mesh.c revision 2c53040f018b6c36a46eec75b9b937aaa5f78e6d
1/*
2 * Copyright (c) 2008, 2009 open80211s Ltd.
3 * Authors:    Luis Carlos Cobo <luisca@cozybit.com>
4 * 	       Javier Cardona <javier@cozybit.com>
5 *
6 * This program is free software; you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License version 2 as
8 * published by the Free Software Foundation.
9 */
10
11#include <linux/slab.h>
12#include <asm/unaligned.h>
13#include "ieee80211_i.h"
14#include "mesh.h"
15
16#define TMR_RUNNING_HK	0
17#define TMR_RUNNING_MP	1
18#define TMR_RUNNING_MPR	2
19
20int mesh_allocated;
21static struct kmem_cache *rm_cache;
22
23#ifdef CONFIG_MAC80211_MESH
24bool mesh_action_is_path_sel(struct ieee80211_mgmt *mgmt)
25{
26	return (mgmt->u.action.u.mesh_action.action_code ==
27			WLAN_MESH_ACTION_HWMP_PATH_SELECTION);
28}
29#else
30bool mesh_action_is_path_sel(struct ieee80211_mgmt *mgmt)
31{ return false; }
32#endif
33
34void ieee80211s_init(void)
35{
36	mesh_pathtbl_init();
37	mesh_allocated = 1;
38	rm_cache = kmem_cache_create("mesh_rmc", sizeof(struct rmc_entry),
39				     0, 0, NULL);
40}
41
42void ieee80211s_stop(void)
43{
44	mesh_pathtbl_unregister();
45	kmem_cache_destroy(rm_cache);
46}
47
48static void ieee80211_mesh_housekeeping_timer(unsigned long data)
49{
50	struct ieee80211_sub_if_data *sdata = (void *) data;
51	struct ieee80211_local *local = sdata->local;
52	struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh;
53
54	set_bit(MESH_WORK_HOUSEKEEPING, &ifmsh->wrkq_flags);
55
56	if (local->quiescing) {
57		set_bit(TMR_RUNNING_HK, &ifmsh->timers_running);
58		return;
59	}
60
61	ieee80211_queue_work(&local->hw, &sdata->work);
62}
63
64/**
65 * mesh_matches_local - check if the config of a mesh point matches ours
66 *
67 * @sdata: local mesh subif
68 * @ie: information elements of a management frame from the mesh peer
69 *
70 * This function checks if the mesh configuration of a mesh point matches the
71 * local mesh configuration, i.e. if both nodes belong to the same mesh network.
72 */
73bool mesh_matches_local(struct ieee80211_sub_if_data *sdata,
74			struct ieee802_11_elems *ie)
75{
76	struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh;
77	struct ieee80211_local *local = sdata->local;
78	u32 basic_rates = 0;
79	enum nl80211_channel_type sta_channel_type = NL80211_CHAN_NO_HT;
80
81	/*
82	 * As support for each feature is added, check for matching
83	 * - On mesh config capabilities
84	 *   - Power Save Support En
85	 *   - Sync support enabled
86	 *   - Sync support active
87	 *   - Sync support required from peer
88	 *   - MDA enabled
89	 * - Power management control on fc
90	 */
91	if (!(ifmsh->mesh_id_len == ie->mesh_id_len &&
92	     memcmp(ifmsh->mesh_id, ie->mesh_id, ie->mesh_id_len) == 0 &&
93	     (ifmsh->mesh_pp_id == ie->mesh_config->meshconf_psel) &&
94	     (ifmsh->mesh_pm_id == ie->mesh_config->meshconf_pmetric) &&
95	     (ifmsh->mesh_cc_id == ie->mesh_config->meshconf_congest) &&
96	     (ifmsh->mesh_sp_id == ie->mesh_config->meshconf_synch) &&
97	     (ifmsh->mesh_auth_id == ie->mesh_config->meshconf_auth)))
