phy_device.c revision 0f0ca340e57bd7446855fefd07a64249acf81223
1/* 2 * drivers/net/phy/phy_device.c 3 * 4 * Framework for finding and configuring PHYs. 5 * Also contains generic PHY driver 6 * 7 * Author: Andy Fleming 8 * 9 * Copyright (c) 2004 Freescale Semiconductor, Inc. 10 * 11 * This program is free software; you can redistribute it and/or modify it 12 * under the terms of the GNU General Public License as published by the 13 * Free Software Foundation; either version 2 of the License, or (at your 14 * option) any later version. 15 * 16 */ 17#include <linux/kernel.h> 18#include <linux/string.h> 19#include <linux/errno.h> 20#include <linux/unistd.h> 21#include <linux/slab.h> 22#include <linux/interrupt.h> 23#include <linux/init.h> 24#include <linux/delay.h> 25#include <linux/netdevice.h> 26#include <linux/etherdevice.h> 27#include <linux/skbuff.h> 28#include <linux/mm.h> 29#include <linux/module.h> 30#include <linux/mii.h> 31#include <linux/ethtool.h> 32#include <linux/phy.h> 33 34#include <asm/io.h> 35#include <asm/irq.h> 36#include <asm/uaccess.h> 37 38MODULE_DESCRIPTION("PHY library"); 39MODULE_AUTHOR("Andy Fleming"); 40MODULE_LICENSE("GPL"); 41 42static struct phy_driver genphy_driver; 43extern int mdio_bus_init(void); 44extern void mdio_bus_exit(void); 45 46void phy_device_free(struct phy_device *phydev) 47{ 48 kfree(phydev); 49} 50 51static void phy_device_release(struct device *dev) 52{ 53 phy_device_free(to_phy_device(dev)); 54} 55 56static LIST_HEAD(phy_fixup_list); 57static DEFINE_MUTEX(phy_fixup_lock); 58 59/* 60 * Creates a new phy_fixup and adds it to the list 61 * @bus_id: A string which matches phydev->dev.bus_id (or PHY_ANY_ID) 62 * @phy_uid: Used to match against phydev->phy_id (the UID of the PHY) 63 * It can also be PHY_ANY_UID 64 * @phy_uid_mask: Applied to phydev->phy_id and fixup->phy_uid before 65 * comparison 66 * @run: The actual code to be run when a matching PHY is found 67 */ 68int phy_register_fixup(const char *bus_id, u32 phy_uid, u32 phy_uid_mask, 69 int (*run)(struct phy_device *)) 70{ 71 struct phy_fixup *fixup; 72 73 fixup = kzalloc(sizeof(struct phy_fixup), GFP_KERNEL); 74 if (!fixup) 75 return -ENOMEM; 76 77 strlcpy(fixup->bus_id, bus_id, sizeof(fixup->bus_id)); 78 fixup->phy_uid = phy_uid; 79 fixup->phy_uid_mask = phy_uid_mask; 80 fixup->run = run; 81 82 mutex_lock(&phy_fixup_lock); 83 list_add_tail(&fixup->list, &phy_fixup_list); 84 mutex_unlock(&phy_fixup_lock); 85 86 return 0; 87} 88EXPORT_SYMBOL(phy_register_fixup); 89 90/* Registers a fixup to be run on any PHY with the UID in phy_uid */ 91int phy_register_fixup_for_uid(u32 phy_uid, u32 phy_uid_mask, 92 int (*run)(struct phy_device *)) 93{ 94 return phy_register_fixup(PHY_ANY_ID, phy_uid, phy_uid_mask, run); 95} 96EXPORT_SYMBOL(phy_register_fixup_for_uid); 97 98/* Registers a fixup to be run on the PHY with id string bus_id */ 99int phy_register_fixup_for_id(const char *bus_id, 100 int (*run)(struct phy_device *)) 101{ 102 return phy_register_fixup(bus_id, PHY_ANY_UID, 0xffffffff, run); 103} 104EXPORT_SYMBOL(phy_register_fixup_for_id); 105 106/* 107 * Returns 1 if fixup matches phydev in bus_id and phy_uid. 108 * Fixups can be set to match any in one or more fields. 