cb_pcidas.c revision 90f703d30dd3e0c16ff80f35e34e511385a05ad5
1/* 2 comedi/drivers/cb_pcidas.c 3 4 Developed by Ivan Martinez and Frank Mori Hess, with valuable help from 5 David Schleef and the rest of the Comedi developers comunity. 6 7 Copyright (C) 2001-2003 Ivan Martinez <imr@oersted.dtu.dk> 8 Copyright (C) 2001,2002 Frank Mori Hess <fmhess@users.sourceforge.net> 9 10 COMEDI - Linux Control and Measurement Device Interface 11 Copyright (C) 1997-8 David A. Schleef <ds@schleef.org> 12 13 This program is free software; you can redistribute it and/or modify 14 it under the terms of the GNU General Public License as published by 15 the Free Software Foundation; either version 2 of the License, or 16 (at your option) any later version. 17 18 This program is distributed in the hope that it will be useful, 19 but WITHOUT ANY WARRANTY; without even the implied warranty of 20 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 21 GNU General Public License for more details. 22 23 You should have received a copy of the GNU General Public License 24 along with this program; if not, write to the Free Software 25 Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. 26 27************************************************************************ 28*/ 29/* 30Driver: cb_pcidas 31Description: MeasurementComputing PCI-DAS series with the AMCC S5933 PCI controller 32Author: Ivan Martinez <imr@oersted.dtu.dk>, 33 Frank Mori Hess <fmhess@users.sourceforge.net> 34Updated: 2003-3-11 35Devices: [Measurement Computing] PCI-DAS1602/16 (cb_pcidas), 36 PCI-DAS1602/16jr, PCI-DAS1602/12, PCI-DAS1200, PCI-DAS1200jr, 37 PCI-DAS1000, PCI-DAS1001, PCI_DAS1002 38 39Status: 40 There are many reports of the driver being used with most of the 41 supported cards. Despite no detailed log is maintained, it can 42 be said that the driver is quite tested and stable. 43 44 The boards may be autocalibrated using the comedi_calibrate 45 utility. 46 47Configuration options: 48 [0] - PCI bus of device (optional) 49 [1] - PCI slot of device (optional) 50 If bus/slot is not specified, the first supported 51 PCI device found will be used. 52 53For commands, the scanned channels must be consecutive 54(i.e. 4-5-6-7, 2-3-4,...), and must all have the same 55range and aref. 56*/ 57/* 58 59TODO: 60 61analog triggering on 1602 series 62*/ 63 64#include "../comedidev.h" 65#include <linux/delay.h> 66#include <linux/interrupt.h> 67 68#include "8253.h" 69#include "8255.h" 70#include "amcc_s5933.h" 71#include "comedi_pci.h" 72#include "comedi_fc.h" 73 74#undef CB_PCIDAS_DEBUG /* disable debugging code */ 75/* #define CB_PCIDAS_DEBUG enable debugging code */ 76 77/* PCI vendor number of ComputerBoards/MeasurementComputing */ 78#define PCI_VENDOR_ID_CB 0x1307 79#define TIMER_BASE 100 /* 10MHz master clock */ 80#define AI_BUFFER_SIZE 1024 /* maximum fifo size of any supported board */ 81#define AO_BUFFER_SIZE 1024 /* maximum fifo size of any supported board */ 82#define NUM_CHANNELS_8800 8 83#define NUM_CHANNELS_7376 1 84#define NUM_CHANNELS_8402 2 85#define NUM_CHANNELS_DAC08 1 86 87/* PCI-DAS base addresses */ 88 89/* indices of base address regions */ 90#define S5933_BADRINDEX 0 91#define CONT_STAT_BADRINDEX 1 92#define ADC_FIFO_BADRINDEX 2 93#define PACER_BADRINDEX 3 94#define AO_BADRINDEX 4 95/* sizes of io regions */ 96#define CONT_STAT_SIZE 10 97#define ADC_FIFO_SIZE 4 98#define PACER_SIZE 12 99#define AO_SIZE 4 100 101/* Control/Status registers */ 102#define INT_ADCFIFO 0 /* INTERRUPT / ADC FIFO register */ 103#define INT_EOS 0x1 /* interrupt end of scan */ 104#define INT_FHF 0x2 /* interrupt fifo half full */ 105#define INT_FNE 0x3 /* interrupt fifo not empty */ 106#define INT_MASK 0x3 /* mask of interrupt select bits */ 107#define INTE 0x4 /* interrupt enable */ 108#define DAHFIE 0x8 /* dac half full interrupt enable */ 109#define EOAIE 0x10 /* end of aquisition interrupt enable */ 110#define DAHFI 0x20 /* dac half full read status / write interrupt clear */ 111#define EOAI 0x40 /* read end of acq. interrupt status / write clear */ 112#define INT 0x80 /* read interrupt status / write clear */ 113#define EOBI 0x200 /* read end of burst interrupt status */ 114#define ADHFI 0x400 /* read half-full interrupt status */ 115#define ADNEI 0x800 /* read fifo not empty interrupt latch status */ 116#define ADNE 0x1000 /* read, fifo not empty (realtime, not latched) status */ 117#define DAEMIE 0x1000 /* write, dac empty interrupt enable */ 118#define LADFUL 0x2000 /* read fifo overflow / write clear */ 119#define DAEMI 0x4000 /* dac fifo empty interrupt status / write clear */ 120 121#define ADCMUX_CONT 2 /* ADC CHANNEL MUX AND CONTROL register */ 122#define BEGIN_SCAN(x) ((x) & 0xf) 123#define END_SCAN(x) (((x) & 0xf) << 4) 124#define GAIN_BITS(x) (((x) & 0x3) << 8) 125#define UNIP 0x800 /* Analog front-end unipolar for range */ 126#define SE 0x400 /* Inputs in single-ended mode */ 127#define PACER_MASK 0x3000 /* pacer source bits */ 128#define PACER_INT 0x1000 /* internal pacer */ 129#define PACER_EXT_FALL 0x2000 /* external falling edge */ 130#define PACER_EXT_RISE 0x3000 /* external rising edge */ 131#define EOC 0x4000 /* adc not busy */ 132 133#define TRIG_CONTSTAT 4 /* TRIGGER CONTROL/STATUS register */ 134#define SW_TRIGGER 0x1 /* software start trigger */ 135#define EXT_TRIGGER 0x2 /* external start trigger */ 136#define ANALOG_TRIGGER 0x3 /* external analog trigger */ 137#define TRIGGER_MASK 0x3 /* mask of bits that determine start trigger */ 138#define TGEN 0x10 /* enable external start trigger */ 139#define BURSTE 0x20 /* burst mode enable */ 140#define XTRCL 0x80 /* clear external trigger */ 141 142#define CALIBRATION_REG 6 /* CALIBRATION register */ 143#define SELECT_8800_BIT 0x100 /* select 8800 caldac */ 144#define SELECT_TRIMPOT_BIT 0x200 /* select ad7376 trim pot */ 145#define SELECT_DAC08_BIT 0x400 /* select dac08 caldac */ 146#define CAL_SRC_BITS(x) (((x) & 0x7) << 11) 147#define CAL_EN_BIT 0x4000 /* read calibration source instead of analog input channel 0 */ 148#define SERIAL_DATA_IN_BIT 0x8000 /* serial data stream going to 8800 and 7376 */ 149 150#define DAC_CSR 0x8 /* dac control and status register */ 151enum dac_csr_bits { 152 DACEN = 0x2, /* dac enable */ 153 DAC_MODE_UPDATE_BOTH = 0x80, /* update both dacs when dac0 is written */ 154}; 155static inline unsigned int DAC_RANGE(unsigned int channel, unsigned int range) 156{ 157 return (range & 0x3) << (8 + 2 * (channel & 0x1)); 158} 159 160static inline unsigned int DAC_RANGE_MASK(unsigned int channel) 161{ 162 return 0x3 << (8 + 2 * (channel & 0x1)); 163}; 164 165/* bits for 1602 series only */ 166enum dac_csr_bits_1602 { 167 DAC_EMPTY = 0x1, /* dac fifo empty, read, write clear */ 168 DAC_START = 0x4, /* start/arm dac fifo operations */ 169 DAC_PACER_MASK = 0x18, /* bits that set dac pacer source */ 170 DAC_PACER_INT = 0x8, /* dac internal pacing */ 171 DAC_PACER_EXT_FALL = 0x10, /* dac external pacing, falling edge */ 172 DAC_PACER_EXT_RISE = 0x18, /* dac external pacing, rising edge */ 173}; 174static inline unsigned int DAC_CHAN_EN(unsigned int channel) 175{ 176 return 1 << (5 + (channel & 0x1)); /* enable channel 0 or 1 */ 177}; 178 179/* analog input fifo */ 180#define ADCDATA 0 /* ADC DATA register */ 181#define ADCFIFOCLR 2 /* ADC FIFO CLEAR */ 182 183/* pacer, counter, dio registers */ 184#define ADC8254 0 185#define DIO_8255 4 186#define DAC8254 8 187 188/* analog output registers for 100x, 1200 series */ 189static