amplc_pc236.c revision a2714e3e42e746d6c8525c35fdcc58fb60c2830d
1/* 2 comedi/drivers/amplc_pc236.c 3 Driver for Amplicon PC36AT and PCI236 DIO boards. 4 5 Copyright (C) 2002 MEV Ltd. <http://www.mev.co.uk/> 6 7 COMEDI - Linux Control and Measurement Device Interface 8 Copyright (C) 2000 David A. Schleef <ds@schleef.org> 9 10 This program is free software; you can redistribute it and/or modify 11 it under the terms of the GNU General Public License as published by 12 the Free Software Foundation; either version 2 of the License, or 13 (at your option) any later version. 14 15 This program is distributed in the hope that it will be useful, 16 but WITHOUT ANY WARRANTY; without even the implied warranty of 17 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 18 GNU General Public License for more details. 19 20 You should have received a copy of the GNU General Public License 21 along with this program; if not, write to the Free Software 22 Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. 23 24*/ 25/* 26Driver: amplc_pc236 27Description: Amplicon PC36AT, PCI236 28Author: Ian Abbott <abbotti@mev.co.uk> 29Devices: [Amplicon] PC36AT (pc36at), PCI236 (pci236 or amplc_pc236) 30Updated: Wed, 01 Apr 2009 15:41:25 +0100 31Status: works 32 33Configuration options - PC36AT: 34 [0] - I/O port base address 35 [1] - IRQ (optional) 36 37Configuration options - PCI236: 38 [0] - PCI bus of device (optional) 39 [1] - PCI slot of device (optional) 40 If bus/slot is not specified, the first available PCI device will be 41 used. 42 43The PC36AT ISA board and PCI236 PCI board have a single 8255 appearing 44as subdevice 0. 45 46Subdevice 1 pretends to be a digital input device, but it always returns 470 when read. However, if you run a command with scan_begin_src=TRIG_EXT, 48a rising edge on port C bit 3 acts as an external trigger, which can be 49used to wake up tasks. This is like the comedi_parport device, but the 50only way to physically disable the interrupt on the PC36AT is to remove 51the IRQ jumper. If no interrupt is connected, then subdevice 1 is 52unused. 53*/ 54 55#include <linux/interrupt.h> 56 57#include "../comedidev.h" 58 59#include "8255.h" 60#include "plx9052.h" 61 62#define PC236_DRIVER_NAME "amplc_pc236" 63 64/* PCI236 PCI configuration register information */ 65#define PCI_VENDOR_ID_AMPLICON 0x14dc 66#define PCI_DEVICE_ID_AMPLICON_PCI236 0x0009 67#define PCI_DEVICE_ID_INVALID 0xffff 68 69/* PC36AT / PCI236 registers */ 70 71#define PC236_IO_SIZE 4 72#define PC236_LCR_IO_SIZE 128 73 74/* 75 * INTCSR values for PCI236. 76 */ 77/* Disable interrupt, also clear any interrupt there */ 78#define PCI236_INTR_DISABLE (PLX9052_INTCSR_LI1ENAB_DISABLED \ 79 | PLX9052_INTCSR_LI1POL_HIGH \ 80 | PLX9052_INTCSR_LI2POL_HIGH \ 81 | PLX9052_INTCSR_PCIENAB_DISABLED \ 82 | PLX9052_INTCSR_LI1SEL_EDGE \ 83 | PLX9052_INTCSR_LI1CLRINT_ASSERTED) 84/* Enable interrupt, also clear any interrupt there. */ 85#define PCI236_INTR_ENABLE (PLX9052_INTCSR_LI1ENAB_ENABLED \ 86 | PLX9052_INTCSR_LI1POL_HIGH \ 87 | PLX9052_INTCSR_LI2POL_HIGH \ 88 | PLX9052_INTCSR_PCIENAB_ENABLED \ 89 | PLX9052_INTCSR_LI1SEL_EDGE \ 90 | PLX9052_INTCSR_LI1CLRINT_ASSERTED) 91 92/* 93 * Board descriptions for Amplicon PC36AT and PCI236. 