98		goto mismatch;
99
100	ieee80211_sta_get_rates(local, ie, local->oper_channel->band,
101				&basic_rates);
102
103	if (sdata->vif.bss_conf.basic_rates != basic_rates)
104		goto mismatch;
105
106	if (ie->ht_operation)
107		sta_channel_type =
108			ieee80211_ht_oper_to_channel_type(ie->ht_operation);
109
110	/* Disallow HT40+/- mismatch */
111	if (ie->ht_operation &&
112	    (local->_oper_channel_type == NL80211_CHAN_HT40MINUS ||
113	    local->_oper_channel_type == NL80211_CHAN_HT40PLUS) &&
114	    (sta_channel_type == NL80211_CHAN_HT40MINUS ||
115	     sta_channel_type == NL80211_CHAN_HT40PLUS) &&
116	    local->_oper_channel_type != sta_channel_type)
117		goto mismatch;
118
119	return true;
120mismatch:
121	return false;
122}
123
124/**
125 * mesh_peer_accepts_plinks - check if an mp is willing to establish peer links
126 *
127 * @ie: information elements of a management frame from the mesh peer
128 */
129bool mesh_peer_accepts_plinks(struct ieee802_11_elems *ie)
130{
131	return (ie->mesh_config->meshconf_cap &
132	    MESHCONF_CAPAB_ACCEPT_PLINKS) != 0;
133}
134
135/**
136 * mesh_accept_plinks_update - update accepting_plink in local mesh beacons
137 *
138 * @sdata: mesh interface in which mesh beacons are going to be updated
139 */
140void mesh_accept_plinks_update(struct ieee80211_sub_if_data *sdata)
141{
142	bool free_plinks;
143
144	/* In case mesh_plink_free_count > 0 and mesh_plinktbl_capacity == 0,
145	 * the mesh interface might be able to establish plinks with peers that
146	 * are already on the table but are not on PLINK_ESTAB state. However,
147	 * in general the mesh interface is not accepting peer link requests
148	 * from new peers, and that must be reflected in the beacon
149	 */
150	free_plinks = mesh_plink_availables(sdata);
151
152	if (free_plinks != sdata->u.mesh.accepting_plinks)
153		ieee80211_mesh_housekeeping_timer((unsigned long) sdata);
154}
155
156int mesh_rmc_init(struct ieee80211_sub_if_data *sdata)
157{
158	int i;
159
160	sdata->u.mesh.rmc = kmalloc(sizeof(struct mesh_rmc), GFP_KERNEL);
161	if (!sdata->u.mesh.rmc)
162		return -ENOMEM;
163	sdata->u.mesh.rmc->idx_mask = RMC_BUCKETS - 1;
164	for (i = 0; i < RMC_BUCKETS; i++)
165		INIT_LIST_HEAD(&sdata->u.mesh.rmc->bucket[i].list);
166	return 0;
167}
168
169void mesh_rmc_free(struct ieee80211_sub_if_data *sdata)
170{
171	struct mesh_rmc *rmc = sdata->u.mesh.rmc;
172	struct rmc_entry *p, *n;
173	int i;
174
175	if (!sdata->u.mesh.rmc)
176		return;
177
178	for (i = 0; i < RMC_BUCKETS; i++)
179		list_for_each_entry_safe(p, n, &rmc->bucket[i].list, list) {
180			list_del(&p->list);
181			kmem_cache_free(rm_cache, p);
182		}
183
184	kfree(rmc);
185	sdata->u.mesh.rmc = NULL;
186}
187
188/**
189 * mesh_rmc_check - Check frame in recent multicast cache and add if absent.
190 *
191 * @sa:		source address
192 * @mesh_hdr:	mesh_header
193 *
194 * Returns: 0 if the frame is not in the cache, nonzero otherwise.
195 *
196 * Checks using the source address and the mesh sequence number if we have
197 * received this frame lately. If the frame is not in the cache, it is added to
198 * it.
