musb_gadget_ep0.c revision 538bf07d897008e87eca49cde5970545f3814ac7
1/* 2 * MUSB OTG peripheral driver ep0 handling 3 * 4 * Copyright 2005 Mentor Graphics Corporation 5 * Copyright (C) 2005-2006 by Texas Instruments 6 * Copyright (C) 2006-2007 Nokia Corporation 7 * Copyright (C) 2008-2009 MontaVista Software, Inc. <source@mvista.com> 8 * 9 * This program is free software; you can redistribute it and/or 10 * modify it under the terms of the GNU General Public License 11 * version 2 as published by the Free Software Foundation. 12 * 13 * This program is distributed in the hope that it will be useful, but 14 * WITHOUT ANY WARRANTY; without even the implied warranty of 15 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU 16 * General Public License for more details. 17 * 18 * You should have received a copy of the GNU General Public License 19 * along with this program; if not, write to the Free Software 20 * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 21 * 02110-1301 USA 22 * 23 * THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED 24 * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF 25 * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN 26 * NO EVENT SHALL THE AUTHORS BE LIABLE FOR ANY DIRECT, INDIRECT, 27 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT 28 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF 29 * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON 30 * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 31 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF 32 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 33 * 34 */ 35 36#include <linux/kernel.h> 37#include <linux/list.h> 38#include <linux/timer.h> 39#include <linux/spinlock.h> 40#include <linux/device.h> 41#include <linux/interrupt.h> 42 43#include "musb_core.h" 44 45/* ep0 is always musb->endpoints[0].ep_in */ 46#define next_ep0_request(musb) next_in_request(&(musb)->endpoints[0]) 47 48/* 49 * locking note: we use only the controller lock, for simpler correctness. 50 * It's always held with IRQs blocked. 51 * 52 * It protects the ep0 request queue as well as ep0_state, not just the 53 * controller and indexed registers. And that lock stays held unless it 54 * needs to be dropped to allow reentering this driver ... like upcalls to 55 * the gadget driver, or adjusting endpoint halt status. 56 */ 57 58static char *decode_ep0stage(u8 stage) 59{ 60 switch (stage) { 61 case MUSB_EP0_STAGE_IDLE: return "idle"; 62 case MUSB_EP0_STAGE_SETUP: return "setup"; 63 case MUSB_EP0_STAGE_TX: return "in"; 64 case MUSB_EP0_STAGE_RX: return "out"; 65 case MUSB_EP0_STAGE_ACKWAIT: return "wait"; 66 case MUSB_EP0_STAGE_STATUSIN: return "in/status"; 67 case MUSB_EP0_STAGE_STATUSOUT: return "out/status"; 68 default: return "?"; 69 } 70} 71 72/* handle a standard GET_STATUS request 73 * Context: caller holds controller lock 74 */ 75static int service_tx_status_request( 76 struct musb *musb, 77 const struct usb_ctrlrequest *ctrlrequest) 78{ 79 void __iomem *mbase = musb->mregs; 80 int handled = 1; 81 u8 result[2], epnum = 0; 82 const u8 recip = ctrlrequest->bRequestType & USB_RECIP_MASK; 83 84 result[1] = 0; 85 86 switch (recip) { 87 case USB_RECIP_DEVICE: 88 result[0] = musb->is_self_powered << USB_DEVICE_SELF_POWERED; 89 result[0] |= musb->may_wakeup << USB_DEVICE_REMOTE_WAKEUP; 90 if (musb->g.is_otg) { 91 result[0] |= musb->g.b_hnp_enable 92 << USB_DEVICE_B_HNP_ENABLE; 93 result[0] |= musb->g.a_alt_hnp_support 94 << USB_DEVICE_A_ALT_HNP_SUPPORT; 95 result[0] |= musb->g.a_hnp_support 96 << USB_DEVICE_A_HNP_SUPPORT; 97 } 98 break; 99 100 case USB_RECIP_INTERFACE: 101 result[0] = 0; 102 break; 103 104 case