nsp32.c revision 25729a7fb88ef2912fcb869abe3a76b3be07fc06
1/* 2 * NinjaSCSI-32Bi Cardbus, NinjaSCSI-32UDE PCI/CardBus SCSI driver 3 * Copyright (C) 2001, 2002, 2003 4 * YOKOTA Hiroshi <yokota@netlab.is.tsukuba.ac.jp> 5 * GOTO Masanori <gotom@debian.or.jp>, <gotom@debian.org> 6 * 7 * This program is free software; you can redistribute it and/or modify 8 * it under the terms of the GNU General Public License as published by 9 * the Free Software Foundation; either version 2, or (at your option) 10 * any later version. 11 * 12 * This program is distributed in the hope that it will be useful, 13 * but WITHOUT ANY WARRANTY; without even the implied warranty of 14 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 15 * GNU General Public License for more details. 16 * 17 * 18 * Revision History: 19 * 1.0: Initial Release. 20 * 1.1: Add /proc SDTR status. 21 * Remove obsolete error handler nsp32_reset. 22 * Some clean up. 23 * 1.2: PowerPC (big endian) support. 24 */ 25 26#include <linux/module.h> 27#include <linux/init.h> 28#include <linux/kernel.h> 29#include <linux/slab.h> 30#include <linux/string.h> 31#include <linux/timer.h> 32#include <linux/ioport.h> 33#include <linux/major.h> 34#include <linux/blkdev.h> 35#include <linux/interrupt.h> 36#include <linux/pci.h> 37#include <linux/delay.h> 38#include <linux/ctype.h> 39#include <linux/dma-mapping.h> 40 41#include <asm/dma.h> 42#include <asm/system.h> 43#include <asm/io.h> 44 45#include <scsi/scsi.h> 46#include <scsi/scsi_cmnd.h> 47#include <scsi/scsi_device.h> 48#include <scsi/scsi_host.h> 49#include <scsi/scsi_ioctl.h> 50 51#include "nsp32.h" 52 53 54/*********************************************************************** 55 * Module parameters 56 */ 57static int trans_mode = 0; /* default: BIOS */ 58module_param (trans_mode, int, 0); 59MODULE_PARM_DESC(trans_mode, "transfer mode (0: BIOS(default) 1: Async 2: Ultra20M"); 60#define ASYNC_MODE 1 61#define ULTRA20M_MODE 2 62 63static int auto_param = 0; /* default: ON */ 64module_param (auto_param, bool, 0); 65MODULE_PARM_DESC(auto_param, "AutoParameter mode (0: ON(default) 1: OFF)"); 66 67static int disc_priv = 1; /* default: OFF */ 68module_param (disc_priv, bool, 0); 69MODULE_PARM_DESC(disc_priv, "disconnection privilege mode (0: ON 1: OFF(default))"); 70 71MODULE_AUTHOR("YOKOTA Hiroshi <yokota@netlab.is.tsukuba.ac.jp>, GOTO Masanori <gotom@debian.or.jp>"); 72MODULE_DESCRIPTION("Workbit NinjaSCSI-32Bi/UDE CardBus/PCI SCSI host bus adapter module"); 73MODULE_LICENSE("GPL"); 74 75static const char *nsp32_release_version = "1.2"; 76 77 78/**************************************************************************** 79 * Supported hardware 80 */ 81static struct pci_device_id nsp32_pci_table[] __devinitdata = { 82 { 83 .vendor = PCI_VENDOR_ID_IODATA, 84 .device = PCI_DEVICE_ID_NINJASCSI_32BI_CBSC_II, 85 .subvendor = PCI_ANY_ID, 86 .subdevice = PCI_ANY_ID, 87 .driver_data = MODEL_IODATA, 88 }, 89 { 90 .vendor = PCI_VENDOR_ID_WORKBIT, 91 .device = PCI_DEVICE_ID_NINJASCSI_32BI_KME, 92 .subvendor = PCI_ANY_ID, 93 .subdevice = PCI_ANY_ID, 94 .driver_data = MODEL_KME, 95 }, 96 { 97 .vendor = PCI_VENDOR_ID_WORKBIT, 98 .device = PCI_DEVICE_ID_NINJASCSI_32BI_WBT, 99 .subvendor = PCI_ANY_ID, 100 .subdevice = PCI_ANY_ID, 101 .driver_data = MODEL_WORKBIT, 102 }, 103 { 104 .vendor = PCI_VENDOR_ID_WORKBIT, 105 .device = PCI_DEVICE_ID_WORKBIT_STANDARD, 106 .subvendor = PCI_ANY_ID, 107 .subdevice = PCI_ANY_ID, 108 .driver_data = MODEL_PCI_WORKBIT, 109 }, 110 { 111 .vendor = PCI_VENDOR_ID_WORKBIT, 112 .device = PCI_DEVICE_ID_NINJASCSI_32BI_LOGITEC, 113 .subvendor = PCI_ANY_ID, 114 .subdevice = PCI_ANY_ID, 115 .driver_data = MODEL_LOGITEC, 116 }, 117 { 118 .vendor = PCI_VENDOR_ID_WORKBIT, 119 .device = PCI_DEVICE_ID_NINJASCSI_32BIB_LOGITEC, 120 .subvendor = PCI_ANY_ID, 121 .subdevice = PCI_ANY_ID, 122 .driver_data = MODEL_PCI_LOGITEC, 123 }, 124 { 125 .vendor = PCI_VENDOR_ID_WORKBIT, 126 .device = PCI_DEVICE_ID_NINJASCSI_32UDE_MELCO, 127 .subvendor = PCI_ANY_ID, 128 .subdevice = PCI_ANY_ID, 129 .driver_data = MODEL_PCI_MELCO, 130 }, 131 { 132 .vendor = PCI_VENDOR_ID_WORKBIT, 133 .device = PCI_DEVICE_ID_NINJASCSI_32UDE_MELCO_II, 134 .subvendor = PCI_ANY_ID, 135 .subdevice = PCI_ANY_ID, 136 .driver_data = MODEL_PCI_MELCO, 137 }, 138 {0,0,}, 139}; 140MODULE_DEVICE_TABLE(pci, nsp32_pci_table); 141 142static nsp32_hw_data nsp32_data_base; /* probe <-> detect glue */ 143 144 145/* 146 * Period/AckWidth speed conversion table 147 * 148 * Note: This period/ackwidth speed table must be in descending order. 149 */ 150static nsp32_sync_table nsp32_sync_table_40M[] = { 151 /* {PNo, AW, SP, EP, SREQ smpl} Speed(MB/s) Period AckWidth */ 152 {0x1, 0, 0x0c, 0x0c, SMPL_40M}, /* 20.0 : 50ns, 25ns */ 153 {0x2, 0, 0x0d, 0x18, SMPL_40M}, /* 13.3 : 75ns, 25ns */ 154 {0x3, 1, 0x19, 0x19, SMPL_40M}, /* 10.0 : 100ns, 50ns */ 155 {0x4, 1, 0x1a, 0x1f, SMPL_20M}, /* 8.0 : 125ns, 50ns */ 156 {0x5, 2, 0x20, 0x25, SMPL_20M}, /* 6.7 : 150ns, 75ns */ 157 {0x6, 2, 0x26, 0x31, SMPL_20M}, /* 5.7 : 175ns, 75ns */ 158 {0x7, 3, 0x32, 0x32, SMPL_20M}, /* 5.0 : 200ns, 100ns */ 159 {0x8, 3, 0x33, 0x38, SMPL_10M}, /* 4.4 : 225ns, 100ns */ 160 {0x9, 3, 0x39, 0x3e, SMPL_10M}, /* 4.0 : 250ns, 100ns */ 161}; 162 163static nsp32_sync_table nsp32_sync_table_20M[] = { 164 {0x1, 0, 0x19, 0x19, SMPL_40M}, /* 10.0 : 100ns, 50ns */ 165 {0x2, 0, 0x1a, 0x25, SMPL_20M}, /* 6.7 : 150ns, 50ns */ 166 {0x3, 1, 0x26, 0x32, SMPL_20M}, /* 5.0 : 200ns, 100ns */ 167 {0x4, 1, 0x33, 0x3e, SMPL_10M}, /* 4.0 : 250ns, 100ns */ 168 {0x5, 2, 0x3f, 0x4b, SMPL_10M}, /* 3.3 : 300ns, 150ns */ 169 {0x6, 2, 0x4c, 0x57, SMPL_10M}, /* 2.8 : 350ns, 150ns */ 170 {0x7, 3, 0x58, 0x64, SMPL_10M}, /* 2.5 : 400ns, 200ns */ 171 {0x8, 3, 0x65, 0x70, SMPL_10M}, /* 2.2 : 450ns, 200ns */ 172 {0x9, 3, 0x71, 0x7d, SMPL_10M}, /* 2.0 : 500ns, 200ns */ 173}; 174 175static nsp32_sync_table nsp32_sync_table_pci[] = { 176 {0x1, 0, 0x0c, 0x0f, SMPL_40M}, /* 16.6 : 60ns, 30ns */ 177 {0x2, 0, 0x10, 0x16, SMPL_40M}, /* 11.1 : 90ns, 30ns */ 178 {0x3, 1, 0x17, 0x1e, SMPL_20M}, /* 8.3 : 120ns, 60ns */ 179 {0x4, 1, 0x1f, 0x25, SMPL_20M}, /* 6.7 : 150ns, 60ns */ 180 {0x5, 2, 0x26, 0x2d, SMPL_20M}, /* 5.6 : 180ns, 90ns */ 181 {0x6, 2, 0x2e, 0x34, SMPL_10M}, /* 4.8 : 210ns, 90ns */ 182 {0x7, 3, 0x35, 0x3c, SMPL_10M}, /* 4.2 : 240ns, 120ns */ 183 {0x8, 3, 0x3d, 0x43, SMPL_10M}, /* 3.7 : 270ns, 120ns */ 184 {0x9, 3, 0x44, 0x4b, SMPL_10M}, /* 3.3 : 300ns, 120ns */ 185}; 186 187/* 188 * function declaration 189 */ 190/* module entry point */ 191static int __devinit nsp32_probe (struct pci_dev *, const struct pci_device_id *); 192static void __devexit nsp32_remove(struct pci_dev *); 193static int __init init_nsp32 (void); 194static void __exit exit_nsp32 (void); 195 196/* struct struct scsi_host_template */ 197static int nsp32_proc_info (struct Scsi_Host *, char *, char **, off_t, int, int); 198 199static int nsp32_detect (struct pci_dev *pdev); 200static int nsp32_queuecommand(struct scsi_cmnd *, 201 void (*done)(struct scsi_cmnd *)); 202static const char *nsp32_info (struct Scsi_Host *); 203static int nsp32_release (struct Scsi_Host *); 204 205/* SCSI error handler */ 206static int nsp32_eh_abort (struct scsi_cmnd *); 207static int nsp32_eh_bus_reset (struct scsi_cmnd *); 208static int nsp32_eh_host_reset(struct scsi_cmnd *); 209 210/* generate SCSI message */ 211static void nsp32_build_identify(struct scsi_cmnd *); 212static void nsp32_build_nop (struct scsi_cmnd *); 213static void nsp32_build_reject (struct scsi_cmnd *); 214static void nsp32_build_sdtr (struct scsi_cmnd *, unsigned char, unsigned char); 215 216/* SCSI message handler */ 217static int nsp32_busfree_occur(struct scsi_cmnd *, unsigned short); 218static void nsp32_msgout_occur (struct scsi_cmnd *); 219static void nsp32_msgin_occur (struct scsi_cmnd *, unsigned long, unsigned short); 220 221static int nsp32_setup_sg_table (struct scsi_cmnd *); 222static int nsp32_selection_autopara(struct scsi_cmnd *); 223static int nsp32_selection_autoscsi(struct scsi_cmnd *); 224static void nsp32_scsi_done (struct scsi_cmnd *); 225static int nsp32_arbitration (struct scsi_cmnd *, unsigned int); 226static int nsp32_reselection (struct scsi_cmnd *, unsigned char); 227static void nsp32_adjust_busfree (struct scsi_cmnd *, unsigned int); 228static void nsp32_restart_autoscsi (struct scsi_cmnd *, unsigned short); 229 230/* SCSI SDTR */ 231static void nsp32_analyze_sdtr (struct scsi_cmnd *); 232static int nsp32_search_period_entry(nsp32_hw_data *, nsp32_target *, unsigned char); 233static void nsp32_set_async (nsp32_hw_data *, nsp32_target *); 234static void nsp32_set_max_sync (nsp32_hw_data *, nsp32_target *, unsigned char *, unsigned char *); 235static void nsp32_set_sync_entry (nsp32_hw_data *, nsp32_target *, int, unsigned char); 236 237/* SCSI bus status handler */ 238static void nsp32_wait_req (nsp32_hw_data *, int); 239static void nsp32_wait_sack (nsp32_hw_data *, int); 240static void nsp32_sack_assert (nsp32_hw_data *); 241static void nsp32_sack_negate (nsp32_hw_data *); 242static void nsp32_do_bus_reset(nsp32_hw_data *); 243 244/* hardware interrupt handler */ 245static irqreturn_t do_nsp32_isr(int, void *); 246 247/* initialize hardware */ 248static int nsp32hw_init(nsp32_hw_data *); 249 250/* EEPROM handler */ 251static int nsp32_getprom_param (nsp32_hw_data *); 252static int nsp32_getprom_at24 (nsp32_hw_data *); 253static int nsp32_getprom_c16 (nsp32_hw_data *); 254static void nsp32_prom_start (nsp32_hw_data *); 255static void nsp32_prom_stop (nsp32_hw_data *); 256static int nsp32_prom_read (nsp32_hw_data *, int); 257static int nsp32_prom_read_bit (nsp32_hw_data *); 258static void nsp32_prom_write_bit(nsp32_hw_data *, int); 259static void nsp32_prom_set (nsp32_hw_data *, int, int); 260static int nsp32_prom_get (nsp32_hw_data *, int); 261 262/* debug/warning/info message */ 263static void nsp32_message (const char *, int, char *, char *, ...); 264#ifdef NSP32_DEBUG 265static void nsp32_dmessage(const char *, int, int, char *, ...); 266#endif 267 268/* 269 * max_sectors is currently limited up to 128. 270 */ 271static struct scsi_host_template nsp32_template = { 272 .proc_name = "nsp32", 273 .name = "Workbit NinjaSCSI-32Bi/UDE", 274 .proc_info = nsp32_proc_info, 275 .info = nsp32_info, 276 .queuecommand = nsp32_queuecommand, 277 .can_queue = 1, 278 .sg_tablesize = NSP32_SG_SIZE, 279 .max_sectors = 128, 280 .cmd_per_lun = 1, 281 .this_id = NSP32_HOST_SCSIID, 282 .use_clustering = DISABLE_CLUSTERING, 283 .eh_abort_handler = nsp32_eh_abort, 284 .eh_bus_reset_handler = nsp32_eh_bus_reset, 285 .eh_host_reset_handler = nsp32_eh_host_reset, 286/* .highmem_io = 1, */ 287}; 288 289#include "nsp32_io.h" 290 291/*********************************************************************** 292 * debug, error print 293 */ 294#ifndef NSP32_DEBUG 295# define NSP32_DEBUG_MASK 0x000000 296# define nsp32_msg(type, args...) nsp32_message ("", 0, (type), args) 297# define nsp32_dbg(mask, args...) /* */ 298#else 299# define NSP32_DEBUG_MASK 0xffffff 300# define nsp32_msg(type, args...) \ 301 nsp32_message (__func__, __LINE__, (type), args) 302# define nsp32_dbg(mask, args...) \ 303 nsp32_dmessage(__func__, __LINE__, (mask), args) 304#endif 305 306#define NSP32_DEBUG_QUEUECOMMAND BIT(0) 307#define NSP32_DEBUG_REGISTER BIT(1) 308#define NSP32_DEBUG_AUTOSCSI BIT(2) 309#define NSP32_DEBUG_INTR BIT(3) 310#define NSP32_DEBUG_SGLIST BIT(4) 311#define NSP32_DEBUG_BUSFREE BIT(5) 312#define NSP32_DEBUG_CDB_CONTENTS BIT(6) 313#define NSP32_DEBUG_RESELECTION BIT(7) 314#define NSP32_DEBUG_MSGINOCCUR BIT(8) 315#define NSP32_DEBUG_EEPROM BIT(9) 316#define NSP32_DEBUG_MSGOUTOCCUR BIT(10) 317#define NSP32_DEBUG_BUSRESET BIT(11) 318#define NSP32_DEBUG_RESTART BIT(12) 319#define NSP32_DEBUG_SYNC BIT(13) 320#define NSP32_DEBUG_WAIT BIT(14) 321#define NSP32_DEBUG_TARGETFLAG BIT(15) 322#define NSP32_DEBUG_PROC BIT(16) 323#define NSP32_DEBUG_INIT BIT(17) 324#define NSP32_SPECIAL_PRINT_REGISTER BIT(20) 325 326#define NSP32_DEBUG_BUF_LEN 100 327 328static void nsp32_message(const char *func, int line, char *type, char *fmt, ...) 329{ 330 va_list args; 331 char buf[NSP32_DEBUG_BUF_LEN]; 332 333 va_start(args, fmt); 334 vsnprintf(buf, sizeof(buf), fmt, args); 335 va_end(args); 336 337#ifndef NSP32_DEBUG 338 printk("%snsp32: %s\n", type, buf); 339#else 340 printk("%snsp32: %s (%d): %s\n", type, func, line, buf); 341#endif 342} 343 344#ifdef NSP32_DEBUG 345static void nsp32_dmessage(const char *func, int line, int mask, char *fmt, ...) 