199 */
200int mesh_rmc_check(u8 *sa, struct ieee80211s_hdr *mesh_hdr,
201		   struct ieee80211_sub_if_data *sdata)
202{
203	struct mesh_rmc *rmc = sdata->u.mesh.rmc;
204	u32 seqnum = 0;
205	int entries = 0;
206	u8 idx;
207	struct rmc_entry *p, *n;
208
209	/* Don't care about endianness since only match matters */
210	memcpy(&seqnum, &mesh_hdr->seqnum, sizeof(mesh_hdr->seqnum));
211	idx = le32_to_cpu(mesh_hdr->seqnum) & rmc->idx_mask;
212	list_for_each_entry_safe(p, n, &rmc->bucket[idx].list, list) {
213		++entries;
214		if (time_after(jiffies, p->exp_time) ||
215				(entries == RMC_QUEUE_MAX_LEN)) {
216			list_del(&p->list);
217			kmem_cache_free(rm_cache, p);
218			--entries;
219		} else if ((seqnum == p->seqnum) &&
220			   (ether_addr_equal(sa, p->sa)))
221			return -1;
222	}
223
224	p = kmem_cache_alloc(rm_cache, GFP_ATOMIC);
225	if (!p)
226		return 0;
227
228	p->seqnum = seqnum;
229	p->exp_time = jiffies + RMC_TIMEOUT;
230	memcpy(p->sa, sa, ETH_ALEN);
231	list_add(&p->list, &rmc->bucket[idx].list);
232	return 0;
233}
234
235int
236mesh_add_meshconf_ie(struct sk_buff *skb, struct ieee80211_sub_if_data *sdata)
237{
238	struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh;
239	u8 *pos, neighbors;
240	u8 meshconf_len = sizeof(struct ieee80211_meshconf_ie);
241
242	if (skb_tailroom(skb) < 2 + meshconf_len)
243		return -ENOMEM;
244
245	pos = skb_put(skb, 2 + meshconf_len);
246	*pos++ = WLAN_EID_MESH_CONFIG;
247	*pos++ = meshconf_len;
248
249	/* Active path selection protocol ID */
250	*pos++ = ifmsh->mesh_pp_id;
251	/* Active path selection metric ID   */
252	*pos++ = ifmsh->mesh_pm_id;
253	/* Congestion control mode identifier */
254	*pos++ = ifmsh->mesh_cc_id;
255	/* Synchronization protocol identifier */
256	*pos++ = ifmsh->mesh_sp_id;
257	/* Authentication Protocol identifier */
258	*pos++ = ifmsh->mesh_auth_id;
259	/* Mesh Formation Info - number of neighbors */
260	neighbors = atomic_read(&ifmsh->mshstats.estab_plinks);
261	/* Number of neighbor mesh STAs or 15 whichever is smaller */
262	neighbors = (neighbors > 15) ? 15 : neighbors;
263	*pos++ = neighbors << 1;
264	/* Mesh capability */
265	ifmsh->accepting_plinks = mesh_plink_availables(sdata);
266	*pos = MESHCONF_CAPAB_FORWARDING;
267	*pos |= ifmsh->accepting_plinks ?
268	    MESHCONF_CAPAB_ACCEPT_PLINKS : 0x00;
269	*pos++ |= ifmsh->adjusting_tbtt ?
270	    MESHCONF_CAPAB_TBTT_ADJUSTING : 0x00;
271	*pos++ = 0x00;
272
273	return 0;
274}
275
276int
277mesh_add_meshid_ie(struct sk_buff *skb, struct ieee80211_sub_if_data *sdata)
278{
279	struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh;
280	u8 *pos;
281
282	if (skb_tailroom(skb) < 2 + ifmsh->mesh_id_len)
283		return -ENOMEM;
284
285	pos = skb_put(skb, 2 + ifmsh->mesh_id_len);
286	*pos++ = WLAN_EID_MESH_ID;
287	*pos++ = ifmsh->mesh_id_len;
288	if (ifmsh->mesh_id_len)
289		memcpy(pos, ifmsh->mesh_id, ifmsh->mesh_id_len);
290
291	return 0;
292}
293
294int
295mesh_add_vendor_ies(struct sk_buff *skb, struct ieee80211_sub_if_data *sdata)
296{