inline unsigned int DAC_DATA_REG(unsigned int channel) 190{ 191 return 2 * (channel & 0x1); 192} 193 194/* analog output registers for 1602 series*/ 195#define DACDATA 0 /* DAC DATA register */ 196#define DACFIFOCLR 2 /* DAC FIFO CLEAR */ 197 198/* bit in hexadecimal representation of range index that indicates unipolar input range */ 199#define IS_UNIPOLAR 0x4 200/* analog input ranges for most boards */ 201static const struct comedi_lrange cb_pcidas_ranges = { 202 8, 203 { 204 BIP_RANGE(10), 205 BIP_RANGE(5), 206 BIP_RANGE(2.5), 207 BIP_RANGE(1.25), 208 UNI_RANGE(10), 209 UNI_RANGE(5), 210 UNI_RANGE(2.5), 211 UNI_RANGE(1.25) 212 } 213}; 214 215/* pci-das1001 input ranges */ 216static const struct comedi_lrange cb_pcidas_alt_ranges = { 217 8, 218 { 219 BIP_RANGE(10), 220 BIP_RANGE(1), 221 BIP_RANGE(0.1), 222 BIP_RANGE(0.01), 223 UNI_RANGE(10), 224 UNI_RANGE(1), 225 UNI_RANGE(0.1), 226 UNI_RANGE(0.01) 227 } 228}; 229 230/* analog output ranges */ 231static const struct comedi_lrange cb_pcidas_ao_ranges = { 232 4, 233 { 234 BIP_RANGE(5), 235 BIP_RANGE(10), 236 UNI_RANGE(5), 237 UNI_RANGE(10), 238 } 239}; 240 241enum trimpot_model { 242 AD7376, 243 AD8402, 244}; 245 246struct cb_pcidas_board { 247 const char *name; 248 unsigned short device_id; 249 int ai_se_chans; /* Inputs in single-ended mode */ 250 int ai_diff_chans; /* Inputs in differential mode */ 251 int ai_bits; /* analog input resolution */ 252 int ai_speed; /* fastest conversion period in ns */ 253 int ao_nchan; /* number of analog out channels */ 254 int has_ao_fifo; /* analog output has fifo */ 255 int ao_scan_speed; /* analog output speed for 1602 series (for a scan, not conversion) */ 256 int fifo_size; /* number of samples fifo can hold */ 257 const struct comedi_lrange *ranges; 258 enum trimpot_model trimpot; 259 unsigned has_dac08:1; 260}; 261 262static const struct cb_pcidas_board cb_pcidas_boards[] = { 263 { 264 .name = "pci-das1602/16", 265 .device_id = 0x1, 266 .ai_se_chans = 16, 267 .ai_diff_chans = 8, 268 .ai_bits = 16, 269 .ai_speed = 5000, 270 .ao_nchan = 2, 271 .has_ao_fifo = 1, 272 .ao_scan_speed = 10000, 273 .fifo_size = 512, 274 .ranges = &cb_pcidas_ranges, 275 .trimpot = AD8402, 276 .has_dac08 = 1, 277 }, 278 { 279 .name = "pci-das1200", 280 .device_id = 0xF, 281 .ai_se_chans = 16, 282 .ai_diff_chans = 8, 283 .ai_bits = 12, 284 .ai_speed = 3200, 285 .ao_nchan = 2, 286 .has_ao_fifo = 0, 287 .fifo_size = 1024, 288 .ranges = &cb_pcidas_ranges, 289 .trimpot = AD7376, 290 .has_dac08 = 0, 291 }, 292 { 293 .name = "pci-das1602/12", 294 .device_id = 0x10, 295 .ai_se_chans = 16, 296 .ai_diff_chans = 8, 297 .ai_bits = 12, 298 .ai_speed = 3200, 299 .ao_nchan = 2, 300 .has_ao_fifo = 1, 301 .ao_scan_speed = 4000, 302 .fifo_size = 1024, 303 .ranges = &cb_pcidas_ranges, 304 .trimpot = AD7376, 305 .has_dac08 = 0, 306 }, 307 { 308 .name = "pci-das1200/jr", 309 .device_id = 0x19, 310 .ai_se_chans = 16, 311 .ai_diff_chans = 8, 312 .ai_bits = 12, 313 .ai_speed = 3200, 314 .ao_nchan = 0, 315 .has_ao_fifo = 0, 316 .fifo_size = 1024, 317 .ranges = &cb_pcidas_ranges, 318 .trimpot = AD7376, 319 .has_dac08 = 0, 320 }, 321 { 322 .name = "pci-das1602/16/jr", 323 .device_id = 0x1C, 324 .ai_se_chans = 16, 325 .ai_diff_chans = 8, 326 .ai_bits = 16, 327 .ai_speed = 5000, 328 .ao_nchan = 0, 329 .has_ao_fifo = 0, 330 .fifo_size = 512, 331 .ranges = &cb_pcidas_ranges, 332 .trimpot = AD8402, 333 .has_dac08 = 1, 334 }, 335 { 336 .name = "pci-das1000", 337 .device_id = 0x4C, 338 .ai_se_chans = 16, 339 .ai_diff_chans = 8, 340 .ai_bits = 12, 341 .ai_speed = 4000, 342 .ao_nchan = 0, 343 .has_ao_fifo = 0, 344 .fifo_size = 1024, 345 .ranges = &cb_pcidas_ranges, 346 .trimpot = AD7376, 347 .has_dac08 = 0, 348 }, 349 { 350 .name = "pci-das1001", 351 .device_id = 0x1a, 352 .ai_se_chans = 16, 353 .ai_diff_chans = 8, 354 .ai_bits = 12, 355 .ai_speed = 6800, 356 .ao_nchan = 2, 357 .has_ao_fifo = 0, 358 .fifo_size = 1024, 359 .ranges = &cb_pcidas_alt_ranges, 360 .trimpot = AD7376, 361 .has_dac08 = 0, 362 }, 363 { 364 .name = "pci-das1002", 365 .device_id = 0x1b, 366 .ai_se_chans = 16, 367 .ai_diff_chans = 8, 368 .ai_bits = 12, 369 .ai_speed = 6800, 370 .ao_nchan = 2, 371 .has_ao_fifo = 0, 372 .fifo_size = 1024, 373 .ranges = &cb_pcidas_ranges, 374 .trimpot = AD7376, 375 .has_dac08 = 0, 376 }, 377}; 378 379static DEFINE_PCI_DEVICE_TABLE(cb_pcidas_pci_table) = { 380 { 381 PCI_VENDOR_ID_CB, 0x0001, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, { 382 PCI_VENDOR_ID_CB, 0x000f, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, { 383 PCI_VENDOR_ID_CB, 0x0010, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, { 384 PCI_VENDOR_ID_CB, 0x0019, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, { 385 PCI_VENDOR_ID_CB, 0x001c, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, { 386 PCI_VENDOR_ID_CB, 0x004c, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, { 387 PCI_VENDOR_ID_CB, 0x001a, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, { 388 PCI_VENDOR_ID_CB, 0x001b, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, { 389 0} 390}; 391 392MODULE_DEVICE_TABLE(pci, cb_pcidas_pci_table); 393 394/* 395 * Useful for shorthand access to the particular board structure 396 */ 397#define thisboard ((const struct cb_pcidas_board *)dev->board_ptr) 398 399/* this structure is for data unique to this hardware driver. If 400 several hardware drivers keep similar information in this structure, 401 feel free to suggest moving the variable to the struct comedi_device struct. */ 402struct cb_pcidas_private { 403 /* would be useful for a PCI device */ 404 struct pci_dev *pci_dev; 405 /* base addresses */ 406 unsigned long s5933_config; 407 unsigned long control_status; 408 unsigned long adc_fifo; 409 unsigned long pacer_counter_dio; 410 unsigned long ao_registers; 411 /* divisors of master clock for analog input pacing */ 412 unsigned int divisor1; 413 unsigned int divisor2; 414 volatile unsigned int count; /* number of analog input samples remaining */ 415 volatile unsigned int adc_fifo_bits; /* bits to write to interupt/adcfifo register */ 416 volatile unsigned int s5933_intcsr_bits; /* bits to write to amcc s5933 interrupt control/status register */ 417 volatile unsigned int ao_control_bits; /* bits to write to ao control and status register */ 418 short ai_buffer[AI_BUFFER_SIZE]; 419 short ao_buffer[AO_BUFFER_SIZE]; 420 /* divisors of master clock for analog output pacing */ 421 unsigned int ao_divisor1; 422 unsigned int ao_divisor2; 423 volatile unsigned int ao_count; /* number of analog output samples remaining */ 424 int ao_value[2]; /* remember what the analog outputs are set to, to allow readback */ 425 unsigned int caldac_value[NUM_CHANNELS_8800]; /* for readback of caldac */ 426 unsigned int trimpot_value[NUM_CHANNELS_8402]; /* for readback of trimpot */ 427 unsigned int dac08_value; 428 unsigned int calibration_source; 429}; 430 431/* 432 * most drivers define the following macro to make it easy to 433 * access the private structure. 