whiteheat.c revision 60b33c133ca0b7c0b6072c87234b63fee6e80558
1/* 2 * USB ConnectTech WhiteHEAT driver 3 * 4 * Copyright (C) 2002 5 * Connect Tech Inc. 6 * 7 * Copyright (C) 1999 - 2001 8 * Greg Kroah-Hartman (greg@kroah.com) 9 * 10 * This program is free software; you can redistribute it and/or modify 11 * it under the terms of the GNU General Public License as published by 12 * the Free Software Foundation; either version 2 of the License, or 13 * (at your option) any later version. 14 * 15 * See Documentation/usb/usb-serial.txt for more information on using this 16 * driver 17 * 18 * (10/09/2002) Stuart MacDonald (stuartm@connecttech.com) 19 * Upgrade to full working driver 20 * 21 * (05/30/2001) gkh 22 * switched from using spinlock to a semaphore, which fixes lots of 23 * problems. 24 * 25 * (04/08/2001) gb 26 * Identify version on module load. 27 * 28 * 2001_Mar_19 gkh 29 * Fixed MOD_INC and MOD_DEC logic, the ability to open a port more 30 * than once, and the got the proper usb_device_id table entries so 31 * the driver works again. 32 * 33 * (11/01/2000) Adam J. Richter 34 * usb_device_id table support 35 * 36 * (10/05/2000) gkh 37 * Fixed bug with urb->dev not being set properly, now that the usb 38 * core needs it. 39 * 40 * (10/03/2000) smd 41 * firmware is improved to guard against crap sent to device 42 * firmware now replies CMD_FAILURE on bad things 43 * read_callback fix you provided for private info struct 44 * command_finished now indicates success or fail 45 * setup_port struct now packed to avoid gcc padding 46 * firmware uses 1 based port numbering, driver now handles that 47 * 48 * (09/11/2000) gkh 49 * Removed DEBUG #ifdefs with call to usb_serial_debug_data 50 * 51 * (07/19/2000) gkh 52 * Added module_init and module_exit functions to handle the fact that this 53 * driver is a loadable module now. 54 * Fixed bug with port->minor that was found by Al Borchers 55 * 56 * (07/04/2000) gkh 57 * Added support for port settings. Baud rate can now be changed. Line 58 * signals are not transferred to and from the tty layer yet, but things 59 * seem to be working well now. 60 * 61 * (05/04/2000) gkh 62 * First cut at open and close commands. Data can flow through the ports at 63 * default speeds now. 64 * 65 * (03/26/2000) gkh 66 * Split driver up into device specific pieces. 67 * 68 */ 69 70#include <linux/kernel.h> 71#include <linux/errno.h> 72#include <linux/init.h> 73#include <linux/slab.h> 74#include <linux/tty.h> 75#include <linux/tty_driver.h> 76#include <linux/tty_flip.h> 77#include <linux/module.h> 78#include <linux/spinlock.h> 79#include <linux/mutex.h> 80#include <linux/uaccess.h> 81#include <asm/termbits.h> 82#include <linux/usb.h> 83#include <linux/serial_reg.h> 84#include <linux/serial.h> 85#include <linux/usb/serial.h> 86#include <linux/firmware.h> 87#include <linux/ihex.h> 88#include "whiteheat.h" /* WhiteHEAT specific commands */ 89 90static int debug; 91 92#ifndef CMSPAR 93#define CMSPAR 0 94#endif 95 96/* 97 * Version Information 98 */ 99#define DRIVER_VERSION "v2.0" 100#define DRIVER_AUTHOR "Greg Kroah-Hartman <greg@kroah.com>, Stuart MacDonald <stuartm@connecttech.com>" 101#define DRIVER_DESC "USB ConnectTech WhiteHEAT driver" 102 103#define CONNECT_TECH_VENDOR_ID 0x0710 104#define CONNECT_TECH_FAKE_WHITE_HEAT_ID 0x0001 105#define CONNECT_TECH_WHITE_HEAT_ID 0x8001 106 107/* 108 ID tables for whiteheat are unusual, because we want to different 109 things for different versions of the device. Eventually, this 110 will be doable from a single table. But, for now, we define two 111 separate ID tables, and then a third table that combines them 112 just for the purpose of exporting the autoloading information. 113*/ 114static const struct usb_device_id id_table_std[] = { 115 { USB_DEVICE(CONNECT_TECH_VENDOR_ID, CONNECT_TECH_WHITE_HEAT_ID) }, 116 { } /* Terminating entry */ 117}; 118 119static const struct usb_device_id id_table_prerenumeration[] = { 120 { USB_DEVICE(CONNECT_TECH_VENDOR_ID, CONNECT_TECH_FAKE_WHITE_HEAT_ID) }, 121 { } /* Terminating entry */ 122}; 123 124static const struct usb_device_id id_table_combined[] = { 125 { USB_DEVICE(CONNECT_TECH_VENDOR_ID, CONNECT_TECH_WHITE_HEAT_ID) }, 126 { USB_DEVICE(CONNECT_TECH_VENDOR_ID, CONNECT_TECH_FAKE_WHITE_HEAT_ID) }, 127 { } /* Terminating entry */ 128}; 129 130MODULE_DEVICE_TABLE(usb, id_table_combined); 131 132static struct usb_driver whiteheat_driver = { 133 .name = "whiteheat", 134 .probe = usb_serial_probe, 135 .disconnect = usb_serial_disconnect, 136 .id_table = id_table_combined, 137 .no_dynamic_id = 1, 138}; 139 140/* function prototypes for the Connect Tech WhiteHEAT prerenumeration device */ 141static int whiteheat_firmware_download(struct usb_serial *serial, 142 const struct usb_device_id *id); 143static int whiteheat_firmware_attach(struct usb_serial *serial); 144 145/* function prototypes for the Connect Tech WhiteHEAT serial converter */ 146static int whiteheat_attach(struct usb_serial *serial); 147static void whiteheat_release(struct usb_serial *serial); 148static int whiteheat_open(struct tty_struct *tty, 149 struct usb_serial_port *port); 150static void whiteheat_close(struct usb_serial_port *port); 151static int whiteheat_write(struct tty_struct *tty, 152 struct usb_serial_port *port, 153 const unsigned char *buf, int count); 154static int whiteheat_write_room(struct tty_struct *tty); 155static int whiteheat_ioctl(struct tty_struct *tty, struct file *file, 156 unsigned int cmd, unsigned long arg); 157static void whiteheat_set_termios(struct tty_struct *tty, 158 struct usb_serial_port *port, struct ktermios *old); 159static int whiteheat_tiocmget(struct tty_struct *tty); 160static int whiteheat_tiocmset(struct tty_struct *tty, struct file *file, 161 unsigned int set, unsigned int clear); 162static void whiteheat_break_ctl(struct tty_struct *tty, int break_state); 163static int whiteheat_chars_in_buffer(struct tty_struct *tty); 164static void whiteheat_throttle(struct tty_struct *tty); 165static void whiteheat_unthrottle(struct tty_struct *tty); 166static void whiteheat_read_callback(struct urb *urb); 