USB_RECIP_ENDPOINT: { 105 int is_in; 106 struct musb_ep *ep; 107 u16 tmp; 108 void __iomem *regs; 109 110 epnum = (u8) ctrlrequest->wIndex; 111 if (!epnum) { 112 result[0] = 0; 113 break; 114 } 115 116 is_in = epnum & USB_DIR_IN; 117 if (is_in) { 118 epnum &= 0x0f; 119 ep = &musb->endpoints[epnum].ep_in; 120 } else { 121 ep = &musb->endpoints[epnum].ep_out; 122 } 123 regs = musb->endpoints[epnum].regs; 124 125 if (epnum >= MUSB_C_NUM_EPS || !ep->desc) { 126 handled = -EINVAL; 127 break; 128 } 129 130 musb_ep_select(mbase, epnum); 131 if (is_in) 132 tmp = musb_readw(regs, MUSB_TXCSR) 133 & MUSB_TXCSR_P_SENDSTALL; 134 else 135 tmp = musb_readw(regs, MUSB_RXCSR) 136 & MUSB_RXCSR_P_SENDSTALL; 137 musb_ep_select(mbase, 0); 138 139 result[0] = tmp ? 1 : 0; 140 } break; 141 142 default: 143 /* class, vendor, etc ... delegate */ 144 handled = 0; 145 break; 146 } 147 148 /* fill up the fifo; caller updates csr0 */ 149 if (handled > 0) { 150 u16 len = le16_to_cpu(ctrlrequest->wLength); 151 152 if (len > 2) 153 len = 2; 154 musb_write_fifo(&musb->endpoints[0], len, result); 155 } 156 157 return handled; 158} 159 160/* 161 * handle a control-IN request, the end0 buffer contains the current request 162 * that is supposed to be a standard control request. Assumes the fifo to 163 * be at least 2 bytes long. 164 * 165 * @return 0 if the request was NOT HANDLED, 166 * < 0 when error 167 * > 0 when the request is processed 168 * 169 * Context: caller holds controller lock 170 */ 171static int 172service_in_request(struct musb *musb, const struct usb_ctrlrequest *ctrlrequest) 173{ 174 int handled = 0; /* not handled */ 175 176 if ((ctrlrequest->bRequestType & USB_TYPE_MASK) 177 == USB_TYPE_STANDARD) { 178 switch (ctrlrequest->bRequest) { 179 case USB_REQ_GET_STATUS: 180 handled = service_tx_status_request(musb, 181 ctrlrequest); 182 break; 183 184 /* case USB_REQ_SYNC_FRAME: */ 185 186 default: 187 break; 188 } 189 } 190 return handled; 191} 192 193/* 194 * Context: caller holds controller lock 195 */ 196static void musb_g_ep0_giveback(struct musb *musb, struct usb_request *req) 197{ 198 musb_g_giveback(&musb->endpoints[0].ep_in, req, 0); 199} 200 201/* 202 * Tries to start B-device HNP negotiation if enabled via sysfs 203 */ 204static inline void musb_try_b_hnp_enable(struct musb *musb) 205{ 206 void __iomem *mbase = musb->mregs; 207 u8 devctl; 208 209 dev_dbg(musb->controller, "HNP: Setting HR\n"); 210 devctl = musb_readb(mbase, MUSB_DEVCTL); 211 musb_writeb(mbase, MUSB_DEVCTL, devctl | MUSB_DEVCTL_HR); 212} 213 214/* 215 * Handle all control requests with no DATA stage, including standard 216 * requests such as: 217 * USB_REQ_SET_CONFIGURATION, USB_REQ_SET_INTERFACE, unrecognized 218 * always delegated to the gadget driver 219 * USB_REQ_SET_ADDRESS, USB_REQ_CLEAR_FEATURE, USB_REQ_SET_FEATURE 220 * always handled here, except for class/vendor/... features 221 * 222 * Context: caller holds controller lock 223 */ 224static int 225service_zero_data_request(struct musb *musb, 226 struct usb_ctrlrequest *ctrlrequest) 227__releases(musb->lock) 228__acquires(musb->lock) 229{ 230 int handled = -EINVAL; 231 void __iomem *mbase = musb->mregs; 232 const u8 recip = ctrlrequest->bRequestType & USB_RECIP_MASK; 233 234 /* the gadget driver handles everything except what we MUST handle */ 235 if ((ctrlrequest->bRequestType & USB_TYPE_MASK) 236 == USB_TYPE_STANDARD) { 237 switch (ctrlrequest->bRequest) { 238 case USB_REQ_SET_ADDRESS: 239 /* change it after the status stage */ 240 musb->set_address = true; 241 musb->address = (u8) (ctrlrequest->wValue & 0x7f); 242 handled = 1; 243 break; 244 245 case USB_REQ_CLEAR_FEATURE: 246 switch (recip) { 247 case USB_RECIP_DEVICE: 248 if (ctrlrequest->wValue 249 != USB_DEVICE_REMOTE_WAKEUP) 250 break; 251 musb->may_wakeup = 0; 252 handled = 1; 253 break; 254 case USB_RECIP_INTERFACE: 255 break; 256 case USB_RECIP_ENDPOINT:{ 257 const u8 epnum = 258 ctrlrequest->wIndex & 0x0f; 259 struct musb_ep *musb_ep; 260 struct musb_hw_ep *ep; 261 struct musb_request *request; 262 void __iomem *regs; 263 int is_in; 264 u16 csr; 265 266 if (epnum == 0 || epnum >= MUSB_C_NUM_EPS || 267 ctrlrequest->wValue != USB_ENDPOINT_HALT) 268 break; 269 270 ep = musb->endpoints + epnum; 271 regs = ep->regs; 272 is_in = ctrlrequest->wIndex & USB_DIR_IN; 273 if (is_in) 274 musb_ep = &ep->ep_in; 275 else 276 musb_ep = &ep->ep_out; 277 if (!musb_ep->desc) 278 break; 279 280 handled = 1; 281 /* Ignore request if endpoint is wedged */ 282 if (musb_ep->wedged) 283 break; 284 285 musb_ep_select(mbase, epnum); 286 if (is_in) { 287 csr = musb_readw(regs, MUSB_TXCSR); 288 csr |= MUSB_TXCSR_CLRDATATOG | 289 MUSB_TXCSR_P_WZC_BITS; 290 csr &= ~(MUSB_TXCSR_P_SENDSTALL | 291 MUSB_TXCSR_P_SENTSTALL | 292 MUSB_TXCSR_TXPKTRDY); 293 musb_writew(regs, MUSB_TXCSR, csr); 294 } else { 295 csr = musb_readw(regs, MUSB_RXCSR); 296 csr |= MUSB_RXCSR_CLRDATATOG | 297 MUSB_RXCSR_P_WZC_BITS; 298 csr &= ~(MUSB_RXCSR_P_SENDSTALL | 299 MUSB_RXCSR_P_SENTSTALL); 300 musb_writew(regs, MUSB_RXCSR, csr); 301 } 302 303 /* Maybe start the first request in the queue */ 304 request = next_request(musb_ep); 305 if (!musb_ep->busy && request) { 306 dev_dbg(musb->controller, "restarting the request\n"); 307 musb_ep_restart(musb, request); 308 } 309 310 /* select ep0 again */ 311 musb_ep_select(mbase, 0); 312 } break; 313 default: 314 /* class, vendor, etc ... delegate */ 315 handled = 0; 316 break; 317 } 318 break; 319 320 case USB_REQ_SET_FEATURE: 321 switch (recip) { 322 case USB_RECIP_DEVICE: 323 handled = 1; 324 switch (ctrlrequest->wValue) { 325 case USB_DEVICE_REMOTE_WAKEUP: 326 musb->may_wakeup = 1; 327 break; 328 case USB_DEVICE_TEST_MODE: 329 if (musb->g.speed != USB_SPEED_HIGH) 330 goto stall; 331 if (ctrlrequest->wIndex & 0xff) 332 goto stall; 333 334 switch (ctrlrequest->wIndex >> 8) { 335 case 1: 336 pr_debug("TEST_J\n"); 337 /* TEST_J */ 338 musb->test_mode_nr = 339 MUSB_TEST_J; 340 break; 341 case 2: 342 /* TEST_K */ 343 pr_debug("TEST_K\n"); 344 musb->test_mode_nr = 345 MUSB_TEST_K; 346 break; 347 case 3: 348 /* TEST_SE0_NAK */ 349 pr_debug("TEST_SE0_NAK\n"); 350 musb->test_mode_nr = 351 MUSB_TEST_SE0_NAK; 352 break; 353 case 4: 354 /* TEST_PACKET */ 355 pr_debug("TEST_PACKET\n"); 356 musb->test_mode_nr = 357 MUSB_TEST_PACKET; 358 break; 359 360 case 0xc0: 361 /* TEST_FORCE_HS */ 362 pr_debug("TEST_FORCE_HS\n"); 363 musb->test_mode_nr = 364 MUSB_TEST_FORCE_HS; 365 break; 366 case 0xc1: 367 /* TEST_FORCE_FS */ 368 pr_debug("TEST_FORCE_FS\n"); 369 musb->test_mode_nr = 370 MUSB_TEST_FORCE_FS; 371 break; 372 case 0xc2: 373 /* TEST_FIFO_ACCESS */ 374 pr_debug("TEST_FIFO_ACCESS\n"); 375 musb->test_mode_nr = 376 MUSB_TEST_FIFO_ACCESS; 377 break; 378 case 0xc3: 379 /* TEST_FORCE_HOST */ 380 pr_debug("TEST_FORCE_HOST\n"); 381 musb->test_mode_nr = 382 MUSB_TEST_FORCE_HOST; 383 break; 384 default: 385 goto stall; 386 } 387 388 /* enter test mode after irq */ 389 if (handled > 0) 390 musb->test_mode = true; 391 break; 392 case USB_DEVICE_B_HNP_ENABLE: 393 if (!musb->g.is_otg) 394 goto stall; 395 musb->g.b_hnp_enable = 1; 396 musb_try_b_hnp_enable(musb); 397 break; 398 case USB_DEVICE_A_HNP_SUPPORT: 399 if (!musb->g.is_otg) 400 goto stall; 401 musb->g.a_hnp_support = 1; 402 break; 403 case USB_DEVICE_A_ALT_HNP_SUPPORT: 404 if (!musb->g.is_otg) 405 goto