isdn_tty.c revision 606d099cdd1080bbb50ea50dc52d98252f8f10a1
1/* $Id: isdn_tty.c,v 1.1.2.3 2004/02/10 01:07:13 keil Exp $ 2 * 3 * Linux ISDN subsystem, tty functions and AT-command emulator (linklevel). 4 * 5 * Copyright 1994-1999 by Fritz Elfert (fritz@isdn4linux.de) 6 * Copyright 1995,96 by Thinking Objects Software GmbH Wuerzburg 7 * 8 * This software may be used and distributed according to the terms 9 * of the GNU General Public License, incorporated herein by reference. 10 * 11 */ 12#undef ISDN_TTY_STAT_DEBUG 13 14#include <linux/isdn.h> 15#include <linux/delay.h> 16#include "isdn_common.h" 17#include "isdn_tty.h" 18#ifdef CONFIG_ISDN_AUDIO 19#include "isdn_audio.h" 20#define VBUF 0x3e0 21#define VBUFX (VBUF/16) 22#endif 23 24#define FIX_FILE_TRANSFER 25#define DUMMY_HAYES_AT 26 27/* Prototypes */ 28 29static int isdn_tty_edit_at(const char *, int, modem_info *); 30static void isdn_tty_check_esc(const u_char *, u_char, int, int *, u_long *); 31static void isdn_tty_modem_reset_regs(modem_info *, int); 32static void isdn_tty_cmd_ATA(modem_info *); 33static void isdn_tty_flush_buffer(struct tty_struct *); 34static void isdn_tty_modem_result(int, modem_info *); 35#ifdef CONFIG_ISDN_AUDIO 36static int isdn_tty_countDLE(unsigned char *, int); 37#endif 38 39/* Leave this unchanged unless you know what you do! */ 40#define MODEM_PARANOIA_CHECK 41#define MODEM_DO_RESTART 42 43static int bit2si[8] = 44{1, 5, 7, 7, 7, 7, 7, 7}; 45static int si2bit[8] = 46{4, 1, 4, 4, 4, 4, 4, 4}; 47 48char *isdn_tty_revision = "$Revision: 1.1.2.3 $"; 49 50 51/* isdn_tty_try_read() is called from within isdn_tty_rcv_skb() 52 * to stuff incoming data directly into a tty's flip-buffer. This 53 * is done to speed up tty-receiving if the receive-queue is empty. 54 * This routine MUST be called with interrupts off. 55 * Return: 56 * 1 = Success 57 * 0 = Failure, data has to be buffered and later processed by 58 * isdn_tty_readmodem(). 59 */ 60static int 61isdn_tty_try_read(modem_info * info, struct sk_buff *skb) 62{ 63 int c; 64 int len; 65 struct tty_struct *tty; 66 char last; 67 68 if (info->online) { 69 if ((tty = info->tty)) { 70 if (info->mcr & UART_MCR_RTS) { 71 len = skb->len 72#ifdef CONFIG_ISDN_AUDIO 73 + ISDN_AUDIO_SKB_DLECOUNT(skb) 74#endif 75 ; 76 77 c = tty_buffer_request_room(tty, len); 78 if (c >= len) { 79#ifdef CONFIG_ISDN_AUDIO 80 if (ISDN_AUDIO_SKB_DLECOUNT(skb)) { 81 int l = skb->len; 82 unsigned char *dp = skb->data; 83 while (--l) { 84 if (*dp == DLE) 85 tty_insert_flip_char(tty, DLE, 0); 86 tty_insert_flip_char(tty, *dp++, 0); 87 } 88 last = *dp; 89 } else { 90#endif 91 if(len > 1) 92 tty_insert_flip_string(tty, skb->data, len - 1); 93 last = skb->data[len - 1]; 94#ifdef CONFIG_ISDN_AUDIO 95 } 96#endif 97 if (info->emu.mdmreg[REG_CPPP] & BIT_CPPP) 98 tty_insert_flip_char(tty, last, 0xFF); 99 else 100 tty_insert_flip_char(tty, last, TTY_NORMAL); 101 tty_flip_buffer_push(tty); 102 kfree_skb(skb); 103 return 1; 104 } 105 } 106 } 107 } 108 return 0; 109} 110 111/* isdn_tty_readmodem() is called periodically from within timer-interrupt. 112 * It tries getting received data from the receive queue an stuff it into 113 * the tty's flip-buffer. 114 */ 115void 116isdn_tty_readmodem(void) 117{ 118 int resched = 0; 119 int midx; 120 int i; 121 int r; 122 struct tty_struct *tty; 123 modem_info *info; 124 125 for (i = 0; i < ISDN_MAX_CHANNELS; i++) { 126 if ((midx = dev->m_idx[i]) >= 0) { 127 info = &dev->mdm.info[midx]; 128 if (info->online) { 129 r = 0; 130#ifdef CONFIG_ISDN_AUDIO 131 isdn_audio_eval_dtmf(info); 132 if ((info->vonline & 1) && (info->emu.vpar[1])) 133 isdn_audio_eval_silence(info); 134#endif 135 if ((tty = info->tty)) { 136 if (info->mcr & UART_MCR_RTS) { 137 /* CISCO AsyncPPP Hack */ 138 if (!(info->emu.mdmreg[REG_CPPP] & BIT_CPPP)) 139 r = isdn_readbchan_tty(info->isdn_driver, info->isdn_channel, tty, 0); 140 else 141 r = isdn_readbchan_tty(info->isdn_driver, info->isdn_channel, tty, 1); 142 if (r) 143 tty_flip_buffer_push(tty); 144 } else 145 r = 1; 146 } else 147 r = 1; 148 if (r) { 149 info->rcvsched = 0; 150 resched = 1; 151 } else 152 info->rcvsched = 1; 153 } 154 } 155 } 156 if (!resched) 157 isdn_timer_ctrl(ISDN_TIMER_MODEMREAD, 0); 158} 159 160int 161isdn_tty_rcv_skb(int i, int di, int channel, struct sk_buff *skb) 162{ 163 ulong flags; 164 int midx; 165#ifdef CONFIG_ISDN_AUDIO 166 int ifmt; 167#endif 168 modem_info *info; 169 170 if ((midx = dev->m_idx[i]) < 0) { 171 /* if midx is invalid, packet is not for tty */ 172 return 0; 173 } 174 info = &dev->mdm.info[midx]; 175#ifdef CONFIG_ISDN_AUDIO 176 ifmt = 1; 177 178 if ((info->vonline) && (!info->emu.vpar[4])) 179 isdn_audio_calc_dtmf(info, skb->data, skb->len, ifmt); 180 if ((info->vonline & 1) && (info->emu.vpar[1])) 181 isdn_audio_calc_silence(info, skb->data, skb->len, ifmt); 182#endif 183 if ((info->online < 2) 184#ifdef CONFIG_ISDN_AUDIO 185 && (!(info->vonline & 1)) 186#endif 187 ) { 188 /* If Modem not listening, drop data */ 189 kfree_skb(skb); 190 return 1; 191 } 192 if (info->emu.mdmreg[REG_T70] & BIT_T70) { 193 if (info->emu.mdmreg[REG_T70] & BIT_T70_EXT) { 194 /* T.70 decoding: throw away the T.70 header (2 or 4 bytes) */ 195 if (skb->data[0] == 3) /* pure data packet -> 4 byte headers */ 196 skb_pull(skb, 4); 197 else 198 if (skb->data[0] == 1) /* keepalive packet -> 2 byte hdr */ 199 skb_pull(skb, 2); 200 } else 201 /* T.70 decoding: Simply throw away the T.70 header (4 bytes) */ 202 if ((skb->data[0] == 1) && ((skb->data[1] == 0) || (skb->data[1] == 1))) 203 skb_pull(skb, 4); 204 } 205#ifdef CONFIG_ISDN_AUDIO 206 ISDN_AUDIO_SKB_DLECOUNT(skb) = 0; 207 ISDN_AUDIO_SKB_LOCK(skb) = 0; 208 if (info->vonline & 1) { 209 /* voice conversion/compression */ 210 switch (info->emu.vpar[3]) { 211 case 2: 212 case 3: 213 case 4: 214 /* adpcm 215 * Since compressed data takes less 216 * space, we can overwrite the buffer. 217 */ 218 skb_trim(skb, isdn_audio_xlaw2adpcm(info->adpcmr, 219 ifmt, 220 skb->data, 221 skb->data, 222 skb->len)); 223 break; 224 case 5: 225 /* a-law */ 226 if (!ifmt) 227 isdn_audio_ulaw2alaw(skb->data, skb->len); 228 break; 229 case 6: 230 /* u-law */ 231 if (ifmt) 232 isdn_audio_alaw2ulaw(skb->data, skb->len); 233 break; 234 } 235 ISDN_AUDIO_SKB_DLECOUNT(skb) = 236 isdn_tty_countDLE(skb->data, skb->len); 237 } 238#ifdef CONFIG_ISDN_TTY_FAX 239 else { 240 if (info->faxonline & 2) { 241 isdn_tty_fax_bitorder(info, skb); 242 ISDN_AUDIO_SKB_DLECOUNT(skb) = 243 isdn_tty_countDLE(skb->data, skb->len); 244 } 245 } 246#endif 247#endif 248 /* Try to deliver directly via tty-buf if queue is empty */ 249 spin_lock_irqsave(&info->readlock, flags); 250 if (skb_queue_empty(&dev->drv[di]->rpqueue[channel])) 251 if (isdn_tty_try_read(info, skb)) { 252 spin_unlock_irqrestore(&info->readlock, flags); 253 return 1; 254 } 255 /* Direct deliver failed or queue wasn't empty. 256 * Queue up for later dequeueing via timer-irq. 257 */ 258 __skb_queue_tail(&dev->drv[di]->rpqueue[channel], skb); 259 dev->drv[di]->rcvcount[channel] += 260 (skb->len 261#ifdef CONFIG_ISDN_AUDIO 262 + ISDN_AUDIO_SKB_DLECOUNT(skb) 263#endif 264 ); 265 spin_unlock_irqrestore(&info->readlock, flags); 266 /* Schedule dequeuing */ 267 if ((dev->modempoll) && (info->rcvsched)) 268 isdn_timer_ctrl(ISDN_TIMER_MODEMREAD, 1); 269 return 1; 270} 271 272static void 273isdn_tty_cleanup_xmit(modem_info * info) 274{ 275 skb_queue_purge(&info->xmit_queue); 276#ifdef CONFIG_ISDN_AUDIO 277 skb_queue_purge(&info->dtmf_queue); 278#endif 279} 280 281static void 282isdn_tty_tint(modem_info * info) 283{ 284 struct sk_buff *skb = skb_dequeue(&info->xmit_queue); 285 int len, slen; 286 287 if (!skb) 288 return; 289 len = skb->len; 290 if ((slen = isdn_writebuf_skb_stub(info->isdn_driver, 291 info->isdn_channel, 1, skb)) == len) { 292 struct tty_struct *tty = info->tty; 293 info->send_outstanding++; 294 info->msr &= ~UART_MSR_CTS; 295 info->lsr &= ~UART_LSR_TEMT; 296 tty_wakeup(tty); 297 return; 298 } 299 if (slen < 0) { 300 /* Error: no channel, already shutdown, or wrong parameter */ 301 dev_kfree_skb(skb); 302 return; 303 } 304 skb_queue_head(&info->xmit_queue, skb); 305} 306 307#ifdef CONFIG_ISDN_AUDIO 308static int 309isdn_tty_countDLE(unsigned char *buf, int len) 310{ 311 int count = 0; 312 313 while (len--) 314 if (*buf++ == DLE) 315 count++; 316 return count; 317} 318 319/* This routine is called from within isdn_tty_write() to perform 320 * DLE-decoding when sending audio-data. 321 */ 322static int 323isdn_tty_handleDLEdown(modem_info * info, atemu * m, int len) 324{ 325 unsigned char *p = &info->xmit_buf[info->xmit_count]; 326 int count = 0; 327 328 while (len > 0) { 329 if (m->lastDLE) { 330 m->lastDLE = 0; 331 switch (*p) { 332 case DLE: 333 /* Escape code */ 334 if (len > 1) 335 memmove(p, p + 1, len - 1); 336 p--; 337 count++; 338 break; 339 case ETX: 340 /* End of data */ 341 info->vonline |= 4; 342 return count; 343 case DC4: 344 /* Abort RX */ 345 info->vonline &= ~1; 346#ifdef ISDN_DEBUG_MODEM_VOICE 347 printk(KERN_DEBUG 348 "DLEdown: got DLE-DC4, send DLE-ETX on ttyI%d\n", 349 info->line); 350#endif 351 isdn_tty_at_cout("\020\003", info); 352 if (!info->vonline) { 353#ifdef ISDN_DEBUG_MODEM_VOICE 354 printk(KERN_DEBUG 355 "DLEdown: send VCON on ttyI%d\n", 356 info->line); 357#endif 358 isdn_tty_at_cout("\r\nVCON\r\n", info); 359 } 360 /* Fall through */ 361 case 'q': 362 case 's': 363 /* Silence */ 364 if (len > 1) 365 memmove(p, p + 1, len - 1); 366 p--; 367 break; 368 } 369 } else { 370 if (*p == DLE) 371 m->lastDLE = 1; 372 else 373 count++; 374 } 375 p++; 376 len--; 377 } 378 if (len < 0) { 379 printk(KERN_WARNING "isdn_tty: len<0 in DLEdown\n"); 380 return 0; 381 } 382 return count; 383} 384 385/* This routine is called from within isdn_tty_write() when receiving 386 * audio-data. It interrupts receiving, if an character other than 387 * ^S or ^Q is sent. 388 */ 389static int 390isdn_tty_end_vrx(const char *buf, int c) 391{ 392 char ch; 393 394 while (c--) { 395 ch = *buf; 396 if ((ch != 0x11) && (ch != 0x13)) 397 return 1; 398 buf++; 399 } 400 return 0; 401} 402 403static int voice_cf[7] = 404{0, 0, 4, 3, 2, 0, 0}; 405 406#endif /* CONFIG_ISDN_AUDIO */ 407 408/* isdn_tty_senddown() is called either directly from within isdn_tty_write() 409 * or via timer-interrupt from within isdn_tty_modem_xmit(). It pulls 410 * outgoing data from the tty's xmit-buffer, handles voice-decompression or 411 * T.70 if necessary, and finally queues it up for sending via isdn_tty_tint. 412 */ 413static void 414isdn_tty_senddown(modem_info * info) 415{ 416 int buflen; 417 int skb_res; 418#ifdef CONFIG_ISDN_AUDIO 419 int audio_len; 420#endif 421 struct sk_buff *skb; 422 423#ifdef CONFIG_ISDN_AUDIO 424 if (info->vonline & 4) { 425 info->vonline &= ~6; 426 if (!info->vonline) { 427#ifdef ISDN_DEBUG_MODEM_VOICE 428 printk(KERN_DEBUG 429 "senddown: send VCON on ttyI%d\n", 430 info->line); 431#endif 432 isdn_tty_at_cout("\r\nVCON\r\n", info); 433 } 434 } 435#endif 436 if (!(buflen = info->xmit_count)) 437 return; 438 if ((info->emu.mdmreg[REG_CTS] & BIT_CTS) != 0) 439 info->msr &= ~UART_MSR_CTS; 440 info->lsr &= ~UART_LSR_TEMT; 441 /* info->xmit_count is modified here and in isdn_tty_write(). 442 * So we return here if isdn_tty_write() is in the 443 * critical section. 444 */ 445 atomic_inc(&info->xmit_lock); 446 if (!(atomic_dec_and_test(&info->xmit_lock))) 447 return; 448 if (info->isdn_driver < 0) { 449 info->xmit_count = 0; 450 return; 451 } 452 skb_res = dev->drv[info->isdn_driver]->interface->hl_hdrlen + 4; 453#ifdef CONFIG_ISDN_AUDIO 454 if (info->vonline & 2) 455 audio_len = buflen * voice_cf[info->emu.vpar[3]]; 456 else 457 audio_len = 0; 458 skb = dev_alloc_skb(skb_res + buflen + audio_len); 459#else 460 skb = dev_alloc_skb(skb_res + buflen); 461#endif 462 if (!skb) { 463 printk(KERN_WARNING 464 "isdn_tty: Out of memory in ttyI%d senddown\n", 465 info->line); 466 return; 467 } 468 skb_reserve(skb, skb_res); 469 memcpy(skb_put(skb, buflen), info->xmit_buf, buflen); 470 info->xmit_count = 0; 471#ifdef CONFIG_ISDN_AUDIO 472 if (info->vonline & 2) { 473 /* For now, ifmt is fixed to 1 (alaw), since this 474 * is used with ISDN everywhere in the world, except 475 * US, Canada and Japan. 476 * Later, when US-ISDN protocols are implemented, 477 * this setting will depend on the D-channel protocol. 478 */ 479 int ifmt = 1; 480 481 /* voice conversion/decompression */ 482 switch (info->emu.vpar[3]) { 483 case 2: 484 case 3: 485 case 4: 486 /* adpcm, compatible to ZyXel 1496 modem 487 * with ROM revision 6.01 488 */ 489 audio_len = isdn_audio_adpcm2xlaw(info->adpcms, 490 ifmt, 491 skb->data, 492 skb_put(skb, audio_len), 493 buflen); 494 skb_pull(skb, buflen); 495 skb_trim(skb, audio_len); 496 break; 497 case 5: 498 /* a-law */ 499 if (!ifmt) 500 isdn_audio_alaw2ulaw(skb->data, 501 buflen); 502 break; 503 case 6: 504 /* u-law */ 505 if (ifmt) 506 isdn_audio_ulaw2alaw(skb->data, 507 buflen); 508 break; 509 } 510 } 511#endif /* CONFIG_ISDN_AUDIO */ 512 if (info->emu.mdmreg[REG_T70] & BIT_T70) { 513 /* Add T.70 simplified header */ 514 if (info->emu.mdmreg[REG_T70] & BIT_T70_EXT) 515 memcpy(skb_push(skb, 2), "\1\0", 2); 516 else 517 memcpy(skb_push(skb, 4), "\1\0\1\0", 4); 518 } 519 skb_queue_tail(&info->xmit_queue, skb); 520} 521 522/************************************************************ 523 * 524 * Modem-functions 525 * 526 * mostly "stolen" from original Linux-serial.c and friends. 