port.h revision 5553ba2be0f3e3741e1a885a33d2b89921f9fd48
1/*
2 * This file is provided under a dual BSD/GPLv2 license.  When using or
3 * redistributing this file, you may do so under either license.
4 *
5 * GPL LICENSE SUMMARY
6 *
7 * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved.
8 *
9 * This program is free software; you can redistribute it and/or modify
10 * it under the terms of version 2 of the GNU General Public License as
11 * published by the Free Software Foundation.
12 *
13 * This program is distributed in the hope that it will be useful, but
14 * WITHOUT ANY WARRANTY; without even the implied warranty of
15 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
16 * General Public License for more details.
17 *
18 * You should have received a copy of the GNU General Public License
19 * along with this program; if not, write to the Free Software
20 * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
21 * The full GNU General Public License is included in this distribution
22 * in the file called LICENSE.GPL.
23 *
24 * BSD LICENSE
25 *
26 * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved.
27 * All rights reserved.
28 *
29 * Redistribution and use in source and binary forms, with or without
30 * modification, are permitted provided that the following conditions
31 * are met:
32 *
33 *   * Redistributions of source code must retain the above copyright
34 *     notice, this list of conditions and the following disclaimer.
35 *   * Redistributions in binary form must reproduce the above copyright
36 *     notice, this list of conditions and the following disclaimer in
37 *     the documentation and/or other materials provided with the
38 *     distribution.
39 *   * Neither the name of Intel Corporation nor the names of its
40 *     contributors may be used to endorse or promote products derived
41 *     from this software without specific prior written permission.
42 *
43 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
44 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
45 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
46 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
47 * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
48 * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
49 * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
50 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
51 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
52 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
53 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
54 */
55
56#ifndef _ISCI_PORT_H_
57#define _ISCI_PORT_H_
58
59#include <scsi/libsas.h>
60#include "isci.h"
61#include "sas.h"
62#include "phy.h"
63
64#define SCIC_SDS_DUMMY_PORT   0xFF
65
66struct isci_phy;
67struct isci_host;
68
69enum isci_status {
70	isci_freed        = 0x00,
71	isci_starting     = 0x01,
72	isci_ready        = 0x02,
73	isci_ready_for_io = 0x03,
74	isci_stopping     = 0x04,
75	isci_stopped      = 0x05,
76};
77
78/**
79 * struct scic_sds_port
80 *
81 * The core port object provides the the abstraction for an SCU port.
82 */
83struct scic_sds_port {
84	/**
85	 * This field contains the information for the base port state machine.
86	 */
87	struct sci_base_state_machine state_machine;
88
89	bool ready_exit;
90
91	/**
92	 * This field is the port index that is reported to the SCI USER.
93	 * This allows the actual hardware physical port to change without
94	 * the SCI USER getting a different answer for the get port index.
95	 */
96	u8 logical_port_index;
97
98	/**
99	 * This field is the port index used to program the SCU hardware.
100	 */
101	u8 physical_port_index;
102
103	/**
104	 * This field contains the active phy mask for the port.
105	 * This mask is used in conjunction with the phy state to determine
106	 * which phy to select for some port operations.
107	 */
108	u8 active_phy_mask;
109
110	u16 reserved_rni;
111	u16 reserved_tci;
112
113	/**
114	 * This field contains the count of the io requests started on this port
115	 * object.  It is used to control controller shutdown.
116	 */
117	u32 started_request_count;
118
119	/**
120	 * This field contains the number of devices assigned to this port.
121	 * It is used to control port start requests.
122	 */
123	u32 assigned_device_count;
124
125	/**
126	 * This field contains the reason for the port not going ready.  It is
127	 * assigned in the state handlers and used in the state transition.
128	 */
129	u32 not_ready_reason;
130
131	/**
132	 * This field is the table of phys assigned to the port.
133	 */
134	struct scic_sds_phy *phy_table[SCI_MAX_PHYS];
135
136	/**
137	 * This field is a pointer back to the controller that owns this
138	 * port object.
139	 */
140	struct scic_sds_controller *owning_controller;
141
142	/* timer used for port start/stop operations */
143	struct sci_timer	timer;
144
145	/**
146	 * This field is the pointer to the port task scheduler registers
147	 * for the SCU hardware.
