1/*
2 * f_acm.c -- USB CDC serial (ACM) function driver
3 *
4 * Copyright (C) 2003 Al Borchers (alborchers@steinerpoint.com)
5 * Copyright (C) 2008 by David Brownell
6 * Copyright (C) 2008 by Nokia Corporation
7 * Copyright (C) 2009 by Samsung Electronics
8 * Author: Michal Nazarewicz (mina86@mina86.com)
9 *
10 * This software is distributed under the terms of the GNU General
11 * Public License ("GPL") as published by the Free Software Foundation,
12 * either version 2 of that License or (at your option) any later version.
13 */
14
15/* #define VERBOSE_DEBUG */
16
17#include <linux/slab.h>
18#include <linux/kernel.h>
19#include <linux/module.h>
20#include <linux/device.h>
21#include <linux/err.h>
22
23#include "u_serial.h"
24#include "gadget_chips.h"
25
26
27/*
28 * This CDC ACM function support just wraps control functions and
29 * notifications around the generic serial-over-usb code.
30 *
31 * Because CDC ACM is standardized by the USB-IF, many host operating
32 * systems have drivers for it.  Accordingly, ACM is the preferred
33 * interop solution for serial-port type connections.  The control
34 * models are often not necessary, and in any case don't do much in
35 * this bare-bones implementation.
36 *
37 * Note that even MS-Windows has some support for ACM.  However, that
38 * support is somewhat broken because when you use ACM in a composite
39 * device, having multiple interfaces confuses the poor OS.  It doesn't
40 * seem to understand CDC Union descriptors.  The new "association"
41 * descriptors (roughly equivalent to CDC Unions) may sometimes help.
42 */
43
44struct f_acm {
45	struct gserial			port;
46	u8				ctrl_id, data_id;
47	u8				port_num;
48
49	u8				pending;
50
51	/* lock is mostly for pending and notify_req ... they get accessed
52	 * by callbacks both from tty (open/close/break) under its spinlock,
53	 * and notify_req.complete() which can't use that lock.
54	 */
55	spinlock_t			lock;
56
57	struct usb_ep			*notify;
58	struct usb_request		*notify_req;
59
60	struct usb_cdc_line_coding	port_line_coding;	/* 8-N-1 etc */
61
62	/* SetControlLineState request -- CDC 1.1 section 6.2.14 (INPUT) */
63	u16				port_handshake_bits;
64#define ACM_CTRL_RTS	(1 << 1)	/* unused with full duplex */
65#define ACM_CTRL_DTR	(1 << 0)	/* host is ready for data r/w */
66
67	/* SerialState notification -- CDC 1.1 section 6.3.5 (OUTPUT) */
68	u16				serial_state;
69#define ACM_CTRL_OVERRUN	(1 << 6)
70#define ACM_CTRL_PARITY		(1 << 5)
71#define ACM_CTRL_FRAMING	(1 << 4)
72#define ACM_CTRL_RI		(1 << 3)
73#define ACM_CTRL_BRK		(1 << 2)
74#define ACM_CTRL_DSR		(1 << 1)
75#define ACM_CTRL_DCD		(1 << 0)
76};
77
78static inline struct f_acm *func_to_acm(struct usb_function *f)
79{
80	return container_of(f, struct f_acm, port.func);
81}
82
83static inline struct f_acm *port_to_acm(struct gserial *p)
84{
85	return container_of(p, struct f_acm, port);
86}
87
88/*-------------------------------------------------------------------------*/
89
90/* notification endpoint uses smallish and infrequent fixed-size messages */
91
92#define GS_NOTIFY_INTERVAL_MS		32
93#define GS_NOTIFY_MAXPACKET		10	/* notification + 2 bytes */
94
95/* interface and class descriptors: */
96
97static struct usb_interface_assoc_descriptor
98acm_iad_descriptor = {
99	.bLength =		sizeof acm_iad_descriptor,
100	.bDescriptorType =	USB_DT_INTERFACE_ASSOCIATION,
101
102	/* .bFirstInterface =	DYNAMIC, */
103	.bInterfaceCount = 	2,	// control + data
104	.bFunctionClass =	USB_CLASS_COMM,
105	.bFunctionSubClass =	USB_CDC_SUBCLASS_ACM,