346{ 347 va_list args; 348 char buf[NSP32_DEBUG_BUF_LEN]; 349 350 va_start(args, fmt); 351 vsnprintf(buf, sizeof(buf), fmt, args); 352 va_end(args); 353 354 if (mask & NSP32_DEBUG_MASK) { 355 printk("nsp32-debug: 0x%x %s (%d): %s\n", mask, func, line, buf); 356 } 357} 358#endif 359 360#ifdef NSP32_DEBUG 361# include "nsp32_debug.c" 362#else 363# define show_command(arg) /* */ 364# define show_busphase(arg) /* */ 365# define show_autophase(arg) /* */ 366#endif 367 368/* 369 * IDENTIFY Message 370 */ 371static void nsp32_build_identify(struct scsi_cmnd *SCpnt) 372{ 373 nsp32_hw_data *data = (nsp32_hw_data *)SCpnt->device->host->hostdata; 374 int pos = data->msgout_len; 375 int mode = FALSE; 376 377 /* XXX: Auto DiscPriv detection is progressing... */ 378 if (disc_priv == 0) { 379 /* mode = TRUE; */ 380 } 381 382 data->msgoutbuf[pos] = IDENTIFY(mode, SCpnt->device->lun); pos++; 383 384 data->msgout_len = pos; 385} 386 387/* 388 * SDTR Message Routine 389 */ 390static void nsp32_build_sdtr(struct scsi_cmnd *SCpnt, 391 unsigned char period, 392 unsigned char offset) 393{ 394 nsp32_hw_data *data = (nsp32_hw_data *)SCpnt->device->host->hostdata; 395 int pos = data->msgout_len; 396 397 data->msgoutbuf[pos] = EXTENDED_MESSAGE; pos++; 398 data->msgoutbuf[pos] = EXTENDED_SDTR_LEN; pos++; 399 data->msgoutbuf[pos] = EXTENDED_SDTR; pos++; 400 data->msgoutbuf[pos] = period; pos++; 401 data->msgoutbuf[pos] = offset; pos++; 402 403 data->msgout_len = pos; 404} 405 406/* 407 * No Operation Message 408 */ 409static void nsp32_build_nop(struct scsi_cmnd *SCpnt) 410{ 411 nsp32_hw_data *data = (nsp32_hw_data *)SCpnt->device->host->hostdata; 412 int pos = data->msgout_len; 413 414 if (pos != 0) { 415 nsp32_msg(KERN_WARNING, 416 "Some messages are already contained!"); 417 return; 418 } 419 420 data->msgoutbuf[pos] = NOP; pos++; 421 data->msgout_len = pos; 422} 423 424/* 425 * Reject Message 426 */ 427static void nsp32_build_reject(struct scsi_cmnd *SCpnt) 428{ 429 nsp32_hw_data *data = (nsp32_hw_data *)SCpnt->device->host->hostdata; 430 int pos = data->msgout_len; 431 432 data->msgoutbuf[pos] = MESSAGE_REJECT; pos++; 433 data->msgout_len = pos; 434} 435 436/* 437 * timer 438 */ 439#if 0 440static void nsp32_start_timer(struct scsi_cmnd *SCpnt, int time) 441{ 442 unsigned int base = SCpnt->host->io_port; 443 444 nsp32_dbg(NSP32_DEBUG_INTR, "timer=%d", time); 445 446 if (time & (~TIMER_CNT_MASK)) { 447 nsp32_dbg(NSP32_DEBUG_INTR, "timer set overflow"); 448 } 449 450 nsp32_write2(base, TIMER_SET, time & TIMER_CNT_MASK); 451} 452#endif 453 454 455/* 456 * set SCSI command and other parameter to asic, and start selection phase 457 */ 458static int nsp32_selection_autopara(struct scsi_cmnd *SCpnt) 459{ 460 nsp32_hw_data *data = (nsp32_hw_data *)SCpnt->device->host->hostdata; 461 unsigned int base = SCpnt->device->host->io_port; 462 unsigned int host_id = SCpnt->device->host->this_id; 463 unsigned char target = scmd_id(SCpnt); 464 nsp32_autoparam *param = data->autoparam; 465 unsigned char phase; 466 int i, ret; 467 unsigned int msgout; 468 u16_le s; 469 470 nsp32_dbg(NSP32_DEBUG_AUTOSCSI, "in"); 471 472 /* 473 * check bus free 474 */ 475 phase = nsp32_read1(base, SCSI_BUS_MONITOR); 476 if (phase != BUSMON_BUS_FREE) { 477 nsp32_msg(KERN_WARNING, "bus busy"); 478 show_busphase(phase & BUSMON_PHASE_MASK); 479 SCpnt->result = DID_BUS_BUSY << 16; 480 return FALSE; 481 } 482 483 /* 484 * message out 485 * 486 * Note: If the range of msgout_len is 1 - 3, fill scsi_msgout. 487 * over 3 messages needs another routine. 488 */ 489 if (data->msgout_len == 0) { 490 nsp32_msg(KERN_ERR, "SCSI MsgOut without any message!"); 491 SCpnt->result = DID_ERROR << 16; 492 return FALSE; 493 } else if (data->msgout_len > 0 && data->msgout_len <= 3) { 494 msgout = 0; 495 for (i = 0; i < data->msgout_len; i++) { 496 /* 497 * the sending order of the message is: 498 * MCNT 3: MSG#0 -> MSG#1 -> MSG#2 499 * MCNT 2: MSG#1 -> MSG#2 500 * MCNT 1: MSG#2 501 */ 502 msgout >>= 8; 503 msgout |= ((unsigned int)(data->msgoutbuf[i]) << 24); 504 } 505 msgout |= MV_VALID; /* MV valid */ 506 msgout |= (unsigned int)data->msgout_len; /* len */ 507 } else { 508 /* data->msgout_len > 3 */ 509 msgout = 0; 510 } 511 512 // nsp_dbg(NSP32_DEBUG_AUTOSCSI, "sel time out=0x%x\n", nsp32_read2(base, SEL_TIME_OUT)); 513 // nsp32_write2(base, SEL_TIME_OUT, SEL_TIMEOUT_TIME); 514 515 /* 516 * setup asic parameter 517 */ 518 memset(param, 0, sizeof(nsp32_autoparam)); 519 520 /* cdb */ 521 for (i = 0; i < SCpnt->cmd_len; i++) { 522 param->cdb[4 * i] = SCpnt->cmnd[i]; 523 } 524 525 /* outgoing messages */ 526 param->msgout = cpu_to_le32(msgout); 527 528 /* syncreg, ackwidth, target id, SREQ sampling rate */ 529 param->syncreg = data->cur_target->syncreg; 530 param->ackwidth = data->cur_target->ackwidth; 531 param->target_id = BIT(host_id) | BIT(target); 532 param->sample_reg = data->cur_target->sample_reg; 533 534 // nsp32_dbg(NSP32_DEBUG_AUTOSCSI, "sample rate=0x%x\n", data->cur_target->sample_reg); 535 536 /* command control */ 537 param->command_control = cpu_to_le16(CLEAR_CDB_FIFO_POINTER | 538 AUTOSCSI_START | 539 AUTO_MSGIN_00_OR_04 | 540 AUTO_MSGIN_02 | 541 AUTO_ATN ); 542 543 544 /* transfer control */ 545 s = 0; 546 switch (data->trans_method) { 547 case NSP32_TRANSFER_BUSMASTER: 548 s |= BM_START; 549 break; 550 case NSP32_TRANSFER_MMIO: 551 s |= CB_MMIO_MODE; 552 break; 553 case NSP32_TRANSFER_PIO: 554 s |= CB_IO_MODE; 555 break; 556 default: 557 nsp32_msg(KERN_ERR, "unknown trans_method"); 558 break; 559 } 560 /* 561 * OR-ed BLIEND_MODE, FIFO intr is decreased, instead of PCI bus waits. 562 * For bus master transfer, it's taken off. 563 */ 564 s |= (TRANSFER_GO | ALL_COUNTER_CLR); 565 param->transfer_control = cpu_to_le16(s); 566 567 /* sg table addr */ 568 param->sgt_pointer = cpu_to_le32(data->cur_lunt->sglun_paddr); 569 570 /* 571 * transfer parameter to ASIC 572 */ 573 nsp32_write4(base, SGT_ADR, data->auto_paddr); 574 nsp32_write2(base, COMMAND_CONTROL, CLEAR_CDB_FIFO_POINTER | 575 AUTO_PARAMETER ); 576 577 /* 578 * Check arbitration 579 */ 580 ret = nsp32_arbitration(SCpnt, base); 581 582 return ret; 583} 584 585 586/* 587 * Selection with AUTO SCSI (without AUTO PARAMETER) 588 */ 589static int nsp32_selection_autoscsi(struct scsi_cmnd *SCpnt) 590{ 591 nsp32_hw_data *data = (nsp32_hw_data *)SCpnt->device->host->hostdata; 592 unsigned int base = SCpnt->device->host->io_port; 593 unsigned int host_id = SCpnt->device->host->this_id; 594 unsigned char target = scmd_id(SCpnt); 595 unsigned char phase; 596 int status; 597 unsigned short command = 0; 598 unsigned int msgout = 0; 599 unsigned short execph; 600 int i; 601 602 nsp32_dbg(NSP32_DEBUG_AUTOSCSI, "in"); 603 604 /* 605 * IRQ disable 606 */ 607 nsp32_write2(base, IRQ_CONTROL, IRQ_CONTROL_ALL_IRQ_MASK); 608 609 /* 610 * check bus line 611 */ 612 phase = nsp32_read1(base, SCSI_BUS_MONITOR); 613 if(((phase & BUSMON_BSY) == 1) || (phase & BUSMON_SEL) == 1) { 614 nsp32_msg(KERN_WARNING, "bus busy"); 615 SCpnt->result = DID_BUS_BUSY << 16; 616 status = 1; 617 goto out; 618 } 619 620 /* 621 * clear execph 622 */ 623 execph = nsp32_read2(base, SCSI_EXECUTE_PHASE); 624 625 /* 626 * clear FIFO counter to set CDBs 627 */ 628 nsp32_write2(base, COMMAND_CONTROL, CLEAR_CDB_FIFO_POINTER); 629 630 /* 631 * set CDB0 - CDB15 632 */ 633 for (i = 0; i < SCpnt->cmd_len; i++) { 634 nsp32_write1(base, COMMAND_DATA, SCpnt->cmnd[i]); 635 } 636 nsp32_dbg(NSP32_DEBUG_CDB_CONTENTS, "CDB[0]=[0x%x]", SCpnt->cmnd[0]); 637 638 /* 639 * set SCSIOUT LATCH(initiator)/TARGET(target) (OR-ed) ID 640 */ 641 nsp32_write1(base, SCSI_OUT_LATCH_TARGET_ID, BIT(host_id) | BIT(target)); 642 643 /* 644 * set SCSI MSGOUT REG 645 * 646 * Note: If the range of msgout_len is 1 - 3, fill scsi_msgout. 647 * over 3 messages needs another routine. 648 */ 649 if (data->msgout_len == 0) { 650 nsp32_msg(KERN_ERR, "SCSI MsgOut without any message!"); 651 SCpnt->result = DID_ERROR << 16; 652 status = 1; 653 goto out; 654 } else if (data->msgout_len > 0 && data->msgout_len <= 3) { 655 msgout = 0; 656 for (i = 0; i < data->msgout_len; i++) { 657 /* 658 * the sending order of the message is: 659 * MCNT 3: MSG#0 -> MSG#1 -> MSG#2 660 * MCNT 2: MSG#1 -> MSG#2 661 * MCNT 1: MSG#2 662 */ 663 msgout >>= 8; 664 msgout |= ((unsigned int)(data->msgoutbuf[i]) << 24); 665 } 666 msgout |= MV_VALID; /* MV valid */ 667 msgout |= (unsigned int)data->msgout_len; /* len */ 668 nsp32_write4(base, SCSI_MSG_OUT, msgout); 669 } else { 670 /* data->msgout_len > 3 */ 671 nsp32_write4(base, SCSI_MSG_OUT, 0); 672 } 673 674 /* 675 * set selection timeout(= 250ms) 676 */ 677 nsp32_write2(base, SEL_TIME_OUT, SEL_TIMEOUT_TIME); 678 679 /* 680 * set SREQ hazard killer sampling rate 681 * 682 * TODO: sample_rate (BASE+0F) is 0 when internal clock = 40MHz. 683 * check other internal clock! 684 */ 685 nsp32_write1(base, SREQ_SMPL_RATE, data->cur_target->sample_reg); 686 687 /* 688 * clear Arbit 689 */ 690 nsp32_write1(base, SET_ARBIT, ARBIT_CLEAR); 691 692 /* 693 * set SYNCREG 694 * Don't set BM_START_ADR before setting this register. 695 */ 696 nsp32_write1(base, SYNC_REG, data->cur_target->syncreg); 697 698 /* 699 * set ACKWIDTH 700 */ 701 nsp32_write1(base, ACK_WIDTH, data->cur_target->ackwidth); 702 703 nsp32_dbg(NSP32_DEBUG_AUTOSCSI, 704 "syncreg=0x%x, ackwidth=0x%x, sgtpaddr=0x%x, id=0x%x", 705 nsp32_read1(base, SYNC_REG), nsp32_read1(base, ACK_WIDTH), 706 nsp32_read4(base, SGT_ADR), nsp32_read1(base, SCSI_OUT_LATCH_TARGET_ID)); 707 nsp32_dbg(NSP32_DEBUG_AUTOSCSI, "msgout_len=%d, msgout=0x%x", 708 data->msgout_len, msgout); 709 710 /* 711 * set SGT ADDR (physical address) 712 */ 713 nsp32_write4(base, SGT_ADR, data->cur_lunt->sglun_paddr); 714 715 /* 716 * set TRANSFER CONTROL REG 717 */ 718 command = 0; 719 command |= (TRANSFER_GO | ALL_COUNTER_CLR); 720 if (data->trans_method & NSP32_TRANSFER_BUSMASTER) { 721 if (scsi_bufflen(SCpnt) > 0) { 722 command |= BM_START; 723 } 724 } else if (data->trans_method & NSP32_TRANSFER_MMIO) { 725 command |= CB_MMIO_MODE; 726 } else if (data->trans_method & NSP32_TRANSFER_PIO) { 727 command |= CB_IO_MODE; 728 } 729 nsp32_write2(base, TRANSFER_CONTROL, command); 730 731 /* 732 * start AUTO SCSI, kick off arbitration 733 */ 734 command = (CLEAR_CDB_FIFO_POINTER | 735 AUTOSCSI_START | 736 AUTO_MSGIN_00_OR_04 | 737 AUTO_MSGIN_02 | 738 AUTO_ATN ); 739 nsp32_write2(base, COMMAND_CONTROL, command); 740 741 /* 742 * Check arbitration 743 */ 744 status = nsp32_arbitration(SCpnt, base); 745 746 out: 747 /* 748 * IRQ enable 749 */ 750 nsp32_write2(base, IRQ_CONTROL, 0); 751 752 return status; 753} 754 755 756/* 757 * Arbitration Status Check 758 * 759 * Note: Arbitration counter is waited during ARBIT_GO is not lifting. 760 * Using udelay(1) consumes CPU time and system time, but 761 * arbitration delay time is defined minimal 2.4us in SCSI 762 * specification, thus udelay works as coarse grained wait timer. 763 */ 764static int nsp32_arbitration(struct scsi_cmnd *SCpnt, unsigned int base) 765{ 766 unsigned char arbit; 767 int status = TRUE; 768 int time = 0; 769 770 do { 771 arbit = nsp32_read1(base, ARBIT_STATUS); 772 time++; 773 } while ((arbit & (ARBIT_WIN | ARBIT_FAIL)) == 0 && 774 (time <= ARBIT_TIMEOUT_TIME)); 775 776 nsp32_dbg(NSP32_DEBUG_AUTOSCSI, 777 "arbit: 0x%x, delay time: %d", arbit, time); 778 779 if (arbit & ARBIT_WIN) { 780 /* Arbitration succeeded */ 781 SCpnt->result = DID_OK << 16; 782 nsp32_index_write1(base, EXT_PORT, LED_ON); /* PCI LED on */ 783 } else if (arbit & ARBIT_FAIL) { 784 /* Arbitration failed */ 785 SCpnt->result = DID_BUS_BUSY << 16; 786 status = FALSE; 787 } else { 788 /* 789 * unknown error or ARBIT_GO timeout, 790 * something lock up! guess no connection. 791 */ 792 nsp32_dbg(NSP32_DEBUG_AUTOSCSI, "arbit timeout"); 793 SCpnt->result = DID_NO_CONNECT << 16; 794 status = FALSE; 795 } 796 797 /* 798 * clear Arbit 799 */ 800 nsp32_write1(base, SET_ARBIT, ARBIT_CLEAR); 801 802 return status; 803} 804 805 806/* 807 * reselection 808 * 809 * Note: This reselection routine is called from msgin_occur, 810 * reselection target id&lun must be already set. 811 * SCSI-2 says IDENTIFY implies RESTORE_POINTER operation. 