527 * 528 ************************************************************/ 529 530/* The next routine is called once from within timer-interrupt 531 * triggered within isdn_tty_modem_ncarrier(). It calls 532 * isdn_tty_modem_result() to stuff a "NO CARRIER" Message 533 * into the tty's buffer. 534 */ 535static void 536isdn_tty_modem_do_ncarrier(unsigned long data) 537{ 538 modem_info *info = (modem_info *) data; 539 isdn_tty_modem_result(RESULT_NO_CARRIER, info); 540} 541 542/* Next routine is called, whenever the DTR-signal is raised. 543 * It checks the ncarrier-flag, and triggers the above routine 544 * when necessary. The ncarrier-flag is set, whenever DTR goes 545 * low. 546 */ 547static void 548isdn_tty_modem_ncarrier(modem_info * info) 549{ 550 if (info->ncarrier) { 551 info->nc_timer.expires = jiffies + HZ; 552 add_timer(&info->nc_timer); 553 } 554} 555 556/* 557 * return the usage calculated by si and layer 2 protocol 558 */ 559static int 560isdn_calc_usage(int si, int l2) 561{ 562 int usg = ISDN_USAGE_MODEM; 563 564#ifdef CONFIG_ISDN_AUDIO 565 if (si == 1) { 566 switch(l2) { 567 case ISDN_PROTO_L2_MODEM: 568 usg = ISDN_USAGE_MODEM; 569 break; 570#ifdef CONFIG_ISDN_TTY_FAX 571 case ISDN_PROTO_L2_FAX: 572 usg = ISDN_USAGE_FAX; 573 break; 574#endif 575 case ISDN_PROTO_L2_TRANS: 576 default: 577 usg = ISDN_USAGE_VOICE; 578 break; 579 } 580 } 581#endif 582 return(usg); 583} 584 585/* isdn_tty_dial() performs dialing of a tty an the necessary 586 * setup of the lower levels before that. 587 */ 588static void 589isdn_tty_dial(char *n, modem_info * info, atemu * m) 590{ 591 int usg = ISDN_USAGE_MODEM; 592 int si = 7; 593 int l2 = m->mdmreg[REG_L2PROT]; 594 u_long flags; 595 isdn_ctrl cmd; 596 int i; 597 int j; 598 599 for (j = 7; j >= 0; j--) 600 if (m->mdmreg[REG_SI1] & (1 << j)) { 601 si = bit2si[j]; 602 break; 603 } 604 usg = isdn_calc_usage(si, l2); 605#ifdef CONFIG_ISDN_AUDIO 606 if ((si == 1) && 607 (l2 != ISDN_PROTO_L2_MODEM) 608#ifdef CONFIG_ISDN_TTY_FAX 609 && (l2 != ISDN_PROTO_L2_FAX) 610#endif 611 ) { 612 l2 = ISDN_PROTO_L2_TRANS; 613 usg = ISDN_USAGE_VOICE; 614 } 615#endif 616 m->mdmreg[REG_SI1I] = si2bit[si]; 617 spin_lock_irqsave(&dev->lock, flags); 618 i = isdn_get_free_channel(usg, l2, m->mdmreg[REG_L3PROT], -1, -1, m->msn); 619 if (i < 0) { 620 spin_unlock_irqrestore(&dev->lock, flags); 621 isdn_tty_modem_result(RESULT_NO_DIALTONE, info); 622 } else { 623 info->isdn_driver = dev->drvmap[i]; 624 info->isdn_channel = dev->chanmap[i]; 625 info->drv_index = i; 626 dev->m_idx[i] = info->line; 627 dev->usage[i] |= ISDN_USAGE_OUTGOING; 628 info->last_dir = 1; 629 strcpy(info->last_num, n); 630 isdn_info_update(); 631 spin_unlock_irqrestore(&dev->lock, flags); 632 cmd.driver = info->isdn_driver; 633 cmd.arg = info->isdn_channel; 634 cmd.command = ISDN_CMD_CLREAZ; 635 isdn_command(&cmd); 636 strcpy(cmd.parm.num, isdn_map_eaz2msn(m->msn, info->isdn_driver)); 637 cmd.driver = info->isdn_driver; 638 cmd.command = ISDN_CMD_SETEAZ; 639 isdn_command(&cmd); 640 cmd.driver = info->isdn_driver; 641 cmd.command = ISDN_CMD_SETL2; 642 info->last_l2 = l2; 643 cmd.arg = info->isdn_channel + (l2 << 8); 644 isdn_command(&cmd); 645 cmd.driver = info->isdn_driver; 646 cmd.command = ISDN_CMD_SETL3; 647 cmd.arg = info->isdn_channel + (m->mdmreg[REG_L3PROT] << 8); 648#ifdef CONFIG_ISDN_TTY_FAX 649 if (l2 == ISDN_PROTO_L2_FAX) { 650 cmd.parm.fax = info->fax; 651 info->fax->direction = ISDN_TTY_FAX_CONN_OUT; 652 } 653#endif 654 isdn_command(&cmd); 655 cmd.driver = info->isdn_driver; 656 cmd.arg = info->isdn_channel; 657 sprintf(cmd.parm.setup.phone, "%s", n); 658 sprintf(cmd.parm.setup.eazmsn, "%s", 659 isdn_map_eaz2msn(m->msn, info->isdn_driver)); 660 cmd.parm.setup.si1 = si; 661 cmd.parm.setup.si2 = m->mdmreg[REG_SI2]; 662 cmd.command = ISDN_CMD_DIAL; 663 info->dialing = 1; 664 info->emu.carrierwait = 0; 665 strcpy(dev->num[i], n); 666 isdn_info_update(); 667 isdn_command(&cmd); 668 isdn_timer_ctrl(ISDN_TIMER_CARRIER, 1); 669 } 670} 671 672/* isdn_tty_hangup() disassociates a tty from the real 673 * ISDN-line (hangup). The usage-status is cleared 674 * and some cleanup is done also. 675 */ 676void 677isdn_tty_modem_hup(modem_info * info, int local) 678{ 679 isdn_ctrl cmd; 680 int di, ch; 681 682 if (!info) 683 return; 684 685 di = info->isdn_driver; 686 ch = info->isdn_channel; 687 if (di < 0 || ch < 0) 688 return; 689 690 info->isdn_driver = -1; 691 info->isdn_channel = -1; 692 693#ifdef ISDN_DEBUG_MODEM_HUP 694 printk(KERN_DEBUG "Mhup ttyI%d\n", info->line); 695#endif 696 info->rcvsched = 0; 697 isdn_tty_flush_buffer(info->tty); 698 if (info->online) { 699 info->last_lhup = local; 700 info->online = 0; 701 isdn_tty_modem_result(RESULT_NO_CARRIER, info); 702 } 703#ifdef CONFIG_ISDN_AUDIO 704 info->vonline = 0; 705#ifdef CONFIG_ISDN_TTY_FAX 706 info->faxonline = 0; 707 info->fax->phase = ISDN_FAX_PHASE_IDLE; 708#endif 709 info->emu.vpar[4] = 0; 710 info->emu.vpar[5] = 8; 711 kfree(info->dtmf_state); 712 info->dtmf_state = NULL; 713 kfree(info->silence_state); 714 info->silence_state = NULL; 715 kfree(info->adpcms); 716 info->adpcms = NULL; 717 kfree(info->adpcmr); 718 info->adpcmr = NULL; 719#endif 720 if ((info->msr & UART_MSR_RI) && 721 (info->emu.mdmreg[REG_RUNG] & BIT_RUNG)) 722 isdn_tty_modem_result(RESULT_RUNG, info); 723 info->msr &= ~(UART_MSR_DCD | UART_MSR_RI); 724 info->lsr |= UART_LSR_TEMT; 725 726 if (local) { 727 cmd.driver = di; 728 cmd.command = ISDN_CMD_HANGUP; 729 cmd.arg = ch; 730 isdn_command(&cmd); 731 } 732 733 isdn_all_eaz(di, ch); 734 info->emu.mdmreg[REG_RINGCNT] = 0; 735 isdn_free_channel(di, ch, 0); 736 737 if (info->drv_index >= 0) { 738 dev->m_idx[info->drv_index] = -1; 739 info->drv_index = -1; 740 } 741} 742 743/* 744 * Begin of a CAPI like interface, currently used only for 745 * supplementary service (CAPI 2.0 part III) 746 */ 747#include <linux/isdn/capicmd.h> 748 749int 750isdn_tty_capi_facility(capi_msg *cm) { 751 return(-1); /* dummy */ 752} 753 754/* isdn_tty_suspend() tries to suspend the current tty connection 755 */ 756static void 757isdn_tty_suspend(char *id, modem_info * info, atemu * m) 758{ 759 isdn_ctrl cmd; 760 761 int l; 762 763 if (!info) 764 return; 765 766#ifdef ISDN_DEBUG_MODEM_SERVICES 767 printk(KERN_DEBUG "Msusp ttyI%d\n", info->line); 768#endif 769 l = strlen(id); 770 if ((info->isdn_driver >= 0)) { 771 cmd.parm.cmsg.Length = l+18; 772 cmd.parm.cmsg.Command = CAPI_FACILITY; 773 cmd.parm.cmsg.Subcommand = CAPI_REQ; 774 cmd.parm.cmsg.adr.Controller = info->isdn_driver + 1; 775 cmd.parm.cmsg.para[0] = 3; /* 16 bit 0x0003 suplementary service */ 776 cmd.parm.cmsg.para[1] = 0; 777 cmd.parm.cmsg.para[2] = l + 3; 778 cmd.parm.cmsg.para[3] = 4; /* 16 bit 0x0004 Suspend */ 779 cmd.parm.cmsg.para[4] = 0; 780 cmd.parm.cmsg.para[5] = l; 781 strncpy(&cmd.parm.cmsg.para[6], id, l); 782 cmd.command = CAPI_PUT_MESSAGE; 783 cmd.driver = info->isdn_driver; 784 cmd.arg = info->isdn_channel; 785 isdn_command(&cmd); 786 } 787} 788 789/* isdn_tty_resume() tries to resume a suspended call 790 * setup of the lower levels before that. unfortunatly here is no 791 * checking for compatibility of used protocols implemented by Q931 792 * It does the same things like isdn_tty_dial, the last command 793 * is different, may be we can merge it. 794 */ 795 796static void 797isdn_tty_resume(char *id, modem_info * info, atemu * m) 798{ 799 int usg = ISDN_USAGE_MODEM; 800 int si = 7; 801 int l2 = m->mdmreg[REG_L2PROT]; 802 isdn_ctrl cmd; 803 ulong flags; 804 int i; 805 int j; 806 int l; 807 808 l = strlen(id); 809 for (j = 7; j >= 0; j--) 810 if (m->mdmreg[REG_SI1] & (1 << j)) { 811 si = bit2si[j]; 812 break; 813 } 814 usg = isdn_calc_usage(si, l2); 815#ifdef CONFIG_ISDN_AUDIO 816 if ((si == 1) && 817 (l2 != ISDN_PROTO_L2_MODEM) 818#ifdef CONFIG_ISDN_TTY_FAX 819 && (l2 != ISDN_PROTO_L2_FAX) 820#endif 821 ) { 822 l2 = ISDN_PROTO_L2_TRANS; 823 usg = ISDN_USAGE_VOICE; 824 } 825#endif 826 m->mdmreg[REG_SI1I] = si2bit[si]; 827 spin_lock_irqsave(&dev->lock, flags); 828 i = isdn_get_free_channel(usg, l2, m->mdmreg[REG_L3PROT], -1, -1, m->msn); 829 if (i < 0) { 830 spin_unlock_irqrestore(&dev->lock, flags); 831 isdn_tty_modem_result(RESULT_NO_DIALTONE, info); 832 } else { 833 info->isdn_driver = dev->drvmap[i]; 834 info->isdn_channel = dev->chanmap[i]; 835 info->drv_index = i; 836 dev->m_idx[i] = info->line; 837 dev->usage[i] |= ISDN_USAGE_OUTGOING; 838 info->last_dir = 1; 839// strcpy(info->last_num, n); 840 isdn_info_update(); 841 spin_unlock_irqrestore(&dev->lock, flags); 842 cmd.driver = info->isdn_driver; 843 cmd.arg = info->isdn_channel; 844 cmd.command = ISDN_CMD_CLREAZ; 845 isdn_command(&cmd); 846 strcpy(cmd.parm.num, isdn_map_eaz2msn(m->msn, info->isdn_driver)); 847 cmd.driver = info->isdn_driver; 848 cmd.command = ISDN_CMD_SETEAZ; 849 isdn_command(&cmd); 850 cmd.driver = info->isdn_driver; 851 cmd.command = ISDN_CMD_SETL2; 852 info->last_l2 = l2; 853 cmd.arg = info->isdn_channel + (l2 << 8); 854 isdn_command(&cmd); 855 cmd.driver = info->isdn_driver; 856 cmd.command = ISDN_CMD_SETL3; 857 cmd.arg = info->isdn_channel + (m->mdmreg[REG_L3PROT] << 8); 858 isdn_command(&cmd); 859 cmd.driver = info->isdn_driver; 860 cmd.arg = info->isdn_channel; 861 cmd.parm.cmsg.Length = l+18; 862 cmd.parm.cmsg.Command = CAPI_FACILITY; 863 cmd.parm.cmsg.Subcommand = CAPI_REQ; 864 cmd.parm.cmsg.adr.Controller = info->isdn_driver + 1; 865 cmd.parm.cmsg.para[0] = 3; /* 16 bit 0x0003 suplementary service */ 866 cmd.parm.cmsg.para[1] = 0; 867 cmd.parm.cmsg.para[2] = l+3; 868 cmd.parm.cmsg.para[3] = 5; /* 16 bit 0x0005 Resume */ 869 cmd.parm.cmsg.para[4] = 0; 870 cmd.parm.cmsg.para[5] = l; 871 strncpy(&cmd.parm.cmsg.para[6], id, l); 872 cmd.command =CAPI_PUT_MESSAGE; 873 info->dialing = 1; 874// strcpy(dev->num[i], n); 875 isdn_info_update(); 876 isdn_command(&cmd); 877 isdn_timer_ctrl(ISDN_TIMER_CARRIER, 1); 878 } 879} 880 881/* isdn_tty_send_msg() sends a message to a HL driver 882 * This is used for hybrid modem cards to send AT commands to it 883 */ 884 885static void 886isdn_tty_send_msg(modem_info * info, atemu * m, char *msg) 887{ 888 int usg = ISDN_USAGE_MODEM; 889 int si = 7; 890 int l2 = m->mdmreg[REG_L2PROT]; 891 isdn_ctrl cmd; 892 ulong flags; 893 int i; 894 int j; 895 int l; 896 897 l = strlen(msg); 898 if (!l) { 899 isdn_tty_modem_result(RESULT_ERROR, info); 900 return; 901 } 902 for (j = 7; j >= 0; j--) 903 if (m->mdmreg[REG_SI1] & (1 << j)) { 904 si = bit2si[j]; 905 break; 906 } 907 usg = isdn_calc_usage(si, l2); 908#ifdef CONFIG_ISDN_AUDIO 909 if ((si == 1) && 910 (l2 != ISDN_PROTO_L2_MODEM) 911#ifdef CONFIG_ISDN_TTY_FAX 912 && (l2 != ISDN_PROTO_L2_FAX) 913#endif 914 ) { 915 l2 = ISDN_PROTO_L2_TRANS; 916 usg = ISDN_USAGE_VOICE; 917 } 918#endif 919 m->mdmreg[REG_SI1I] = si2bit[si]; 920 spin_lock_irqsave(&dev->lock, flags); 921 i = isdn_get_free_channel(usg, l2, m->mdmreg[REG_L3PROT], -1, -1, m->msn); 922 if (i < 0) { 923 spin_unlock_irqrestore(&dev->lock, flags); 924 isdn_tty_modem_result(RESULT_NO_DIALTONE, info); 925 } else { 926 info->isdn_driver = dev->drvmap[i]; 927 info->isdn_channel = dev->chanmap[i]; 928 info->drv_index = i; 929 dev->m_idx[i] = info->line; 930 dev->usage[i] |= ISDN_USAGE_OUTGOING; 931 info->last_dir = 1; 932 isdn_info_update(); 933 spin_unlock_irqrestore(&dev->lock, flags); 934 cmd.driver = info->isdn_driver; 935 cmd.arg = info->isdn_channel; 936 cmd.command = ISDN_CMD_CLREAZ; 937 isdn_command(&cmd); 938 strcpy(cmd.parm.num, isdn_map_eaz2msn(m->msn, info->isdn_driver)); 939 cmd.driver = info->isdn_driver; 940 cmd.command = ISDN_CMD_SETEAZ; 941 isdn_command(&cmd); 942 cmd.driver = info->isdn_driver; 943 cmd.command = ISDN_CMD_SETL2; 944 info->last_l2 = l2; 945 cmd.arg = info->isdn_channel + (l2 << 8); 946 isdn_command(&cmd); 947 cmd.driver = info->isdn_driver; 948 cmd.command = ISDN_CMD_SETL3; 949 cmd.arg = info->isdn_channel + (m->mdmreg[REG_L3PROT] << 8); 950 isdn_command(&cmd); 951 cmd.driver = info->isdn_driver; 952 cmd.arg = info->isdn_channel; 953 cmd.parm.cmsg.Length = l+14; 954 cmd.parm.cmsg.Command = CAPI_MANUFACTURER; 955 cmd.parm.cmsg.Subcommand = CAPI_REQ; 956 cmd.parm.cmsg.adr.Controller = info->isdn_driver + 1; 957 cmd.parm.cmsg.para[0] = l+1; 958 strncpy(&cmd.parm.cmsg.para[1], msg, l); 959 cmd.parm.cmsg.para[l+1] = 0xd; 960 cmd.command =CAPI_PUT_MESSAGE; 961/* info->dialing = 1; 962 strcpy(dev->num[i], n); 963 isdn_info_update(); 964*/ 965 isdn_command(&cmd); 966 } 967} 968 969static inline int 970isdn_tty_paranoia_check(modem_info *info, char *name, const char *routine) 971{ 972#ifdef MODEM_PARANOIA_CHECK 973 if (!info) { 974 printk(KERN_WARNING "isdn_tty: null info_struct for %s in %s\n", 975 name, routine); 976 return 1; 977 } 978 if (info->magic != ISDN_ASYNC_MAGIC) { 979 printk(KERN_WARNING "isdn_tty: bad magic for modem struct %s in %s\n", 980 name, routine); 981 return 1; 982 } 983#endif 984 return 0; 985} 986 987/* 988 * This routine is called to set the UART divisor registers to match 989 * the specified baud rate for a serial port. 990 */ 991static void 992isdn_tty_change_speed(modem_info * info) 993{ 994 uint cflag, 995 cval, 996 fcr, 997 quot; 998 int i; 999 1000 if (!info->tty || !info->tty->termios) 1001 return; 1002 cflag = info->tty->termios->c_cflag; 1003 1004 quot = i = cflag & CBAUD; 1005 if (i & CBAUDEX) { 1006 i &= ~CBAUDEX; 1007 if (i < 1 || i > 2) 1008 info->tty->termios->c_cflag &= ~CBAUDEX; 1009 else 1010 i += 15; 1011 } 1012 if (quot) { 1013 info->mcr |= UART_MCR_DTR; 1014 isdn_tty_modem_ncarrier(info); 1015 } else { 1016 info->mcr &= ~UART_MCR_DTR; 1017 if (info->emu.mdmreg[REG_DTRHUP] & BIT_DTRHUP) { 1018#ifdef ISDN_DEBUG_MODEM_HUP 1019 printk(KERN_DEBUG "Mhup in changespeed\n"); 1020#endif 1021 if (info->online) 1022 info->ncarrier = 1; 1023 isdn_tty_modem_reset_regs(info, 0); 1024 isdn_tty_modem_hup(info, 1); 1025 } 1026 return; 1027 } 1028 /* byte size and parity */ 1029 cval = cflag & (CSIZE | CSTOPB); 1030 cval >>= 4; 1031 if (cflag & PARENB) 1032 cval |= UART_LCR_PARITY; 1033 if (!