106	.bFunctionProtocol =	USB_CDC_ACM_PROTO_AT_V25TER,
107	/* .iFunction =		DYNAMIC */
108};
109
110
111static struct usb_interface_descriptor acm_control_interface_desc = {
112	.bLength =		USB_DT_INTERFACE_SIZE,
113	.bDescriptorType =	USB_DT_INTERFACE,
114	/* .bInterfaceNumber = DYNAMIC */
115	.bNumEndpoints =	1,
116	.bInterfaceClass =	USB_CLASS_COMM,
117	.bInterfaceSubClass =	USB_CDC_SUBCLASS_ACM,
118	.bInterfaceProtocol =	USB_CDC_ACM_PROTO_AT_V25TER,
119	/* .iInterface = DYNAMIC */
120};
121
122static struct usb_interface_descriptor acm_data_interface_desc = {
123	.bLength =		USB_DT_INTERFACE_SIZE,
124	.bDescriptorType =	USB_DT_INTERFACE,
125	/* .bInterfaceNumber = DYNAMIC */
126	.bNumEndpoints =	2,
127	.bInterfaceClass =	USB_CLASS_CDC_DATA,
128	.bInterfaceSubClass =	0,
129	.bInterfaceProtocol =	0,
130	/* .iInterface = DYNAMIC */
131};
132
133static struct usb_cdc_header_desc acm_header_desc = {
134	.bLength =		sizeof(acm_header_desc),
135	.bDescriptorType =	USB_DT_CS_INTERFACE,
136	.bDescriptorSubType =	USB_CDC_HEADER_TYPE,
137	.bcdCDC =		cpu_to_le16(0x0110),
138};
139
140static struct usb_cdc_call_mgmt_descriptor
141acm_call_mgmt_descriptor = {
142	.bLength =		sizeof(acm_call_mgmt_descriptor),
143	.bDescriptorType =	USB_DT_CS_INTERFACE,
144	.bDescriptorSubType =	USB_CDC_CALL_MANAGEMENT_TYPE,
145	.bmCapabilities =	0,
146	/* .bDataInterface = DYNAMIC */
147};
148
149static struct usb_cdc_acm_descriptor acm_descriptor = {
150	.bLength =		sizeof(acm_descriptor),
151	.bDescriptorType =	USB_DT_CS_INTERFACE,
152	.bDescriptorSubType =	USB_CDC_ACM_TYPE,
153	.bmCapabilities =	USB_CDC_CAP_LINE,
154};
155
156static struct usb_cdc_union_desc acm_union_desc = {
157	.bLength =		sizeof(acm_union_desc),
158	.bDescriptorType =	USB_DT_CS_INTERFACE,
159	.bDescriptorSubType =	USB_CDC_UNION_TYPE,
160	/* .bMasterInterface0 =	DYNAMIC */
161	/* .bSlaveInterface0 =	DYNAMIC */
162};
163
164/* full speed support: */
165
166static struct usb_endpoint_descriptor acm_fs_notify_desc = {
167	.bLength =		USB_DT_ENDPOINT_SIZE,
168	.bDescriptorType =	USB_DT_ENDPOINT,
169	.bEndpointAddress =	USB_DIR_IN,
170	.bmAttributes =		USB_ENDPOINT_XFER_INT,
171	.wMaxPacketSize =	cpu_to_le16(GS_NOTIFY_MAXPACKET),
172	.bInterval =		GS_NOTIFY_INTERVAL_MS,
173};
174
175static struct usb_endpoint_descriptor acm_fs_in_desc = {
176	.bLength =		USB_DT_ENDPOINT_SIZE,
177	.bDescriptorType =	USB_DT_ENDPOINT,
178	.bEndpointAddress =	USB_DIR_IN,
179	.bmAttributes =		USB_ENDPOINT_XFER_BULK,
180};
181
182static struct usb_endpoint_descriptor acm_fs_out_desc = {
183	.bLength =		USB_DT_ENDPOINT_SIZE,
184	.bDescriptorType =	USB_DT_ENDPOINT,
185	.bEndpointAddress =	USB_DIR_OUT,
186	.bmAttributes =		USB_ENDPOINT_XFER_BULK,
187};
188
189static struct usb_descriptor_header *acm_fs_function[] = {
190	(struct usb_descriptor_header *) &acm_iad_descriptor,
191	(struct usb_descriptor_header *) &acm_control_interface_desc,
192	(struct usb_descriptor_header *) &acm_header_desc,
193	(struct usb_descriptor_header *) &acm_call_mgmt_descriptor,
194	(struct usb_descriptor_header *) &acm_descriptor,
195	(struct usb_descriptor_header *) &acm_union_desc,
196	(struct usb_descriptor_header *) &acm_fs_notify_desc,
197	(struct usb_descriptor_header *) &acm_data_interface_desc,
198	(struct usb_descriptor_header *) &acm_fs_in_desc,
199	(struct usb_descriptor_header *) &acm_fs_out_desc,
200	NULL,
201};
202
203/* high speed support: */
204static struct usb_endpoint_descriptor acm_hs_notify_desc = {
205	.bLength =		USB_DT_ENDPOINT_SIZE,
206	.bDescriptorType =	USB_DT_ENDPOINT,
207	.bEndpointAddress =	USB_DIR_IN,