812 */ 813static int nsp32_reselection(struct scsi_cmnd *SCpnt, unsigned char newlun) 814{ 815 nsp32_hw_data *data = (nsp32_hw_data *)SCpnt->device->host->hostdata; 816 unsigned int host_id = SCpnt->device->host->this_id; 817 unsigned int base = SCpnt->device->host->io_port; 818 unsigned char tmpid, newid; 819 820 nsp32_dbg(NSP32_DEBUG_RESELECTION, "enter"); 821 822 /* 823 * calculate reselected SCSI ID 824 */ 825 tmpid = nsp32_read1(base, RESELECT_ID); 826 tmpid &= (~BIT(host_id)); 827 newid = 0; 828 while (tmpid) { 829 if (tmpid & 1) { 830 break; 831 } 832 tmpid >>= 1; 833 newid++; 834 } 835 836 /* 837 * If reselected New ID:LUN is not existed 838 * or current nexus is not existed, unexpected 839 * reselection is occurred. Send reject message. 840 */ 841 if (newid >= ARRAY_SIZE(data->lunt) || newlun >= ARRAY_SIZE(data->lunt[0])) { 842 nsp32_msg(KERN_WARNING, "unknown id/lun"); 843 return FALSE; 844 } else if(data->lunt[newid][newlun].SCpnt == NULL) { 845 nsp32_msg(KERN_WARNING, "no SCSI command is processing"); 846 return FALSE; 847 } 848 849 data->cur_id = newid; 850 data->cur_lun = newlun; 851 data->cur_target = &(data->target[newid]); 852 data->cur_lunt = &(data->lunt[newid][newlun]); 853 854 /* reset SACK/SavedACK counter (or ALL clear?) */ 855 nsp32_write4(base, CLR_COUNTER, CLRCOUNTER_ALLMASK); 856 857 return TRUE; 858} 859 860 861/* 862 * nsp32_setup_sg_table - build scatter gather list for transfer data 863 * with bus master. 864 * 865 * Note: NinjaSCSI-32Bi/UDE bus master can not transfer over 64KB at a time. 866 */ 867static int nsp32_setup_sg_table(struct scsi_cmnd *SCpnt) 868{ 869 nsp32_hw_data *data = (nsp32_hw_data *)SCpnt->device->host->hostdata; 870 struct scatterlist *sg; 871 nsp32_sgtable *sgt = data->cur_lunt->sglun->sgt; 872 int num, i; 873 u32_le l; 874 875 if (sgt == NULL) { 876 nsp32_dbg(NSP32_DEBUG_SGLIST, "SGT == null"); 877 return FALSE; 878 } 879 880 num = scsi_dma_map(SCpnt); 881 if (!num) 882 return TRUE; 883 else if (num < 0) 884 return FALSE; 885 else { 886 scsi_for_each_sg(SCpnt, sg, num, i) { 887 /* 888 * Build nsp32_sglist, substitute sg dma addresses. 889 */ 890 sgt[i].addr = cpu_to_le32(sg_dma_address(sg)); 891 sgt[i].len = cpu_to_le32(sg_dma_len(sg)); 892 893 if (le32_to_cpu(sgt[i].len) > 0x10000) { 894 nsp32_msg(KERN_ERR, 895 "can't transfer over 64KB at a time, size=0x%lx", le32_to_cpu(sgt[i].len)); 896 return FALSE; 897 } 898 nsp32_dbg(NSP32_DEBUG_SGLIST, 899 "num 0x%x : addr 0x%lx len 0x%lx", 900 i, 901 le32_to_cpu(sgt[i].addr), 902 le32_to_cpu(sgt[i].len )); 903 } 904 905 /* set end mark */ 906 l = le32_to_cpu(sgt[num-1].len); 907 sgt[num-1].len = cpu_to_le32(l | SGTEND); 908 } 909 910 return TRUE; 911} 912 913static int nsp32_queuecommand(struct scsi_cmnd *SCpnt, void (*done)(struct scsi_cmnd *)) 914{ 915 nsp32_hw_data *data = (nsp32_hw_data *)SCpnt->device->host->hostdata; 916 nsp32_target *target; 917 nsp32_lunt *cur_lunt; 918 int ret; 919 920 nsp32_dbg(NSP32_DEBUG_QUEUECOMMAND, 921 "enter. target: 0x%x LUN: 0x%x cmnd: 0x%x cmndlen: 0x%x " 922 "use_sg: 0x%x reqbuf: 0x%lx reqlen: 0x%x", 923 SCpnt->device->id, SCpnt->device->lun, SCpnt->cmnd[0], SCpnt->cmd_len, 924 scsi_sg_count(SCpnt), scsi_sglist(SCpnt), scsi_bufflen(SCpnt)); 925 926 if (data->CurrentSC != NULL) { 927 nsp32_msg(KERN_ERR, "Currentsc != NULL. Cancel this command request"); 928 data->CurrentSC = NULL; 929 SCpnt->result = DID_NO_CONNECT << 16; 930 done(SCpnt); 931 return 0; 932 } 933 934 /* check target ID is not same as this initiator ID */ 935 if (scmd_id(SCpnt) == SCpnt->device->host->this_id) { 936 nsp32_dbg(NSP32_DEBUG_QUEUECOMMAND, "terget==host???"); 937 SCpnt->result = DID_BAD_TARGET << 16; 938 done(SCpnt); 939 return 0; 940 } 941 942 /* check target LUN is allowable value */ 943 if (SCpnt->device->lun >= MAX_LUN) { 944 nsp32_dbg(NSP32_DEBUG_QUEUECOMMAND, "no more lun"); 945 SCpnt->result = DID_BAD_TARGET << 16; 946 done(SCpnt); 947 return 0; 948 } 949 950 show_command(SCpnt); 951 952 SCpnt->scsi_done = done; 953 data->CurrentSC = SCpnt; 954 SCpnt->SCp.Status = CHECK_CONDITION; 955 SCpnt->SCp.Message = 0; 956 scsi_set_resid(SCpnt, scsi_bufflen(SCpnt)); 957 958 SCpnt->SCp.ptr = (char *)scsi_sglist(SCpnt); 959 SCpnt->SCp.this_residual = scsi_bufflen(SCpnt); 960 SCpnt->SCp.buffer = NULL; 961 SCpnt->SCp.buffers_residual = 0; 962 963 /* initialize data */ 964 data->msgout_len = 0; 965 data->msgin_len = 0; 966 cur_lunt = &(data->lunt[SCpnt->device->id][SCpnt->device->lun]); 967 cur_lunt->SCpnt = SCpnt; 968 cur_lunt->save_datp = 0; 969 cur_lunt->msgin03 = FALSE; 970 data->cur_lunt = cur_lunt; 971 data->cur_id = SCpnt->device->id; 972 data->cur_lun = SCpnt->device->lun; 973 974 ret = nsp32_setup_sg_table(SCpnt); 975 if (ret == FALSE) { 976 nsp32_msg(KERN_ERR, "SGT fail"); 977 SCpnt->result = DID_ERROR << 16; 978 nsp32_scsi_done(SCpnt); 979 return 0; 980 } 981 982 /* Build IDENTIFY */ 983 nsp32_build_identify(SCpnt); 984 985 /* 986 * If target is the first time to transfer after the reset 987 * (target don't have SDTR_DONE and SDTR_INITIATOR), sync 988 * message SDTR is needed to do synchronous transfer. 989 */ 990 target = &data->target[scmd_id(SCpnt)]; 991 data->cur_target = target; 992 993 if (!(target->sync_flag & (SDTR_DONE | SDTR_INITIATOR | SDTR_TARGET))) { 994 unsigned char period, offset; 995 996 if (trans_mode != ASYNC_MODE) { 997 nsp32_set_max_sync(data, target, &period, &offset); 998 nsp32_build_sdtr(SCpnt, period, offset); 999 target->sync_flag |= SDTR_INITIATOR; 1000 } else { 1001 nsp32_set_async(data, target); 1002 target->sync_flag |= SDTR_DONE; 1003 } 1004 1005 nsp32_dbg(NSP32_DEBUG_QUEUECOMMAND, 1006 "SDTR: entry: %d start_period: 0x%x offset: 0x%x\n", 1007 target->limit_entry, period, offset); 1008 } else if (target->sync_flag & SDTR_INITIATOR) { 1009 /* 1010 * It was negotiating SDTR with target, sending from the 1011 * initiator, but there are no chance to remove this flag. 1012 * Set async because we don't get proper negotiation. 1013 */ 1014 nsp32_set_async(data, target); 1015 target->sync_flag &= ~SDTR_INITIATOR; 1016 target->sync_flag |= SDTR_DONE; 1017 1018 nsp32_dbg(NSP32_DEBUG_QUEUECOMMAND, 1019 "SDTR_INITIATOR: fall back to async"); 1020 } else if (target->sync_flag & SDTR_TARGET) { 1021 /* 1022 * It was negotiating SDTR with target, sending from target, 1023 * but there are no chance to remove this flag. Set async 1024 * because we don't get proper negotiation. 1025 */ 1026 nsp32_set_async(data, target); 1027 target->sync_flag &= ~SDTR_TARGET; 1028 target->sync_flag |= SDTR_DONE; 1029 1030 nsp32_dbg(NSP32_DEBUG_QUEUECOMMAND, 1031 "Unknown SDTR from target is reached, fall back to async."); 1032 } 1033 1034 nsp32_dbg(NSP32_DEBUG_TARGETFLAG, 1035 "target: %d sync_flag: 0x%x syncreg: 0x%x ackwidth: 0x%x", 1036 SCpnt->device->id, target->sync_flag, target->syncreg, 1037 target->ackwidth); 1038 1039 /* Selection */ 1040 if (auto_param == 0) { 1041 ret = nsp32_selection_autopara(SCpnt); 1042 } else { 1043 ret = nsp32_selection_autoscsi(SCpnt); 1044 } 1045 1046 if (ret != TRUE) { 1047 nsp32_dbg(NSP32_DEBUG_QUEUECOMMAND, "selection fail"); 1048 nsp32_scsi_done(SCpnt); 1049 } 1050 1051 return 0; 1052} 1053 1054/* initialize asic */ 1055static int nsp32hw_init(nsp32_hw_data *data) 1056{ 1057 unsigned int base = data->BaseAddress; 1058 unsigned short irq_stat; 1059 unsigned long lc_reg; 1060 unsigned char power; 1061 1062 lc_reg = nsp32_index_read4(base, CFG_LATE_CACHE); 1063 if ((lc_reg & 0xff00) == 0) { 1064 lc_reg |= (0x20 << 8); 1065 nsp32_index_write2(base, CFG_LATE_CACHE, lc_reg & 0xffff); 1066 } 1067 1068 nsp32_write2(base, IRQ_CONTROL, IRQ_CONTROL_ALL_IRQ_MASK); 1069 nsp32_write2(base, TRANSFER_CONTROL, 0); 1070 nsp32_write4(base, BM_CNT, 0); 1071 nsp32_write2(base, SCSI_EXECUTE_PHASE, 0); 1072 1073 do { 1074 irq_stat = nsp32_read2(base, IRQ_STATUS); 1075 nsp32_dbg(NSP32_DEBUG_INIT, "irq_stat 0x%x", irq_stat); 1076 } while (irq_stat & IRQSTATUS_ANY_IRQ); 1077 1078 /* 1079 * Fill FIFO_FULL_SHLD, FIFO_EMPTY_SHLD. Below parameter is 1080 * designated by specification. 1081 */ 1082 if ((data->trans_method & NSP32_TRANSFER_PIO) || 1083 (data->trans_method & NSP32_TRANSFER_MMIO)) { 1084 nsp32_index_write1(base, FIFO_FULL_SHLD_COUNT, 0x40); 1085 nsp32_index_write1(base, FIFO_EMPTY_SHLD_COUNT, 0x40); 1086 } else if (data->trans_method & NSP32_TRANSFER_BUSMASTER) { 1087 nsp32_index_write1(base, FIFO_FULL_SHLD_COUNT, 0x10); 1088 nsp32_index_write1(base, FIFO_EMPTY_SHLD_COUNT, 0x60); 1089 } else { 1090 nsp32_dbg(NSP32_DEBUG_INIT, "unknown transfer mode"); 1091 } 1092 1093 nsp32_dbg(NSP32_DEBUG_INIT, "full 0x%x emp 0x%x", 1094 nsp32_index_read1(base, FIFO_FULL_SHLD_COUNT), 1095 nsp32_index_read1(base, FIFO_EMPTY_SHLD_COUNT)); 1096 1097 nsp32_index_write1(base, CLOCK_DIV, data->clock); 1098 nsp32_index_write1(base, BM_CYCLE, MEMRD_CMD1 | SGT_AUTO_PARA_MEMED_CMD); 1099 nsp32_write1(base, PARITY_CONTROL, 0); /* parity check is disable */ 1100 1101 /* 1102 * initialize MISC_WRRD register 1103 * 1104 * Note: Designated parameters is obeyed as following: 1105 * MISC_SCSI_DIRECTION_DETECTOR_SELECT: It must be set. 1106 * MISC_MASTER_TERMINATION_SELECT: It must be set. 1107 * MISC_BMREQ_NEGATE_TIMING_SEL: It should be set. 1108 * MISC_AUTOSEL_TIMING_SEL: It should be set. 1109 * MISC_BMSTOP_CHANGE2_NONDATA_PHASE: It should be set. 1110 * MISC_DELAYED_BMSTART: It's selected for safety. 1111 * 1112 * Note: If MISC_BMSTOP_CHANGE2_NONDATA_PHASE is set, then 1113 * we have to set TRANSFERCONTROL_BM_START as 0 and set 1114 * appropriate value before restarting bus master transfer. 1115 */ 1116 nsp32_index_write2(base, MISC_WR, 1117 (SCSI_DIRECTION_DETECTOR_SELECT | 1118 DELAYED_BMSTART | 1119 MASTER_TERMINATION_SELECT | 1120 BMREQ_NEGATE_TIMING_SEL | 1121 AUTOSEL_TIMING_SEL | 1122 BMSTOP_CHANGE2_NONDATA_PHASE)); 1123 1124 nsp32_index_write1(base, TERM_PWR_CONTROL, 0); 1125 power = nsp32_index_read1(base, TERM_PWR_CONTROL); 1126 if (!(power & SENSE)) { 1127 nsp32_msg(KERN_INFO, "term power on"); 1128 nsp32_index_write1(base, TERM_PWR_CONTROL, BPWR); 1129 } 1130 1131 nsp32_write2(base, TIMER_SET, TIMER_STOP); 1132 nsp32_write2(base, TIMER_SET, TIMER_STOP); /* Required 2 times */ 1133 1134 nsp32_write1(base, SYNC_REG, 0); 1135 nsp32_write1(base, ACK_WIDTH, 0); 1136 nsp32_write2(base, SEL_TIME_OUT, SEL_TIMEOUT_TIME); 1137 1138 /* 1139 * enable to select designated IRQ (except for 1140 * IRQSELECT_SERR, IRQSELECT_PERR, IRQSELECT_BMCNTERR) 1141 */ 1142 nsp32_index_write2(base, IRQ_SELECT, IRQSELECT_TIMER_IRQ | 1143 IRQSELECT_SCSIRESET_IRQ | 1144 IRQSELECT_FIFO_SHLD_IRQ | 1145 IRQSELECT_RESELECT_IRQ | 1146 IRQSELECT_PHASE_CHANGE_IRQ | 1147 IRQSELECT_AUTO_SCSI_SEQ_IRQ | 1148 // IRQSELECT_BMCNTERR_IRQ | 1149 IRQSELECT_TARGET_ABORT_IRQ | 1150 IRQSELECT_MASTER_ABORT_IRQ ); 1151 nsp32_write2(base, IRQ_CONTROL, 0); 1152 1153 /* PCI LED off */ 1154 nsp32_index_write1(base, EXT_PORT_DDR, LED_OFF); 1155 nsp32_index_write1(base, EXT_PORT, LED_OFF); 1156 1157 return TRUE; 1158} 1159 1160 1161/* interrupt routine */ 1162static irqreturn_t do_nsp32_isr(int irq, void *dev_id) 1163{ 1164 nsp32_hw_data *data = dev_id; 1165 unsigned int base = data->BaseAddress; 1166 struct scsi_cmnd *SCpnt = data->CurrentSC; 1167 unsigned short auto_stat, irq_stat, trans_stat; 1168 unsigned char busmon, busphase; 1169 unsigned long flags; 1170 int ret; 1171 int handled = 0; 1172 struct Scsi_Host *host = data->Host; 1173 1174 spin_lock_irqsave(host->host_lock, flags); 1175 1176 /* 1177 * IRQ check, then enable IRQ mask 1178 */ 1179 irq_stat = nsp32_read2(base, IRQ_STATUS); 1180 nsp32_dbg(NSP32_DEBUG_INTR, 1181 "enter IRQ: %d, IRQstatus: 0x%x", irq, irq_stat); 1182 /* is this interrupt comes from Ninja asic? */ 1183 if ((irq_stat & IRQSTATUS_ANY_IRQ) == 0) { 1184 nsp32_dbg(NSP32_DEBUG_INTR, "shared interrupt: irq other 0x%x", irq_stat); 1185 goto out2; 1186 } 1187 handled = 1; 1188 nsp32_write2(base, IRQ_CONTROL, IRQ_CONTROL_ALL_IRQ_MASK); 1189 1190 busmon = nsp32_read1(base, SCSI_BUS_MONITOR); 1191 busphase = busmon & BUSMON_PHASE_MASK; 1192 1193 trans_stat = nsp32_read2(base, TRANSFER_STATUS); 1194 if ((irq_stat == 0xffff) && (trans_stat == 0xffff)) { 1195 nsp32_msg(KERN_INFO, "card disconnect"); 1196 if (data->CurrentSC != NULL) { 1197 nsp32_msg(KERN_INFO, "clean up current SCSI command"); 1198 SCpnt->result = DID_BAD_TARGET << 16; 1199 nsp32_scsi_done(SCpnt); 1200 } 1201 goto out; 1202 } 1203 1204 /* Timer IRQ */ 1205 if (irq_stat & IRQSTATUS_TIMER_IRQ) { 1206 nsp32_dbg(NSP32_DEBUG_INTR, "timer stop"); 1207 nsp32_write2(base, TIMER_SET, TIMER_STOP); 1208 goto out; 1209 } 1210 1211 /* SCSI reset */ 1212 if (irq_stat & IRQSTATUS_SCSIRESET_IRQ) { 1213 nsp32_msg(KERN_INFO, "detected someone do bus reset"); 1214 nsp32_do_bus_reset(data); 1215 if (SCpnt != NULL) { 1216 SCpnt->result = DID_RESET << 16; 1217 nsp32_scsi_done(SCpnt); 1218 } 1219 goto out; 1220 } 1221 1222 if (SCpnt == NULL) { 1223 nsp32_msg(KERN_WARNING, "SCpnt==NULL this can't be happened"); 1224 nsp32_msg(KERN_WARNING, "irq_stat=0x%x trans_stat=0x%x", irq_stat, trans_stat); 1225 goto out; 1226 } 1227 1228 /* 1229 * AutoSCSI Interrupt. 