94 */ 95 96enum pc236_bustype { isa_bustype, pci_bustype }; 97enum pc236_model { pc36at_model, pci236_model, anypci_model }; 98 99struct pc236_board { 100 const char *name; 101 unsigned short devid; 102 enum pc236_bustype bustype; 103 enum pc236_model model; 104}; 105static const struct pc236_board pc236_boards[] = { 106#if IS_ENABLED(CONFIG_COMEDI_AMPLC_PC236_ISA) 107 { 108 .name = "pc36at", 109 .bustype = isa_bustype, 110 .model = pc36at_model, 111 }, 112#endif 113#if IS_ENABLED(CONFIG_COMEDI_AMPLC_PC236_PCI) 114 { 115 .name = "pci236", 116 .devid = PCI_DEVICE_ID_AMPLICON_PCI236, 117 .bustype = pci_bustype, 118 .model = pci236_model, 119 }, 120 { 121 .name = PC236_DRIVER_NAME, 122 .devid = PCI_DEVICE_ID_INVALID, 123 .bustype = pci_bustype, 124 .model = anypci_model, /* wildcard */ 125 }, 126#endif 127}; 128 129/* this structure is for data unique to this hardware driver. If 130 several hardware drivers keep similar information in this structure, 131 feel free to suggest moving the variable to the struct comedi_device struct. 132 */ 133struct pc236_private { 134 /* PCI device */ 135 struct pci_dev *pci_dev; 136 unsigned long lcr_iobase; /* PLX PCI9052 config registers in PCIBAR1 */ 137 int enable_irq; 138}; 139 140/* 141 * This function looks for a board matching the supplied PCI device. 142 */ 143static const struct pc236_board *pc236_find_pci_board(struct pci_dev *pci_dev) 144{ 145 unsigned int i; 146 147 for (i = 0; i < ARRAY_SIZE(pc236_boards); i++) 148 if (pc236_boards[i].bustype == pci_bustype && 149 pci_dev->device == pc236_boards[i].devid) 150 return &pc236_boards[i]; 151 return NULL; 152} 153 154/* 155 * This function looks for a PCI device matching the requested board name, 156 * bus and slot. 157 */ 158static struct pci_dev * 159pc236_find_pci(struct comedi_device *dev, int bus, int slot) 160{ 161 const struct pc236_board *thisboard = comedi_board(dev); 162 struct pci_dev *pci_dev = NULL; 163 164 /* Look for matching PCI device. */ 165 for (pci_dev = pci_get_device(PCI_VENDOR_ID_AMPLICON, PCI_ANY_ID, NULL); 166 pci_dev != NULL; 167 pci_dev = pci_get_device(PCI_VENDOR_ID_AMPLICON, 168 PCI_ANY_ID, pci_dev)) { 169 /* If bus/slot specified, check them. */ 170 if (bus || slot) { 171 if (bus != pci_dev->bus->number 172 || slot != PCI_SLOT(pci_dev->devfn)) 173 continue; 174 } 175 if (thisboard->model == anypci_model) { 176 /* Wildcard board matches any supported PCI board. */ 177 const struct pc236_board *foundboard; 178 foundboard = pc236_find_pci_board(pci_dev); 179 if (foundboard == NULL) 180 continue; 181 /* Replace wildcard board_ptr. */ 182 dev->board_ptr = thisboard = foundboard; 183 } else { 184 /* Match specific model name. */ 185 if (pci_dev->device != thisboard->devid) 186 continue; 187 } 188 189 /* Found a match. */ 190 return pci_dev; 191 } 192 /* No match found. */ 193 if (bus || slot) { 194 dev_err(dev->class_dev, 195 "error! no %s found at pci %02x:%02x!\n", 196 thisboard->name, bus, slot); 197 } else { 198 dev_err(dev->class_dev, "error! no %s found!\n", 199 thisboard->name); 200 } 201 return NULL; 202} 203 204/* 205 * This function checks and requests an I/O region, reporting an error 206 * if there is a conflict. 