208	.bmAttributes =		USB_ENDPOINT_XFER_INT,
209	.wMaxPacketSize =	cpu_to_le16(GS_NOTIFY_MAXPACKET),
210	.bInterval =		USB_MS_TO_HS_INTERVAL(GS_NOTIFY_INTERVAL_MS),
211};
212
213static struct usb_endpoint_descriptor acm_hs_in_desc = {
214	.bLength =		USB_DT_ENDPOINT_SIZE,
215	.bDescriptorType =	USB_DT_ENDPOINT,
216	.bmAttributes =		USB_ENDPOINT_XFER_BULK,
217	.wMaxPacketSize =	cpu_to_le16(512),
218};
219
220static struct usb_endpoint_descriptor acm_hs_out_desc = {
221	.bLength =		USB_DT_ENDPOINT_SIZE,
222	.bDescriptorType =	USB_DT_ENDPOINT,
223	.bmAttributes =		USB_ENDPOINT_XFER_BULK,
224	.wMaxPacketSize =	cpu_to_le16(512),
225};
226
227static struct usb_descriptor_header *acm_hs_function[] = {
228	(struct usb_descriptor_header *) &acm_iad_descriptor,
229	(struct usb_descriptor_header *) &acm_control_interface_desc,
230	(struct usb_descriptor_header *) &acm_header_desc,
231	(struct usb_descriptor_header *) &acm_call_mgmt_descriptor,
232	(struct usb_descriptor_header *) &acm_descriptor,
233	(struct usb_descriptor_header *) &acm_union_desc,
234	(struct usb_descriptor_header *) &acm_hs_notify_desc,
235	(struct usb_descriptor_header *) &acm_data_interface_desc,
236	(struct usb_descriptor_header *) &acm_hs_in_desc,
237	(struct usb_descriptor_header *) &acm_hs_out_desc,
238	NULL,
239};
240
241static struct usb_endpoint_descriptor acm_ss_in_desc = {
242	.bLength =		USB_DT_ENDPOINT_SIZE,
243	.bDescriptorType =	USB_DT_ENDPOINT,
244	.bmAttributes =		USB_ENDPOINT_XFER_BULK,
245	.wMaxPacketSize =	cpu_to_le16(1024),
246};
247
248static struct usb_endpoint_descriptor acm_ss_out_desc = {
249	.bLength =		USB_DT_ENDPOINT_SIZE,
250	.bDescriptorType =	USB_DT_ENDPOINT,
251	.bmAttributes =		USB_ENDPOINT_XFER_BULK,
252	.wMaxPacketSize =	cpu_to_le16(1024),
253};
254
255static struct usb_ss_ep_comp_descriptor acm_ss_bulk_comp_desc = {
256	.bLength =              sizeof acm_ss_bulk_comp_desc,
257	.bDescriptorType =      USB_DT_SS_ENDPOINT_COMP,
258};
259
260static struct usb_descriptor_header *acm_ss_function[] = {
261	(struct usb_descriptor_header *) &acm_iad_descriptor,
262	(struct usb_descriptor_header *) &acm_control_interface_desc,
263	(struct usb_descriptor_header *) &acm_header_desc,
264	(struct usb_descriptor_header *) &acm_call_mgmt_descriptor,
265	(struct usb_descriptor_header *) &acm_descriptor,
266	(struct usb_descriptor_header *) &acm_union_desc,
267	(struct usb_descriptor_header *) &acm_hs_notify_desc,
268	(struct usb_descriptor_header *) &acm_ss_bulk_comp_desc,
269	(struct usb_descriptor_header *) &acm_data_interface_desc,
270	(struct usb_descriptor_header *) &acm_ss_in_desc,
271	(struct usb_descriptor_header *) &acm_ss_bulk_comp_desc,
272	(struct usb_descriptor_header *) &acm_ss_out_desc,
273	(struct usb_descriptor_header *) &acm_ss_bulk_comp_desc,
274	NULL,
275};
276
277/* string descriptors: */
278
279#define ACM_CTRL_IDX	0
280#define ACM_DATA_IDX	1
281#define ACM_IAD_IDX	2
282
283/* static strings, in UTF-8 */
284static struct usb_string acm_string_defs[] = {
285	[ACM_CTRL_IDX].s = "CDC Abstract Control Model (ACM)",
286	[ACM_DATA_IDX].s = "CDC ACM Data",
287	[ACM_IAD_IDX ].s = "CDC Serial",
288	{  } /* end of list */
289};
290
291static struct usb_gadget_strings acm_string_table = {
292	.language =		0x0409,	/* en-us */
293	.strings =		acm_string_defs,
294};
295
296static struct usb_gadget_strings *acm_strings[] = {
297	&acm_string_table,
298	NULL,
299};
300
301/*-------------------------------------------------------------------------*/
302
303/* ACM control ... data handling is delegated to tty library code.
