nvec.c revision ebefae28cea729cb1fa9c944179f62d7dd65b10f
1/* 2 * NVEC: NVIDIA compliant embedded controller interface 3 * 4 * Copyright (C) 2011 The AC100 Kernel Team <ac100@lists.lauchpad.net> 5 * 6 * Authors: Pierre-Hugues Husson <phhusson@free.fr> 7 * Ilya Petrov <ilya.muromec@gmail.com> 8 * Marc Dietrich <marvin24@gmx.de> 9 * Julian Andres Klode <jak@jak-linux.org> 10 * 11 * This file is subject to the terms and conditions of the GNU General Public 12 * License. See the file "COPYING" in the main directory of this archive 13 * for more details. 14 * 15 */ 16 17/* #define DEBUG */ 18 19#include <linux/kernel.h> 20#include <linux/module.h> 21#include <linux/atomic.h> 22#include <linux/clk.h> 23#include <linux/completion.h> 24#include <linux/delay.h> 25#include <linux/err.h> 26#include <linux/gpio.h> 27#include <linux/interrupt.h> 28#include <linux/io.h> 29#include <linux/irq.h> 30#include <linux/of.h> 31#include <linux/of_gpio.h> 32#include <linux/list.h> 33#include <linux/mfd/core.h> 34#include <linux/mutex.h> 35#include <linux/notifier.h> 36#include <linux/platform_device.h> 37#include <linux/slab.h> 38#include <linux/spinlock.h> 39#include <linux/workqueue.h> 40 41#include <mach/clk.h> 42#include <mach/iomap.h> 43 44#include "nvec.h" 45 46#define I2C_CNFG 0x00 47#define I2C_CNFG_PACKET_MODE_EN (1<<10) 48#define I2C_CNFG_NEW_MASTER_SFM (1<<11) 49#define I2C_CNFG_DEBOUNCE_CNT_SHIFT 12 50 51#define I2C_SL_CNFG 0x20 52#define I2C_SL_NEWSL (1<<2) 53#define I2C_SL_NACK (1<<1) 54#define I2C_SL_RESP (1<<0) 55#define I2C_SL_IRQ (1<<3) 56#define END_TRANS (1<<4) 57#define RCVD (1<<2) 58#define RNW (1<<1) 59 60#define I2C_SL_RCVD 0x24 61#define I2C_SL_STATUS 0x28 62#define I2C_SL_ADDR1 0x2c 63#define I2C_SL_ADDR2 0x30 64#define I2C_SL_DELAY_COUNT 0x3c 65 66/** 67 * enum nvec_msg_category - Message categories for nvec_msg_alloc() 68 * @NVEC_MSG_RX: The message is an incoming message (from EC) 69 * @NVEC_MSG_TX: The message is an outgoing message (to EC) 70 */ 71enum nvec_msg_category { 72 NVEC_MSG_RX, 73 NVEC_MSG_TX, 74}; 75 76static const unsigned char EC_DISABLE_EVENT_REPORTING[3] = "\x04\x00\x00"; 77static const unsigned char EC_ENABLE_EVENT_REPORTING[3] = "\x04\x00\x01"; 78static const unsigned char EC_GET_FIRMWARE_VERSION[2] = "\x07\x15"; 79 80static struct nvec_chip *nvec_power_handle; 81 82static struct mfd_cell nvec_devices[] = { 83 { 84 .name = "nvec-kbd", 85 .id = 1, 86 }, 87 { 88 .name = "nvec-mouse", 89 .id = 1, 90 }, 91 { 92 .name = "nvec-power", 93 .id = 1, 94 }, 95 { 96 .name = "nvec-power", 97 .id = 2, 98 }, 99 { 100 .name = "nvec-leds", 101 .id = 1, 102 }, 103}; 104 105/** 106 * nvec_register_notifier - Register a notifier with nvec 107 * @nvec: A &struct nvec_chip 108 * @nb: The notifier block to register 109 * 110 * Registers a notifier with @nvec. The notifier will be added to an atomic 111 * notifier chain that is called for all received messages except those that 112 * correspond to a request initiated by nvec_write_sync(). 113 */ 114int nvec_register_notifier(struct nvec_chip *nvec, struct notifier_block *nb, 115 unsigned int events) 116{ 117 return atomic_notifier_chain_register(&nvec->notifier_list, nb); 118} 119EXPORT_SYMBOL_GPL(nvec_register_notifier); 120 121/** 122 * nvec_status_notifier - The final notifier 123 * 124 * Prints a message about control events not handled in the notifier 125 * chain. 