1230 * Note: This interrupt is occurred when AutoSCSI is finished. Then 1231 * check SCSIEXECUTEPHASE, and do appropriate action. Each phases are 1232 * recorded when AutoSCSI sequencer has been processed. 1233 */ 1234 if(irq_stat & IRQSTATUS_AUTOSCSI_IRQ) { 1235 /* getting SCSI executed phase */ 1236 auto_stat = nsp32_read2(base, SCSI_EXECUTE_PHASE); 1237 nsp32_write2(base, SCSI_EXECUTE_PHASE, 0); 1238 1239 /* Selection Timeout, go busfree phase. */ 1240 if (auto_stat & SELECTION_TIMEOUT) { 1241 nsp32_dbg(NSP32_DEBUG_INTR, 1242 "selection timeout occurred"); 1243 1244 SCpnt->result = DID_TIME_OUT << 16; 1245 nsp32_scsi_done(SCpnt); 1246 goto out; 1247 } 1248 1249 if (auto_stat & MSGOUT_PHASE) { 1250 /* 1251 * MsgOut phase was processed. 1252 * If MSG_IN_OCCUER is not set, then MsgOut phase is 1253 * completed. Thus, msgout_len must reset. Otherwise, 1254 * nothing to do here. If MSG_OUT_OCCUER is occurred, 1255 * then we will encounter the condition and check. 1256 */ 1257 if (!(auto_stat & MSG_IN_OCCUER) && 1258 (data->msgout_len <= 3)) { 1259 /* 1260 * !MSG_IN_OCCUER && msgout_len <=3 1261 * ---> AutoSCSI with MSGOUTreg is processed. 1262 */ 1263 data->msgout_len = 0; 1264 }; 1265 1266 nsp32_dbg(NSP32_DEBUG_INTR, "MsgOut phase processed"); 1267 } 1268 1269 if ((auto_stat & DATA_IN_PHASE) && 1270 (scsi_get_resid(SCpnt) > 0) && 1271 ((nsp32_read2(base, FIFO_REST_CNT) & FIFO_REST_MASK) != 0)) { 1272 printk( "auto+fifo\n"); 1273 //nsp32_pio_read(SCpnt); 1274 } 1275 1276 if (auto_stat & (DATA_IN_PHASE | DATA_OUT_PHASE)) { 1277 /* DATA_IN_PHASE/DATA_OUT_PHASE was processed. */ 1278 nsp32_dbg(NSP32_DEBUG_INTR, 1279 "Data in/out phase processed"); 1280 1281 /* read BMCNT, SGT pointer addr */ 1282 nsp32_dbg(NSP32_DEBUG_INTR, "BMCNT=0x%lx", 1283 nsp32_read4(base, BM_CNT)); 1284 nsp32_dbg(NSP32_DEBUG_INTR, "addr=0x%lx", 1285 nsp32_read4(base, SGT_ADR)); 1286 nsp32_dbg(NSP32_DEBUG_INTR, "SACK=0x%lx", 1287 nsp32_read4(base, SACK_CNT)); 1288 nsp32_dbg(NSP32_DEBUG_INTR, "SSACK=0x%lx", 1289 nsp32_read4(base, SAVED_SACK_CNT)); 1290 1291 scsi_set_resid(SCpnt, 0); /* all data transfered! */ 1292 } 1293 1294 /* 1295 * MsgIn Occur 1296 */ 1297 if (auto_stat & MSG_IN_OCCUER) { 1298 nsp32_msgin_occur(SCpnt, irq_stat, auto_stat); 1299 } 1300 1301 /* 1302 * MsgOut Occur 1303 */ 1304 if (auto_stat & MSG_OUT_OCCUER) { 1305 nsp32_msgout_occur(SCpnt); 1306 } 1307 1308 /* 1309 * Bus Free Occur 1310 */ 1311 if (auto_stat & BUS_FREE_OCCUER) { 1312 ret = nsp32_busfree_occur(SCpnt, auto_stat); 1313 if (ret == TRUE) { 1314 goto out; 1315 } 1316 } 1317 1318 if (auto_stat & STATUS_PHASE) { 1319 /* 1320 * Read CSB and substitute CSB for SCpnt->result 1321 * to save status phase stutas byte. 1322 * scsi error handler checks host_byte (DID_*: 1323 * low level driver to indicate status), then checks 1324 * status_byte (SCSI status byte). 1325 */ 1326 SCpnt->result = (int)nsp32_read1(base, SCSI_CSB_IN); 1327 } 1328 1329 if (auto_stat & ILLEGAL_PHASE) { 1330 /* Illegal phase is detected. SACK is not back. */ 1331 nsp32_msg(KERN_WARNING, 1332 "AUTO SCSI ILLEGAL PHASE OCCUR!!!!"); 1333 1334 /* TODO: currently we don't have any action... bus reset? */ 1335 1336 /* 1337 * To send back SACK, assert, wait, and negate. 1338 */ 1339 nsp32_sack_assert(data); 1340 nsp32_wait_req(data, NEGATE); 1341 nsp32_sack_negate(data); 1342 1343 } 1344 1345 if (auto_stat & COMMAND_PHASE) { 1346 /* nothing to do */ 1347 nsp32_dbg(NSP32_DEBUG_INTR, "Command phase processed"); 1348 } 1349 1350 if (auto_stat & AUTOSCSI_BUSY) { 1351 /* AutoSCSI is running */ 1352 } 1353 1354 show_autophase(auto_stat); 1355 } 1356 1357 /* FIFO_SHLD_IRQ */ 1358 if (irq_stat & IRQSTATUS_FIFO_SHLD_IRQ) { 1359 nsp32_dbg(NSP32_DEBUG_INTR, "FIFO IRQ"); 1360 1361 switch(busphase) { 1362 case BUSPHASE_DATA_OUT: 1363 nsp32_dbg(NSP32_DEBUG_INTR, "fifo/write"); 1364 1365 //nsp32_pio_write(SCpnt); 1366 1367 break; 1368 1369 case BUSPHASE_DATA_IN: 1370 nsp32_dbg(NSP32_DEBUG_INTR, "fifo/read"); 1371 1372 //nsp32_pio_read(SCpnt); 1373 1374 break; 1375 1376 case BUSPHASE_STATUS: 1377 nsp32_dbg(NSP32_DEBUG_INTR, "fifo/status"); 1378 1379 SCpnt->SCp.Status = nsp32_read1(base, SCSI_CSB_IN); 1380 1381 break; 1382 default: 1383 nsp32_dbg(NSP32_DEBUG_INTR, "fifo/other phase"); 1384 nsp32_dbg(NSP32_DEBUG_INTR, "irq_stat=0x%x trans_stat=0x%x", irq_stat, trans_stat); 1385 show_busphase(busphase); 1386 break; 1387 } 1388 1389 goto out; 1390 } 1391 1392 /* Phase Change IRQ */ 1393 if (irq_stat & IRQSTATUS_PHASE_CHANGE_IRQ) { 1394 nsp32_dbg(NSP32_DEBUG_INTR, "phase change IRQ"); 1395 1396 switch(busphase) { 1397 case BUSPHASE_MESSAGE_IN: 1398 nsp32_dbg(NSP32_DEBUG_INTR, "phase chg/msg in"); 1399 nsp32_msgin_occur(SCpnt, irq_stat, 0); 1400 break; 1401 default: 1402 nsp32_msg(KERN_WARNING, "phase chg/other phase?"); 1403 nsp32_msg(KERN_WARNING, "irq_stat=0x%x trans_stat=0x%x\n", 1404 irq_stat, trans_stat); 1405 show_busphase(busphase); 1406 break; 1407 } 1408 goto out; 1409 } 1410 1411 /* PCI_IRQ */ 1412 if (irq_stat & IRQSTATUS_PCI_IRQ) { 1413 nsp32_dbg(NSP32_DEBUG_INTR, "PCI IRQ occurred"); 1414 /* Do nothing */ 1415 } 1416 1417 /* BMCNTERR_IRQ */ 1418 if (irq_stat & IRQSTATUS_BMCNTERR_IRQ) { 1419 nsp32_msg(KERN_ERR, "Received unexpected BMCNTERR IRQ! "); 1420 /* 1421 * TODO: To be implemented improving bus master 1422 * transfer reliablity when BMCNTERR is occurred in 1423 * AutoSCSI phase described in specification. 1424 */ 1425 } 1426 1427#if 0 1428 nsp32_dbg(NSP32_DEBUG_INTR, 1429 "irq_stat=0x%x trans_stat=0x%x", irq_stat, trans_stat); 1430 show_busphase(busphase); 1431#endif 1432 1433 out: 1434 /* disable IRQ mask */ 1435 nsp32_write2(base, IRQ_CONTROL, 0); 1436 1437 out2: 1438 spin_unlock_irqrestore(host->host_lock, flags); 1439 1440 nsp32_dbg(NSP32_DEBUG_INTR, "exit"); 1441 1442 return IRQ_RETVAL(handled); 1443} 1444 1445#undef SPRINTF 1446#define SPRINTF(args...) \ 1447 do { \ 1448 if(length > (pos - buffer)) { \ 1449 pos += snprintf(pos, length - (pos - buffer) + 1, ## args); \ 1450 nsp32_dbg(NSP32_DEBUG_PROC, "buffer=0x%p pos=0x%p length=%d %d\n", buffer, pos, length, length - (pos - buffer));\ 1451 } \ 1452 } while(0) 1453 1454static int nsp32_proc_info(struct Scsi_Host *host, char *buffer, char **start, 1455 off_t offset, int length, int inout) 1456{ 1457 char *pos = buffer; 1458 int thislength; 1459 unsigned long flags; 1460 nsp32_hw_data *data; 1461 int hostno; 1462 unsigned int base; 1463 unsigned char mode_reg; 1464 int id, speed; 1465 long model; 1466 1467 /* Write is not supported, just return. */ 1468 if (inout == TRUE) { 1469 return -EINVAL; 1470 } 1471 1472 hostno = host->host_no; 1473 data = (nsp32_hw_data *)host->hostdata; 1474 base = host->io_port; 1475 1476 SPRINTF("NinjaSCSI-32 status\n\n"); 1477 SPRINTF("Driver version: %s, $Revision: 1.33 $\n", nsp32_release_version); 1478 SPRINTF("SCSI host No.: %d\n", hostno); 1479 SPRINTF("IRQ: %d\n", host->irq); 1480 SPRINTF("IO: 0x%lx-0x%lx\n", host->io_port, host->io_port + host->n_io_port - 1); 1481 SPRINTF("MMIO(virtual address): 0x%lx-0x%lx\n", host->base, host->base + data->MmioLength - 1); 1482 SPRINTF("sg_tablesize: %d\n", host->sg_tablesize); 1483 SPRINTF("Chip revision: 0x%x\n", (nsp32_read2(base, INDEX_REG) >> 8) & 0xff); 1484 1485 mode_reg = nsp32_index_read1(base, CHIP_MODE); 1486 model = data->pci_devid->driver_data; 1487 1488#ifdef CONFIG_PM 1489 SPRINTF("Power Management: %s\n", (mode_reg & OPTF) ? "yes" : "no"); 1490#endif 1491 SPRINTF("OEM: %ld, %s\n", (mode_reg & (OEM0|OEM1)), nsp32_model[model]); 1492 1493 spin_lock_irqsave(&(data->Lock), flags); 1494 SPRINTF("CurrentSC: 0x%p\n\n", data->CurrentSC); 1495 spin_unlock_irqrestore(&(data->Lock), flags); 1496 1497 1498 SPRINTF("SDTR status\n"); 1499 for (id = 0; id < ARRAY_SIZE(data->target); id++) { 1500 1501 SPRINTF("id %d: ", id); 1502 1503 if (id == host->this_id) { 1504 SPRINTF("----- NinjaSCSI-32 host adapter\n"); 1505 continue; 1506 } 1507 1508 if (data->target[id].sync_flag == SDTR_DONE) { 1509 if (data->target[id].period == 0 && 1510 data->target[id].offset == ASYNC_OFFSET ) { 1511 SPRINTF("async"); 1512 } else { 1513 SPRINTF(" sync"); 1514 } 1515 } else { 1516 SPRINTF(" none"); 1517 } 1518 1519 if (data->target[id].period != 0) { 1520 1521 speed = 1000000 / (data->target[id].period * 4); 1522 1523 SPRINTF(" transfer %d.%dMB/s, offset %d", 1524 speed / 1000, 1525 speed % 1000, 1526 data->target[id].offset 1527 ); 1528 } 1529 SPRINTF("\n"); 1530 } 1531 1532 1533 thislength = pos - (buffer + offset); 1534 1535 if(thislength < 0) { 1536 *start = NULL; 1537 return 0; 1538 } 1539 1540 1541 thislength = min(thislength, length); 1542 *start = buffer + offset; 1543 1544 return thislength; 1545} 1546#undef SPRINTF 1547 1548 1549 1550/* 1551 * Reset parameters and call scsi_done for data->cur_lunt. 1552 * Be careful setting SCpnt->result = DID_* before calling this function. 1553 */ 1554static void nsp32_scsi_done(struct scsi_cmnd *SCpnt) 1555{ 1556 nsp32_hw_data *data = (nsp32_hw_data *)SCpnt->device->host->hostdata; 1557 unsigned int base = SCpnt->device->host->io_port; 1558 1559 scsi_dma_unmap(SCpnt); 1560 1561 /* 1562 * clear TRANSFERCONTROL_BM_START 1563 */ 1564 nsp32_write2(base, TRANSFER_CONTROL, 0); 1565 nsp32_write4(base, BM_CNT, 0); 1566 1567 /* 1568 * call scsi_done 1569 */ 1570 (*SCpnt->scsi_done)(SCpnt); 1571 1572 /* 1573 * reset parameters 1574 */ 1575 data->cur_lunt->SCpnt = NULL; 1576 data->cur_lunt = NULL; 1577 data->cur_target = NULL; 1578 data->CurrentSC = NULL; 1579} 1580 1581 1582/* 1583 * Bus Free Occur 1584 * 1585 * Current Phase is BUSFREE. AutoSCSI is automatically execute BUSFREE phase 1586 * with ACK reply when below condition is matched: 1587 * MsgIn 00: Command Complete. 1588 * MsgIn 02: Save Data Pointer. 1589 * MsgIn 04: Diconnect. 1590 * In other case, unexpected BUSFREE is detected. 1591 */ 1592static int nsp32_busfree_occur(struct scsi_cmnd *SCpnt, unsigned short execph) 1593{ 1594 nsp32_hw_data *data = (nsp32_hw_data *)SCpnt->device->host->hostdata; 1595 unsigned int base = SCpnt->device->host->io_port; 1596 1597 nsp32_dbg(NSP32_DEBUG_BUSFREE, "enter execph=0x%x", execph); 1598 show_autophase(execph); 1599 1600 nsp32_write4(base, BM_CNT, 0); 1601 nsp32_write2(base, TRANSFER_CONTROL, 0); 1602 1603 /* 1604 * MsgIn 02: Save Data Pointer 1605 * 1606 * VALID: 1607 * Save Data Pointer is received. Adjust pointer. 1608 * 1609 * NO-VALID: 1610 * SCSI-3 says if Save Data Pointer is not received, then we restart 1611 * processing and we can't adjust any SCSI data pointer in next data 1612 * phase. 1613 */ 1614 if (execph & MSGIN_02_VALID) { 1615 nsp32_dbg(NSP32_DEBUG_BUSFREE, "MsgIn02_Valid"); 1616 1617 /* 1618 * Check sack_cnt/saved_sack_cnt, then adjust sg table if 1619 * needed. 1620 */ 1621 if (!(execph & MSGIN_00_VALID) && 1622 ((execph & DATA_IN_PHASE) || (execph & DATA_OUT_PHASE))) { 1623 unsigned int sacklen, s_sacklen; 1624 1625 /* 1626 * Read SACK count and SAVEDSACK count, then compare. 1627 */ 1628 sacklen = nsp32_read4(base, SACK_CNT ); 1629 s_sacklen = nsp32_read4(base, SAVED_SACK_CNT); 1630 1631 /* 1632 * If SAVEDSACKCNT == 0, it means SavedDataPointer is 1633 * come after data transfering. 1634 */ 1635 if (s_sacklen > 0) { 1636 /* 1637 * Comparing between sack and savedsack to 1638 * check the condition of AutoMsgIn03. 1639 * 1640 * If they are same, set msgin03 == TRUE, 1641 * COMMANDCONTROL_AUTO_MSGIN_03 is enabled at 1642 * reselection. On the other hand, if they 1643 * aren't same, set msgin03 == FALSE, and 1644 * COMMANDCONTROL_AUTO_MSGIN_03 is disabled at 1645 * reselection. 