1#
2# Wireless LAN device configuration
3#
4
5menuconfig WLAN
6	bool "Wireless LAN"
7	depends on !S390
8	depends on NET
9	select WIRELESS
10	default y
11	---help---
12	  This section contains all the pre 802.11 and 802.11 wireless
13	  device drivers. For a complete list of drivers and documentation
14	  on them refer to the wireless wiki:
15
16	  http://wireless.kernel.org/en/users/Drivers
17
18if WLAN
19
20config PCMCIA_RAYCS
21	tristate "Aviator/Raytheon 2.4GHz wireless support"
22	depends on PCMCIA
23	select WIRELESS_EXT
24	select WEXT_SPY
25	select WEXT_PRIV
26	---help---
27	  Say Y here if you intend to attach an Aviator/Raytheon PCMCIA
28	  (PC-card) wireless Ethernet networking card to your computer.
29	  Please read the file <file:Documentation/networking/ray_cs.txt> for
30	  details.
31
32	  To compile this driver as a module, choose M here: the module will be
33	  called ray_cs.  If unsure, say N.
34
35config LIBERTAS_THINFIRM
36	tristate "Marvell 8xxx Libertas WLAN driver support with thin firmware"
37	depends on MAC80211
38	select FW_LOADER
39	---help---
40	  A library for Marvell Libertas 8xxx devices using thinfirm.
41
42config LIBERTAS_THINFIRM_DEBUG
43	bool "Enable full debugging output in the Libertas thin firmware module."
44	depends on LIBERTAS_THINFIRM
45	---help---
46	  Debugging support.
47
48config LIBERTAS_THINFIRM_USB
49	tristate "Marvell Libertas 8388 USB 802.11b/g cards with thin firmware"
50	depends on LIBERTAS_THINFIRM && USB
51	---help---
52	  A driver for Marvell Libertas 8388 USB devices using thinfirm.
53
54config AIRO
55	tristate "Cisco/Aironet 34X/35X/4500/4800 ISA and PCI cards"
56	depends on ISA_DMA_API && (PCI || BROKEN)
57	select WIRELESS_EXT
58	select CRYPTO
59	select WEXT_SPY
60	select WEXT_PRIV
61	---help---
62	  This is the standard Linux driver to support Cisco/Aironet ISA and
63	  PCI 802.11 wireless cards.
64	  It supports the new 802.11b cards from Cisco (Cisco 34X, Cisco 35X
65	  - with or without encryption) as well as card before the Cisco
66	  acquisition (Aironet 4500, Aironet 4800, Aironet 4800B).
67
68	  This driver support both the standard Linux Wireless Extensions
69	  and Cisco proprietary API, so both the Linux Wireless Tools and the
70	  Cisco Linux utilities can be used to configure the card.
71
72	  The driver can be compiled as a module and will be named "airo".
73
74config ATMEL
75      tristate "Atmel at76c50x chipset  802.11b support"
76      depends on (PCI || PCMCIA)
77      select WIRELESS_EXT
78      select WEXT_PRIV
79      select FW_LOADER
80      select CRC32
81       ---help---
82        A driver 802.11b wireless cards based on the Atmel fast-vnet
83        chips. This driver supports standard Linux wireless extensions.
84
85        Many  cards based on this chipset do not have flash memory
86        and need their firmware loaded at start-up. If yours is
87        one of these, you will need to provide a firmware image
88        to be loaded into the card by the driver. The Atmel
89        firmware package can be downloaded from
90        <http://www.thekelleys.org.uk/atmel>
91
92config PCI_ATMEL
93      tristate "Atmel at76c506 PCI cards"
94      depends on ATMEL && PCI
95       ---help---
96        Enable support for PCI and mini-PCI cards containing the
97        Atmel at76c506 chip.
98
99config PCMCIA_ATMEL
100	tristate "Atmel at76c502/at76c504 PCMCIA cards"
101	depends on ATMEL && PCMCIA
102	select WIRELESS_EXT
103	select FW_LOADER
104	select CRC32
105	---help---
106	  Enable support for PCMCIA cards containing the
107	  Atmel at76c502 and at76c504 chips.
108
109config AT76C50X_USB
110        tristate "Atmel at76c503/at76c505/at76c505a USB cards"
111        depends on MAC80211 && USB
112        select FW_LOADER
113        ---help---
114          Enable support for USB Wireless devices using Atmel at76c503,
115          at76c505 or at76c505a chips.