297	struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh;
298	u8 offset, len;
299	const u8 *data;
300
301	if (!ifmsh->ie || !ifmsh->ie_len)
302		return 0;
303
304	/* fast-forward to vendor IEs */
305	offset = ieee80211_ie_split_vendor(ifmsh->ie, ifmsh->ie_len, 0);
306
307	if (offset) {
308		len = ifmsh->ie_len - offset;
309		data = ifmsh->ie + offset;
310		if (skb_tailroom(skb) < len)
311			return -ENOMEM;
312		memcpy(skb_put(skb, len), data, len);
313	}
314
315	return 0;
316}
317
318int
319mesh_add_rsn_ie(struct sk_buff *skb, struct ieee80211_sub_if_data *sdata)
320{
321	struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh;
322	u8 len = 0;
323	const u8 *data;
324
325	if (!ifmsh->ie || !ifmsh->ie_len)
326		return 0;
327
328	/* find RSN IE */
329	data = ifmsh->ie;
330	while (data < ifmsh->ie + ifmsh->ie_len) {
331		if (*data == WLAN_EID_RSN) {
332			len = data[1] + 2;
333			break;
334		}
335		data++;
336	}
337
338	if (len) {
339		if (skb_tailroom(skb) < len)
340			return -ENOMEM;
341		memcpy(skb_put(skb, len), data, len);
342	}
343
344	return 0;
345}
346
347int mesh_add_ds_params_ie(struct sk_buff *skb,
348			  struct ieee80211_sub_if_data *sdata)
349{
350	struct ieee80211_local *local = sdata->local;
351	struct ieee80211_supported_band *sband;
352	u8 *pos;
353
354	if (skb_tailroom(skb) < 3)
355		return -ENOMEM;
356
357	sband = local->hw.wiphy->bands[local->hw.conf.channel->band];
358	if (sband->band == IEEE80211_BAND_2GHZ) {
359		pos = skb_put(skb, 2 + 1);
360		*pos++ = WLAN_EID_DS_PARAMS;
361		*pos++ = 1;
362		*pos++ = ieee80211_frequency_to_channel(local->hw.conf.channel->center_freq);
363	}
364
365	return 0;
366}
367
368int mesh_add_ht_cap_ie(struct sk_buff *skb,
369		       struct ieee80211_sub_if_data *sdata)
370{
371	struct ieee80211_local *local = sdata->local;
372	struct ieee80211_supported_band *sband;
373	u8 *pos;
374
375	sband = local->hw.wiphy->bands[local->oper_channel->band];
376	if (!sband->ht_cap.ht_supported ||
377	    local->_oper_channel_type == NL80211_CHAN_NO_HT)
378		return 0;
379
380	if (skb_tailroom(skb) < 2 + sizeof(struct ieee80211_ht_cap))
381		return -ENOMEM;
382
383	pos = skb_put(skb, 2 + sizeof(struct ieee80211_ht_cap));
384	ieee80211_ie_build_ht_cap(pos, &sband->ht_cap, sband->ht_cap.cap);
385
386	return 0;
387}
388
389int mesh_add_ht_oper_ie(struct sk_buff *skb,
390			struct ieee80211_sub_if_data *sdata)
391{
392	struct ieee80211_local *local = sdata->local;
393	struct ieee80211_channel *channel = local->oper_channel;
394	enum nl80211_channel_type channel_type = local->_oper_channel_type;
395	struct ieee80211_supported_band *sband =
396				local->hw.wiphy->bands[channel->band];
397	struct ieee80211_sta_ht_cap *ht_cap = &sband->ht_cap;
398	u8 *pos;
399
400	if (!ht_cap->ht_supported || channel_type == NL80211_CHAN_NO_HT)
401		return 0;
402
403	if (skb_tailroom(skb) < 2 + sizeof(struct ieee80211_ht_operation))
404		return -ENOMEM;
405
406	pos = skb_put(skb, 2 + sizeof(struct ieee80211_ht_operation));