126 */ 127static int nvec_status_notifier(struct notifier_block *nb, 128 unsigned long event_type, void *data) 129{ 130 struct nvec_chip *nvec = container_of(nb, struct nvec_chip, 131 nvec_status_notifier); 132 unsigned char *msg = (unsigned char *)data; 133 134 if (event_type != NVEC_CNTL) 135 return NOTIFY_DONE; 136 137 dev_warn(nvec->dev, "unhandled msg type %ld\n", event_type); 138 print_hex_dump(KERN_WARNING, "payload: ", DUMP_PREFIX_NONE, 16, 1, 139 msg, msg[1] + 2, true); 140 141 return NOTIFY_OK; 142} 143 144/** 145 * nvec_msg_alloc: 146 * @nvec: A &struct nvec_chip 147 * @category: Pool category, see &enum nvec_msg_category 148 * 149 * Allocate a single &struct nvec_msg object from the message pool of 150 * @nvec. The result shall be passed to nvec_msg_free() if no longer 151 * used. 152 * 153 * Outgoing messages are placed in the upper 75% of the pool, keeping the 154 * lower 25% available for RX buffers only. The reason is to prevent a 155 * situation where all buffers are full and a message is thus endlessly 156 * retried because the response could never be processed. 157 */ 158static struct nvec_msg *nvec_msg_alloc(struct nvec_chip *nvec, 159 enum nvec_msg_category category) 160{ 161 int i = (category == NVEC_MSG_TX) ? (NVEC_POOL_SIZE / 4) : 0; 162 163 for (; i < NVEC_POOL_SIZE; i++) { 164 if (atomic_xchg(&nvec->msg_pool[i].used, 1) == 0) { 165 dev_vdbg(nvec->dev, "INFO: Allocate %i\n", i); 166 return &nvec->msg_pool[i]; 167 } 168 } 169 170 dev_err(nvec->dev, "could not allocate %s buffer\n", 171 (category == NVEC_MSG_TX) ? "TX" : "RX"); 172 173 return NULL; 174} 175 176/** 177 * nvec_msg_free: 178 * @nvec: A &struct nvec_chip 179 * @msg: A message (must be allocated by nvec_msg_alloc() and belong to @nvec) 180 * 181 * Free the given message 182 */ 183inline void nvec_msg_free(struct nvec_chip *nvec, struct nvec_msg *msg) 184{ 185 if (msg != &nvec->tx_scratch) 186 dev_vdbg(nvec->dev, "INFO: Free %ti\n", msg - nvec->msg_pool); 187 atomic_set(&msg->used, 0); 188} 189EXPORT_SYMBOL_GPL(nvec_msg_free); 190 191/** 192 * nvec_msg_is_event - Return %true if @msg is an event 193 * @msg: A message 194 */ 195static bool nvec_msg_is_event(struct nvec_msg *msg) 196{ 197 return msg->data[0] >> 7; 198} 199 200/** 201 * nvec_msg_size - Get the size of a message 202 * @msg: The message to get the size for 203 * 204 * This only works for received messages, not for outgoing messages. 205 */ 206static size_t nvec_msg_size(struct nvec_msg *msg) 207{ 208 bool is_event = nvec_msg_is_event(msg); 209 int event_length = (msg->data[0] & 0x60) >> 5; 210 211 /* for variable size, payload size in byte 1 + count (1) + cmd (1) */ 212 if (!is_event || event_length == NVEC_VAR_SIZE) 213 return (msg->pos || msg->size) ? (msg->data[1] + 2) : 0; 214 else if (event_length == NVEC_2BYTES) 215 return 2; 216 else if (event_length == NVEC_3BYTES) 217 return 3; 218 else 219 return 0; 220} 221 222/** 223 * nvec_gpio_set_value - Set the GPIO value 224 * @nvec: A &struct nvec_chip 225 * @value: The value to write (0 or 1) 226 * 227 * Like gpio_set_value(), but generating debugging information 228 */ 229static void nvec_gpio_set_value(struct nvec_chip *nvec, int value) 230{ 231 dev_dbg(nvec->dev, "GPIO changed from %u to %u\n", 232 gpio_get_value(nvec->gpio), value); 233 gpio_set_value(nvec->gpio, value); 234} 235 236/** 237 * nvec_write_async - Asynchronously write a message to NVEC 238 * @nvec: An nvec_chip instance 239 * @data: The message data, starting with the request type 240 * @size: The size of @data 241 * 242 * Queue a single message to be transferred to the embedded controller 243 * and return immediately. 