Lines Matching refs:serial
8 source "drivers/tty/serial/8250/Kconfig"
10 comment "Non-8250 serial port support"
13 tristate "ARM AMBA PL010 serial port support"
24 bool "Support for console on AMBA serial port"
40 tristate "ARM AMBA PL011 serial port support"
51 bool "Support for console on AMBA serial port"
67 tristate "BCM1xxx on-chip DUART serial support"
72 Support for the asynchronous serial interface (DUART) included in
82 bool "Support for console on a BCM1xxx DUART serial port"
87 If you say Y here, it will be possible to use a serial port as the
95 bool "AT91 / AT32 on-chip serial port support"
103 bool "Support for console on AT91 / AT32 serial port"
113 bool "Support DMA transfers on AT91 / AT32 serial port"
118 and from the Atmel AT91 / AT32 serial port. In order to
136 The ttySn nodes are legally reserved for the 8250 serial driver
137 but are often misused by other serial drivers.
145 bool "Micrel KS8695 (Centaur) serial port support"
152 bool "Support for console on KS8695 (Centaur) serial port"
162 tristate "CLPS711X serial port support"
169 bool "Support for console on CLPS711X serial port"
181 tristate "Samsung SoC serial support"
187 provide all of these ports, depending on how the serial port
205 serial driver
208 bool "Samsung SoC serial debug"
211 Add support for debugging the serial driver. Since this is
217 bool "Support for console on Samsung SoC serial port"
221 Allow selection of the S3C24XX on-board serial ports for use as
238 provide all of these ports, depending on how the serial port
242 bool "Support for console on SiRF SoC serial port"
268 bool "DECstation DZ serial driver"
273 DZ11-family serial controllers for DECstations and VAXstations,
277 bool "Support console on DECstation DZ serial driver"
282 If you say Y here, it will be possible to use a serial port as the
287 Note that the firmware uses ttyS3 as the serial console on
293 tristate "DECstation Z85C30 serial support"
298 Support for the Zilog 85C350 serial communications controller used
299 for serial ports in newer DECstation systems. These include the
307 bool "Support for console on a DECstation Z85C30 serial port"
312 If you say Y here, it will be possible to use a serial port as the
317 Note that the firmware uses ttyS1 as the serial console on the
323 tristate "DC21285 serial port support"
328 PCI bridge you can enable its onboard serial port by enabling this
332 bool "Console on DC21285 serial port"
336 If you have enabled the serial port on the 21285 footbridge you can
347 bool "Marvell MPSC serial port support"
351 Say Y here if you want to use the Marvell MPSC serial controller.
354 bool "Support for console on Marvell MPSC serial port"
358 Say Y here if you want to support a serial console on a Marvell MPSC.
361 bool "PXA serial port support"
366 can enable its onboard serial ports by enabling this option.
369 bool "Console on PXA serial port"
373 If you have enabled the serial port on the Intel XScale PXA
384 bool "SA1100 serial port support"
389 can enable its onboard serial port by enabling this option.
394 bool "Console on SA1100 serial port"
398 If you have enabled the serial port on the SA1100/SA1110 StrongARM
424 boolean "Medfile HSU serial console support"
429 tristate "Blackfin serial port support"
440 bool "Console on Blackfin serial port"
449 This driver supports the built-in serial ports of the Blackfin family
515 bool "IMX serial port support"
521 can enable its onboard serial port by enabling this option.
524 bool "Console on IMX serial port"
528 If you have enabled the serial port on the Motorola IMX
539 tristate "Xilinx uartlite serial port support"
543 Say Y here if you want to use the Xilinx uartlite serial controller.
549 bool "Support for console on Xilinx uartlite serial port"
565 tristate "Sun Zilog8530 serial support"
568 This driver supports the Zilog8530 serial ports found on many Sparc
569 systems. Say Y or M if you want to be able to these serial ports.
572 bool "Console on Sun Zilog8530 serial port"
575 If you would like to be able to use the Zilog8530 serial port
580 tristate "Sun SU serial support"
583 This driver supports the 8250 serial ports that run the keyboard and
585 to these serial ports.
588 bool "Console on Sun SU serial port"
591 If you would like to be able to use the SU serial port
601 Saying Y here will enable the hardware MUX serial driver for
615 bool "Support for console on serial MUX"
637 tristate "Sun Siemens SAB82532 serial support"
640 This driver supports the Siemens SAB82532 DUSCC serial ports on newer
642 serial ports.