1646 */ 1647 if (sacklen != s_sacklen) { 1648 data->cur_lunt->msgin03 = FALSE; 1649 } else { 1650 data->cur_lunt->msgin03 = TRUE; 1651 } 1652 1653 nsp32_adjust_busfree(SCpnt, s_sacklen); 1654 } 1655 } 1656 1657 /* This value has not substitude with valid value yet... */ 1658 //data->cur_lunt->save_datp = data->cur_datp; 1659 } else { 1660 /* 1661 * no processing. 1662 */ 1663 } 1664 1665 if (execph & MSGIN_03_VALID) { 1666 /* MsgIn03 was valid to be processed. No need processing. */ 1667 } 1668 1669 /* 1670 * target SDTR check 1671 */ 1672 if (data->cur_target->sync_flag & SDTR_INITIATOR) { 1673 /* 1674 * SDTR negotiation pulled by the initiator has not 1675 * finished yet. Fall back to ASYNC mode. 1676 */ 1677 nsp32_set_async(data, data->cur_target); 1678 data->cur_target->sync_flag &= ~SDTR_INITIATOR; 1679 data->cur_target->sync_flag |= SDTR_DONE; 1680 } else if (data->cur_target->sync_flag & SDTR_TARGET) { 1681 /* 1682 * SDTR negotiation pulled by the target has been 1683 * negotiating. 1684 */ 1685 if (execph & (MSGIN_00_VALID | MSGIN_04_VALID)) { 1686 /* 1687 * If valid message is received, then 1688 * negotiation is succeeded. 1689 */ 1690 } else { 1691 /* 1692 * On the contrary, if unexpected bus free is 1693 * occurred, then negotiation is failed. Fall 1694 * back to ASYNC mode. 1695 */ 1696 nsp32_set_async(data, data->cur_target); 1697 } 1698 data->cur_target->sync_flag &= ~SDTR_TARGET; 1699 data->cur_target->sync_flag |= SDTR_DONE; 1700 } 1701 1702 /* 1703 * It is always ensured by SCSI standard that initiator 1704 * switches into Bus Free Phase after 1705 * receiving message 00 (Command Complete), 04 (Disconnect). 1706 * It's the reason that processing here is valid. 1707 */ 1708 if (execph & MSGIN_00_VALID) { 1709 /* MsgIn 00: Command Complete */ 1710 nsp32_dbg(NSP32_DEBUG_BUSFREE, "command complete"); 1711 1712 SCpnt->SCp.Status = nsp32_read1(base, SCSI_CSB_IN); 1713 SCpnt->SCp.Message = 0; 1714 nsp32_dbg(NSP32_DEBUG_BUSFREE, 1715 "normal end stat=0x%x resid=0x%x\n", 1716 SCpnt->SCp.Status, scsi_get_resid(SCpnt)); 1717 SCpnt->result = (DID_OK << 16) | 1718 (SCpnt->SCp.Message << 8) | 1719 (SCpnt->SCp.Status << 0); 1720 nsp32_scsi_done(SCpnt); 1721 /* All operation is done */ 1722 return TRUE; 1723 } else if (execph & MSGIN_04_VALID) { 1724 /* MsgIn 04: Disconnect */ 1725 SCpnt->SCp.Status = nsp32_read1(base, SCSI_CSB_IN); 1726 SCpnt->SCp.Message = 4; 1727 1728 nsp32_dbg(NSP32_DEBUG_BUSFREE, "disconnect"); 1729 return TRUE; 1730 } else { 1731 /* Unexpected bus free */ 1732 nsp32_msg(KERN_WARNING, "unexpected bus free occurred"); 1733 1734 /* DID_ERROR? */ 1735 //SCpnt->result = (DID_OK << 16) | (SCpnt->SCp.Message << 8) | (SCpnt->SCp.Status << 0); 1736 SCpnt->result = DID_ERROR << 16; 1737 nsp32_scsi_done(SCpnt); 1738 return TRUE; 1739 } 1740 return FALSE; 1741} 1742 1743 1744/* 1745 * nsp32_adjust_busfree - adjusting SG table 1746 * 1747 * Note: This driver adjust the SG table using SCSI ACK 1748 * counter instead of BMCNT counter! 1749 */ 1750static void nsp32_adjust_busfree(struct scsi_cmnd *SCpnt, unsigned int s_sacklen) 1751{ 1752 nsp32_hw_data *data = (nsp32_hw_data *)SCpnt->device->host->hostdata; 1753 int old_entry = data->cur_entry; 1754 int new_entry; 1755 int sg_num = data->cur_lunt->sg_num; 1756 nsp32_sgtable *sgt = data->cur_lunt->sglun->sgt; 1757 unsigned int restlen, sentlen; 1758 u32_le len, addr; 1759 1760 nsp32_dbg(NSP32_DEBUG_SGLIST, "old resid=0x%x", scsi_get_resid(SCpnt)); 1761 1762 /* adjust saved SACK count with 4 byte start address boundary */ 1763 s_sacklen -= le32_to_cpu(sgt[old_entry].addr) & 3; 1764 1765 /* 1766 * calculate new_entry from sack count and each sgt[].len 1767 * calculate the byte which is intent to send 1768 */ 1769 sentlen = 0; 1770 for (new_entry = old_entry; new_entry < sg_num; new_entry++) { 1771 sentlen += (le32_to_cpu(sgt[new_entry].len) & ~SGTEND); 1772 if (sentlen > s_sacklen) { 1773 break; 1774 } 1775 } 1776 1777 /* all sgt is processed */ 1778 if (new_entry == sg_num) { 1779 goto last; 1780 } 1781 1782 if (sentlen == s_sacklen) { 1783 /* XXX: confirm it's ok or not */ 1784 /* In this case, it's ok because we are at 1785 the head element of the sg. restlen is correctly calculated. */ 1786 } 1787 1788 /* calculate the rest length for transfering */ 1789 restlen = sentlen - s_sacklen; 1790 1791 /* update adjusting current SG table entry */ 1792 len = le32_to_cpu(sgt[new_entry].len); 1793 addr = le32_to_cpu(sgt[new_entry].addr); 1794 addr += (len - restlen); 1795 sgt[new_entry].addr = cpu_to_le32(addr); 1796 sgt[new_entry].len = cpu_to_le32(restlen); 1797 1798 /* set cur_entry with new_entry */ 1799 data->cur_entry = new_entry; 1800 1801 return; 1802 1803 last: 1804 if (scsi_get_resid(SCpnt) < sentlen) { 1805 nsp32_msg(KERN_ERR, "resid underflow"); 1806 } 1807 1808 scsi_set_resid(SCpnt, scsi_get_resid(SCpnt) - sentlen); 1809 nsp32_dbg(NSP32_DEBUG_SGLIST, "new resid=0x%x", scsi_get_resid(SCpnt)); 1810 1811 /* update hostdata and lun */ 1812 1813 return; 1814} 1815 1816 1817/* 1818 * It's called MsgOut phase occur. 1819 * NinjaSCSI-32Bi/UDE automatically processes up to 3 messages in 1820 * message out phase. It, however, has more than 3 messages, 1821 * HBA creates the interrupt and we have to process by hand. 1822 */ 1823static void nsp32_msgout_occur(struct scsi_cmnd *SCpnt) 1824{ 1825 nsp32_hw_data *data = (nsp32_hw_data *)SCpnt->device->host->hostdata; 1826 unsigned int base = SCpnt->device->host->io_port; 1827 //unsigned short command; 1828 long new_sgtp; 1829 int i; 1830 1831 nsp32_dbg(NSP32_DEBUG_MSGOUTOCCUR, 1832 "enter: msgout_len: 0x%x", data->msgout_len); 1833 1834 /* 1835 * If MsgOut phase is occurred without having any 1836 * message, then No_Operation is sent (SCSI-2). 1837 */ 1838 if (data->msgout_len == 0) { 1839 nsp32_build_nop(SCpnt); 1840 } 1841 1842 /* 1843 * Set SGTP ADDR current entry for restarting AUTOSCSI, 1844 * because SGTP is incremented next point. 1845 * There is few statement in the specification... 1846 */ 1847 new_sgtp = data->cur_lunt->sglun_paddr + 1848 (data->cur_lunt->cur_entry * sizeof(nsp32_sgtable)); 1849 1850 /* 1851 * send messages 1852 */ 1853 for (i = 0; i < data->msgout_len; i++) { 1854 nsp32_dbg(NSP32_DEBUG_MSGOUTOCCUR, 1855 "%d : 0x%x", i, data->msgoutbuf[i]); 1856 1857 /* 1858 * Check REQ is asserted. 1859 */ 1860 nsp32_wait_req(data, ASSERT); 1861 1862 if (i == (data->msgout_len - 1)) { 1863 /* 1864 * If the last message, set the AutoSCSI restart 1865 * before send back the ack message. AutoSCSI 1866 * restart automatically negate ATN signal. 1867 */ 1868 //command = (AUTO_MSGIN_00_OR_04 | AUTO_MSGIN_02); 1869 //nsp32_restart_autoscsi(SCpnt, command); 1870 nsp32_write2(base, COMMAND_CONTROL, 1871 (CLEAR_CDB_FIFO_POINTER | 1872 AUTO_COMMAND_PHASE | 1873 AUTOSCSI_RESTART | 1874 AUTO_MSGIN_00_OR_04 | 1875 AUTO_MSGIN_02 )); 1876 } 1877 /* 1878 * Write data with SACK, then wait sack is 1879 * automatically negated. 1880 */ 1881 nsp32_write1(base, SCSI_DATA_WITH_ACK, data->msgoutbuf[i]); 1882 nsp32_wait_sack(data, NEGATE); 1883 1884 nsp32_dbg(NSP32_DEBUG_MSGOUTOCCUR, "bus: 0x%x\n", 1885 nsp32_read1(base, SCSI_BUS_MONITOR)); 1886 }; 1887 1888 data->msgout_len = 0; 1889 1890 nsp32_dbg(NSP32_DEBUG_MSGOUTOCCUR, "exit"); 1891} 1892 1893/* 1894 * Restart AutoSCSI 1895 * 1896 * Note: Restarting AutoSCSI needs set: 1897 * SYNC_REG, ACK_WIDTH, SGT_ADR, TRANSFER_CONTROL 1898 */ 1899static void nsp32_restart_autoscsi(struct scsi_cmnd *SCpnt, unsigned short command) 1900{ 1901 nsp32_hw_data *data = (nsp32_hw_data *)SCpnt->device->host->hostdata; 1902 unsigned int base = data->BaseAddress; 1903 unsigned short transfer = 0; 1904 1905 nsp32_dbg(NSP32_DEBUG_RESTART, "enter"); 1906 1907 if (data->cur_target == NULL || data->cur_lunt == NULL) { 1908 nsp32_msg(KERN_ERR, "Target or Lun is invalid"); 1909 } 1910 1911 /* 1912 * set SYNC_REG 1913 * Don't set BM_START_ADR before setting this register. 1914 */ 1915 nsp32_write1(base, SYNC_REG, data->cur_target->syncreg); 1916 1917 /* 1918 * set ACKWIDTH 1919 */ 1920 nsp32_write1(base, ACK_WIDTH, data->cur_target->ackwidth); 1921 1922 /* 1923 * set SREQ hazard killer sampling rate 1924 */ 1925 nsp32_write1(base, SREQ_SMPL_RATE, data->cur_target->sample_reg); 1926 1927 /* 1928 * set SGT ADDR (physical address) 1929 */ 1930 nsp32_write4(base, SGT_ADR, data->cur_lunt->sglun_paddr); 1931 1932 /* 1933 * set TRANSFER CONTROL REG 1934 */ 1935 transfer = 0; 1936 transfer |= (TRANSFER_GO | ALL_COUNTER_CLR); 1937 if (data->trans_method & NSP32_TRANSFER_BUSMASTER) { 1938 if (scsi_bufflen(SCpnt) > 0) { 1939 transfer |= BM_START; 1940 } 1941 } else if (data->trans_method & NSP32_TRANSFER_MMIO) { 1942 transfer |= CB_MMIO_MODE; 1943 } else if (data->trans_method & NSP32_TRANSFER_PIO) { 1944 transfer |= CB_IO_MODE; 1945 } 1946 nsp32_write2(base, TRANSFER_CONTROL, transfer); 1947 1948 /* 1949 * restart AutoSCSI 1950 * 1951 * TODO: COMMANDCONTROL_AUTO_COMMAND_PHASE is needed ? 1952 */ 1953 command |= (CLEAR_CDB_FIFO_POINTER | 1954 AUTO_COMMAND_PHASE | 1955 AUTOSCSI_RESTART ); 1956 nsp32_write2(base, COMMAND_CONTROL, command); 1957 1958 nsp32_dbg(NSP32_DEBUG_RESTART, "exit"); 1959} 1960 1961 1962/* 1963 * cannot run automatically message in occur 1964 */ 1965static void nsp32_msgin_occur(struct scsi_cmnd *SCpnt, 1966 unsigned long irq_status, 1967 unsigned short execph) 1968{ 1969 nsp32_hw_data *data = (nsp32_hw_data *)SCpnt->device->host->hostdata; 1970 unsigned int base = SCpnt->device->host->io_port; 1971 unsigned char msg; 1972 unsigned char msgtype; 1973 unsigned char newlun; 1974 unsigned short command = 0; 1975 int msgclear = TRUE; 1976 long new_sgtp; 1977 int ret; 1978 1979 /* 1980 * read first message 1981 * Use SCSIDATA_W_ACK instead of SCSIDATAIN, because the procedure 1982 * of Message-In have to be processed before sending back SCSI ACK. 1983 */ 1984 msg = nsp32_read1(base, SCSI_DATA_IN); 1985 data->msginbuf[(unsigned char)data->msgin_len] = msg; 1986 msgtype = data->msginbuf[0]; 1987 nsp32_dbg(NSP32_DEBUG_MSGINOCCUR, 1988 "enter: msglen: 0x%x msgin: 0x%x msgtype: 0x%x", 1989 data->msgin_len, msg, msgtype); 1990 1991 /* 1992 * TODO: We need checking whether bus phase is message in? 1993 */ 1994 1995 /* 1996 * assert SCSI ACK 1997 */ 1998 nsp32_sack_assert(data); 1999 2000 /* 2001 * processing IDENTIFY 2002 */ 2003 if (msgtype & 0x80) { 2004 if (!(irq_status & IRQSTATUS_RESELECT_OCCUER)) { 2005 /* Invalid (non reselect) phase */ 2006 goto reject; 2007 } 2008 2009 newlun = msgtype & 0x1f; /* TODO: SPI-3 compliant? */ 2010 ret = nsp32_reselection(SCpnt, newlun); 2011 if (ret == TRUE) { 2012 goto restart; 2013 } else { 2014 goto reject; 2015 } 2016 } 2017 2018 /* 2019 * processing messages except for IDENTIFY 2020 * 2021 * TODO: Messages are all SCSI-2 terminology. SCSI-3 compliance is TODO. 2022 */ 2023 switch (msgtype) { 2024 /* 2025 * 1-byte message 2026 */ 2027 case COMMAND_COMPLETE: 2028 case DISCONNECT: 2029 /* 2030 * These messages should not be occurred. 2031 * They should be processed on AutoSCSI sequencer. 2032 */ 2033 nsp32_msg(KERN_WARNING, 2034 "unexpected message of AutoSCSI MsgIn: 0x%x", msg); 2035 break; 2036 2037 case RESTORE_POINTERS: 2038 /* 2039 * AutoMsgIn03 is disabled, and HBA gets this message. 2040 */ 2041 2042 if ((execph & DATA_IN_PHASE) || (execph & DATA_OUT_PHASE)) { 2043 unsigned int s_sacklen; 2044 2045 s_sacklen = nsp32_read4(base, SAVED_SACK_CNT); 2046 if ((execph & MSGIN_02_VALID) && (s_sacklen > 0)) { 2047 nsp32_adjust_busfree(SCpnt, s_sacklen); 2048 } else { 2049 /* No need to rewrite SGT */ 2050 } 2051 } 2052 data->cur_lunt->msgin03 = FALSE; 2053 2054 /* Update with the new value */ 2055 2056 /* reset SACK/SavedACK counter (or ALL clear?) */ 2057 nsp32_write4(base, CLR_COUNTER, CLRCOUNTER_ALLMASK); 2058 2059 /* 2060 * set new sg pointer 2061 */ 2062 new_sgtp = data->cur_lunt->sglun_paddr + 2063 (data->cur_lunt->cur_entry * sizeof(nsp32_sgtable)); 2064 nsp32_write4(base, SGT_ADR, new_sgtp); 2065 2066 break; 2067 2068 case SAVE_POINTERS: 2069 /* 2070 * These messages should not be occurred. 2071 * They should be processed on AutoSCSI sequencer. 