stall; 406 musb->g.a_alt_hnp_support = 1; 407 break; 408 case USB_DEVICE_DEBUG_MODE: 409 handled = 0; 410 break; 411stall: 412 default: 413 handled = -EINVAL; 414 break; 415 } 416 break; 417 418 case USB_RECIP_INTERFACE: 419 break; 420 421 case USB_RECIP_ENDPOINT:{ 422 const u8 epnum = 423 ctrlrequest->wIndex & 0x0f; 424 struct musb_ep *musb_ep; 425 struct musb_hw_ep *ep; 426 void __iomem *regs; 427 int is_in; 428 u16 csr; 429 430 if (epnum == 0 || epnum >= MUSB_C_NUM_EPS || 431 ctrlrequest->wValue != USB_ENDPOINT_HALT) 432 break; 433 434 ep = musb->endpoints + epnum; 435 regs = ep->regs; 436 is_in = ctrlrequest->wIndex & USB_DIR_IN; 437 if (is_in) 438 musb_ep = &ep->ep_in; 439 else 440 musb_ep = &ep->ep_out; 441 if (!musb_ep->desc) 442 break; 443 444 musb_ep_select(mbase, epnum); 445 if (is_in) { 446 csr = musb_readw(regs, MUSB_TXCSR); 447 if (csr & MUSB_TXCSR_FIFONOTEMPTY) 448 csr |= MUSB_TXCSR_FLUSHFIFO; 449 csr |= MUSB_TXCSR_P_SENDSTALL 450 | MUSB_TXCSR_CLRDATATOG 451 | MUSB_TXCSR_P_WZC_BITS; 452 musb_writew(regs, MUSB_TXCSR, csr); 453 } else { 454 csr = musb_readw(regs, MUSB_RXCSR); 455 csr |= MUSB_RXCSR_P_SENDSTALL 456 | MUSB_RXCSR_FLUSHFIFO 457 | MUSB_RXCSR_CLRDATATOG 458 | MUSB_RXCSR_P_WZC_BITS; 459 musb_writew(regs, MUSB_RXCSR, csr); 460 } 461 462 /* select ep0 again */ 463 musb_ep_select(mbase, 0); 464 handled = 1; 465 } break; 466 467 default: 468 /* class, vendor, etc ... delegate */ 469 handled = 0; 470 break; 471 } 472 break; 473 default: 474 /* delegate SET_CONFIGURATION, etc */ 475 handled = 0; 476 } 477 } else 478 handled = 0; 479 return handled; 480} 481 482/* we have an ep0out data packet 483 * Context: caller holds controller lock 484 */ 485static void ep0_rxstate(struct musb *musb) 486{ 487 void __iomem *regs = musb->control_ep->regs; 488 struct musb_request *request; 489 struct usb_request *req; 490 u16 count, csr; 491 492 request = next_ep0_request(musb); 493 req = &request->request; 494 495 /* read packet and ack; or stall because of gadget driver bug: 496 * should have provided the rx buffer before setup() returned. 497 */ 498 if (req) { 499 void *buf = req->buf + req->actual; 500 unsigned len = req->length - req->actual; 501 502 /* read the buffer */ 503 count = musb_readb(regs, MUSB_COUNT0); 504 if (count > len) { 505 req->status = -EOVERFLOW; 506 count = len; 507 } 508 if (count > 0) { 509 musb_read_fifo(&musb->endpoints[0], count, buf); 510 req->actual += count; 511 } 512 csr = MUSB_CSR0_P_SVDRXPKTRDY; 513 if (count < 64 || req->actual == req->length) { 514 musb->ep0_state = MUSB_EP0_STAGE_STATUSIN; 515 csr |= MUSB_CSR0_P_DATAEND; 516 } else 517 req = NULL; 518 } else 519 csr = MUSB_CSR0_P_SVDRXPKTRDY | MUSB_CSR0_P_SENDSTALL; 520 521 522 /* Completion handler may choose to stall, e.g. because the 523 * message just received holds invalid data. 524 */ 525 if (req) { 526 musb->ackpend = csr; 527 musb_g_ep0_giveback(musb, req); 528 if (!musb->ackpend) 529 return; 530 musb->ackpend = 0; 531 } 532 musb_ep_select(musb->mregs, 0); 533 musb_writew(regs, MUSB_CSR0, csr); 534} 535 536/* 537 * transmitting to the host (IN), this code might be called from IRQ 538 * and from kernel thread. 