244 * 245 * Returns: 0 on success, a negative error code on failure. If a failure 246 * occured, the nvec driver may print an error. 247 */ 248int nvec_write_async(struct nvec_chip *nvec, const unsigned char *data, 249 short size) 250{ 251 struct nvec_msg *msg; 252 unsigned long flags; 253 254 msg = nvec_msg_alloc(nvec, NVEC_MSG_TX); 255 256 if (msg == NULL) 257 return -ENOMEM; 258 259 msg->data[0] = size; 260 memcpy(msg->data + 1, data, size); 261 msg->size = size + 1; 262 263 spin_lock_irqsave(&nvec->tx_lock, flags); 264 list_add_tail(&msg->node, &nvec->tx_data); 265 spin_unlock_irqrestore(&nvec->tx_lock, flags); 266 267 queue_work(nvec->wq, &nvec->tx_work); 268 269 return 0; 270} 271EXPORT_SYMBOL(nvec_write_async); 272 273/** 274 * nvec_write_sync - Write a message to nvec and read the response 275 * @nvec: An &struct nvec_chip 276 * @data: The data to write 277 * @size: The size of @data 278 * 279 * This is similar to nvec_write_async(), but waits for the 280 * request to be answered before returning. This function 281 * uses a mutex and can thus not be called from e.g. 282 * interrupt handlers. 283 * 284 * Returns: A pointer to the response message on success, 285 * %NULL on failure. Free with nvec_msg_free() once no longer 286 * used. 287 */ 288struct nvec_msg *nvec_write_sync(struct nvec_chip *nvec, 289 const unsigned char *data, short size) 290{ 291 struct nvec_msg *msg; 292 293 mutex_lock(&nvec->sync_write_mutex); 294 295 nvec->sync_write_pending = (data[1] << 8) + data[0]; 296 297 if (nvec_write_async(nvec, data, size) < 0) 298 return NULL; 299 300 dev_dbg(nvec->dev, "nvec_sync_write: 0x%04x\n", 301 nvec->sync_write_pending); 302 if (!(wait_for_completion_timeout(&nvec->sync_write, 303 msecs_to_jiffies(2000)))) { 304 dev_warn(nvec->dev, "timeout waiting for sync write to complete\n"); 305 mutex_unlock(&nvec->sync_write_mutex); 306 return NULL; 307 } 308 309 dev_dbg(nvec->dev, "nvec_sync_write: pong!\n"); 310 311 msg = nvec->last_sync_msg; 312 313 mutex_unlock(&nvec->sync_write_mutex); 314 315 return msg; 316} 317EXPORT_SYMBOL(nvec_write_sync); 318 319/** 320 * nvec_request_master - Process outgoing messages 321 * @work: A &struct work_struct (the tx_worker member of &struct nvec_chip) 322 * 323 * Processes all outgoing requests by sending the request and awaiting the 324 * response, then continuing with the next request. Once a request has a 325 * matching response, it will be freed and removed from the list. 326 */ 327static void nvec_request_master(struct work_struct *work) 328{ 329 struct nvec_chip *nvec = container_of(work, struct nvec_chip, tx_work); 330 unsigned long flags; 331 long err; 332 struct nvec_msg *msg; 333 334 spin_lock_irqsave(&nvec->tx_lock, flags); 335 while (!list_empty(&nvec->tx_data)) { 336 msg = list_first_entry(&nvec->tx_data, struct nvec_msg, node); 337 spin_unlock_irqrestore(&nvec->tx_lock, flags); 338 nvec_gpio_set_value(nvec, 0); 339 err = wait_for_completion_interruptible_timeout( 340 &nvec->ec_transfer, msecs_to_jiffies(5000)); 341 342 if (err == 0) { 343 dev_warn(nvec->dev, "timeout waiting for ec transfer\n"); 344 nvec_gpio_set_value(nvec, 1); 345 msg->pos = 0; 346 } 347 348 spin_lock_irqsave(&nvec->tx_lock, flags); 349 350 if (err > 0) { 351 list_del_init(&msg->node); 352 nvec_msg_free(nvec, msg); 353 } 354 } 355 spin_unlock_irqrestore(&nvec->tx_lock, flags); 356} 357 358/** 359 * parse_msg - Print some information and call the notifiers on an RX message 360 * @nvec: A &struct nvec_chip 361 * @msg: A message received by @nvec 362 * 363 * Paarse some pieces of the message and then call the chain of notifiers 364 * registered via nvec_register_notifier. 