2072 */ 2073 nsp32_msg (KERN_WARNING, 2074 "unexpected message of AutoSCSI MsgIn: SAVE_POINTERS"); 2075 2076 break; 2077 2078 case MESSAGE_REJECT: 2079 /* If previous message_out is sending SDTR, and get 2080 message_reject from target, SDTR negotiation is failed */ 2081 if (data->cur_target->sync_flag & 2082 (SDTR_INITIATOR | SDTR_TARGET)) { 2083 /* 2084 * Current target is negotiating SDTR, but it's 2085 * failed. Fall back to async transfer mode, and set 2086 * SDTR_DONE. 2087 */ 2088 nsp32_set_async(data, data->cur_target); 2089 data->cur_target->sync_flag &= ~SDTR_INITIATOR; 2090 data->cur_target->sync_flag |= SDTR_DONE; 2091 2092 } 2093 break; 2094 2095 case LINKED_CMD_COMPLETE: 2096 case LINKED_FLG_CMD_COMPLETE: 2097 /* queue tag is not supported currently */ 2098 nsp32_msg (KERN_WARNING, 2099 "unsupported message: 0x%x", msgtype); 2100 break; 2101 2102 case INITIATE_RECOVERY: 2103 /* staring ECA (Extended Contingent Allegiance) state. */ 2104 /* This message is declined in SPI2 or later. */ 2105 2106 goto reject; 2107 2108 /* 2109 * 2-byte message 2110 */ 2111 case SIMPLE_QUEUE_TAG: 2112 case 0x23: 2113 /* 2114 * 0x23: Ignore_Wide_Residue is not declared in scsi.h. 2115 * No support is needed. 2116 */ 2117 if (data->msgin_len >= 1) { 2118 goto reject; 2119 } 2120 2121 /* current position is 1-byte of 2 byte */ 2122 msgclear = FALSE; 2123 2124 break; 2125 2126 /* 2127 * extended message 2128 */ 2129 case EXTENDED_MESSAGE: 2130 if (data->msgin_len < 1) { 2131 /* 2132 * Current position does not reach 2-byte 2133 * (2-byte is extended message length). 2134 */ 2135 msgclear = FALSE; 2136 break; 2137 } 2138 2139 if ((data->msginbuf[1] + 1) > data->msgin_len) { 2140 /* 2141 * Current extended message has msginbuf[1] + 2 2142 * (msgin_len starts counting from 0, so buf[1] + 1). 2143 * If current message position is not finished, 2144 * continue receiving message. 2145 */ 2146 msgclear = FALSE; 2147 break; 2148 } 2149 2150 /* 2151 * Reach here means regular length of each type of 2152 * extended messages. 2153 */ 2154 switch (data->msginbuf[2]) { 2155 case EXTENDED_MODIFY_DATA_POINTER: 2156 /* TODO */ 2157 goto reject; /* not implemented yet */ 2158 break; 2159 2160 case EXTENDED_SDTR: 2161 /* 2162 * Exchange this message between initiator and target. 2163 */ 2164 if (data->msgin_len != EXTENDED_SDTR_LEN + 1) { 2165 /* 2166 * received inappropriate message. 2167 */ 2168 goto reject; 2169 break; 2170 } 2171 2172 nsp32_analyze_sdtr(SCpnt); 2173 2174 break; 2175 2176 case EXTENDED_EXTENDED_IDENTIFY: 2177 /* SCSI-I only, not supported. */ 2178 goto reject; /* not implemented yet */ 2179 2180 break; 2181 2182 case EXTENDED_WDTR: 2183 goto reject; /* not implemented yet */ 2184 2185 break; 2186 2187 default: 2188 goto reject; 2189 } 2190 break; 2191 2192 default: 2193 goto reject; 2194 } 2195 2196 restart: 2197 if (msgclear == TRUE) { 2198 data->msgin_len = 0; 2199 2200 /* 2201 * If restarting AutoSCSI, but there are some message to out 2202 * (msgout_len > 0), set AutoATN, and set SCSIMSGOUT as 0 2203 * (MV_VALID = 0). When commandcontrol is written with 2204 * AutoSCSI restart, at the same time MsgOutOccur should be 2205 * happened (however, such situation is really possible...?). 2206 */ 2207 if (data->msgout_len > 0) { 2208 nsp32_write4(base, SCSI_MSG_OUT, 0); 2209 command |= AUTO_ATN; 2210 } 2211 2212 /* 2213 * restart AutoSCSI 2214 * If it's failed, COMMANDCONTROL_AUTO_COMMAND_PHASE is needed. 2215 */ 2216 command |= (AUTO_MSGIN_00_OR_04 | AUTO_MSGIN_02); 2217 2218 /* 2219 * If current msgin03 is TRUE, then flag on. 2220 */ 2221 if (data->cur_lunt->msgin03 == TRUE) { 2222 command |= AUTO_MSGIN_03; 2223 } 2224 data->cur_lunt->msgin03 = FALSE; 2225 } else { 2226 data->msgin_len++; 2227 } 2228 2229 /* 2230 * restart AutoSCSI 2231 */ 2232 nsp32_restart_autoscsi(SCpnt, command); 2233 2234 /* 2235 * wait SCSI REQ negate for REQ-ACK handshake 2236 */ 2237 nsp32_wait_req(data, NEGATE); 2238 2239 /* 2240 * negate SCSI ACK 2241 */ 2242 nsp32_sack_negate(data); 2243 2244 nsp32_dbg(NSP32_DEBUG_MSGINOCCUR, "exit"); 2245 2246 return; 2247 2248 reject: 2249 nsp32_msg(KERN_WARNING, 2250 "invalid or unsupported MessageIn, rejected. " 2251 "current msg: 0x%x (len: 0x%x), processing msg: 0x%x", 2252 msg, data->msgin_len, msgtype); 2253 nsp32_build_reject(SCpnt); 2254 data->msgin_len = 0; 2255 2256 goto restart; 2257} 2258 2259/* 2260 * 2261 */ 2262static void nsp32_analyze_sdtr(struct scsi_cmnd *SCpnt) 2263{ 2264 nsp32_hw_data *data = (nsp32_hw_data *)SCpnt->device->host->hostdata; 2265 nsp32_target *target = data->cur_target; 2266 nsp32_sync_table *synct; 2267 unsigned char get_period = data->msginbuf[3]; 2268 unsigned char get_offset = data->msginbuf[4]; 2269 int entry; 2270 int syncnum; 2271 2272 nsp32_dbg(NSP32_DEBUG_MSGINOCCUR, "enter"); 2273 2274 synct = data->synct; 2275 syncnum = data->syncnum; 2276 2277 /* 2278 * If this inititor sent the SDTR message, then target responds SDTR, 2279 * initiator SYNCREG, ACKWIDTH from SDTR parameter. 2280 * Messages are not appropriate, then send back reject message. 2281 * If initiator did not send the SDTR, but target sends SDTR, 2282 * initiator calculator the appropriate parameter and send back SDTR. 2283 */ 2284 if (target->sync_flag & SDTR_INITIATOR) { 2285 /* 2286 * Initiator sent SDTR, the target responds and 2287 * send back negotiation SDTR. 2288 */ 2289 nsp32_dbg(NSP32_DEBUG_MSGINOCCUR, "target responds SDTR"); 2290 2291 target->sync_flag &= ~SDTR_INITIATOR; 2292 target->sync_flag |= SDTR_DONE; 2293 2294 /* 2295 * offset: 2296 */ 2297 if (get_offset > SYNC_OFFSET) { 2298 /* 2299 * Negotiation is failed, the target send back 2300 * unexpected offset value. 2301 */ 2302 goto reject; 2303 } 2304 2305 if (get_offset == ASYNC_OFFSET) { 2306 /* 2307 * Negotiation is succeeded, the target want 2308 * to fall back into asynchronous transfer mode. 2309 */ 2310 goto async; 2311 } 2312 2313 /* 2314 * period: 2315 * Check whether sync period is too short. If too short, 2316 * fall back to async mode. If it's ok, then investigate 2317 * the received sync period. If sync period is acceptable 2318 * between sync table start_period and end_period, then 2319 * set this I_T nexus as sent offset and period. 2320 * If it's not acceptable, send back reject and fall back 2321 * to async mode. 2322 */ 2323 if (get_period < data->synct[0].period_num) { 2324 /* 2325 * Negotiation is failed, the target send back 2326 * unexpected period value. 2327 */ 2328 goto reject; 2329 } 2330 2331 entry = nsp32_search_period_entry(data, target, get_period); 2332 2333 if (entry < 0) { 2334 /* 2335 * Target want to use long period which is not 2336 * acceptable NinjaSCSI-32Bi/UDE. 2337 */ 2338 goto reject; 2339 } 2340 2341 /* 2342 * Set new sync table and offset in this I_T nexus. 2343 */ 2344 nsp32_set_sync_entry(data, target, entry, get_offset); 2345 } else { 2346 /* Target send SDTR to initiator. */ 2347 nsp32_dbg(NSP32_DEBUG_MSGINOCCUR, "target send SDTR"); 2348 2349 target->sync_flag |= SDTR_INITIATOR; 2350 2351 /* offset: */ 2352 if (get_offset > SYNC_OFFSET) { 2353 /* send back as SYNC_OFFSET */ 2354 get_offset = SYNC_OFFSET; 2355 } 2356 2357 /* period: */ 2358 if (get_period < data->synct[0].period_num) { 2359 get_period = data->synct[0].period_num; 2360 } 2361 2362 entry = nsp32_search_period_entry(data, target, get_period); 2363 2364 if (get_offset == ASYNC_OFFSET || entry < 0) { 2365 nsp32_set_async(data, target); 2366 nsp32_build_sdtr(SCpnt, 0, ASYNC_OFFSET); 2367 } else { 2368 nsp32_set_sync_entry(data, target, entry, get_offset); 2369 nsp32_build_sdtr(SCpnt, get_period, get_offset); 2370 } 2371 } 2372 2373 target->period = get_period; 2374 nsp32_dbg(NSP32_DEBUG_MSGINOCCUR, "exit"); 2375 return; 2376 2377 reject: 2378 /* 2379 * If the current message is unacceptable, send back to the target 2380 * with reject message. 2381 */ 2382 nsp32_build_reject(SCpnt); 2383 2384 async: 2385 nsp32_set_async(data, target); /* set as ASYNC transfer mode */ 2386 2387 target->period = 0; 2388 nsp32_dbg(NSP32_DEBUG_MSGINOCCUR, "exit: set async"); 2389 return; 2390} 2391 2392 2393/* 2394 * Search config entry number matched in sync_table from given 2395 * target and speed period value. If failed to search, return negative value. 2396 */ 2397static int nsp32_search_period_entry(nsp32_hw_data *data, 2398 nsp32_target *target, 2399 unsigned char period) 2400{ 2401 int i; 2402 2403 if (target->limit_entry >= data->syncnum) { 2404 nsp32_msg(KERN_ERR, "limit_entry exceeds syncnum!"); 2405 target->limit_entry = 0; 2406 } 2407 2408 for (i = target->limit_entry; i < data->syncnum; i++) { 2409 if (period >= data->synct[i].start_period && 2410 period <= data->synct[i].end_period) { 2411 break; 2412 } 2413 } 2414 2415 /* 2416 * Check given period value is over the sync_table value. 2417 * If so, return max value. 2418 */ 2419 if (i == data->syncnum) { 2420 i = -1; 2421 } 2422 2423 return i; 2424} 2425 2426 2427/* 2428 * target <-> initiator use ASYNC transfer 2429 */ 2430static void nsp32_set_async(nsp32_hw_data *data, nsp32_target *target) 2431{ 2432 unsigned char period = data->synct[target->limit_entry].period_num; 2433 2434 target->offset = ASYNC_OFFSET; 2435 target->period = 0; 2436 target->syncreg = TO_SYNCREG(period, ASYNC_OFFSET); 2437 target->ackwidth = 0; 2438 target->sample_reg = 0; 2439 2440 nsp32_dbg(NSP32_DEBUG_SYNC, "set async"); 2441} 2442 2443 2444/* 2445 * target <-> initiator use maximum SYNC transfer 2446 */ 2447static void nsp32_set_max_sync(nsp32_hw_data *data, 2448 nsp32_target *target, 2449 unsigned char *period, 2450 unsigned char *offset) 2451{ 2452 unsigned char period_num, ackwidth; 2453 2454 period_num = data->synct[target->limit_entry].period_num; 2455 *period = data->synct[target->limit_entry].start_period; 2456 ackwidth = data->synct[target->limit_entry].ackwidth; 2457 *offset = SYNC_OFFSET; 2458 2459 target->syncreg = TO_SYNCREG(period_num, *offset); 2460 target->ackwidth = ackwidth; 2461 target->offset = *offset; 2462 target->sample_reg = 0; /* disable SREQ sampling */ 2463} 2464 2465 2466/* 2467 * target <-> initiator use entry number speed 2468 */ 2469static void nsp32_set_sync_entry(nsp32_hw_data *data, 2470 nsp32_target *target, 2471 int entry, 2472 unsigned char offset) 2473{ 2474 unsigned char period, ackwidth, sample_rate; 2475 2476 period = data->synct[entry].period_num; 2477 ackwidth = data->synct[entry].ackwidth; 2478 offset = offset; 2479 sample_rate = data->synct[entry].sample_rate; 2480 2481 target->syncreg = TO_SYNCREG(period, offset); 2482 target->ackwidth = ackwidth; 2483 target->offset = offset; 2484 target->sample_reg = sample_rate | SAMPLING_ENABLE; 2485 2486 nsp32_dbg(NSP32_DEBUG_SYNC, "set sync"); 2487} 2488 2489 2490/* 2491 * It waits until SCSI REQ becomes assertion or negation state. 2492 * 2493 * Note: If nsp32_msgin_occur is called, we asserts SCSI ACK. Then 2494 * connected target responds SCSI REQ negation. We have to wait 2495 * SCSI REQ becomes negation in order to negate SCSI ACK signal for 2496 * REQ-ACK handshake. 2497 */ 2498static void nsp32_wait_req(nsp32_hw_data *data, int state) 2499{ 2500 unsigned int base = data->BaseAddress; 2501 int wait_time = 0; 2502 unsigned char bus, req_bit; 2503 2504 if (!((state == ASSERT) || (state == NEGATE))) { 2505 nsp32_msg(KERN_ERR, "unknown state designation"); 2506 } 2507 /* REQ is BIT(5) */ 2508 req_bit = (state == ASSERT ? BUSMON_REQ : 0); 2509 2510 do { 2511 bus = nsp32_read1(base, SCSI_BUS_MONITOR); 2512 if ((bus & BUSMON_REQ) == req_bit) { 2513 nsp32_dbg(NSP32_DEBUG_WAIT, 2514 "wait_time: %d", wait_time); 2515 return; 2516 } 2517 udelay(1); 2518 wait_time++; 2519 } while (wait_time < REQSACK_TIMEOUT_TIME); 2520 2521 nsp32_msg(KERN_WARNING, "wait REQ timeout, req_bit: 0x%x", req_bit); 2522} 2523 2524/* 2525 * It waits until SCSI SACK becomes assertion or negation state. 2526 */ 2527static void nsp32_wait_sack(nsp32_hw_data *data, int state) 2528{ 2529 unsigned int base = data->BaseAddress; 2530 int wait_time = 0; 2531 unsigned char bus, ack_bit; 2532 2533 if (!((state == ASSERT) || (state == NEGATE))) { 2534 nsp32_msg(KERN_ERR, "unknown state designation"); 2535 } 2536 /* ACK is BIT(4) */ 2537 ack_bit = (state == ASSERT ? BUSMON_ACK : 0); 2538 2539 do { 2540 bus = nsp32_read1(base, SCSI_BUS_MONITOR); 2541 if ((bus & BUSMON_ACK) == ack_bit) { 2542 nsp32_dbg(NSP32_DEBUG_WAIT, 2543 "wait_time: %d", wait_time); 2544 return; 2545 } 2546 udelay(1); 2547 wait_time++; 2548 } while (wait_time < REQSACK_TIMEOUT_TIME); 2549 2550 nsp32_msg(KERN_WARNING, "wait SACK timeout, ack_bit: 0x%x", ack_bit); 2551} 2552 2553/* 2554 * assert SCSI ACK 2555 * 2556 * Note: SCSI ACK assertion needs with ACKENB=1, AUTODIRECTION=1. 