645 bool "Console on Sun Siemens SAB82532 serial port"
648 If you would like to be able to use the SAB82532 serial port
660 tristate "SGI Zilog8530 serial support"
664 This driver supports the Zilog8530 serial ports found on SGI
665 systems. Say Y or M if you want to be able to these serial ports.
668 bool "Console on SGI Zilog8530 serial port"
673 tristate "SuperH SCI(F) serial port support"
678 int "Maximum number of SCI(F) serial ports"
697 and you want to use serial ports, say Y. Otherwise, say N.
700 bool "Enable PNX8XX0 serial console"
705 and you want to use serial console, say Y. Otherwise, say N.
717 bool "68328 serial support"
720 This driver supports the built-in serial port of the Motorola 68328
724 bool "Support RTS/CTS on 68328 serial port"
728 bool "Coldfire serial support"
732 This serial driver supports the Freescale Coldfire serial ports.
735 int "Default baudrate for Coldfire serial ports"
740 ColdFire serial ports. The usual default varies from board to board,
744 bool "Coldfire serial console support"
748 Enable a ColdFire internal serial port to be the system console.
755 This driver supports the Zilog z85C30 serial ports found on
757 Say Y or M if you want to be able to these serial ports.
765 8250 serial port driver also uses these numbers, which means
773 access the built-in serial ports on powermacs will need to
785 bool "Console on Mac or PowerMac z85c30 serial port"
789 If you would like to be able to use the z85c30 serial port
794 tristate "CPM SCC/SMC serial port support"
798 This driver supports the SCC and SMC serial ports on Motorola
802 bool "Support for console on CPM SCC/SMC serial port"
818 bool "SGI Altix L1 serial console support"
824 controller serial port as your console (you want this!),
828 tristate "Freescale MPC52xx/MPC512x family PSC serial support"
832 This driver supports MPC52xx and MPC512x PSC serial ports. If you would
838 bool "Console on a Freescale MPC52xx/MPC512x family PSC serial port"
842 Select this options if you'd like to use one of the PSC serial port
846 int "Freescale MPC52xx/MPC512x family PSC serial port baud"
860 This driver is for a family of multiport serial adapters
873 Say Y here if you want to use the M32R serial controller.
880 Say Y here if you want to support a serial console.
890 Say Y here if you want to use the M32R serial controller
916 bool "TX39XX/49XX SIO act as standard serial"
934 a console on a serial port, say Y. Otherwise, say N.
942 of cards which provide multiple serial ports. You would need
953 tristate "SGI IOC4 controller serial support"
958 and wish to use the serial ports on this card, say Y.
962 tristate "SGI Altix IOC3 serial support"
966 If you have an SGI Altix with an IOC3 serial card,
970 bool "MSM on-chip serial port support"
975 bool "MSM serial console support"
985 can enable its onboard high speed serial port by enabling
992 bool "VIA VT8500 on-chip serial port support"
997 bool "VIA VT8500 serial console support"
1002 tristate "NetX serial port support"
1007 can enable its onboard serial port by enabling this option.
1010 module will be called netx-serial.
1013 bool "Console on NetX serial port"
1017 If you have enabled the serial port on the Hilscher NetX SoC
1025 If you have a PowerPC based system that has serial ports
1031 tristate "OMAP serial port support"
1036 can enable its onboard serial ports by enabling this option.
1039 with the omap-serial driver. DMA support can be enabled from platform
1043 bool "Console on OMAP serial port"
1047 Select this option if you would like to use omap serial port as
1058 tristate "NWP serial port driver"
1064 This driver supports the cell network processor nwp serial
1068 bool "Console on NWP serial port"
1072 Support for Console on the NWP serial ports.
1075 bool "Lantiq serial driver"
1083 tristate "Freescale QUICC Engine serial port support"
1089 This driver supports the QE serial ports on Freescale embedded
1093 tristate "SC2681/SC2692 serial port support"
1097 This is a driver for the onboard serial ports of
1101 bool "Console on SC2681/SC2692 serial port"
1105 Support for Console on SC2681/SC2692 serial ports.
1177 tristate "bcm63xx serial port support"
1182 serial port by enabling this options.
1188 bool "Console on bcm63xx serial port"
1192 If you have enabled the serial port on the bcm63xx CPU
1196 tristate "GRLIB APBUART serial support"
1200 Add support for the GRLIB APBUART serial port.
1203 bool "Console on GRLIB APBUART serial port"
1328 bool "AR933X serial port support"
1336 bool "Console on AR933X serial port"
1343 int "Maximum number of AR933X serial ports"
1347 Set this to the number of serial ports you want the driver