539 * 540 * Context: caller holds controller lock 541 */ 542static void ep0_txstate(struct musb *musb) 543{ 544 void __iomem *regs = musb->control_ep->regs; 545 struct musb_request *req = next_ep0_request(musb); 546 struct usb_request *request; 547 u16 csr = MUSB_CSR0_TXPKTRDY; 548 u8 *fifo_src; 549 u8 fifo_count; 550 551 if (!req) { 552 /* WARN_ON(1); */ 553 dev_dbg(musb->controller, "odd; csr0 %04x\n", musb_readw(regs, MUSB_CSR0)); 554 return; 555 } 556 557 request = &req->request; 558 559 /* load the data */ 560 fifo_src = (u8 *) request->buf + request->actual; 561 fifo_count = min((unsigned) MUSB_EP0_FIFOSIZE, 562 request->length - request->actual); 563 musb_write_fifo(&musb->endpoints[0], fifo_count, fifo_src); 564 request->actual += fifo_count; 565 566 /* update the flags */ 567 if (fifo_count < MUSB_MAX_END0_PACKET 568 || (request->actual == request->length 569 && !request->zero)) { 570 musb->ep0_state = MUSB_EP0_STAGE_STATUSOUT; 571 csr |= MUSB_CSR0_P_DATAEND; 572 } else 573 request = NULL; 574 575 /* report completions as soon as the fifo's loaded; there's no 576 * win in waiting till this last packet gets acked. (other than 577 * very precise fault reporting, needed by USB TMC; possible with 578 * this hardware, but not usable from portable gadget drivers.) 579 */ 580 if (request) { 581 musb->ackpend = csr; 582 musb_g_ep0_giveback(musb, request); 583 if (!musb->ackpend) 584 return; 585 musb->ackpend = 0; 586 } 587 588 /* send it out, triggering a "txpktrdy cleared" irq */ 589 musb_ep_select(musb->mregs, 0); 590 musb_writew(regs, MUSB_CSR0, csr); 591} 592 593/* 594 * Read a SETUP packet (struct usb_ctrlrequest) from the hardware. 595 * Fields are left in USB byte-order. 596 * 597 * Context: caller holds controller lock. 598 */ 599static void 600musb_read_setup(struct musb *musb, struct usb_ctrlrequest *req) 601{ 602 struct musb_request *r; 603 void __iomem *regs = musb->control_ep->regs; 604 605 musb_read_fifo(&musb->endpoints[0], sizeof *req, (u8 *)req); 606 607 /* NOTE: earlier 2.6 versions changed setup packets to host 608 * order, but now USB packets always stay in USB byte order. 609 */ 610 dev_dbg(musb->controller, "SETUP req%02x.%02x v%04x i%04x l%d\n", 611 req->bRequestType, 612 req->bRequest, 613 le16_to_cpu(req->wValue), 614 le16_to_cpu(req->wIndex), 615 le16_to_cpu(req->wLength)); 616 617 /* clean up any leftover transfers */ 618 r = next_ep0_request(musb); 619 if (r) 620 musb_g_ep0_giveback(musb, &r->request); 621 622 /* For zero-data requests we want to delay the STATUS stage to 623 * avoid SETUPEND errors. If we read data (OUT), delay accepting 624 * packets until there's a buffer to store them in. 625 * 626 * If we write data, the controller acts happier if we enable 627 * the TX FIFO right away, and give the controller a moment 628 * to switch modes... 629 */ 630 musb->set_address = false; 631 musb->ackpend = MUSB_CSR0_P_SVDRXPKTRDY; 632 if (req->wLength == 0) { 633 if (req->bRequestType & USB_DIR_IN) 634 musb->ackpend |= MUSB_CSR0_TXPKTRDY; 635 musb->ep0_state = MUSB_EP0_STAGE_ACKWAIT; 636 } else if (req->bRequestType & USB_DIR_IN) { 637 musb->ep0_state = MUSB_EP0_STAGE_TX; 638 musb_writew(regs, MUSB_CSR0, MUSB_CSR0_P_SVDRXPKTRDY); 639 while ((musb_readw(regs, MUSB_CSR0) 640 & MUSB_CSR0_RXPKTRDY) != 0) 641 cpu_relax(); 642 musb->ackpend = 0; 643 } else 644 musb->ep0_state = MUSB_EP0_STAGE_RX; 645} 646 647static int 648forward_to_driver(struct musb *musb, const struct usb_ctrlrequest *ctrlrequest) 649__releases(musb->lock) 650__acquires(musb->lock) 651{ 652 int retval; 653 if (!musb->gadget_driver) 654 return -EOPNOTSUPP; 655 spin_unlock(&musb->lock); 656 retval = musb->gadget_driver->setup(&musb->g, ctrlrequest); 657 spin_lock(&musb->lock); 658 return retval; 659} 660 661/* 662 * Handle peripheral ep0 interrupt 663 * 664 * Context: irq handler; we won't re-enter the driver that way. 665 */ 666irqreturn_t musb_g_ep0_irq(struct musb *musb) 667{ 668 u16 csr; 669 u16 len; 670 void __iomem *mbase = musb->mregs; 671 void __iomem *regs = musb->endpoints[0].regs; 672 irqreturn_t retval = IRQ_NONE; 673 674 musb_ep_select(mbase, 0); /* select ep0 */ 675 csr = musb_readw(regs, MUSB_CSR0); 676 len = musb_readb(regs, MUSB_COUNT0); 677 678 dev_dbg(musb->controller, "csr %04x, count %d, ep0stage %s\n", 679 csr, len, decode_ep0stage(musb->ep0_state)); 680 681 if (csr & MUSB_CSR0_P_DATAEND) { 682 /* 683 * If DATAEND is set we should not call the callback, 684 * hence the status stage is not complete. 