207 */ 208static int pc236_request_region(struct comedi_device *dev, unsigned long from, 209 unsigned long extent) 210{ 211 if (!from || !request_region(from, extent, PC236_DRIVER_NAME)) { 212 dev_err(dev->class_dev, "I/O port conflict (%#lx,%lu)!\n", 213 from, extent); 214 return -EIO; 215 } 216 return 0; 217} 218 219/* 220 * This function is called to mark the interrupt as disabled (no command 221 * configured on subdevice 1) and to physically disable the interrupt 222 * (not possible on the PC36AT, except by removing the IRQ jumper!). 223 */ 224static void pc236_intr_disable(struct comedi_device *dev) 225{ 226 struct pc236_private *devpriv = dev->private; 227 unsigned long flags; 228 229 spin_lock_irqsave(&dev->spinlock, flags); 230 devpriv->enable_irq = 0; 231 if (IS_ENABLED(CONFIG_COMEDI_AMPLC_PC236_PCI) && devpriv->lcr_iobase) 232 outl(PCI236_INTR_DISABLE, devpriv->lcr_iobase + PLX9052_INTCSR); 233 spin_unlock_irqrestore(&dev->spinlock, flags); 234} 235 236/* 237 * This function is called to mark the interrupt as enabled (a command 238 * configured on subdevice 1) and to physically enable the interrupt 239 * (not possible on the PC36AT, except by (re)connecting the IRQ jumper!). 240 */ 241static void pc236_intr_enable(struct comedi_device *dev) 242{ 243 struct pc236_private *devpriv = dev->private; 244 unsigned long flags; 245 246 spin_lock_irqsave(&dev->spinlock, flags); 247 devpriv->enable_irq = 1; 248 if (IS_ENABLED(CONFIG_COMEDI_AMPLC_PC236_PCI) && devpriv->lcr_iobase) 249 outl(PCI236_INTR_ENABLE, devpriv->lcr_iobase + PLX9052_INTCSR); 250 spin_unlock_irqrestore(&dev->spinlock, flags); 251} 252 253/* 254 * This function is called when an interrupt occurs to check whether 255 * the interrupt has been marked as enabled and was generated by the 256 * board. If so, the function prepares the hardware for the next 257 * interrupt. 258 * Returns 0 if the interrupt should be ignored. 259 */ 260static int pc236_intr_check(struct comedi_device *dev) 261{ 262 struct pc236_private *devpriv = dev->private; 263 int retval = 0; 264 unsigned long flags; 265 266 spin_lock_irqsave(&dev->spinlock, flags); 267 if (devpriv->enable_irq) { 268 retval = 1; 269 if (IS_ENABLED(CONFIG_COMEDI_AMPLC_PC236_PCI) && 270 devpriv->lcr_iobase) { 271 if ((inl(devpriv->lcr_iobase + PLX9052_INTCSR) 272 & PLX9052_INTCSR_LI1STAT_MASK) 273 == PLX9052_INTCSR_LI1STAT_INACTIVE) { 274 retval = 0; 275 } else { 276 /* Clear interrupt and keep it enabled. */ 277 outl(PCI236_INTR_ENABLE, 278 devpriv->lcr_iobase + PLX9052_INTCSR); 279 } 280 } 281 } 282 spin_unlock_irqrestore(&dev->spinlock, flags); 283 284 return retval; 285} 286 287/* 288 * Input from subdevice 1. 289 * Copied from the comedi_parport driver. 290 */ 291static int pc236_intr_insn(struct comedi_device *dev, 292 struct comedi_subdevice *s, struct comedi_insn *insn, 293 unsigned int *data) 294{ 295 data[1] = 0; 296 return insn->n; 297} 298 299/* 300 * Subdevice 1 command test. 301 * Copied from the comedi_parport driver. 