common.h revision f1407d5c66240b33d11a7f1a41d55ccf6a9d7647
1/* 2 * Renesas USB driver 3 * 4 * Copyright (C) 2011 Renesas Solutions Corp. 5 * Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> 6 * 7 * This program is distributed in the hope that it will be useful, 8 * but WITHOUT ANY WARRANTY; without even the implied warranty of 9 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 10 * GNU General Public License for more details. 11 * 12 * You should have received a copy of the GNU General Public License 13 * along with this program; if not, write to the Free Software 14 * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA 15 * 16 */ 17#ifndef RENESAS_USB_DRIVER_H 18#define RENESAS_USB_DRIVER_H 19 20#include <linux/platform_device.h> 21#include <linux/usb/renesas_usbhs.h> 22 23struct usbhs_priv; 24 25#include "./mod.h" 26#include "./pipe.h" 27 28/* 29 * 30 * register define 31 * 32 */ 33#define SYSCFG 0x0000 34#define BUSWAIT 0x0002 35#define DVSTCTR 0x0008 36#define CFIFO 0x0014 37#define CFIFOSEL 0x0020 38#define CFIFOCTR 0x0022 39#define INTENB0 0x0030 40#define INTENB1 0x0032 41#define BRDYENB 0x0036 42#define NRDYENB 0x0038 43#define BEMPENB 0x003A 44#define INTSTS0 0x0040 45#define INTSTS1 0x0042 46#define BRDYSTS 0x0046 47#define NRDYSTS 0x0048 48#define BEMPSTS 0x004A 49#define FRMNUM 0x004C 50#define USBREQ 0x0054 /* USB request type register */ 51#define USBVAL 0x0056 /* USB request value register */ 52#define USBINDX 0x0058 /* USB request index register */ 53#define USBLENG 0x005A /* USB request length register */ 54#define DCPCFG 0x005C 55#define DCPMAXP 0x005E 56#define DCPCTR 0x0060 57#define PIPESEL 0x0064 58#define PIPECFG 0x0068 59#define PIPEBUF 0x006A 60#define PIPEMAXP 0x006C 61#define PIPEPERI 0x006E 62#define PIPEnCTR 0x0070 63 64/* SYSCFG */ 65#define SCKE (1 << 10) /* USB Module Clock Enable */ 66#define HSE (1 << 7) /* High-Speed Operation Enable */ 67#define DCFM (1 << 6) /* Controller Function Select */ 68#define DRPD (1 << 5) /* D+ Line/D- Line Resistance Control */ 69#define DPRPU (1 << 4) /* D+ Line Resistance Control */ 70#define USBE (1 << 0) /* USB Module Operation Enable */ 71 72/* DVSTCTR */ 73#define EXTLP (1 << 10) /* Controls the EXTLP pin output state */ 74#define PWEN (1 << 9) /* Controls the PWEN pin output state */ 75#define RHST (0x7) /* Reset Handshake */ 76#define RHST_LOW_SPEED 1 /* Low-speed connection */ 77#define RHST_FULL_SPEED 2 /* Full-speed connection */ 78#define RHST_HIGH_SPEED 3 /* High-speed connection */ 79 80/* CFIFOSEL */ 81#define MBW_32 (0x2 << 10) /* CFIFO Port Access Bit Width */ 82 83/* CFIFOCTR */ 84#define BVAL (1 << 15) /* Buffer Memory Enable Flag */ 85#define BCLR (1 << 14) /* CPU buffer clear */ 86#define FRDY (1 << 13) /* FIFO Port Ready */ 87#define DTLN_MASK (0x0FFF) /* Receive Data Length */ 88 89/* INTENB0 */ 90#define VBSE (1 << 15) /* Enable IRQ VBUS_0 and VBUSIN_0 */ 91#define RSME (1 << 14) /* Enable IRQ Resume */ 92#define SOFE (1 << 13) /* Enable IRQ Frame Number Update */ 93#define DVSE (1 << 12) /* Enable IRQ Device State Transition */ 94#define CTRE (1 << 11) /* Enable IRQ Control Stage Transition */ 95#define BEMPE (1 << 10) /* Enable IRQ Buffer Empty */ 96#define NRDYE (1 << 9) /* Enable IRQ Buffer Not Ready Response */ 97#define BRDYE (1 << 8) /* Enable IRQ Buffer Ready */ 98 99/* INTENB1 */ 100#define BCHGE (1 << 14) /* USB Bus Change Interrupt Enable */ 101#define DTCHE (1 << 12) /* Disconnection Detect Interrupt Enable */ 102#define ATTCHE (1 << 11) /* Connection Detect Interrupt Enable */ 103#define EOFERRE (1 << 6) /* EOF Error Detect Interrupt Enable */ 104#define SIGNE (1 << 5) /* Setup Transaction Error Interrupt Enable */ 105#define SACKE (1 << 4) /* Setup