685 */ 686 return IRQ_HANDLED; 687 } 688 689 /* I sent a stall.. need to acknowledge it now.. */ 690 if (csr & MUSB_CSR0_P_SENTSTALL) { 691 musb_writew(regs, MUSB_CSR0, 692 csr & ~MUSB_CSR0_P_SENTSTALL); 693 retval = IRQ_HANDLED; 694 musb->ep0_state = MUSB_EP0_STAGE_IDLE; 695 csr = musb_readw(regs, MUSB_CSR0); 696 } 697 698 /* request ended "early" */ 699 if (csr & MUSB_CSR0_P_SETUPEND) { 700 musb_writew(regs, MUSB_CSR0, MUSB_CSR0_P_SVDSETUPEND); 701 retval = IRQ_HANDLED; 702 /* Transition into the early status phase */ 703 switch (musb->ep0_state) { 704 case MUSB_EP0_STAGE_TX: 705 musb->ep0_state = MUSB_EP0_STAGE_STATUSOUT; 706 break; 707 case MUSB_EP0_STAGE_RX: 708 musb->ep0_state = MUSB_EP0_STAGE_STATUSIN; 709 break; 710 default: 711 ERR("SetupEnd came in a wrong ep0stage %s\n", 712 decode_ep0stage(musb->ep0_state)); 713 } 714 csr = musb_readw(regs, MUSB_CSR0); 715 /* NOTE: request may need completion */ 716 } 717 718 /* docs from Mentor only describe tx, rx, and idle/setup states. 719 * we need to handle nuances around status stages, and also the 720 * case where status and setup stages come back-to-back ... 721 */ 722 switch (musb->ep0_state) { 723 724 case MUSB_EP0_STAGE_TX: 725 /* irq on clearing txpktrdy */ 726 if ((csr & MUSB_CSR0_TXPKTRDY) == 0) { 727 ep0_txstate(musb); 728 retval = IRQ_HANDLED; 729 } 730 break; 731 732 case MUSB_EP0_STAGE_RX: 733 /* irq on set rxpktrdy */ 734 if (csr & MUSB_CSR0_RXPKTRDY) { 735 ep0_rxstate(musb); 736 retval = IRQ_HANDLED; 737 } 738 break; 739 740 case MUSB_EP0_STAGE_STATUSIN: 741 /* end of sequence #2 (OUT/RX state) or #3 (no data) */ 742 743 /* update address (if needed) only @ the end of the 744 * status phase per usb spec, which also guarantees 745 * we get 10 msec to receive this irq... until this 746 * is done we won't see the next packet. 747 */ 748 if (musb->set_address) { 749 musb->set_address = false; 750 musb_writeb(mbase, MUSB_FADDR, musb->address); 751 } 752 753 /* enter test mode if needed (exit by reset) */ 754 else if (musb->test_mode) { 755 dev_dbg(musb->controller, "entering TESTMODE\n"); 756 757 if (MUSB_TEST_PACKET == musb->test_mode_nr) 758 musb_load_testpacket(musb); 759 760 musb_writeb(mbase, MUSB_TESTMODE, 761 musb->test_mode_nr); 762 } 763 /* FALLTHROUGH */ 764 765 case MUSB_EP0_STAGE_STATUSOUT: 766 /* end of sequence #1: write to host (TX state) */ 767 { 768 struct musb_request *req; 769 770 req = next_ep0_request(musb); 771 if (req) 772 musb_g_ep0_giveback(musb, &req->request); 773 } 774 775 /* 776 * In case when several interrupts can get coalesced, 777 * check to see if we've already received a SETUP packet... 778 */ 779 if (csr & MUSB_CSR0_RXPKTRDY) 780 goto setup; 781 782 retval = IRQ_HANDLED; 783 musb->ep0_state = MUSB_EP0_STAGE_IDLE; 784 break; 785 786 case MUSB_EP0_STAGE_IDLE: 787 /* 788 * This state is typically (but not always) indiscernible 789 * from the status states since the corresponding interrupts 790 * tend to happen within too little period of time (with only 791 * a zero-length packet in between) and so get coalesced... 792 */ 793 retval = IRQ_HANDLED; 794 musb->ep0_state = MUSB_EP0_STAGE_SETUP; 795 /* FALLTHROUGH */ 796 797 case MUSB_EP0_STAGE_SETUP: 798setup: 799 if (csr & MUSB_CSR0_RXPKTRDY) { 800 struct usb_ctrlrequest setup; 801 int handled = 0; 802 803 if (len != 8) { 804 ERR("SETUP packet len %d != 8 ?