109 */ 110static int phy_needs_fixup(struct phy_device *phydev, struct phy_fixup *fixup) 111{ 112 if (strcmp(fixup->bus_id, dev_name(&phydev->dev)) != 0) 113 if (strcmp(fixup->bus_id, PHY_ANY_ID) != 0) 114 return 0; 115 116 if ((fixup->phy_uid & fixup->phy_uid_mask) != 117 (phydev->phy_id & fixup->phy_uid_mask)) 118 if (fixup->phy_uid != PHY_ANY_UID) 119 return 0; 120 121 return 1; 122} 123 124/* Runs any matching fixups for this phydev */ 125int phy_scan_fixups(struct phy_device *phydev) 126{ 127 struct phy_fixup *fixup; 128 129 mutex_lock(&phy_fixup_lock); 130 list_for_each_entry(fixup, &phy_fixup_list, list) { 131 if (phy_needs_fixup(phydev, fixup)) { 132 int err; 133 134 err = fixup->run(phydev); 135 136 if (err < 0) 137 return err; 138 } 139 } 140 mutex_unlock(&phy_fixup_lock); 141 142 return 0; 143} 144EXPORT_SYMBOL(phy_scan_fixups); 145 146struct phy_device* phy_device_create(struct mii_bus *bus, int addr, int phy_id) 147{ 148 struct phy_device *dev; 149 /* We allocate the device, and initialize the 150 * default values */ 151 dev = kzalloc(sizeof(*dev), GFP_KERNEL); 152 153 if (NULL == dev) 154 return (struct phy_device*) PTR_ERR((void*)-ENOMEM); 155 156 dev->dev.release = phy_device_release; 157 158 dev->speed = 0; 159 dev->duplex = -1; 160 dev->pause = dev->asym_pause = 0; 161 dev->link = 1; 162 dev->interface = PHY_INTERFACE_MODE_GMII; 163 164 dev->autoneg = AUTONEG_ENABLE; 165 166 dev->addr = addr; 167 dev->phy_id = phy_id; 168 dev->bus = bus; 169 170 dev->state = PHY_DOWN; 171 172 mutex_init(&dev->lock); 173 174 return dev; 175} 176EXPORT_SYMBOL(phy_device_create); 177 178/** 179 * get_phy_id - reads the specified addr for its ID. 180 * @bus: the target MII bus 181 * @addr: PHY address on the MII bus 182 * @phy_id: where to store the ID retrieved. 183 * 184 * Description: Reads the ID registers of the PHY at @addr on the 185 * @bus, stores it in @phy_id and returns zero on success. 186 */ 187int get_phy_id(struct mii_bus *bus, int addr, u32 *phy_id) 188{ 189 int phy_reg; 190 191 /* Grab the bits from PHYIR1, and put them 192 * in the upper half */ 193 phy_reg = bus->read(bus, addr, MII_PHYSID1); 194 195 if (phy_reg < 0) 196 return -EIO; 197 198 *phy_id = (phy_reg & 0xffff) << 16; 199 200 /* Grab the bits from PHYIR2, and put them in the lower half */ 201 phy_reg = bus->read(bus, addr, MII_PHYSID2); 202 203 if (phy_reg < 0) 204 return -EIO; 205 206 *phy_id |= (phy_reg & 0xffff); 207 208 return 0; 209} 210EXPORT_SYMBOL(get_phy_id); 211 212/** 213 * get_phy_device - reads the specified PHY device and returns its @phy_device struct 214 * @bus: the target MII bus 215 * @addr: PHY address on the MII bus 216 * 217 * Description: Reads the ID registers of the PHY at @addr on the 218 * @bus, then allocates and returns the phy_device to represent it. 219 */ 220struct phy_device * get_phy_device(struct mii_bus *bus, int addr) 221{ 222 struct phy_device *dev = NULL; 223 u32 phy_id; 224 int r; 225 226 r = get_phy_id(bus, addr, &phy_id); 227 if (r) 228 return ERR_PTR(r); 229 230 /* If the phy_id is mostly Fs, there is no device there */ 231 if ((phy_id & 0x1fffffff) == 0x1fffffff) 232 return NULL; 233 234 /* 235 * Broken hardware is sometimes missing the pull down resistor on the 236 * MDIO line, which results in reads to non-existent devices returning 237 * 0 rather than 0xffff. Catch this here and treat 0 as a non-existent 238 * device as well. 239 */ 240 if (phy_id == 0) 241 return NULL; 242 243 dev = phy_device_create(bus, addr, phy_id); 244 245 return dev; 246} 247 248/** 249 * phy_prepare_link - prepares the PHY layer to monitor link status 250 * @phydev: target phy_device struct 251 * @handler: callback function for link status change notifications 252 * 253 * Description: Tells the PHY infrastructure to handle the 254 * gory details on monitoring link status (whether through 255 * polling or an interrupt), and to call back to the 256 * connected device driver when the link status changes. 