } else { 2200 ret = -EINVAL; 2201 } 2202 2203 /* Call set_voltage_time_sel if successfully obtained old_selector */ 2204 if (ret == 0 && _regulator_is_enabled(rdev) && old_selector >= 0 && 2205 rdev->desc->ops->set_voltage_time_sel) { 2206 2207 delay = rdev->desc->ops->set_voltage_time_sel(rdev, 2208 old_selector, selector); 2209 if (delay < 0) { 2210 rdev_warn(rdev, "set_voltage_time_sel() failed: %d\n", 2211 delay); 2212 delay = 0; 2213 } 2214 2215 /* Insert any necessary delays */ 2216 if (delay >= 1000) { 2217 mdelay(delay / 1000); 2218 udelay(delay % 1000); 2219 } else if (delay) { 2220 udelay(delay); 2221 } 2222 } 2223 2224 if (ret == 0 && best_val >= 0) { 2225 unsigned long data = best_val; 2226 2227 _notifier_call_chain(rdev, REGULATOR_EVENT_VOLTAGE_CHANGE, 2228 (void *)data); 2229 } 2230 2231 trace_regulator_set_voltage_complete(rdev_get_name(rdev), best_val); 2232 2233 return ret; 2234} 2235 2236/** 2237 * regulator_set_voltage - set regulator output voltage 2238 * @regulator: regulator source 2239 * @min_uV: Minimum required voltage in uV 2240 * @max_uV: Maximum acceptable voltage in uV 2241 * 2242 * Sets a voltage regulator to the desired output voltage. This can be set 2243 * during any regulator state. IOW, regulator can be disabled or enabled. 2244 * 2245 * If the regulator is enabled then the voltage will change to the new value 2246 * immediately otherwise if the regulator is disabled the regulator will 2247 * output at the new voltage when enabled. 2248 * 2249 * NOTE: If the regulator is shared between several devices then the lowest 2250 * request voltage that meets the system constraints will be used. 2251 * Regulator system constraints must be set for this regulator before 2252 * calling this function otherwise this call will fail. 2253 */ 2254int regulator_set_voltage(struct regulator *regulator, int min_uV, int max_uV) 2255{ 2256 struct regulator_dev *rdev = regulator->rdev; 2257 int ret = 0; 2258 2259 mutex_lock(&rdev->mutex); 2260 2261 /* If we're setting the same range as last time the change 2262 * should be a noop (some cpufreq implementations use the same 2263 * voltage for multiple frequencies, for example). 2264 */ 2265 if (regulator->min_uV == min_uV && regulator->max_uV == max_uV) 2266 goto out; 2267 2268 /* sanity check */ 2269 if (!rdev->desc->ops->set_voltage && 2270 !rdev->desc->ops->set_voltage_sel) { 2271 ret = -EINVAL; 2272 goto out; 2273 } 2274 2275 /* constraints check */ 2276 ret = regulator_check_voltage(rdev, &min_uV, &max_uV); 2277 if (ret < 0) 2278 goto out; 2279 regulator->min_uV = min_uV; 2280 regulator->max_uV = max_uV; 2281 2282 ret = regulator_check_consumers(rdev, &min_uV, &max_uV); 2283 if (ret < 0) 2284 goto out; 2285 2286 ret = _regulator_do_set_voltage(rdev, min_uV, max_uV); 2287 2288out: 2289 mutex_unlock(&rdev->mutex); 2290 return ret; 2291} 2292EXPORT_SYMBOL_GPL(regulator_set_voltage); 2293 2294/** 2295 * regulator_set_voltage_time - get raise/fall time 2296 * @regulator: regulator source 2297 * @old_uV: starting voltage in microvolts 2298 * @new_uV: target voltage in microvolts 2299 * 2300 * Provided with the starting and ending voltage, this function attempts to 2301 * calculate the time in microseconds required to rise or fall to this new 2302 * voltage. 2303 */ 2304int regulator_set_voltage_time(struct regulator *regulator, 2305 int old_uV, int new_uV) 2306{ 2307 struct regulator_dev *rdev = regulator->rdev; 2308 struct regulator_ops *ops = rdev->desc->ops; 2309 int old_sel = -1; 2310 int new_sel = -1; 2311 int voltage; 2312 int i; 2313 2314 /* Currently requires operations to do this */ 2315 if (!ops->list_voltage || !ops->set_voltage_time_sel 2316 || !rdev->desc->n_voltages) 2317 return -EINVAL; 2318 2319 for (i = 0; i < rdev->desc->n_voltages; i++) { 2320 /* We only look for exact voltage matches here */ 2321 voltage = regulator_list_voltage(regulator, i); 2322 if (voltage < 0) 2323 return -EINVAL; 2324 if (voltage == 0) 2325 continue; 2326 if (voltage == old_uV) 2327 old_sel = i; 2328 if (voltage == new_uV) 2329 new_sel = i; 2330 } 2331 2332 if (old_sel < 0 || new_sel < 0) 2333 return -EINVAL; 2334 2335 return ops->set_voltage_time_sel(rdev, old_sel, new_sel); 2336} 2337EXPORT_SYMBOL_GPL(regulator_set_voltage_time); 2338 2339/** 2340 * regulator_set_voltage_time_sel - get raise/fall time 2341 * @rdev: regulator source device 2342 * @old_selector: selector for starting voltage 2343 * @new_selector: selector for target voltage 2344 * 2345 * Provided with the starting and target voltage selectors, this function 2346 * returns time in microseconds required to rise or fall to this new voltage 2347 * 2348 * Drivers providing ramp_delay in regulation_constraints can use this as their 2349 * set_voltage_time_sel() operation. 2350 */ 2351int regulator_set_voltage_time_sel(struct regulator_dev *rdev, 2352 unsigned int old_selector, 2353 unsigned int new_selector) 2354{ 2355 unsigned int ramp_delay = 0; 2356 int old_volt, new_volt; 2357 2358 if (rdev->constraints->ramp_delay) 2359 ramp_delay = rdev->constraints->ramp_delay; 2360 else if (rdev->desc->ramp_delay) 2361 ramp_delay = rdev->desc->ramp_delay; 2362 2363 if (ramp_delay == 0) { 2364 rdev_warn(rdev, "ramp_delay not set\n"); 2365 return 0; 2366 } 2367 2368 /* sanity check */ 2369 if (!rdev->desc->ops->list_voltage) 2370 return -EINVAL; 2371 2372 old_volt = rdev->desc->ops->list_voltage(rdev, old_selector); 2373 new_volt = rdev->desc->ops->list_voltage(rdev, new_selector); 2374 2375 return DIV_ROUND_UP(abs(new_volt - old_volt), ramp_delay); 2376} 2377EXPORT_SYMBOL_GPL(regulator_set_voltage_time_sel); 2378 2379/** 2380 * regulator_sync_voltage - re-apply last regulator output voltage 2381 * @regulator: regulator source 2382 * 2383 * Re-apply the last configured voltage. This is intended to be used 2384 * where some external control source the consumer is cooperating with 2385 * has caused the configured voltage to change. 