304 * The main task of this function is to activate and deactivate
305 * that code based on device state; track parameters like line
306 * speed, handshake state, and so on; and issue notifications.
307 */
308
309static void acm_complete_set_line_coding(struct usb_ep *ep,
310		struct usb_request *req)
311{
312	struct f_acm	*acm = ep->driver_data;
313	struct usb_composite_dev *cdev = acm->port.func.config->cdev;
314
315	if (req->status != 0) {
316		dev_dbg(&cdev->gadget->dev, "acm ttyGS%d completion, err %d\n",
317			acm->port_num, req->status);
318		return;
319	}
320
321	/* normal completion */
322	if (req->actual != sizeof(acm->port_line_coding)) {
323		dev_dbg(&cdev->gadget->dev, "acm ttyGS%d short resp, len %d\n",
324			acm->port_num, req->actual);
325		usb_ep_set_halt(ep);
326	} else {
327		struct usb_cdc_line_coding	*value = req->buf;
328
329		/* REVISIT:  we currently just remember this data.
330		 * If we change that, (a) validate it first, then
331		 * (b) update whatever hardware needs updating,
332		 * (c) worry about locking.  This is information on
333		 * the order of 9600-8-N-1 ... most of which means
334		 * nothing unless we control a real RS232 line.
335		 */
336		acm->port_line_coding = *value;
337	}
338}
339
340static int acm_setup(struct usb_function *f, const struct usb_ctrlrequest *ctrl)
341{
342	struct f_acm		*acm = func_to_acm(f);
343	struct usb_composite_dev *cdev = f->config->cdev;
344	struct usb_request	*req = cdev->req;
345	int			value = -EOPNOTSUPP;
346	u16			w_index = le16_to_cpu(ctrl->wIndex);
347	u16			w_value = le16_to_cpu(ctrl->wValue);
348	u16			w_length = le16_to_cpu(ctrl->wLength);
349
350	/* composite driver infrastructure handles everything except
351	 * CDC class messages; interface activation uses set_alt().
352	 *
353	 * Note CDC spec table 4 lists the ACM request profile.  It requires
354	 * encapsulated command support ... we don't handle any, and respond
355	 * to them by stalling.  Options include get/set/clear comm features
356	 * (not that useful) and SEND_BREAK.
357	 */
358	switch ((ctrl->bRequestType << 8) | ctrl->bRequest) {
359
360	/* SET_LINE_CODING ... just read and save what the host sends */
361	case ((USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE) << 8)
362			| USB_CDC_REQ_SET_LINE_CODING:
363		if (w_length != sizeof(struct usb_cdc_line_coding)
364				|| w_index != acm->ctrl_id)
365			goto invalid;
366
367		value = w_length;
368		cdev->gadget->ep0->driver_data = acm;
369		req->complete = acm_complete_set_line_coding;
370		break;
371
372	/* GET_LINE_CODING ... return what host sent, or initial value */
373	case ((USB_DIR_IN | USB_TYPE_CLASS | USB_RECIP_INTERFACE) << 8)
374			| USB_CDC_REQ_GET_LINE_CODING:
375		if (w_index != acm->ctrl_id)
376			goto invalid;
377
378		value = min_t(unsigned, w_length,
379				sizeof(struct usb_cdc_line_coding));
380		memcpy(req->buf, &acm->port_line_coding, value);
381		break;
382
383	/* SET_CONTROL_LINE_STATE ... save what the host sent */
384	case ((USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE) << 8)
385			| USB_CDC_REQ_SET_CONTROL_LINE_STATE:
386		if (w_index != acm->ctrl_id)
387			goto invalid;
388
389		value = 0;
390
391		/* FIXME we should not allow data to flow until the
392		 * host sets the ACM_CTRL_DTR bit; and when it clears
393		 * that bit, we should return to that no-flow state.