302 */ 303static int pc236_intr_cmdtest(struct comedi_device *dev, 304 struct comedi_subdevice *s, 305 struct comedi_cmd *cmd) 306{ 307 int err = 0; 308 int tmp; 309 310 /* step 1 */ 311 312 tmp = cmd->start_src; 313 cmd->start_src &= TRIG_NOW; 314 if (!cmd->start_src || tmp != cmd->start_src) 315 err++; 316 317 tmp = cmd->scan_begin_src; 318 cmd->scan_begin_src &= TRIG_EXT; 319 if (!cmd->scan_begin_src || tmp != cmd->scan_begin_src) 320 err++; 321 322 tmp = cmd->convert_src; 323 cmd->convert_src &= TRIG_FOLLOW; 324 if (!cmd->convert_src || tmp != cmd->convert_src) 325 err++; 326 327 tmp = cmd->scan_end_src; 328 cmd->scan_end_src &= TRIG_COUNT; 329 if (!cmd->scan_end_src || tmp != cmd->scan_end_src) 330 err++; 331 332 tmp = cmd->stop_src; 333 cmd->stop_src &= TRIG_NONE; 334 if (!cmd->stop_src || tmp != cmd->stop_src) 335 err++; 336 337 if (err) 338 return 1; 339 340 /* step 2: ignored */ 341 342 if (err) 343 return 2; 344 345 /* step 3: */ 346 347 if (cmd->start_arg != 0) { 348 cmd->start_arg = 0; 349 err++; 350 } 351 if (cmd->scan_begin_arg != 0) { 352 cmd->scan_begin_arg = 0; 353 err++; 354 } 355 if (cmd->convert_arg != 0) { 356 cmd->convert_arg = 0; 357 err++; 358 } 359 if (cmd->scan_end_arg != 1) { 360 cmd->scan_end_arg = 1; 361 err++; 362 } 363 if (cmd->stop_arg != 0) { 364 cmd->stop_arg = 0; 365 err++; 366 } 367 368 if (err) 369 return 3; 370 371 /* step 4: ignored */ 372 373 if (err) 374 return 4; 375 376 return 0; 377} 378 379/* 380 * Subdevice 1 command. 381 */ 382static int pc236_intr_cmd(struct comedi_device *dev, struct comedi_subdevice *s) 383{ 384 pc236_intr_enable(dev); 385 386 return 0; 387} 388 389/* 390 * Subdevice 1 cancel command. 391 */ 392static int pc236_intr_cancel(struct comedi_device *dev, 393 struct comedi_subdevice *s) 394{ 395 pc236_intr_disable(dev); 396 397 return 0; 398} 399 400/* 401 * Interrupt service routine. 402 * Based on the comedi_parport driver. 403 */ 404static irqreturn_t pc236_interrupt(int irq, void *d) 405{ 406 struct comedi_device *dev = d; 407 struct comedi_subdevice *s = dev->subdevices + 1; 408 int handled; 409 410 handled = pc236_intr_check(dev); 411 if (dev->attached && handled) { 412 comedi_buf_put(s->async, 0); 413 s->async->events |= COMEDI_CB_BLOCK | COMEDI_CB_EOS; 414 comedi_event(dev, s); 415 } 416 return IRQ_RETVAL(handled); 417} 418 419static void pc236_report_attach(struct comedi_device *dev, unsigned int irq) 420{ 421 const struct pc236_board *thisboard = comedi_board(dev); 422 char tmpbuf[60]; 423 int tmplen; 424 425 if (IS_ENABLED(CONFIG_COMEDI_AMPLC_PC236_ISA) && 426 thisboard->bustype == isa_bustype) 427 tmplen = scnprintf(tmpbuf, sizeof(tmpbuf), 428 "(base %#lx) ", dev->iobase); 429 else if (IS_ENABLED(CONFIG_COMEDI_AMPLC_PC236_PCI) && 430 thisboard->bustype == pci_bustype) { 431 struct pc236_private *devpriv = dev->private; 432 struct pci_dev *pci_dev = devpriv->pci_dev; 433 tmplen = scnprintf(tmpbuf, sizeof(tmpbuf), 434 "(pci %s) ", pci_name(pci_dev)); 435 } else 436 tmplen = 0; 437 if (irq) 438 tmplen += scnprintf(&tmpbuf[tmplen], sizeof(tmpbuf) - tmplen, 439 "(irq %u%s) ", irq, 440 (dev->irq ? "" : " UNAVAILABLE")); 441 else 442 tmplen += scnprintf(&tmpbuf[tmplen], sizeof(tmpbuf) - tmplen, 443 "(no irq) "); 444 dev_info(dev->class_dev, "%s %sattached\n", 445 dev->board_name, tmpbuf); 446} 447 448static int pc236_common_attach(struct