116
117config AIRO_CS
118	tristate "Cisco/Aironet 34X/35X/4500/4800 PCMCIA cards"
119	depends on PCMCIA && (BROKEN || !M32R)
120	select WIRELESS_EXT
121	select WEXT_SPY
122	select WEXT_PRIV
123	select CRYPTO
124	select CRYPTO_AES
125	---help---
126	  This is the standard Linux driver to support Cisco/Aironet PCMCIA
127	  802.11 wireless cards.  This driver is the same as the Aironet
128	  driver part of the Linux Pcmcia package.
129	  It supports the new 802.11b cards from Cisco (Cisco 34X, Cisco 35X
130	  - with or without encryption) as well as card before the Cisco
131	  acquisition (Aironet 4500, Aironet 4800, Aironet 4800B). It also
132	  supports OEM of Cisco such as the DELL TrueMobile 4800 and Xircom
133	  802.11b cards.
134
135	  This driver support both the standard Linux Wireless Extensions
136	  and Cisco proprietary API, so both the Linux Wireless Tools and the
137	  Cisco Linux utilities can be used to configure the card.
138
139config PCMCIA_WL3501
140	tristate "Planet WL3501 PCMCIA cards"
141	depends on EXPERIMENTAL && PCMCIA
142	select WIRELESS_EXT
143	select WEXT_SPY
144	help
145	  A driver for WL3501 PCMCIA 802.11 wireless cards made by Planet.
146	  It has basic support for Linux wireless extensions and initial
147	  micro support for ethtool.
148
149config PRISM54
150	tristate 'Intersil Prism GT/Duette/Indigo PCI/Cardbus (DEPRECATED)'
151	depends on PCI && EXPERIMENTAL
152	select WIRELESS_EXT
153	select WEXT_SPY
154	select WEXT_PRIV
155	select FW_LOADER
156	---help---
157	  This enables support for FullMAC PCI/Cardbus prism54 devices. This
158	  driver is now deprecated in favor for the SoftMAC driver, p54pci.
159	  p54pci supports FullMAC PCI/Cardbus devices as well. For details on
160	  the scheduled removal of this driver on the kernel see the feature
161	  removal schedule:
162
163	  Documentation/feature-removal-schedule.txt
164
165	  For more information refer to the p54 wiki:
166
167	  http://wireless.kernel.org/en/users/Drivers/p54
168
169	  Note: You need a motherboard with DMA support to use any of these cards
170
171	  When built as module you get the module prism54
172
173config USB_ZD1201
174	tristate "USB ZD1201 based Wireless device support"
175	depends on USB
176	select WIRELESS_EXT
177	select WEXT_PRIV
178	select FW_LOADER
179	---help---
180	  Say Y if you want to use wireless LAN adapters based on the ZyDAS
181	  ZD1201 chip.
182
183	  This driver makes the adapter appear as a normal Ethernet interface,
184	  typically on wlan0.
185
186	  The zd1201 device requires external firmware to be loaded.
187	  This can be found at http://linux-lc100020.sourceforge.net/
188
189	  To compile this driver as a module, choose M here: the
190	  module will be called zd1201.
191
192config USB_NET_RNDIS_WLAN
193	tristate "Wireless RNDIS USB support"
194	depends on USB && EXPERIMENTAL
195	depends on CFG80211
196	select USB_USBNET
197	select USB_NET_CDCETHER
198	select USB_NET_RNDIS_HOST
199	---help---
200	  This is a driver for wireless RNDIS devices.
201	  These are USB based adapters found in devices such as:
202
203	  Buffalo WLI-U2-KG125S
204	  U.S. Robotics USR5421
205	  Belkin F5D7051
206	  Linksys WUSB54GSv2
207	  Linksys WUSB54GSC
208	  Asus WL169gE
209	  Eminent EM4045
210	  BT Voyager 1055
211	  Linksys WUSB54GSv1
212	  U.S. Robotics USR5420
213	  BUFFALO WLI-USB-G54
214
215	  All of these devices are based on Broadcom 4320 chip which is the
216	  only wireless RNDIS chip known to date.