167static void whiteheat_write_callback(struct urb *urb); 168 169static struct usb_serial_driver whiteheat_fake_device = { 170 .driver = { 171 .owner = THIS_MODULE, 172 .name = "whiteheatnofirm", 173 }, 174 .description = "Connect Tech - WhiteHEAT - (prerenumeration)", 175 .usb_driver = &whiteheat_driver, 176 .id_table = id_table_prerenumeration, 177 .num_ports = 1, 178 .probe = whiteheat_firmware_download, 179 .attach = whiteheat_firmware_attach, 180}; 181 182static struct usb_serial_driver whiteheat_device = { 183 .driver = { 184 .owner = THIS_MODULE, 185 .name = "whiteheat", 186 }, 187 .description = "Connect Tech - WhiteHEAT", 188 .usb_driver = &whiteheat_driver, 189 .id_table = id_table_std, 190 .num_ports = 4, 191 .attach = whiteheat_attach, 192 .release = whiteheat_release, 193 .open = whiteheat_open, 194 .close = whiteheat_close, 195 .write = whiteheat_write, 196 .write_room = whiteheat_write_room, 197 .ioctl = whiteheat_ioctl, 198 .set_termios = whiteheat_set_termios, 199 .break_ctl = whiteheat_break_ctl, 200 .tiocmget = whiteheat_tiocmget, 201 .tiocmset = whiteheat_tiocmset, 202 .chars_in_buffer = whiteheat_chars_in_buffer, 203 .throttle = whiteheat_throttle, 204 .unthrottle = whiteheat_unthrottle, 205 .read_bulk_callback = whiteheat_read_callback, 206 .write_bulk_callback = whiteheat_write_callback, 207}; 208 209 210struct whiteheat_command_private { 211 struct mutex mutex; 212 __u8 port_running; 213 __u8 command_finished; 214 wait_queue_head_t wait_command; /* for handling sleeping whilst 215 waiting for a command to 216 finish */ 217 __u8 result_buffer[64]; 218}; 219 220 221#define THROTTLED 0x01 222#define ACTUALLY_THROTTLED 0x02 223 224static int urb_pool_size = 8; 225 226struct whiteheat_urb_wrap { 227 struct list_head list; 228 struct urb *urb; 229}; 230 231struct whiteheat_private { 232 spinlock_t lock; 233 __u8 flags; 234 __u8 mcr; /* FIXME: no locking on mcr */ 235 struct list_head rx_urbs_free; 236 struct list_head rx_urbs_submitted; 237 struct list_head rx_urb_q; 238 struct work_struct rx_work; 239 struct usb_serial_port *port; 240 struct list_head tx_urbs_free; 241 struct list_head tx_urbs_submitted; 242 struct mutex deathwarrant; 243}; 244 245 246/* local function prototypes */ 247static int start_command_port(struct usb_serial *serial); 248static void stop_command_port(struct usb_serial *serial); 249static void command_port_write_callback(struct urb *urb); 250static void command_port_read_callback(struct urb *urb); 251 252static int start_port_read(struct usb_serial_port *port); 253static struct whiteheat_urb_wrap *urb_to_wrap(struct urb *urb, 254 struct list_head *head); 255static struct list_head *list_first(struct list_head *head); 256static void rx_data_softint(struct work_struct *work); 257 258static int firm_send_command(struct usb_serial_port *port, __u8 command, 259 __u8 *data, __u8 datasize); 260static int firm_open(struct usb_serial_port *port); 261static int firm_close(struct usb_serial_port *port); 262static void firm_setup_port(struct tty_struct *tty); 263static int firm_set_rts(struct usb_serial_port *port, __u8 onoff); 264static int firm_set_dtr(struct usb_serial_port *port, __u8 onoff); 265static int firm_set_break(struct usb_serial_port *port, __u8 onoff); 266static int firm_purge(struct usb_serial_port *port, __u8 rxtx); 267static int firm_get_dtr_rts(struct usb_serial_port *port); 268static int firm_report_tx_done(struct usb_serial_port *port); 269 270 271#define COMMAND_PORT 4 272#define COMMAND_TIMEOUT (2*HZ) /* 2 second timeout for a command */ 273#define COMMAND_TIMEOUT_MS 2000 274#define CLOSING_DELAY (30 * HZ) 275 276 277/***************************************************************************** 278 * Connect Tech's White Heat prerenumeration driver functions 279 *****************************************************************************/ 280 281/* steps to download the firmware to the WhiteHEAT device: 282 - hold the reset (by writing to the reset bit of the CPUCS register) 283 - download the VEND_AX.HEX file to the chip using VENDOR_REQUEST-ANCHOR_LOAD 284 - release the reset (by writing to the CPUCS register) 285 - download the WH.HEX file for all addresses greater than 0x1b3f using 286 VENDOR_REQUEST-ANCHOR_EXTERNAL_RAM_LOAD 287 - hold the reset 288 - download the WH.HEX file for all addresses less than 0x1b40 using 289 VENDOR_REQUEST_ANCHOR_LOAD 290 - release the reset 291 - device renumerated itself and comes up as new device id with all 292 firmware download completed. 293*/ 294static int whiteheat_firmware_download(struct usb_serial *serial, 295 const struct usb_device_id *id) 296{ 297 int response, ret = -ENOENT; 298 const struct firmware *loader_fw = NULL, *firmware_fw = NULL; 299 const struct ihex_binrec *record; 300 301 dbg("%s", __func__); 302 303 if (request_ihex_firmware(&firmware_fw, "whiteheat.fw", 304 &serial->dev->dev)) { 305 dev_err(&serial->dev->dev, 306 "%s - request \"whiteheat.fw\" failed\n", __func__); 307 goto out; 308 } 309 if (request_ihex_firmware(&loader_fw, "whiteheat_loader.fw", 310 &serial->dev->dev)) { 311 dev_err(&serial->dev->dev, 312 "%s - request \"whiteheat_loader.fw\" failed\n", 313 __func__); 314 goto out; 315 } 316 ret = 0; 317 response = ezusb_set_reset (serial, 1); 318 319 record = (const struct ihex_binrec *)loader_fw->data; 320 while (record) { 321 response = ezusb_writememory (serial, be32_to_cpu(record->addr), 322 (unsigned char *)record->data, 323 be16_to_cpu(record->len), 0xa0); 324 if (response < 0) { 325 dev_err(&serial->dev->dev, "%s - ezusb_writememory " 326 "failed for loader (%d %04X %p %d)\n", 327 __func__, response, be32_to_cpu(record->addr), 328 record->data, be16_to_cpu(record->len)); 329 break; 330 } 331 record = ihex_next_binrec(record); 332 } 333 334 response = ezusb_set_reset(serial, 0); 335 336 record = (const struct ihex_binrec *)firmware_fw->data; 337 while (record && be32_to_cpu(record->addr) < 0x1b40) 338 record = ihex_next_binrec(record); 339 while (record) { 340 response = ezusb_writememory (serial, be32_to_cpu(record->addr), 341 (unsigned char *)record->data, 342 be16_to_cpu(record->len), 