394		 */
395		acm->port_handshake_bits = w_value;
396		break;
397
398	default:
399invalid:
400		dev_vdbg(&cdev->gadget->dev,
401			 "invalid control req%02x.%02x v%04x i%04x l%d\n",
402			 ctrl->bRequestType, ctrl->bRequest,
403			 w_value, w_index, w_length);
404	}
405
406	/* respond with data transfer or status phase? */
407	if (value >= 0) {
408		dev_dbg(&cdev->gadget->dev,
409			"acm ttyGS%d req%02x.%02x v%04x i%04x l%d\n",
410			acm->port_num, ctrl->bRequestType, ctrl->bRequest,
411			w_value, w_index, w_length);
412		req->zero = 0;
413		req->length = value;
414		value = usb_ep_queue(cdev->gadget->ep0, req, GFP_ATOMIC);
415		if (value < 0)
416			ERROR(cdev, "acm response on ttyGS%d, err %d\n",
417					acm->port_num, value);
418	}
419
420	/* device either stalls (value < 0) or reports success */
421	return value;
422}
423
424static int acm_set_alt(struct usb_function *f, unsigned intf, unsigned alt)
425{
426	struct f_acm		*acm = func_to_acm(f);
427	struct usb_composite_dev *cdev = f->config->cdev;
428
429	/* we know alt == 0, so this is an activation or a reset */
430
431	if (intf == acm->ctrl_id) {
432		if (acm->notify->driver_data) {
433			dev_vdbg(&cdev->gadget->dev,
434				 "reset acm control interface %d\n", intf);
435			usb_ep_disable(acm->notify);
436		}
437
438		if (!acm->notify->desc)
439			if (config_ep_by_speed(cdev->gadget, f, acm->notify))
440				return -EINVAL;
441
442		usb_ep_enable(acm->notify);
443		acm->notify->driver_data = acm;
444
445	} else if (intf == acm->data_id) {
446		if (acm->port.in->driver_data) {
447			dev_dbg(&cdev->gadget->dev,
448				"reset acm ttyGS%d\n", acm->port_num);
449			gserial_disconnect(&acm->port);
450		}
451		if (!acm->port.in->desc || !acm->port.out->desc) {
452			dev_dbg(&cdev->gadget->dev,
453				"activate acm ttyGS%d\n", acm->port_num);
454			if (config_ep_by_speed(cdev->gadget, f,
455					       acm->port.in) ||
456			    config_ep_by_speed(cdev->gadget, f,
457					       acm->port.out)) {
458				acm->port.in->desc = NULL;
459				acm->port.out->desc = NULL;
460				return -EINVAL;
461			}
462		}
463		gserial_connect(&acm->port, acm->port_num);
464
465	} else
466		return -EINVAL;
467
468	return 0;
469}
470
471static void acm_disable(struct usb_function *f)
472{
473	struct f_acm	*acm = func_to_acm(f);
474	struct usb_composite_dev *cdev = f->config->cdev;
475
476	dev_dbg(&cdev->gadget->dev, "acm ttyGS%d deactivated\n", acm->port_num);
477	gserial_disconnect(&acm->port);
478	usb_ep_disable(acm->notify);
479	acm->notify->driver_data = NULL;
480}
481
482/*-------------------------------------------------------------------------*/
483
484/**
485 * acm_cdc_notify - issue CDC notification to host
486 * @acm: wraps host to be notified
487 * @type: notification type
488 * @value: Refer to cdc specs, wValue field.
489 * @data: data to be sent
490 * @length: size of data
491 * Context: irqs blocked, acm->lock held, acm_notify_req non-null
492 *
493 * Returns zero on success or a negative errno.