(cflag & PARODD)) 1034 cval |= UART_LCR_EPAR; 1035 fcr = 0; 1036 1037 /* CTS flow control flag and modem status interrupts */ 1038 if (cflag & CRTSCTS) { 1039 info->flags |= ISDN_ASYNC_CTS_FLOW; 1040 } else 1041 info->flags &= ~ISDN_ASYNC_CTS_FLOW; 1042 if (cflag & CLOCAL) 1043 info->flags &= ~ISDN_ASYNC_CHECK_CD; 1044 else { 1045 info->flags |= ISDN_ASYNC_CHECK_CD; 1046 } 1047} 1048 1049static int 1050isdn_tty_startup(modem_info * info) 1051{ 1052 if (info->flags & ISDN_ASYNC_INITIALIZED) 1053 return 0; 1054 isdn_lock_drivers(); 1055#ifdef ISDN_DEBUG_MODEM_OPEN 1056 printk(KERN_DEBUG "starting up ttyi%d ...\n", info->line); 1057#endif 1058 /* 1059 * Now, initialize the UART 1060 */ 1061 info->mcr = UART_MCR_DTR | UART_MCR_RTS | UART_MCR_OUT2; 1062 if (info->tty) 1063 clear_bit(TTY_IO_ERROR, &info->tty->flags); 1064 /* 1065 * and set the speed of the serial port 1066 */ 1067 isdn_tty_change_speed(info); 1068 1069 info->flags |= ISDN_ASYNC_INITIALIZED; 1070 info->msr |= (UART_MSR_DSR | UART_MSR_CTS); 1071 info->send_outstanding = 0; 1072 return 0; 1073} 1074 1075/* 1076 * This routine will shutdown a serial port; interrupts are disabled, and 1077 * DTR is dropped if the hangup on close termio flag is on. 1078 */ 1079static void 1080isdn_tty_shutdown(modem_info * info) 1081{ 1082 if (!(info->flags & ISDN_ASYNC_INITIALIZED)) 1083 return; 1084#ifdef ISDN_DEBUG_MODEM_OPEN 1085 printk(KERN_DEBUG "Shutting down isdnmodem port %d ....\n", info->line); 1086#endif 1087 isdn_unlock_drivers(); 1088 info->msr &= ~UART_MSR_RI; 1089 if (!info->tty || (info->tty->termios->c_cflag & HUPCL)) { 1090 info->mcr &= ~(UART_MCR_DTR | UART_MCR_RTS); 1091 if (info->emu.mdmreg[REG_DTRHUP] & BIT_DTRHUP) { 1092 isdn_tty_modem_reset_regs(info, 0); 1093#ifdef ISDN_DEBUG_MODEM_HUP 1094 printk(KERN_DEBUG "Mhup in isdn_tty_shutdown\n"); 1095#endif 1096 isdn_tty_modem_hup(info, 1); 1097 } 1098 } 1099 if (info->tty) 1100 set_bit(TTY_IO_ERROR, &info->tty->flags); 1101 1102 info->flags &= ~ISDN_ASYNC_INITIALIZED; 1103} 1104 1105/* isdn_tty_write() is the main send-routine. It is called from the upper 1106 * levels within the kernel to perform sending data. Depending on the 1107 * online-flag it either directs output to the at-command-interpreter or 1108 * to the lower level. Additional tasks done here: 1109 * - If online, check for escape-sequence (+++) 1110 * - If sending audio-data, call isdn_tty_DLEdown() to parse DLE-codes. 1111 * - If receiving audio-data, call isdn_tty_end_vrx() to abort if needed. 1112 * - If dialing, abort dial. 1113 */ 1114static int 1115isdn_tty_write(struct tty_struct *tty, const u_char * buf, int count) 1116{ 1117 int c; 1118 int total = 0; 1119 modem_info *info = (modem_info *) tty->driver_data; 1120 atemu *m = &info->emu; 1121 1122 if (isdn_tty_paranoia_check(info, tty->name, "isdn_tty_write")) 1123 return 0; 1124 /* See isdn_tty_senddown() */ 1125 atomic_inc(&info->xmit_lock); 1126 while (1) { 1127 c = count; 1128 if (c > info->xmit_size - info->xmit_count) 1129 c = info->xmit_size - info->xmit_count; 1130 if (info->isdn_driver >= 0 && c > dev->drv[info->isdn_driver]->maxbufsize) 1131 c = dev->drv[info->isdn_driver]->maxbufsize; 1132 if (c <= 0) 1133 break; 1134 if ((info->online > 1) 1135#ifdef CONFIG_ISDN_AUDIO 1136 || (info->vonline & 3) 1137#endif 1138 ) { 1139#ifdef CONFIG_ISDN_AUDIO 1140 if (!info->vonline) 1141#endif 1142 isdn_tty_check_esc(buf, m->mdmreg[REG_ESC], c, 1143 &(m->pluscount), 1144 &(m->lastplus)); 1145 memcpy(&(info->xmit_buf[info->xmit_count]), buf, c); 1146#ifdef CONFIG_ISDN_AUDIO 1147 if (info->vonline) { 1148 int cc = isdn_tty_handleDLEdown(info, m, c); 1149 if (info->vonline & 2) { 1150 if (!cc) { 1151 /* If DLE decoding results in zero-transmit, but 1152 * c originally was non-zero, do a wakeup. 1153 */ 1154 tty_wakeup(tty); 1155 info->msr |= UART_MSR_CTS; 1156 info->lsr |= UART_LSR_TEMT; 1157 } 1158 info->xmit_count += cc; 1159 } 1160 if ((info->vonline & 3) == 1) { 1161 /* Do NOT handle Ctrl-Q or Ctrl-S 1162 * when in full-duplex audio mode. 1163 */ 1164 if (isdn_tty_end_vrx(buf, c)) { 1165 info->vonline &= ~1; 1166#ifdef ISDN_DEBUG_MODEM_VOICE 1167 printk(KERN_DEBUG 1168 "got !^Q/^S, send DLE-ETX,VCON on ttyI%d\n", 1169 info->line); 1170#endif 1171 isdn_tty_at_cout("\020\003\r\nVCON\r\n", info); 1172 } 1173 } 1174 } else 1175 if (TTY_IS_FCLASS1(info)) { 1176 int cc = isdn_tty_handleDLEdown(info, m, c); 1177 1178 if (info->vonline & 4) { /* ETX seen */ 1179 isdn_ctrl c; 1180 1181 c.command = ISDN_CMD_FAXCMD; 1182 c.driver = info->isdn_driver; 1183 c.arg = info->isdn_channel; 1184 c.parm.aux.cmd = ISDN_FAX_CLASS1_CTRL; 1185 c.parm.aux.subcmd = ETX; 1186 isdn_command(&c); 1187 } 1188 info->vonline = 0; 1189#ifdef ISDN_DEBUG_MODEM_VOICE 1190 printk(KERN_DEBUG "fax dle cc/c %d/%d\n", cc, c); 1191#endif 1192 info->xmit_count += cc; 1193 } else 1194#endif 1195 info->xmit_count += c; 1196 } else { 1197 info->msr |= UART_MSR_CTS; 1198 info->lsr |= UART_LSR_TEMT; 1199 if (info->dialing) { 1200 info->dialing = 0; 1201#ifdef ISDN_DEBUG_MODEM_HUP 1202 printk(KERN_DEBUG "Mhup in isdn_tty_write\n"); 1203#endif 1204 isdn_tty_modem_result(RESULT_NO_CARRIER, info); 1205 isdn_tty_modem_hup(info, 1); 1206 } else 1207 c = isdn_tty_edit_at(buf, c, info); 1208 } 1209 buf += c; 1210 count -= c; 1211 total += c; 1212 } 1213 atomic_dec(&info->xmit_lock); 1214 if ((info->xmit_count) || !skb_queue_empty(&info->xmit_queue)) { 1215 if (m->mdmreg[REG_DXMT] & BIT_DXMT) { 1216 isdn_tty_senddown(info); 1217 isdn_tty_tint(info); 1218 } 1219 isdn_timer_ctrl(ISDN_TIMER_MODEMXMIT, 1); 1220 } 1221 return total; 1222} 1223 1224static int 1225isdn_tty_write_room(struct tty_struct *tty) 1226{ 1227 modem_info *info = (modem_info *) tty->driver_data; 1228 int ret; 1229 1230 if (isdn_tty_paranoia_check(info, tty->name, "isdn_tty_write_room")) 1231 return 0; 1232 if (!info->online) 1233 return info->xmit_size; 1234 ret = info->xmit_size - info->xmit_count; 1235 return (ret < 0) ? 0 : ret; 1236} 1237 1238static int 1239isdn_tty_chars_in_buffer(struct tty_struct *tty) 1240{ 1241 modem_info *info = (modem_info *) tty->driver_data; 1242 1243 if (isdn_tty_paranoia_check(info, tty->name, "isdn_tty_chars_in_buffer")) 1244 return 0; 1245 if (!info->online) 1246 return 0; 1247 return (info->xmit_count); 1248} 1249 1250static void 1251isdn_tty_flush_buffer(struct tty_struct *tty) 1252{ 1253 modem_info *info; 1254 1255 if (!tty) { 1256 return; 1257 } 1258 info = (modem_info *) tty->driver_data; 1259 if (isdn_tty_paranoia_check(info, tty->name, "isdn_tty_flush_buffer")) { 1260 return; 1261 } 1262 isdn_tty_cleanup_xmit(info); 1263 info->xmit_count = 0; 1264 wake_up_interruptible(&tty->write_wait); 1265 tty_wakeup(tty); 1266} 1267 1268static void 1269isdn_tty_flush_chars(struct tty_struct *tty) 1270{ 1271 modem_info *info = (modem_info *) tty->driver_data; 1272 1273 if (isdn_tty_paranoia_check(info, tty->name, "isdn_tty_flush_chars")) 1274 return; 1275 if ((info->xmit_count) || !skb_queue_empty(&info->xmit_queue)) 1276 isdn_timer_ctrl(ISDN_TIMER_MODEMXMIT, 1); 1277} 1278 1279/* 1280 * ------------------------------------------------------------ 1281 * isdn_tty_throttle() 1282 * 1283 * This routine is called by the upper-layer tty layer to signal that 1284 * incoming characters should be throttled. 1285 * ------------------------------------------------------------ 1286 */ 1287static void 1288isdn_tty_throttle(struct tty_struct *tty) 1289{ 1290 modem_info *info = (modem_info *) tty->driver_data; 1291 1292 if (isdn_tty_paranoia_check(info, tty->name, "isdn_tty_throttle")) 1293 return; 1294 if (I_IXOFF(tty)) 1295 info->x_char = STOP_CHAR(tty); 1296 info->mcr &= ~UART_MCR_RTS; 1297} 1298 1299static void 1300isdn_tty_unthrottle(struct tty_struct *tty) 1301{ 1302 modem_info *info = (modem_info *) tty->driver_data; 1303 1304 if (isdn_tty_paranoia_check(info, tty->name, "isdn_tty_unthrottle")) 1305 return; 1306 if (I_IXOFF(tty)) { 1307 if (info->x_char) 1308 info->x_char = 0; 1309 else 1310 info->x_char = START_CHAR(tty); 1311 } 1312 info->mcr |= UART_MCR_RTS; 1313} 1314 1315/* 1316 * ------------------------------------------------------------ 1317 * isdn_tty_ioctl() and friends 1318 * ------------------------------------------------------------ 1319 */ 1320 1321/* 1322 * isdn_tty_get_lsr_info - get line status register info 1323 * 1324 * Purpose: Let user call ioctl() to get info when the UART physically 1325 * is emptied. On bus types like RS485, the transmitter must 1326 * release the bus after transmitting. This must be done when 1327 * the transmit shift register is empty, not be done when the 1328 * transmit holding register is empty. This functionality 1329 * allows RS485 driver to be written in user space. 1330 */ 1331static int 1332isdn_tty_get_lsr_info(modem_info * info, uint __user * value) 1333{ 1334 u_char status; 1335 uint result; 1336 1337 status = info->lsr; 1338 result = ((status & UART_LSR_TEMT) ? TIOCSER_TEMT : 0); 1339 return put_user(result, value); 1340} 1341 1342 1343static int 1344isdn_tty_tiocmget(struct tty_struct *tty, struct file *file) 1345{ 1346 modem_info *info = (modem_info *) tty->driver_data; 1347 u_char control, status; 1348 1349 if (isdn_tty_paranoia_check(info, tty->name, __FUNCTION__)) 1350 return -ENODEV; 1351 if (tty->flags & (1 << TTY_IO_ERROR)) 1352 return -EIO; 1353 1354#ifdef ISDN_DEBUG_MODEM_IOCTL 1355 printk(KERN_DEBUG "ttyI%d ioctl TIOCMGET\n", info->line); 1356#endif 1357 1358 control = info->mcr; 1359 status = info->msr; 1360 return ((control & UART_MCR_RTS) ? TIOCM_RTS : 0) 1361 | ((control & UART_MCR_DTR) ? TIOCM_DTR : 0) 1362 | ((status & UART_MSR_DCD) ? TIOCM_CAR : 0) 1363 | ((status & UART_MSR_RI) ? TIOCM_RNG : 0) 1364 | ((status & UART_MSR_DSR) ? TIOCM_DSR : 0) 1365 | ((status & UART_MSR_CTS) ? TIOCM_CTS : 0); 1366} 1367 1368static int 1369isdn_tty_tiocmset(struct tty_struct *tty, struct file *file, 1370 unsigned int set, unsigned int clear) 1371{ 1372 modem_info *info = (modem_info *) tty->driver_data; 1373 1374 if (isdn_tty_paranoia_check(info, tty->name, __FUNCTION__)) 1375 return -ENODEV; 1376 if (tty->flags & (1 << TTY_IO_ERROR)) 1377 return -EIO; 1378 1379#ifdef ISDN_DEBUG_MODEM_IOCTL 1380 printk(KERN_DEBUG "ttyI%d ioctl TIOCMxxx: %x %x\n", info->line, set, clear); 1381#endif 1382 1383 if (set & TIOCM_RTS) 1384 info->mcr |= UART_MCR_RTS; 1385 if (set & TIOCM_DTR) { 1386 info->mcr |= UART_MCR_DTR; 1387 isdn_tty_modem_ncarrier(info); 1388 } 1389 1390 if (clear & TIOCM_RTS) 1391 info->mcr &= ~UART_MCR_RTS; 1392 if (clear & TIOCM_DTR) { 1393 info->mcr &= ~UART_MCR_DTR; 1394 if (info->emu.mdmreg[REG_DTRHUP] & BIT_DTRHUP) { 1395 isdn_tty_modem_reset_regs(info, 0); 1396#ifdef ISDN_DEBUG_MODEM_HUP 1397 printk(KERN_DEBUG "Mhup in TIOCMSET\n"); 1398#endif 1399 if (info->online) 1400 info->ncarrier = 1; 1401 isdn_tty_modem_hup(info, 1); 1402 } 1403 } 1404 return 0; 1405} 1406 1407static int 1408isdn_tty_ioctl(struct tty_struct *tty, struct file *file, 1409 uint cmd, ulong arg) 1410{ 1411 modem_info *info = (modem_info *) tty->driver_data; 1412 int retval; 1413 1414 if (isdn_tty_paranoia_check(info, tty->name, "isdn_tty_ioctl")) 1415 return -ENODEV; 1416 if (tty->flags & (1 << TTY_IO_ERROR)) 1417 return -EIO; 1418 switch (cmd) { 1419 case TCSBRK: /* SVID version: non-zero arg --> no break */ 1420#ifdef ISDN_DEBUG_MODEM_IOCTL 1421 printk(KERN_DEBUG "ttyI%d ioctl TCSBRK\n", info->line); 1422#endif 1423 retval = tty_check_change(tty); 1424 if (retval) 1425 return retval; 1426 tty_wait_until_sent(tty, 0); 1427 return 0; 1428 case TCSBRKP: /* support for POSIX tcsendbreak() */ 1429#ifdef ISDN_DEBUG_MODEM_IOCTL 1430 printk(KERN_DEBUG "ttyI%d ioctl TCSBRKP\n", info->line); 1431#endif 1432 retval = tty_check_change(tty); 1433 if (retval) 1434 return retval; 1435 tty_wait_until_sent(tty, 0); 1436 return 0; 1437 case TIOCGSOFTCAR: 1438#ifdef ISDN_DEBUG_MODEM_IOCTL 1439 printk(KERN_DEBUG "ttyI%d ioctl TIOCGSOFTCAR\n", info->line); 1440#endif 1441 return put_user(C_CLOCAL(tty) ? 