365 */ 366static int parse_msg(struct nvec_chip *nvec, struct nvec_msg *msg) 367{ 368 if ((msg->data[0] & 1 << 7) == 0 && msg->data[3]) { 369 dev_err(nvec->dev, "ec responded %02x %02x %02x %02x\n", 370 msg->data[0], msg->data[1], msg->data[2], msg->data[3]); 371 return -EINVAL; 372 } 373 374 if ((msg->data[0] >> 7) == 1 && (msg->data[0] & 0x0f) == 5) 375 print_hex_dump(KERN_WARNING, "ec system event ", 376 DUMP_PREFIX_NONE, 16, 1, msg->data, 377 msg->data[1] + 2, true); 378 379 atomic_notifier_call_chain(&nvec->notifier_list, msg->data[0] & 0x8f, 380 msg->data); 381 382 return 0; 383} 384 385/** 386 * nvec_dispatch - Process messages received from the EC 387 * @work: A &struct work_struct (the tx_worker member of &struct nvec_chip) 388 * 389 * Process messages previously received from the EC and put into the RX 390 * queue of the &struct nvec_chip instance associated with @work. 391 */ 392static void nvec_dispatch(struct work_struct *work) 393{ 394 struct nvec_chip *nvec = container_of(work, struct nvec_chip, rx_work); 395 unsigned long flags; 396 struct nvec_msg *msg; 397 398 spin_lock_irqsave(&nvec->rx_lock, flags); 399 while (!list_empty(&nvec->rx_data)) { 400 msg = list_first_entry(&nvec->rx_data, struct nvec_msg, node); 401 list_del_init(&msg->node); 402 spin_unlock_irqrestore(&nvec->rx_lock, flags); 403 404 if (nvec->sync_write_pending == 405 (msg->data[2] << 8) + msg->data[0]) { 406 dev_dbg(nvec->dev, "sync write completed!\n"); 407 nvec->sync_write_pending = 0; 408 nvec->last_sync_msg = msg; 409 complete(&nvec->sync_write); 410 } else { 411 parse_msg(nvec, msg); 412 nvec_msg_free(nvec, msg); 413 } 414 spin_lock_irqsave(&nvec->rx_lock, flags); 415 } 416 spin_unlock_irqrestore(&nvec->rx_lock, flags); 417} 418 419/** 420 * nvec_tx_completed - Complete the current transfer 421 * @nvec: A &struct nvec_chip 422 * 423 * This is called when we have received an END_TRANS on a TX transfer. 424 */ 425static void nvec_tx_completed(struct nvec_chip *nvec) 426{ 427 /* We got an END_TRANS, let's skip this, maybe there's an event */ 428 if (nvec->tx->pos != nvec->tx->size) { 429 dev_err(nvec->dev, "premature END_TRANS, resending\n"); 430 nvec->tx->pos = 0; 431 nvec_gpio_set_value(nvec, 0); 432 } else { 433 nvec->state = 0; 434 } 435} 436 437/** 438 * nvec_rx_completed - Complete the current transfer 439 * @nvec: A &struct nvec_chip 440 * 441 * This is called when we have received an END_TRANS on a RX transfer. 