0xa3); 343 if (response < 0) { 344 dev_err(&serial->dev->dev, "%s - ezusb_writememory " 345 "failed for first firmware step " 346 "(%d %04X %p %d)\n", __func__, response, 347 be32_to_cpu(record->addr), record->data, 348 be16_to_cpu(record->len)); 349 break; 350 } 351 ++record; 352 } 353 354 response = ezusb_set_reset(serial, 1); 355 356 record = (const struct ihex_binrec *)firmware_fw->data; 357 while (record && be32_to_cpu(record->addr) < 0x1b40) { 358 response = ezusb_writememory (serial, be32_to_cpu(record->addr), 359 (unsigned char *)record->data, 360 be16_to_cpu(record->len), 0xa0); 361 if (response < 0) { 362 dev_err(&serial->dev->dev, "%s - ezusb_writememory " 363 "failed for second firmware step " 364 "(%d %04X %p %d)\n", __func__, response, 365 be32_to_cpu(record->addr), record->data, 366 be16_to_cpu(record->len)); 367 break; 368 } 369 ++record; 370 } 371 ret = 0; 372 response = ezusb_set_reset (serial, 0); 373 out: 374 release_firmware(loader_fw); 375 release_firmware(firmware_fw); 376 return ret; 377} 378 379 380static int whiteheat_firmware_attach(struct usb_serial *serial) 381{ 382 /* We want this device to fail to have a driver assigned to it */ 383 return 1; 384} 385 386 387/***************************************************************************** 388 * Connect Tech's White Heat serial driver functions 389 *****************************************************************************/ 390static int whiteheat_attach(struct usb_serial *serial) 391{ 392 struct usb_serial_port *command_port; 393 struct whiteheat_command_private *command_info; 394 struct usb_serial_port *port; 395 struct whiteheat_private *info; 396 struct whiteheat_hw_info *hw_info; 397 int pipe; 398 int ret; 399 int alen; 400 __u8 *command; 401 __u8 *result; 402 int i; 403 int j; 404 struct urb *urb; 405 int buf_size; 406 struct whiteheat_urb_wrap *wrap; 407 struct list_head *tmp; 408 409 command_port = serial->port[COMMAND_PORT]; 410 411 pipe = usb_sndbulkpipe(serial->dev, 412 command_port->bulk_out_endpointAddress); 413 command = kmalloc(2, GFP_KERNEL); 414 if (!command) 415 goto no_command_buffer; 416 command[0] = WHITEHEAT_GET_HW_INFO; 417 command[1] = 0; 418 419 result = kmalloc(sizeof(*hw_info) + 1, GFP_KERNEL); 420 if (!result) 421 goto no_result_buffer; 422 /* 423 * When the module is reloaded the firmware is still there and 424 * the endpoints are still in the usb core unchanged. This is the 425 * unlinking bug in disguise. Same for the call below. 426 */ 427 usb_clear_halt(serial->dev, pipe); 428 ret = usb_bulk_msg(serial->dev, pipe, command, 2, 429 &alen, COMMAND_TIMEOUT_MS); 430 if (ret) { 431 dev_err(&serial->dev->dev, "%s: Couldn't send command [%d]\n", 432 serial->type->description, ret); 433 goto no_firmware; 434 } else if (alen != 2) { 435 dev_err(&serial->dev->dev, "%s: Send command incomplete [%d]\n", 436 serial->type->description, alen); 437 goto no_firmware; 438 } 439 440 pipe = usb_rcvbulkpipe(serial->dev, 441 command_port->bulk_in_endpointAddress); 442 /* See the comment on the usb_clear_halt() above */ 443 usb_clear_halt(serial->dev, pipe); 444 ret = usb_bulk_msg(serial->dev, pipe, result, 445 sizeof(*hw_info) + 1, &alen, COMMAND_TIMEOUT_MS); 446 if (ret) { 447 dev_err(&serial->dev->dev, "%s: Couldn't get results [%d]\n", 448 serial->type->description, ret); 449 goto no_firmware; 450 } else if (alen != sizeof(*hw_info) + 1) { 451 dev_err(&serial->dev->dev, "%s: Get results incomplete [%d]\n", 452 serial->type->description, alen); 453 goto no_firmware; 454 } else if (result[0] != command[0]) { 455 dev_err(&serial->dev->dev, "%s: Command failed [%d]\n", 456 serial->type->description, result[0]); 457 goto no_firmware; 458 } 459 460 hw_info = (struct whiteheat_hw_info *)&result[1]; 461 462 dev_info(&serial->dev->dev, "%s: Driver %s: Firmware v%d.%02d\n", 463 serial->type->description, DRIVER_VERSION, 464 hw_info->sw_major_rev, hw_info->sw_minor_rev); 465 466 for (i = 0; i < serial->num_ports; i++) { 467 port = serial->port[i]; 468 469 info = kmalloc(sizeof(struct whiteheat_private), GFP_KERNEL); 470 if (info == NULL) { 471 dev_err(&port->dev, 472 "%s: Out of memory for port structures\n", 473 serial->type->description); 474 goto no_private; 475 } 476 477 spin_lock_init(&info->lock); 478 mutex_init(&info->deathwarrant); 479 info->flags = 0; 480 info->mcr = 0; 481 INIT_WORK(&info->rx_work, rx_data_softint); 482 info->port = port; 483 484 INIT_LIST_HEAD(&info->rx_urbs_free); 485 INIT_LIST_HEAD(&info->rx_urbs_submitted); 486 INIT_LIST_HEAD(&info->rx_urb_q); 487 INIT_LIST_HEAD(&info->tx_urbs_free); 488 INIT_LIST_HEAD(&info->tx_urbs_submitted); 489 490 for (j = 0; j < urb_pool_size; j++) { 491 urb = usb_alloc_urb(0, GFP_KERNEL); 492 if (!urb) { 493 dev_err(&port->dev, "No free urbs available\n"); 494 goto no_rx_urb; 495 } 496 buf_size = port->read_urb->transfer_buffer_length; 497 urb->transfer_buffer = kmalloc(buf_size, GFP_KERNEL); 498 if (!urb->transfer_buffer) { 499 dev_err(&port->dev, 500 "Couldn't allocate urb buffer\n"); 501 goto no_rx_buf; 502 } 503 wrap = kmalloc(sizeof(*wrap), GFP_KERNEL); 504 if (!wrap) { 505 dev_err(&port->dev, 506 "Couldn't allocate urb wrapper\n"); 507 goto no_rx_wrap; 508 } 509 usb_fill_bulk_urb(urb, serial->dev, 510 usb_rcvbulkpipe(serial->dev, 511 port->bulk_in_endpointAddress), 512 urb->transfer_buffer, buf_size, 513 whiteheat_read_callback, port); 514 wrap->urb = urb; 515 list_add(&wrap->list, &info->rx_urbs_free); 516 517 urb = usb_alloc_urb(0, GFP_KERNEL); 518 if (!urb) { 519 dev_err(&port->dev, "No free urbs available\n"); 520 goto no_tx_urb; 521 } 522 buf_size = port->write_urb->transfer_buffer_length; 523 urb->transfer_buffer = kmalloc(buf_size, GFP_KERNEL); 524 if (!urb->transfer_buffer) { 525 dev_err(&port->dev, 526 "Couldn't allocate urb buffer\n"); 527 goto no_tx_buf; 528 } 529 wrap = kmalloc(sizeof(*wrap), GFP_KERNEL); 530 if (!wrap) { 531 dev_err(&port->dev, 532 "Couldn't allocate urb wrapper\n"); 533 goto no_tx_wrap; 534 } 535 usb_fill_bulk_urb(urb, serial->dev, 536 usb_sndbulkpipe(serial->dev, 537 port->bulk_out_endpointAddress), 538 urb->transfer_buffer, buf_size, 