1 : 0, (ulong __user *) arg); 1442 case TIOCSSOFTCAR: 1443#ifdef ISDN_DEBUG_MODEM_IOCTL 1444 printk(KERN_DEBUG "ttyI%d ioctl TIOCSSOFTCAR\n", info->line); 1445#endif 1446 if (get_user(arg, (ulong __user *) arg)) 1447 return -EFAULT; 1448 tty->termios->c_cflag = 1449 ((tty->termios->c_cflag & ~CLOCAL) | 1450 (arg ? CLOCAL : 0)); 1451 return 0; 1452 case TIOCSERGETLSR: /* Get line status register */ 1453#ifdef ISDN_DEBUG_MODEM_IOCTL 1454 printk(KERN_DEBUG "ttyI%d ioctl TIOCSERGETLSR\n", info->line); 1455#endif 1456 return isdn_tty_get_lsr_info(info, (uint __user *) arg); 1457 default: 1458#ifdef ISDN_DEBUG_MODEM_IOCTL 1459 printk(KERN_DEBUG "UNKNOWN ioctl 0x%08x on ttyi%d\n", cmd, info->line); 1460#endif 1461 return -ENOIOCTLCMD; 1462 } 1463 return 0; 1464} 1465 1466static void 1467isdn_tty_set_termios(struct tty_struct *tty, struct ktermios *old_termios) 1468{ 1469 modem_info *info = (modem_info *) tty->driver_data; 1470 1471 if (!old_termios) 1472 isdn_tty_change_speed(info); 1473 else { 1474 if (tty->termios->c_cflag == old_termios->c_cflag) 1475 return; 1476 isdn_tty_change_speed(info); 1477 if ((old_termios->c_cflag & CRTSCTS) && 1478 !(tty->termios->c_cflag & CRTSCTS)) { 1479 tty->hw_stopped = 0; 1480 } 1481 } 1482} 1483 1484/* 1485 * ------------------------------------------------------------ 1486 * isdn_tty_open() and friends 1487 * ------------------------------------------------------------ 1488 */ 1489static int 1490isdn_tty_block_til_ready(struct tty_struct *tty, struct file *filp, modem_info * info) 1491{ 1492 DECLARE_WAITQUEUE(wait, NULL); 1493 int do_clocal = 0; 1494 int retval; 1495 1496 /* 1497 * If the device is in the middle of being closed, then block 1498 * until it's done, and then try again. 1499 */ 1500 if (tty_hung_up_p(filp) || 1501 (info->flags & ISDN_ASYNC_CLOSING)) { 1502 if (info->flags & ISDN_ASYNC_CLOSING) 1503 interruptible_sleep_on(&info->close_wait); 1504#ifdef MODEM_DO_RESTART 1505 if (info->flags & ISDN_ASYNC_HUP_NOTIFY) 1506 return -EAGAIN; 1507 else 1508 return -ERESTARTSYS; 1509#else 1510 return -EAGAIN; 1511#endif 1512 } 1513 /* 1514 * If non-blocking mode is set, then make the check up front 1515 * and then exit. 1516 */ 1517 if ((filp->f_flags & O_NONBLOCK) || 1518 (tty->flags & (1 << TTY_IO_ERROR))) { 1519 if (info->flags & ISDN_ASYNC_CALLOUT_ACTIVE) 1520 return -EBUSY; 1521 info->flags |= ISDN_ASYNC_NORMAL_ACTIVE; 1522 return 0; 1523 } 1524 if (info->flags & ISDN_ASYNC_CALLOUT_ACTIVE) { 1525 if (info->normal_termios.c_cflag & CLOCAL) 1526 do_clocal = 1; 1527 } else { 1528 if (tty->termios->c_cflag & CLOCAL) 1529 do_clocal = 1; 1530 } 1531 /* 1532 * Block waiting for the carrier detect and the line to become 1533 * free (i.e., not in use by the callout). While we are in 1534 * this loop, info->count is dropped by one, so that 1535 * isdn_tty_close() knows when to free things. We restore it upon 1536 * exit, either normal or abnormal. 1537 */ 1538 retval = 0; 1539 add_wait_queue(&info->open_wait, &wait); 1540#ifdef ISDN_DEBUG_MODEM_OPEN 1541 printk(KERN_DEBUG "isdn_tty_block_til_ready before block: ttyi%d, count = %d\n", 1542 info->line, info->count); 1543#endif 1544 if (!(tty_hung_up_p(filp))) 1545 info->count--; 1546 info->blocked_open++; 1547 while (1) { 1548 set_current_state(TASK_INTERRUPTIBLE); 1549 if (tty_hung_up_p(filp) || 1550 !(info->flags & ISDN_ASYNC_INITIALIZED)) { 1551#ifdef MODEM_DO_RESTART 1552 if (info->flags & ISDN_ASYNC_HUP_NOTIFY) 1553 retval = -EAGAIN; 1554 else 1555 retval = -ERESTARTSYS; 1556#else 1557 retval = -EAGAIN; 1558#endif 1559 break; 1560 } 1561 if (!(info->flags & ISDN_ASYNC_CALLOUT_ACTIVE) && 1562 !(info->flags & ISDN_ASYNC_CLOSING) && 1563 (do_clocal || (info->msr & UART_MSR_DCD))) { 1564 break; 1565 } 1566 if (signal_pending(current)) { 1567 retval = -ERESTARTSYS; 1568 break; 1569 } 1570#ifdef ISDN_DEBUG_MODEM_OPEN 1571 printk(KERN_DEBUG "isdn_tty_block_til_ready blocking: ttyi%d, count = %d\n", 1572 info->line, info->count); 1573#endif 1574 schedule(); 1575 } 1576 current->state = TASK_RUNNING; 1577 remove_wait_queue(&info->open_wait, &wait); 1578 if (!tty_hung_up_p(filp)) 1579 info->count++; 1580 info->blocked_open--; 1581#ifdef ISDN_DEBUG_MODEM_OPEN 1582 printk(KERN_DEBUG "isdn_tty_block_til_ready after blocking: ttyi%d, count = %d\n", 1583 info->line, info->count); 1584#endif 1585 if (retval) 1586 return retval; 1587 info->flags |= ISDN_ASYNC_NORMAL_ACTIVE; 1588 return 0; 1589} 1590 1591/* 1592 * This routine is called whenever a serial port is opened. It 1593 * enables interrupts for a serial port, linking in its async structure into 1594 * the IRQ chain. It also performs the serial-specific 1595 * initialization for the tty structure. 1596 */ 1597static int 1598isdn_tty_open(struct tty_struct *tty, struct file *filp) 1599{ 1600 modem_info *info; 1601 int retval, line; 1602 1603 line = tty->index; 1604 if (line < 0 || line > ISDN_MAX_CHANNELS) 1605 return -ENODEV; 1606 info = &dev->mdm.info[line]; 1607 if (isdn_tty_paranoia_check(info, tty->name, "isdn_tty_open")) 1608 return -ENODEV; 1609 if (!try_module_get(info->owner)) { 1610 printk(KERN_WARNING "%s: cannot reserve module\n", __FUNCTION__); 1611 return -ENODEV; 1612 } 1613#ifdef ISDN_DEBUG_MODEM_OPEN 1614 printk(KERN_DEBUG "isdn_tty_open %s, count = %d\n", tty->name, 1615 info->count); 1616#endif 1617 info->count++; 1618 tty->driver_data = info; 1619 info->tty = tty; 1620 /* 1621 * Start up serial port 1622 */ 1623 retval = isdn_tty_startup(info); 1624 if (retval) { 1625#ifdef ISDN_DEBUG_MODEM_OPEN 1626 printk(KERN_DEBUG "isdn_tty_open return after startup\n"); 1627#endif 1628 module_put(info->owner); 1629 return retval; 1630 } 1631 retval = isdn_tty_block_til_ready(tty, filp, info); 1632 if (retval) { 1633#ifdef ISDN_DEBUG_MODEM_OPEN 1634 printk(KERN_DEBUG "isdn_tty_open return after isdn_tty_block_til_ready \n"); 1635#endif 1636 module_put(info->owner); 1637 return retval; 1638 } 1639#ifdef ISDN_DEBUG_MODEM_OPEN 1640 printk(KERN_DEBUG "isdn_tty_open ttyi%d successful...\n", info->line); 1641#endif 1642 dev->modempoll++; 1643#ifdef ISDN_DEBUG_MODEM_OPEN 1644 printk(KERN_DEBUG "isdn_tty_open normal exit\n"); 1645#endif 1646 return 0; 1647} 1648 1649static void 1650isdn_tty_close(struct tty_struct *tty, struct file *filp) 1651{ 1652 modem_info *info = (modem_info *) tty->driver_data; 1653 ulong timeout; 1654 1655 if (!info || isdn_tty_paranoia_check(info, tty->name, "isdn_tty_close")) 1656 return; 1657 if (tty_hung_up_p(filp)) { 1658#ifdef ISDN_DEBUG_MODEM_OPEN 1659 printk(KERN_DEBUG "isdn_tty_close return after tty_hung_up_p\n"); 1660#endif 1661 return; 1662 } 1663 if ((tty->count == 1) && (info->count != 1)) { 1664 /* 1665 * Uh, oh. tty->count is 1, which means that the tty 1666 * structure will be freed. Info->count should always 1667 * be one in these conditions. If it's greater than 1668 * one, we've got real problems, since it means the 1669 * serial port won't be shutdown. 1670 */ 1671 printk(KERN_ERR "isdn_tty_close: bad port count; tty->count is 1, " 1672 "info->count is %d\n", info->count); 1673 info->count = 1; 1674 } 1675 if (--info->count < 0) { 1676 printk(KERN_ERR "isdn_tty_close: bad port count for ttyi%d: %d\n", 1677 info->line, info->count); 1678 info->count = 0; 1679 } 1680 if (info->count) { 1681#ifdef ISDN_DEBUG_MODEM_OPEN 1682 printk(KERN_DEBUG "isdn_tty_close after info->count != 0\n"); 1683#endif 1684 module_put(info->owner); 1685 return; 1686 } 1687 info->flags |= ISDN_ASYNC_CLOSING; 1688 /* 1689 * Save the termios structure, since this port may have 1690 * separate termios for callout and dialin. 1691 */ 1692 if (info->flags & ISDN_ASYNC_NORMAL_ACTIVE) 1693 info->normal_termios = *tty->termios; 1694 if (info->flags & ISDN_ASYNC_CALLOUT_ACTIVE) 1695 info->callout_termios = *tty->termios; 1696 1697 tty->closing = 1; 1698 /* 1699 * At this point we stop accepting input. To do this, we 1700 * disable the receive line status interrupts, and tell the 1701 * interrupt driver to stop checking the data ready bit in the 1702 * line status register. 1703 */ 1704 if (info->flags & ISDN_ASYNC_INITIALIZED) { 1705 tty_wait_until_sent(tty, 3000); /* 30 seconds timeout */ 1706 /* 1707 * Before we drop DTR, make sure the UART transmitter 1708 * has completely drained; this is especially 1709 * important if there is a transmit FIFO! 1710 */ 1711 timeout = jiffies + HZ; 1712 while (!(info->lsr & UART_LSR_TEMT)) { 1713 schedule_timeout_interruptible(20); 1714 if (time_after(jiffies,timeout)) 1715 break; 1716 } 1717 } 1718 dev->modempoll--; 1719 isdn_tty_shutdown(info); 1720 1721 if (tty->driver->flush_buffer) 1722 tty->driver->flush_buffer(tty); 1723 tty_ldisc_flush(tty); 1724 info->tty = NULL; 1725 info->ncarrier = 0; 1726 tty->closing = 0; 1727 module_put(info->owner); 1728 if (info->blocked_open) { 1729 msleep_interruptible(500); 1730 wake_up_interruptible(&info->open_wait); 1731 } 1732 info->flags &= ~(ISDN_ASYNC_NORMAL_ACTIVE | ISDN_ASYNC_CLOSING); 1733 wake_up_interruptible(&info->close_wait); 1734#ifdef ISDN_DEBUG_MODEM_OPEN 1735 printk(KERN_DEBUG "isdn_tty_close normal exit\n"); 1736#endif 1737} 1738 1739/* 1740 * isdn_tty_hangup() --- called by tty_hangup() when a hangup is signaled. 1741 */ 1742static void 1743isdn_tty_hangup(struct tty_struct *tty) 1744{ 1745 modem_info *info = (modem_info *) tty->driver_data; 1746 1747 if (isdn_tty_paranoia_check(info, tty->name, "isdn_tty_hangup")) 1748 return; 1749 isdn_tty_shutdown(info); 1750 info->count = 0; 1751 info->flags &= ~(ISDN_ASYNC_NORMAL_ACTIVE | ISDN_ASYNC_CALLOUT_ACTIVE); 1752 info->tty = NULL; 1753 wake_up_interruptible(&info->open_wait); 1754} 1755 1756/* This routine initializes all emulator-data. 1757 */ 1758static void 1759isdn_tty_reset_profile(atemu * m) 1760{ 1761 m->profile[0] = 0; 1762 m->profile[1] = 0; 1763 m->profile[2] = 43; 1764 m->profile[3] = 13; 1765 m->profile[4] = 10; 1766 m->profile[5] = 8; 1767 m->profile[6] = 3; 1768 m->profile[7] = 60; 1769 m->profile[8] = 2; 1770 m->profile[9] = 6; 1771 m->profile[10] = 7; 1772 m->profile[11] = 70; 1773 m->profile[12] = 0x45; 1774 m->profile[13] = 4; 1775 m->profile[14] = ISDN_PROTO_L2_X75I; 1776 m->profile[15] = ISDN_PROTO_L3_TRANS; 1777 m->profile[16] = ISDN_SERIAL_XMIT_SIZE / 16; 1778 m->profile[17] = ISDN_MODEM_WINSIZE; 1779 m->profile[18] = 4; 1780 m->profile[19] = 0; 1781 m->profile[20] = 0; 1782 m->profile[23] = 0; 1783 m->pmsn[0] = '\0'; 1784 m->plmsn[0] = '\0'; 1785} 1786 1787#ifdef CONFIG_ISDN_AUDIO 1788static void 1789isdn_tty_modem_reset_vpar(atemu * m) 1790{ 1791 m->vpar[0] = 2; /* Voice-device (2 = phone line) */ 1792 m->vpar[1] = 0; /* Silence detection level (0 = none ) */ 1793 m->vpar[2] = 70; /* Silence interval (7 sec. ) */ 1794 m->vpar[3] = 2; /* Compression type (1 = ADPCM-2 ) */ 1795 m->vpar[4] = 0; /* DTMF detection level (0 = softcode ) */ 1796 m->vpar[5] = 8; /* DTMF interval (8 * 5 ms. ) */ 1797} 1798#endif 1799 1800#ifdef CONFIG_ISDN_TTY_FAX 1801static void 1802isdn_tty_modem_reset_faxpar(modem_info * info) 1803{ 1804 T30_s *f = info->fax; 1805 1806 f->code = 0; 1807 f->phase = ISDN_FAX_PHASE_IDLE; 1808 f->direction = 0; 1809 f->resolution = 1; /* fine */ 1810 f->rate = 5; /* 14400 bit/s */ 1811 f->width = 0; 1812 f->length = 0; 1813 f->compression = 0; 1814 f->ecm = 0; 1815 f->binary = 0; 1816 f->scantime = 0; 1817 memset(&f->id[0], 32, FAXIDLEN - 1); 1818 f->id[FAXIDLEN - 1] = 0; 1819 f->badlin = 0; 1820 f->badmul = 0; 1821 f->bor = 0; 1822 f->nbc = 0; 1823 f->cq = 0; 1824 f->cr = 0; 1825 f->ctcrty = 0; 1826 f->minsp = 0; 1827 f->phcto = 30; 1828 f->rel = 0; 1829 memset(&f->pollid[0], 32, FAXIDLEN - 1); 1830 f->pollid[FAXIDLEN - 1] = 0; 1831} 1832#endif 1833 1834static void 1835isdn_tty_modem_reset_regs(modem_info * info, int force) 1836{ 1837 atemu *m = &info->emu; 1838 if ((m->mdmreg[REG_DTRR] & BIT_DTRR) || force) { 1839 memcpy(m->mdmreg, m->profile, ISDN_MODEM_NUMREG); 1840 memcpy(m->msn, m->pmsn, ISDN_MSNLEN); 1841 memcpy(m->lmsn, m->plmsn, ISDN_LMSNLEN); 1842 info->xmit_size = m->mdmreg[REG_PSIZE] * 16; 1843 } 1844#ifdef CONFIG_ISDN_AUDIO 1845 isdn_tty_modem_reset_vpar(m); 1846#endif 1847#ifdef CONFIG_ISDN_TTY_FAX 1848 isdn_tty_modem_reset_faxpar(info); 1849#endif 1850 m->mdmcmdl = 0; 1851} 1852 1853static void 1854modem_write_profile(atemu * m) 1855{ 1856 memcpy(m->profile, m->mdmreg, ISDN_MODEM_NUMREG); 1857 memcpy(m->pmsn, m->msn, ISDN_MSNLEN); 1858 memcpy(m->plmsn, m->lmsn, ISDN_LMSNLEN); 1859 if (dev->profd) 1860 send_sig(SIGIO, dev->profd, 1); 1861} 1862 1863static const struct tty_operations modem_ops = { 1864 .open = isdn_tty_open, 1865 .close = isdn_tty_close, 1866 .write = isdn_tty_write, 1867 .flush_chars = isdn_tty_flush_chars, 1868 .write_room = isdn_tty_write_room, 1869 .chars_in_buffer = isdn_tty_chars_in_buffer, 1870 .flush_buffer = isdn_tty_flush_buffer, 1871 .ioctl = isdn_tty_ioctl, 1872 .throttle = isdn_tty_throttle, 1873 .unthrottle = isdn_tty_unthrottle, 1874 .set_termios = isdn_tty_set_termios, 1875 .hangup = isdn_tty_hangup, 1876 .tiocmget = isdn_tty_tiocmget, 1877 .tiocmset = isdn_tty_tiocmset, 1878}; 1879 1880int 1881isdn_tty_modem_init(void) 1882{ 1883 isdn_modem_t *m; 1884 int i, retval; 1885 modem_info *info; 1886 1887 m = &dev->mdm; 1888 m->tty_modem = alloc_tty_driver(ISDN_MAX_CHANNELS); 1889 if (!m->tty_modem) 1890 return -ENOMEM; 1891 m->tty_modem->name = "ttyI"; 1892 m->tty_modem->major = ISDN_TTY_MAJOR; 1893 m->tty_modem->minor_start = 0; 1894 m->tty_modem->type = TTY_DRIVER_TYPE_SERIAL; 1895 m->tty_modem->subtype = SERIAL_TYPE_NORMAL; 1896 m->tty_modem->init_termios = tty_std_termios; 1897 m->tty_modem->init_termios.c_cflag = B9600 | CS8 | CREAD | HUPCL | CLOCAL; 1898 m->tty_modem->flags = TTY_DRIVER_REAL_RAW | TTY_DRIVER_DYNAMIC_DEV; 1899 m->tty_modem->driver_name = "isdn_tty"; 1900 tty_set_operations(m->tty_modem, &modem_ops); 1901 retval = tty_register_driver(m->tty_modem); 1902 if (retval) { 1903 printk(KERN_WARNING "isdn_tty: Couldn't register modem-device\n"); 1904 goto err; 1905 } 1906 for (i = 0; i < ISDN_MAX_CHANNELS; i++) { 1907 info = &m->info[i]; 1908#ifdef CONFIG_ISDN_TTY_FAX 1909 if (!