2386 */ 2387int regulator_sync_voltage(struct regulator *regulator) 2388{ 2389 struct regulator_dev *rdev = regulator->rdev; 2390 int ret, min_uV, max_uV; 2391 2392 mutex_lock(&rdev->mutex); 2393 2394 if (!rdev->desc->ops->set_voltage && 2395 !rdev->desc->ops->set_voltage_sel) { 2396 ret = -EINVAL; 2397 goto out; 2398 } 2399 2400 /* This is only going to work if we've had a voltage configured. */ 2401 if (!regulator->min_uV && !regulator->max_uV) { 2402 ret = -EINVAL; 2403 goto out; 2404 } 2405 2406 min_uV = regulator->min_uV; 2407 max_uV = regulator->max_uV; 2408 2409 /* This should be a paranoia check... */ 2410 ret = regulator_check_voltage(rdev, &min_uV, &max_uV); 2411 if (ret < 0) 2412 goto out; 2413 2414 ret = regulator_check_consumers(rdev, &min_uV, &max_uV); 2415 if (ret < 0) 2416 goto out; 2417 2418 ret = _regulator_do_set_voltage(rdev, min_uV, max_uV); 2419 2420out: 2421 mutex_unlock(&rdev->mutex); 2422 return ret; 2423} 2424EXPORT_SYMBOL_GPL(regulator_sync_voltage); 2425 2426static int _regulator_get_voltage(struct regulator_dev *rdev) 2427{ 2428 int sel, ret; 2429 2430 if (rdev->desc->ops->get_voltage_sel) { 2431 sel = rdev->desc->ops->get_voltage_sel(rdev); 2432 if (sel < 0) 2433 return sel; 2434 ret = rdev->desc->ops->list_voltage(rdev, sel); 2435 } else if (rdev->desc->ops->get_voltage) { 2436 ret = rdev->desc->ops->get_voltage(rdev); 2437 } else if (rdev->desc->ops->list_voltage) { 2438 ret = rdev->desc->ops->list_voltage(rdev, 0); 2439 } else { 2440 return -EINVAL; 2441 } 2442 2443 if (ret < 0) 2444 return ret; 2445 return ret - rdev->constraints->uV_offset; 2446} 2447 2448/** 2449 * regulator_get_voltage - get regulator output voltage 2450 * @regulator: regulator source 2451 * 2452 * This returns the current regulator voltage in uV. 2453 * 2454 * NOTE: If the regulator is disabled it will return the voltage value. This 2455 * function should not be used to determine regulator state. 2456 */ 2457int regulator_get_voltage(struct regulator *regulator) 2458{ 2459 int ret; 2460 2461 mutex_lock(®ulator->rdev->mutex); 2462 2463 ret = _regulator_get_voltage(regulator->rdev); 2464 2465 mutex_unlock(®ulator->rdev->mutex); 2466 2467 return ret; 2468} 2469EXPORT_SYMBOL_GPL(regulator_get_voltage); 2470 2471/** 2472 * regulator_set_current_limit - set regulator output current limit 2473 * @regulator: regulator source 2474 * @min_uA: Minimuum supported current in uA 2475 * @max_uA: Maximum supported current in uA 2476 * 2477 * Sets current sink to the desired output current. This can be set during 2478 * any regulator state. IOW, regulator can be disabled or enabled. 2479 * 2480 * If the regulator is enabled then the current will change to the new value 2481 * immediately otherwise if the regulator is disabled the regulator will 2482 * output at the new current when enabled. 2483 * 2484 * NOTE: Regulator system constraints must be set for this regulator before 2485 * calling this function otherwise this call will fail. 2486 */ 2487int regulator_set_current_limit(struct regulator *regulator, 2488 int min_uA, int max_uA) 2489{ 2490 struct regulator_dev *rdev = regulator->rdev; 2491 int ret; 2492 2493 mutex_lock(&rdev->mutex); 2494 2495 /* sanity check */ 2496 if (!rdev->desc->ops->set_current_limit) { 2497 ret = -EINVAL; 2498 goto out; 2499 } 2500 2501 /* constraints check */ 2502 ret = regulator_check_current_limit(rdev, &min_uA, &max_uA); 2503 if (ret < 0) 2504 goto out; 2505 2506 ret = rdev->desc->ops->set_current_limit(rdev, min_uA, max_uA); 2507out: 2508 mutex_unlock(&rdev->mutex); 2509 return ret; 2510} 2511EXPORT_SYMBOL_GPL(regulator_set_current_limit); 2512 2513static int _regulator_get_current_limit(struct regulator_dev *rdev) 2514{ 2515 int ret; 2516 2517 mutex_lock(&rdev->mutex); 2518 2519 /* sanity check */ 2520 if (!rdev->desc->ops->get_current_limit) { 2521 ret = -EINVAL; 2522 goto out; 2523 } 2524 2525 ret = rdev->desc->ops->get_current_limit(rdev); 2526out: 2527 mutex_unlock(&rdev->mutex); 2528 return ret; 2529} 2530 2531/** 2532 * regulator_get_current_limit - get regulator output current 2533 * @regulator: regulator source 2534 * 2535 * This returns the current supplied by the specified current sink in uA. 2536 * 2537 * NOTE: If the regulator is disabled it will return the current value. This 2538 * function should not be used to determine regulator state. 2539 */ 2540int regulator_get_current_limit(struct regulator *regulator) 2541{ 2542 return _regulator_get_current_limit(regulator->rdev); 2543} 2544EXPORT_SYMBOL_GPL(regulator_get_current_limit); 2545 2546/** 2547 * regulator_set_mode - set regulator operating mode 2548 * @regulator: regulator source 2549 * @mode: operating mode - one of the REGULATOR_MODE constants 2550 * 2551 * Set regulator operating mode to increase regulator efficiency or improve 2552 * regulation performance. 2553 * 2554 * NOTE: Regulator system constraints must be set for this regulator before 2555 * calling this function otherwise this call will fail. 2556 */ 2557int regulator_set_mode(struct regulator *regulator, unsigned int mode) 2558{ 2559 struct regulator_dev *rdev = regulator->rdev; 2560 int ret; 2561 int regulator_curr_mode; 2562 2563 mutex_lock(&rdev->mutex); 2564 2565 /* sanity check */ 2566 if (!rdev->desc->ops->set_mode) { 2567 ret = -EINVAL; 2568 goto out; 2569 } 2570 2571 /* return if the same mode is requested */ 2572 if (rdev->desc->ops->get_mode) { 2573 regulator_curr_mode = rdev->desc->ops->get_mode(rdev); 2574 if (regulator_curr_mode == mode) { 2575 ret = 0; 2576 goto out; 2577 } 2578 } 2579 2580 /* constraints check */ 2581 ret = regulator_mode_constrain(rdev, &mode); 2582 if (ret < 0) 2583 goto out; 2584 2585 ret = rdev->desc->ops->set_mode(rdev, mode); 2586out: 2587 mutex_unlock(&rdev->mutex); 