434 */ 435#define devpriv ((struct cb_pcidas_private *)dev->private) 436 437/* 438 * The struct comedi_driver structure tells the Comedi core module 439 * which functions to call to configure/deconfigure (attach/detach) 440 * the board, and also about the kernel module that contains 441 * the device code. 442 */ 443static int cb_pcidas_attach(struct comedi_device *dev, 444 struct comedi_devconfig *it); 445static int cb_pcidas_detach(struct comedi_device *dev); 446static struct comedi_driver driver_cb_pcidas = { 447 .driver_name = "cb_pcidas", 448 .module = THIS_MODULE, 449 .attach = cb_pcidas_attach, 450 .detach = cb_pcidas_detach, 451}; 452 453static int cb_pcidas_ai_rinsn(struct comedi_device *dev, 454 struct comedi_subdevice *s, 455 struct comedi_insn *insn, unsigned int *data); 456static int ai_config_insn(struct comedi_device *dev, struct comedi_subdevice *s, 457 struct comedi_insn *insn, unsigned int *data); 458static int cb_pcidas_ao_nofifo_winsn(struct comedi_device *dev, 459 struct comedi_subdevice *s, 460 struct comedi_insn *insn, 461 unsigned int *data); 462static int cb_pcidas_ao_fifo_winsn(struct comedi_device *dev, 463 struct comedi_subdevice *s, 464 struct comedi_insn *insn, 465 unsigned int *data); 466static int cb_pcidas_ao_readback_insn(struct comedi_device *dev, 467 struct comedi_subdevice *s, 468 struct comedi_insn *insn, 469 unsigned int *data); 470static int cb_pcidas_ai_cmd(struct comedi_device *dev, 471 struct comedi_subdevice *s); 472static int cb_pcidas_ai_cmdtest(struct comedi_device *dev, 473 struct comedi_subdevice *s, 474 struct comedi_cmd *cmd); 475static int cb_pcidas_ao_cmd(struct comedi_device *dev, 476 struct comedi_subdevice *s); 477static int cb_pcidas_ao_inttrig(struct comedi_device *dev, 478 struct comedi_subdevice *subdev, 479 unsigned int trig_num); 480static int cb_pcidas_ao_cmdtest(struct comedi_device *dev, 481 struct comedi_subdevice *s, 482 struct comedi_cmd *cmd); 483static irqreturn_t cb_pcidas_interrupt(int irq, void *d); 484static void handle_ao_interrupt(struct comedi_device *dev, unsigned int status); 485static int cb_pcidas_cancel(struct comedi_device *dev, 486 struct comedi_subdevice *s); 487static int cb_pcidas_ao_cancel(struct comedi_device *dev, 488 struct comedi_subdevice *s); 489static void cb_pcidas_load_counters(struct comedi_device *dev, unsigned int *ns, 490 int round_flags); 491static int eeprom_read_insn(struct comedi_device *dev, 492 struct comedi_subdevice *s, 493 struct comedi_insn *insn, unsigned int *data); 494static int caldac_read_insn(struct comedi_device *dev, 495 struct comedi_subdevice *s, 496 struct comedi_insn *insn, unsigned int *data); 497static int caldac_write_insn(struct comedi_device *dev, 498 struct comedi_subdevice *s, 499 struct comedi_insn *insn, unsigned int *data); 500static int trimpot_read_insn(struct comedi_device *dev, 501 struct comedi_subdevice *s, 502 struct comedi_insn *insn, unsigned int *data); 503static int cb_pcidas_trimpot_write(struct comedi_device *dev, 504 unsigned int channel, unsigned int value); 505static int trimpot_write_insn(struct comedi_device *dev, 506 struct comedi_subdevice *s, 507 struct comedi_insn *insn, unsigned int *data); 508static int dac08_read_insn(struct comedi_device *dev, 509 struct comedi_subdevice *s, struct comedi_insn *insn, 510 unsigned int *data); 511static int dac08_write(struct comedi_device *dev, unsigned int value); 512static int dac08_write_insn(struct comedi_device *dev, 513 struct comedi_subdevice *s, 514 struct comedi_insn *insn, unsigned int *data); 515static int caldac_8800_write(struct comedi_device *dev, unsigned int address, 516 uint8_t value); 517static int trimpot_7376_write(struct comedi_device *dev, uint8_t value); 518static int trimpot_8402_write(struct comedi_device *dev, unsigned int channel, 519 uint8_t value); 520static int nvram_read(struct comedi_device *dev, unsigned int address, 521 uint8_t *data); 522 523static inline unsigned int cal_enable_bits(struct comedi_device *dev) 524{ 525 return CAL_EN_BIT | CAL_SRC_BITS(devpriv->calibration_source); 526} 527 528/* 529 * Attach is called by the Comedi core to configure the driver 530 * for a particular board. 531 */ 532static int cb_pcidas_attach(struct comedi_device *dev, 533 struct comedi_devconfig *it) 534{ 535 struct comedi_subdevice *s; 536 struct pci_dev *pcidev; 537 int index; 538 int i; 539 540 printk("comedi%d: cb_pcidas: ", dev->minor); 541 542/* 543 * Allocate the private structure area. 544 */ 545 if (alloc_private(dev, sizeof(struct cb_pcidas_private)) < 0) 546 return -ENOMEM; 547 548/* 549 * Probe the device to determine what device in the series it is. 550 */ 551 printk("\n"); 552 553 for (pcidev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, NULL); 554 pcidev != NULL; 555 pcidev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, pcidev)) { 556 /* is it not a computer boards card? */ 557 if (pcidev->vendor != PCI_VENDOR_ID_CB) 558 continue; 559 /* loop through cards supported by this driver */ 560 for (index = 0; index < ARRAY_SIZE(cb_pcidas_boards); index++) { 561 if (cb_pcidas_boards[index].device_id != pcidev->device) 562 continue; 563 /* was a particular bus/slot requested? */ 564 if (it->options[0] || it->options[1]) { 565 /* are we on the wrong bus/slot? */ 566 if (pcidev->bus->number != it->options[0] || 567 PCI_SLOT(pcidev->devfn) != it->options[1]) { 568 continue; 569 } 570 } 571 devpriv->pci_dev = pcidev; 572 dev->board_ptr = cb_pcidas_boards + index; 573 goto found; 574 } 575 } 576 577 printk("No supported ComputerBoards/MeasurementComputing card found on " 578 "requested position\n"); 579 return -EIO; 580 581found: 582 583 printk("Found %s on bus %i, slot %i\n", cb_pcidas_boards[index].name, 584 pcidev->bus->number, PCI_SLOT(pcidev->devfn)); 585 586 /* 587 * Enable PCI device and reserve I/O ports. 588 */ 589 if (comedi_pci_enable(pcidev, "cb_pcidas")) { 590 printk(" Failed to enable PCI device and request regions\n"); 591 return -EIO; 592 } 593 /* 594 * Initialize devpriv->control_status and devpriv->adc_fifo to point to 595 * their base address. 596 */ 597 devpriv->s5933_config = 598 pci_resource_start(devpriv->pci_dev, S5933_BADRINDEX); 599 devpriv->control_status = 600 pci_resource_start(devpriv->pci_dev, CONT_STAT_BADRINDEX); 601 devpriv->adc_fifo = 602 pci_resource_start(devpriv->pci_dev, ADC_FIFO_BADRINDEX); 603 devpriv->pacer_counter_dio = 604 pci_resource_start(devpriv->pci_dev, PACER_BADRINDEX); 605 if (thisboard->ao_nchan) { 606 devpriv->ao_registers = 607 pci_resource_start(devpriv->pci_dev, AO_BADRINDEX); 608 } 609 /* disable and clear interrupts on amcc s5933 */ 610 outl(INTCSR_INBOX_INTR_STATUS, 611 devpriv->s5933_config + AMCC_OP_REG_INTCSR); 612 613 /* get irq */ 614 if (request_irq(devpriv->pci_dev->irq, cb_pcidas_interrupt, 615 IRQF_SHARED, "cb_pcidas", dev)) { 616 printk(" unable to allocate irq %d\n", devpriv->pci_dev->irq); 617 return -EINVAL; 618 } 619 dev->irq = devpriv->pci_dev->irq; 620 621 /* Initialize dev->board_name */ 622 dev->board_name = thisboard->name; 623 624/* 625 * Allocate the subdevice structures. 