257 * If you want to monitor your own link state, don't call 258 * this function. 259 */ 260void phy_prepare_link(struct phy_device *phydev, 261 void (*handler)(struct net_device *)) 262{ 263 phydev->adjust_link = handler; 264} 265 266/** 267 * phy_connect - connect an ethernet device to a PHY device 268 * @dev: the network device to connect 269 * @bus_id: the id string of the PHY device to connect 270 * @handler: callback function for state change notifications 271 * @flags: PHY device's dev_flags 272 * @interface: PHY device's interface 273 * 274 * Description: Convenience function for connecting ethernet 275 * devices to PHY devices. The default behavior is for 276 * the PHY infrastructure to handle everything, and only notify 277 * the connected driver when the link status changes. If you 278 * don't want, or can't use the provided functionality, you may 279 * choose to call only the subset of functions which provide 280 * the desired functionality. 281 */ 282struct phy_device * phy_connect(struct net_device *dev, const char *bus_id, 283 void (*handler)(struct net_device *), u32 flags, 284 phy_interface_t interface) 285{ 286 struct phy_device *phydev; 287 288 phydev = phy_attach(dev, bus_id, flags, interface); 289 290 if (IS_ERR(phydev)) 291 return phydev; 292 293 phy_prepare_link(phydev, handler); 294 295 phy_start_machine(phydev, NULL); 296 297 if (phydev->irq > 0) 298 phy_start_interrupts(phydev); 299 300 return phydev; 301} 302EXPORT_SYMBOL(phy_connect); 303 304/** 305 * phy_disconnect - disable interrupts, stop state machine, and detach a PHY device 306 * @phydev: target phy_device struct 307 */ 308void phy_disconnect(struct phy_device *phydev) 309{ 310 if (phydev->irq > 0) 311 phy_stop_interrupts(phydev); 312 313 phy_stop_machine(phydev); 314 315 phydev->adjust_link = NULL; 316 317 phy_detach(phydev); 318} 319EXPORT_SYMBOL(phy_disconnect); 320 321/** 322 * phy_attach - attach a network device to a particular PHY device 323 * @dev: network device to attach 324 * @bus_id: PHY device to attach 325 * @flags: PHY device's dev_flags 326 * @interface: PHY device's interface 327 * 328 * Description: Called by drivers to attach to a particular PHY 329 * device. The phy_device is found, and properly hooked up 330 * to the phy_driver. If no driver is attached, then the 331 * genphy_driver is used. The phy_device is given a ptr to 332 * the attaching device, and given a callback for link status 333 * change. The phy_device is returned to the attaching driver. 334 */ 335struct phy_device *phy_attach(struct net_device *dev, 336 const char *bus_id, u32 flags, phy_interface_t interface) 337{ 338 struct bus_type *bus = &mdio_bus_type; 339 struct phy_device *phydev; 340 struct device *d; 341 342 /* Search the list of PHY devices on the mdio bus for the 343 * PHY with the requested name */ 344 d = bus_find_device_by_name(bus, NULL, bus_id); 345 if (d) { 346 phydev = to_phy_device(d); 347 } else { 348 printk(KERN_ERR "%s not found\n", bus_id); 349 return ERR_PTR(-ENODEV); 350 } 351 352 /* Assume that if there is no driver, that it doesn't 353 * exist, and we should use the genphy driver. */ 354 if (NULL == d->driver) { 355 int err; 356 d->driver = &genphy_driver.driver; 357 358 err = d->driver->probe(d); 359 if (err >= 0) 360 err = device_bind_driver(d); 361 362 if (err) 363 return ERR_PTR(err); 364 } 365 366 if (phydev->attached_dev) { 367 printk(KERN_ERR "%s: %s already attached\n", 368 