2588 return ret; 2589} 2590EXPORT_SYMBOL_GPL(regulator_set_mode); 2591 2592static unsigned int _regulator_get_mode(struct regulator_dev *rdev) 2593{ 2594 int ret; 2595 2596 mutex_lock(&rdev->mutex); 2597 2598 /* sanity check */ 2599 if (!rdev->desc->ops->get_mode) { 2600 ret = -EINVAL; 2601 goto out; 2602 } 2603 2604 ret = rdev->desc->ops->get_mode(rdev); 2605out: 2606 mutex_unlock(&rdev->mutex); 2607 return ret; 2608} 2609 2610/** 2611 * regulator_get_mode - get regulator operating mode 2612 * @regulator: regulator source 2613 * 2614 * Get the current regulator operating mode. 2615 */ 2616unsigned int regulator_get_mode(struct regulator *regulator) 2617{ 2618 return _regulator_get_mode(regulator->rdev); 2619} 2620EXPORT_SYMBOL_GPL(regulator_get_mode); 2621 2622/** 2623 * regulator_set_optimum_mode - set regulator optimum operating mode 2624 * @regulator: regulator source 2625 * @uA_load: load current 2626 * 2627 * Notifies the regulator core of a new device load. This is then used by 2628 * DRMS (if enabled by constraints) to set the most efficient regulator 2629 * operating mode for the new regulator loading. 2630 * 2631 * Consumer devices notify their supply regulator of the maximum power 2632 * they will require (can be taken from device datasheet in the power 2633 * consumption tables) when they change operational status and hence power 2634 * state. Examples of operational state changes that can affect power 2635 * consumption are :- 2636 * 2637 * o Device is opened / closed. 2638 * o Device I/O is about to begin or has just finished. 2639 * o Device is idling in between work. 2640 * 2641 * This information is also exported via sysfs to userspace. 2642 * 2643 * DRMS will sum the total requested load on the regulator and change 2644 * to the most efficient operating mode if platform constraints allow. 2645 * 2646 * Returns the new regulator mode or error. 2647 */ 2648int regulator_set_optimum_mode(struct regulator *regulator, int uA_load) 2649{ 2650 struct regulator_dev *rdev = regulator->rdev; 2651 struct regulator *consumer; 2652 int ret, output_uV, input_uV = 0, total_uA_load = 0; 2653 unsigned int mode; 2654 2655 if (rdev->supply) 2656 input_uV = regulator_get_voltage(rdev->supply); 2657 2658 mutex_lock(&rdev->mutex); 2659 2660 /* 2661 * first check to see if we can set modes at all, otherwise just 2662 * tell the consumer everything is OK. 2663 */ 2664 regulator->uA_load = uA_load; 2665 ret = regulator_check_drms(rdev); 2666 if (ret < 0) { 2667 ret = 0; 2668 goto out; 2669 } 2670 2671 if (!rdev->desc->ops->get_optimum_mode) 2672 goto out; 2673 2674 /* 2675 * we can actually do this so any errors are indicators of 2676 * potential real failure. 2677 */ 2678 ret = -EINVAL; 2679 2680 if (!rdev->desc->ops->set_mode) 2681 goto out; 2682 2683 /* get output voltage */ 2684 output_uV = _regulator_get_voltage(rdev); 2685 if (output_uV <= 0) { 2686 rdev_err(rdev, "invalid output voltage found\n"); 2687 goto out; 2688 } 2689 2690 /* No supply? Use constraint voltage */ 2691 if (input_uV <= 0) 2692 input_uV = rdev->constraints->input_uV; 2693 if (input_uV <= 0) { 2694 rdev_err(rdev, "invalid input voltage found\n"); 2695 goto out; 2696 } 2697 2698 /* calc total requested load for this regulator */ 2699 list_for_each_entry(consumer, &rdev->consumer_list, list) 2700 total_uA_load += consumer->uA_load; 2701 2702 mode = rdev->desc->ops->get_optimum_mode(rdev, 2703 input_uV, output_uV, 2704 total_uA_load); 2705 ret = regulator_mode_constrain(rdev, &mode); 2706 if (ret < 0) { 2707 rdev_err(rdev, "failed to get optimum mode @ %d uA %d -> %d uV\n", 2708 total_uA_load, input_uV, output_uV); 2709 goto out; 2710 } 2711 2712 ret = rdev->desc->ops->set_mode(rdev, mode); 2713 if (ret < 0) { 2714 rdev_err(rdev, "failed to set optimum mode %x\n", mode); 2715 goto out; 2716 } 2717 ret = mode; 2718out: 2719 mutex_unlock(&rdev->mutex); 2720 return ret; 2721} 2722EXPORT_SYMBOL_GPL(regulator_set_optimum_mode); 2723 2724/** 2725 * regulator_set_bypass_regmap - Default set_bypass() using regmap 2726 * 2727 * @rdev: device to operate on. 2728 * @enable: state to set. 2729 */ 2730int regulator_set_bypass_regmap(struct regulator_dev *rdev, bool enable) 2731{ 2732 unsigned int val; 2733 2734 if (enable) 2735 val = rdev->desc->bypass_mask; 2736 else 2737 val = 0; 2738 2739 return regmap_update_bits(rdev->regmap, rdev->desc->bypass_reg, 2740 rdev->desc->bypass_mask, val); 2741} 2742EXPORT_SYMBOL_GPL(regulator_set_bypass_regmap); 2743 2744/** 2745 * regulator_get_bypass_regmap - Default get_bypass() using regmap 2746 * 2747 * @rdev: device to operate on. 2748 * @enable: current state. 2749 */ 2750int regulator_get_bypass_regmap(struct regulator_dev *rdev, bool *enable) 2751{ 2752 unsigned int val; 2753 int ret; 2754 2755 ret = regmap_read(rdev->regmap, rdev->desc->bypass_reg, &val); 2756 if (ret != 0) 2757 return ret; 2758 2759 *enable = val & rdev->desc->bypass_mask; 2760 2761 return 0; 2762} 2763EXPORT_SYMBOL_GPL(regulator_get_bypass_regmap); 2764 2765/** 2766 * regulator_allow_bypass - allow the regulator to go into bypass mode 2767 * 2768 * @regulator: Regulator to configure 2769 * @allow: enable or disable bypass mode 2770 * 2771 * Allow the regulator to go into bypass mode if all other consumers 2772 * for the regulator also enable bypass mode and the machine 2773 * constraints allow this. Bypass mode means that the regulator is 2774 * simply passing the input directly to the output with no regulation. 2775 */ 2776int regulator_allow_bypass(struct regulator *regulator, bool enable) 2777{ 2778 struct regulator_dev *rdev = regulator->rdev; 2779 int ret = 0; 2780 2781 if (!rdev->desc->ops->set_bypass) 2782 return 0; 2783 2784 if (rdev->constraints && 2785 !