626 */ 627 if (alloc_subdevices(dev, 7) < 0) 628 return -ENOMEM; 629 630 s = dev->subdevices + 0; 631 /* analog input subdevice */ 632 dev->read_subdev = s; 633 s->type = COMEDI_SUBD_AI; 634 s->subdev_flags = SDF_READABLE | SDF_GROUND | SDF_DIFF | SDF_CMD_READ; 635 /* WARNING: Number of inputs in differential mode is ignored */ 636 s->n_chan = thisboard->ai_se_chans; 637 s->len_chanlist = thisboard->ai_se_chans; 638 s->maxdata = (1 << thisboard->ai_bits) - 1; 639 s->range_table = thisboard->ranges; 640 s->insn_read = cb_pcidas_ai_rinsn; 641 s->insn_config = ai_config_insn; 642 s->do_cmd = cb_pcidas_ai_cmd; 643 s->do_cmdtest = cb_pcidas_ai_cmdtest; 644 s->cancel = cb_pcidas_cancel; 645 646 /* analog output subdevice */ 647 s = dev->subdevices + 1; 648 if (thisboard->ao_nchan) { 649 s->type = COMEDI_SUBD_AO; 650 s->subdev_flags = SDF_READABLE | SDF_WRITABLE | SDF_GROUND; 651 s->n_chan = thisboard->ao_nchan; 652 /* analog out resolution is the same as analog input resolution, so use ai_bits */ 653 s->maxdata = (1 << thisboard->ai_bits) - 1; 654 s->range_table = &cb_pcidas_ao_ranges; 655 s->insn_read = cb_pcidas_ao_readback_insn; 656 if (thisboard->has_ao_fifo) { 657 dev->write_subdev = s; 658 s->subdev_flags |= SDF_CMD_WRITE; 659 s->insn_write = cb_pcidas_ao_fifo_winsn; 660 s->do_cmdtest = cb_pcidas_ao_cmdtest; 661 s->do_cmd = cb_pcidas_ao_cmd; 662 s->cancel = cb_pcidas_ao_cancel; 663 } else { 664 s->insn_write = cb_pcidas_ao_nofifo_winsn; 665 } 666 } else { 667 s->type = COMEDI_SUBD_UNUSED; 668 } 669 670 /* 8255 */ 671 s = dev->subdevices + 2; 672 subdev_8255_init(dev, s, NULL, devpriv->pacer_counter_dio + DIO_8255); 673 674 /* serial EEPROM, */ 675 s = dev->subdevices + 3; 676 s->type = COMEDI_SUBD_MEMORY; 677 s->subdev_flags = SDF_READABLE | SDF_INTERNAL; 678 s->n_chan = 256; 679 s->maxdata = 0xff; 680 s->insn_read = eeprom_read_insn; 681 682 /* 8800 caldac */ 683 s = dev->subdevices + 4; 684 s->type = COMEDI_SUBD_CALIB; 685 s->subdev_flags = SDF_READABLE | SDF_WRITABLE | SDF_INTERNAL; 686 s->n_chan = NUM_CHANNELS_8800; 687 s->maxdata = 0xff; 688 s->insn_read = caldac_read_insn; 689 s->insn_write = caldac_write_insn; 690 for (i = 0; i < s->n_chan; i++) 691 caldac_8800_write(dev, i, s->maxdata / 2); 692 693 /* trim potentiometer */ 694 s = dev->subdevices + 5; 695 s->type = COMEDI_SUBD_CALIB; 696 s->subdev_flags = SDF_READABLE | SDF_WRITABLE | SDF_INTERNAL; 697 if (thisboard->trimpot == AD7376) { 698 s->n_chan = NUM_CHANNELS_7376; 699 s->maxdata = 0x7f; 700 } else { 701 s->n_chan = NUM_CHANNELS_8402; 702 s->maxdata = 0xff; 703 } 704 s->insn_read = trimpot_read_insn; 705 s->insn_write = trimpot_write_insn; 706 for (i = 0; i < s->n_chan; i++) 707 cb_pcidas_trimpot_write(dev, i, s->maxdata / 2); 708 709 /* dac08 caldac */ 710 s = dev->subdevices + 6; 711 if (thisboard->has_dac08) { 712 s->type = COMEDI_SUBD_CALIB; 713 s->subdev_flags = SDF_READABLE | SDF_WRITABLE | SDF_INTERNAL; 714 s->n_chan = NUM_CHANNELS_DAC08; 715 s->insn_read = dac08_read_insn; 716 s->insn_write = dac08_write_insn; 717 s->maxdata = 0xff; 718 dac08_write(dev, s->maxdata / 2); 719 } else 720 s->type = COMEDI_SUBD_UNUSED; 721 722 /* make sure mailbox 4 is empty */ 723 inl(devpriv->s5933_config + AMCC_OP_REG_IMB4); 724 /* Set bits to enable incoming mailbox interrupts on amcc s5933. */ 725 devpriv->s5933_intcsr_bits = 726 INTCSR_INBOX_BYTE(3) | INTCSR_INBOX_SELECT(3) | 727 INTCSR_INBOX_FULL_INT; 728 /* clear and enable interrupt on amcc s5933 */ 729 outl(devpriv->s5933_intcsr_bits | INTCSR_INBOX_INTR_STATUS, 730 devpriv->s5933_config + AMCC_OP_REG_INTCSR); 731 732 return 1; 733} 734 735/* 736 * cb_pcidas_detach is called to deconfigure a device. It should deallocate 737 * resources. 738 * This function is also called when _attach() fails, so it should be 739 * careful not to release resources that were not necessarily 740 * allocated by _attach(). dev->private and dev->subdevices are 741 * deallocated automatically by the core. 742 */ 743static int cb_pcidas_detach(struct comedi_device *dev) 744{ 745 printk("comedi%d: cb_pcidas: remove\n", dev->minor); 746 747 if (devpriv) { 748 if (devpriv->s5933_config) { 749 /* disable and clear interrupts on amcc s5933 */ 750 outl(INTCSR_INBOX_INTR_STATUS, 751 devpriv->s5933_config + AMCC_OP_REG_INTCSR); 752#ifdef CB_PCIDAS_DEBUG 753 printk("detaching, incsr is 0x%x\n", 754 inl(devpriv->s5933_config + AMCC_OP_REG_INTCSR)); 755#endif 756 } 757 } 758 if (dev->irq) 759 free_irq(dev->irq, dev); 760 if (dev->subdevices) 761 subdev_8255_cleanup(dev, dev->subdevices + 2); 762 if (devpriv && devpriv->pci_dev) { 763 if (devpriv->s5933_config) 764 comedi_pci_disable(devpriv->pci_dev); 765 pci_dev_put(devpriv->pci_dev); 766 } 767 768 return 0; 769} 770 771/* 772 * "instructions" read/write data in "one-shot" or "software-triggered" 773 * mode. 774 */ 775static int cb_pcidas_ai_rinsn(struct comedi_device *dev, 776 struct comedi_subdevice *s, 777 struct comedi_insn *insn, unsigned int *data) 778{ 779 int n, i; 780 unsigned int bits; 781 static const int timeout = 10000; 782 int channel; 783 /* enable calibration input if appropriate */ 784 if (insn->chanspec & CR_ALT_SOURCE) { 785 outw(cal_enable_bits(dev), 786 devpriv->control_status + CALIBRATION_REG); 787 channel = 0; 788 } else { 789 outw(0, devpriv->control_status + CALIBRATION_REG); 790 channel = CR_CHAN(insn->chanspec); 791 } 792 /* set mux limits and gain */ 793 bits = BEGIN_SCAN(channel) | 794 END_SCAN(channel) | GAIN_BITS(CR_RANGE(insn->chanspec)); 795 /* set unipolar/bipolar */ 796 if (CR_RANGE(insn->chanspec) & IS_UNIPOLAR) 797 bits |= UNIP; 798 /* set singleended/differential */ 799 if (CR_AREF(insn->chanspec) != AREF_DIFF) 800 bits |= SE; 801 outw(bits, devpriv->control_status + ADCMUX_CONT); 802 803 /* clear fifo */ 804 outw(0, devpriv->adc_fifo + ADCFIFOCLR); 805 806 /* convert n samples */ 807 for (n = 0; n < insn->n; n++) { 808 /* trigger conversion */ 809 outw(0, devpriv->adc_fifo + ADCDATA); 810 811 /* wait for conversion to end */ 812 /* return -ETIMEDOUT if there is a timeout */ 813 for (i = 0; i < timeout; i++) { 814 if (inw(devpriv->control_status + ADCMUX_CONT) & EOC) 815 break; 816 } 817 if (i == timeout) 818 return -ETIMEDOUT; 819 820 /* read data */ 821 data[n] = inw(devpriv->adc_fifo + ADCDATA); 822 } 823 824 /* return the number of samples read/written */ 825 return n; 826} 827 828static int ai_config_calibration_source(struct comedi_device *dev, 829 unsigned int *data) 830{ 831 static const int num_calibration_sources = 8; 832 unsigned int source = data[1]; 833 834 if (source >= num_calibration_sources) { 835 printk("invalid calibration source: %i\n", source); 836 return -EINVAL; 837 } 838 839 devpriv->calibration_source = source; 840 841 return 2; 842} 843 844static int ai_config_insn(struct comedi_device *dev, struct comedi_subdevice *s, 845 struct comedi_insn *insn, unsigned int *data) 846{ 847 int id = data[0]; 848 849 switch (id) { 850 case INSN_CONFIG_ALT_SOURCE: 851 return ai_config_calibration_source(dev, data); 852 break; 853 default: 854 return -EINVAL; 855 break; 856 } 857 return -EINVAL; 858} 859 860/* analog output insn for pcidas-1000 and 1200 series */ 861static int cb_pcidas_ao_nofifo_winsn(struct comedi_device *dev, 862 struct comedi_subdevice *s, 863 struct comedi_insn *insn, 864 unsigned int *data) 865{ 866 int channel; 867 unsigned long flags; 868 869 /* set channel and range */ 870 channel = CR_CHAN(insn->chanspec); 871 spin_lock_irqsave(&dev->spinlock, flags); 872 devpriv->ao_control_bits &= 873 ~DAC_MODE_UPDATE_BOTH & ~DAC_RANGE_MASK(channel); 874 devpriv->ao_control_bits |= 875 DACEN | DAC_RANGE(channel, CR_RANGE(insn->chanspec)); 876 outw(devpriv->ao_control_bits, devpriv->control_status + DAC_CSR); 877 spin_unlock_irqrestore(&dev->spinlock, flags); 878 879 /* remember value for readback */ 880 devpriv->ao_value[channel] = data[0]; 881 /* send data */ 882 outw(data[0], devpriv->ao_registers + DAC_DATA_REG(channel)); 883 884 return 1; 885} 886 887/* analog output insn for pcidas-1602 series */ 888static int cb_pcidas_ao_fifo_winsn(struct comedi_device *dev, 889 struct comedi_subdevice *s, 890 struct comedi_insn *insn, unsigned int *data) 891{ 892 int channel; 893 unsigned long flags; 894 895 /* clear dac fifo */ 896 outw(0, devpriv->ao_registers + DACFIFOCLR); 