539 whiteheat_write_callback, port); 540 wrap->urb = urb; 541 list_add(&wrap->list, &info->tx_urbs_free); 542 } 543 544 usb_set_serial_port_data(port, info); 545 } 546 547 command_info = kmalloc(sizeof(struct whiteheat_command_private), 548 GFP_KERNEL); 549 if (command_info == NULL) { 550 dev_err(&serial->dev->dev, 551 "%s: Out of memory for port structures\n", 552 serial->type->description); 553 goto no_command_private; 554 } 555 556 mutex_init(&command_info->mutex); 557 command_info->port_running = 0; 558 init_waitqueue_head(&command_info->wait_command); 559 usb_set_serial_port_data(command_port, command_info); 560 command_port->write_urb->complete = command_port_write_callback; 561 command_port->read_urb->complete = command_port_read_callback; 562 kfree(result); 563 kfree(command); 564 565 return 0; 566 567no_firmware: 568 /* Firmware likely not running */ 569 dev_err(&serial->dev->dev, 570 "%s: Unable to retrieve firmware version, try replugging\n", 571 serial->type->description); 572 dev_err(&serial->dev->dev, 573 "%s: If the firmware is not running (status led not blinking)\n", 574 serial->type->description); 575 dev_err(&serial->dev->dev, 576 "%s: please contact support@connecttech.com\n", 577 serial->type->description); 578 kfree(result); 579 return -ENODEV; 580 581no_command_private: 582 for (i = serial->num_ports - 1; i >= 0; i--) { 583 port = serial->port[i]; 584 info = usb_get_serial_port_data(port); 585 for (j = urb_pool_size - 1; j >= 0; j--) { 586 tmp = list_first(&info->tx_urbs_free); 587 list_del(tmp); 588 wrap = list_entry(tmp, struct whiteheat_urb_wrap, list); 589 urb = wrap->urb; 590 kfree(wrap); 591no_tx_wrap: 592 kfree(urb->transfer_buffer); 593no_tx_buf: 594 usb_free_urb(urb); 595no_tx_urb: 596 tmp = list_first(&info->rx_urbs_free); 597 list_del(tmp); 598 wrap = list_entry(tmp, struct whiteheat_urb_wrap, list); 599 urb = wrap->urb; 600 kfree(wrap); 601no_rx_wrap: 602 kfree(urb->transfer_buffer); 603no_rx_buf: 604 usb_free_urb(urb); 605no_rx_urb: 606 ; 607 } 608 kfree(info); 609no_private: 610 ; 611 } 612 kfree(result); 613no_result_buffer: 614 kfree(command); 615no_command_buffer: 616 return -ENOMEM; 617} 618 619 620static void whiteheat_release(struct usb_serial *serial) 621{ 622 struct usb_serial_port *command_port; 623 struct usb_serial_port *port; 624 struct whiteheat_private *info; 625 struct whiteheat_urb_wrap *wrap; 626 struct urb *urb; 627 struct list_head *tmp; 628 struct list_head *tmp2; 629 int i; 630 631 dbg("%s", __func__); 632 633 /* free up our private data for our command port */ 634 command_port = serial->port[COMMAND_PORT]; 635 kfree(usb_get_serial_port_data(command_port)); 636 637 for (i = 0; i < serial->num_ports; i++) { 638 port = serial->port[i]; 639 info = usb_get_serial_port_data(port); 640 list_for_each_safe(tmp, tmp2, &info->rx_urbs_free) { 641 list_del(tmp); 642 wrap = list_entry(tmp, struct whiteheat_urb_wrap, list); 643 urb = wrap->urb; 644 kfree(wrap); 645 kfree(urb->transfer_buffer); 646 usb_free_urb(urb); 647 } 648 list_for_each_safe(tmp, tmp2, &info->tx_urbs_free) { 649 list_del(tmp); 650 wrap = list_entry(tmp, struct whiteheat_urb_wrap, list); 651 urb = wrap->urb; 652 kfree(wrap); 653 kfree(urb->transfer_buffer); 654 usb_free_urb(urb); 655 } 656 kfree(info); 657 } 658} 659 660static int whiteheat_open(struct tty_struct *tty, struct usb_serial_port *port) 661{ 662 int retval = 0; 663 664 dbg("%s - port %d", __func__, port->number); 665 666 retval = start_command_port(port->serial); 667 if (retval) 668 goto exit; 669 670 if (tty) 671 tty->low_latency = 1; 672 673 /* send an open port command */ 674 retval = firm_open(port); 675 if (retval) { 676 stop_command_port(port->serial); 677 goto exit; 678 } 679 680 retval = firm_purge(port, WHITEHEAT_PURGE_RX | WHITEHEAT_PURGE_TX); 681 if (retval) { 682 firm_close(port); 683 stop_command_port(port->serial); 684 goto exit; 685 } 686 687 if (tty) 688 firm_setup_port(tty); 689 690 /* Work around HCD bugs */ 691 usb_clear_halt(port->serial->dev, port->read_urb->pipe); 692 usb_clear_halt(port->serial->dev, port->write_urb->pipe); 693 694 /* Start reading from the device */ 695 retval = start_port_read(port); 696 if (retval) { 697 dev_err(&port->dev, 698 "%s - failed submitting read urb, error %d\n", 699 __func__, retval); 700 firm_close(port); 701 stop_command_port(port->serial); 702 goto exit; 703 } 704 705exit: 706 dbg("%s - exit, retval = %d", __func__, retval); 707 return retval; 708} 709 710 711static void whiteheat_close(struct usb_serial_port *port) 712{ 713 struct whiteheat_private *info = usb_get_serial_port_data(port); 714 struct whiteheat_urb_wrap *wrap; 715 struct urb *urb; 716 struct list_head *tmp; 717 struct list_head *tmp2; 718 719 dbg("%s - port %d", __func__, port->number); 720 721 firm_report_tx_done(port); 722 firm_close(port); 723 724 /* shutdown our bulk reads and writes */ 725 mutex_lock(&info->deathwarrant); 726 spin_lock_irq(&info->lock); 727 list_for_each_safe(tmp, tmp2, &info->rx_urbs_submitted) { 728 wrap = list_entry(tmp, struct whiteheat_urb_wrap, list); 729 urb = wrap->urb; 730 list_del(tmp); 731 spin_unlock_irq(&info->lock); 732 usb_kill_urb(urb); 733 spin_lock_irq(&info->lock); 734 list_add(tmp, &info->rx_urbs_free); 735 } 736 list_for_each_safe(tmp, tmp2, &info->rx_urb_q) 737 list_move(tmp, &info->rx_urbs_free); 738 list_for_each_safe(tmp, tmp2, &info->tx_urbs_submitted) { 739 wrap = list_entry(tmp, struct whiteheat_urb_wrap, list); 740 urb = wrap->urb; 741 list_del(tmp); 742 spin_unlock_irq(&info->lock); 743 usb_kill_urb(urb); 744 spin_lock_irq(&info->lock); 745 list_add(tmp, &info->tx_urbs_free); 746 } 747 spin_unlock_irq(&info->lock); 748 mutex_unlock(&info->deathwarrant); 749 stop_command_port(port->serial); 750} 751 752 753static int whiteheat_write(struct tty_struct *tty, 754 struct usb_serial_port *port, const unsigned char *buf, int count) 755{ 756 struct usb_serial *serial = port->serial; 757 struct whiteheat_private *info = usb_get_serial_port_data(port); 758 struct whiteheat_urb_wrap *wrap; 759 struct urb *urb; 760 int result; 761 int bytes; 762 int sent = 0; 763 unsigned long flags; 764 struct list_head *tmp; 765 766 dbg("%s - port %d", __func__, port->number); 767 768 if (count == 0) { 769 dbg("%s - write request of 0 bytes", __func__); 770 return (0); 771 } 772 773 while (count) { 774 spin_lock_irqsave(&info->lock, flags); 775 if (list_empty(&info->tx_urbs_free)) { 776 spin_unlock_irqrestore(&info->lock, flags); 777 break; 778 } 779 tmp = list_first(&info->tx_urbs_free); 780 list_del(tmp); 781 spin_unlock_irqrestore(&info->lock, flags); 782 783 wrap = list_entry(tmp, struct whiteheat_urb_wrap, list); 784 urb = wrap->urb; 785 bytes = (count > port->bulk_out_size) ? 