2557 */ 2558static void nsp32_sack_assert(nsp32_hw_data *data) 2559{ 2560 unsigned int base = data->BaseAddress; 2561 unsigned char busctrl; 2562 2563 busctrl = nsp32_read1(base, SCSI_BUS_CONTROL); 2564 busctrl |= (BUSCTL_ACK | AUTODIRECTION | ACKENB); 2565 nsp32_write1(base, SCSI_BUS_CONTROL, busctrl); 2566} 2567 2568/* 2569 * negate SCSI ACK 2570 */ 2571static void nsp32_sack_negate(nsp32_hw_data *data) 2572{ 2573 unsigned int base = data->BaseAddress; 2574 unsigned char busctrl; 2575 2576 busctrl = nsp32_read1(base, SCSI_BUS_CONTROL); 2577 busctrl &= ~BUSCTL_ACK; 2578 nsp32_write1(base, SCSI_BUS_CONTROL, busctrl); 2579} 2580 2581 2582 2583/* 2584 * Note: n_io_port is defined as 0x7f because I/O register port is 2585 * assigned as: 2586 * 0x800-0x8ff: memory mapped I/O port 2587 * 0x900-0xbff: (map same 0x800-0x8ff I/O port image repeatedly) 2588 * 0xc00-0xfff: CardBus status registers 2589 */ 2590static int nsp32_detect(struct pci_dev *pdev) 2591{ 2592 struct Scsi_Host *host; /* registered host structure */ 2593 struct resource *res; 2594 nsp32_hw_data *data; 2595 int ret; 2596 int i, j; 2597 2598 nsp32_dbg(NSP32_DEBUG_REGISTER, "enter"); 2599 2600 /* 2601 * register this HBA as SCSI device 2602 */ 2603 host = scsi_host_alloc(&nsp32_template, sizeof(nsp32_hw_data)); 2604 if (host == NULL) { 2605 nsp32_msg (KERN_ERR, "failed to scsi register"); 2606 goto err; 2607 } 2608 2609 /* 2610 * set nsp32_hw_data 2611 */ 2612 data = (nsp32_hw_data *)host->hostdata; 2613 2614 memcpy(data, &nsp32_data_base, sizeof(nsp32_hw_data)); 2615 2616 host->irq = data->IrqNumber; 2617 host->io_port = data->BaseAddress; 2618 host->unique_id = data->BaseAddress; 2619 host->n_io_port = data->NumAddress; 2620 host->base = (unsigned long)data->MmioAddress; 2621 2622 data->Host = host; 2623 spin_lock_init(&(data->Lock)); 2624 2625 data->cur_lunt = NULL; 2626 data->cur_target = NULL; 2627 2628 /* 2629 * Bus master transfer mode is supported currently. 2630 */ 2631 data->trans_method = NSP32_TRANSFER_BUSMASTER; 2632 2633 /* 2634 * Set clock div, CLOCK_4 (HBA has own external clock, and 2635 * dividing * 100ns/4). 2636 * Currently CLOCK_4 has only tested, not for CLOCK_2/PCICLK yet. 2637 */ 2638 data->clock = CLOCK_4; 2639 2640 /* 2641 * Select appropriate nsp32_sync_table and set I_CLOCKDIV. 2642 */ 2643 switch (data->clock) { 2644 case CLOCK_4: 2645 /* If data->clock is CLOCK_4, then select 40M sync table. */ 2646 data->synct = nsp32_sync_table_40M; 2647 data->syncnum = ARRAY_SIZE(nsp32_sync_table_40M); 2648 break; 2649 case CLOCK_2: 2650 /* If data->clock is CLOCK_2, then select 20M sync table. */ 2651 data->synct = nsp32_sync_table_20M; 2652 data->syncnum = ARRAY_SIZE(nsp32_sync_table_20M); 2653 break; 2654 case PCICLK: 2655 /* If data->clock is PCICLK, then select pci sync table. */ 2656 data->synct = nsp32_sync_table_pci; 2657 data->syncnum = ARRAY_SIZE(nsp32_sync_table_pci); 2658 break; 2659 default: 2660 nsp32_msg(KERN_WARNING, 2661 "Invalid clock div is selected, set CLOCK_4."); 2662 /* Use default value CLOCK_4 */ 2663 data->clock = CLOCK_4; 2664 data->synct = nsp32_sync_table_40M; 2665 data->syncnum = ARRAY_SIZE(nsp32_sync_table_40M); 2666 } 2667 2668 /* 2669 * setup nsp32_lunt 2670 */ 2671 2672 /* 2673 * setup DMA 2674 */ 2675 if (pci_set_dma_mask(pdev, DMA_32BIT_MASK) != 0) { 2676 nsp32_msg (KERN_ERR, "failed to set PCI DMA mask"); 2677 goto scsi_unregister; 2678 } 2679 2680 /* 2681 * allocate autoparam DMA resource. 2682 */ 2683 data->autoparam = pci_alloc_consistent(pdev, sizeof(nsp32_autoparam), &(data->auto_paddr)); 2684 if (data->autoparam == NULL) { 2685 nsp32_msg(KERN_ERR, "failed to allocate DMA memory"); 2686 goto scsi_unregister; 2687 } 2688 2689 /* 2690 * allocate scatter-gather DMA resource. 2691 */ 2692 data->sg_list = pci_alloc_consistent(pdev, NSP32_SG_TABLE_SIZE, 2693 &(data->sg_paddr)); 2694 if (data->sg_list == NULL) { 2695 nsp32_msg(KERN_ERR, "failed to allocate DMA memory"); 2696 goto free_autoparam; 2697 } 2698 2699 for (i = 0; i < ARRAY_SIZE(data->lunt); i++) { 2700 for (j = 0; j < ARRAY_SIZE(data->lunt[0]); j++) { 2701 int offset = i * ARRAY_SIZE(data->lunt[0]) + j; 2702 nsp32_lunt tmp = { 2703 .SCpnt = NULL, 2704 .save_datp = 0, 2705 .msgin03 = FALSE, 2706 .sg_num = 0, 2707 .cur_entry = 0, 2708 .sglun = &(data->sg_list[offset]), 2709 .sglun_paddr = data->sg_paddr + (offset * sizeof(nsp32_sglun)), 2710 }; 2711 2712 data->lunt[i][j] = tmp; 2713 } 2714 } 2715 2716 /* 2717 * setup target 2718 */ 2719 for (i = 0; i < ARRAY_SIZE(data->target); i++) { 2720 nsp32_target *target = &(data->target[i]); 2721 2722 target->limit_entry = 0; 2723 target->sync_flag = 0; 2724 nsp32_set_async(data, target); 2725 } 2726 2727 /* 2728 * EEPROM check 2729 */ 2730 ret = nsp32_getprom_param(data); 2731 if (ret == FALSE) { 2732 data->resettime = 3; /* default 3 */ 2733 } 2734 2735 /* 2736 * setup HBA 2737 */ 2738 nsp32hw_init(data); 2739 2740 snprintf(data->info_str, sizeof(data->info_str), 2741 "NinjaSCSI-32Bi/UDE: irq %d, io 0x%lx+0x%x", 2742 host->irq, host->io_port, host->n_io_port); 2743 2744 /* 2745 * SCSI bus reset 2746 * 2747 * Note: It's important to reset SCSI bus in initialization phase. 2748 * NinjaSCSI-32Bi/UDE HBA EEPROM seems to exchange SDTR when 2749 * system is coming up, so SCSI devices connected to HBA is set as 2750 * un-asynchronous mode. It brings the merit that this HBA is 2751 * ready to start synchronous transfer without any preparation, 2752 * but we are difficult to control transfer speed. In addition, 2753 * it prevents device transfer speed from effecting EEPROM start-up 2754 * SDTR. NinjaSCSI-32Bi/UDE has the feature if EEPROM is set as 2755 * Auto Mode, then FAST-10M is selected when SCSI devices are 2756 * connected same or more than 4 devices. It should be avoided 2757 * depending on this specification. Thus, resetting the SCSI bus 2758 * restores all connected SCSI devices to asynchronous mode, then 2759 * this driver set SDTR safely later, and we can control all SCSI 2760 * device transfer mode. 2761 */ 2762 nsp32_do_bus_reset(data); 2763 2764 ret = request_irq(host->irq, do_nsp32_isr, IRQF_SHARED, "nsp32", data); 2765 if (ret < 0) { 2766 nsp32_msg(KERN_ERR, "Unable to allocate IRQ for NinjaSCSI32 " 2767 "SCSI PCI controller. Interrupt: %d", host->irq); 2768 goto free_sg_list; 2769 } 2770 2771 /* 2772 * PCI IO register 2773 */ 2774 res = request_region(host->io_port, host->n_io_port, "nsp32"); 2775 if (res == NULL) { 2776 nsp32_msg(KERN_ERR, 2777 "I/O region 0x%lx+0x%lx is already used", 2778 data->BaseAddress, data->NumAddress); 2779 goto free_irq; 2780 } 2781 2782 ret = scsi_add_host(host, &pdev->dev); 2783 if (ret) { 2784 nsp32_msg(KERN_ERR, "failed to add scsi host"); 2785 goto free_region; 2786 } 2787 scsi_scan_host(host); 2788 pci_set_drvdata(pdev, host); 2789 return 0; 2790 2791 free_region: 2792 release_region(host->io_port, host->n_io_port); 2793 2794 free_irq: 2795 free_irq(host->irq, data); 2796 2797 free_sg_list: 2798 pci_free_consistent(pdev, NSP32_SG_TABLE_SIZE, 2799 data->sg_list, data->sg_paddr); 2800 2801 free_autoparam: 2802 pci_free_consistent(pdev, sizeof(nsp32_autoparam), 2803 data->autoparam, data->auto_paddr); 2804 2805 scsi_unregister: 2806 scsi_host_put(host); 2807 2808 err: 2809 return 1; 2810} 2811 2812static int nsp32_release(struct Scsi_Host *host) 2813{ 2814 nsp32_hw_data *data = (nsp32_hw_data *)host->hostdata; 2815 2816 if (data->autoparam) { 2817 pci_free_consistent(data->Pci, sizeof(nsp32_autoparam), 2818 data->autoparam, data->auto_paddr); 2819 } 2820 2821 if (data->sg_list) { 2822 pci_free_consistent(data->Pci, NSP32_SG_TABLE_SIZE, 2823 data->sg_list, data->sg_paddr); 2824 } 2825 2826 if (host->irq) { 2827 free_irq(host->irq, data); 2828 } 2829 2830 if (host->io_port && host->n_io_port) { 2831 release_region(host->io_port, host->n_io_port); 2832 } 2833 2834 if (data->MmioAddress) { 2835 iounmap(data->MmioAddress); 2836 } 2837 2838 return 0; 2839} 2840 2841static const char *nsp32_info(struct Scsi_Host *shpnt) 2842{ 2843 nsp32_hw_data *data = (nsp32_hw_data *)shpnt->hostdata; 2844 2845 return data->info_str; 2846} 2847 2848 2849/**************************************************************************** 2850 * error handler 2851 */ 2852static int nsp32_eh_abort(struct scsi_cmnd *SCpnt) 2853{ 2854 nsp32_hw_data *data = (nsp32_hw_data *)SCpnt->device->host->hostdata; 2855 unsigned int base = SCpnt->device->host->io_port; 2856 2857 nsp32_msg(KERN_WARNING, "abort"); 2858 2859 if (data->cur_lunt->SCpnt == NULL) { 2860 nsp32_dbg(NSP32_DEBUG_BUSRESET, "abort failed"); 2861 return FAILED; 2862 } 2863 2864 if (data->cur_target->sync_flag & (SDTR_INITIATOR | SDTR_TARGET)) { 2865 /* reset SDTR negotiation */ 2866 data->cur_target->sync_flag = 0; 2867 nsp32_set_async(data, data->cur_target); 2868 } 2869 2870 nsp32_write2(base, TRANSFER_CONTROL, 0); 2871 nsp32_write2(base, BM_CNT, 0); 2872 2873 SCpnt->result = DID_ABORT << 16; 2874 nsp32_scsi_done(SCpnt); 2875 2876 nsp32_dbg(NSP32_DEBUG_BUSRESET, "abort success"); 2877 return SUCCESS; 2878} 2879 2880static int nsp32_eh_bus_reset(struct scsi_cmnd *SCpnt) 2881{ 2882 nsp32_hw_data *data = (nsp32_hw_data *)SCpnt->device->host->hostdata; 2883 unsigned int base = SCpnt->device->host->io_port; 2884 2885 spin_lock_irq(SCpnt->device->host->host_lock); 2886 2887 nsp32_msg(KERN_INFO, "Bus Reset"); 2888 nsp32_dbg(NSP32_DEBUG_BUSRESET, "SCpnt=0x%x", SCpnt); 2889 2890 nsp32_write2(base, IRQ_CONTROL, IRQ_CONTROL_ALL_IRQ_MASK); 2891 nsp32_do_bus_reset(data); 2892 nsp32_write2(base, IRQ_CONTROL, 0); 2893 2894 spin_unlock_irq(SCpnt->device->host->host_lock); 2895 return SUCCESS; /* SCSI bus reset is succeeded at any time. */ 2896} 2897 2898static void nsp32_do_bus_reset(nsp32_hw_data *data) 2899{ 2900 unsigned int base = data->BaseAddress; 2901 unsigned short intrdat; 2902 int i; 2903 2904 nsp32_dbg(NSP32_DEBUG_BUSRESET, "in"); 2905 2906 /* 2907 * stop all transfer 2908 * clear TRANSFERCONTROL_BM_START 2909 * clear counter 2910 */ 2911 nsp32_write2(base, TRANSFER_CONTROL, 0); 2912 nsp32_write4(base, BM_CNT, 0); 2913 nsp32_write4(base, CLR_COUNTER, CLRCOUNTER_ALLMASK); 2914 2915 /* 2916 * fall back to asynchronous transfer mode 2917 * initialize SDTR negotiation flag 2918 */ 2919 for (i = 0; i < ARRAY_SIZE(data->target); i++) { 2920 nsp32_target *target = &data->target[i]; 2921 2922 target->sync_flag = 0; 2923 nsp32_set_async(data, target); 2924 } 2925 2926 /* 2927 * reset SCSI bus 2928 */ 2929 nsp32_write1(base, SCSI_BUS_CONTROL, BUSCTL_RST); 2930 udelay(RESET_HOLD_TIME); 2931 nsp32_write1(base, SCSI_BUS_CONTROL, 0); 2932 for(i = 0; i < 5; i++) { 2933 intrdat = nsp32_read2(base, IRQ_STATUS); /* dummy read */ 2934 nsp32_dbg(NSP32_DEBUG_BUSRESET, "irq:1: 0x%x", intrdat); 2935 } 2936 2937 data->CurrentSC = NULL; 2938} 2939 2940static int nsp32_eh_host_reset(struct scsi_cmnd *SCpnt) 2941{ 2942 struct Scsi_Host *host = SCpnt->device->host; 2943 unsigned int base = SCpnt->device->host->io_port; 2944 nsp32_hw_data *data = (nsp32_hw_data *)host->hostdata; 2945 2946 nsp32_msg(KERN_INFO, "Host Reset"); 2947 nsp32_dbg(NSP32_DEBUG_BUSRESET, "SCpnt=0x%x", SCpnt); 2948 2949 spin_lock_irq(SCpnt->device->host->host_lock); 2950 2951 nsp32hw_init(data); 2952 nsp32_write2(base, IRQ_CONTROL, IRQ_CONTROL_ALL_IRQ_MASK); 2953 nsp32_do_bus_reset(data); 2954 nsp32_write2(base, IRQ_CONTROL, 0); 2955 2956 spin_unlock_irq(SCpnt->device->host->host_lock); 2957 return SUCCESS; /* Host reset is succeeded at any time. */ 2958} 2959 2960 2961/************************************************************************** 2962 * EEPROM handler 2963 */ 2964 2965/* 2966 * getting EEPROM parameter 2967 */ 2968static int nsp32_getprom_param(nsp32_hw_data *data) 2969{ 2970 int vendor = data->pci_devid->vendor; 2971 int device = data->pci_devid->device; 2972 int ret, val, i; 2973 2974 /* 2975 * EEPROM checking. 