897 898 /* set channel and range */ 899 channel = CR_CHAN(insn->chanspec); 900 spin_lock_irqsave(&dev->spinlock, flags); 901 devpriv->ao_control_bits &= 902 ~DAC_CHAN_EN(0) & ~DAC_CHAN_EN(1) & ~DAC_RANGE_MASK(channel) & 903 ~DAC_PACER_MASK; 904 devpriv->ao_control_bits |= 905 DACEN | DAC_RANGE(channel, 906 CR_RANGE(insn-> 907 chanspec)) | DAC_CHAN_EN(channel) | 908 DAC_START; 909 outw(devpriv->ao_control_bits, devpriv->control_status + DAC_CSR); 910 spin_unlock_irqrestore(&dev->spinlock, flags); 911 912 /* remember value for readback */ 913 devpriv->ao_value[channel] = data[0]; 914 /* send data */ 915 outw(data[0], devpriv->ao_registers + DACDATA); 916 917 return 1; 918} 919 920/* analog output readback insn */ 921/* XXX loses track of analog output value back after an analog ouput command is executed */ 922static int cb_pcidas_ao_readback_insn(struct comedi_device *dev, 923 struct comedi_subdevice *s, 924 struct comedi_insn *insn, 925 unsigned int *data) 926{ 927 data[0] = devpriv->ao_value[CR_CHAN(insn->chanspec)]; 928 929 return 1; 930} 931 932static int eeprom_read_insn(struct comedi_device *dev, 933 struct comedi_subdevice *s, 934 struct comedi_insn *insn, unsigned int *data) 935{ 936 uint8_t nvram_data; 937 int retval; 938 939 retval = nvram_read(dev, CR_CHAN(insn->chanspec), &nvram_data); 940 if (retval < 0) 941 return retval; 942 943 data[0] = nvram_data; 944 945 return 1; 946} 947 948static int caldac_write_insn(struct comedi_device *dev, 949 struct comedi_subdevice *s, 950 struct comedi_insn *insn, unsigned int *data) 951{ 952 const unsigned int channel = CR_CHAN(insn->chanspec); 953 954 return caldac_8800_write(dev, channel, data[0]); 955} 956 957static int caldac_read_insn(struct comedi_device *dev, 958 struct comedi_subdevice *s, 959 struct comedi_insn *insn, unsigned int *data) 960{ 961 data[0] = devpriv->caldac_value[CR_CHAN(insn->chanspec)]; 962 963 return 1; 964} 965 966/* 1602/16 pregain offset */ 967static int dac08_write(struct comedi_device *dev, unsigned int value) 968{ 969 if (devpriv->dac08_value == value) 970 return 1; 971 972 devpriv->dac08_value = value; 973 974 outw(cal_enable_bits(dev) | (value & 0xff), 975 devpriv->control_status + CALIBRATION_REG); 976 udelay(1); 977 outw(cal_enable_bits(dev) | SELECT_DAC08_BIT | (value & 0xff), 978 devpriv->control_status + CALIBRATION_REG); 979 udelay(1); 980 outw(cal_enable_bits(dev) | (value & 0xff), 981 devpriv->control_status + CALIBRATION_REG); 982 udelay(1); 983 984 return 1; 985} 986 987static int dac08_write_insn(struct comedi_device *dev, 988 struct comedi_subdevice *s, 989 struct comedi_insn *insn, unsigned int *data) 990{ 991 return dac08_write(dev, data[0]); 992} 993 994static int dac08_read_insn(struct comedi_device *dev, 995 struct comedi_subdevice *s, struct comedi_insn *insn, 996 unsigned int *data) 997{ 998 data[0] = devpriv->dac08_value; 999 1000 return 1; 1001} 1002 1003static int cb_pcidas_trimpot_write(struct comedi_device *dev, 1004 unsigned int channel, unsigned int value) 1005{ 1006 if (devpriv->trimpot_value[channel] == value) 1007 return 1; 1008 1009 devpriv->trimpot_value[channel] = value; 1010 switch (thisboard->trimpot) { 1011 case AD7376: 1012 trimpot_7376_write(dev, value); 1013 break; 1014 case AD8402: 1015 trimpot_8402_write(dev, channel, value); 1016 break; 1017 default: 1018 comedi_error(dev, "driver bug?"); 1019 return -1; 1020 break; 1021 } 1022 1023 return 1; 1024} 1025 1026static int trimpot_write_insn(struct comedi_device *dev, 1027 struct comedi_subdevice *s, 1028 struct comedi_insn *insn, unsigned int *data) 1029{ 1030 unsigned int channel = CR_CHAN(insn->chanspec); 1031 1032 return cb_pcidas_trimpot_write(dev, channel, data[0]); 1033} 1034 1035static int trimpot_read_insn(struct comedi_device *dev, 1036 struct comedi_subdevice *s, 1037 struct comedi_insn *insn, unsigned int *data) 1038{ 1039 unsigned int channel = CR_CHAN(insn->chanspec); 1040 1041 data[0] = devpriv->trimpot_value[channel]; 1042 1043 return 1; 1044} 1045 1046static int cb_pcidas_ai_cmdtest(struct comedi_device *dev, 1047 struct comedi_subdevice *s, 1048 struct comedi_cmd *cmd) 1049{ 1050 int err = 0; 1051 int tmp; 1052 int i, gain, start_chan; 1053 1054 /* cmdtest tests a particular command to see if it is valid. 1055 * Using the cmdtest ioctl, a user can create a valid cmd 1056 * and then have it executes by the cmd ioctl. 1057 * 1058 * cmdtest returns 1,2,3,4 or 0, depending on which tests 1059 * the command passes. */ 1060 1061 /* step 1: make sure trigger sources are trivially valid */ 1062 1063 tmp = cmd->start_src; 1064 cmd->start_src &= TRIG_NOW | TRIG_EXT; 1065 if (!cmd->start_src || tmp != cmd->start_src) 1066 err++; 1067 1068 tmp = cmd->scan_begin_src; 1069 cmd->scan_begin_src &= TRIG_FOLLOW | TRIG_TIMER | TRIG_EXT; 1070 if (!cmd->scan_begin_src || tmp != cmd->scan_begin_src) 1071 err++; 1072 1073 tmp = cmd->convert_src; 1074 cmd->convert_src &= TRIG_TIMER | TRIG_NOW | TRIG_EXT; 1075 if (!cmd->convert_src || tmp != cmd->convert_src) 1076 err++; 1077 1078 tmp = cmd->scan_end_src; 1079 cmd->scan_end_src &= TRIG_COUNT; 1080 if (!cmd->scan_end_src || tmp != cmd->scan_end_src) 1081 err++; 1082 1083 tmp = cmd->stop_src; 1084 cmd->stop_src &= TRIG_COUNT | TRIG_NONE; 1085 if (!cmd->stop_src || tmp != cmd->stop_src) 1086 err++; 1087 1088 if (err) 1089 return 1; 1090 1091 /* step 2: make sure trigger sources are unique and mutually compatible */ 1092 1093 if (cmd->start_src != TRIG_NOW && cmd->start_src != TRIG_EXT) 1094 err++; 1095 if (cmd->scan_begin_src != TRIG_FOLLOW && 1096 cmd->scan_begin_src != TRIG_TIMER && 1097 cmd->scan_begin_src != TRIG_EXT) 1098 err++; 1099 if (cmd->convert_src != TRIG_TIMER && 1100 cmd->convert_src != TRIG_EXT && cmd->convert_src != TRIG_NOW) 1101 err++; 1102 if (cmd->stop_src != TRIG_COUNT && cmd->stop_src != TRIG_NONE) 1103 err++; 1104 1105 /* make sure trigger sources are compatible with each other */ 1106 if (cmd->scan_begin_src == TRIG_FOLLOW && cmd->convert_src == TRIG_NOW) 1107 err++; 1108 if (cmd->scan_begin_src != TRIG_FOLLOW && cmd->convert_src != TRIG_NOW) 1109 err++; 1110 if (cmd->start_src == TRIG_EXT && 1111 (cmd->convert_src == TRIG_EXT || cmd->scan_begin_src == TRIG_EXT)) 1112 err++; 1113 1114 if (err) 1115 return 2; 1116 1117 /* step 3: make sure arguments are trivially compatible */ 1118 1119 if (cmd->start_arg != 0) { 1120 cmd->start_arg = 0; 1121 err++; 1122 } 1123 1124 if (cmd->scan_begin_src == TRIG_TIMER) { 1125 if (cmd->scan_begin_arg < 1126 thisboard->ai_speed * cmd->chanlist_len) { 1127 cmd->scan_begin_arg = 1128 thisboard->ai_speed * cmd->chanlist_len; 1129 err++; 1130 } 1131 } 1132 if (cmd->convert_src == TRIG_TIMER) { 1133 if (cmd->convert_arg < thisboard->ai_speed) { 1134 cmd->convert_arg = thisboard->ai_speed; 1135 err++; 1136 } 1137 } 1138 1139 if (cmd->scan_end_arg != cmd->chanlist_len) { 1140 cmd->scan_end_arg = cmd->chanlist_len; 1141 err++; 1142 } 1143 if (cmd->stop_src == TRIG_NONE) { 1144 /* TRIG_NONE */ 1145 if (cmd->stop_arg != 0) { 1146 cmd->stop_arg = 0; 1147 err++; 1148 } 1149 } 1150 1151 if (err) 1152 return 3; 1153 1154 /* step 4: fix up any arguments */ 1155 1156 if (cmd->scan_begin_src == TRIG_TIMER) { 1157 tmp = cmd->scan_begin_arg; 1158 i8253_cascade_ns_to_timer_2div(TIMER_BASE, 1159 &(devpriv->divisor1), 1160 &(devpriv->divisor2), 1161 &(cmd->scan_begin_arg), 1162 cmd->flags & TRIG_ROUND_MASK); 1163 if (tmp != cmd->scan_begin_arg) 1164 err++; 1165 } 1166 if (cmd->convert_src == TRIG_TIMER) { 