407	ieee80211_ie_build_ht_oper(pos, ht_cap, channel, channel_type,
408				   sdata->vif.bss_conf.ht_operation_mode);
409
410	return 0;
411}
412static void ieee80211_mesh_path_timer(unsigned long data)
413{
414	struct ieee80211_sub_if_data *sdata =
415		(struct ieee80211_sub_if_data *) data;
416	struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh;
417	struct ieee80211_local *local = sdata->local;
418
419	if (local->quiescing) {
420		set_bit(TMR_RUNNING_MP, &ifmsh->timers_running);
421		return;
422	}
423
424	ieee80211_queue_work(&local->hw, &sdata->work);
425}
426
427static void ieee80211_mesh_path_root_timer(unsigned long data)
428{
429	struct ieee80211_sub_if_data *sdata =
430		(struct ieee80211_sub_if_data *) data;
431	struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh;
432	struct ieee80211_local *local = sdata->local;
433
434	set_bit(MESH_WORK_ROOT, &ifmsh->wrkq_flags);
435
436	if (local->quiescing) {
437		set_bit(TMR_RUNNING_MPR, &ifmsh->timers_running);
438		return;
439	}
440
441	ieee80211_queue_work(&local->hw, &sdata->work);
442}
443
444void ieee80211_mesh_root_setup(struct ieee80211_if_mesh *ifmsh)
445{
446	if (ifmsh->mshcfg.dot11MeshHWMPRootMode > IEEE80211_ROOTMODE_ROOT)
447		set_bit(MESH_WORK_ROOT, &ifmsh->wrkq_flags);
448	else {
449		clear_bit(MESH_WORK_ROOT, &ifmsh->wrkq_flags);
450		/* stop running timer */
451		del_timer_sync(&ifmsh->mesh_path_root_timer);
452	}
453}
454
455/**
456 * ieee80211_fill_mesh_addresses - fill addresses of a locally originated mesh frame
457 * @hdr:    	802.11 frame header
458 * @fc:		frame control field
459 * @meshda:	destination address in the mesh
460 * @meshsa:	source address address in the mesh.  Same as TA, as frame is
461 *              locally originated.
462 *
463 * Return the length of the 802.11 (does not include a mesh control header)
464 */
465int ieee80211_fill_mesh_addresses(struct ieee80211_hdr *hdr, __le16 *fc,
466				  const u8 *meshda, const u8 *meshsa)
467{
468	if (is_multicast_ether_addr(meshda)) {
469		*fc |= cpu_to_le16(IEEE80211_FCTL_FROMDS);
470		/* DA TA SA */
471		memcpy(hdr->addr1, meshda, ETH_ALEN);
472		memcpy(hdr->addr2, meshsa, ETH_ALEN);
473		memcpy(hdr->addr3, meshsa, ETH_ALEN);
474		return 24;
475	} else {
476		*fc |= cpu_to_le16(IEEE80211_FCTL_FROMDS | IEEE80211_FCTL_TODS);
477		/* RA TA DA SA */
478		memset(hdr->addr1, 0, ETH_ALEN);   /* RA is resolved later */
479		memcpy(hdr->addr2, meshsa, ETH_ALEN);
480		memcpy(hdr->addr3, meshda, ETH_ALEN);
481		memcpy(hdr->addr4, meshsa, ETH_ALEN);
482		return 30;
483	}
484}
485
486/**
487 * ieee80211_new_mesh_header - create a new mesh header
488 * @meshhdr:    uninitialized mesh header
489 * @sdata:	mesh interface to be used
490 * @addr4or5:   1st address in the ae header, which may correspond to address 4
491 *              (if addr6 is NULL) or address 5 (if addr6 is present). It may
492 *              be NULL.
493 * @addr6:	2nd address in the ae header, which corresponds to addr6 of the
494 *              mesh frame
495 *
496 * Return the header length.