dev->name, bus_id); 369 return ERR_PTR(-EBUSY); 370 } 371 372 phydev->attached_dev = dev; 373 374 phydev->dev_flags = flags; 375 376 phydev->interface = interface; 377 378 /* Do initial configuration here, now that 379 * we have certain key parameters 380 * (dev_flags and interface) */ 381 if (phydev->drv->config_init) { 382 int err; 383 384 err = phy_scan_fixups(phydev); 385 386 if (err < 0) 387 return ERR_PTR(err); 388 389 err = phydev->drv->config_init(phydev); 390 391 if (err < 0) 392 return ERR_PTR(err); 393 } 394 395 return phydev; 396} 397EXPORT_SYMBOL(phy_attach); 398 399/** 400 * phy_detach - detach a PHY device from its network device 401 * @phydev: target phy_device struct 402 */ 403void phy_detach(struct phy_device *phydev) 404{ 405 phydev->attached_dev = NULL; 406 407 /* If the device had no specific driver before (i.e. - it 408 * was using the generic driver), we unbind the device 409 * from the generic driver so that there's a chance a 410 * real driver could be loaded */ 411 if (phydev->dev.driver == &genphy_driver.driver) 412 device_release_driver(&phydev->dev); 413} 414EXPORT_SYMBOL(phy_detach); 415 416 417/* Generic PHY support and helper functions */ 418 419/** 420 * genphy_config_advert - sanitize and advertise auto-negotation parameters 421 * @phydev: target phy_device struct 422 * 423 * Description: Writes MII_ADVERTISE with the appropriate values, 424 * after sanitizing the values to make sure we only advertise 425 * what is supported. Returns < 0 on error, 0 if the PHY's advertisement 426 * hasn't changed, and > 0 if it has changed. 427 */ 428int genphy_config_advert(struct phy_device *phydev) 429{ 430 u32 advertise; 431 int oldadv, adv; 432 int err, changed = 0; 433 434 /* Only allow advertising what 435 * this PHY supports */ 436 phydev->advertising &= phydev->supported; 437 advertise = phydev->advertising; 438 439 /* Setup standard advertisement */ 440 oldadv = adv = phy_read(phydev, MII_ADVERTISE); 441 442 if (adv < 0) 443 return adv; 444 445 adv &= ~(ADVERTISE_ALL | ADVERTISE_100BASE4 | ADVERTISE_PAUSE_CAP | 446 ADVERTISE_PAUSE_ASYM); 447 if (advertise & ADVERTISED_10baseT_Half) 448 adv |= ADVERTISE_10HALF; 449 if (advertise & ADVERTISED_10baseT_Full) 450 adv |= ADVERTISE_10FULL; 451 if (advertise & ADVERTISED_100baseT_Half) 452 adv |= ADVERTISE_100HALF; 453 if (advertise & ADVERTISED_100baseT_Full) 454 adv |= ADVERTISE_100FULL; 455 if (advertise & ADVERTISED_Pause) 456 adv |= ADVERTISE_PAUSE_CAP; 457 if (advertise & ADVERTISED_Asym_Pause) 458 adv |= ADVERTISE_PAUSE_ASYM; 459 460 if (adv != oldadv) { 461 err = phy_write(phydev, MII_ADVERTISE, adv); 462 463 if (err < 0) 464 return err; 465 changed = 1; 466 } 467 468 /* Configure gigabit if it's supported */ 469 if (phydev->supported & (SUPPORTED_1000baseT_Half | 470 SUPPORTED_1000baseT_Full)) { 471 oldadv = adv = phy_read(phydev, MII_CTRL1000); 472 473 if (adv < 0) 474 return adv; 475 476 adv &= ~(ADVERTISE_1000FULL | ADVERTISE_1000HALF); 477 if (advertise & SUPPORTED_1000baseT_Half) 478 adv |= ADVERTISE_1000HALF; 479 if (advertise & SUPPORTED_1000baseT_Full) 480 adv |= ADVERTISE_1000FULL; 481 482 if (adv != oldadv) { 483 err = phy_write(phydev, MII_CTRL1000, adv); 484 485 if (err < 0) 486 return err; 487 changed = 1; 488 } 489 } 490 491 return changed; 492} 493EXPORT_SYMBOL(genphy_config_advert); 494 495/** 496 * genphy_setup_forced - configures/forces speed/duplex from @phydev 497 * @phydev: target phy_device struct 498 * 499 * Description: Configures MII_BMCR to force speed/duplex 500 * to the values in phydev. Assumes that the values are valid. 