1167 tmp = cmd->convert_arg; 1168 i8253_cascade_ns_to_timer_2div(TIMER_BASE, 1169 &(devpriv->divisor1), 1170 &(devpriv->divisor2), 1171 &(cmd->convert_arg), 1172 cmd->flags & TRIG_ROUND_MASK); 1173 if (tmp != cmd->convert_arg) 1174 err++; 1175 } 1176 1177 if (err) 1178 return 4; 1179 1180 /* check channel/gain list against card's limitations */ 1181 if (cmd->chanlist) { 1182 gain = CR_RANGE(cmd->chanlist[0]); 1183 start_chan = CR_CHAN(cmd->chanlist[0]); 1184 for (i = 1; i < cmd->chanlist_len; i++) { 1185 if (CR_CHAN(cmd->chanlist[i]) != 1186 (start_chan + i) % s->n_chan) { 1187 comedi_error(dev, 1188 "entries in chanlist must be consecutive channels, counting upwards\n"); 1189 err++; 1190 } 1191 if (CR_RANGE(cmd->chanlist[i]) != gain) { 1192 comedi_error(dev, 1193 "entries in chanlist must all have the same gain\n"); 1194 err++; 1195 } 1196 } 1197 } 1198 1199 if (err) 1200 return 5; 1201 1202 return 0; 1203} 1204 1205static int cb_pcidas_ai_cmd(struct comedi_device *dev, 1206 struct comedi_subdevice *s) 1207{ 1208 struct comedi_async *async = s->async; 1209 struct comedi_cmd *cmd = &async->cmd; 1210 unsigned int bits; 1211 unsigned long flags; 1212 1213 /* make sure CAL_EN_BIT is disabled */ 1214 outw(0, devpriv->control_status + CALIBRATION_REG); 1215 /* initialize before settings pacer source and count values */ 1216 outw(0, devpriv->control_status + TRIG_CONTSTAT); 1217 /* clear fifo */ 1218 outw(0, devpriv->adc_fifo + ADCFIFOCLR); 1219 1220 /* set mux limits, gain and pacer source */ 1221 bits = BEGIN_SCAN(CR_CHAN(cmd->chanlist[0])) | 1222 END_SCAN(CR_CHAN(cmd->chanlist[cmd->chanlist_len - 1])) | 1223 GAIN_BITS(CR_RANGE(cmd->chanlist[0])); 1224 /* set unipolar/bipolar */ 1225 if (CR_RANGE(cmd->chanlist[0]) & IS_UNIPOLAR) 1226 bits |= UNIP; 1227 /* set singleended/differential */ 1228 if (CR_AREF(cmd->chanlist[0]) != AREF_DIFF) 1229 bits |= SE; 1230 /* set pacer source */ 1231 if (cmd->convert_src == TRIG_EXT || cmd->scan_begin_src == TRIG_EXT) 1232 bits |= PACER_EXT_RISE; 1233 else 1234 bits |= PACER_INT; 1235 outw(bits, devpriv->control_status + ADCMUX_CONT); 1236 1237#ifdef CB_PCIDAS_DEBUG 1238 printk("comedi: sent 0x%x to adcmux control\n", bits); 1239#endif 1240 1241 /* load counters */ 1242 if (cmd->convert_src == TRIG_TIMER) 1243 cb_pcidas_load_counters(dev, &cmd->convert_arg, 1244 cmd->flags & TRIG_ROUND_MASK); 1245 else if (cmd->scan_begin_src == TRIG_TIMER) 1246 cb_pcidas_load_counters(dev, &cmd->scan_begin_arg, 1247 cmd->flags & TRIG_ROUND_MASK); 1248 1249 /* set number of conversions */ 1250 if (cmd->stop_src == TRIG_COUNT) 1251 devpriv->count = cmd->chanlist_len * cmd->stop_arg; 1252 /* enable interrupts */ 1253 spin_lock_irqsave(&dev->spinlock, flags); 1254 devpriv->adc_fifo_bits |= INTE; 1255 devpriv->adc_fifo_bits &= ~INT_MASK; 1256 if (cmd->flags & TRIG_WAKE_EOS) { 1257 if (cmd->convert_src == TRIG_NOW && cmd->chanlist_len > 1) 1258 devpriv->adc_fifo_bits |= INT_EOS; /* interrupt end of burst */ 1259 else 1260 devpriv->adc_fifo_bits |= INT_FNE; /* interrupt fifo not empty */ 1261 } else { 1262 devpriv->adc_fifo_bits |= INT_FHF; /* interrupt fifo half full */ 1263 } 1264#ifdef CB_PCIDAS_DEBUG 1265 printk("comedi: adc_fifo_bits are 0x%x\n", devpriv->adc_fifo_bits); 1266#endif 1267 /* enable (and clear) interrupts */ 1268 outw(devpriv->adc_fifo_bits | EOAI | INT | LADFUL, 1269 devpriv->control_status + INT_ADCFIFO); 1270 spin_unlock_irqrestore(&dev->spinlock, flags); 1271 1272 /* set start trigger and burst mode */ 1273 bits = 0; 1274 if (cmd->start_src == TRIG_NOW) 1275 bits |= SW_TRIGGER; 1276 else if (cmd->start_src == TRIG_EXT) 1277 bits |= EXT_TRIGGER | TGEN | XTRCL; 1278 else { 1279 comedi_error(dev, "bug!"); 1280 return -1; 1281 } 1282 if (cmd->convert_src == TRIG_NOW && cmd->chanlist_len > 1) 1283 bits |= BURSTE; 1284 outw(bits, devpriv->control_status + TRIG_CONTSTAT); 1285#ifdef CB_PCIDAS_DEBUG 1286 printk("comedi: sent 0x%x to trig control\n", bits); 1287#endif 1288 1289 return 0; 1290} 1291 1292static int cb_pcidas_ao_cmdtest(struct comedi_device *dev, 1293 struct comedi_subdevice *s, 1294 struct comedi_cmd *cmd) 1295{ 1296 int err = 0; 1297 int tmp; 1298 1299 /* cmdtest tests a particular command to see if it is valid. 1300 * Using the cmdtest ioctl, a user can create a valid cmd 1301 * and then have it executes by the cmd ioctl. 1302 * 1303 * cmdtest returns 1,2,3,4 or 0, depending on which tests 1304 * the command passes. */ 1305 1306 /* step 1: make sure trigger sources are trivially valid */ 1307 1308 tmp = cmd->start_src; 1309 cmd->start_src &= TRIG_INT; 1310 if (!cmd->start_src || tmp != cmd->start_src) 1311 err++; 1312 1313 tmp = cmd->scan_begin_src; 1314 cmd->scan_begin_src &= TRIG_TIMER | TRIG_EXT; 1315 if (!cmd->scan_begin_src || tmp != cmd->scan_begin_src) 1316 err++; 1317 1318 tmp = cmd->convert_src; 1319 cmd->convert_src &= TRIG_NOW; 1320 if (!cmd->convert_src || tmp != cmd->convert_src) 1321 err++; 1322 1323 tmp = cmd->scan_end_src; 1324 cmd->scan_end_src &= TRIG_COUNT; 1325 if (!cmd->scan_end_src || tmp != cmd->scan_end_src) 1326 err++; 1327 1328 tmp = cmd->stop_src; 1329 cmd->stop_src &= TRIG_COUNT | TRIG_NONE; 1330 if (!cmd->stop_src || tmp != cmd->stop_src) 1331 err++; 1332 1333 if (err) 1334 return 1; 1335 1336 /* step 2: make sure trigger sources are unique and mutually compatible */ 1337 1338 if (cmd->scan_begin_src != TRIG_TIMER && 1339 cmd->scan_begin_src != TRIG_EXT) 1340 err++; 1341 if (cmd->stop_src != TRIG_COUNT && cmd->stop_src != TRIG_NONE) 1342 err++; 1343 1344 if (err) 1345 return 2; 1346 1347 /* step 3: make sure arguments are trivially compatible */ 1348 1349 if (cmd->start_arg != 0) { 1350 cmd->start_arg = 0; 1351 err++; 1352 } 1353 1354 if (cmd->scan_begin_src == TRIG_TIMER) { 1355 if (cmd->scan_begin_arg < thisboard->ao_scan_speed) { 1356 cmd->scan_begin_arg = thisboard->ao_scan_speed; 1357 err++; 1358 } 1359 } 1360 1361 if (cmd->scan_end_arg != cmd->chanlist_len) { 1362 cmd->scan_end_arg = cmd->chanlist_len; 1363 err++; 1364 } 1365 if (cmd->stop_src == TRIG_NONE) { 1366 /* TRIG_NONE */ 1367 if (cmd->stop_arg != 0) { 1368 cmd->stop_arg = 0; 1369 err++; 1370 } 1371 } 1372 1373 if (err) 1374 return 3; 1375 1376 /* step 4: fix up any arguments */ 1377 1378 if (cmd->scan_begin_src == TRIG_TIMER) { 1379 tmp = cmd->scan_begin_arg; 1380 i8253_cascade_ns_to_timer_2div(TIMER_BASE, 1381 &(devpriv->ao_divisor1), 1382 &(devpriv->ao_divisor2), 1383 &(cmd->scan_begin_arg), 1384 cmd->flags & TRIG_ROUND_MASK); 1385 if (tmp != cmd->scan_begin_arg) 1386 err++; 1387 } 1388 1389 if (err) 1390 return 4; 1391 1392 /* check channel/gain list against card's limitations */ 1393 if (cmd->chanlist && cmd->chanlist_len > 1) { 1394 if (CR_CHAN(cmd->chanlist[0]) != 0 || 1395 CR_CHAN(cmd->chanlist[1]) != 1) { 1396 comedi_error(dev, 1397 "channels must be ordered channel 0, channel 1 in chanlist\n"); 1398 err++; 1399 } 1400 } 1401 1402 if (err) 1403 return 5; 1404 1405 return 0; 1406} 1407 1408static int cb_pcidas_ao_cmd(struct comedi_device *dev, 1409 struct comedi_subdevice *s) 1410{ 1411 struct comedi_async *async = s->async; 1412 struct comedi_cmd *cmd = &async->cmd; 1413 unsigned int i; 1414 unsigned long flags; 1415 1416 /* set channel limits, gain */ 1417 spin_lock_irqsave(&dev->spinlock, flags); 1418 for (i = 0; i < cmd->chanlist_len; i++) { 1419 /* enable channel */ 1420 devpriv->ao_control_bits |= 1421 DAC_CHAN_EN(CR_CHAN(cmd->chanlist[i])); 1422 /* set range */ 1423 devpriv->ao_control_bits |= DAC_RANGE(CR_CHAN(cmd->chanlist[i]), 1424 CR_RANGE(cmd-> 1425 chanlist[i])); 1426 } 1427 1428 /* disable analog out before settings pacer source and count values */ 1429 outw(devpriv->ao_control_bits, devpriv->control_status + DAC_CSR); 1430 spin_unlock_irqrestore(&dev->spinlock, flags); 1431 1432 /* clear fifo */ 1433 outw(0, devpriv->ao_registers + DACFIFOCLR); 1434 1435 /* load counters */ 1436 if (cmd->scan_begin_src == TRIG_TIMER) { 1437 i8253_cascade_ns_to_timer_2div(TIMER_BASE, 1438 &(devpriv->ao_divisor1), 1439 &(devpriv->ao_divisor2), 1440 &(cmd->scan_begin_arg), 1441 cmd->flags); 1442 1443 /* Write the values of ctr1 and ctr2 into counters 1 and 2 */ 1444 i8254_load(devpriv->pacer_counter_dio + DAC8254, 0, 1, 1445 devpriv->ao_divisor1, 2); 1446 i8254_load(devpriv->pacer_counter_dio + DAC8254, 0, 2, 1447 devpriv->ao_divisor2, 2); 1448 } 1449 /* set number of conversions */ 1450 if (cmd->stop_src == TRIG_COUNT) 1451 devpriv->ao_count = cmd->chanlist_len * cmd->stop_arg; 1452 /* set pacer source */ 1453 spin_lock_irqsave(&dev->spinlock, flags); 1454 switch (cmd->scan_begin_src) { 1455 case TRIG_TIMER: 1456 devpriv->ao_control_bits |= DAC_PACER_INT; 1457 break; 1458 case TRIG_EXT: 1459 devpriv->ao_control_bits |= DAC_PACER_EXT_RISE; 1460 break; 1461 default: 1462 spin_unlock_irqrestore(&dev->spinlock, flags); 1463 comedi_error(dev, "error setting dac pacer source"); 1464 return -1; 1465 break; 1466 } 1467 spin_unlock_irqrestore(&dev->spinlock, flags); 1468 1469 async->inttrig = cb_pcidas_ao_inttrig; 1470 1471 return 0; 1472} 1473 1474static int cb_pcidas_ao_inttrig(struct comedi_device *dev, 1475 struct comedi_subdevice *s, 1476 unsigned int trig_num) 1477{ 1478 unsigned int num_bytes, num_points = thisboard->fifo_size; 1479 struct comedi_async *async = s->async; 1480 struct comedi_cmd *cmd = &s->async->cmd; 1481 unsigned long flags; 1482 1483 if (trig_num != 0) 1484 return -EINVAL; 1485 1486 /* load up fifo */ 1487 if (cmd->stop_src == TRIG_COUNT && devpriv->ao_count < num_points) 1488 num_points = devpriv->ao_count; 1489 1490 num_bytes = cfc_read_array_from_buffer(s, devpriv->ao_buffer, 1491 num_points * sizeof(short)); 1492 num_points = num_bytes / sizeof(short); 1493 1494 if (cmd->stop_src == TRIG_COUNT) 1495 devpriv->ao_count -= num_points; 1496 /* write data to board's fifo */ 1497 outsw(devpriv->ao_registers + DACDATA, devpriv->ao_buffer, num_bytes); 1498 1499 /* enable dac half-full and empty interrupts */ 1500 spin_lock_irqsave(&dev->spinlock, flags); 1501 devpriv->adc_fifo_bits |= DAEMIE | DAHFIE; 1502#ifdef CB_PCIDAS_DEBUG 1503 printk("comedi: adc_fifo_bits are 0x%x\n", devpriv->adc_fifo_bits); 1504#endif 1505 /* enable and clear interrupts */ 1506 outw(devpriv->adc_fifo_bits | DAEMI | DAHFI, 1507 devpriv->control_status + INT_ADCFIFO); 1508 1509 /* start dac */ 1510 devpriv->ao_control_bits |= DAC_START | DACEN | DAC_EMPTY; 1511 outw(devpriv->ao_control_bits, devpriv->control_status + DAC_CSR); 1512#ifdef CB_PCIDAS_DEBUG 1513 printk("comedi: sent 0x%x to dac control\n", devpriv->ao_control_bits); 1514#endif 1515 spin_unlock_irqrestore(&dev->spinlock, flags); 1516 1517 async->inttrig = NULL; 1518 1519 return 0; 1520} 1521 1522static irqreturn_t cb_pcidas_interrupt(int irq, void *d) 1523{ 1524 struct comedi_device *dev = (struct comedi_device *)d; 1525 struct comedi_subdevice *s = dev->read_subdev; 1526 struct comedi_async *async; 1527 int status, s5933_status; 1528 int half_fifo = thisboard->fifo_size / 2; 1529 unsigned int num_samples, i; 1530 static const int timeout = 10000; 1531 unsigned long flags; 1532 1533 if (dev->attached == 0) 1534 return IRQ_NONE; 1535 1536 async = s->async; 1537 async->events = 0; 1538 1539 s5933_status = inl(devpriv->s5933_config + AMCC_OP_REG_INTCSR); 1540#ifdef CB_PCIDAS_DEBUG 1541 printk("intcsr 0x%x\n", s5933_status); 1542 printk("mbef 0x%x\n", inl(devpriv->s5933_config + AMCC_OP_REG_MBEF)); 1543#endif 1544 1545 if ((INTCSR_INTR_ASSERTED & s5933_status) == 0) 1546 return IRQ_NONE; 1547 1548 /* make sure mailbox 4 is empty */ 1549 inl_p(devpriv->s5933_config + AMCC_OP_REG_IMB4); 1550 /* clear interrupt on amcc s5933 */ 1551 outl(devpriv->s5933_intcsr_bits | INTCSR_INBOX_INTR_STATUS, 1552 devpriv->s5933_config + AMCC_OP_REG_INTCSR); 1553 1554 status = inw(devpriv->control_status + INT_ADCFIFO); 1555#ifdef CB_PCIDAS_DEBUG 1556 if ((status & (INT | EOAI | LADFUL | DAHFI | DAEMI)) == 0) 1557 comedi_error(dev, "spurious interrupt"); 1558#endif 1559 1560 /* check for analog output interrupt */ 1561 if (status & (DAHFI | DAEMI)) 1562 handle_ao_interrupt(dev, status); 1563 /* check for analog input interrupts */ 1564 /* if fifo half-full */ 1565 if (status & ADHFI) { 1566 /* read data */ 1567 num_samples = half_fifo; 1568 if (async->cmd.stop_src == TRIG_COUNT && 1569 num_samples > devpriv->count) { 1570 num_samples = devpriv->count; 1571 } 1572 insw(devpriv->adc_fifo + ADCDATA, devpriv->ai_buffer, 1573 num_samples); 1574 cfc_write_array_to_buffer(s, devpriv->ai_buffer, 1575 num_samples * sizeof(short)); 1576 devpriv->count -= num_samples; 1577 if (async->cmd.stop_src == TRIG_COUNT && devpriv->count == 0) { 1578 async->events |= COMEDI_CB_EOA; 1579 cb_pcidas_cancel(dev, s); 1580 } 1581 /* clear half-full interrupt latch */ 1582 spin_lock_irqsave(&dev->spinlock, flags); 1583 outw(devpriv->adc_fifo_bits | INT, 1584 devpriv->control_status + INT_ADCFIFO); 1585 spin_unlock_irqrestore(&dev->spinlock, flags); 1586 /* else if fifo not empty */ 1587 } else if (status & (ADNEI | EOBI)) { 1588 for (i = 0; i < timeout; i++) { 1589 /* break if fifo is empty */ 1590 if ((ADNE & inw(devpriv->control_status + 1591 INT_ADCFIFO)) == 0) 1592 break; 1593 cfc_write_to_buffer(s, inw(devpriv->adc_fifo)); 1594 if (async->cmd.stop_src == TRIG_COUNT && --devpriv->count == 0) { /* end of acquisition */ 1595 cb_pcidas_cancel(dev, s); 1596 async->events |= COMEDI_CB_EOA; 1597 break; 1598 } 1599 } 1600 /* clear not-empty interrupt latch */ 1601 spin_lock_irqsave(&dev->spinlock, flags); 1602 outw(devpriv->adc_fifo_bits | INT, 1603 devpriv->control_status + INT_ADCFIFO); 1604 spin_unlock_irqrestore(&dev->spinlock, flags); 1605 } else if (status & EOAI) { 1606 comedi_error(dev, 1607 "bug! encountered end of aquisition interrupt?"); 1608 /* clear EOA interrupt latch */ 1609 spin_lock_irqsave(&dev->spinlock, flags); 1610 outw(devpriv->adc_fifo_bits | EOAI, 1611 devpriv->control_status + INT_ADCFIFO); 1612 spin_unlock_irqrestore(&dev->spinlock, flags); 1613 } 1614 /* check for fifo overflow */ 1615 if (status & LADFUL) { 1616 comedi_error(dev, "fifo overflow"); 1617 /* clear overflow interrupt latch */ 1618 spin_lock_irqsave(&dev->spinlock, flags); 1619 outw(devpriv->adc_fifo_bits | LADFUL, 1620 devpriv->control_status + INT_ADCFIFO); 1621 spin_unlock_irqrestore(&dev->spinlock, flags); 1622 cb_pcidas_cancel(dev, s); 1623 async->events |= COMEDI_CB_EOA | COMEDI_CB_ERROR; 1624 } 1625 1626 comedi_event(dev, s); 1627 1628 return IRQ_HANDLED; 1629} 1630 1631static void handle_ao_interrupt(struct comedi_device *dev, unsigned int status) 1632{ 1633 struct comedi_subdevice *s = dev->write_subdev; 1634 struct comedi_async *async = s->async; 1635 struct comedi_cmd *cmd = &async->cmd; 1636 unsigned int half_fifo = thisboard->fifo_size / 2; 1637 unsigned int num_points; 1638 unsigned long flags; 1639 1640 async->events = 0; 1641 1642 if (status & DAEMI) { 1643 /* clear dac empty interrupt latch */ 1644 spin_lock_irqsave(&dev->spinlock, flags); 