786 port->bulk_out_size : count; 787 memcpy(urb->transfer_buffer, buf + sent, bytes); 788 789 usb_serial_debug_data(debug, &port->dev, 790 __func__, bytes, urb->transfer_buffer); 791 792 urb->dev = serial->dev; 793 urb->transfer_buffer_length = bytes; 794 result = usb_submit_urb(urb, GFP_ATOMIC); 795 if (result) { 796 dev_err(&port->dev, 797 "%s - failed submitting write urb, error %d\n", 798 __func__, result); 799 sent = result; 800 spin_lock_irqsave(&info->lock, flags); 801 list_add(tmp, &info->tx_urbs_free); 802 spin_unlock_irqrestore(&info->lock, flags); 803 break; 804 } else { 805 sent += bytes; 806 count -= bytes; 807 spin_lock_irqsave(&info->lock, flags); 808 list_add(tmp, &info->tx_urbs_submitted); 809 spin_unlock_irqrestore(&info->lock, flags); 810 } 811 } 812 813 return sent; 814} 815 816static int whiteheat_write_room(struct tty_struct *tty) 817{ 818 struct usb_serial_port *port = tty->driver_data; 819 struct whiteheat_private *info = usb_get_serial_port_data(port); 820 struct list_head *tmp; 821 int room = 0; 822 unsigned long flags; 823 824 dbg("%s - port %d", __func__, port->number); 825 826 spin_lock_irqsave(&info->lock, flags); 827 list_for_each(tmp, &info->tx_urbs_free) 828 room++; 829 spin_unlock_irqrestore(&info->lock, flags); 830 room *= port->bulk_out_size; 831 832 dbg("%s - returns %d", __func__, room); 833 return (room); 834} 835 836static int whiteheat_tiocmget(struct tty_struct *tty) 837{ 838 struct usb_serial_port *port = tty->driver_data; 839 struct whiteheat_private *info = usb_get_serial_port_data(port); 840 unsigned int modem_signals = 0; 841 842 dbg("%s - port %d", __func__, port->number); 843 844 firm_get_dtr_rts(port); 845 if (info->mcr & UART_MCR_DTR) 846 modem_signals |= TIOCM_DTR; 847 if (info->mcr & UART_MCR_RTS) 848 modem_signals |= TIOCM_RTS; 849 850 return modem_signals; 851} 852 853static int whiteheat_tiocmset(struct tty_struct *tty, struct file *file, 854 unsigned int set, unsigned int clear) 855{ 856 struct usb_serial_port *port = tty->driver_data; 857 struct whiteheat_private *info = usb_get_serial_port_data(port); 858 859 dbg("%s - port %d", __func__, port->number); 860 861 if (set & TIOCM_RTS) 862 info->mcr |= UART_MCR_RTS; 863 if (set & TIOCM_DTR) 864 info->mcr |= UART_MCR_DTR; 865 866 if (clear & TIOCM_RTS) 867 info->mcr &= ~UART_MCR_RTS; 868 if (clear & TIOCM_DTR) 869 info->mcr &= ~UART_MCR_DTR; 870 871 firm_set_dtr(port, info->mcr & UART_MCR_DTR); 872 firm_set_rts(port, info->mcr & UART_MCR_RTS); 873 return 0; 874} 875 876 877static int whiteheat_ioctl(struct tty_struct *tty, struct file *file, 878 unsigned int cmd, unsigned long arg) 879{ 880 struct usb_serial_port *port = tty->driver_data; 881 struct serial_struct serstruct; 882 void __user *user_arg = (void __user *)arg; 883 884 dbg("%s - port %d, cmd 0x%.4x", __func__, port->number, cmd); 885 886 switch (cmd) { 887 case TIOCGSERIAL: 888 memset(&serstruct, 0, sizeof(serstruct)); 889 serstruct.type = PORT_16654; 890 serstruct.line = port->serial->minor; 891 serstruct.port = port->number; 892 serstruct.flags = ASYNC_SKIP_TEST | ASYNC_AUTO_IRQ; 893 serstruct.xmit_fifo_size = port->bulk_out_size; 894 serstruct.custom_divisor = 0; 895 serstruct.baud_base = 460800; 896 serstruct.close_delay = CLOSING_DELAY; 897 serstruct.closing_wait = CLOSING_DELAY; 898 899 if (copy_to_user(user_arg, &serstruct, sizeof(serstruct))) 900 return -EFAULT; 901 break; 902 default: 903 break; 904 } 905 906 return -ENOIOCTLCMD; 907} 908 909 910static void whiteheat_set_termios(struct tty_struct *tty, 911 struct usb_serial_port *port, struct ktermios *old_termios) 912{ 913 firm_setup_port(tty); 914} 915 916static void whiteheat_break_ctl(struct tty_struct *tty, int break_state) 917{ 918 struct usb_serial_port *port = tty->driver_data; 919 firm_set_break(port, break_state); 920} 921 922 923static int whiteheat_chars_in_buffer(struct tty_struct *tty) 924{ 925 struct usb_serial_port *port = tty->driver_data; 926 struct whiteheat_private *info = usb_get_serial_port_data(port); 927 struct list_head *tmp; 928 struct whiteheat_urb_wrap *wrap; 929 int chars = 0; 930 unsigned long flags; 931 932 dbg("%s - port %d", __func__, port->number); 933 934 spin_lock_irqsave(&info->lock, flags); 935 list_for_each(tmp, &info->tx_urbs_submitted) { 936 wrap = list_entry(tmp, struct whiteheat_urb_wrap, list); 937 chars += wrap->urb->transfer_buffer_length; 938 } 939 spin_unlock_irqrestore(&info->lock, flags); 940 941 dbg("%s - returns %d", __func__, chars); 942 return chars; 943} 944 945 946static void whiteheat_throttle(struct tty_struct *tty) 947{ 948 struct usb_serial_port *port = tty->driver_data; 949 struct whiteheat_private *info = usb_get_serial_port_data(port); 950 951 dbg("%s - port %d", __func__, port->number); 952 953 spin_lock_irq(&info->lock); 954 info->flags |= THROTTLED; 955 spin_unlock_irq(&info->lock); 956} 957 958 959static void whiteheat_unthrottle(struct tty_struct *tty) 960{ 961 struct usb_serial_port *port = tty->driver_data; 962 struct whiteheat_private *info = usb_get_serial_port_data(port); 963 int actually_throttled; 964 965 dbg("%s - port %d", __func__, port->number); 966 967 spin_lock_irq(&info->lock); 968 actually_throttled = info->flags & ACTUALLY_THROTTLED; 969 info->flags &= ~(THROTTLED | ACTUALLY_THROTTLED); 970 spin_unlock_irq(&info->lock); 971 972 if (actually_throttled) 973 rx_data_softint(&info->rx_work); 974} 975 976 977/***************************************************************************** 978 * Connect Tech's White Heat callback routines 979 *****************************************************************************/ 980static void command_port_write_callback(struct urb *urb) 981{ 982 int status = urb->status; 983 984 dbg("%s", __func__); 985 986 if (status) { 987 dbg("nonzero urb status: %d", status); 988 return; 989 } 990} 991 992 993static void command_port_read_callback(struct urb *urb) 994{ 995 struct usb_serial_port *command_port = urb->context; 996 struct whiteheat_command_private *command_info; 997 int status = urb->status; 998 unsigned char *data = urb->transfer_buffer; 999 int result; 1000 1001 dbg("%s", __func__); 1002 1003 command_info = usb_get_serial_port_data(command_port); 1004 if (!command_info) { 1005 dbg("%s - command_info is NULL, exiting.", __func__); 1006 return; 1007 } 1008 if (status) { 1009 dbg("%s - nonzero urb status: %d", __func__, status); 1010 if (status != -ENOENT) 1011 command_info->command_finished = WHITEHEAT_CMD_FAILURE; 1012 wake_up(&command_info->wait_command); 1013 return; 1014 } 1015 1016 usb_serial_debug_data(debug, &command_port->dev, 1017 __func__, urb->actual_length, data); 1018 1019 if (data[0] == WHITEHEAT_CMD_COMPLETE) { 1020 command_info->command_finished = WHITEHEAT_CMD_COMPLETE; 1021 wake_up(&command_info->wait_command); 1022 } else if (data[0] == WHITEHEAT_CMD_FAILURE) { 1023 command_info->command_finished = WHITEHEAT_CMD_FAILURE; 1024 wake_up(&command_info->wait_command); 1025 } else if (data[0] == WHITEHEAT_EVENT) { 1026 /* These are unsolicited reports from the firmware, hence no 1027 waiting command to wakeup */ 1028 dbg("%s - event received", __func__); 1029 } else if (data[0] == WHITEHEAT_GET_DTR_RTS) { 1030 memcpy(command_info->result_buffer, &data[1], 1031 urb->actual_length - 1); 1032 command_info->command_finished = WHITEHEAT_CMD_COMPLETE; 1033 wake_up(&command_info->wait_command); 1034 } else 1035 dbg("%s - bad reply from firmware", __func__); 1036 1037 /* Continue trying to always read */ 1038 command_port->read_urb->dev = command_port->serial->dev; 1039 result = usb_submit_urb(command_port->read_urb, GFP_ATOMIC); 1040 if (result) 1041 dbg("%s - failed resubmitting read urb, error %d", 1042 __func__, result); 1043} 1044 1045 1046static void whiteheat_read_callback(struct urb *urb) 1047{ 1048 struct usb_serial_port *port = urb->context; 1049 struct whiteheat_urb_wrap *wrap; 1050 unsigned char *data = urb->transfer_buffer; 1051 struct whiteheat_private *info = usb_get_serial_port_data(port); 1052 int status = urb->status; 1053 1054 dbg("%s - port %d", __func__, port->number); 1055 1056 spin_lock(&info->lock); 1057 wrap = urb_to_wrap(urb, &info->rx_urbs_submitted); 1058 if (!wrap) { 1059 spin_unlock(&info->lock); 1060 dev_err(&port->dev, "%s - Not my urb!\n", __func__); 1061 return; 1062 } 1063 list_del(&wrap->list); 1064 spin_unlock(&info->lock); 1065 1066 if (status) { 1067 dbg("%s - nonzero read bulk status received: %d", 1068 __func__, status); 1069 spin_lock(&info->lock); 1070 list_add(&wrap->list, &info->rx_urbs_free); 1071 spin_unlock(&info->lock); 1072 return; 1073 } 1074 1075 usb_serial_debug_data(debug, &port->dev, 1076 __func__, urb->actual_length, data); 1077 1078 spin_lock(&info->lock); 1079 list_add_tail(&wrap->list, &info->rx_urb_q); 1080 if (info->flags & THROTTLED) { 1081 info->flags |= ACTUALLY_THROTTLED; 1082 spin_unlock(&info->lock); 1083 return; 1084 } 1085 spin_unlock(&info->lock); 1086 1087 schedule_work(&info->rx_work); 1088} 1089 1090 1091static void whiteheat_write_callback(struct urb *urb) 1092{ 1093 struct usb_serial_port *port = urb->context; 1094 struct whiteheat_private *info = usb_get_serial_port_data(port); 1095 struct whiteheat_urb_wrap *wrap; 1096 int status = urb->status; 1097 1098 dbg("%s - port %d", __func__, port->number); 1099 1100 spin_lock(&info->lock); 1101 wrap = urb_to_wrap(urb, &info->tx_urbs_submitted); 1102 if (!wrap) { 1103 spin_unlock(&info->lock); 1104 dev_err(&port->dev, "%s - Not my urb!\n", __func__); 1105 return; 1106 } 1107 list_move(&wrap->list, &info->tx_urbs_free); 1108 spin_unlock(&info->lock); 1109 1110 if (status) { 1111 dbg("%s - nonzero write bulk status received: %d", 1112 __func__, status); 1113 return; 1114 } 1115 1116 usb_serial_port_softint(port); 1117} 1118 1119 1120/***************************************************************************** 1121 * Connect Tech's White Heat firmware interface 1122 *****************************************************************************/ 1123static int firm_send_command(struct usb_serial_port *port, __u8 command, 1124 __u8 *data, __u8 datasize) 1125{ 1126 struct usb_serial_port *command_port; 1127 struct whiteheat_command_private *command_info; 1128 struct whiteheat_private *info; 1129 __u8 *transfer_buffer; 1130 int retval = 0; 1131 int t; 1132 1133 dbg("%s - command %d", __func__, command); 1134 1135 command_port = port->serial->port[COMMAND_PORT]; 1136 command_info = usb_get_serial_port_data(command_port); 1137 mutex_lock(&command_info->mutex); 1138 command_info->command_finished = false; 1139 1140 transfer_buffer = (__u8 *)command_port->write_urb->transfer_buffer; 1141 transfer_buffer[0] = command; 1142 memcpy(&transfer_buffer[1], data, datasize); 1143 command_port->write_urb->transfer_buffer_length = datasize + 1; 1144 command_port->write_urb->dev = port->serial->dev; 1145 retval = usb_submit_urb(command_port->write_urb, GFP_NOIO); 1146 if (retval) { 1147 dbg("%s - submit urb failed", __func__); 1148 goto exit; 1149 } 1150 1151 /* wait for the command to complete */ 1152 t = wait_event_timeout(command_info->wait_command, 1153 (bool)command_info->command_finished, COMMAND_TIMEOUT); 1154 if (!t) 1155 usb_kill_urb(command_port->write_urb); 1156 1157 if (command_info->command_finished == false) { 1158 dbg("%s - command timed out.", __func__); 1159 retval = -ETIMEDOUT; 1160 goto exit; 1161 } 1162 1163 if (command_info->command_finished == WHITEHEAT_CMD_FAILURE) { 1164 dbg("%s - command failed.", __func__); 1165 retval = -EIO; 1166 goto exit; 1167 } 1168 1169 if (command_info->command_finished == WHITEHEAT_CMD_COMPLETE) { 