(rdev->constraints->valid_ops_mask & REGULATOR_CHANGE_BYPASS)) 2786 return 0; 2787 2788 mutex_lock(&rdev->mutex); 2789 2790 if (enable && !regulator->bypass) { 2791 rdev->bypass_count++; 2792 2793 if (rdev->bypass_count == rdev->open_count) { 2794 ret = rdev->desc->ops->set_bypass(rdev, enable); 2795 if (ret != 0) 2796 rdev->bypass_count--; 2797 } 2798 2799 } else if (!enable && regulator->bypass) { 2800 rdev->bypass_count--; 2801 2802 if (rdev->bypass_count != rdev->open_count) { 2803 ret = rdev->desc->ops->set_bypass(rdev, enable); 2804 if (ret != 0) 2805 rdev->bypass_count++; 2806 } 2807 } 2808 2809 if (ret == 0) 2810 regulator->bypass = enable; 2811 2812 mutex_unlock(&rdev->mutex); 2813 2814 return ret; 2815} 2816EXPORT_SYMBOL_GPL(regulator_allow_bypass); 2817 2818/** 2819 * regulator_register_notifier - register regulator event notifier 2820 * @regulator: regulator source 2821 * @nb: notifier block 2822 * 2823 * Register notifier block to receive regulator events. 2824 */ 2825int regulator_register_notifier(struct regulator *regulator, 2826 struct notifier_block *nb) 2827{ 2828 return blocking_notifier_chain_register(®ulator->rdev->notifier, 2829 nb); 2830} 2831EXPORT_SYMBOL_GPL(regulator_register_notifier); 2832 2833/** 2834 * regulator_unregister_notifier - unregister regulator event notifier 2835 * @regulator: regulator source 2836 * @nb: notifier block 2837 * 2838 * Unregister regulator event notifier block. 2839 */ 2840int regulator_unregister_notifier(struct regulator *regulator, 2841 struct notifier_block *nb) 2842{ 2843 return blocking_notifier_chain_unregister(®ulator->rdev->notifier, 2844 nb); 2845} 2846EXPORT_SYMBOL_GPL(regulator_unregister_notifier); 2847 2848/* notify regulator consumers and downstream regulator consumers. 2849 * Note mutex must be held by caller. 2850 */ 2851static void _notifier_call_chain(struct regulator_dev *rdev, 2852 unsigned long event, void *data) 2853{ 2854 /* call rdev chain first */ 2855 blocking_notifier_call_chain(&rdev->notifier, event, data); 2856} 2857 2858/** 2859 * regulator_bulk_get - get multiple regulator consumers 2860 * 2861 * @dev: Device to supply 2862 * @num_consumers: Number of consumers to register 2863 * @consumers: Configuration of consumers; clients are stored here. 2864 * 2865 * @return 0 on success, an errno on failure. 2866 * 2867 * This helper function allows drivers to get several regulator 2868 * consumers in one operation. If any of the regulators cannot be 2869 * acquired then any regulators that were allocated will be freed 2870 * before returning to the caller. 2871 */ 2872int regulator_bulk_get(struct device *dev, int num_consumers, 2873 struct regulator_bulk_data *consumers) 2874{ 2875 int i; 2876 int ret; 2877 2878 for (i = 0; i < num_consumers; i++) 2879 consumers[i].consumer = NULL; 2880 2881 for (i = 0; i < num_consumers; i++) { 2882 consumers[i].consumer = regulator_get(dev, 2883 consumers[i].supply); 2884 if (IS_ERR(consumers[i].consumer)) { 2885 ret = PTR_ERR(consumers[i].consumer); 2886 dev_err(dev, "Failed to get supply '%s': %d\n", 2887 consumers[i].supply, ret); 2888 consumers[i].consumer = NULL; 2889 goto err; 2890 } 2891 } 2892 2893 return 0; 2894 2895err: 2896 while (--i >= 0) 2897 regulator_put(consumers[i].consumer); 2898 2899 return ret; 2900} 2901EXPORT_SYMBOL_GPL(regulator_bulk_get); 2902 2903/** 2904 * devm_regulator_bulk_get - managed get multiple regulator consumers 2905 * 2906 * @dev: Device to supply 2907 * @num_consumers: Number of consumers to register 2908 * @consumers: Configuration of consumers; clients are stored here. 2909 * 2910 * @return 0 on success, an errno on failure. 2911 * 2912 * This helper function allows drivers to get several regulator 2913 * consumers in one operation with management, the regulators will 2914 * automatically be freed when the device is unbound. If any of the 2915 * regulators cannot be acquired then any regulators that were 2916 * allocated will be freed before returning to the caller. 2917 */ 2918int devm_regulator_bulk_get(struct device *dev, int num_consumers, 2919 struct regulator_bulk_data *consumers) 2920{ 2921 int i; 2922 int ret; 2923 2924 for (i = 0; i < num_consumers; i++) 2925 consumers[i].consumer = NULL; 2926 2927 for (i = 0; i < num_consumers; i++) { 2928 consumers[i].consumer = devm_regulator_get(dev, 2929 consumers[i].supply); 2930 if (IS_ERR(consumers[i].consumer)) { 2931 ret = PTR_ERR(consumers[i].consumer); 2932 dev_err(dev, "Failed to get supply '%s': %d\n", 2933 consumers[i].supply, ret); 2934 consumers[i].consumer = NULL; 2935 goto err; 2936 } 2937 } 2938 2939 return 0; 2940 2941err: 2942 for (i = 0; i < num_consumers && consumers[i].consumer; i++) 2943 devm_regulator_put(consumers[i].consumer); 2944 2945 return ret; 2946} 2947EXPORT_SYMBOL_GPL(devm_regulator_bulk_get); 2948 2949static void regulator_bulk_enable_async(void *data, async_cookie_t cookie) 2950{ 2951 struct regulator_bulk_data *bulk = data; 2952 2953 bulk->ret = regulator_enable(bulk->consumer); 2954} 2955 2956/** 2957 * regulator_bulk_enable - enable multiple regulator consumers 2958 * 2959 * @num_consumers: Number of consumers 2960 * @consumers: Consumer data; clients are stored here. 2961 * @return 0 on success, an errno on failure 2962 * 2963 * This convenience API allows consumers to enable multiple regulator 2964 * clients in a single API call. If any consumers cannot be enabled 2965 * then any others that were enabled will be disabled again prior to 2966 * return. 