(info->fax = kmalloc(sizeof(T30_s), GFP_KERNEL))) { 1910 printk(KERN_ERR "Could not allocate fax t30-buffer\n"); 1911 retval = -ENOMEM; 1912 goto err_unregister; 1913 } 1914#endif 1915#ifdef MODULE 1916 info->owner = THIS_MODULE; 1917#endif 1918 spin_lock_init(&info->readlock); 1919 init_MUTEX(&info->write_sem); 1920 sprintf(info->last_cause, "0000"); 1921 sprintf(info->last_num, "none"); 1922 info->last_dir = 0; 1923 info->last_lhup = 1; 1924 info->last_l2 = -1; 1925 info->last_si = 0; 1926 isdn_tty_reset_profile(&info->emu); 1927 isdn_tty_modem_reset_regs(info, 1); 1928 info->magic = ISDN_ASYNC_MAGIC; 1929 info->line = i; 1930 info->tty = NULL; 1931 info->x_char = 0; 1932 info->count = 0; 1933 info->blocked_open = 0; 1934 init_waitqueue_head(&info->open_wait); 1935 init_waitqueue_head(&info->close_wait); 1936 info->isdn_driver = -1; 1937 info->isdn_channel = -1; 1938 info->drv_index = -1; 1939 info->xmit_size = ISDN_SERIAL_XMIT_SIZE; 1940 init_timer(&info->nc_timer); 1941 info->nc_timer.function = isdn_tty_modem_do_ncarrier; 1942 info->nc_timer.data = (unsigned long) info; 1943 skb_queue_head_init(&info->xmit_queue); 1944#ifdef CONFIG_ISDN_AUDIO 1945 skb_queue_head_init(&info->dtmf_queue); 1946#endif 1947 if (!(info->xmit_buf = kmalloc(ISDN_SERIAL_XMIT_MAX + 5, GFP_KERNEL))) { 1948 printk(KERN_ERR "Could not allocate modem xmit-buffer\n"); 1949 retval = -ENOMEM; 1950 goto err_unregister; 1951 } 1952 /* Make room for T.70 header */ 1953 info->xmit_buf += 4; 1954 } 1955 return 0; 1956err_unregister: 1957 for (i--; i >= 0; i--) { 1958 info = &m->info[i]; 1959#ifdef CONFIG_ISDN_TTY_FAX 1960 kfree(info->fax); 1961#endif 1962 kfree(info->xmit_buf - 4); 1963 } 1964 tty_unregister_driver(m->tty_modem); 1965 err: 1966 put_tty_driver(m->tty_modem); 1967 m->tty_modem = NULL; 1968 return retval; 1969} 1970 1971void 1972isdn_tty_exit(void) 1973{ 1974 modem_info *info; 1975 int i; 1976 1977 for (i = 0; i < ISDN_MAX_CHANNELS; i++) { 1978 info = &dev->mdm.info[i]; 1979 isdn_tty_cleanup_xmit(info); 1980#ifdef CONFIG_ISDN_TTY_FAX 1981 kfree(info->fax); 1982#endif 1983 kfree(info->xmit_buf - 4); 1984 } 1985 tty_unregister_driver(dev->mdm.tty_modem); 1986 put_tty_driver(dev->mdm.tty_modem); 1987 dev->mdm.tty_modem = NULL; 1988} 1989 1990 1991/* 1992 * isdn_tty_match_icall(char *MSN, atemu *tty_emulator, int dev_idx) 1993 * match the MSN against the MSNs (glob patterns) defined for tty_emulator, 1994 * and return 0 for match, 1 for no match, 2 if MSN could match if longer. 1995 */ 1996 1997static int 1998isdn_tty_match_icall(char *cid, atemu *emu, int di) 1999{ 2000#ifdef ISDN_DEBUG_MODEM_ICALL 2001 printk(KERN_DEBUG "m_fi: msn=%s lmsn=%s mmsn=%s mreg[SI1]=%d mreg[SI2]=%d\n", 2002 emu->msn, emu->lmsn, isdn_map_eaz2msn(emu->msn, di), 2003 emu->mdmreg[REG_SI1], emu->mdmreg[REG_SI2]); 2004#endif 2005 if (strlen(emu->lmsn)) { 2006 char *p = emu->lmsn; 2007 char *q; 2008 int tmp; 2009 int ret = 0; 2010 2011 while (1) { 2012 if ((q = strchr(p, ';'))) 2013 *q = '\0'; 2014 if ((tmp = isdn_msncmp(cid, isdn_map_eaz2msn(p, di))) > ret) 2015 ret = tmp; 2016#ifdef ISDN_DEBUG_MODEM_ICALL 2017 printk(KERN_DEBUG "m_fi: lmsnX=%s mmsn=%s -> tmp=%d\n", 2018 p, isdn_map_eaz2msn(emu->msn, di), tmp); 2019#endif 2020 if (q) { 2021 *q = ';'; 2022 p = q; 2023 p++; 2024 } 2025 if (!tmp) 2026 return 0; 2027 if (!q) 2028 break; 2029 } 2030 return ret; 2031 } else { 2032 int tmp; 2033 tmp = isdn_msncmp(cid, isdn_map_eaz2msn(emu->msn, di)); 2034#ifdef ISDN_DEBUG_MODEM_ICALL 2035 printk(KERN_DEBUG "m_fi: mmsn=%s -> tmp=%d\n", 2036 isdn_map_eaz2msn(emu->msn, di), tmp); 2037#endif 2038 return tmp; 2039 } 2040} 2041 2042/* 2043 * An incoming call-request has arrived. 2044 * Search the tty-devices for an appropriate device and bind 2045 * it to the ISDN-Channel. 2046 * Return: 2047 * 2048 * 0 = No matching device found. 2049 * 1 = A matching device found. 2050 * 3 = No match found, but eventually would match, if 2051 * CID is longer. 2052 */ 2053int 2054isdn_tty_find_icall(int di, int ch, setup_parm *setup) 2055{ 2056 char *eaz; 2057 int i; 2058 int wret; 2059 int idx; 2060 int si1; 2061 int si2; 2062 char *nr; 2063 ulong flags; 2064 2065 if (!setup->phone[0]) { 2066 nr = "0"; 2067 printk(KERN_INFO "isdn_tty: Incoming call without OAD, assuming '0'\n"); 2068 } else 2069 nr = setup->phone; 2070 si1 = (int) setup->si1; 2071 si2 = (int) setup->si2; 2072 if (!setup->eazmsn[0]) { 2073 printk(KERN_WARNING "isdn_tty: Incoming call without CPN, assuming '0'\n"); 2074 eaz = "0"; 2075 } else 2076 eaz = setup->eazmsn; 2077#ifdef ISDN_DEBUG_MODEM_ICALL 2078 printk(KERN_DEBUG "m_fi: eaz=%s si1=%d si2=%d\n", eaz, si1, si2); 2079#endif 2080 wret = 0; 2081 spin_lock_irqsave(&dev->lock, flags); 2082 for (i = 0; i < ISDN_MAX_CHANNELS; i++) { 2083 modem_info *info = &dev->mdm.info[i]; 2084 2085 if (info->count == 0) 2086 continue; 2087 if ((info->emu.mdmreg[REG_SI1] & si2bit[si1]) && /* SI1 is matching */ 2088 (info->emu.mdmreg[REG_SI2] == si2)) { /* SI2 is matching */ 2089 idx = isdn_dc2minor(di, ch); 2090#ifdef ISDN_DEBUG_MODEM_ICALL 2091 printk(KERN_DEBUG "m_fi: match1 wret=%d\n", wret); 2092 printk(KERN_DEBUG "m_fi: idx=%d flags=%08lx drv=%d ch=%d usg=%d\n", idx, 2093 info->flags, info->isdn_driver, info->isdn_channel, 2094 dev->usage[idx]); 2095#endif 2096 if ( 2097#ifndef FIX_FILE_TRANSFER 2098 (info->flags & ISDN_ASYNC_NORMAL_ACTIVE) && 2099#endif 2100 (info->isdn_driver == -1) && 2101 (info->isdn_channel == -1) && 2102 (USG_NONE(dev->usage[idx]))) { 2103 int matchret; 2104 2105 if ((matchret = isdn_tty_match_icall(eaz, &info->emu, di)) > wret) 2106 wret = matchret; 2107 if (!matchret) { /* EAZ is matching */ 2108 info->isdn_driver = di; 2109 info->isdn_channel = ch; 2110 info->drv_index = idx; 2111 dev->m_idx[idx] = info->line; 2112 dev->usage[idx] &= ISDN_USAGE_EXCLUSIVE; 2113 dev->usage[idx] |= isdn_calc_usage(si1, info->emu.mdmreg[REG_L2PROT]); 2114 strcpy(dev->num[idx], nr); 2115 strcpy(info->emu.cpn, eaz); 2116 info->emu.mdmreg[REG_SI1I] = si2bit[si1]; 2117 info->emu.mdmreg[REG_PLAN] = setup->plan; 2118 info->emu.mdmreg[REG_SCREEN] = setup->screen; 2119 isdn_info_update(); 2120 spin_unlock_irqrestore(&dev->lock, flags); 2121 printk(KERN_INFO "isdn_tty: call from %s, -> RING on ttyI%d\n", nr, 2122 info->line); 2123 info->msr |= UART_MSR_RI; 2124 isdn_tty_modem_result(RESULT_RING, info); 2125 isdn_timer_ctrl(ISDN_TIMER_MODEMRING, 1); 2126 return 1; 2127 } 2128 } 2129 } 2130 } 2131 spin_unlock_irqrestore(&dev->lock, flags); 2132 printk(KERN_INFO "isdn_tty: call from %s -> %s %s\n", nr, eaz, 2133 ((dev->drv[di]->flags & DRV_FLAG_REJBUS) && (wret != 2))? "rejected" : "ignored"); 2134 return (wret == 2)?3:0; 2135} 2136 2137#define TTY_IS_ACTIVE(info) \ 2138 (info->flags & (ISDN_ASYNC_NORMAL_ACTIVE | ISDN_ASYNC_CALLOUT_ACTIVE)) 2139 2140int 2141isdn_tty_stat_callback(int i, isdn_ctrl *c) 2142{ 2143 int mi; 2144 modem_info *info; 2145 char *e; 2146 2147 if (i < 0) 2148 return 0; 2149 if ((mi = dev->m_idx[i]) >= 0) { 2150 info = &dev->mdm.info[mi]; 2151 switch (c->command) { 2152 case ISDN_STAT_CINF: 2153 printk(KERN_DEBUG "CHARGEINFO on ttyI%d: %ld %s\n", info->line, c->arg, c->parm.num); 2154 info->emu.charge = (unsigned) simple_strtoul(c->parm.num, &e, 10); 2155 if (e == (char *)c->parm.num) 2156 info->emu.charge = 0; 2157 2158 break; 2159 case ISDN_STAT_BSENT: 2160#ifdef ISDN_TTY_STAT_DEBUG 2161 printk(KERN_DEBUG "tty_STAT_BSENT ttyI%d\n", info->line); 2162#endif 2163 if ((info->isdn_driver == c->driver) && 2164 (info->isdn_channel == c->arg)) { 2165 info->msr |= UART_MSR_CTS; 2166 if (info->send_outstanding) 2167 if (!(--info->send_outstanding)) 2168 info->lsr |= UART_LSR_TEMT; 2169 isdn_tty_tint(info); 2170 return 1; 2171 } 2172 break; 2173 case ISDN_STAT_CAUSE: 2174#ifdef ISDN_TTY_STAT_DEBUG 2175 printk(KERN_DEBUG "tty_STAT_CAUSE ttyI%d\n", info->line); 2176#endif 2177 /* Signal cause to tty-device */ 2178 strncpy(info->last_cause, c->parm.num, 5); 2179 return 1; 2180 case ISDN_STAT_DISPLAY: 2181#ifdef ISDN_TTY_STAT_DEBUG 2182 printk(KERN_DEBUG "tty_STAT_DISPLAY ttyI%d\n", info->line); 2183#endif 2184 /* Signal display to tty-device */ 2185 if ((info->emu.mdmreg[REG_DISPLAY] & BIT_DISPLAY) && 2186 !(info->emu.mdmreg[REG_RESPNUM] & BIT_RESPNUM)) { 2187 isdn_tty_at_cout("\r\n", info); 2188 isdn_tty_at_cout("DISPLAY: ", info); 2189 isdn_tty_at_cout(c->parm.display, info); 2190 isdn_tty_at_cout("\r\n", info); 2191 } 2192 return 1; 2193 case ISDN_STAT_DCONN: 2194#ifdef ISDN_TTY_STAT_DEBUG 2195 printk(KERN_DEBUG "tty_STAT_DCONN ttyI%d\n", info->line); 2196#endif 2197 if (TTY_IS_ACTIVE(info)) { 2198 if (info->dialing == 1) { 2199 info->dialing = 2; 2200 return 1; 2201 } 2202 } 2203 break; 2204 case ISDN_STAT_DHUP: 2205#ifdef ISDN_TTY_STAT_DEBUG 2206 printk(KERN_DEBUG "tty_STAT_DHUP ttyI%d\n", info->line); 2207#endif 2208 if (TTY_IS_ACTIVE(info)) { 2209 if (info->dialing == 1) 2210 isdn_tty_modem_result(RESULT_BUSY, info); 2211 if (info->dialing > 1) 2212 isdn_tty_modem_result(RESULT_NO_CARRIER, info); 2213 info->dialing = 0; 2214#ifdef ISDN_DEBUG_MODEM_HUP 2215 printk(KERN_DEBUG "Mhup in ISDN_STAT_DHUP\n"); 2216#endif 2217 isdn_tty_modem_hup(info, 0); 2218 return 1; 2219 } 2220 break; 2221 case ISDN_STAT_BCONN: 2222#ifdef ISDN_TTY_STAT_DEBUG 2223 printk(KERN_DEBUG "tty_STAT_BCONN ttyI%d\n", info->line); 2224#endif 2225 /* Wake up any processes waiting 2226 * for incoming call of this device when 2227 * DCD follow the state of incoming carrier 2228 */ 2229 if (info->blocked_open && 2230 (info->emu.mdmreg[REG_DCD] & BIT_DCD)) { 2231 wake_up_interruptible(&info->open_wait); 2232 } 2233 2234 /* Schedule CONNECT-Message to any tty 2235 * waiting for it and 2236 * set DCD-bit of its modem-status. 2237 */ 2238 if (TTY_IS_ACTIVE(info) || 2239 (info->blocked_open && (info->emu.mdmreg[REG_DCD] & BIT_DCD))) { 2240 info->msr |= UART_MSR_DCD; 2241 info->emu.charge = 0; 2242 if (info->dialing & 0xf) 2243 info->last_dir = 1; 2244 else 2245 info->last_dir = 0; 2246 info->dialing = 0; 2247 info->rcvsched = 1; 2248 if (USG_MODEM(dev->usage[i])) { 2249 if (info->emu.mdmreg[REG_L2PROT] == ISDN_PROTO_L2_MODEM) { 2250 strcpy(info->emu.connmsg, c->parm.num); 2251 isdn_tty_modem_result(RESULT_CONNECT, info); 2252 } else 2253 isdn_tty_modem_result(RESULT_CONNECT64000, info); 2254 } 2255 if (USG_VOICE(dev->usage[i])) 2256 isdn_tty_modem_result(RESULT_VCON, info); 2257 return 1; 2258 } 2259 break; 2260 case ISDN_STAT_BHUP: 2261#ifdef ISDN_TTY_STAT_DEBUG 2262 printk(KERN_DEBUG "tty_STAT_BHUP ttyI%d\n", info->line); 2263#endif 2264 if (TTY_IS_ACTIVE(info)) { 2265#ifdef ISDN_DEBUG_MODEM_HUP 2266 printk(KERN_DEBUG "Mhup in ISDN_STAT_BHUP\n"); 2267#endif 2268 isdn_tty_modem_hup(info, 0); 2269 return 1; 2270 } 2271 break; 2272 case ISDN_STAT_NODCH: 2273#ifdef ISDN_TTY_STAT_DEBUG 2274 printk(KERN_DEBUG "tty_STAT_NODCH ttyI%d\n", info->line); 2275#endif 2276 if (TTY_IS_ACTIVE(info)) { 2277 if (info->dialing) { 2278 info->dialing = 0; 2279 info->last_l2 = -1; 2280 info->last_si = 0; 2281 sprintf(info->last_cause, "0000"); 2282 isdn_tty_modem_result(RESULT_NO_DIALTONE, info); 2283 } 2284 isdn_tty_modem_hup(info, 0); 2285 return 1; 2286 } 2287 break; 2288 case ISDN_STAT_UNLOAD: 2289#ifdef ISDN_TTY_STAT_DEBUG 2290 printk(KERN_DEBUG "tty_STAT_UNLOAD ttyI%d\n", info->line); 2291#endif 2292 for (i = 0; i < ISDN_MAX_CHANNELS; i++) { 2293 info = &dev->mdm.info[i]; 2294 if (info->isdn_driver == c->driver) { 2295 if (info->online) 2296 isdn_tty_modem_hup(info, 1); 2297 } 2298 } 2299 return 1; 2300#ifdef CONFIG_ISDN_TTY_FAX 2301 case ISDN_STAT_FAXIND: 2302 if (TTY_IS_ACTIVE(info)) { 2303 isdn_tty_fax_command(info, c); 2304 } 2305 break; 2306#endif 2307#ifdef CONFIG_ISDN_AUDIO 2308 case ISDN_STAT_AUDIO: 2309 if (TTY_IS_ACTIVE(info)) { 2310 switch(c->parm.num[0]) { 2311 case ISDN_AUDIO_DTMF: 2312 if (info->vonline) { 2313 isdn_audio_put_dle_code(info, 2314 c->parm.num[1]); 2315 } 2316 break; 2317 } 2318 } 2319 break; 2320#endif 2321 } 2322 } 2323 return 0; 2324} 2325 2326/********************************************************************* 2327 Modem-Emulator-Routines 2328 *********************************************************************/ 2329 2330#define cmdchar(c) ((c>=' ')&&(c<=0x7f)) 2331 2332/* 2333 * Put a message from the AT-emulator into receive-buffer of tty, 2334 * convert CR, LF, and BS to values in modem-registers 3, 4 and 5. 