1645 outw(devpriv->adc_fifo_bits | DAEMI, 1646 devpriv->control_status + INT_ADCFIFO); 1647 spin_unlock_irqrestore(&dev->spinlock, flags); 1648 if (inw(devpriv->ao_registers + DAC_CSR) & DAC_EMPTY) { 1649 if (cmd->stop_src == TRIG_NONE || 1650 (cmd->stop_src == TRIG_COUNT 1651 && devpriv->ao_count)) { 1652 comedi_error(dev, "dac fifo underflow"); 1653 cb_pcidas_ao_cancel(dev, s); 1654 async->events |= COMEDI_CB_ERROR; 1655 } 1656 async->events |= COMEDI_CB_EOA; 1657 } 1658 } else if (status & DAHFI) { 1659 unsigned int num_bytes; 1660 1661 /* figure out how many points we are writing to fifo */ 1662 num_points = half_fifo; 1663 if (cmd->stop_src == TRIG_COUNT && 1664 devpriv->ao_count < num_points) 1665 num_points = devpriv->ao_count; 1666 num_bytes = 1667 cfc_read_array_from_buffer(s, devpriv->ao_buffer, 1668 num_points * sizeof(short)); 1669 num_points = num_bytes / sizeof(short); 1670 1671 if (async->cmd.stop_src == TRIG_COUNT) 1672 devpriv->ao_count -= num_points; 1673 /* write data to board's fifo */ 1674 outsw(devpriv->ao_registers + DACDATA, devpriv->ao_buffer, 1675 num_points); 1676 /* clear half-full interrupt latch */ 1677 spin_lock_irqsave(&dev->spinlock, flags); 1678 outw(devpriv->adc_fifo_bits | DAHFI, 1679 devpriv->control_status + INT_ADCFIFO); 1680 spin_unlock_irqrestore(&dev->spinlock, flags); 1681 } 1682 1683 comedi_event(dev, s); 1684} 1685 1686/* cancel analog input command */ 1687static int cb_pcidas_cancel(struct comedi_device *dev, 1688 struct comedi_subdevice *s) 1689{ 1690 unsigned long flags; 1691 1692 spin_lock_irqsave(&dev->spinlock, flags); 1693 /* disable interrupts */ 1694 devpriv->adc_fifo_bits &= ~INTE & ~EOAIE; 1695 outw(devpriv->adc_fifo_bits, devpriv->control_status + INT_ADCFIFO); 1696 spin_unlock_irqrestore(&dev->spinlock, flags); 1697 1698 /* disable start trigger source and burst mode */ 1699 outw(0, devpriv->control_status + TRIG_CONTSTAT); 1700 /* software pacer source */ 1701 outw(0, devpriv->control_status + ADCMUX_CONT); 1702 1703 return 0; 1704} 1705 1706/* cancel analog output command */ 1707static int cb_pcidas_ao_cancel(struct comedi_device *dev, 1708 struct comedi_subdevice *s) 1709{ 1710 unsigned long flags; 1711 1712 spin_lock_irqsave(&dev->spinlock, flags); 1713 /* disable interrupts */ 1714 devpriv->adc_fifo_bits &= ~DAHFIE & ~DAEMIE; 1715 outw(devpriv->adc_fifo_bits, devpriv->control_status + INT_ADCFIFO); 1716 1717 /* disable output */ 1718 devpriv->ao_control_bits &= ~DACEN & ~DAC_PACER_MASK; 1719 outw(devpriv->ao_control_bits, devpriv->control_status + DAC_CSR); 1720 spin_unlock_irqrestore(&dev->spinlock, flags); 1721 1722 return 0; 1723} 1724 1725static void cb_pcidas_load_counters(struct comedi_device *dev, unsigned int *ns, 1726 int rounding_flags) 1727{ 1728 i8253_cascade_ns_to_timer_2div(TIMER_BASE, &(devpriv->divisor1), 1729 &(devpriv->divisor2), ns, 1730 rounding_flags & TRIG_ROUND_MASK); 1731 1732 /* Write the values of ctr1 and ctr2 into counters 1 and 2 */ 1733 i8254_load(devpriv->pacer_counter_dio + ADC8254, 0, 1, 1734 devpriv->divisor1, 2); 1735 i8254_load(devpriv->pacer_counter_dio + ADC8254, 0, 2, 1736 devpriv->divisor2, 2); 1737} 1738 1739static void write_calibration_bitstream(struct comedi_device *dev, 1740 unsigned int register_bits, 1741 unsigned int bitstream, 1742 unsigned int bitstream_length) 1743{ 1744 static const int write_delay = 1; 1745 unsigned int bit; 1746 1747 for (bit = 1 << (bitstream_length - 1); bit; bit >>= 1) { 1748 if (bitstream & bit) 1749 register_bits |= SERIAL_DATA_IN_BIT; 1750 else 1751 register_bits &= ~SERIAL_DATA_IN_BIT; 1752 udelay(write_delay); 1753 outw(register_bits, devpriv->control_status + CALIBRATION_REG); 1754 } 1755} 1756 1757static int caldac_8800_write(struct comedi_device *dev, unsigned int address, 1758 uint8_t value) 1759{ 1760 static const int num_caldac_channels = 8; 1761 static const int bitstream_length = 11; 1762 unsigned int bitstream = ((address & 0x7) << 8) | value; 1763 static const int caldac_8800_udelay = 1; 1764 1765 if (address >= num_caldac_channels) { 1766 comedi_error(dev, "illegal caldac channel"); 1767 return -1; 1768 } 1769 1770 if (value == devpriv->caldac_value[address]) 1771 return 1; 1772 1773 devpriv->caldac_value[address] = value; 1774 1775 write_calibration_bitstream(dev, cal_enable_bits(dev), bitstream, 1776 bitstream_length); 1777 1778 udelay(caldac_8800_udelay); 1779 outw(cal_enable_bits(dev) | SELECT_8800_BIT, 1780 devpriv->control_status + CALIBRATION_REG); 1781 udelay(caldac_8800_udelay); 1782 outw(cal_enable_bits(dev), devpriv->control_status + CALIBRATION_REG); 1783 1784 return 1; 1785} 1786 1787static int trimpot_7376_write(struct comedi_device *dev, uint8_t value) 1788{ 1789 static const int bitstream_length = 7; 1790 unsigned int bitstream = value & 0x7f; 1791 unsigned int register_bits; 1792 static const int ad7376_udelay = 1; 1793 1794 register_bits = cal_enable_bits(dev) | SELECT_TRIMPOT_BIT; 1795 udelay(ad7376_udelay); 1796 outw(register_bits, devpriv->control_status + CALIBRATION_REG); 1797 1798 write_calibration_bitstream(dev, register_bits, bitstream, 1799 bitstream_length); 1800 1801 udelay(ad7376_udelay); 1802 outw(cal_enable_bits(dev), devpriv->control_status + CALIBRATION_REG); 1803 1804 return 0; 1805} 1806 1807/* For 1602/16 only 1808 * ch 0 : adc gain 1809 * ch 1 : adc postgain offset */ 1810static int trimpot_8402_write(struct comedi_device *dev, unsigned int channel, 1811 uint8_t value) 1812{ 1813 static const int bitstream_length = 10; 1814 unsigned int bitstream = ((channel & 0x3) << 8) | (value & 0xff); 1815 unsigned int register_bits; 1816 static const int ad8402_udelay = 1; 1817 1818 register_bits = cal_enable_bits(dev) | SELECT_TRIMPOT_BIT; 1819 udelay(ad8402_udelay); 1820 outw(register_bits, devpriv->control_status + CALIBRATION_REG); 1821 1822 write_calibration_bitstream(dev, register_bits, bitstream, 1823 bitstream_length); 1824 1825 udelay(ad8402_udelay); 1826 outw(cal_enable_bits(dev), devpriv->control_status + CALIBRATION_REG); 1827 1828 return 0; 1829} 1830 1831static int wait_for_nvram_ready(unsigned long s5933_base_addr) 1832{ 1833 static const int timeout = 1000; 1834 unsigned int i; 1835 1836 for (i = 0; i < timeout; i++) { 1837 if ((inb(s5933_base_addr + 1838 AMCC_OP_REG_MCSR_NVCMD) & MCSR_NV_BUSY) 1839 == 0) 1840 return 0; 1841 udelay(1); 1842 } 1843 return -1; 1844} 1845 1846static int nvram_read(struct comedi_device *dev, unsigned int address, 1847 uint8_t *data) 1848{ 1849 unsigned long iobase = devpriv->s5933_config; 1850 1851 if (wait_for_nvram_ready(iobase) < 0) 1852 return -ETIMEDOUT; 1853 1854 outb(MCSR_NV_ENABLE | MCSR_NV_LOAD_LOW_ADDR, 1855 iobase + AMCC_OP_REG_MCSR_NVCMD); 1856 outb(address & 0xff, iobase + AMCC_OP_REG_MCSR_NVDATA); 1857 outb(MCSR_NV_ENABLE | MCSR_NV_LOAD_HIGH_ADDR, 1858 iobase + AMCC_OP_REG_MCSR_NVCMD); 1859 outb((address >> 8) & 0xff, iobase + AMCC_OP_REG_MCSR_NVDATA); 1860 outb(MCSR_NV_ENABLE | MCSR_NV_READ, iobase + AMCC_OP_REG_MCSR_NVCMD); 1861 1862 if (wait_for_nvram_ready(iobase) < 0) 1863 return -ETIMEDOUT; 1864 1865 *data = inb(iobase + AMCC_OP_REG_MCSR_NVDATA); 1866 1867 return 0; 1868} 1869 1870/* 1871 * A convenient macro that defines init_module() and cleanup_module(), 1872 * as necessary. 1873 */ 1874COMEDI_PCI_INITCLEANUP(driver_cb_pcidas, cb_pcidas_pci_table); 1875 1876MODULE_AUTHOR("Comedi http://www.comedi.org"); 1877MODULE_DESCRIPTION("Comedi low-level driver"); 1878MODULE_LICENSE("GPL"); 1879