501 * Please see phy_sanitize_settings(). 502 */ 503int genphy_setup_forced(struct phy_device *phydev) 504{ 505 int err; 506 int ctl = 0; 507 508 phydev->pause = phydev->asym_pause = 0; 509 510 if (SPEED_1000 == phydev->speed) 511 ctl |= BMCR_SPEED1000; 512 else if (SPEED_100 == phydev->speed) 513 ctl |= BMCR_SPEED100; 514 515 if (DUPLEX_FULL == phydev->duplex) 516 ctl |= BMCR_FULLDPLX; 517 518 err = phy_write(phydev, MII_BMCR, ctl); 519 520 if (err < 0) 521 return err; 522 523 /* 524 * Run the fixups on this PHY, just in case the 525 * board code needs to change something after a reset 526 */ 527 err = phy_scan_fixups(phydev); 528 529 if (err < 0) 530 return err; 531 532 /* We just reset the device, so we'd better configure any 533 * settings the PHY requires to operate */ 534 if (phydev->drv->config_init) 535 err = phydev->drv->config_init(phydev); 536 537 return err; 538} 539 540 541/** 542 * genphy_restart_aneg - Enable and Restart Autonegotiation 543 * @phydev: target phy_device struct 544 */ 545int genphy_restart_aneg(struct phy_device *phydev) 546{ 547 int ctl; 548 549 ctl = phy_read(phydev, MII_BMCR); 550 551 if (ctl < 0) 552 return ctl; 553 554 ctl |= (BMCR_ANENABLE | BMCR_ANRESTART); 555 556 /* Don't isolate the PHY if we're negotiating */ 557 ctl &= ~(BMCR_ISOLATE); 558 559 ctl = phy_write(phydev, MII_BMCR, ctl); 560 561 return ctl; 562} 563EXPORT_SYMBOL(genphy_restart_aneg); 564 565 566/** 567 * genphy_config_aneg - restart auto-negotiation or write BMCR 568 * @phydev: target phy_device struct 569 * 570 * Description: If auto-negotiation is enabled, we configure the 571 * advertising, and then restart auto-negotiation. If it is not 572 * enabled, then we write the BMCR. 573 */ 574int genphy_config_aneg(struct phy_device *phydev) 575{ 576 int result; 577 578 if (AUTONEG_ENABLE != phydev->autoneg) 579 return genphy_setup_forced(phydev); 580 581 result = genphy_config_advert(phydev); 582 583 if (result < 0) /* error */ 584 return result; 585 586 if (result == 0) { 587 /* Advertisment hasn't changed, but maybe aneg was never on to 588 * begin with? Or maybe phy was isolated? */ 589 int ctl = phy_read(phydev, MII_BMCR); 590 591 if (ctl < 0) 592 return ctl; 593 594 if (!(ctl & BMCR_ANENABLE) || (ctl & BMCR_ISOLATE)) 595 result = 1; /* do restart aneg */ 596 } 597 598 /* Only restart aneg if we are advertising something different 599 * than we were before. */ 600 if (result > 0) 601 result = genphy_restart_aneg(phydev); 602 603 return result; 604} 605EXPORT_SYMBOL(genphy_config_aneg); 606 607/** 608 * genphy_update_link - update link status in @phydev 609 * @phydev: target phy_device struct 610 * 611 * Description: Update the value in phydev->link to reflect the 612 * current link value. In order to do this, we need to read 613 * the status register twice, keeping the second value. 614 */ 615int genphy_update_link(struct phy_device *phydev) 616{ 617 int status; 618 619 /* Do a fake read */ 620 status = phy_read(phydev, MII_BMSR); 621 622 if (status < 0) 623 return status; 624 625 /* Read link and autonegotiation status */ 626 status = phy_read(phydev, MII_BMSR); 627 628 if (status < 0) 629 return status; 630 631 if ((status & BMSR_LSTATUS) == 0) 632 phydev->link = 0; 633 else 634 phydev->link = 1; 635 636 return 0; 637} 638EXPORT_SYMBOL(genphy_update_link); 639 640/** 641 * genphy_read_status - check the link status and update current link state 642 * @phydev: target phy_device struct 643 * 644 * Description: Check the link, then figure out the current state 645 * by comparing what we advertise with what the link partner 646 * advertises. Start by checking the gigabit possibilities, 647 * then move on to 10/100. 