497 */
498int ieee80211_new_mesh_header(struct ieee80211s_hdr *meshhdr,
499		struct ieee80211_sub_if_data *sdata, char *addr4or5,
500		char *addr6)
501{
502	int aelen = 0;
503	BUG_ON(!addr4or5 && addr6);
504	memset(meshhdr, 0, sizeof(*meshhdr));
505	meshhdr->ttl = sdata->u.mesh.mshcfg.dot11MeshTTL;
506	put_unaligned(cpu_to_le32(sdata->u.mesh.mesh_seqnum), &meshhdr->seqnum);
507	sdata->u.mesh.mesh_seqnum++;
508	if (addr4or5 && !addr6) {
509		meshhdr->flags |= MESH_FLAGS_AE_A4;
510		aelen += ETH_ALEN;
511		memcpy(meshhdr->eaddr1, addr4or5, ETH_ALEN);
512	} else if (addr4or5 && addr6) {
513		meshhdr->flags |= MESH_FLAGS_AE_A5_A6;
514		aelen += 2 * ETH_ALEN;
515		memcpy(meshhdr->eaddr1, addr4or5, ETH_ALEN);
516		memcpy(meshhdr->eaddr2, addr6, ETH_ALEN);
517	}
518	return 6 + aelen;
519}
520
521static void ieee80211_mesh_housekeeping(struct ieee80211_sub_if_data *sdata,
522			   struct ieee80211_if_mesh *ifmsh)
523{
524	bool free_plinks;
525
526	ieee80211_sta_expire(sdata, IEEE80211_MESH_PEER_INACTIVITY_LIMIT);
527	mesh_path_expire(sdata);
528
529	free_plinks = mesh_plink_availables(sdata);
530	if (free_plinks != sdata->u.mesh.accepting_plinks)
531		ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_BEACON);
532
533	mod_timer(&ifmsh->housekeeping_timer,
534		  round_jiffies(jiffies + IEEE80211_MESH_HOUSEKEEPING_INTERVAL));
535}
536
537static void ieee80211_mesh_rootpath(struct ieee80211_sub_if_data *sdata)
538{
539	struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh;
540	u32 interval;
541
542	mesh_path_tx_root_frame(sdata);
543
544	if (ifmsh->mshcfg.dot11MeshHWMPRootMode == IEEE80211_PROACTIVE_RANN)
545		interval = ifmsh->mshcfg.dot11MeshHWMPRannInterval;
546	else
547		interval = ifmsh->mshcfg.dot11MeshHWMProotInterval;
548
549	mod_timer(&ifmsh->mesh_path_root_timer,
550		  round_jiffies(TU_TO_EXP_TIME(interval)));
551}
552
553#ifdef CONFIG_PM
554void ieee80211_mesh_quiesce(struct ieee80211_sub_if_data *sdata)
555{
556	struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh;
557
558	/* use atomic bitops in case all timers fire at the same time */
559
560	if (del_timer_sync(&ifmsh->housekeeping_timer))
561		set_bit(TMR_RUNNING_HK, &ifmsh->timers_running);
562	if (del_timer_sync(&ifmsh->mesh_path_timer))
563		set_bit(TMR_RUNNING_MP, &ifmsh->timers_running);
564	if (del_timer_sync(&ifmsh->mesh_path_root_timer))
565		set_bit(TMR_RUNNING_MPR, &ifmsh->timers_running);
566}
567
568void ieee80211_mesh_restart(struct ieee80211_sub_if_data *sdata)
569{
570	struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh;
571
572	if (test_and_clear_bit(TMR_RUNNING_HK, &ifmsh->timers_running))
573		add_timer(&ifmsh->housekeeping_timer);
574	if (test_and_clear_bit(TMR_RUNNING_MP, &ifmsh->timers_running))
575		add_timer(&ifmsh->mesh_path_timer);
576	if (test_and_clear_bit(TMR_RUNNING_MPR, &ifmsh->timers_running))
577		add_timer(&ifmsh->mesh_path_root_timer);
578	ieee80211_mesh_root_setup(ifmsh);
579}
580#endif
581
582void ieee80211_start_mesh(struct ieee80211_sub_if_data *sdata)
583{
584	struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh;
585	struct ieee80211_local *local = sdata->local;
586
587	local->fif_other_bss++;
588	/* mesh ifaces must set allmulti to forward mcast traffic */
589	atomic_inc(&local->iff_allmultis);
590	ieee80211_configure_filter(local);
591
592	ifmsh->mesh_cc_id = 0;	/* Disabled */
593	ifmsh->mesh_auth_id = 0;	/* Disabled */
594	/* register sync ops from extensible synchronization framework */
595	ifmsh->sync_ops = ieee80211_mesh_sync_ops_get(ifmsh->mesh_sp_id);
596	ifmsh->adjusting_tbtt = false;
597	ifmsh->sync_offset_clockdrift_max = 0;
598	set_bit(MESH_WORK_HOUSEKEEPING, &ifmsh->wrkq_flags);
599	ieee80211_mesh_root_setup(ifmsh);
600	ieee80211_queue_work(&local->hw, &sdata->work);
601	sdata->vif.bss_conf.ht_operation_mode =
602				ifmsh->mshcfg.ht_opmode;
603	sdata->vif.bss_conf.beacon_int = MESH_DEFAULT_BEACON_INTERVAL;
604	sdata->vif.bss_conf.basic_rates =
605		ieee80211_mandatory_rates(sdata->local,
606					  sdata->local->hw.conf.channel->band);
607	ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_BEACON |
608						BSS_CHANGED_BEACON_ENABLED |
609						BSS_CHANGED_HT |
610						BSS_CHANGED_BASIC_RATES |
611						BSS_CHANGED_BEACON_INT);
612}
613
614void ieee80211_stop_mesh(struct ieee80211_sub_if_data *sdata)
615{
616	struct ieee80211_local *local = sdata->local;
617	struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh;
618
619	ifmsh->mesh_id_len = 0;
620	ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_BEACON_ENABLED);
621	sta_info_flush(local, NULL);
622
623	del_timer_sync(&sdata->u.mesh.housekeeping_timer);
624	del_timer_sync(&sdata->u.mesh.mesh_path_root_timer);
625	/*
626	 * If the timer fired while we waited for it, it will have
627	 * requeued the work. Now the work will be running again
628	 * but will not rearm the timer again because it checks
629	 * whether the interface is running, which, at this point,
630	 * it no longer is.