494 *
495 * See section 6.3.5 of the CDC 1.1 specification for information
496 * about the only notification we issue:  SerialState change.
497 */
498static int acm_cdc_notify(struct f_acm *acm, u8 type, u16 value,
499		void *data, unsigned length)
500{
501	struct usb_ep			*ep = acm->notify;
502	struct usb_request		*req;
503	struct usb_cdc_notification	*notify;
504	const unsigned			len = sizeof(*notify) + length;
505	void				*buf;
506	int				status;
507
508	req = acm->notify_req;
509	acm->notify_req = NULL;
510	acm->pending = false;
511
512	req->length = len;
513	notify = req->buf;
514	buf = notify + 1;
515
516	notify->bmRequestType = USB_DIR_IN | USB_TYPE_CLASS
517			| USB_RECIP_INTERFACE;
518	notify->bNotificationType = type;
519	notify->wValue = cpu_to_le16(value);
520	notify->wIndex = cpu_to_le16(acm->ctrl_id);
521	notify->wLength = cpu_to_le16(length);
522	memcpy(buf, data, length);
523
524	/* ep_queue() can complete immediately if it fills the fifo... */
525	spin_unlock(&acm->lock);
526	status = usb_ep_queue(ep, req, GFP_ATOMIC);
527	spin_lock(&acm->lock);
528
529	if (status < 0) {
530		ERROR(acm->port.func.config->cdev,
531				"acm ttyGS%d can't notify serial state, %d\n",
532				acm->port_num, status);
533		acm->notify_req = req;
534	}
535
536	return status;
537}
538
539static int acm_notify_serial_state(struct f_acm *acm)
540{
541	struct usb_composite_dev *cdev = acm->port.func.config->cdev;
542	int			status;
543
544	spin_lock(&acm->lock);
545	if (acm->notify_req) {
546		dev_dbg(&cdev->gadget->dev, "acm ttyGS%d serial state %04x\n",
547			acm->port_num, acm->serial_state);
548		status = acm_cdc_notify(acm, USB_CDC_NOTIFY_SERIAL_STATE,
549				0, &acm->serial_state, sizeof(acm->serial_state));
550	} else {
551		acm->pending = true;
552		status = 0;
553	}
554	spin_unlock(&acm->lock);
555	return status;
556}
557
558static void acm_cdc_notify_complete(struct usb_ep *ep, struct usb_request *req)
559{
560	struct f_acm		*acm = req->context;
561	u8			doit = false;
562
563	/* on this call path we do NOT hold the port spinlock,
564	 * which is why ACM needs its own spinlock
565	 */
566	spin_lock(&acm->lock);
567	if (req->status != -ESHUTDOWN)
568		doit = acm->pending;
569	acm->notify_req = req;
570	spin_unlock(&acm->lock);
571
572	if (doit)
573		acm_notify_serial_state(acm);
574}
575
576/* connect == the TTY link is open */
577
578static void acm_connect(struct gserial *port)
579{
580	struct f_acm		*acm = port_to_acm(port);
581
582	acm->serial_state |= ACM_CTRL_DSR | ACM_CTRL_DCD;
583	acm_notify_serial_state(acm);
584}
585
586static void acm_disconnect(struct gserial *port)
587{
588	struct f_acm		*acm = port_to_acm(port);
589
590	acm->serial_state &= ~(ACM_CTRL_DSR | ACM_CTRL_DCD);
591	acm_notify_serial_state(acm);
592}
593
594static int acm_send_break(struct gserial *port, int duration)
595{
596	struct f_acm		*acm = port_to_acm(port);
597	u16			state;
598
599	state = acm->serial_state;
600	state &= ~ACM_CTRL_BRK;
601	if (duration)
602		state |= ACM_CTRL_BRK;
603
604	acm->serial_state = state;
605	return acm_notify_serial_state(acm);
606}
607
608/*-------------------------------------------------------------------------*/
609
610/* ACM function driver setup/binding */
611static int
612acm_bind(struct usb_configuration *c, struct usb_function *f)
613{
614	struct usb_composite_dev *cdev = c->cdev;
615	struct f_acm		*acm = func_to_acm(f);
616	struct usb_string	*us;
617	int			status;
618	struct usb_ep		*ep;
619
620	/* REVISIT might want instance-specific strings to help
621	 * distinguish instances ...