2967 */ 2968int regulator_bulk_enable(int num_consumers, 2969 struct regulator_bulk_data *consumers) 2970{ 2971 ASYNC_DOMAIN_EXCLUSIVE(async_domain); 2972 int i; 2973 int ret = 0; 2974 2975 for (i = 0; i < num_consumers; i++) { 2976 if (consumers[i].consumer->always_on) 2977 consumers[i].ret = 0; 2978 else 2979 async_schedule_domain(regulator_bulk_enable_async, 2980 &consumers[i], &async_domain); 2981 } 2982 2983 async_synchronize_full_domain(&async_domain); 2984 2985 /* If any consumer failed we need to unwind any that succeeded */ 2986 for (i = 0; i < num_consumers; i++) { 2987 if (consumers[i].ret != 0) { 2988 ret = consumers[i].ret; 2989 goto err; 2990 } 2991 } 2992 2993 return 0; 2994 2995err: 2996 pr_err("Failed to enable %s: %d\n", consumers[i].supply, ret); 2997 while (--i >= 0) 2998 regulator_disable(consumers[i].consumer); 2999 3000 return ret; 3001} 3002EXPORT_SYMBOL_GPL(regulator_bulk_enable); 3003 3004/** 3005 * regulator_bulk_disable - disable multiple regulator consumers 3006 * 3007 * @num_consumers: Number of consumers 3008 * @consumers: Consumer data; clients are stored here. 3009 * @return 0 on success, an errno on failure 3010 * 3011 * This convenience API allows consumers to disable multiple regulator 3012 * clients in a single API call. If any consumers cannot be disabled 3013 * then any others that were disabled will be enabled again prior to 3014 * return. 3015 */ 3016int regulator_bulk_disable(int num_consumers, 3017 struct regulator_bulk_data *consumers) 3018{ 3019 int i; 3020 int ret, r; 3021 3022 for (i = num_consumers - 1; i >= 0; --i) { 3023 ret = regulator_disable(consumers[i].consumer); 3024 if (ret != 0) 3025 goto err; 3026 } 3027 3028 return 0; 3029 3030err: 3031 pr_err("Failed to disable %s: %d\n", consumers[i].supply, ret); 3032 for (++i; i < num_consumers; ++i) { 3033 r = regulator_enable(consumers[i].consumer); 3034 if (r != 0) 3035 pr_err("Failed to reename %s: %d\n", 3036 consumers[i].supply, r); 3037 } 3038 3039 return ret; 3040} 3041EXPORT_SYMBOL_GPL(regulator_bulk_disable); 3042 3043/** 3044 * regulator_bulk_force_disable - force disable multiple regulator consumers 3045 * 3046 * @num_consumers: Number of consumers 3047 * @consumers: Consumer data; clients are stored here. 3048 * @return 0 on success, an errno on failure 3049 * 3050 * This convenience API allows consumers to forcibly disable multiple regulator 3051 * clients in a single API call. 3052 * NOTE: This should be used for situations when device damage will 3053 * likely occur if the regulators are not disabled (e.g. over temp). 3054 * Although regulator_force_disable function call for some consumers can 3055 * return error numbers, the function is called for all consumers. 3056 */ 3057int regulator_bulk_force_disable(int num_consumers, 3058 struct regulator_bulk_data *consumers) 3059{ 3060 int i; 3061 int ret; 3062 3063 for (i = 0; i < num_consumers; i++) 3064 consumers[i].ret = 3065 regulator_force_disable(consumers[i].consumer); 3066 3067 for (i = 0; i < num_consumers; i++) { 3068 if (consumers[i].ret != 0) { 3069 ret = consumers[i].ret; 3070 goto out; 3071 } 3072 } 3073 3074 return 0; 3075out: 3076 return ret; 3077} 3078EXPORT_SYMBOL_GPL(regulator_bulk_force_disable); 3079 3080/** 3081 * regulator_bulk_free - free multiple regulator consumers 3082 * 3083 * @num_consumers: Number of consumers 3084 * @consumers: Consumer data; clients are stored here. 3085 * 3086 * This convenience API allows consumers to free multiple regulator 3087 * clients in a single API call. 3088 */ 3089void regulator_bulk_free(int num_consumers, 3090 struct regulator_bulk_data *consumers) 3091{ 3092 int i; 3093 3094 for (i = 0; i < num_consumers; i++) { 3095 regulator_put(consumers[i].consumer); 3096 consumers[i].consumer = NULL; 3097 } 3098} 3099EXPORT_SYMBOL_GPL(regulator_bulk_free); 3100 3101/** 3102 * regulator_notifier_call_chain - call regulator event notifier 3103 * @rdev: regulator source 3104 * @event: notifier block 3105 * @data: callback-specific data. 3106 * 3107 * Called by regulator drivers to notify clients a regulator event has 3108 * occurred. We also notify regulator clients downstream. 3109 * Note lock must be held by caller. 3110 */ 3111int regulator_notifier_call_chain(struct regulator_dev *rdev, 3112 unsigned long event, void *data) 3113{ 3114 _notifier_call_chain(rdev, event, data); 3115 return NOTIFY_DONE; 3116 3117} 3118EXPORT_SYMBOL_GPL(regulator_notifier_call_chain); 3119 3120/** 3121 * regulator_mode_to_status - convert a regulator mode into a status 3122 * 3123 * @mode: Mode to convert 3124 * 3125 * Convert a regulator mode into a status. 3126 */ 3127int regulator_mode_to_status(unsigned int mode) 3128{ 3129 switch (mode) { 3130 case REGULATOR_MODE_FAST: 3131 return REGULATOR_STATUS_FAST; 3132 case REGULATOR_MODE_NORMAL: 3133 return REGULATOR_STATUS_NORMAL; 3134 case REGULATOR_MODE_IDLE: 3135 return REGULATOR_STATUS_IDLE; 3136 case REGULATOR_MODE_STANDBY: 3137 return REGULATOR_STATUS_STANDBY; 3138 default: 3139 return REGULATOR_STATUS_UNDEFINED; 3140 } 3141} 3142EXPORT_SYMBOL_GPL(regulator_mode_to_status); 3143 3144/* 3145 * To avoid cluttering sysfs (and memory) with useless state, only 3146 * create attributes that can be meaningfully displayed. 3147 */ 3148static int add_regulator_attributes(struct regulator_dev *rdev) 3149{ 3150 struct device *dev = &rdev->dev; 3151 struct regulator_ops *ops = rdev->desc->ops; 3152 int status = 0; 3153 3154 /* some attributes need specific methods to be displayed */ 3155 if ((ops->get_voltage && ops->get_voltage(rdev) >= 0) || 3156 (ops->get_voltage_sel && ops->get_voltage_sel(rdev) >= 0) || 3157 (ops->list_voltage && ops->list_voltage(rdev, 0) >= 0)) { 3158 status = device_create_file(dev, &dev_attr_microvolts); 3159 if (status < 0) 3160 return status; 3161 } 3162 if (ops->get_current_limit) { 3163 status = device_create_file(dev, &dev_attr_microamps); 3164 if (status < 0) 3165 return status; 3166 } 3167 if (ops->get_mode) { 3168 status = device_create_file(dev, &dev_attr_opmode); 3169 if (status < 0) 3170 return status; 3171 } 3172 if (ops->is_enabled) { 3173 status = device_create_file(dev, &dev_attr_state); 3174 if (status < 0) 3175 return status; 3176 } 3177 if (ops->get_status) { 3178 status = device_create_file(dev, &dev_attr_status); 3179 if (status < 0) 3180 return status; 3181 } 3182 if (ops->get_bypass) { 3183 status = device_create_file(dev, &dev_attr_bypass); 3184 if (status < 0) 3185 return status; 3186 } 3187 3188 /* some attributes are type-specific */ 3189 if (rdev->desc->type == REGULATOR_CURRENT) { 3190 status = device_create_file(dev, &dev_attr_requested_microamps); 3191 if (status < 0) 3192 return status; 3193 } 3194 3195 /* all the other attributes exist to support constraints; 3196 * don't show them if there are no constraints, or if the 3197 * relevant supporting methods are missing. 