648 */ 649int genphy_read_status(struct phy_device *phydev) 650{ 651 int adv; 652 int err; 653 int lpa; 654 int lpagb = 0; 655 656 /* Update the link, but return if there 657 * was an error */ 658 err = genphy_update_link(phydev); 659 if (err) 660 return err; 661 662 if (AUTONEG_ENABLE == phydev->autoneg) { 663 if (phydev->supported & (SUPPORTED_1000baseT_Half 664 | SUPPORTED_1000baseT_Full)) { 665 lpagb = phy_read(phydev, MII_STAT1000); 666 667 if (lpagb < 0) 668 return lpagb; 669 670 adv = phy_read(phydev, MII_CTRL1000); 671 672 if (adv < 0) 673 return adv; 674 675 lpagb &= adv << 2; 676 } 677 678 lpa = phy_read(phydev, MII_LPA); 679 680 if (lpa < 0) 681 return lpa; 682 683 adv = phy_read(phydev, MII_ADVERTISE); 684 685 if (adv < 0) 686 return adv; 687 688 lpa &= adv; 689 690 phydev->speed = SPEED_10; 691 phydev->duplex = DUPLEX_HALF; 692 phydev->pause = phydev->asym_pause = 0; 693 694 if (lpagb & (LPA_1000FULL | LPA_1000HALF)) { 695 phydev->speed = SPEED_1000; 696 697 if (lpagb & LPA_1000FULL) 698 phydev->duplex = DUPLEX_FULL; 699 } else if (lpa & (LPA_100FULL | LPA_100HALF)) { 700 phydev->speed = SPEED_100; 701 702 if (lpa & LPA_100FULL) 703 phydev->duplex = DUPLEX_FULL; 704 } else 705 if (lpa & LPA_10FULL) 706 phydev->duplex = DUPLEX_FULL; 707 708 if (phydev->duplex == DUPLEX_FULL){ 709 phydev->pause = lpa & LPA_PAUSE_CAP ? 1 : 0; 710 phydev->asym_pause = lpa & LPA_PAUSE_ASYM ? 1 : 0; 711 } 712 } else { 713 int bmcr = phy_read(phydev, MII_BMCR); 714 if (bmcr < 0) 715 return bmcr; 716 717 if (bmcr & BMCR_FULLDPLX) 718 phydev->duplex = DUPLEX_FULL; 719 else 720 phydev->duplex = DUPLEX_HALF; 721 722 if (bmcr & BMCR_SPEED1000) 723 phydev->speed = SPEED_1000; 724 else if (bmcr & BMCR_SPEED100) 725 phydev->speed = SPEED_100; 726 else 727 phydev->speed = SPEED_10; 728 729 phydev->pause = phydev->asym_pause = 0; 730 } 731 732 return 0; 733} 734EXPORT_SYMBOL(genphy_read_status); 735 736static int genphy_config_init(struct phy_device *phydev) 737{ 738 int val; 739 u32 features; 740 741 /* For now, I'll claim that the generic driver supports 742 * all possible port types */ 743 features = (SUPPORTED_TP | SUPPORTED_MII 744 | SUPPORTED_AUI | SUPPORTED_FIBRE | 745 SUPPORTED_BNC); 746 747 /* Do we support autonegotiation? */ 748 val = phy_read(phydev, MII_BMSR); 749 750 if (val < 0) 751 return val; 752 753 if (val & BMSR_ANEGCAPABLE) 754 features |= SUPPORTED_Autoneg; 755 756 if (val & BMSR_100FULL) 757 features |= SUPPORTED_100baseT_Full; 758 if (val & BMSR_100HALF) 759 features |= SUPPORTED_100baseT_Half; 760 if (val & BMSR_10FULL) 761 features |= SUPPORTED_10baseT_Full; 762 if (val & BMSR_10HALF) 763 features |= SUPPORTED_10baseT_Half; 764 765 if (val & BMSR_ESTATEN) { 766 val = phy_read(phydev, MII_ESTATUS); 767 768 if (val < 0) 769 return val; 770 771 if (val & ESTATUS_1000_TFULL) 772 features |= SUPPORTED_1000baseT_Full; 773 if (val & ESTATUS_1000_THALF) 774 features |= SUPPORTED_1000baseT_Half; 775 } 776 777 phydev->supported = features; 778 phydev->advertising = features; 779 780 return 0; 781} 782int genphy_suspend(struct phy_device *phydev) 783{ 784 int value; 785 786 mutex_lock(&phydev->lock); 787 788 value = phy_read(phydev, MII_BMCR); 789 phy_write(phydev, MII_BMCR, (value | BMCR_PDOWN)); 790 791 mutex_unlock(&phydev->lock); 792 793 return 0; 794} 795EXPORT_SYMBOL(genphy_suspend); 796 797int genphy_resume(struct