217
218	  If you choose to build a module, it'll be called rndis_wlan.
219
220source "drivers/net/wireless/rtl818x/Kconfig"
221
222config ADM8211
223	tristate "ADMtek ADM8211 support"
224	depends on MAC80211 && PCI && EXPERIMENTAL
225	select CRC32
226	select EEPROM_93CX6
227	---help---
228	  This driver is for ADM8211A, ADM8211B, and ADM8211C based cards.
229	  These are PCI/mini-PCI/Cardbus 802.11b chips found in cards such as:
230
231	  Xterasys Cardbus XN-2411b
232	  Blitz NetWave Point PC
233	  TrendNet 221pc
234	  Belkin F5D6001
235	  SMC 2635W
236	  Linksys WPC11 v1
237	  Fiberline FL-WL-200X
238	  3com Office Connect (3CRSHPW796)
239	  Corega WLPCIB-11
240	  SMC 2602W V2 EU
241	  D-Link DWL-520 Revision C
242
243	  However, some of these cards have been replaced with other chips
244	  like the RTL8180L (Xterasys Cardbus XN-2411b, Belkin F5D6001) or
245	  the Ralink RT2400 (SMC2635W) without a model number change.
246
247	  Thanks to Infineon-ADMtek for their support of this driver.
248
249config MAC80211_HWSIM
250	tristate "Simulated radio testing tool for mac80211"
251	depends on MAC80211
252	---help---
253	  This driver is a developer testing tool that can be used to test
254	  IEEE 802.11 networking stack (mac80211) functionality. This is not
255	  needed for normal wireless LAN usage and is only for testing. See
256	  Documentation/networking/mac80211_hwsim for more information on how
257	  to use this tool.
258
259	  To compile this driver as a module, choose M here: the module will be
260	  called mac80211_hwsim.  If unsure, say N.
261
262config MWL8K
263	tristate "Marvell 88W8xxx PCI/PCIe Wireless support"
264	depends on MAC80211 && PCI && EXPERIMENTAL
265	---help---
266	  This driver supports Marvell TOPDOG 802.11 wireless cards.
267
268	  To compile this driver as a module, choose M here: the module
269	  will be called mwl8k.  If unsure, say N.
270
271config WIFI_CONTROL_FUNC
272	bool "Enable WiFi control function abstraction"
273	help
274	  Enables Power/Reset/Carddetect function abstraction
275
276source "drivers/net/wireless/ath/Kconfig"
277source "drivers/net/wireless/b43/Kconfig"
278source "drivers/net/wireless/b43legacy/Kconfig"
279source "drivers/net/wireless/bcmdhd/Kconfig"
280source "drivers/net/wireless/brcm80211/Kconfig"
281source "drivers/net/wireless/hostap/Kconfig"
282source "drivers/net/wireless/ipw2x00/Kconfig"
283source "drivers/net/wireless/iwlwifi/Kconfig"
284source "drivers/net/wireless/iwlegacy/Kconfig"
285source "drivers/net/wireless/iwmc3200wifi/Kconfig"
286source "drivers/net/wireless/libertas/Kconfig"
287source "drivers/net/wireless/orinoco/Kconfig"
288source "drivers/net/wireless/p54/Kconfig"
289source "drivers/net/wireless/rt2x00/Kconfig"
290source "drivers/net/wireless/rtlwifi/Kconfig"
291source "drivers/net/wireless/wl1251/Kconfig"
292source "drivers/net/wireless/wl12xx/Kconfig"
293source "drivers/net/wireless/zd1211rw/Kconfig"
294source "drivers/net/wireless/mwifiex/Kconfig"
295
296endif # WLAN
297