3198 */ 3199 if (!rdev->constraints) 3200 return status; 3201 3202 /* constraints need specific supporting methods */ 3203 if (ops->set_voltage || ops->set_voltage_sel) { 3204 status = device_create_file(dev, &dev_attr_min_microvolts); 3205 if (status < 0) 3206 return status; 3207 status = device_create_file(dev, &dev_attr_max_microvolts); 3208 if (status < 0) 3209 return status; 3210 } 3211 if (ops->set_current_limit) { 3212 status = device_create_file(dev, &dev_attr_min_microamps); 3213 if (status < 0) 3214 return status; 3215 status = device_create_file(dev, &dev_attr_max_microamps); 3216 if (status < 0) 3217 return status; 3218 } 3219 3220 status = device_create_file(dev, &dev_attr_suspend_standby_state); 3221 if (status < 0) 3222 return status; 3223 status = device_create_file(dev, &dev_attr_suspend_mem_state); 3224 if (status < 0) 3225 return status; 3226 status = device_create_file(dev, &dev_attr_suspend_disk_state); 3227 if (status < 0) 3228 return status; 3229 3230 if (ops->set_suspend_voltage) { 3231 status = device_create_file(dev, 3232 &dev_attr_suspend_standby_microvolts); 3233 if (status < 0) 3234 return status; 3235 status = device_create_file(dev, 3236 &dev_attr_suspend_mem_microvolts); 3237 if (status < 0) 3238 return status; 3239 status = device_create_file(dev, 3240 &dev_attr_suspend_disk_microvolts); 3241 if (status < 0) 3242 return status; 3243 } 3244 3245 if (ops->set_suspend_mode) { 3246 status = device_create_file(dev, 3247 &dev_attr_suspend_standby_mode); 3248 if (status < 0) 3249 return status; 3250 status = device_create_file(dev, 3251 &dev_attr_suspend_mem_mode); 3252 if (status < 0) 3253 return status; 3254 status = device_create_file(dev, 3255 &dev_attr_suspend_disk_mode); 3256 if (status < 0) 3257 return status; 3258 } 3259 3260 return status; 3261} 3262 3263static void rdev_init_debugfs(struct regulator_dev *rdev) 3264{ 3265 rdev->debugfs = debugfs_create_dir(rdev_get_name(rdev), debugfs_root); 3266 if (!rdev->debugfs) { 3267 rdev_warn(rdev, "Failed to create debugfs directory\n"); 3268 return; 3269 } 3270 3271 debugfs_create_u32("use_count", 0444, rdev->debugfs, 3272 &rdev->use_count); 3273 debugfs_create_u32("open_count", 0444, rdev->debugfs, 3274 &rdev->open_count); 3275 debugfs_create_u32("bypass_count", 0444, rdev->debugfs, 3276 &rdev->bypass_count); 3277} 3278 3279/** 3280 * regulator_register - register regulator 3281 * @regulator_desc: regulator to register 3282 * @config: runtime configuration for regulator 3283 * 3284 * Called by regulator drivers to register a regulator. 3285 * Returns 0 on success. 3286 */ 3287struct regulator_dev * 3288regulator_register(const struct regulator_desc *regulator_desc, 3289 const struct regulator_config *config) 3290{ 3291 const struct regulation_constraints *constraints = NULL; 3292 const struct regulator_init_data *init_data; 3293 static atomic_t regulator_no = ATOMIC_INIT(0); 3294 struct regulator_dev *rdev; 3295 struct device *dev; 3296 int ret, i; 3297 const char *supply = NULL; 3298 3299 if (regulator_desc == NULL || config == NULL) 3300 return ERR_PTR(-EINVAL); 3301 3302 dev = config->dev; 3303 WARN_ON(!dev); 3304 3305 if (regulator_desc->name == NULL || regulator_desc->ops == NULL) 3306 return ERR_PTR(-EINVAL); 3307 3308 if (regulator_desc->type != REGULATOR_VOLTAGE && 3309 regulator_desc->type != REGULATOR_CURRENT) 3310 return ERR_PTR(-EINVAL); 3311 3312 /* Only one of each should be implemented */ 3313 WARN_ON(regulator_desc->ops->get_voltage && 3314 regulator_desc->ops->get_voltage_sel); 3315 WARN_ON(regulator_desc->ops->set_voltage && 3316 regulator_desc->ops->set_voltage_sel); 3317 3318 /* If we're using selectors we must implement list_voltage. */ 3319 if (regulator_desc->ops->get_voltage_sel && 3320 !regulator_desc->ops->list_voltage) { 3321 return ERR_PTR(-EINVAL); 3322 } 3323 if (regulator_desc->ops->set_voltage_sel && 3324 !regulator_desc->ops->list_voltage) { 3325 return ERR_PTR(-EINVAL); 3326 } 3327 3328 init_data = config->init_data; 3329 3330 rdev = kzalloc(sizeof(struct regulator_dev), GFP_KERNEL); 3331 if (rdev == NULL) 3332 return ERR_PTR(-ENOMEM); 3333 3334 mutex_lock(®ulator_list_mutex); 3335 3336 mutex_init(&rdev->mutex); 3337 rdev->reg_data = config->driver_data; 3338 rdev->owner = regulator_desc->owner; 3339 rdev->desc = regulator_desc; 3340 if (config->regmap) 3341 rdev->regmap = config->regmap; 3342 else if (dev_get_regmap(dev, NULL)) 3343 rdev->regmap = dev_get_regmap(dev, NULL); 3344 else if (dev->parent) 3345 rdev->regmap = dev_get_regmap(dev->parent, NULL); 3346 INIT_LIST_HEAD(&rdev->consumer_list); 3347 INIT_LIST_HEAD(&rdev->list); 3348 BLOCKING_INIT_NOTIFIER_HEAD(&rdev->notifier); 3349 INIT_DELAYED_WORK(&rdev->disable_work, regulator_disable_work); 3350 3351 /* preform any regulator specific init */ 3352 if (init_data && init_data->regulator_init) { 3353 ret = init_data->regulator_init(rdev->reg_data); 3354 if (ret < 0) 3355 goto clean; 3356 } 3357 3358 /* register with sysfs */ 3359 rdev->dev.class = ®ulator_class; 3360 rdev->dev.of_node = config->of_node; 3361 rdev->dev.parent = dev; 3362 dev_set_name(&rdev->dev, "regulator.