Transaction ACK Interrupt Enable */ 106 107/* INTSTS0 */ 108#define DVST (1 << 12) /* Device State Transition Interrupt Status */ 109#define CTRT (1 << 11) /* Control Stage Interrupt Status */ 110#define BEMP (1 << 10) /* Buffer Empty Interrupt Status */ 111#define BRDY (1 << 8) /* Buffer Ready Interrupt Status */ 112#define VBSTS (1 << 7) /* VBUS_0 and VBUSIN_0 Input Status */ 113#define VALID (1 << 3) /* USB Request Receive */ 114 115#define DVSQ_MASK (0x3 << 4) /* Device State */ 116#define POWER_STATE (0 << 4) 117#define DEFAULT_STATE (1 << 4) 118#define ADDRESS_STATE (2 << 4) 119#define CONFIGURATION_STATE (3 << 4) 120 121#define CTSQ_MASK (0x7) /* Control Transfer Stage */ 122#define IDLE_SETUP_STAGE 0 /* Idle stage or setup stage */ 123#define READ_DATA_STAGE 1 /* Control read data stage */ 124#define READ_STATUS_STAGE 2 /* Control read status stage */ 125#define WRITE_DATA_STAGE 3 /* Control write data stage */ 126#define WRITE_STATUS_STAGE 4 /* Control write status stage */ 127#define NODATA_STATUS_STAGE 5 /* Control write NoData status stage */ 128#define SEQUENCE_ERROR 6 /* Control transfer sequence error */ 129 130/* PIPECFG */ 131/* DCPCFG */ 132#define TYPE_NONE (0 << 14) /* Transfer Type */ 133#define TYPE_BULK (1 << 14) 134#define TYPE_INT (2 << 14) 135#define TYPE_ISO (3 << 14) 136#define DBLB (1 << 9) /* Double Buffer Mode */ 137#define SHTNAK (1 << 7) /* Pipe Disable in Transfer End */ 138#define DIR_OUT (1 << 4) /* Transfer Direction */ 139 140/* PIPEMAXP */ 141/* DCPMAXP */ 142#define DEVSEL_MASK (0xF << 12) /* Device Select */ 143#define DCP_MAXP_MASK (0x7F) 144#define PIPE_MAXP_MASK (0x7FF) 145 146/* PIPEBUF */ 147#define BUFSIZE_SHIFT 10 148#define BUFSIZE_MASK (0x1F << BUFSIZE_SHIFT) 149#define BUFNMB_MASK (0xFF) 150 151/* PIPEnCTR */ 152/* DCPCTR */ 153#define BSTS (1 << 15) /* Buffer Status */ 154#define CSSTS (1 << 12) /* CSSTS Status */ 155#define SQCLR (1 << 8) /* Toggle Bit Clear */ 156#define ACLRM (1 << 9) /* Buffer Auto-Clear Mode */ 157#define PBUSY (1 << 5) /* Pipe Busy */ 158#define PID_MASK (0x3) /* Response PID */ 159#define PID_NAK 0 160#define PID_BUF 1 161#define PID_STALL10 2 162#define PID_STALL11 3 163 164#define CCPL (1 << 2) /* Control Transfer End Enable */ 165 166/* FRMNUM */ 167#define FRNM_MASK (0x7FF) 168 169/* 170 * struct 171 */ 172struct usbhs_priv { 173 174 void __iomem *base; 175 unsigned int irq; 176 177 struct renesas_usbhs_platform_callback *pfunc; 178 struct renesas_usbhs_driver_param *dparam; 179 180 struct work_struct notify_hotplug_work; 181 struct platform_device *pdev; 182 183 spinlock_t lock; 184 185 /* 186 * module control 187 */ 188 struct usbhs_mod_info mod_info; 189 190 /* 191 * pipe control 192 */ 193 struct usbhs_pipe_info pipe_info; 194}; 195 196/* 197 * common 198 */ 199u16 usbhs_read(struct usbhs_priv *priv, u32 reg); 200void usbhs_write(struct usbhs_priv *priv, u32 reg, u16 data); 201void usbhs_bset(struct usbhs_priv *priv, u32 reg, u16 mask, u16 data); 202 203/* 204 * sysconfig 205 */ 206void usbhs_sys_clock_ctrl(struct usbhs_priv *priv, int enable); 207void usbhs_sys_hispeed_ctrl(struct usbhs_priv *priv, int enable); 208void usbhs_sys_usb_ctrl(struct usbhs_priv *priv, int enable); 209void usbhs_sys_host_ctrl(struct usbhs_priv *priv, int enable); 210void usbhs_sys_function_ctrl(struct usbhs_priv *priv, int enable); 211 212/* 213 * frame 214 */ 215int usbhs_frame_get_num(struct usbhs_priv *priv); 216 217/* 218 * data 219 */ 220#define usbhs_get_dparam(priv, param) (priv->dparam->param) 221#define usbhs_priv_to_pdev(priv) (priv->pdev) 222#define usbhs_priv_to_dev(priv) (&priv->pdev->dev) 223#define usbhs_priv_to_lock(priv) (&priv->lock) 224 225#endif /* RENESAS_USB_DRIVER_H */ 226