\n", len); 805 break; 806 } 807 musb_read_setup(musb, &setup); 808 retval = IRQ_HANDLED; 809 810 /* sometimes the RESET won't be reported */ 811 if (unlikely(musb->g.speed == USB_SPEED_UNKNOWN)) { 812 u8 power; 813 814 printk(KERN_NOTICE "%s: peripheral reset " 815 "irq lost!\n", 816 musb_driver_name); 817 power = musb_readb(mbase, MUSB_POWER); 818 musb->g.speed = (power & MUSB_POWER_HSMODE) 819 ? USB_SPEED_HIGH : USB_SPEED_FULL; 820 821 } 822 823 switch (musb->ep0_state) { 824 825 /* sequence #3 (no data stage), includes requests 826 * we can't forward (notably SET_ADDRESS and the 827 * device/endpoint feature set/clear operations) 828 * plus SET_CONFIGURATION and others we must 829 */ 830 case MUSB_EP0_STAGE_ACKWAIT: 831 handled = service_zero_data_request( 832 musb, &setup); 833 834 /* 835 * We're expecting no data in any case, so 836 * always set the DATAEND bit -- doing this 837 * here helps avoid SetupEnd interrupt coming 838 * in the idle stage when we're stalling... 839 */ 840 musb->ackpend |= MUSB_CSR0_P_DATAEND; 841 842 /* status stage might be immediate */ 843 if (handled > 0) 844 musb->ep0_state = 845 MUSB_EP0_STAGE_STATUSIN; 846 break; 847 848 /* sequence #1 (IN to host), includes GET_STATUS 849 * requests that we can't forward, GET_DESCRIPTOR 850 * and others that we must 851 */ 852 case MUSB_EP0_STAGE_TX: 853 handled = service_in_request(musb, &setup); 854 if (handled > 0) { 855 musb->ackpend = MUSB_CSR0_TXPKTRDY 856 | MUSB_CSR0_P_DATAEND; 857 musb->ep0_state = 858 MUSB_EP0_STAGE_STATUSOUT; 859 } 860 break; 861 862 /* sequence #2 (OUT from host), always forward */ 863 default: /* MUSB_EP0_STAGE_RX */ 864 break; 865 } 866 867 dev_dbg(musb->controller, "handled %d, csr %04x, ep0stage %s\n", 868 handled, csr, 869 decode_ep0stage(musb->ep0_state)); 870 871 /* unless we need to delegate this to the gadget 872 * driver, we know how to wrap this up: csr0 has 873 * not yet been written. 874 */ 875 if (handled < 0) 876 goto stall; 877 else if (handled > 0) 878 goto finish; 879 880 handled = forward_to_driver(musb, &setup); 881 if (handled < 0) { 882 musb_ep_select(mbase, 0); 883stall: 884 dev_dbg(musb->controller, "stall (%d)\n", handled); 885 musb->ackpend |= MUSB_CSR0_P_SENDSTALL; 886 musb->ep0_state = MUSB_EP0_STAGE_IDLE; 887finish: 888 musb_writew(regs, MUSB_CSR0, 889 musb->ackpend); 890 musb->ackpend = 0; 891 } 892 } 893 break; 894 895 case MUSB_EP0_STAGE_ACKWAIT: 896 /* This should not happen. But happens with tusb6010 with 897 * g_file_storage and high speed. Do nothing. 898 */ 899 retval = IRQ_HANDLED; 900 break; 901 902 default: 903 /* "can't happen" */ 904 WARN_ON(1); 905 musb_writew(regs, MUSB_CSR0, MUSB_CSR0_P_SENDSTALL); 906 musb->ep0_state = MUSB_EP0_STAGE_IDLE; 907 break; 908 } 909 910 return retval; 911} 912 913 914static int 915musb_g_ep0_enable(struct usb_ep *ep, const struct usb_endpoint_descriptor *desc) 916{ 917 /* always enabled */ 918 return -EINVAL; 919} 920 921static int musb_g_ep0_disable(struct usb_ep *e) 922{ 923 /* always enabled */ 924 return -EINVAL; 925} 926 927static int 928musb_g_ep0_queue(struct usb_ep *e, struct usb_request *r, gfp_t gfp_flags) 929{ 930 struct musb_ep *ep; 931 struct musb_request *req; 932 struct musb *musb; 933 int status; 934 unsigned long lockflags; 935 void __iomem *regs; 936 937 if (!e || !r) 938 return -EINVAL; 939 940 ep = to_musb_ep(e); 941 musb = ep->musb; 942 regs = musb->control_ep->regs; 943 944 req = to_musb_request(r); 945 req->musb = musb; 946 req->request.actual = 0; 947 req->request.status = -EINPROGRESS; 948 req->tx = ep->is_in; 949 950 spin_lock_irqsave(&musb->lock, lockflags); 951 952 if (!list_empty(&ep->req_list)) { 