442 */ 443static void nvec_rx_completed(struct nvec_chip *nvec) 444{ 445 if (nvec->rx->pos != nvec_msg_size(nvec->rx)) { 446 dev_err(nvec->dev, "RX incomplete: Expected %u bytes, got %u\n", 447 (uint) nvec_msg_size(nvec->rx), 448 (uint) nvec->rx->pos); 449 450 nvec_msg_free(nvec, nvec->rx); 451 nvec->state = 0; 452 453 /* Battery quirk - Often incomplete, and likes to crash */ 454 if (nvec->rx->data[0] == NVEC_BAT) 455 complete(&nvec->ec_transfer); 456 457 return; 458 } 459 460 spin_lock(&nvec->rx_lock); 461 462 /* add the received data to the work list 463 and move the ring buffer pointer to the next entry */ 464 list_add_tail(&nvec->rx->node, &nvec->rx_data); 465 466 spin_unlock(&nvec->rx_lock); 467 468 nvec->state = 0; 469 470 if (!nvec_msg_is_event(nvec->rx)) 471 complete(&nvec->ec_transfer); 472 473 queue_work(nvec->wq, &nvec->rx_work); 474} 475 476/** 477 * nvec_invalid_flags - Send an error message about invalid flags and jump 478 * @nvec: The nvec device 479 * @status: The status flags 480 * @reset: Whether we shall jump to state 0. 481 */ 482static void nvec_invalid_flags(struct nvec_chip *nvec, unsigned int status, 483 bool reset) 484{ 485 dev_err(nvec->dev, "unexpected status flags 0x%02x during state %i\n", 486 status, nvec->state); 487 if (reset) 488 nvec->state = 0; 489} 490 491/** 492 * nvec_tx_set - Set the message to transfer (nvec->tx) 493 * @nvec: A &struct nvec_chip 494 * 495 * Gets the first entry from the tx_data list of @nvec and sets the 496 * tx member to it. If the tx_data list is empty, this uses the 497 * tx_scratch message to send a no operation message. 498 */ 499static void nvec_tx_set(struct nvec_chip *nvec) 500{ 501 spin_lock(&nvec->tx_lock); 502 if (list_empty(&nvec->tx_data)) { 503 dev_err(nvec->dev, "empty tx - sending no-op\n"); 504 memcpy(nvec->tx_scratch.data, "\x02\x07\x02", 3); 505 nvec->tx_scratch.size = 3; 506 nvec->tx_scratch.pos = 0; 507 nvec->tx = &nvec->tx_scratch; 508 list_add_tail(&nvec->tx->node, &nvec->tx_data); 509 } else { 510 nvec->tx = list_first_entry(&nvec->tx_data, struct nvec_msg, 511 node); 512 nvec->tx->pos = 0; 513 } 514 spin_unlock(&nvec->tx_lock); 515 516 dev_dbg(nvec->dev, "Sending message of length %u, command 0x%x\n", 517 (uint)nvec->tx->size, nvec->tx->data[1]); 518} 519 520/** 521 * nvec_interrupt - Interrupt handler 522 * @irq: The IRQ 523 * @dev: The nvec device 524 * 525 * Interrupt handler that fills our RX buffers and empties our TX 526 * buffers. This uses a finite state machine with ridiculous amounts 527 * of error checking, in order to be fairly reliable. 528 */ 529static irqreturn_t nvec_interrupt(int irq, void *dev) 530{ 531 unsigned long status; 532 unsigned int received = 0; 533 unsigned char to_send = 0xff; 534 const unsigned long irq_mask = I2C_SL_IRQ | END_TRANS | RCVD | RNW; 535 struct nvec_chip *nvec = dev; 536 unsigned int state = nvec->state; 537 538 status = readl(nvec->base + I2C_SL_STATUS); 539 540 /* Filter out some errors */ 541 if ((status & irq_mask) == 0 && (status & ~irq_mask) != 0) { 542 dev_err(nvec->dev, "unexpected irq mask %lx\n", status); 543 return IRQ_HANDLED; 544 } 545 if ((status & I2C_SL_IRQ) == 0) { 546 dev_err(nvec->dev, "Spurious IRQ\n"); 547 return IRQ_HANDLED; 548 } 549 550 /* The EC did not request a read, so it send us something, read it */ 551 if ((status & RNW) == 0) { 552 received = readl(nvec->base + I2C_SL_RCVD); 553 if (status & RCVD) 554 writel(0, nvec->base + I2C_SL_RCVD); 555 } 556 557 if (status == (I2C_SL_IRQ | RCVD)) 558 nvec->state = 0; 559 560 switch (nvec->state) { 561 case 0: /* Verify that its a transfer start, the rest later */ 562 if (status != (I2C_SL_IRQ | RCVD)) 563 nvec_invalid_flags(nvec, status, false); 564 break; 565 case 1: /* command byte */ 566 if (status != I2C_SL_IRQ) { 567 nvec_invalid_flags(nvec, status, true); 568 } else { 569 nvec->rx = nvec_msg_alloc(nvec, NVEC_MSG_RX); 