phy_device *phydev) 798{ 799 int value; 800 801 mutex_lock(&phydev->lock); 802 803 value = phy_read(phydev, MII_BMCR); 804 phy_write(phydev, MII_BMCR, (value & ~BMCR_PDOWN)); 805 806 mutex_unlock(&phydev->lock); 807 808 return 0; 809} 810EXPORT_SYMBOL(genphy_resume); 811 812/** 813 * phy_probe - probe and init a PHY device 814 * @dev: device to probe and init 815 * 816 * Description: Take care of setting up the phy_device structure, 817 * set the state to READY (the driver's init function should 818 * set it to STARTING if needed). 819 */ 820static int phy_probe(struct device *dev) 821{ 822 struct phy_device *phydev; 823 struct phy_driver *phydrv; 824 struct device_driver *drv; 825 int err = 0; 826 827 phydev = to_phy_device(dev); 828 829 /* Make sure the driver is held. 830 * XXX -- Is this correct? */ 831 drv = get_driver(phydev->dev.driver); 832 phydrv = to_phy_driver(drv); 833 phydev->drv = phydrv; 834 835 /* Disable the interrupt if the PHY doesn't support it */ 836 if (!(phydrv->flags & PHY_HAS_INTERRUPT)) 837 phydev->irq = PHY_POLL; 838 839 mutex_lock(&phydev->lock); 840 841 /* Start out supporting everything. Eventually, 842 * a controller will attach, and may modify one 843 * or both of these values */ 844 phydev->supported = phydrv->features; 845 phydev->advertising = phydrv->features; 846 847 /* Set the state to READY by default */ 848 phydev->state = PHY_READY; 849 850 if (phydev->drv->probe) 851 err = phydev->drv->probe(phydev); 852 853 mutex_unlock(&phydev->lock); 854 855 return err; 856 857} 858 859static int phy_remove(struct device *dev) 860{ 861 struct phy_device *phydev; 862 863 phydev = to_phy_device(dev); 864 865 mutex_lock(&phydev->lock); 866 phydev->state = PHY_DOWN; 867 mutex_unlock(&phydev->lock); 868 869 if (phydev->drv->remove) 870 phydev->drv->remove(phydev); 871 872 put_driver(dev->driver); 873 phydev->drv = NULL; 874 875 return 0; 876} 877 878/** 879 * phy_driver_register - register a phy_driver with the PHY layer 880 * @new_driver: new phy_driver to register 881 */ 882int phy_driver_register(struct phy_driver *new_driver) 883{ 884 int retval; 885 886 new_driver->driver.name = new_driver->name; 887 new_driver->driver.bus = &mdio_bus_type; 888 new_driver->driver.probe = phy_probe; 889 new_driver->driver.remove = phy_remove; 890 891 retval = driver_register(&new_driver->driver); 892 893 if (retval) { 894 printk(KERN_ERR "%s: Error %d in registering driver\n", 895 new_driver->name, retval); 896 897 return retval; 898 } 899 900 pr_debug("%s: Registered new driver\n", new_driver->name); 901 902 return 0; 903} 904EXPORT_SYMBOL(phy_driver_register); 905 906void phy_driver_unregister(struct phy_driver *drv) 907{ 908 driver_unregister(&drv->driver); 909} 910EXPORT_SYMBOL(phy_driver_unregister); 911 912static struct phy_driver genphy_driver = { 913 .phy_id = 0xffffffff, 914 .phy_id_mask = 0xffffffff, 915 .name = "Generic PHY", 916 .config_init = genphy_config_init, 917 .features = 0, 918 .config_aneg = genphy_config_aneg, 919 .read_status = genphy_read_status, 920 .suspend = genphy_suspend, 921 .resume = genphy_resume, 922 .driver = {.owner= THIS_MODULE, }, 923}; 924 925static int __init phy_init(void) 926{ 927 int rc; 928 929 rc = mdio_bus_init(); 930 if (rc) 931 return rc; 932 933 rc = phy_driver_register(&genphy_driver); 934 if (rc) 935 mdio_bus_exit(); 936 937 return rc; 938} 939 940static void __exit phy_exit(void) 941{ 942 phy_driver_unregister(&genphy_driver); 943 mdio_bus_exit(); 944} 945 946subsys_initcall(phy_init); 947module_exit(phy_exit); 948