comedi_device *dev, unsigned long iobase, 449 unsigned int irq, unsigned long req_irq_flags) 450{ 451 const struct pc236_board *thisboard = comedi_board(dev); 452 struct comedi_subdevice *s; 453 int ret; 454 455 dev->board_name = thisboard->name; 456 dev->iobase = iobase; 457 458 ret = comedi_alloc_subdevices(dev, 2); 459 if (ret) 460 return ret; 461 462 s = dev->subdevices + 0; 463 /* digital i/o subdevice (8255) */ 464 ret = subdev_8255_init(dev, s, NULL, iobase); 465 if (ret < 0) { 466 dev_err(dev->class_dev, "error! out of memory!\n"); 467 return ret; 468 } 469 s = dev->subdevices + 1; 470 dev->read_subdev = s; 471 s->type = COMEDI_SUBD_UNUSED; 472 pc236_intr_disable(dev); 473 if (irq) { 474 if (request_irq(irq, pc236_interrupt, req_irq_flags, 475 PC236_DRIVER_NAME, dev) >= 0) { 476 dev->irq = irq; 477 s->type = COMEDI_SUBD_DI; 478 s->subdev_flags = SDF_READABLE | SDF_CMD_READ; 479 s->n_chan = 1; 480 s->maxdata = 1; 481 s->range_table = &range_digital; 482 s->insn_bits = pc236_intr_insn; 483 s->do_cmdtest = pc236_intr_cmdtest; 484 s->do_cmd = pc236_intr_cmd; 485 s->cancel = pc236_intr_cancel; 486 } 487 } 488 pc236_report_attach(dev, irq); 489 return 1; 490} 491 492static int pc236_pci_common_attach(struct comedi_device *dev, 493 struct pci_dev *pci_dev) 494{ 495 struct pc236_private *devpriv = dev->private; 496 unsigned long iobase; 497 int ret; 498 499 devpriv->pci_dev = pci_dev; 500 ret = comedi_pci_enable(pci_dev, PC236_DRIVER_NAME); 501 if (ret < 0) { 502 dev_err(dev->class_dev, 503 "error! cannot enable PCI device and request regions!\n"); 504 return ret; 505 } 506 devpriv->lcr_iobase = pci_resource_start(pci_dev, 1); 507 iobase = pci_resource_start(pci_dev, 2); 508 return pc236_common_attach(dev, iobase, pci_dev->irq, IRQF_SHARED); 509} 510 511/* 512 * Attach is called by the Comedi core to configure the driver 513 * for a particular board. If you specified a board_name array 514 * in the driver structure, dev->board_ptr contains that 515 * address. 516 */ 517static int pc236_attach(struct comedi_device *dev, struct comedi_devconfig *it) 518{ 519 const struct pc236_board *thisboard = comedi_board(dev); 520 int ret; 521 522 dev_info(dev->class_dev, PC236_DRIVER_NAME ": attach\n"); 523 ret = alloc_private(dev, sizeof(struct pc236_private)); 524 if (ret < 0) { 525 dev_err(dev->class_dev, "error! out of memory!\n"); 526 return ret; 527 } 528 /* Process options according to bus type. */ 529 if (IS_ENABLED(CONFIG_COMEDI_AMPLC_PC236_ISA) && 530 thisboard->bustype == isa_bustype) { 531 unsigned long iobase = it->options[0]; 532 unsigned int irq = it->options[1]; 533 ret = pc236_request_region(dev, iobase, PC236_IO_SIZE); 534 if (ret < 0) 535 return ret; 536 return pc236_common_attach(dev, iobase, irq, 0); 537 } else if (IS_ENABLED(CONFIG_COMEDI_AMPLC_PC236_PCI) && 538 thisboard->bustype == pci_bustype) { 539 int bus = it->options[0]; 540 int slot = it->options[1]; 541 struct pci_dev *pci_dev; 542 543 pci_dev = pc236_find_pci(dev, bus, slot); 544 if (pci_dev == NULL) 545 return -EIO; 546 return pc236_pci_common_attach(dev, pci_dev); 547 } else { 548 dev_err(dev->class_dev, PC236_DRIVER_NAME 549 ": BUG! cannot determine board type!