%d", 3363 atomic_inc_return(®ulator_no) - 1); 3364 ret = device_register(&rdev->dev); 3365 if (ret != 0) { 3366 put_device(&rdev->dev); 3367 goto clean; 3368 } 3369 3370 dev_set_drvdata(&rdev->dev, rdev); 3371 3372 if (config->ena_gpio && gpio_is_valid(config->ena_gpio)) { 3373 ret = gpio_request_one(config->ena_gpio, 3374 GPIOF_DIR_OUT | config->ena_gpio_flags, 3375 rdev_get_name(rdev)); 3376 if (ret != 0) { 3377 rdev_err(rdev, "Failed to request enable GPIO%d: %d\n", 3378 config->ena_gpio, ret); 3379 goto wash; 3380 } 3381 3382 rdev->ena_gpio = config->ena_gpio; 3383 rdev->ena_gpio_invert = config->ena_gpio_invert; 3384 3385 if (config->ena_gpio_flags & GPIOF_OUT_INIT_HIGH) 3386 rdev->ena_gpio_state = 1; 3387 3388 if (rdev->ena_gpio_invert) 3389 rdev->ena_gpio_state = !rdev->ena_gpio_state; 3390 } 3391 3392 /* set regulator constraints */ 3393 if (init_data) 3394 constraints = &init_data->constraints; 3395 3396 ret = set_machine_constraints(rdev, constraints); 3397 if (ret < 0) 3398 goto scrub; 3399 3400 /* add attributes supported by this regulator */ 3401 ret = add_regulator_attributes(rdev); 3402 if (ret < 0) 3403 goto scrub; 3404 3405 if (init_data && init_data->supply_regulator) 3406 supply = init_data->supply_regulator; 3407 else if (regulator_desc->supply_name) 3408 supply = regulator_desc->supply_name; 3409 3410 if (supply) { 3411 struct regulator_dev *r; 3412 3413 r = regulator_dev_lookup(dev, supply, &ret); 3414 3415 if (!r) { 3416 dev_err(dev, "Failed to find supply %s\n", supply); 3417 ret = -EPROBE_DEFER; 3418 goto scrub; 3419 } 3420 3421 ret = set_supply(rdev, r); 3422 if (ret < 0) 3423 goto scrub; 3424 3425 /* Enable supply if rail is enabled */ 3426 if (_regulator_is_enabled(rdev)) { 3427 ret = regulator_enable(rdev->supply); 3428 if (ret < 0) 3429 goto scrub; 3430 } 3431 } 3432 3433 /* add consumers devices */ 3434 if (init_data) { 3435 for (i = 0; i < init_data->num_consumer_supplies; i++) { 3436 ret = set_consumer_device_supply(rdev, 3437 init_data->consumer_supplies[i].dev_name, 3438 init_data->consumer_supplies[i].supply); 3439 if (ret < 0) { 3440 dev_err(dev, "Failed to set supply %s\n", 3441 init_data->consumer_supplies[i].supply); 3442 goto unset_supplies; 3443 } 3444 } 3445 } 3446 3447 list_add(&rdev->list, ®ulator_list); 3448 3449 rdev_init_debugfs(rdev); 3450out: 3451 mutex_unlock(®ulator_list_mutex); 3452 return rdev; 3453 3454unset_supplies: 3455 unset_regulator_supplies(rdev); 3456 3457scrub: 3458 if (rdev->supply) 3459 _regulator_put(rdev->supply); 3460 if (rdev->ena_gpio) 3461 gpio_free(rdev->ena_gpio); 3462 kfree(rdev->constraints); 3463wash: 3464 device_unregister(&rdev->dev); 3465 /* device core frees rdev */ 3466 rdev = ERR_PTR(ret); 3467 goto out; 3468 3469clean: 3470 kfree(rdev); 3471 rdev = ERR_PTR(ret); 3472 goto out; 3473} 3474EXPORT_SYMBOL_GPL(regulator_register); 3475 3476/** 3477 * regulator_unregister - unregister regulator 3478 * @rdev: regulator to unregister 3479 * 3480 * Called by regulator drivers to unregister a regulator. 3481 */ 3482void regulator_unregister(struct regulator_dev *rdev) 3483{ 3484 if (rdev == NULL) 3485 return; 3486 3487 if (rdev->supply) 3488 regulator_put(rdev->supply); 3489 mutex_lock(®ulator_list_mutex); 3490 debugfs_remove_recursive(rdev->debugfs); 3491 flush_work(&rdev->disable_work.work); 3492 WARN_ON(rdev->open_count); 3493 unset_regulator_supplies(rdev); 3494 list_del(&rdev->list); 3495 kfree(rdev->constraints); 3496 if (rdev->ena_gpio) 3497 gpio_free(rdev->ena_gpio); 3498 device_unregister(&rdev->dev); 3499 mutex_unlock(®ulator_list_mutex); 3500} 3501EXPORT_SYMBOL_GPL(regulator_unregister); 3502 3503/** 3504 * regulator_suspend_prepare - prepare regulators for system wide suspend 3505 * @state: system suspend state 3506 * 3507 * Configure each regulator with it's suspend operating parameters for state. 3508 * This will usually be called by machine suspend code prior to supending. 3509 */ 3510int regulator_suspend_prepare(suspend_state_t state) 3511{ 3512 struct regulator_dev *rdev; 3513 int ret = 0; 3514 3515 /* ON is handled by regulator active state */ 3516 if (state == PM_SUSPEND_ON) 3517 return -EINVAL; 3518 3519 mutex_lock(®ulator_list_mutex); 3520 list_for_each_entry(rdev, ®ulator_list, list) { 3521 3522 mutex_lock(&rdev->mutex); 3523 ret = suspend_prepare(rdev, state); 3524 mutex_unlock(&rdev->mutex); 3525 3526 if (ret < 0) { 3527 rdev_err(rdev, "failed to prepare\n"); 3528 goto out; 3529 } 3530 } 3531out: 3532 mutex_unlock(®ulator_list_mutex); 3533 return ret; 3534} 3535EXPORT_SYMBOL_GPL(regulator_suspend_prepare); 3536 3537/** 3538 * regulator_suspend_finish - resume regulators from system wide suspend 3539 * 3540 * Turn on regulators that might be turned off by regulator_suspend_prepare 3541 * and that should be turned on according to the regulators properties. 3542 */ 3543int regulator_suspend_finish(void) 3544{ 3545 struct regulator_dev *rdev; 3546 int ret = 0, error; 3547 3548 mutex_lock(®ulator_list_mutex); 3549 list_for_each_entry(rdev, ®ulator_list, list) { 3550 struct regulator_ops *ops = rdev->desc->ops; 3551 3552 mutex_lock(&rdev->mutex); 3553 if ((rdev->use_count > 0 || rdev->constraints->always_on) && 3554 ops->enable) { 3555 error = ops->enable(rdev); 3556 if (error) 3557 ret = error; 3558 } else { 3559 if (!has_full_constraints) 3560 goto unlock; 3561 if (!ops->disable) 3562 goto unlock; 3563 if (!_regulator_is_enabled(rdev)) 3564 goto unlock; 3565 3566 error = ops->disable(rdev); 3567 if (error) 3568 ret = error; 3569 } 3570unlock: 3571 mutex_unlock(&rdev->mutex); 3572 } 3573 mutex_unlock(®ulator_list_mutex); 3574 return ret; 3575} 3576EXPORT_SYMBOL_GPL(regulator_suspend_finish); 3577 3578/** 3579 * regulator_has_full_constraints - the system has fully specified constraints 3580 * 3581 * Calling this function will cause the regulator API to disable all 3582 * regulators which have a zero use count and don't have an always_on 3583 * constraint in a late_initcall. 