631	 */
632	cancel_work_sync(&sdata->work);
633
634	local->fif_other_bss--;
635	atomic_dec(&local->iff_allmultis);
636	ieee80211_configure_filter(local);
637}
638
639static void ieee80211_mesh_rx_bcn_presp(struct ieee80211_sub_if_data *sdata,
640					u16 stype,
641					struct ieee80211_mgmt *mgmt,
642					size_t len,
643					struct ieee80211_rx_status *rx_status)
644{
645	struct ieee80211_local *local = sdata->local;
646	struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh;
647	struct ieee802_11_elems elems;
648	struct ieee80211_channel *channel;
649	size_t baselen;
650	int freq;
651	enum ieee80211_band band = rx_status->band;
652
653	/* ignore ProbeResp to foreign address */
654	if (stype == IEEE80211_STYPE_PROBE_RESP &&
655	    !ether_addr_equal(mgmt->da, sdata->vif.addr))
656		return;
657
658	baselen = (u8 *) mgmt->u.probe_resp.variable - (u8 *) mgmt;
659	if (baselen > len)
660		return;
661
662	ieee802_11_parse_elems(mgmt->u.probe_resp.variable, len - baselen,
663			       &elems);
664
665	/* ignore beacons from secure mesh peers if our security is off */
666	if (elems.rsn_len && sdata->u.mesh.security == IEEE80211_MESH_SEC_NONE)
667		return;
668
669	if (elems.ds_params && elems.ds_params_len == 1)
670		freq = ieee80211_channel_to_frequency(elems.ds_params[0], band);
671	else
672		freq = rx_status->freq;
673
674	channel = ieee80211_get_channel(local->hw.wiphy, freq);
675
676	if (!channel || channel->flags & IEEE80211_CHAN_DISABLED)
677		return;
678
679	if (elems.mesh_id && elems.mesh_config &&
680	    mesh_matches_local(sdata, &elems))
681		mesh_neighbour_update(sdata, mgmt->sa, &elems);
682
683	if (ifmsh->sync_ops)
684		ifmsh->sync_ops->rx_bcn_presp(sdata,
685			stype, mgmt, &elems, rx_status);
686}
687
688static void ieee80211_mesh_rx_mgmt_action(struct ieee80211_sub_if_data *sdata,
689					  struct ieee80211_mgmt *mgmt,
690					  size_t len,
691					  struct ieee80211_rx_status *rx_status)
692{
693	switch (mgmt->u.action.category) {
694	case WLAN_CATEGORY_SELF_PROTECTED:
695		switch (mgmt->u.action.u.self_prot.action_code) {
696		case WLAN_SP_MESH_PEERING_OPEN:
697		case WLAN_SP_MESH_PEERING_CLOSE:
698		case WLAN_SP_MESH_PEERING_CONFIRM:
699			mesh_rx_plink_frame(sdata, mgmt, len, rx_status);
700			break;
701		}
702		break;
703	case WLAN_CATEGORY_MESH_ACTION:
704		if (mesh_action_is_path_sel(mgmt))
705			mesh_rx_path_sel_frame(sdata, mgmt, len);
706		break;
707	}
708}
709
710void ieee80211_mesh_rx_queued_mgmt(struct ieee80211_sub_if_data *sdata,
711				   struct sk_buff *skb)
712{
713	struct ieee80211_rx_status *rx_status;
714	struct ieee80211_mgmt *mgmt;
715	u16 stype;
716
717	rx_status = IEEE80211_SKB_RXCB(skb);