570 /* Should not happen in a normal world */ 571 if (unlikely(nvec->rx == NULL)) { 572 nvec->state = 0; 573 break; 574 } 575 nvec->rx->data[0] = received; 576 nvec->rx->pos = 1; 577 nvec->state = 2; 578 } 579 break; 580 case 2: /* first byte after command */ 581 if (status == (I2C_SL_IRQ | RNW | RCVD)) { 582 udelay(33); 583 if (nvec->rx->data[0] != 0x01) { 584 dev_err(nvec->dev, 585 "Read without prior read command\n"); 586 nvec->state = 0; 587 break; 588 } 589 nvec_msg_free(nvec, nvec->rx); 590 nvec->state = 3; 591 nvec_tx_set(nvec); 592 BUG_ON(nvec->tx->size < 1); 593 to_send = nvec->tx->data[0]; 594 nvec->tx->pos = 1; 595 } else if (status == (I2C_SL_IRQ)) { 596 BUG_ON(nvec->rx == NULL); 597 nvec->rx->data[1] = received; 598 nvec->rx->pos = 2; 599 nvec->state = 4; 600 } else { 601 nvec_invalid_flags(nvec, status, true); 602 } 603 break; 604 case 3: /* EC does a block read, we transmit data */ 605 if (status & END_TRANS) { 606 nvec_tx_completed(nvec); 607 } else if ((status & RNW) == 0 || (status & RCVD)) { 608 nvec_invalid_flags(nvec, status, true); 609 } else if (nvec->tx && nvec->tx->pos < nvec->tx->size) { 610 to_send = nvec->tx->data[nvec->tx->pos++]; 611 } else { 612 dev_err(nvec->dev, "tx buffer underflow on %p (%u > %u)\n", 613 nvec->tx, 614 (uint) (nvec->tx ? nvec->tx->pos : 0), 615 (uint) (nvec->tx ? nvec->tx->size : 0)); 616 nvec->state = 0; 617 } 618 break; 619 case 4: /* EC does some write, we read the data */ 620 if ((status & (END_TRANS | RNW)) == END_TRANS) 621 nvec_rx_completed(nvec); 622 else if (status & (RNW | RCVD)) 623 nvec_invalid_flags(nvec, status, true); 624 else if (nvec->rx && nvec->rx->pos < NVEC_MSG_SIZE) 625 nvec->rx->data[nvec->rx->pos++] = received; 626 else 627 dev_err(nvec->dev, 628 "RX buffer overflow on %p: " 629 "Trying to write byte %u of %u\n", 630 nvec->rx, nvec->rx->pos, NVEC_MSG_SIZE); 631 break; 632 default: 633 nvec->state = 0; 634 } 635 636 /* If we are told that a new transfer starts, verify it */ 637 if ((status & (RCVD | RNW)) == RCVD) { 638 if (received != nvec->i2c_addr) 639 dev_err(nvec->dev, 640 "received address 0x%02x, expected 0x%02x\n", 641 received, nvec->i2c_addr); 642 nvec->state = 1; 643 } 644 645 /* Send data if requested, but not on end of transmission */ 646 if ((status & (RNW | END_TRANS)) == RNW) 647 writel(to_send, nvec->base + I2C_SL_RCVD); 648 649 /* If we have send the first byte */ 650 if (status == (I2C_SL_IRQ | RNW | RCVD)) 651 nvec_gpio_set_value(nvec, 1); 652 653 dev_dbg(nvec->dev, 654 "Handled: %s 0x%02x, %s 0x%02x in state %u [%s%s%s]\n", 655 (status & RNW) == 0 ? "received" : "R=", 656 received, 657 (status & (RNW | END_TRANS)) ? "sent" : "S=", 658 to_send, 659 state, 660 status & END_TRANS ? " END_TRANS" : "", 661 status & RCVD ? " RCVD" : "", 662 status & RNW ? " RNW" : ""); 663 664 665 /* 666 * TODO: A correct fix needs to be found for this. 667 * 668 * We experience less incomplete messages with this delay than without 669 * it, but we don't know why. Help is appreciated. 