622	 */
623
624	/* maybe allocate device-global string IDs, and patch descriptors */
625	us = usb_gstrings_attach(cdev, acm_strings,
626			ARRAY_SIZE(acm_string_defs));
627	if (IS_ERR(us))
628		return PTR_ERR(us);
629	acm_control_interface_desc.iInterface = us[ACM_CTRL_IDX].id;
630	acm_data_interface_desc.iInterface = us[ACM_DATA_IDX].id;
631	acm_iad_descriptor.iFunction = us[ACM_IAD_IDX].id;
632
633	/* allocate instance-specific interface IDs, and patch descriptors */
634	status = usb_interface_id(c, f);
635	if (status < 0)
636		goto fail;
637	acm->ctrl_id = status;
638	acm_iad_descriptor.bFirstInterface = status;
639
640	acm_control_interface_desc.bInterfaceNumber = status;
641	acm_union_desc .bMasterInterface0 = status;
642
643	status = usb_interface_id(c, f);
644	if (status < 0)
645		goto fail;
646	acm->data_id = status;
647
648	acm_data_interface_desc.bInterfaceNumber = status;
649	acm_union_desc.bSlaveInterface0 = status;
650	acm_call_mgmt_descriptor.bDataInterface = status;
651
652	status = -ENODEV;
653
654	/* allocate instance-specific endpoints */
655	ep = usb_ep_autoconfig(cdev->gadget, &acm_fs_in_desc);
656	if (!ep)
657		goto fail;
658	acm->port.in = ep;
659	ep->driver_data = cdev;	/* claim */
660
661	ep = usb_ep_autoconfig(cdev->gadget, &acm_fs_out_desc);
662	if (!ep)
663		goto fail;
664	acm->port.out = ep;
665	ep->driver_data = cdev;	/* claim */
666
667	ep = usb_ep_autoconfig(cdev->gadget, &acm_fs_notify_desc);
668	if (!ep)
669		goto fail;
670	acm->notify = ep;
671	ep->driver_data = cdev;	/* claim */
672
673	/* allocate notification */
674	acm->notify_req = gs_alloc_req(ep,
675			sizeof(struct usb_cdc_notification) + 2,
676			GFP_KERNEL);
677	if (!acm->notify_req)
678		goto fail;
679
680	acm->notify_req->complete = acm_cdc_notify_complete;
681	acm->notify_req->context = acm;
682
683	/* support all relevant hardware speeds... we expect that when
684	 * hardware is dual speed, all bulk-capable endpoints work at
685	 * both speeds
686	 */
687	acm_hs_in_desc.bEndpointAddress = acm_fs_in_desc.bEndpointAddress;
688	acm_hs_out_desc.bEndpointAddress = acm_fs_out_desc.bEndpointAddress;
689	acm_hs_notify_desc.bEndpointAddress =
690		acm_fs_notify_desc.bEndpointAddress;
691
692	acm_ss_in_desc.bEndpointAddress = acm_fs_in_desc.bEndpointAddress;
693	acm_ss_out_desc.bEndpointAddress = acm_fs_out_desc.bEndpointAddress;
694
695	status = usb_assign_descriptors(f, acm_fs_function, acm_hs_function,
696			acm_ss_function);
697	if (status)
698		goto fail;
699
700	dev_dbg(&cdev->gadget->dev,
701		"acm ttyGS%d: %s speed IN/%s OUT/%s NOTIFY/%s\n",
702		acm->port_num,
703		gadget_is_superspeed(c->cdev->gadget) ? "super" :
704		gadget_is_dualspeed(c->cdev->gadget) ? "dual" : "full",
705		acm->port.in->name, acm->port.out->name,
706		acm->notify->name);
707	return 0;
708
709fail:
710	if (acm->notify_req)
711		gs_free_req(acm->notify, acm->notify_req);
712
713	/* we might as well release our claims on endpoints */
714	if (acm->notify)
715		acm->notify->driver_data = NULL;
716	if (acm->port.out)
717		acm->port.out->driver_data = NULL;
718	if (acm->port.in)
719		acm->port.in->driver_data = NULL;
720
721	ERROR(cdev, "%s/%p: can't bind, err %d\n", f->name, f, status);
722
723	return status;
724}
725
726static void acm_unbind(struct usb_configuration *c, struct usb_function *f)
727{
728	struct f_acm		*acm = func_to_acm(f);
729
730	acm_string_defs[0].id = 0;
731	usb_free_all_descriptors(f);
732	if (acm->notify_req)
