Lines Matching defs:on
52 __le32 buf; /* Can't be pointer on (64-bit) hosts */
96 #define TXHI (TXQLEN - 256) /* turn on flow control above TXHI */
297 /* Bump up limit on waiting for HT to account for first startup;
529 bool rxflow; /* Is rx flow control on */
540 uint rx_hdrfail; /* SDIO errors on header reads */
544 uint fc_xoff; /* Number which turned on flow-control */
606 /* Limit on rounding up frames */
630 * adresses on the 32 bit backplane bus.
684 /* Turn backplane clock on or off */
685 static int brcmf_sdbrcm_htclk(struct brcmf_sdio *bus, bool on, bool pendok)
695 if (on) {
774 brcmf_dbg(ERROR, "HT Clock should be on\n");
806 static int brcmf_sdbrcm_sdclk(struct brcmf_sdio *bus, bool on)
810 if (on)
841 /* Now request HT Avail on the backplane */
1392 /* Terminate frame on error, request
1742 /* Give up on data, request rtx of events */
1813 brcmf_dbg(ERROR, "(nextlen): readahead on control packet %d?\n",
1970 /* Give up on data, request rtx of events */
2313 /* Force clocks on backplane to be sure F2 interrupt propagates */
2387 /* Read CSR, if clock on switch to AVAIL, else ignore */
2424 /* Make sure backplane clock is on */
2944 /* Make sure backplane clock is on */
3028 brcmf_dbg(CTL, "resumed on rxctl frame, got %d expected %d\n",
3031 brcmf_dbg(ERROR, "resumed on timeout\n");
3124 brcmf_dbg(ERROR, "error %d on reading %d nvram bytes at 0x%08x\n",
3259 brcmf_dbg(ERROR, "error %d on writing %d membytes at 0x%08x\n",
3449 /* Make sure backplane clock is on, needed to generate F2 interrupt */
3454 /* Force clocks on backplane to be sure F2 interrupt propagates */
3615 /* Make sure backplane clock is on */
3618 /* stop on error */
3748 /* Get info on the SOCRAM cores... */
3785 /* Disable F2 to clear any intermediate frame state on the dongle */