3584 * 3585 * The intention is that this will become the default behaviour in a 3586 * future kernel release so users are encouraged to use this facility 3587 * now. 3588 */ 3589void regulator_has_full_constraints(void) 3590{ 3591 has_full_constraints = 1; 3592} 3593EXPORT_SYMBOL_GPL(regulator_has_full_constraints); 3594 3595/** 3596 * regulator_use_dummy_regulator - Provide a dummy regulator when none is found 3597 * 3598 * Calling this function will cause the regulator API to provide a 3599 * dummy regulator to consumers if no physical regulator is found, 3600 * allowing most consumers to proceed as though a regulator were 3601 * configured. This allows systems such as those with software 3602 * controllable regulators for the CPU core only to be brought up more 3603 * readily. 3604 */ 3605void regulator_use_dummy_regulator(void) 3606{ 3607 board_wants_dummy_regulator = true; 3608} 3609EXPORT_SYMBOL_GPL(regulator_use_dummy_regulator); 3610 3611/** 3612 * rdev_get_drvdata - get rdev regulator driver data 3613 * @rdev: regulator 3614 * 3615 * Get rdev regulator driver private data. This call can be used in the 3616 * regulator driver context. 3617 */ 3618void *rdev_get_drvdata(struct regulator_dev *rdev) 3619{ 3620 return rdev->reg_data; 3621} 3622EXPORT_SYMBOL_GPL(rdev_get_drvdata); 3623 3624/** 3625 * regulator_get_drvdata - get regulator driver data 3626 * @regulator: regulator 3627 * 3628 * Get regulator driver private data. This call can be used in the consumer 3629 * driver context when non API regulator specific functions need to be called. 3630 */ 3631void *regulator_get_drvdata(struct regulator *regulator) 3632{ 3633 return regulator->rdev->reg_data; 3634} 3635EXPORT_SYMBOL_GPL(regulator_get_drvdata); 3636 3637/** 3638 * regulator_set_drvdata - set regulator driver data 3639 * @regulator: regulator 3640 * @data: data 3641 */ 3642void regulator_set_drvdata(struct regulator *regulator, void *data) 3643{ 3644 regulator->rdev->reg_data = data; 3645} 3646EXPORT_SYMBOL_GPL(regulator_set_drvdata); 3647 3648/** 3649 * regulator_get_id - get regulator ID 3650 * @rdev: regulator 3651 */ 3652int rdev_get_id(struct regulator_dev *rdev) 3653{ 3654 return rdev->desc->id; 3655} 3656EXPORT_SYMBOL_GPL(rdev_get_id); 3657 3658struct device *rdev_get_dev(struct regulator_dev *rdev) 3659{ 3660 return &rdev->dev; 3661} 3662EXPORT_SYMBOL_GPL(rdev_get_dev); 3663 3664void *regulator_get_init_drvdata(struct regulator_init_data *reg_init_data) 3665{ 3666 return reg_init_data->driver_data; 3667} 3668EXPORT_SYMBOL_GPL(regulator_get_init_drvdata); 3669 3670#ifdef CONFIG_DEBUG_FS 3671static ssize_t supply_map_read_file(struct file *file, char __user *user_buf, 3672 size_t count, loff_t *ppos) 3673{ 3674 char *buf = kmalloc(PAGE_SIZE, GFP_KERNEL); 3675 ssize_t len, ret = 0; 3676 struct regulator_map *map; 3677 3678 if (!buf) 3679 return -ENOMEM; 3680 3681 list_for_each_entry(map, ®ulator_map_list, list) { 3682 len = snprintf(buf + ret, PAGE_SIZE - ret, 3683 "%s -> %s.%s\n", 3684 rdev_get_name(map->regulator), map->dev_name, 3685 map->supply); 3686 if (len >= 0) 3687 ret += len; 3688 if (ret > PAGE_SIZE) { 3689 ret = PAGE_SIZE; 3690 break; 3691 } 3692 } 3693 3694 ret = simple_read_from_buffer(user_buf, count, ppos, buf, ret); 3695 3696 kfree(buf); 3697 3698 return ret; 3699} 3700#endif 3701 3702static const struct file_operations supply_map_fops = { 3703#ifdef CONFIG_DEBUG_FS 3704 .read = supply_map_read_file, 3705 .llseek = default_llseek, 3706#endif 3707}; 3708 3709static int __init regulator_init(void) 3710{ 3711 int ret; 3712 3713 ret = class_register(®ulator_class); 3714 3715 debugfs_root = debugfs_create_dir("regulator", NULL); 3716 if (!debugfs_root) 3717 pr_warn("regulator: Failed to create debugfs directory\n"); 3718 3719 debugfs_create_file("supply_map", 0444, debugfs_root, NULL, 3720 &supply_map_fops); 3721 3722 regulator_dummy_init(); 3723 3724 return ret; 3725} 3726 3727/* init early to allow our consumers to complete system booting */ 3728core_initcall(regulator_init); 3729 3730static int __init regulator_init_complete(void) 3731{ 3732 struct regulator_dev *rdev; 3733 struct regulator_ops *ops; 3734 struct regulation_constraints *c; 3735 int enabled, ret; 3736 3737 /* 3738 * Since DT doesn't provide an idiomatic mechanism for 3739 * enabling full constraints and since it's much more natural 3740 * with DT to provide them just assume that a DT enabled 3741 * system has full constraints. 3742 */ 3743 if (of_have_populated_dt()) 3744 has_full_constraints = true; 3745 3746 mutex_lock(®ulator_list_mutex); 3747 3748 /* If we have a full configuration then disable any regulators 3749 * which are not in use or always_on. This will become the 3750 * default behaviour in the future. 3751 */ 3752 list_for_each_entry(rdev, ®ulator_list, list) { 3753 ops = rdev->desc->ops; 3754 c = rdev->constraints; 3755 3756 if (!ops->disable || (c && c->always_on)) 3757 continue; 3758 3759 mutex_lock(&rdev->mutex); 3760 3761 if (rdev->use_count) 3762 goto unlock; 3763 3764 /* If we can't read the status assume it's on. */ 3765 if (ops->is_enabled) 3766 enabled = ops->is_enabled(rdev); 3767 else 3768 enabled = 1; 3769 3770 if (!enabled) 3771 goto unlock; 3772 3773 if (has_full_constraints) { 3774 /* We log since this may kill the system if it 3775 * goes wrong. */ 3776 rdev_info(rdev, "disabling\n"); 3777 ret = ops->disable(rdev); 3778 if (ret != 0) { 3779 rdev_err(rdev, "couldn't disable: %d\n", ret); 3780 } 3781 } else { 3782 /* The intention is that in future we will 3783 * assume that full constraints are provided 3784 * so warn even if we aren't going to do 3785 * anything here. 3786 */ 3787 rdev_warn(rdev, "incomplete constraints, leaving on\n"); 3788 } 3789 3790unlock: 3791 mutex_unlock(&rdev->mutex); 3792 } 3793 3794 mutex_unlock(®ulator_list_mutex); 3795 3796 return 0; 3797} 3798late_initcall(regulator_init_complete); 3799