1#ifndef TARGET_PARAMS_H
2#define TARGET_PARAMS_H
3
4struct bcm_target_params {
5	u32 m_u32CfgVersion;
6	u32 m_u32CenterFrequency;
7	u32 m_u32BandAScan;
8	u32 m_u32BandBScan;
9	u32 m_u32BandCScan;
10	u32 m_u32ErtpsOptions;
11	u32 m_u32PHSEnable;
12	u32 m_u32HoEnable;
13	u32 m_u32HoReserved1;
14	u32 m_u32HoReserved2;
15	u32 m_u32MimoEnable;
16	u32 m_u32SecurityEnable;
17	u32 m_u32PowerSavingModesEnable; /* bit 1: 1 Idlemode enable; bit2: 1 Sleepmode Enable */
18	/* PowerSaving Mode Options:
19	 * bit 0 = 1: CPE mode - to keep pcmcia if alive;
20	 * bit 1 = 1: CINR reporting in Idlemode Msg
21	 * bit 2 = 1: Default PSC Enable in sleepmode
22	 */
23	u32 m_u32PowerSavingModeOptions;
24	u32 m_u32ArqEnable;
25	/* From Version #3, the HARQ section renamed as general */
26	u32 m_u32HarqEnable;
27	u32 m_u32EEPROMFlag;
28	/* BINARY TYPE - 4th MSByte: Interface Type -  3rd MSByte: Vendor Type - 2nd MSByte
29	 * Unused - LSByte
30	 */
31	u32 m_u32Customize;
32	u32 m_u32ConfigBW;  /* In Hz */
33	u32 m_u32ShutDownInitThresholdTimer;
34	u32 m_u32RadioParameter;
35	u32 m_u32PhyParameter1;
36	u32 m_u32PhyParameter2;
37	u32 m_u32PhyParameter3;
38	u32 m_u32TestOptions; /* in eval mode only; lower 16bits = basic cid for testing; then bit 16 is test cqich,bit 17  test init rang; bit 18 test periodic rang and bit 19 is test harq ack/nack */
39	u32 m_u32MaxMACDataperDLFrame;
40	u32 m_u32MaxMACDataperULFrame;
41	u32 m_u32Corr2MacFlags;
42	u32 HostDrvrConfig1;
43	u32 HostDrvrConfig2;
44	u32 HostDrvrConfig3;
45	u32 HostDrvrConfig4;
46	u32 HostDrvrConfig5;
47	u32 HostDrvrConfig6;
48	u32 m_u32SegmentedPUSCenable;
49	/* removed SHUT down related 'unused' params from here to sync 4.x and 5.x CFG files..
50	 * BAMC Related Parameters
51	 * Bit 0-15 Band AMC signaling configuration: Bit 1 = 1  Enable Band AMC signaling.
52	 * bit 16-31 Band AMC Data configuration: Bit 16 = 1  Band AMC 2x3 support.
53	 */
54	u32 m_u32BandAMCEnable;
55};
56
57#endif
58