148	 */
149	struct scu_port_task_scheduler_registers __iomem
150		*port_task_scheduler_registers;
151
152	/**
153	 * This field is identical for all port objects and points to the port
154	 * task scheduler group PE configuration registers.
155	 * It is used to assign PEs to a port.
156	 */
157	u32 __iomem *port_pe_configuration_register;
158
159	/**
160	 * This field is the VIIT register space for ths port object.
161	 */
162	struct scu_viit_entry __iomem *viit_registers;
163};
164
165
166
167/**
168 * struct isci_port - This class represents the port object used to internally
169 *    represent libsas port objects. It also keeps a list of remote device
170 *    objects.
171 *
172 *
173 */
174struct isci_port {
175	enum isci_status status;
176	struct isci_host *isci_host;
177	struct asd_sas_port sas_port;
178	struct list_head remote_dev_list;
179	spinlock_t state_lock;
180	struct list_head domain_dev_list;
181	struct completion start_complete;
182	struct completion hard_reset_complete;
183	enum sci_status hard_reset_status;
184	struct scic_sds_port sci;
185};
186
187static inline struct isci_port *sci_port_to_iport(struct scic_sds_port *sci_port)
188{
189	struct isci_port *iport = container_of(sci_port, typeof(*iport), sci);
190
191	return iport;
192}
193
194enum scic_port_not_ready_reason_code {
195	SCIC_PORT_NOT_READY_NO_ACTIVE_PHYS,
196	SCIC_PORT_NOT_READY_HARD_RESET_REQUESTED,
197	SCIC_PORT_NOT_READY_INVALID_PORT_CONFIGURATION,
198	SCIC_PORT_NOT_READY_RECONFIGURING,
199
200	SCIC_PORT_NOT_READY_REASON_CODE_MAX
201};
202
203struct scic_port_end_point_properties {
204	struct sci_sas_address sas_address;
205	struct scic_phy_proto protocols;
206};
207
208struct scic_port_properties {
209	u32 index;
210	struct scic_port_end_point_properties local;
211	struct scic_port_end_point_properties remote;
212	u32 phy_mask;
213};
214
215/**
216 * enum scic_sds_port_states - This enumeration depicts all the states for the
217 *    common port state machine.
218 *
219 *
220 */
221enum scic_sds_port_states {
222	/**
223	 * This state indicates that the port has successfully been stopped.
224	 * In this state no new IO operations are permitted.
225	 * This state is entered from the STOPPING state.
226	 */
227	SCI_BASE_PORT_STATE_STOPPED,
228
229	/**
230	 * This state indicates that the port is in the process of stopping.
231	 * In this state no new IO operations are permitted, but existing IO
232	 * operations are allowed to complete.
233	 * This state is entered from the READY state.
234	 */
235	SCI_BASE_PORT_STATE_STOPPING,
236
237	/**
238	 * This state indicates the port is now ready.  Thus, the user is
239	 * able to perform IO operations on this port.
240	 * This state is entered from the STARTING state.
241	 */
242	SCI_BASE_PORT_STATE_READY,
243
244	/**
245	 * The substate where the port is started and ready but has no
246	 * active phys.
247	 */
248	SCIC_SDS_PORT_READY_SUBSTATE_WAITING,
249
250	/**
251	 * The substate where the port is started and ready and there is
252	 * at least one phy operational.
253	 */
254	SCIC_SDS_PORT_READY_SUBSTATE_OPERATIONAL,
255
256	/**
257	 * The substate where the port is started and there was an
258	 * add/remove phy event.  This state is only used in Automatic
259	 * Port Configuration Mode (APC)
260	 */
261	SCIC_SDS_PORT_READY_SUBSTATE_CONFIGURING,
262
263	/**
264	 * This state indicates the port is in the process of performing a hard
265	 * reset.  Thus, the user is unable to perform IO operations on this
266	 * port.
267	 * This state is entered from the READY state.
268	 */
269	SCI_BASE_PORT_STATE_RESETTING,
270
271	/**
272	 * This state indicates the port has failed a reset request.  This state
273	 * is entered when a port reset request times out.
274	 * This state is entered from the RESETTING state.