2976 */ 2977 ret = nsp32_prom_read(data, 0x7e); 2978 if (ret != 0x55) { 2979 nsp32_msg(KERN_INFO, "No EEPROM detected: 0x%x", ret); 2980 return FALSE; 2981 } 2982 ret = nsp32_prom_read(data, 0x7f); 2983 if (ret != 0xaa) { 2984 nsp32_msg(KERN_INFO, "Invalid number: 0x%x", ret); 2985 return FALSE; 2986 } 2987 2988 /* 2989 * check EEPROM type 2990 */ 2991 if (vendor == PCI_VENDOR_ID_WORKBIT && 2992 device == PCI_DEVICE_ID_WORKBIT_STANDARD) { 2993 ret = nsp32_getprom_c16(data); 2994 } else if (vendor == PCI_VENDOR_ID_WORKBIT && 2995 device == PCI_DEVICE_ID_NINJASCSI_32BIB_LOGITEC) { 2996 ret = nsp32_getprom_at24(data); 2997 } else if (vendor == PCI_VENDOR_ID_WORKBIT && 2998 device == PCI_DEVICE_ID_NINJASCSI_32UDE_MELCO ) { 2999 ret = nsp32_getprom_at24(data); 3000 } else { 3001 nsp32_msg(KERN_WARNING, "Unknown EEPROM"); 3002 ret = FALSE; 3003 } 3004 3005 /* for debug : SPROM data full checking */ 3006 for (i = 0; i <= 0x1f; i++) { 3007 val = nsp32_prom_read(data, i); 3008 nsp32_dbg(NSP32_DEBUG_EEPROM, 3009 "rom address 0x%x : 0x%x", i, val); 3010 } 3011 3012 return ret; 3013} 3014 3015 3016/* 3017 * AT24C01A (Logitec: LHA-600S), AT24C02 (Melco Buffalo: IFC-USLP) data map: 3018 * 3019 * ROMADDR 3020 * 0x00 - 0x06 : Device Synchronous Transfer Period (SCSI ID 0 - 6) 3021 * Value 0x0: ASYNC, 0x0c: Ultra-20M, 0x19: Fast-10M 3022 * 0x07 : HBA Synchronous Transfer Period 3023 * Value 0: AutoSync, 1: Manual Setting 3024 * 0x08 - 0x0f : Not Used? (0x0) 3025 * 0x10 : Bus Termination 3026 * Value 0: Auto[ON], 1: ON, 2: OFF 3027 * 0x11 : Not Used? (0) 3028 * 0x12 : Bus Reset Delay Time (0x03) 3029 * 0x13 : Bootable CD Support 3030 * Value 0: Disable, 1: Enable 3031 * 0x14 : Device Scan 3032 * Bit 7 6 5 4 3 2 1 0 3033 * | <-----------------> 3034 * | SCSI ID: Value 0: Skip, 1: YES 3035 * |-> Value 0: ALL scan, Value 1: Manual 3036 * 0x15 - 0x1b : Not Used? (0) 3037 * 0x1c : Constant? (0x01) (clock div?) 3038 * 0x1d - 0x7c : Not Used (0xff) 3039 * 0x7d : Not Used? (0xff) 3040 * 0x7e : Constant (0x55), Validity signature 3041 * 0x7f : Constant (0xaa), Validity signature 3042 */ 3043static int nsp32_getprom_at24(nsp32_hw_data *data) 3044{ 3045 int ret, i; 3046 int auto_sync; 3047 nsp32_target *target; 3048 int entry; 3049 3050 /* 3051 * Reset time which is designated by EEPROM. 3052 * 3053 * TODO: Not used yet. 3054 */ 3055 data->resettime = nsp32_prom_read(data, 0x12); 3056 3057 /* 3058 * HBA Synchronous Transfer Period 3059 * 3060 * Note: auto_sync = 0: auto, 1: manual. Ninja SCSI HBA spec says 3061 * that if auto_sync is 0 (auto), and connected SCSI devices are 3062 * same or lower than 3, then transfer speed is set as ULTRA-20M. 3063 * On the contrary if connected SCSI devices are same or higher 3064 * than 4, then transfer speed is set as FAST-10M. 3065 * 3066 * I break this rule. The number of connected SCSI devices are 3067 * only ignored. If auto_sync is 0 (auto), then transfer speed is 3068 * forced as ULTRA-20M. 3069 */ 3070 ret = nsp32_prom_read(data, 0x07); 3071 switch (ret) { 3072 case 0: 3073 auto_sync = TRUE; 3074 break; 3075 case 1: 3076 auto_sync = FALSE; 3077 break; 3078 default: 3079 nsp32_msg(KERN_WARNING, 3080 "Unsupported Auto Sync mode. Fall back to manual mode."); 3081 auto_sync = TRUE; 3082 } 3083 3084 if (trans_mode == ULTRA20M_MODE) { 3085 auto_sync = TRUE; 3086 } 3087 3088 /* 3089 * each device Synchronous Transfer Period 3090 */ 3091 for (i = 0; i < NSP32_HOST_SCSIID; i++) { 3092 target = &data->target[i]; 3093 if (auto_sync == TRUE) { 3094 target->limit_entry = 0; /* set as ULTRA20M */ 3095 } else { 3096 ret = nsp32_prom_read(data, i); 3097 entry = nsp32_search_period_entry(data, target, ret); 3098 if (entry < 0) { 3099 /* search failed... set maximum speed */ 3100 entry = 0; 3101 } 3102 target->limit_entry = entry; 3103 } 3104 } 3105 3106 return TRUE; 3107} 3108 3109 3110/* 3111 * C16 110 (I-O Data: SC-NBD) data map: 3112 * 3113 * ROMADDR 3114 * 0x00 - 0x06 : Device Synchronous Transfer Period (SCSI ID 0 - 6) 3115 * Value 0x0: 20MB/S, 0x1: 10MB/S, 0x2: 5MB/S, 0x3: ASYNC 3116 * 0x07 : 0 (HBA Synchronous Transfer Period: Auto Sync) 3117 * 0x08 - 0x0f : Not Used? (0x0) 3118 * 0x10 : Transfer Mode 3119 * Value 0: PIO, 1: Busmater 3120 * 0x11 : Bus Reset Delay Time (0x00-0x20) 3121 * 0x12 : Bus Termination 3122 * Value 0: Disable, 1: Enable 3123 * 0x13 - 0x19 : Disconnection 3124 * Value 0: Disable, 1: Enable 3125 * 0x1a - 0x7c : Not Used? (0) 3126 * 0x7d : Not Used? (0xf8) 3127 * 0x7e : Constant (0x55), Validity signature 3128 * 0x7f : Constant (0xaa), Validity signature 3129 */ 3130static int nsp32_getprom_c16(nsp32_hw_data *data) 3131{ 3132 int ret, i; 3133 nsp32_target *target; 3134 int entry, val; 3135 3136 /* 3137 * Reset time which is designated by EEPROM. 3138 * 3139 * TODO: Not used yet. 3140 */ 3141 data->resettime = nsp32_prom_read(data, 0x11); 3142 3143 /* 3144 * each device Synchronous Transfer Period 3145 */ 3146 for (i = 0; i < NSP32_HOST_SCSIID; i++) { 3147 target = &data->target[i]; 3148 ret = nsp32_prom_read(data, i); 3149 switch (ret) { 3150 case 0: /* 20MB/s */ 3151 val = 0x0c; 3152 break; 3153 case 1: /* 10MB/s */ 3154 val = 0x19; 3155 break; 3156 case 2: /* 5MB/s */ 3157 val = 0x32; 3158 break; 3159 case 3: /* ASYNC */ 3160 val = 0x00; 3161 break; 3162 default: /* default 20MB/s */ 3163 val = 0x0c; 3164 break; 3165 } 3166 entry = nsp32_search_period_entry(data, target, val); 3167 if (entry < 0 || trans_mode == ULTRA20M_MODE) { 3168 /* search failed... set maximum speed */ 3169 entry = 0; 3170 } 3171 target->limit_entry = entry; 3172 } 3173 3174 return TRUE; 3175} 3176 3177 3178/* 3179 * Atmel AT24C01A (drived in 5V) serial EEPROM routines 3180 */ 3181static int nsp32_prom_read(nsp32_hw_data *data, int romaddr) 3182{ 3183 int i, val; 3184 3185 /* start condition */ 3186 nsp32_prom_start(data); 3187 3188 /* device address */ 3189 nsp32_prom_write_bit(data, 1); /* 1 */ 3190 nsp32_prom_write_bit(data, 0); /* 0 */ 3191 nsp32_prom_write_bit(data, 1); /* 1 */ 3192 nsp32_prom_write_bit(data, 0); /* 0 */ 3193 nsp32_prom_write_bit(data, 0); /* A2: 0 (GND) */ 3194 nsp32_prom_write_bit(data, 0); /* A1: 0 (GND) */ 3195 nsp32_prom_write_bit(data, 0); /* A0: 0 (GND) */ 3196 3197 /* R/W: W for dummy write */ 3198 nsp32_prom_write_bit(data, 0); 3199 3200 /* ack */ 3201 nsp32_prom_write_bit(data, 0); 3202 3203 /* word address */ 3204 for (i = 7; i >= 0; i--) { 3205 nsp32_prom_write_bit(data, ((romaddr >> i) & 1)); 3206 } 3207 3208 /* ack */ 3209 nsp32_prom_write_bit(data, 0); 3210 3211 /* start condition */ 3212 nsp32_prom_start(data); 3213 3214 /* device address */ 3215 nsp32_prom_write_bit(data, 1); /* 1 */ 3216 nsp32_prom_write_bit(data, 0); /* 0 */ 3217 nsp32_prom_write_bit(data, 1); /* 1 */ 3218 nsp32_prom_write_bit(data, 0); /* 0 */ 3219 nsp32_prom_write_bit(data, 0); /* A2: 0 (GND) */ 3220 nsp32_prom_write_bit(data, 0); /* A1: 0 (GND) */ 3221 nsp32_prom_write_bit(data, 0); /* A0: 0 (GND) */ 3222 3223 /* R/W: R */ 3224 nsp32_prom_write_bit(data, 1); 3225 3226 /* ack */ 3227 nsp32_prom_write_bit(data, 0); 3228 3229 /* data... */ 3230 val = 0; 3231 for (i = 7; i >= 0; i--) { 3232 val += (nsp32_prom_read_bit(data) << i); 3233 } 3234 3235 /* no ack */ 3236 nsp32_prom_write_bit(data, 1); 3237 3238 /* stop condition */ 3239 nsp32_prom_stop(data); 3240 3241 return val; 3242} 3243 3244static void nsp32_prom_set(nsp32_hw_data *data, int bit, int val) 3245{ 3246 int base = data->BaseAddress; 3247 int tmp; 3248 3249 tmp = nsp32_index_read1(base, SERIAL_ROM_CTL); 3250 3251 if (val == 0) { 3252 tmp &= ~bit; 3253 } else { 3254 tmp |= bit; 3255 } 3256 3257 nsp32_index_write1(base, SERIAL_ROM_CTL, tmp); 3258 3259 udelay(10); 3260} 3261 3262static int nsp32_prom_get(nsp32_hw_data *data, int bit) 3263{ 3264 int base = data->BaseAddress; 3265 int tmp, ret; 3266 3267 if (bit != SDA) { 3268 nsp32_msg(KERN_ERR, "return value is not appropriate"); 3269 return 0; 3270 } 3271 3272 3273 tmp = nsp32_index_read1(base, SERIAL_ROM_CTL) & bit; 3274 3275 if (tmp == 0) { 3276 ret = 0; 3277 } else { 3278 ret = 1; 3279 } 3280 3281 udelay(10); 3282 3283 return ret; 3284} 3285 3286static void nsp32_prom_start (nsp32_hw_data *data) 3287{ 3288 /* start condition */ 3289 nsp32_prom_set(data, SCL, 1); 3290 nsp32_prom_set(data, SDA, 1); 3291 nsp32_prom_set(data, ENA, 1); /* output mode */ 3292 nsp32_prom_set(data, SDA, 0); /* keeping SCL=1 and transiting 3293 * SDA 1->0 is start condition */ 3294 nsp32_prom_set(data, SCL, 0); 3295} 3296 3297static void nsp32_prom_stop (nsp32_hw_data *data) 3298{ 3299 /* stop condition */ 3300 nsp32_prom_set(data, SCL, 1); 3301 nsp32_prom_set(data, SDA, 0); 3302 nsp32_prom_set(data, ENA, 1); /* output mode */ 3303 nsp32_prom_set(data, SDA, 1); 3304 nsp32_prom_set(data, SCL, 0); 3305} 3306 3307static void nsp32_prom_write_bit(nsp32_hw_data *data, int val) 3308{ 3309 /* write */ 3310 nsp32_prom_set(data, SDA, val); 3311 nsp32_prom_set(data, SCL, 1 ); 3312 nsp32_prom_set(data, SCL, 0 ); 3313} 3314 3315static int nsp32_prom_read_bit(nsp32_hw_data *data) 3316{ 3317 int val; 3318 3319 /* read */ 3320 nsp32_prom_set(data, ENA, 0); /* input mode */ 3321 nsp32_prom_set(data, SCL, 1); 3322 3323 val = nsp32_prom_get(data, SDA); 3324 3325 nsp32_prom_set(data, SCL, 0); 3326 nsp32_prom_set(data, ENA, 1); /* output mode */ 3327 3328 return val; 3329} 3330 3331 3332/************************************************************************** 3333 * Power Management 3334 */ 3335#ifdef CONFIG_PM 3336 3337/* Device suspended */ 3338static int nsp32_suspend(struct pci_dev *pdev, pm_message_t state) 3339{ 3340 struct Scsi_Host *host = pci_get_drvdata(pdev); 3341 3342 nsp32_msg(KERN_INFO, "pci-suspend: pdev=0x%p, state=%ld, slot=%s, host=0x%p", pdev, state, pci_name(pdev), host); 3343 3344 pci_save_state (pdev); 3345 pci_disable_device (pdev); 3346 pci_set_power_state(pdev, pci_choose_state(pdev, state)); 3347 3348 return 0; 3349} 3350 3351/* Device woken up */ 3352static int nsp32_resume(struct pci_dev *pdev) 3353{ 3354 struct Scsi_Host *host = pci_get_drvdata(pdev); 3355 nsp32_hw_data *data = (nsp32_hw_data *)host->hostdata; 3356 unsigned short reg; 3357 3358 nsp32_msg(KERN_INFO, "pci-resume: pdev=0x%p, slot=%s, host=0x%p", pdev, pci_name(pdev), host); 3359 3360 pci_set_power_state(pdev, PCI_D0); 3361 pci_enable_wake (pdev, PCI_D0, 0); 3362 pci_restore_state (pdev); 3363 3364 reg = nsp32_read2(data->BaseAddress, INDEX_REG); 3365 3366 nsp32_msg(KERN_INFO, "io=0x%x reg=0x%x", data->BaseAddress, reg); 3367 3368 if (reg == 0xffff) { 3369 nsp32_msg(KERN_INFO, "missing device. abort resume."); 3370 return 0; 3371 } 3372 3373 nsp32hw_init (data); 3374 nsp32_do_bus_reset(data); 3375 3376 nsp32_msg(KERN_INFO, "resume success"); 3377 3378 return 0; 3379} 3380 3381#endif 3382 3383/************************************************************************ 3384 * PCI/Cardbus probe/remove routine 3385 */ 3386static int __devinit nsp32_probe(struct pci_dev *pdev, const struct pci_device_id *id) 3387{ 3388 int ret; 3389 nsp32_hw_data *data = &nsp32_data_base; 3390 3391 nsp32_dbg(NSP32_DEBUG_REGISTER, "enter"); 3392 3393 ret = pci_enable_device(pdev); 3394 if (ret) { 3395 nsp32_msg(KERN_ERR, "failed to enable pci device"); 3396 return ret; 3397 } 3398 3399 data->Pci = pdev; 3400 data->pci_devid = id; 3401 data->IrqNumber = pdev->irq; 3402 data->BaseAddress = pci_resource_start(pdev, 0); 3403 data->NumAddress = pci_resource_len (pdev, 0); 3404 data->MmioAddress = pci_ioremap_bar(pdev, 1); 3405 data->MmioLength = pci_resource_len (pdev, 1); 3406 3407 pci_set_master(pdev); 3408 3409 ret = nsp32_detect(pdev); 3410 3411 nsp32_msg(KERN_INFO, "irq: %i mmio: %p+0x%lx slot: %s model: %s", 3412 pdev->irq, 3413 data->MmioAddress, data->MmioLength, 3414 pci_name(pdev), 3415 nsp32_model[id->driver_data]); 3416 3417 nsp32_dbg(NSP32_DEBUG_REGISTER, "exit %d", ret); 3418 3419 return ret; 3420} 3421 3422static void __devexit nsp32_remove(struct pci_dev *pdev) 3423{ 3424 struct Scsi_Host *host = pci_get_drvdata(pdev); 3425 3426 nsp32_dbg(NSP32_DEBUG_REGISTER, "enter"); 3427 3428 scsi_remove_host(host); 3429 3430 nsp32_release(host); 3431 3432 scsi_host_put(host); 3433} 3434 3435static struct pci_driver nsp32_driver = { 3436 .name = "nsp32", 3437 .id_table = nsp32_pci_table, 3438 .probe = nsp32_probe, 3439 .remove = __devexit_p(nsp32_remove), 3440#ifdef CONFIG_PM 3441 .suspend = nsp32_suspend, 3442 .resume = nsp32_resume, 3443#endif 3444}; 3445 3446/********************************************************************* 3447 * Moule entry point 3448 */ 3449static int __init init_nsp32(void) { 3450 nsp32_msg(KERN_INFO, "loading..."); 3451 return pci_register_driver(&nsp32_driver); 3452} 3453 3454static void __exit exit_nsp32(void) { 3455 nsp32_msg(KERN_INFO, "unloading..."); 3456 pci_unregister_driver(&nsp32_driver); 3457} 3458 3459module_init(init_nsp32); 3460module_exit(exit_nsp32); 3461 3462/* end */ 3463