953 status = -EBUSY; 954 goto cleanup; 955 } 956 957 switch (musb->ep0_state) { 958 case MUSB_EP0_STAGE_RX: /* control-OUT data */ 959 case MUSB_EP0_STAGE_TX: /* control-IN data */ 960 case MUSB_EP0_STAGE_ACKWAIT: /* zero-length data */ 961 status = 0; 962 break; 963 default: 964 dev_dbg(musb->controller, "ep0 request queued in state %d\n", 965 musb->ep0_state); 966 status = -EINVAL; 967 goto cleanup; 968 } 969 970 /* add request to the list */ 971 list_add_tail(&req->list, &ep->req_list); 972 973 dev_dbg(musb->controller, "queue to %s (%s), length=%d\n", 974 ep->name, ep->is_in ? "IN/TX" : "OUT/RX", 975 req->request.length); 976 977 musb_ep_select(musb->mregs, 0); 978 979 /* sequence #1, IN ... start writing the data */ 980 if (musb->ep0_state == MUSB_EP0_STAGE_TX) 981 ep0_txstate(musb); 982 983 /* sequence #3, no-data ... issue IN status */ 984 else if (musb->ep0_state == MUSB_EP0_STAGE_ACKWAIT) { 985 if (req->request.length) 986 status = -EINVAL; 987 else { 988 musb->ep0_state = MUSB_EP0_STAGE_STATUSIN; 989 musb_writew(regs, MUSB_CSR0, 990 musb->ackpend | MUSB_CSR0_P_DATAEND); 991 musb->ackpend = 0; 992 musb_g_ep0_giveback(ep->musb, r); 993 } 994 995 /* else for sequence #2 (OUT), caller provides a buffer 996 * before the next packet arrives. deferred responses 997 * (after SETUP is acked) are racey. 998 */ 999 } else if (musb->ackpend) { 1000 musb_writew(regs, MUSB_CSR0, musb->ackpend); 1001 musb->ackpend = 0; 1002 } 1003 1004cleanup: 1005 spin_unlock_irqrestore(&musb->lock, lockflags); 1006 return status; 1007} 1008 1009static int musb_g_ep0_dequeue(struct usb_ep *ep, struct usb_request *req) 1010{ 1011 /* we just won't support this */ 1012 return -EINVAL; 1013} 1014 1015static int musb_g_ep0_halt(struct usb_ep *e, int value) 1016{ 1017 struct musb_ep *ep; 1018 struct musb *musb; 1019 void __iomem *base, *regs; 1020 unsigned long flags; 1021 int status; 1022 u16 csr; 1023 1024 if (!e || !value) 1025 return -EINVAL; 1026 1027 ep = to_musb_ep(e); 1028 musb = ep->musb; 1029 base = musb->mregs; 1030 regs = musb->control_ep->regs; 1031 status = 0; 1032 1033 spin_lock_irqsave(&musb->lock, flags); 1034 1035 if (!list_empty(&ep->req_list)) { 1036 status = -EBUSY; 1037 goto cleanup; 1038 } 1039 1040 musb_ep_select(base, 0); 1041 csr = musb->ackpend; 1042 1043 switch (musb->ep0_state) { 1044 1045 /* Stalls are usually issued after parsing SETUP packet, either 1046 * directly in irq context from setup() or else later. 1047 */ 1048 case MUSB_EP0_STAGE_TX: /* control-IN data */ 1049 case MUSB_EP0_STAGE_ACKWAIT: /* STALL for zero-length data */ 1050 case MUSB_EP0_STAGE_RX: /* control-OUT data */ 1051 csr = musb_readw(regs, MUSB_CSR0); 1052 /* FALLTHROUGH */ 1053 1054 /* It's also OK to issue stalls during callbacks when a non-empty 1055 * DATA stage buffer has been read (or even written). 1056 */ 1057 case MUSB_EP0_STAGE_STATUSIN: /* control-OUT status */ 1058 case MUSB_EP0_STAGE_STATUSOUT: /* control-IN status */ 1059 1060 csr |= MUSB_CSR0_P_SENDSTALL; 1061 musb_writew(regs, MUSB_CSR0, csr); 1062 musb->ep0_state = MUSB_EP0_STAGE_IDLE; 1063 musb->ackpend = 0; 1064 break; 1065 default: 1066 dev_dbg(musb->controller, "ep0 can't halt in state %d\n", musb->ep0_state); 1067 status = -EINVAL; 1068 } 1069 1070cleanup: 1071 spin_unlock_irqrestore(&musb->lock, flags); 1072 return status; 1073} 1074 1075const struct usb_ep_ops musb_g_ep0_ops = { 1076 .enable = musb_g_ep0_enable, 1077 .disable = musb_g_ep0_disable, 1078 .alloc_request = musb_alloc_request, 1079 .free_request = musb_free_request, 1080 .queue = musb_g_ep0_queue, 1081 .dequeue = musb_g_ep0_dequeue, 1082 .set_halt = musb_g_ep0_halt, 1083}; 1084