275	 */
276	SCI_BASE_PORT_STATE_FAILED,
277
278
279};
280
281/**
282 * scic_sds_port_get_controller() -
283 *
284 * Helper macro to get the owning controller of this port
285 */
286#define scic_sds_port_get_controller(this_port)	\
287	((this_port)->owning_controller)
288
289/**
290 * scic_sds_port_get_index() -
291 *
292 * This macro returns the physical port index for this port object
293 */
294#define scic_sds_port_get_index(this_port) \
295	((this_port)->physical_port_index)
296
297
298static inline void scic_sds_port_decrement_request_count(struct scic_sds_port *sci_port)
299{
300	if (WARN_ONCE(sci_port->started_request_count == 0,
301		       "%s: tried to decrement started_request_count past 0!?",
302			__func__))
303		/* pass */;
304	else
305		sci_port->started_request_count--;
306}
307
308#define scic_sds_port_active_phy(port, phy) \
309	(((port)->active_phy_mask & (1 << (phy)->phy_index)) != 0)
310
311void scic_sds_port_construct(
312	struct scic_sds_port *sci_port,
313	u8 port_index,
314	struct scic_sds_controller *scic);
315
316enum sci_status scic_sds_port_initialize(
317	struct scic_sds_port *sci_port,
318	void __iomem *port_task_scheduler_registers,
319	void __iomem *port_configuration_regsiter,
320	void __iomem *viit_registers);
321
322enum sci_status scic_sds_port_start(struct scic_sds_port *sci_port);
323enum sci_status scic_sds_port_stop(struct scic_sds_port *sci_port);
324
325enum sci_status scic_sds_port_add_phy(
326	struct scic_sds_port *sci_port,
327	struct scic_sds_phy *sci_phy);
328
329enum sci_status scic_sds_port_remove_phy(
330	struct scic_sds_port *sci_port,
331	struct scic_sds_phy *sci_phy);
332
333void scic_sds_port_setup_transports(
334	struct scic_sds_port *sci_port,
335	u32 device_id);
336
337
338void scic_sds_port_deactivate_phy(
339	struct scic_sds_port *sci_port,
340	struct scic_sds_phy *sci_phy,
341	bool do_notify_user);
342
343bool scic_sds_port_link_detected(
344	struct scic_sds_port *sci_port,
345	struct scic_sds_phy *sci_phy);
346
347enum sci_status scic_sds_port_link_up(struct scic_sds_port *sci_port,
348				      struct scic_sds_phy *sci_phy);
349enum sci_status scic_sds_port_link_down(struct scic_sds_port *sci_port,
350					struct scic_sds_phy *sci_phy);
351
352struct scic_sds_request;
353struct scic_sds_remote_device;
354enum sci_status scic_sds_port_start_io(
355	struct scic_sds_port *sci_port,
356	struct scic_sds_remote_device *sci_dev,
357	struct scic_sds_request *sci_req);
358
359enum sci_status scic_sds_port_complete_io(
360	struct scic_sds_port *sci_port,
361	struct scic_sds_remote_device *sci_dev,
362	struct scic_sds_request *sci_req);
363
364enum sas_linkrate scic_sds_port_get_max_allowed_speed(
365	struct scic_sds_port *sci_port);
366
367void scic_sds_port_broadcast_change_received(
368	struct scic_sds_port *sci_port,
369	struct scic_sds_phy *sci_phy);
370
371bool scic_sds_port_is_valid_phy_assignment(
372	struct scic_sds_port *sci_port,
373	u32 phy_index);
374
375void scic_sds_port_get_sas_address(
376	struct scic_sds_port *sci_port,
377	struct sci_sas_address *sas_address);
378
379void scic_sds_port_get_attached_sas_address(
380	struct scic_sds_port *sci_port,
381	struct sci_sas_address *sas_address);
382
383enum isci_status isci_port_get_state(
384	struct isci_port *isci_port);
385
386void isci_port_formed(struct asd_sas_phy *);
387void isci_port_deformed(struct asd_sas_phy *);
388
389void isci_port_init(
390	struct isci_port *port,
391	struct isci_host *host,
392	int index);
393
394int isci_port_perform_hard_reset(struct isci_host *ihost, struct isci_port *iport,
395				 struct isci_phy *iphy);
396#endif /* !defined(_ISCI_PORT_H_) */
397