2335 */ 2336void 2337isdn_tty_at_cout(char *msg, modem_info * info) 2338{ 2339 struct tty_struct *tty; 2340 atemu *m = &info->emu; 2341 char *p; 2342 char c; 2343 u_long flags; 2344 struct sk_buff *skb = NULL; 2345 char *sp = NULL; 2346 int l; 2347 2348 if (!msg) { 2349 printk(KERN_WARNING "isdn_tty: Null-Message in isdn_tty_at_cout\n"); 2350 return; 2351 } 2352 2353 l = strlen(msg); 2354 2355 spin_lock_irqsave(&info->readlock, flags); 2356 tty = info->tty; 2357 if ((info->flags & ISDN_ASYNC_CLOSING) || (!tty)) { 2358 spin_unlock_irqrestore(&info->readlock, flags); 2359 return; 2360 } 2361 2362 /* use queue instead of direct, if online and */ 2363 /* data is in queue or buffer is full */ 2364 if (info->online && ((tty_buffer_request_room(tty, l) < l) || 2365 !skb_queue_empty(&dev->drv[info->isdn_driver]->rpqueue[info->isdn_channel]))) { 2366 skb = alloc_skb(l, GFP_ATOMIC); 2367 if (!skb) { 2368 spin_unlock_irqrestore(&info->readlock, flags); 2369 return; 2370 } 2371 sp = skb_put(skb, l); 2372#ifdef CONFIG_ISDN_AUDIO 2373 ISDN_AUDIO_SKB_DLECOUNT(skb) = 0; 2374 ISDN_AUDIO_SKB_LOCK(skb) = 0; 2375#endif 2376 } 2377 2378 for (p = msg; *p; p++) { 2379 switch (*p) { 2380 case '\r': 2381 c = m->mdmreg[REG_CR]; 2382 break; 2383 case '\n': 2384 c = m->mdmreg[REG_LF]; 2385 break; 2386 case '\b': 2387 c = m->mdmreg[REG_BS]; 2388 break; 2389 default: 2390 c = *p; 2391 } 2392 if (skb) { 2393 *sp++ = c; 2394 } else { 2395 if(tty_insert_flip_char(tty, c, TTY_NORMAL) == 0) 2396 break; 2397 } 2398 } 2399 if (skb) { 2400 __skb_queue_tail(&dev->drv[info->isdn_driver]->rpqueue[info->isdn_channel], skb); 2401 dev->drv[info->isdn_driver]->rcvcount[info->isdn_channel] += skb->len; 2402 spin_unlock_irqrestore(&info->readlock, flags); 2403 /* Schedule dequeuing */ 2404 if (dev->modempoll && info->rcvsched) 2405 isdn_timer_ctrl(ISDN_TIMER_MODEMREAD, 1); 2406 2407 } else { 2408 spin_unlock_irqrestore(&info->readlock, flags); 2409 tty_flip_buffer_push(tty); 2410 } 2411} 2412 2413/* 2414 * Perform ATH Hangup 2415 */ 2416static void 2417isdn_tty_on_hook(modem_info * info) 2418{ 2419 if (info->isdn_channel >= 0) { 2420#ifdef ISDN_DEBUG_MODEM_HUP 2421 printk(KERN_DEBUG "Mhup in isdn_tty_on_hook\n"); 2422#endif 2423 isdn_tty_modem_hup(info, 1); 2424 } 2425} 2426 2427static void 2428isdn_tty_off_hook(void) 2429{ 2430 printk(KERN_DEBUG "isdn_tty_off_hook\n"); 2431} 2432 2433#define PLUSWAIT1 (HZ/2) /* 0.5 sec. */ 2434#define PLUSWAIT2 (HZ*3/2) /* 1.5 sec */ 2435 2436/* 2437 * Check Buffer for Modem-escape-sequence, activate timer-callback to 2438 * isdn_tty_modem_escape() if sequence found. 2439 * 2440 * Parameters: 2441 * p pointer to databuffer 2442 * plus escape-character 2443 * count length of buffer 2444 * pluscount count of valid escape-characters so far 2445 * lastplus timestamp of last character 2446 */ 2447static void 2448isdn_tty_check_esc(const u_char * p, u_char plus, int count, int *pluscount, 2449 u_long *lastplus) 2450{ 2451 if (plus > 127) 2452 return; 2453 if (count > 3) { 2454 p += count - 3; 2455 count = 3; 2456 *pluscount = 0; 2457 } 2458 while (count > 0) { 2459 if (*(p++) == plus) { 2460 if ((*pluscount)++) { 2461 /* Time since last '+' > 0.5 sec. ? */ 2462 if (time_after(jiffies, *lastplus + PLUSWAIT1)) 2463 *pluscount = 1; 2464 } else { 2465 /* Time since last non-'+' < 1.5 sec. ? */ 2466 if (time_before(jiffies, *lastplus + PLUSWAIT2)) 2467 *pluscount = 0; 2468 } 2469 if ((*pluscount == 3) && (count == 1)) 2470 isdn_timer_ctrl(ISDN_TIMER_MODEMPLUS, 1); 2471 if (*pluscount > 3) 2472 *pluscount = 1; 2473 } else 2474 *pluscount = 0; 2475 *lastplus = jiffies; 2476 count--; 2477 } 2478} 2479 2480/* 2481 * Return result of AT-emulator to tty-receive-buffer, depending on 2482 * modem-register 12, bit 0 and 1. 2483 * For CONNECT-messages also switch to online-mode. 2484 * For RING-message handle auto-ATA if register 0 != 0 2485 */ 2486 2487static void 2488isdn_tty_modem_result(int code, modem_info * info) 2489{ 2490 atemu *m = &info->emu; 2491 static char *msg[] = 2492 {"OK", "CONNECT", "RING", "NO CARRIER", "ERROR", 2493 "CONNECT 64000", "NO DIALTONE", "BUSY", "NO ANSWER", 2494 "RINGING", "NO MSN/EAZ", "VCON", "RUNG"}; 2495 char s[ISDN_MSNLEN+10]; 2496 2497 switch (code) { 2498 case RESULT_RING: 2499 m->mdmreg[REG_RINGCNT]++; 2500 if (m->mdmreg[REG_RINGCNT] == m->mdmreg[REG_RINGATA]) 2501 /* Automatically accept incoming call */ 2502 isdn_tty_cmd_ATA(info); 2503 break; 2504 case RESULT_NO_CARRIER: 2505#ifdef ISDN_DEBUG_MODEM_HUP 2506 printk(KERN_DEBUG "modem_result: NO CARRIER %d %d\n", 2507 (info->flags & ISDN_ASYNC_CLOSING), 2508 (!info->tty)); 2509#endif 2510 m->mdmreg[REG_RINGCNT] = 0; 2511 del_timer(&info->nc_timer); 2512 info->ncarrier = 0; 2513 if ((info->flags & ISDN_ASYNC_CLOSING) || (!info->tty)) { 2514 return; 2515 } 2516#ifdef CONFIG_ISDN_AUDIO 2517 if (info->vonline & 1) { 2518#ifdef ISDN_DEBUG_MODEM_VOICE 2519 printk(KERN_DEBUG "res3: send DLE-ETX on ttyI%d\n", 2520 info->line); 2521#endif 2522 /* voice-recording, add DLE-ETX */ 2523 isdn_tty_at_cout("\020\003", info); 2524 } 2525 if (info->vonline & 2) { 2526#ifdef ISDN_DEBUG_MODEM_VOICE 2527 printk(KERN_DEBUG "res3: send DLE-DC4 on ttyI%d\n", 2528 info->line); 2529#endif 2530 /* voice-playing, add DLE-DC4 */ 2531 isdn_tty_at_cout("\020\024", info); 2532 } 2533#endif 2534 break; 2535 case RESULT_CONNECT: 2536 case RESULT_CONNECT64000: 2537 sprintf(info->last_cause, "0000"); 2538 if (!info->online) 2539 info->online = 2; 2540 break; 2541 case RESULT_VCON: 2542#ifdef ISDN_DEBUG_MODEM_VOICE 2543 printk(KERN_DEBUG "res3: send VCON on ttyI%d\n", 2544 info->line); 2545#endif 2546 sprintf(info->last_cause, "0000"); 2547 if (!info->online) 2548 info->online = 1; 2549 break; 2550 } /* switch(code) */ 2551 2552 if (m->mdmreg[REG_RESP] & BIT_RESP) { 2553 /* Show results */ 2554 if (m->mdmreg[REG_RESPNUM] & BIT_RESPNUM) { 2555 /* Show numeric results only */ 2556 sprintf(s, "\r\n%d\r\n", code); 2557 isdn_tty_at_cout(s, info); 2558 } else { 2559 if (code == RESULT_RING) { 2560 /* return if "show RUNG" and ringcounter>1 */ 2561 if ((m->mdmreg[REG_RUNG] & BIT_RUNG) && 2562 (m->mdmreg[REG_RINGCNT] > 1)) 2563 return; 2564 /* print CID, _before_ _every_ ring */ 2565 if (!(m->mdmreg[REG_CIDONCE] & BIT_CIDONCE)) { 2566 isdn_tty_at_cout("\r\nCALLER NUMBER: ", info); 2567 isdn_tty_at_cout(dev->num[info->drv_index], info); 2568 if (m->mdmreg[REG_CDN] & BIT_CDN) { 2569 isdn_tty_at_cout("\r\nCALLED NUMBER: ", info); 2570 isdn_tty_at_cout(info->emu.cpn, info); 2571 } 2572 } 2573 } 2574 isdn_tty_at_cout("\r\n", info); 2575 isdn_tty_at_cout(msg[code], info); 2576 switch (code) { 2577 case RESULT_CONNECT: 2578 switch (m->mdmreg[REG_L2PROT]) { 2579 case ISDN_PROTO_L2_MODEM: 2580 isdn_tty_at_cout(" ", info); 2581 isdn_tty_at_cout(m->connmsg, info); 2582 break; 2583 } 2584 break; 2585 case RESULT_RING: 2586 /* Append CPN, if enabled */ 2587 if ((m->mdmreg[REG_CPN] & BIT_CPN)) { 2588 sprintf(s, "/%s", m->cpn); 2589 isdn_tty_at_cout(s, info); 2590 } 2591 /* Print CID only once, _after_ 1st RING */ 2592 if ((m->mdmreg[REG_CIDONCE] & BIT_CIDONCE) && 2593 (m->mdmreg[REG_RINGCNT] == 1)) { 2594 isdn_tty_at_cout("\r\n", info); 2595 isdn_tty_at_cout("CALLER NUMBER: ", info); 2596 isdn_tty_at_cout(dev->num[info->drv_index], info); 2597 if (m->mdmreg[REG_CDN] & BIT_CDN) { 2598 isdn_tty_at_cout("\r\nCALLED NUMBER: ", info); 2599 isdn_tty_at_cout(info->emu.cpn, info); 2600 } 2601 } 2602 break; 2603 case RESULT_NO_CARRIER: 2604 case RESULT_NO_DIALTONE: 2605 case RESULT_BUSY: 2606 case RESULT_NO_ANSWER: 2607 m->mdmreg[REG_RINGCNT] = 0; 2608 /* Append Cause-Message if enabled */ 2609 if (m->mdmreg[REG_RESPXT] & BIT_RESPXT) { 2610 sprintf(s, "/%s", info->last_cause); 2611 isdn_tty_at_cout(s, info); 2612 } 2613 break; 2614 case RESULT_CONNECT64000: 2615 /* Append Protocol to CONNECT message */ 2616 switch (m->mdmreg[REG_L2PROT]) { 2617 case ISDN_PROTO_L2_X75I: 2618 case ISDN_PROTO_L2_X75UI: 2619 case ISDN_PROTO_L2_X75BUI: 2620 isdn_tty_at_cout("/X.75", info); 2621 break; 2622 case ISDN_PROTO_L2_HDLC: 2623 isdn_tty_at_cout("/HDLC", info); 2624 break; 2625 case ISDN_PROTO_L2_V11096: 2626 isdn_tty_at_cout("/V110/9600", info); 2627 break; 2628 case ISDN_PROTO_L2_V11019: 2629 isdn_tty_at_cout("/V110/19200", info); 2630 break; 2631 case ISDN_PROTO_L2_V11038: 2632 isdn_tty_at_cout("/V110/38400", info); 2633 break; 2634 } 2635 if (m->mdmreg[REG_T70] & BIT_T70) { 2636 isdn_tty_at_cout("/T.70", info); 2637 if (m->mdmreg[REG_T70] & BIT_T70_EXT) 2638 isdn_tty_at_cout("+", info); 2639 } 2640 break; 2641 } 2642 isdn_tty_at_cout("\r\n", info); 2643 } 2644 } 2645 if (code == RESULT_NO_CARRIER) { 2646 if ((info->flags & ISDN_ASYNC_CLOSING) || (!info->tty)) { 2647 return; 2648 } 2649 tty_ldisc_flush(info->tty); 2650 if ((info->flags & ISDN_ASYNC_CHECK_CD) && 2651 (!((info->flags & ISDN_ASYNC_CALLOUT_ACTIVE) && 2652 (info->flags & ISDN_ASYNC_CALLOUT_NOHUP)))) { 2653 tty_hangup(info->tty); 2654 } 2655 } 2656} 2657 2658 2659/* 2660 * Display a modem-register-value. 2661 */ 2662static void 2663isdn_tty_show_profile(int ridx, modem_info * info) 2664{ 2665 char v[6]; 2666 2667 sprintf(v, "\r\n%d", info->emu.mdmreg[ridx]); 2668 isdn_tty_at_cout(v, info); 2669} 2670 2671/* 2672 * Get MSN-string from char-pointer, set pointer to end of number 2673 */ 2674static void 2675isdn_tty_get_msnstr(char *n, char **p) 2676{ 2677 int limit = ISDN_MSNLEN - 1; 2678 2679 while (((*p[0] >= '0' && *p[0] <= '9') || 2680 /* Why a comma ??? */ 2681 (*p[0] == ',') || (*p[0] == ':')) && 2682 (limit--)) 2683 *n++ = *p[0]++; 2684 *n = '\0'; 2685} 2686 2687/* 2688 * Get phone-number from modem-commandbuffer 2689 */ 2690static void 2691isdn_tty_getdial(char *p, char *q,int cnt) 2692{ 2693 int first = 1; 2694 int limit = ISDN_MSNLEN - 1; /* MUST match the size of interface var to avoid 2695 buffer overflow */ 2696 2697 while (strchr(" 0123456789,#.*WPTS-", *p) && *p && --cnt>0) { 2698 if ((*p >= '0' && *p <= '9') || ((*p == 'S') && first) || 2699 (*p == '*') || (*p == '#')) { 2700 *q++ = *p; 2701 limit--; 2702 } 2703 if(!limit) 2704 break; 2705 p++; 2706 first = 0; 2707 } 2708 *q = 0; 2709} 2710 2711#define PARSE_ERROR { isdn_tty_modem_result(RESULT_ERROR, info); return; } 2712#define PARSE_ERROR1 { isdn_tty_modem_result(RESULT_ERROR, info); return 1; } 2713 2714static void 2715isdn_tty_report(modem_info * info) 2716{ 2717 atemu *m = &info->emu; 2718 char s[80]; 2719 2720 isdn_tty_at_cout("\r\nStatistics of last connection:\r\n\r\n", info); 2721 sprintf(s, " Remote Number: %s\r\n", info->last_num); 2722 isdn_tty_at_cout(s, info); 2723 sprintf(s, " Direction: %s\r\n", info->last_dir ? "outgoing" : "incoming"); 2724 isdn_tty_at_cout(s, info); 2725 isdn_tty_at_cout(" Layer-2 Protocol: ", info); 2726 switch (info->last_l2) { 2727 case ISDN_PROTO_L2_X75I: 2728 isdn_tty_at_cout("X.75i", info); 2729 break; 2730 case ISDN_PROTO_L2_X75UI: 2731 isdn_tty_at_cout("X.75ui", info); 2732 break; 2733 case ISDN_PROTO_L2_X75BUI: 2734 isdn_tty_at_cout("X.75bui", info); 2735 break; 2736 case ISDN_PROTO_L2_HDLC: 2737 isdn_tty_at_cout("HDLC", info); 2738 break; 2739 case ISDN_PROTO_L2_V11096: 2740 isdn_tty_at_cout("V.110 9600 Baud", info); 2741 break; 2742 case ISDN_PROTO_L2_V11019: 2743 isdn_tty_at_cout("V.110 19200 Baud", info); 2744 break; 2745 case ISDN_PROTO_L2_V11038: 2746 isdn_tty_at_cout("V.110 38400 Baud", info); 2747 break; 2748 case ISDN_PROTO_L2_TRANS: 2749 isdn_tty_at_cout("transparent", info); 2750 break; 2751 case ISDN_PROTO_L2_MODEM: 2752 isdn_tty_at_cout("modem", info); 2753 break; 2754 case ISDN_PROTO_L2_FAX: 2755 isdn_tty_at_cout("fax", info); 2756 break; 2757 default: 2758 isdn_tty_at_cout("unknown", info); 2759 break; 2760 } 2761 if (m->mdmreg[REG_T70] & BIT_T70) { 2762 isdn_tty_at_cout("/T.70", info); 2763 if (m->mdmreg[REG_T70] & BIT_T70_EXT) 2764 isdn_tty_at_cout("+", info); 2765 } 2766 isdn_tty_at_cout("\r\n", info); 2767 isdn_tty_at_cout(" Service: ", info); 2768 switch (info->last_si) { 2769 case 1: 2770 isdn_tty_at_cout("audio\r\n", info); 2771 break; 2772 case 5: 2773 isdn_tty_at_cout("btx\r\n", info); 2774 break; 2775 case 7: 2776 isdn_tty_at_cout("data\r\n", info); 2777 break; 2778 default: 2779 sprintf(s, "%d\r\n", info->last_si); 2780 isdn_tty_at_cout(s, info); 2781 break; 2782 } 2783 sprintf(s, " Hangup location: %s\r\n", info->last_lhup ? "local" : "remote"); 2784 isdn_tty_at_cout(s, info); 2785 sprintf(s, " Last cause: %s\r\n", info->last_cause); 2786 isdn_tty_at_cout(s, info); 2787} 2788 2789/* 2790 * Parse AT&.. commands. 