733		gs_free_req(acm->notify, acm->notify_req);
734}
735
736static void acm_free_func(struct usb_function *f)
737{
738	struct f_acm		*acm = func_to_acm(f);
739
740	kfree(acm);
741}
742
743static struct usb_function *acm_alloc_func(struct usb_function_instance *fi)
744{
745	struct f_serial_opts *opts;
746	struct f_acm *acm;
747
748	acm = kzalloc(sizeof(*acm), GFP_KERNEL);
749	if (!acm)
750		return ERR_PTR(-ENOMEM);
751
752	spin_lock_init(&acm->lock);
753
754	acm->port.connect = acm_connect;
755	acm->port.disconnect = acm_disconnect;
756	acm->port.send_break = acm_send_break;
757
758	acm->port.func.name = "acm";
759	acm->port.func.strings = acm_strings;
760	/* descriptors are per-instance copies */
761	acm->port.func.bind = acm_bind;
762	acm->port.func.set_alt = acm_set_alt;
763	acm->port.func.setup = acm_setup;
764	acm->port.func.disable = acm_disable;
765
766	opts = container_of(fi, struct f_serial_opts, func_inst);
767	acm->port_num = opts->port_num;
768	acm->port.func.unbind = acm_unbind;
769	acm->port.func.free_func = acm_free_func;
770
771	return &acm->port.func;
772}
773
774static inline struct f_serial_opts *to_f_serial_opts(struct config_item *item)
775{
776	return container_of(to_config_group(item), struct f_serial_opts,
777			func_inst.group);
778}
779
780CONFIGFS_ATTR_STRUCT(f_serial_opts);
781static ssize_t f_acm_attr_show(struct config_item *item,
782				 struct configfs_attribute *attr,
783				 char *page)
784{
785	struct f_serial_opts *opts = to_f_serial_opts(item);
786	struct f_serial_opts_attribute *f_serial_opts_attr =
787		container_of(attr, struct f_serial_opts_attribute, attr);
788	ssize_t ret = 0;
789
790	if (f_serial_opts_attr->show)
791		ret = f_serial_opts_attr->show(opts, page);
792	return ret;
793}
794
795static void acm_attr_release(struct config_item *item)
796{
797	struct f_serial_opts *opts = to_f_serial_opts(item);
798
799	usb_put_function_instance(&opts->func_inst);
800}
801
802static struct configfs_item_operations acm_item_ops = {
803	.release                = acm_attr_release,
804	.show_attribute		= f_acm_attr_show,
805};
806
807static ssize_t f_acm_port_num_show(struct f_serial_opts *opts, char *page)
808{
809	return sprintf(page, "%u\n", opts->port_num);
810}
811
812static struct f_serial_opts_attribute f_acm_port_num =
813	__CONFIGFS_ATTR_RO(port_num, f_acm_port_num_show);
814
815
816static struct configfs_attribute *acm_attrs[] = {
817	&f_acm_port_num.attr,
818	NULL,
819};
820
821static struct config_item_type acm_func_type = {
822	.ct_item_ops    = &acm_item_ops,
823	.ct_attrs	= acm_attrs,
824	.ct_owner       = THIS_MODULE,
825};
826
827static void acm_free_instance(struct usb_function_instance *fi)
828{
829	struct f_serial_opts *opts;
830
831	opts = container_of(fi, struct f_serial_opts, func_inst);
832	gserial_free_line(opts->port_num);
833	kfree(opts);
834}
835
836static struct usb_function_instance *acm_alloc_instance(void)
837{
838	struct f_serial_opts *opts;
839	int ret;
840
841	opts = kzalloc(sizeof(*opts), GFP_KERNEL);
842	if (!opts)
843		return ERR_PTR(-ENOMEM);
844	opts->func_inst.free_func_inst = acm_free_instance;
845	ret = gserial_alloc_line(&opts->port_num);
846	if (ret) {
847		kfree(opts);
848		return ERR_PTR(ret);
849	}
850	config_group_init_type_name(&opts->func_inst.group, "",
851			&acm_func_type);
852	return &opts->func_inst;
853}
854DECLARE_USB_FUNCTION_INIT(acm, acm_alloc_instance, acm_alloc_func);
855MODULE_LICENSE("GPL");
856