718	mgmt = (struct ieee80211_mgmt *) skb->data;
719	stype = le16_to_cpu(mgmt->frame_control) & IEEE80211_FCTL_STYPE;
720
721	switch (stype) {
722	case IEEE80211_STYPE_PROBE_RESP:
723	case IEEE80211_STYPE_BEACON:
724		ieee80211_mesh_rx_bcn_presp(sdata, stype, mgmt, skb->len,
725					    rx_status);
726		break;
727	case IEEE80211_STYPE_ACTION:
728		ieee80211_mesh_rx_mgmt_action(sdata, mgmt, skb->len, rx_status);
729		break;
730	}
731}
732
733void ieee80211_mesh_work(struct ieee80211_sub_if_data *sdata)
734{
735	struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh;
736
737	if (ifmsh->preq_queue_len &&
738	    time_after(jiffies,
739		       ifmsh->last_preq + msecs_to_jiffies(ifmsh->mshcfg.dot11MeshHWMPpreqMinInterval)))
740		mesh_path_start_discovery(sdata);
741
742	if (test_and_clear_bit(MESH_WORK_GROW_MPATH_TABLE, &ifmsh->wrkq_flags))
743		mesh_mpath_table_grow();
744
745	if (test_and_clear_bit(MESH_WORK_GROW_MPP_TABLE, &ifmsh->wrkq_flags))
746		mesh_mpp_table_grow();
747
748	if (test_and_clear_bit(MESH_WORK_HOUSEKEEPING, &ifmsh->wrkq_flags))
749		ieee80211_mesh_housekeeping(sdata, ifmsh);
750
751	if (test_and_clear_bit(MESH_WORK_ROOT, &ifmsh->wrkq_flags))
752		ieee80211_mesh_rootpath(sdata);
753
754	if (test_and_clear_bit(MESH_WORK_DRIFT_ADJUST, &ifmsh->wrkq_flags))
755		mesh_sync_adjust_tbtt(sdata);
756}
757
758void ieee80211_mesh_notify_scan_completed(struct ieee80211_local *local)
759{
760	struct ieee80211_sub_if_data *sdata;
761
762	rcu_read_lock();
763	list_for_each_entry_rcu(sdata, &local->interfaces, list)
764		if (ieee80211_vif_is_mesh(&sdata->vif))
765			ieee80211_queue_work(&local->hw, &sdata->work);
766	rcu_read_unlock();
767}
768
769void ieee80211_mesh_init_sdata(struct ieee80211_sub_if_data *sdata)
770{
771	struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh;
772
773	setup_timer(&ifmsh->housekeeping_timer,
774		    ieee80211_mesh_housekeeping_timer,
775		    (unsigned long) sdata);
776
777	ifmsh->accepting_plinks = true;
778	ifmsh->preq_id = 0;
779	ifmsh->sn = 0;
780	ifmsh->num_gates = 0;
781	atomic_set(&ifmsh->mpaths, 0);
782	mesh_rmc_init(sdata);
783	ifmsh->last_preq = jiffies;
784	ifmsh->next_perr = jiffies;
785	/* Allocate all mesh structures when creating the first mesh interface. */
786	if (!mesh_allocated)
787		ieee80211s_init();
788	setup_timer(&ifmsh->mesh_path_timer,
789		    ieee80211_mesh_path_timer,
790		    (unsigned long) sdata);
791	setup_timer(&ifmsh->mesh_path_root_timer,
792		    ieee80211_mesh_path_root_timer,
793		    (unsigned long) sdata);
794	INIT_LIST_HEAD(&ifmsh->preq_queue.list);
795	spin_lock_init(&ifmsh->mesh_preq_queue_lock);
796	spin_lock_init(&ifmsh->sync_offset_lock);
797}
798