670 */ 671 udelay(100); 672 673 return IRQ_HANDLED; 674} 675 676static void tegra_init_i2c_slave(struct nvec_chip *nvec) 677{ 678 u32 val; 679 680 clk_enable(nvec->i2c_clk); 681 682 tegra_periph_reset_assert(nvec->i2c_clk); 683 udelay(2); 684 tegra_periph_reset_deassert(nvec->i2c_clk); 685 686 val = I2C_CNFG_NEW_MASTER_SFM | I2C_CNFG_PACKET_MODE_EN | 687 (0x2 << I2C_CNFG_DEBOUNCE_CNT_SHIFT); 688 writel(val, nvec->base + I2C_CNFG); 689 690 clk_set_rate(nvec->i2c_clk, 8 * 80000); 691 692 writel(I2C_SL_NEWSL, nvec->base + I2C_SL_CNFG); 693 writel(0x1E, nvec->base + I2C_SL_DELAY_COUNT); 694 695 writel(nvec->i2c_addr>>1, nvec->base + I2C_SL_ADDR1); 696 writel(0, nvec->base + I2C_SL_ADDR2); 697 698 enable_irq(nvec->irq); 699 700 clk_disable(nvec->i2c_clk); 701} 702 703#ifdef CONFIG_PM_SLEEP 704static void nvec_disable_i2c_slave(struct nvec_chip *nvec) 705{ 706 disable_irq(nvec->irq); 707 writel(I2C_SL_NEWSL | I2C_SL_NACK, nvec->base + I2C_SL_CNFG); 708 clk_disable(nvec->i2c_clk); 709} 710#endif 711 712static void nvec_power_off(void) 713{ 714 nvec_write_async(nvec_power_handle, EC_DISABLE_EVENT_REPORTING, 3); 715 nvec_write_async(nvec_power_handle, "\x04\x01", 2); 716} 717 718static int __devinit tegra_nvec_probe(struct platform_device *pdev) 719{ 720 int err, ret; 721 struct clk *i2c_clk; 722 struct nvec_platform_data *pdata = pdev->dev.platform_data; 723 struct nvec_chip *nvec; 724 struct nvec_msg *msg; 725 struct resource *res; 726 void __iomem *base; 727 728 nvec = devm_kzalloc(&pdev->dev, sizeof(struct nvec_chip), GFP_KERNEL); 729 if (nvec == NULL) { 730 dev_err(&pdev->dev, "failed to reserve memory\n"); 731 return -ENOMEM; 732 } 733 platform_set_drvdata(pdev, nvec); 734 nvec->dev = &pdev->dev; 735 736 if (pdata) { 737 nvec->gpio = pdata->gpio; 738 nvec->i2c_addr = pdata->i2c_addr; 739 } else if (nvec->dev->of_node) { 740 nvec->gpio = of_get_named_gpio(nvec->dev->of_node, "request-gpios", 0); 741 if (nvec->gpio < 0) { 742 dev_err(&pdev->dev, "no gpio specified"); 743 return -ENODEV; 744 } 745 if (of_property_read_u32(nvec->dev->of_node, "slave-addr", &nvec->i2c_addr)) { 746 dev_err(&pdev->dev, "no i2c address specified"); 747 return -ENODEV; 748 } 749 } else { 750 dev_err(&pdev->dev, "no platform data\n"); 751 return -ENODEV; 752 } 753 754 res = platform_get_resource(pdev, IORESOURCE_MEM, 0); 755 if (!res) { 756 dev_err(&pdev->dev, "no mem resource?\n"); 757 return -ENODEV; 758 } 759 760 base = devm_request_and_ioremap(&pdev->dev, res); 761 if (!base) { 762 dev_err(&pdev->dev, "Can't ioremap I2C region\n"); 763 return -ENOMEM; 764 } 765 766 res = platform_get_resource(pdev, IORESOURCE_IRQ, 0); 767 if (!res) { 768 dev_err(&pdev->dev, "no irq resource?\n"); 769 return -ENODEV; 770 } 771 772 i2c_clk = clk_get_sys("tegra-i2c.2", NULL); 773 if (IS_ERR(i2c_clk)) { 774 dev_err(nvec->dev, "failed to get controller clock\n"); 775 return -ENODEV; 776 } 777 778 nvec->base = base; 779 nvec->irq = res->start; 780 nvec->i2c_clk = i2c_clk; 781 nvec->rx = &nvec->msg_pool[0]; 782 783 ATOMIC_INIT_NOTIFIER_HEAD(&nvec->notifier_list); 784 785 init_completion(&nvec->sync_write); 786 init_completion(&nvec->ec_transfer); 787 mutex_init(&nvec->sync_write_mutex); 788 spin_lock_init(&nvec->tx_lock); 789 spin_lock_init(&nvec->rx_lock); 790 INIT_LIST_HEAD(&nvec->rx_data); 791 INIT_LIST_HEAD(&nvec->tx_data); 792 INIT_WORK(&nvec->rx_work, nvec_dispatch); 793 INIT_WORK(&nvec->tx_work, nvec_request_master); 794 nvec->wq = alloc_workqueue("nvec", WQ_NON_REENTRANT, 2); 795 796 err = devm_gpio_request_one(&pdev->dev, nvec->gpio, GPIOF_OUT_INIT_HIGH, 797 "nvec gpio"); 798 if (err < 0) { 799 dev_err(nvec->dev, "couldn't request gpio\n"); 800 destroy_workqueue(nvec->wq); 801 return -ENODEV; 802 } 803 804 err = devm_request_irq(&pdev->dev, nvec->irq, nvec_interrupt, 