Cross Reference: /drivers/usb/gadget/atmel_usba

Lines Matching defs:crq
1216 static inline bool feature_is_dev_remote_wakeup(struct usb_ctrlrequest *crq)
1218 	if (crq->wValue == cpu_to_le16(USB_DEVICE_REMOTE_WAKEUP))
1223 static inline bool feature_is_dev_test_mode(struct usb_ctrlrequest *crq)
1225 	if (crq->wValue == cpu_to_le16(USB_DEVICE_TEST_MODE))
1230 static inline bool feature_is_ep_halt(struct usb_ctrlrequest *crq)
1232 	if (crq->wValue == cpu_to_le16(USB_ENDPOINT_HALT))
1238 		struct usb_ctrlrequest *crq)
1242 	switch (crq->bRequest) {
1246 		if (crq->bRequestType == (USB_DIR_IN | USB_RECIP_DEVICE)) {
1248 		} else if (crq->bRequestType
1251 		} else if (crq->bRequestType
1255 			target = get_ep_by_addr(udc, le16_to_cpu(crq->wIndex));
1266 		if (crq->wLength != cpu_to_le16(sizeof(status)))
1275 		if (crq->bRequestType == USB_RECIP_DEVICE) {
1276 			if (feature_is_dev_remote_wakeup(crq))
1282 		} else if (crq->bRequestType == USB_RECIP_ENDPOINT) {
1285 			if (crq->wLength != cpu_to_le16(0)
1286 					|| !feature_is_ep_halt(crq))
1288 			target = get_ep_by_addr(udc, le16_to_cpu(crq->wIndex));
1305 		if (crq->bRequestType == USB_RECIP_DEVICE) {
1306 			if (feature_is_dev_test_mode(crq)) {
1309 				udc->test_mode = le16_to_cpu(crq->wIndex);
1311 			} else if (feature_is_dev_remote_wakeup(crq)) {
1316 		} else if (crq->bRequestType == USB_RECIP_ENDPOINT) {
1319 			if (crq->wLength != cpu_to_le16(0)
1320 					|| !feature_is_ep_halt(crq))
1323 			target = get_ep_by_addr(udc, le16_to_cpu(crq->wIndex));
1336 		if (crq->bRequestType != (USB_DIR_OUT | USB_RECIP_DEVICE))
1339 		set_address(udc, le16_to_cpu(crq->wValue));
1347 		retval = udc->driver->setup(&udc->gadget, crq);
1356 		ep->ep.name, crq->bRequestType, crq->bRequest,
1357 		le16_to_cpu(crq->wValue), le16_to_cpu(crq->wIndex),
1358 		le16_to_cpu(crq->wLength));
1465 			struct usb_ctrlrequest crq;
1467 		} crq;
1498 		if (pkt_len != sizeof(crq)) {
1500 				"(expected %zu)\n", pkt_len, sizeof(crq));
1506 		memcpy_fromio(crq.data, ep->fifo, sizeof(crq));
1513 			ep->state, crq.crq.bRequestType,
1514 			crq.crq.bRequest); */
1516 		if (crq.crq.bRequestType & USB_DIR_IN) {
1525 			if (crq.crq.wLength != cpu_to_le16(0))
1533 			ret = handle_ep0_setup(udc, ep, &crq.crq);
1536 			ret = udc->driver->setup(&udc->gadget, &crq.crq);
1541 			crq.crq.bRequestType, crq.crq.bRequest,
1542 			le16_to_cpu(crq.crq.wLength), ep->state, ret);