\n"); 550 return -EINVAL; 551 } 552} 553 554/* 555 * The attach_pci hook (if non-NULL) is called at PCI probe time in preference 556 * to the "manual" attach hook. dev->board_ptr is NULL on entry. There should 557 * be a board entry matching the supplied PCI device. 558 */ 559static int __devinit pc236_attach_pci(struct comedi_device *dev, 560 struct pci_dev *pci_dev) 561{ 562 int ret; 563 564 if (!IS_ENABLED(CONFIG_COMEDI_AMPLC_PC236_PCI)) 565 return -EINVAL; 566 567 dev_info(dev->class_dev, PC236_DRIVER_NAME ": attach pci %s\n", 568 pci_name(pci_dev)); 569 ret = alloc_private(dev, sizeof(struct pc236_private)); 570 if (ret < 0) { 571 dev_err(dev->class_dev, "error! out of memory!\n"); 572 return ret; 573 } 574 dev->board_ptr = pc236_find_pci_board(pci_dev); 575 if (dev->board_ptr == NULL) { 576 dev_err(dev->class_dev, "BUG! cannot determine board type!\n"); 577 return -EINVAL; 578 } 579 return pc236_pci_common_attach(dev, pci_dev); 580} 581 582static void pc236_detach(struct comedi_device *dev) 583{ 584 struct pc236_private *devpriv = dev->private; 585 586 if (devpriv) 587 pc236_intr_disable(dev); 588 if (dev->irq) 589 free_irq(dev->irq, dev); 590 if (dev->subdevices) 591 subdev_8255_cleanup(dev, dev->subdevices + 0); 592 if (devpriv) { 593 if (IS_ENABLED(CONFIG_COMEDI_AMPLC_PC236_PCI) && 594 devpriv->pci_dev) { 595 if (dev->iobase) 596 comedi_pci_disable(devpriv->pci_dev); 597 pci_dev_put(devpriv->pci_dev); 598 } else if (IS_ENABLED(CONFIG_COMEDI_AMPLC_PC236_ISA)) { 599 if (dev->iobase) 600 release_region(dev->iobase, PC236_IO_SIZE); 601 } 602 } 603} 604 605/* 606 * The struct comedi_driver structure tells the Comedi core module 607 * which functions to call to configure/deconfigure (attach/detach) 608 * the board, and also about the kernel module that contains 609 * the device code. 610 */ 611static struct comedi_driver amplc_pc236_driver = { 612 .driver_name = PC236_DRIVER_NAME, 613 .module = THIS_MODULE, 614 .attach = pc236_attach, 615 .attach_pci = pc236_attach_pci, 616 .detach = pc236_detach, 617 .board_name = &pc236_boards[0].name, 618 .offset = sizeof(struct pc236_board), 619 .num_names = ARRAY_SIZE(pc236_boards), 620}; 621 622#if IS_ENABLED(CONFIG_COMEDI_AMPLC_PC236_PCI) 623static DEFINE_PCI_DEVICE_TABLE(pc236_pci_table) = { 624 { PCI_DEVICE(PCI_VENDOR_ID_AMPLICON, PCI_DEVICE_ID_AMPLICON_PCI236) }, 625 {0} 626}; 627 628MODULE_DEVICE_TABLE(pci, pc236_pci_table); 629 630static int __devinit amplc_pc236_pci_probe(struct pci_dev *dev, 631 const struct pci_device_id *ent) 632{ 633 return comedi_pci_auto_config(dev, &lc_pc236_driver); 634} 635 636static void __devexit amplc_pc236_pci_remove(struct pci_dev *dev) 637{ 638 comedi_pci_auto_unconfig(dev); 639} 640 641static struct pci_driver amplc_pc236_pci_driver = { 642 .name = PC236_DRIVER_NAME, 643 .id_table = pc236_pci_table, 644 .probe = &lc_pc236_pci_probe, 645 .remove = __devexit_p(&lc_pc236_pci_remove) 646}; 647 648module_comedi_pci_driver(amplc_pc236_driver, amplc_pc236_pci_driver); 649#else 650module_comedi_driver(amplc_pc236_driver); 651#endif 652 653MODULE_AUTHOR("Comedi http://www.comedi.org"); 654MODULE_DESCRIPTION("Comedi low-level driver"); 655MODULE_LICENSE("GPL"); 656