0, 805 "nvec", nvec); 806 if (err) { 807 dev_err(nvec->dev, "couldn't request irq\n"); 808 destroy_workqueue(nvec->wq); 809 return -ENODEV; 810 } 811 disable_irq(nvec->irq); 812 813 tegra_init_i2c_slave(nvec); 814 815 clk_enable(i2c_clk); 816 817 818 /* enable event reporting */ 819 nvec_write_async(nvec, EC_ENABLE_EVENT_REPORTING, 820 sizeof(EC_ENABLE_EVENT_REPORTING)); 821 822 nvec->nvec_status_notifier.notifier_call = nvec_status_notifier; 823 nvec_register_notifier(nvec, &nvec->nvec_status_notifier, 0); 824 825 nvec_power_handle = nvec; 826 pm_power_off = nvec_power_off; 827 828 /* Get Firmware Version */ 829 msg = nvec_write_sync(nvec, EC_GET_FIRMWARE_VERSION, 830 sizeof(EC_GET_FIRMWARE_VERSION)); 831 832 if (msg) { 833 dev_warn(nvec->dev, "ec firmware version %02x.%02x.%02x / %02x\n", 834 msg->data[4], msg->data[5], msg->data[6], msg->data[7]); 835 836 nvec_msg_free(nvec, msg); 837 } 838 839 ret = mfd_add_devices(nvec->dev, -1, nvec_devices, 840 ARRAY_SIZE(nvec_devices), base, 0); 841 if (ret) 842 dev_err(nvec->dev, "error adding subdevices\n"); 843 844 /* unmute speakers? */ 845 nvec_write_async(nvec, "\x0d\x10\x59\x95", 4); 846 847 /* enable lid switch event */ 848 nvec_write_async(nvec, "\x01\x01\x01\x00\x00\x02\x00", 7); 849 850 /* enable power button event */ 851 nvec_write_async(nvec, "\x01\x01\x01\x00\x00\x80\x00", 7); 852 853 return 0; 854} 855 856static int __devexit tegra_nvec_remove(struct platform_device *pdev) 857{ 858 struct nvec_chip *nvec = platform_get_drvdata(pdev); 859 860 nvec_write_async(nvec, EC_DISABLE_EVENT_REPORTING, 3); 861 mfd_remove_devices(nvec->dev); 862 destroy_workqueue(nvec->wq); 863 864 return 0; 865} 866 867#ifdef CONFIG_PM_SLEEP 868static int nvec_suspend(struct device *dev) 869{ 870 struct platform_device *pdev = to_platform_device(dev); 871 struct nvec_chip *nvec = platform_get_drvdata(pdev); 872 struct nvec_msg *msg; 873 874 dev_dbg(nvec->dev, "suspending\n"); 875 876 /* keep these sync or you'll break suspend */ 877 msg = nvec_write_sync(nvec, EC_DISABLE_EVENT_REPORTING, 3); 878 nvec_msg_free(nvec, msg); 879 msg = nvec_write_sync(nvec, "\x04\x02", 2); 880 nvec_msg_free(nvec, msg); 881 882 nvec_disable_i2c_slave(nvec); 883 884 return 0; 885} 886 887static int nvec_resume(struct device *dev) 888{ 889 struct platform_device *pdev = to_platform_device(dev); 890 struct nvec_chip *nvec = platform_get_drvdata(pdev); 891 892 dev_dbg(nvec->dev, "resuming\n"); 893 tegra_init_i2c_slave(nvec); 894 nvec_write_async(nvec, EC_ENABLE_EVENT_REPORTING, 3); 895 896 return 0; 897} 898#endif 899 900static const SIMPLE_DEV_PM_OPS(nvec_pm_ops, nvec_suspend, nvec_resume); 901 902/* Match table for of_platform binding */ 903static const struct of_device_id nvidia_nvec_of_match[] __devinitconst = { 904 { .compatible = "nvidia,nvec", }, 905 {}, 906}; 907MODULE_DEVICE_TABLE(of, nvidia_nvec_of_match); 908 909static struct platform_driver nvec_device_driver = { 910 .probe = tegra_nvec_probe, 911 .remove = __devexit_p(tegra_nvec_remove), 912 .driver = { 913 .name = "nvec", 914 .owner = THIS_MODULE, 915 .pm = &nvec_pm_ops, 916 .of_match_table = nvidia_nvec_of_match, 917 } 918}; 919 920module_platform_driver(nvec_device_driver); 921 922MODULE_ALIAS("platform:nvec"); 923MODULE_DESCRIPTION("NVIDIA compliant embedded controller interface"); 924MODULE_AUTHOR("Marc Dietrich <marvin24@gmx.de>"); 925MODULE_LICENSE("GPL"); 926