1170 dbg("%s - command completed.", __func__); 1171 switch (command) { 1172 case WHITEHEAT_GET_DTR_RTS: 1173 info = usb_get_serial_port_data(port); 1174 memcpy(&info->mcr, command_info->result_buffer, 1175 sizeof(struct whiteheat_dr_info)); 1176 break; 1177 } 1178 } 1179exit: 1180 mutex_unlock(&command_info->mutex); 1181 return retval; 1182} 1183 1184 1185static int firm_open(struct usb_serial_port *port) 1186{ 1187 struct whiteheat_simple open_command; 1188 1189 open_command.port = port->number - port->serial->minor + 1; 1190 return firm_send_command(port, WHITEHEAT_OPEN, 1191 (__u8 *)&open_command, sizeof(open_command)); 1192} 1193 1194 1195static int firm_close(struct usb_serial_port *port) 1196{ 1197 struct whiteheat_simple close_command; 1198 1199 close_command.port = port->number - port->serial->minor + 1; 1200 return firm_send_command(port, WHITEHEAT_CLOSE, 1201 (__u8 *)&close_command, sizeof(close_command)); 1202} 1203 1204 1205static void firm_setup_port(struct tty_struct *tty) 1206{ 1207 struct usb_serial_port *port = tty->driver_data; 1208 struct whiteheat_port_settings port_settings; 1209 unsigned int cflag = tty->termios->c_cflag; 1210 1211 port_settings.port = port->number + 1; 1212 1213 /* get the byte size */ 1214 switch (cflag & CSIZE) { 1215 case CS5: port_settings.bits = 5; break; 1216 case CS6: port_settings.bits = 6; break; 1217 case CS7: port_settings.bits = 7; break; 1218 default: 1219 case CS8: port_settings.bits = 8; break; 1220 } 1221 dbg("%s - data bits = %d", __func__, port_settings.bits); 1222 1223 /* determine the parity */ 1224 if (cflag & PARENB) 1225 if (cflag & CMSPAR) 1226 if (cflag & PARODD) 1227 port_settings.parity = WHITEHEAT_PAR_MARK; 1228 else 1229 port_settings.parity = WHITEHEAT_PAR_SPACE; 1230 else 1231 if (cflag & PARODD) 1232 port_settings.parity = WHITEHEAT_PAR_ODD; 1233 else 1234 port_settings.parity = WHITEHEAT_PAR_EVEN; 1235 else 1236 port_settings.parity = WHITEHEAT_PAR_NONE; 1237 dbg("%s - parity = %c", __func__, port_settings.parity); 1238 1239 /* figure out the stop bits requested */ 1240 if (cflag & CSTOPB) 1241 port_settings.stop = 2; 1242 else 1243 port_settings.stop = 1; 1244 dbg("%s - stop bits = %d", __func__, port_settings.stop); 1245 1246 /* figure out the flow control settings */ 1247 if (cflag & CRTSCTS) 1248 port_settings.hflow = (WHITEHEAT_HFLOW_CTS | 1249 WHITEHEAT_HFLOW_RTS); 1250 else 1251 port_settings.hflow = WHITEHEAT_HFLOW_NONE; 1252 dbg("%s - hardware flow control = %s %s %s %s", __func__, 1253 (port_settings.hflow & WHITEHEAT_HFLOW_CTS) ? "CTS" : "", 1254 (port_settings.hflow & WHITEHEAT_HFLOW_RTS) ? "RTS" : "", 1255 (port_settings.hflow & WHITEHEAT_HFLOW_DSR) ? "DSR" : "", 1256 (port_settings.hflow & WHITEHEAT_HFLOW_DTR) ? "DTR" : ""); 1257 1258 /* determine software flow control */ 1259 if (I_IXOFF(tty)) 1260 port_settings.sflow = WHITEHEAT_SFLOW_RXTX; 1261 else 1262 port_settings.sflow = WHITEHEAT_SFLOW_NONE; 1263 dbg("%s - software flow control = %c", __func__, port_settings.sflow); 1264 1265 port_settings.xon = START_CHAR(tty); 1266 port_settings.xoff = STOP_CHAR(tty); 1267 dbg("%s - XON = %2x, XOFF = %2x", 1268 __func__, port_settings.xon, port_settings.xoff); 1269 1270 /* get the baud rate wanted */ 1271 port_settings.baud = tty_get_baud_rate(tty); 1272 dbg("%s - baud rate = %d", __func__, port_settings.baud); 1273 1274 /* fixme: should set validated settings */ 1275 tty_encode_baud_rate(tty, port_settings.baud, port_settings.baud); 1276 /* handle any settings that aren't specified in the tty structure */ 1277 port_settings.lloop = 0; 1278 1279 /* now send the message to the device */ 1280 firm_send_command(port, WHITEHEAT_SETUP_PORT, 1281 (__u8 *)&port_settings, sizeof(port_settings)); 1282} 1283 1284 1285static int firm_set_rts(struct usb_serial_port *port, __u8 onoff) 1286{ 1287 struct whiteheat_set_rdb rts_command; 1288 1289 rts_command.port = port->number - port->serial->minor + 1; 1290 rts_command.state = onoff; 1291 return firm_send_command(port, WHITEHEAT_SET_RTS, 1292 (__u8 *)&rts_command, sizeof(rts_command)); 1293} 1294 1295 1296static int firm_set_dtr(struct usb_serial_port *port, __u8 onoff) 1297{ 1298 struct whiteheat_set_rdb dtr_command; 1299 1300 dtr_command.port = port->number - port->serial->minor + 1; 1301 dtr_command.state = onoff; 1302 return firm_send_command(port, WHITEHEAT_SET_DTR, 1303 (__u8 *)&dtr_command, sizeof(dtr_command)); 1304} 1305 1306 1307static int firm_set_break(struct usb_serial_port *port, __u8 onoff) 1308{ 1309 struct whiteheat_set_rdb break_command; 1310 1311 break_command.port = port->number - port->serial->minor + 1; 1312 break_command.state = onoff; 1313 return firm_send_command(port, WHITEHEAT_SET_BREAK, 1314 (__u8 *)&break_command, sizeof(break_command)); 1315} 1316 1317 1318static int firm_purge(struct usb_serial_port *port, __u8 rxtx) 1319{ 1320 struct whiteheat_purge purge_command; 1321 1322 purge_command.port = port->number - port->serial->minor + 1; 1323 purge_command.what = rxtx; 1324 return firm_send_command(port, WHITEHEAT_PURGE, 1325 (__u8 *)&purge_command, sizeof(purge_command)); 1326} 1327 1328 1329static int firm_get_dtr_rts(struct usb_serial_port *port) 1330{ 1331 struct whiteheat_simple get_dr_command; 1332 1333 get_dr_command.port = port->number - port->serial->minor + 1; 1334 return firm_send_command(port, WHITEHEAT_GET_DTR_RTS, 1335 (__u8 *)&get_dr_command, sizeof(get_dr_command)); 1336} 1337 1338 1339static int firm_report_tx_done(struct usb_serial_port *port) 1340{ 1341 struct whiteheat_simple close_command; 1342 1343 close_command.port = port->number - port->serial->minor + 1; 1344 return firm_send_command(port, WHITEHEAT_REPORT_TX_DONE, 1345 (__u8 *)&close_command, sizeof(close_command)); 1346} 1347 1348 1349/***************************************************************************** 1350 * Connect Tech's White Heat utility functions 1351 *****************************************************************************/ 1352static int start_command_port(struct usb_serial *serial) 1353{ 1354 struct usb_serial_port *command_port; 1355 struct whiteheat_command_private *command_info; 1356 int retval = 0; 1357 1358 command_port = serial->port[COMMAND_PORT]; 1359 command_info = usb_get_serial_port_data(command_port); 1360 mutex_lock(&command_info->mutex); 1361 if (!command_info->port_running) { 1362 /* Work around HCD bugs */ 1363 usb_clear_halt(serial->dev, command_port->read_urb->pipe); 1364 1365 command_port->read_urb->dev = serial->dev; 1366 retval = usb_submit_urb(command_port->read_urb, GFP_KERNEL); 1367 if (retval) { 1368 dev_err(&serial->dev->dev, 1369 "%s - failed submitting read urb, error %d\n", 1370 __func__, retval); 1371 goto exit; 1372 } 1373 } 1374 command_info->port_running++; 1375 1376exit: 1377 mutex_unlock(&command_info->mutex); 1378 return retval; 1379} 1380 1381 1382static void stop_command_port(struct usb_serial *serial) 1383{ 1384 struct usb_serial_port *command_port; 1385 struct whiteheat_command_private *command_info; 1386 1387 command_port = serial->port[COMMAND_PORT]; 1388 command_info = usb_get_serial_port_data(command_port); 1389 mutex_lock(&command_info->mutex); 1390 command_info->port_running--; 1391 if (!command_info->port_running) 1392 usb_kill_urb(command_port->read_urb); 1393 mutex_unlock(&command_info->mutex); 1394} 1395 1396 1397static int start_port_read(struct usb_serial_port *port) 1398{ 1399 struct whiteheat_private *info = usb_get_serial_port_data(port); 1400 struct whiteheat_urb_wrap *wrap; 1401 struct urb *urb; 1402 int retval = 0; 1403 unsigned long flags; 1404 struct list_head *tmp; 1405 struct list_head *tmp2; 1406 1407 spin_lock_irqsave(&info->lock, flags); 1408 1409 list_for_each_safe(tmp, tmp2, &info->rx_urbs_free) { 1410 list_del(tmp); 1411 wrap = list_entry(tmp, struct whiteheat_urb_wrap, list); 1412 urb = wrap->urb; 1413 urb->dev = port->serial->dev; 1414 spin_unlock_irqrestore(&info->lock, flags); 1415 retval = usb_submit_urb(urb, GFP_KERNEL); 1416 if (retval) { 1417 spin_lock_irqsave(&info->lock, flags); 1418 list_add(tmp, &info->rx_urbs_free); 1419 list_for_each_safe(tmp, tmp2, &info->rx_urbs_submitted) { 1420 wrap = list_entry(tmp, struct whiteheat_urb_wrap, list); 1421 urb = wrap->urb; 1422 list_del(tmp); 1423 spin_unlock_irqrestore(&info->lock, flags); 1424 usb_kill_urb(urb); 1425 spin_lock_irqsave(&info->lock, flags); 1426 list_add(tmp, &info->rx_urbs_free); 1427 } 1428 break; 1429 } 1430 spin_lock_irqsave(&info->lock, flags); 1431 list_add(tmp, &info->rx_urbs_submitted); 1432 } 1433 1434 spin_unlock_irqrestore(&info->lock, flags); 1435 1436 return retval; 1437} 1438 1439 1440static struct whiteheat_urb_wrap *urb_to_wrap(struct urb *urb, 1441 struct list_head *head) 1442{ 1443 struct whiteheat_urb_wrap *wrap; 1444 struct list_head *tmp; 1445 1446 list_for_each(tmp, head) { 1447 wrap = list_entry(tmp, struct whiteheat_urb_wrap, list); 1448 if (wrap->urb == urb) 1449 return wrap; 1450 } 1451 1452 return NULL; 1453} 1454 1455 1456static struct list_head *list_first(struct list_head *head) 1457{ 1458 return head->next; 1459} 1460 1461 1462static void rx_data_softint(struct work_struct *work) 1463{ 1464 struct whiteheat_private *info = 1465 container_of(work, struct whiteheat_private, rx_work); 1466 struct usb_serial_port *port = info->port; 1467 struct tty_struct *tty = tty_port_tty_get(&port->port); 1468 struct whiteheat_urb_wrap *wrap; 1469 struct urb *urb; 1470 unsigned long flags; 1471 struct list_head *tmp; 1472 struct list_head *tmp2; 1473 int result; 1474 int sent = 0; 1475 1476 spin_lock_irqsave(&info->lock, flags); 1477 if (info->flags & THROTTLED) { 1478 spin_unlock_irqrestore(&info->lock, flags); 1479 goto out; 1480 } 1481 1482 list_for_each_safe(tmp, tmp2, &info->rx_urb_q) { 1483 list_del(tmp); 1484 spin_unlock_irqrestore(&info->lock, flags); 1485 1486 wrap = list_entry(tmp, struct whiteheat_urb_wrap, list); 1487 urb = wrap->urb; 1488 1489 if (tty && urb->actual_length) 1490 sent += tty_insert_flip_string(tty, 1491 urb->transfer_buffer, urb->actual_length); 1492 1493 urb->dev = port->serial->dev; 1494 result = usb_submit_urb(urb, GFP_ATOMIC); 1495 if (result) { 1496 dev_err(&port->dev, 1497 "%s - failed resubmitting read urb, error %d\n", 1498 __func__, result); 1499 spin_lock_irqsave(&info->lock, flags); 1500 list_add(tmp, &info->rx_urbs_free); 1501 continue; 1502 } 1503 1504 spin_lock_irqsave(&info->lock, flags); 1505 list_add(tmp, &info->rx_urbs_submitted); 1506 } 1507 spin_unlock_irqrestore(&info->lock, flags); 1508 1509 if (sent) 1510 tty_flip_buffer_push(tty); 1511out: 1512 tty_kref_put(tty); 1513} 1514 1515 1516/***************************************************************************** 1517 * Connect Tech's White Heat module functions 1518 *****************************************************************************/ 1519static int __init whiteheat_init(void) 1520{ 1521 int retval; 1522 retval = usb_serial_register(&whiteheat_fake_device); 1523 if (retval) 1524 goto failed_fake_register; 1525 retval = usb_serial_register(&whiteheat_device); 1526 if (retval) 1527 goto failed_device_register; 1528 retval = usb_register(&whiteheat_driver); 1529 if (retval) 1530 goto failed_usb_register; 1531 printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_VERSION ":" 1532 DRIVER_DESC "\n"); 1533 return 0; 1534failed_usb_register: 1535 usb_serial_deregister(&whiteheat_device); 1536failed_device_register: 1537 usb_serial_deregister(&whiteheat_fake_device); 1538failed_fake_register: 1539 return retval; 1540} 1541 1542 1543static void __exit whiteheat_exit(void) 1544{ 1545 usb_deregister(&whiteheat_driver); 1546 usb_serial_deregister(&whiteheat_fake_device); 1547 usb_serial_deregister(&whiteheat_device); 1548} 1549 1550 1551module_init(whiteheat_init); 1552module_exit(whiteheat_exit); 1553 1554MODULE_AUTHOR(DRIVER_AUTHOR); 1555MODULE_DESCRIPTION(DRIVER_DESC); 1556MODULE_LICENSE("GPL"); 1557 1558MODULE_FIRMWARE("whiteheat.fw"); 1559MODULE_FIRMWARE("whiteheat_loader.fw"); 1560 1561module_param(urb_pool_size, int, 0); 1562MODULE_PARM_DESC(urb_pool_size, "Number of urbs to use for buffering"); 1563 1564module_param(debug, bool, S_IRUGO | S_IWUSR); 1565MODULE_PARM_DESC(debug, "Debug enabled or not"); 1566