2791 */ 2792static int 2793isdn_tty_cmd_ATand(char **p, modem_info * info) 2794{ 2795 atemu *m = &info->emu; 2796 int i; 2797 char rb[100]; 2798 2799#define MAXRB (sizeof(rb) - 1) 2800 2801 switch (*p[0]) { 2802 case 'B': 2803 /* &B - Set Buffersize */ 2804 p[0]++; 2805 i = isdn_getnum(p); 2806 if ((i < 0) || (i > ISDN_SERIAL_XMIT_MAX)) 2807 PARSE_ERROR1; 2808#ifdef CONFIG_ISDN_AUDIO 2809 if ((m->mdmreg[REG_SI1] & 1) && (i > VBUF)) 2810 PARSE_ERROR1; 2811#endif 2812 m->mdmreg[REG_PSIZE] = i / 16; 2813 info->xmit_size = m->mdmreg[REG_PSIZE] * 16; 2814 switch (m->mdmreg[REG_L2PROT]) { 2815 case ISDN_PROTO_L2_V11096: 2816 case ISDN_PROTO_L2_V11019: 2817 case ISDN_PROTO_L2_V11038: 2818 info->xmit_size /= 10; 2819 } 2820 break; 2821 case 'C': 2822 /* &C - DCD Status */ 2823 p[0]++; 2824 switch (isdn_getnum(p)) { 2825 case 0: 2826 m->mdmreg[REG_DCD] &= ~BIT_DCD; 2827 break; 2828 case 1: 2829 m->mdmreg[REG_DCD] |= BIT_DCD; 2830 break; 2831 default: 2832 PARSE_ERROR1 2833 } 2834 break; 2835 case 'D': 2836 /* &D - Set DTR-Low-behavior */ 2837 p[0]++; 2838 switch (isdn_getnum(p)) { 2839 case 0: 2840 m->mdmreg[REG_DTRHUP] &= ~BIT_DTRHUP; 2841 m->mdmreg[REG_DTRR] &= ~BIT_DTRR; 2842 break; 2843 case 2: 2844 m->mdmreg[REG_DTRHUP] |= BIT_DTRHUP; 2845 m->mdmreg[REG_DTRR] &= ~BIT_DTRR; 2846 break; 2847 case 3: 2848 m->mdmreg[REG_DTRHUP] |= BIT_DTRHUP; 2849 m->mdmreg[REG_DTRR] |= BIT_DTRR; 2850 break; 2851 default: 2852 PARSE_ERROR1 2853 } 2854 break; 2855 case 'E': 2856 /* &E -Set EAZ/MSN */ 2857 p[0]++; 2858 isdn_tty_get_msnstr(m->msn, p); 2859 break; 2860 case 'F': 2861 /* &F -Set Factory-Defaults */ 2862 p[0]++; 2863 if (info->msr & UART_MSR_DCD) 2864 PARSE_ERROR1; 2865 isdn_tty_reset_profile(m); 2866 isdn_tty_modem_reset_regs(info, 1); 2867 break; 2868#ifdef DUMMY_HAYES_AT 2869 case 'K': 2870 /* only for be compilant with common scripts */ 2871 /* &K Flowcontrol - no function */ 2872 p[0]++; 2873 isdn_getnum(p); 2874 break; 2875#endif 2876 case 'L': 2877 /* &L -Set Numbers to listen on */ 2878 p[0]++; 2879 i = 0; 2880 while (*p[0] && (strchr("0123456789,-*[]?;", *p[0])) && 2881 (i < ISDN_LMSNLEN - 1)) 2882 m->lmsn[i++] = *p[0]++; 2883 m->lmsn[i] = '\0'; 2884 break; 2885 case 'R': 2886 /* &R - Set V.110 bitrate adaption */ 2887 p[0]++; 2888 i = isdn_getnum(p); 2889 switch (i) { 2890 case 0: 2891 /* Switch off V.110, back to X.75 */ 2892 m->mdmreg[REG_L2PROT] = ISDN_PROTO_L2_X75I; 2893 m->mdmreg[REG_SI2] = 0; 2894 info->xmit_size = m->mdmreg[REG_PSIZE] * 16; 2895 break; 2896 case 9600: 2897 m->mdmreg[REG_L2PROT] = ISDN_PROTO_L2_V11096; 2898 m->mdmreg[REG_SI2] = 197; 2899 info->xmit_size = m->mdmreg[REG_PSIZE] * 16 / 10; 2900 break; 2901 case 19200: 2902 m->mdmreg[REG_L2PROT] = ISDN_PROTO_L2_V11019; 2903 m->mdmreg[REG_SI2] = 199; 2904 info->xmit_size = m->mdmreg[REG_PSIZE] * 16 / 10; 2905 break; 2906 case 38400: 2907 m->mdmreg[REG_L2PROT] = ISDN_PROTO_L2_V11038; 2908 m->mdmreg[REG_SI2] = 198; /* no existing standard for this */ 2909 info->xmit_size = m->mdmreg[REG_PSIZE] * 16 / 10; 2910 break; 2911 default: 2912 PARSE_ERROR1; 2913 } 2914 /* Switch off T.70 */ 2915 m->mdmreg[REG_T70] &= ~(BIT_T70 | BIT_T70_EXT); 2916 /* Set Service 7 */ 2917 m->mdmreg[REG_SI1] |= 4; 2918 break; 2919 case 'S': 2920 /* &S - Set Windowsize */ 2921 p[0]++; 2922 i = isdn_getnum(p); 2923 if ((i > 0) && (i < 9)) 2924 m->mdmreg[REG_WSIZE] = i; 2925 else 2926 PARSE_ERROR1; 2927 break; 2928 case 'V': 2929 /* &V - Show registers */ 2930 p[0]++; 2931 isdn_tty_at_cout("\r\n", info); 2932 for (i = 0; i < ISDN_MODEM_NUMREG; i++) { 2933 sprintf(rb, "S%02d=%03d%s", i, 2934 m->mdmreg[i], ((i + 1) % 10) ? " " : "\r\n"); 2935 isdn_tty_at_cout(rb, info); 2936 } 2937 sprintf(rb, "\r\nEAZ/MSN: %.50s\r\n", 2938 strlen(m->msn) ? m->msn : "None"); 2939 isdn_tty_at_cout(rb, info); 2940 if (strlen(m->lmsn)) { 2941 isdn_tty_at_cout("\r\nListen: ", info); 2942 isdn_tty_at_cout(m->lmsn, info); 2943 isdn_tty_at_cout("\r\n", info); 2944 } 2945 break; 2946 case 'W': 2947 /* &W - Write Profile */ 2948 p[0]++; 2949 switch (*p[0]) { 2950 case '0': 2951 p[0]++; 2952 modem_write_profile(m); 2953 break; 2954 default: 2955 PARSE_ERROR1; 2956 } 2957 break; 2958 case 'X': 2959 /* &X - Switch to BTX-Mode and T.70 */ 2960 p[0]++; 2961 switch (isdn_getnum(p)) { 2962 case 0: 2963 m->mdmreg[REG_T70] &= ~(BIT_T70 | BIT_T70_EXT); 2964 info->xmit_size = m->mdmreg[REG_PSIZE] * 16; 2965 break; 2966 case 1: 2967 m->mdmreg[REG_T70] |= BIT_T70; 2968 m->mdmreg[REG_T70] &= ~BIT_T70_EXT; 2969 m->mdmreg[REG_L2PROT] = ISDN_PROTO_L2_X75I; 2970 info->xmit_size = 112; 2971 m->mdmreg[REG_SI1] = 4; 2972 m->mdmreg[REG_SI2] = 0; 2973 break; 2974 case 2: 2975 m->mdmreg[REG_T70] |= (BIT_T70 | BIT_T70_EXT); 2976 m->mdmreg[REG_L2PROT] = ISDN_PROTO_L2_X75I; 2977 info->xmit_size = 112; 2978 m->mdmreg[REG_SI1] = 4; 2979 m->mdmreg[REG_SI2] = 0; 2980 break; 2981 default: 2982 PARSE_ERROR1; 2983 } 2984 break; 2985 default: 2986 PARSE_ERROR1; 2987 } 2988 return 0; 2989} 2990 2991static int 2992isdn_tty_check_ats(int mreg, int mval, modem_info * info, atemu * m) 2993{ 2994 /* Some plausibility checks */ 2995 switch (mreg) { 2996 case REG_L2PROT: 2997 if (mval > ISDN_PROTO_L2_MAX) 2998 return 1; 2999 break; 3000 case REG_PSIZE: 3001 if ((mval * 16) > ISDN_SERIAL_XMIT_MAX) 3002 return 1; 3003#ifdef CONFIG_ISDN_AUDIO 3004 if ((m->mdmreg[REG_SI1] & 1) && (mval > VBUFX)) 3005 return 1; 3006#endif 3007 info->xmit_size = mval * 16; 3008 switch (m->mdmreg[REG_L2PROT]) { 3009 case ISDN_PROTO_L2_V11096: 3010 case ISDN_PROTO_L2_V11019: 3011 case ISDN_PROTO_L2_V11038: 3012 info->xmit_size /= 10; 3013 } 3014 break; 3015 case REG_SI1I: 3016 case REG_PLAN: 3017 case REG_SCREEN: 3018 /* readonly registers */ 3019 return 1; 3020 } 3021 return 0; 3022} 3023 3024/* 3025 * Perform ATS command 3026 */ 3027static int 3028isdn_tty_cmd_ATS(char **p, modem_info * info) 3029{ 3030 atemu *m = &info->emu; 3031 int bitpos; 3032 int mreg; 3033 int mval; 3034 int bval; 3035 3036 mreg = isdn_getnum(p); 3037 if (mreg < 0 || mreg >= ISDN_MODEM_NUMREG) 3038 PARSE_ERROR1; 3039 switch (*p[0]) { 3040 case '=': 3041 p[0]++; 3042 mval = isdn_getnum(p); 3043 if (mval < 0 || mval > 255) 3044 PARSE_ERROR1; 3045 if (isdn_tty_check_ats(mreg, mval, info, m)) 3046 PARSE_ERROR1; 3047 m->mdmreg[mreg] = mval; 3048 break; 3049 case '.': 3050 /* Set/Clear a single bit */ 3051 p[0]++; 3052 bitpos = isdn_getnum(p); 3053 if ((bitpos < 0) || (bitpos > 7)) 3054 PARSE_ERROR1; 3055 switch (*p[0]) { 3056 case '=': 3057 p[0]++; 3058 bval = isdn_getnum(p); 3059 if (bval < 0 || bval > 1) 3060 PARSE_ERROR1; 3061 if (bval) 3062 mval = m->mdmreg[mreg] | (1 << bitpos); 3063 else 3064 mval = m->mdmreg[mreg] & ~(1 << bitpos); 3065 if (isdn_tty_check_ats(mreg, mval, info, m)) 3066 PARSE_ERROR1; 3067 m->mdmreg[mreg] = mval; 3068 break; 3069 case '?': 3070 p[0]++; 3071 isdn_tty_at_cout("\r\n", info); 3072 isdn_tty_at_cout((m->mdmreg[mreg] & (1 << bitpos)) ? "1" : "0", 3073 info); 3074 break; 3075 default: 3076 PARSE_ERROR1; 3077 } 3078 break; 3079 case '?': 3080 p[0]++; 3081 isdn_tty_show_profile(mreg, info); 3082 break; 3083 default: 3084 PARSE_ERROR1; 3085 break; 3086 } 3087 return 0; 3088} 3089 3090/* 3091 * Perform ATA command 3092 */ 3093static void 3094isdn_tty_cmd_ATA(modem_info * info) 3095{ 3096 atemu *m = &info->emu; 3097 isdn_ctrl cmd; 3098 int l2; 3099 3100 if (info->msr & UART_MSR_RI) { 3101 /* Accept incoming call */ 3102 info->last_dir = 0; 3103 strcpy(info->last_num, dev->num[info->drv_index]); 3104 m->mdmreg[REG_RINGCNT] = 0; 3105 info->msr &= ~UART_MSR_RI; 3106 l2 = m->mdmreg[REG_L2PROT]; 3107#ifdef CONFIG_ISDN_AUDIO 3108 /* If more than one bit set in reg18, autoselect Layer2 */ 3109 if ((m->mdmreg[REG_SI1] & m->mdmreg[REG_SI1I]) != m->mdmreg[REG_SI1]) { 3110 if (m->mdmreg[REG_SI1I] == 1) { 3111 if ((l2 != ISDN_PROTO_L2_MODEM) && (l2 != ISDN_PROTO_L2_FAX)) 3112 l2 = ISDN_PROTO_L2_TRANS; 3113 } else 3114 l2 = ISDN_PROTO_L2_X75I; 3115 } 3116#endif 3117 cmd.driver = info->isdn_driver; 3118 cmd.command = ISDN_CMD_SETL2; 3119 cmd.arg = info->isdn_channel + (l2 << 8); 3120 info->last_l2 = l2; 3121 isdn_command(&cmd); 3122 cmd.driver = info->isdn_driver; 3123 cmd.command = ISDN_CMD_SETL3; 3124 cmd.arg = info->isdn_channel + (m->mdmreg[REG_L3PROT] << 8); 3125#ifdef CONFIG_ISDN_TTY_FAX 3126 if (l2 == ISDN_PROTO_L2_FAX) { 3127 cmd.parm.fax = info->fax; 3128 info->fax->direction = ISDN_TTY_FAX_CONN_IN; 3129 } 3130#endif 3131 isdn_command(&cmd); 3132 cmd.driver = info->isdn_driver; 3133 cmd.arg = info->isdn_channel; 3134 cmd.command = ISDN_CMD_ACCEPTD; 3135 info->dialing = 16; 3136 info->emu.carrierwait = 0; 3137 isdn_command(&cmd); 3138 isdn_timer_ctrl(ISDN_TIMER_CARRIER, 1); 3139 } else 3140 isdn_tty_modem_result(RESULT_NO_ANSWER, info); 3141} 3142 3143#ifdef CONFIG_ISDN_AUDIO 3144/* 3145 * Parse AT+F.. commands 3146 */ 3147static int 3148isdn_tty_cmd_PLUSF(char **p, modem_info * info) 3149{ 3150 atemu *m = &info->emu; 3151 char rs[20]; 3152 3153 if (!strncmp(p[0], "CLASS", 5)) { 3154 p[0] += 5; 3155 switch (*p[0]) { 3156 case '?': 3157 p[0]++; 3158 sprintf(rs, "\r\n%d", 3159 (m->mdmreg[REG_SI1] & 1) ? 8 : 0); 3160#ifdef CONFIG_ISDN_TTY_FAX 3161 if (TTY_IS_FCLASS2(info)) 3162 sprintf(rs, "\r\n2"); 3163 else if (TTY_IS_FCLASS1(info)) 3164 sprintf(rs, "\r\n1"); 3165#endif 3166 isdn_tty_at_cout(rs, info); 3167 break; 3168 case '=': 3169 p[0]++; 3170 switch (*p[0]) { 3171 case '0': 3172 p[0]++; 3173 m->mdmreg[REG_L2PROT] = ISDN_PROTO_L2_X75I; 3174 m->mdmreg[REG_L3PROT] = ISDN_PROTO_L3_TRANS; 3175 m->mdmreg[REG_SI1] = 4; 3176 info->xmit_size = 3177 m->mdmreg[REG_PSIZE] * 16; 3178 break; 3179#ifdef CONFIG_ISDN_TTY_FAX 3180 case '1': 3181 p[0]++; 3182 if (!(dev->global_features & 3183 ISDN_FEATURE_L3_FCLASS1)) 3184 PARSE_ERROR1; 3185 m->mdmreg[REG_SI1] = 1; 3186 m->mdmreg[REG_L2PROT] = ISDN_PROTO_L2_FAX; 3187 m->mdmreg[REG_L3PROT] = ISDN_PROTO_L3_FCLASS1; 3188 info->xmit_size = 3189 m->mdmreg[REG_PSIZE] * 16; 3190 break; 3191 case '2': 3192 p[0]++; 3193 if (!(dev->global_features & 3194 ISDN_FEATURE_L3_FCLASS2)) 3195 PARSE_ERROR1; 3196 m->mdmreg[REG_SI1] = 1; 3197 m->mdmreg[REG_L2PROT] = ISDN_PROTO_L2_FAX; 3198 m->mdmreg[REG_L3PROT] = ISDN_PROTO_L3_FCLASS2; 3199 info->xmit_size = 3200 m->mdmreg[REG_PSIZE] * 16; 3201 break; 3202#endif 3203 case '8': 3204 p[0]++; 3205 /* L2 will change on dialout with si=1 */ 3206 m->mdmreg[REG_L2PROT] = ISDN_PROTO_L2_X75I; 3207 m->mdmreg[REG_L3PROT] = ISDN_PROTO_L3_TRANS; 3208 m->mdmreg[REG_SI1] = 5; 3209 info->xmit_size = VBUF; 3210 break; 3211 case '?': 3212 p[0]++; 3213 strcpy(rs, "\r\n0,"); 3214#ifdef CONFIG_ISDN_TTY_FAX 3215 if (dev->global_features & 3216 ISDN_FEATURE_L3_FCLASS1) 3217 strcat(rs, "1,"); 3218 if (dev->global_features & 3219 ISDN_FEATURE_L3_FCLASS2) 3220 strcat(rs, "2,"); 3221#endif 3222 strcat(rs, "8"); 3223 isdn_tty_at_cout(rs, info); 3224 break; 3225 default: 3226 PARSE_ERROR1; 3227 } 3228 break; 3229 default: 3230 PARSE_ERROR1; 3231 } 3232 return 0; 3233 } 3234#ifdef CONFIG_ISDN_TTY_FAX 3235 return (isdn_tty_cmd_PLUSF_FAX(p, info)); 3236#else 3237 PARSE_ERROR1; 3238#endif 3239} 3240 3241/* 3242 * Parse AT+V.. commands 3243 */ 3244static int 3245isdn_tty_cmd_PLUSV(char **p, modem_info * info) 3246{ 3247 atemu *m = &info->emu; 3248 isdn_ctrl cmd; 3249 static char *vcmd[] = 3250 {"NH", "IP", "LS", "RX", "SD", "SM", "TX", "DD", NULL}; 3251 int i; 3252 int par1; 3253 int par2; 3254 char rs[20]; 3255 3256 i = 0; 3257 while (vcmd[i]) { 3258 if (!strncmp(vcmd[i], p[0], 2)) { 3259 p[0] += 2; 3260 break; 3261 } 3262 i++; 3263 } 3264 switch (i) { 3265 case 0: 3266 /* AT+VNH - Auto hangup feature */ 3267 switch (*p[0]) { 3268 case '?': 3269 p[0]++; 3270 isdn_tty_at_cout("\r\n1", info); 3271 break; 3272 case '=': 3273 p[0]++; 3274 switch (*p[0]) { 3275 case '1': 3276 p[0]++; 3277 break; 3278 case '?': 3279 p[0]++; 3280 isdn_tty_at_cout("\r\n1", info); 3281 break; 3282 default: 3283 PARSE_ERROR1; 3284 } 3285 break; 3286 default: 3287 PARSE_ERROR1; 3288 } 3289 break; 3290 case 1: 3291 /* AT+VIP - Reset all voice parameters */ 3292 isdn_tty_modem_reset_vpar(m); 3293 break; 3294 case 2: 3295 /* AT+VLS - Select device, accept incoming call */ 3296 switch (*p[0]) { 3297 case '?': 3298 p[0]++; 3299 sprintf(rs, "\r\n%d", m->vpar[0]); 3300 isdn_tty_at_cout(rs, info); 3301 break; 3302 case '=': 3303 p[0]++; 3304 switch (*p[0]) { 3305 case '0': 3306 p[0]++; 3307 m->vpar[0] = 0; 3308 break; 3309 case '2': 3310 p[0]++; 3311 m->vpar[0] = 2; 3312 break; 3313 case '?': 3314 p[0]++; 3315 isdn_tty_at_cout("\r\n0,2", info); 3316 break; 3317 default: 3318 PARSE_ERROR1; 3319 } 3320 break; 3321 default: 3322 PARSE_ERROR1; 3323 } 3324 break; 3325 case 3: 3326 /* AT+VRX - Start recording */ 3327 if (!m->vpar[0]) 3328 PARSE_ERROR1; 3329 if (info->online != 1) { 3330 isdn_tty_modem_result(RESULT_NO_ANSWER, info); 3331 return 1; 3332 } 3333 info->dtmf_state = isdn_audio_dtmf_init(info->dtmf_state); 3334 if (!info->dtmf_state) { 3335 printk(KERN_WARNING "isdn_tty: Couldn't malloc dtmf state\n"); 3336 PARSE_ERROR1; 3337 } 3338 info->silence_state = isdn_audio_silence_init(info->silence_state); 3339 if (!info->silence_state) { 3340 printk(KERN_WARNING "isdn_tty: Couldn't malloc silence state\n"); 3341 PARSE_ERROR1; 3342 } 3343 if (m->vpar[3] < 5) { 3344 info->adpcmr = isdn_audio_adpcm_init(info->adpcmr, m->vpar[3]); 3345 if (!info->adpcmr) { 3346 printk(KERN_WARNING "isdn_tty: Couldn't malloc adpcm state\n"); 3347 PARSE_ERROR1; 3348 } 3349 } 3350#ifdef ISDN_DEBUG_AT 3351 printk(KERN_DEBUG "AT: +VRX\n"); 3352#endif 3353 info->vonline |= 1; 3354 isdn_tty_modem_result(RESULT_CONNECT, info); 3355 return 0; 3356 break; 3357 case 4: 3358 /* AT+VSD - Silence detection */ 3359 switch (*p[0]) { 3360 case '?': 3361 p[0]++; 3362 sprintf(rs, "\r\n<%d>,<%d>", 3363 m->vpar[1], 3364 m->vpar[2]); 3365 isdn_tty_at_cout(rs, info); 3366 break; 3367 case '=': 3368 p[0]++; 3369 if ((*p[0]>='0') && (*p[0]<='9')) { 3370 par1 = isdn_getnum(p); 3371 if ((par1 < 0) || (par1 > 31)) 3372 PARSE_ERROR1; 3373 if (*p[0] != ',') 3374 PARSE_ERROR1; 3375 p[0]++; 3376 par2 = isdn_getnum(p); 3377 if ((par2 < 0) || (par2 > 255)) 3378 PARSE_ERROR1; 3379 m->vpar[1] = par1; 3380 m->vpar[2] = par2; 3381 break; 3382 } else 3383 if (*p[0] == '?') { 3384 p[0]++; 3385 isdn_tty_at_cout("\r\n<0-31>,<0-255>", 3386 info); 3387 break; 3388 } else 3389 PARSE_ERROR1; 3390 break; 3391 default: 3392 PARSE_ERROR1; 3393 } 3394 break; 3395 case 5: 3396 /* AT+VSM - Select compression */ 3397 switch (*p[0]) { 3398 case '?': 3399 p[0]++; 3400 sprintf(rs, "\r\n<%d>,<%d><8000>", 3401 m->vpar[3], 3402 m->vpar[1]); 3403 isdn_tty_at_cout(rs, info); 3404 break; 3405 case '=': 3406 p[0]++; 3407 switch (*p[0]) { 3408 case '2': 3409 case '3': 3410 case '4': 3411 case '5': 3412 case '6': 3413 par1 = isdn_getnum(p); 3414 if ((par1 < 2) || (par1 > 6)) 3415 PARSE_ERROR1; 3416 m->vpar[3] = par1; 3417 break; 3418 case '?': 3419 p[0]++; 3420 isdn_tty_at_cout("\r\n2;ADPCM;2;0;(8000)\r\n", 3421 info); 3422 isdn_tty_at_cout("3;ADPCM;3;0;(8000)\r\n", 3423 info); 3424 isdn_tty_at_cout("4;ADPCM;4;0;(8000)\r\n", 3425 info); 3426 isdn_tty_at_cout("5;ALAW;8;0;(8000)\r\n", 3427 info); 3428 isdn_tty_at_cout("6;ULAW;8;0;(8000)\r\n", 3429 info); 3430 break; 3431 default: 3432 PARSE_ERROR1; 3433 } 3434 break; 3435 default: 3436 PARSE_ERROR1; 3437 } 3438 break; 3439 case 6: 3440 /* AT+VTX - Start sending */ 3441 if (!m->vpar[0]) 3442 PARSE_ERROR1; 3443 if (info->online != 1) { 3444 isdn_tty_modem_result(RESULT_NO_ANSWER, info); 3445 return 1; 3446 } 3447 info->dtmf_state = isdn_audio_dtmf_init(info->dtmf_state); 3448 if (!info->dtmf_state) { 3449 printk(KERN_WARNING "isdn_tty: Couldn't malloc dtmf state\n"); 3450 PARSE_ERROR1; 3451 } 3452 if (m->vpar[3] < 5) { 3453 info->adpcms = isdn_audio_adpcm_init(info->adpcms, m->vpar[3]); 3454 if (!info->adpcms) { 3455 printk(KERN_WARNING "isdn_tty: Couldn't malloc adpcm state\n"); 3456 PARSE_ERROR1; 3457 } 3458 } 3459#ifdef ISDN_DEBUG_AT 3460 printk(KERN_DEBUG "AT: +VTX\n"); 3461#endif 3462 m->lastDLE = 0; 3463 info->vonline |= 2; 3464 isdn_tty_modem_result(RESULT_CONNECT, info); 3465 return 0; 3466 break; 3467 case 7: 3468 /* AT+VDD - DTMF detection */ 3469 switch (*p[0]) { 3470 case '?': 3471 p[0]++; 3472 sprintf(rs, "\r\n<%d>,<%d>", 3473 m->vpar[4], 3474 m->vpar[5]); 3475 isdn_tty_at_cout(rs, info); 3476 break; 3477 case '=': 3478 p[0]++; 3479 if ((*p[0]>='0') && (*p[0]<='9')) { 3480 if (info->online != 1) 3481 PARSE_ERROR1; 3482 par1 = isdn_getnum(p); 3483 if ((par1 < 0) || (par1 > 15)) 3484 PARSE_ERROR1; 3485 if (*p[0] != ',') 3486 PARSE_ERROR1; 3487 p[0]++; 3488 par2 = isdn_getnum(p); 3489 if ((par2 < 0) || (par2 > 255)) 3490 PARSE_ERROR1; 3491 m->vpar[4] = par1; 3492 m->vpar[5] = par2; 3493 cmd.driver = info->isdn_driver; 3494 cmd.command = ISDN_CMD_AUDIO; 3495 cmd.arg = info->isdn_channel + (ISDN_AUDIO_SETDD << 8); 3496 cmd.parm.num[0] = par1; 3497 cmd.parm.num[1] = par2; 3498 isdn_command(&cmd); 3499 break; 3500 } else 3501 if (*p[0] == '?') { 3502 p[0]++; 3503 isdn_tty_at_cout("\r\n<0-15>,<0-255>", 3504 info); 3505 break; 3506 } else 3507 PARSE_ERROR1; 3508 break; 3509 default: 3510 PARSE_ERROR1; 3511 } 3512 break; 3513 default: 3514 PARSE_ERROR1; 3515 } 3516 return 0; 3517} 3518#endif /* CONFIG_ISDN_AUDIO */ 3519 3520/* 3521 * Parse and perform an AT-command-line. 3522 */ 3523static void 3524isdn_tty_parse_at(modem_info * info) 3525{ 3526 atemu *m = &info->emu; 3527 char *p; 3528 char ds[40]; 3529 3530#ifdef ISDN_DEBUG_AT 3531 printk(KERN_DEBUG "AT: '%s'\n", m->mdmcmd); 3532#endif 3533 for (p = &m->mdmcmd[2]; *p;) { 3534 switch (*p) { 3535 case ' ': 3536 p++; 3537 break; 3538 case 'A': 3539 /* A - Accept incoming call */ 3540 p++; 3541 isdn_tty_cmd_ATA(info); 3542 return; 3543 break; 3544 case 'D': 3545 /* D - Dial */ 3546 if (info->msr & UART_MSR_DCD) 3547 PARSE_ERROR; 3548 if (info->msr & UART_MSR_RI) { 3549 isdn_tty_modem_result(RESULT_NO_CARRIER, info); 3550 return; 3551 } 3552 isdn_tty_getdial(++p, ds, sizeof ds); 3553 p += strlen(p); 3554 if (!strlen(m->msn)) 3555 isdn_tty_modem_result(RESULT_NO_MSN_EAZ, info); 3556 else if (strlen(ds)) 3557 isdn_tty_dial(ds, info, m); 3558 else 3559 PARSE_ERROR; 3560 return; 3561 case 'E': 3562 /* E - Turn Echo on/off */ 3563 p++; 3564 switch (isdn_getnum(&p)) { 3565 case 0: 3566 m->mdmreg[REG_ECHO] &= ~BIT_ECHO; 3567 break; 3568 case 1: 3569 m->mdmreg[REG_ECHO] |= BIT_ECHO; 3570 break; 3571 default: 3572 PARSE_ERROR; 3573 } 3574 break; 3575 case 'H': 3576 /* H - On/Off-hook */ 3577 p++; 3578 switch (*p) { 3579 case '0': 3580 p++; 3581 isdn_tty_on_hook(info); 3582 break; 3583 case '1': 3584 p++; 3585 isdn_tty_off_hook(); 3586 break; 3587 default: 3588 isdn_tty_on_hook(info); 3589 break; 3590 } 3591 break; 3592 case 'I': 3593 /* I - Information */ 3594 p++; 3595 isdn_tty_at_cout("\r\nLinux ISDN", info); 3596 switch (*p) { 3597 case '0': 3598 case '1': 3599 p++; 3600 break; 3601 case '2': 3602 p++; 3603 isdn_tty_report(info); 3604 break; 3605 case '3': 3606 p++; 3607 sprintf(ds, "\r\n%d", info->emu.charge); 3608 isdn_tty_at_cout(ds, info); 3609 break; 3610 default:; 3611 } 3612 break; 3613#ifdef DUMMY_HAYES_AT 3614 case 'L': 3615 case 'M': 3616 /* only for be compilant with common scripts */ 3617 /* no function */ 3618 p++; 3619 isdn_getnum(&p); 3620 break; 3621#endif 3622 case 'O': 3623 /* O - Go online */ 3624 p++; 3625 if (info->msr & UART_MSR_DCD) 3626 /* if B-Channel is up */ 3627 isdn_tty_modem_result((m->mdmreg[REG_L2PROT] == ISDN_PROTO_L2_MODEM) ? RESULT_CONNECT:RESULT_CONNECT64000, info); 3628 else 3629 isdn_tty_modem_result(RESULT_NO_CARRIER, info); 3630 return; 3631 case 'Q': 3632 /* Q - Turn Emulator messages on/off */ 3633 p++; 3634 switch (isdn_getnum(&p)) { 3635 case 0: 3636 m->mdmreg[REG_RESP] |= BIT_RESP; 3637 break; 3638 case 1: 3639 m->mdmreg[REG_RESP] &= ~BIT_RESP; 3640 break; 3641 default: 3642 PARSE_ERROR; 3643 } 3644 break; 3645 case 'S': 3646 /* S - Set/Get Register */ 3647 p++; 3648 if (isdn_tty_cmd_ATS(&p, info)) 3649 return; 3650 break; 3651 case 'V': 3652 /* V - Numeric or ASCII Emulator-messages */ 3653 p++; 3654 switch (isdn_getnum(&p)) { 3655 case 0: 3656 m->mdmreg[REG_RESP] |= BIT_RESPNUM; 3657 break; 3658 case 1: 3659 m->mdmreg[REG_RESP] &= ~BIT_RESPNUM; 3660 break; 3661 default: 3662 PARSE_ERROR; 3663 } 3664 break; 3665 case 'Z': 3666 /* Z - Load Registers from Profile */ 3667 p++; 3668 if (info->msr & UART_MSR_DCD) { 3669 info->online = 0; 3670 isdn_tty_on_hook(info); 3671 } 3672 isdn_tty_modem_reset_regs(info, 1); 3673 break; 3674 case '+': 3675 p++; 3676 switch (*p) { 3677#ifdef CONFIG_ISDN_AUDIO 3678 case 'F': 3679 p++; 3680 if (isdn_tty_cmd_PLUSF(&p, info)) 3681 return; 3682 break; 3683 case 'V': 3684 if ((!(m->mdmreg[REG_SI1] & 1)) || 3685 (m->mdmreg[REG_L2PROT] == ISDN_PROTO_L2_MODEM)) 3686 PARSE_ERROR; 3687 p++; 3688 if (isdn_tty_cmd_PLUSV(&p, info)) 3689 return; 3690 break; 3691#endif /* CONFIG_ISDN_AUDIO */ 3692 case 'S': /* SUSPEND */ 3693 p++; 3694 isdn_tty_get_msnstr(ds, &p); 3695 isdn_tty_suspend(ds, info, m); 3696 break; 3697 case 'R': /* RESUME */ 3698 p++; 3699 isdn_tty_get_msnstr(ds, &p); 3700 isdn_tty_resume(ds, info, m); 3701 break; 3702 case 'M': /* MESSAGE */ 3703 p++; 3704 isdn_tty_send_msg(info, m, p); 3705 break; 3706 default: 3707 PARSE_ERROR; 3708 } 3709 break; 3710 case '&': 3711 p++; 3712 if (isdn_tty_cmd_ATand(&p, info)) 3713 return; 3714 break; 3715 default: 3716 PARSE_ERROR; 3717 } 3718 } 3719#ifdef CONFIG_ISDN_AUDIO 3720 if (!info->vonline) 3721#endif 3722 isdn_tty_modem_result(RESULT_OK, info); 3723} 3724 3725/* Need own toupper() because standard-toupper is not available 3726 * within modules. 3727 */ 3728#define my_toupper(c) (((c>='a')&&(c<='z'))?(c&0xdf):c) 3729 3730/* 3731 * Perform line-editing of AT-commands 3732 * 3733 * Parameters: 3734 * p inputbuffer 3735 * count length of buffer 3736 * channel index to line (minor-device) 3737 */ 3738static int 3739isdn_tty_edit_at(const char *p, int count, modem_info * info) 3740{ 3741 atemu *m = &info->emu; 3742 int total = 0; 3743 u_char c; 3744 char eb[2]; 3745 int cnt; 3746 3747 for (cnt = count; cnt > 0; p++, cnt--) { 3748 c = *p; 3749 total++; 3750 if (c == m->mdmreg[REG_CR] || c == m->mdmreg[REG_LF]) { 3751 /* Separator (CR or LF) */ 3752 m->mdmcmd[m->mdmcmdl] = 0; 3753 if (m->mdmreg[REG_ECHO] & BIT_ECHO) { 3754 eb[0] = c; 3755 eb[1] = 0; 3756 isdn_tty_at_cout(eb, info); 3757 } 3758 if ((m->mdmcmdl >= 2) && (!(strncmp(m->mdmcmd, "AT", 2)))) 3759 isdn_tty_parse_at(info); 3760 m->mdmcmdl = 0; 3761 continue; 3762 } 3763 if (c == m->mdmreg[REG_BS] && m->mdmreg[REG_BS] < 128) { 3764 /* Backspace-Function */ 3765 if ((m->mdmcmdl > 2) || (!m->mdmcmdl)) { 3766 if (m->mdmcmdl) 3767 m->mdmcmdl--; 3768 if (m->mdmreg[REG_ECHO] & BIT_ECHO) 3769 isdn_tty_at_cout("\b", info); 3770 } 3771 continue; 3772 } 3773 if (cmdchar(c)) { 3774 if (m->mdmreg[REG_ECHO] & BIT_ECHO) { 3775 eb[0] = c; 3776 eb[1] = 0; 3777 isdn_tty_at_cout(eb, info); 3778 } 3779 if (m->mdmcmdl < 255) { 3780 c = my_toupper(c); 3781 switch (m->mdmcmdl) { 3782 case 1: 3783 if (c == 'T') { 3784 m->mdmcmd[m->mdmcmdl] = c; 3785 m->mdmcmd[++m->mdmcmdl] = 0; 3786 break; 3787 } else 3788 m->mdmcmdl = 0; 3789 /* Fall through, check for 'A' */ 3790 case 0: 3791 if (c == 'A') { 3792 m->mdmcmd[m->mdmcmdl] = c; 3793 m->mdmcmd[++m->mdmcmdl] = 0; 3794 } 3795 break; 3796 default: 3797 m->mdmcmd[m->mdmcmdl] = c; 3798 m->mdmcmd[++m->mdmcmdl] = 0; 3799 } 3800 } 3801 } 3802 } 3803 return total; 3804} 3805 3806/* 3807 * Switch all modem-channels who are online and got a valid 3808 * escape-sequence 1.5 seconds ago, to command-mode. 3809 * This function is called every second via timer-interrupt from within 3810 * timer-dispatcher isdn_timer_function() 3811 */ 3812void 3813isdn_tty_modem_escape(void) 3814{ 3815 int ton = 0; 3816 int i; 3817 int midx; 3818 3819 for (i = 0; i < ISDN_MAX_CHANNELS; i++) 3820 if (USG_MODEM(dev->usage[i])) 3821 if ((midx = dev->m_idx[i]) >= 0) { 3822 modem_info *info = &dev->mdm.info[midx]; 3823 if (info->online) { 3824 ton = 1; 3825 if ((info->emu.pluscount == 3) && 3826 time_after(jiffies , info->emu.lastplus + PLUSWAIT2)) { 3827 info->emu.pluscount = 0; 3828 info->online = 0; 3829 isdn_tty_modem_result(RESULT_OK, info); 3830 } 3831 } 3832 } 3833 isdn_timer_ctrl(ISDN_TIMER_MODEMPLUS, ton); 3834} 3835 3836/* 3837 * Put a RING-message to all modem-channels who have the RI-bit set. 3838 * This function is called every second via timer-interrupt from within 3839 * timer-dispatcher isdn_timer_function() 3840 */ 3841void 3842isdn_tty_modem_ring(void) 3843{ 3844 int ton = 0; 3845 int i; 3846 3847 for (i = 0; i < ISDN_MAX_CHANNELS; i++) { 3848 modem_info *info = &dev->mdm.info[i]; 3849 if (info->msr & UART_MSR_RI) { 3850 ton = 1; 3851 isdn_tty_modem_result(RESULT_RING, info); 3852 } 3853 } 3854 isdn_timer_ctrl(ISDN_TIMER_MODEMRING, ton); 3855} 3856 3857/* 3858 * For all online tty's, try sending data to 3859 * the lower levels. 3860 */ 3861void 3862isdn_tty_modem_xmit(void) 3863{ 3864 int ton = 1; 3865 int i; 3866 3867 for (i = 0; i < ISDN_MAX_CHANNELS; i++) { 3868 modem_info *info = &dev->mdm.info[i]; 3869 if (info->online) { 3870 ton = 1; 3871 isdn_tty_senddown(info); 3872 isdn_tty_tint(info); 3873 } 3874 } 3875 isdn_timer_ctrl(ISDN_TIMER_MODEMXMIT, ton); 3876} 3877 3878/* 3879 * Check all channels if we have a 'no carrier' timeout. 3880 * Timeout value is set by Register S7. 3881 */ 3882void 3883isdn_tty_carrier_timeout(void) 3884{ 3885 int ton = 0; 3886 int i; 3887 3888 for (i = 0; i < ISDN_MAX_CHANNELS; i++) { 3889 modem_info *info = &dev->mdm.info[i]; 3890 if (info->dialing) { 3891 if (info->emu.carrierwait++ > info->emu.mdmreg[REG_WAITC]) { 3892 info->dialing = 0; 3893 isdn_tty_modem_result(RESULT_NO_CARRIER, info); 3894 isdn_tty_modem_hup(info, 1); 3895 } 3896 else 3897 ton = 1; 3898 } 3899 } 3900 isdn_timer_ctrl(ISDN_TIMER_CARRIER, ton); 3901} 3902