/drivers/media/video/uvc/ |
H A D | uvc_entity.c | 42 struct uvc_entity *remote; local 48 remote = uvc_entity_by_id(chain->dev, entity->baSourceID[i]); 49 if (remote == NULL) 52 source = (UVC_ENTITY_TYPE(remote) == UVC_TT_STREAMING) 53 ? (remote->vdev ? &remote->vdev->entity : NULL) 54 : &remote->subdev.entity; 58 remote_pad = remote->num_pads - 1;
|
/drivers/scsi/isci/ |
H A D | port.h | 142 struct sci_port_end_point_properties remote; member in struct:sci_port_properties
|
/drivers/block/drbd/ |
H A D | drbd_req.c | 76 * (local only or remote failed). 237 /* this is data_received (remote read) 357 /* now, check for overlapping requests with remote origin */ 364 dev_alert(DEV, "%s[%u] Concurrent remote write detected!" 472 /* no point in retrying if there is no good remote data, 527 /* otherwise we may lose an unplug, which may cause some remote 773 int local, remote, send_oos = 0; local 795 remote = 1; 811 remote = !local && mdev->state.pdsk >= D_UP_TO_DATE; 814 /* If we have a disk, but a READA request is mapped to remote, [all...] |
/drivers/input/misc/ |
H A D | keyspan_remote.c | 23 #define DRIVER_DESC "Driver for the USB Keyspan remote control." 35 /* Defines for converting the data from the remote. */ 94 /* Structure to store all the real stuff that a remote sends to us. */ 124 /* variables used to parse messages from remote. */ 133 * Debug routine that prints out what we've received from the remote. 176 static void keyspan_report_button(struct usb_keyspan *remote, int button, int press) argument 178 struct input_dev *input = remote->input; 181 input_report_key(input, remote->keymap[button], press); 186 * Routine that handles all the logic needed to parse out the message from the remote. 188 static void keyspan_check_data(struct usb_keyspan *remote) argument 405 struct usb_keyspan *remote = input_get_drvdata(dev); local 416 struct usb_keyspan *remote = input_get_drvdata(dev); local 446 struct usb_keyspan *remote; local 558 struct usb_keyspan *remote; local [all...] |
/drivers/misc/ibmasm/ |
H A D | ibmasm.h | 162 struct ibmasm_remote remote; member in struct:service_processor 203 /* remote console */
|
/drivers/media/video/omap3isp/ |
H A D | ispccp2.c | 971 * @remote : Pointer to remote pad array 977 const struct media_pad *remote, u32 flags) 982 switch (local->index | media_entity_type(remote->entity)) { 975 ccp2_link_setup(struct media_entity *entity, const struct media_pad *local, const struct media_pad *remote, u32 flags) argument
|
H A D | ispcsi2.c | 1131 * @remote : Pointer to remote pad array 1137 const struct media_pad *remote, u32 flags) 1148 switch (local->index | media_entity_type(remote->entity)) { 1135 csi2_link_setup(struct media_entity *entity, const struct media_pad *local, const struct media_pad *remote, u32 flags) argument
|
H A D | ispvideo.c | 230 struct media_pad *remote; local 232 remote = media_entity_remote_source(&video->pad); 234 if (remote == NULL || 235 media_entity_type(remote->entity) != MEDIA_ENT_T_V4L2_SUBDEV) 239 *pad = remote->index; 241 return media_entity_to_v4l2_subdev(remote->entity);
|
H A D | ispccdc.c | 2066 * @remote: Pad at the remote end of the link 2073 const struct media_pad *remote, u32 flags) 2079 switch (local->index | media_entity_type(remote->entity)) { 2092 if (remote->entity == &isp->isp_ccp2.subdev.entity) 2094 else if (remote->entity == &isp->isp_csi2a.subdev.entity) 2096 else if (remote->entity == &isp->isp_csi2c.subdev.entity) 2071 ccdc_link_setup(struct media_entity *entity, const struct media_pad *local, const struct media_pad *remote, u32 flags) argument
|
H A D | ispresizer.c | 1556 * @remote : Pointer to remote pad array 1562 const struct media_pad *remote, u32 flags) 1567 switch (local->index | media_entity_type(remote->entity)) { 1560 resizer_link_setup(struct media_entity *entity, const struct media_pad *local, const struct media_pad *remote, u32 flags) argument
|
H A D | isppreview.c | 2006 * @remote : Pointer to remote pad array 2012 const struct media_pad *remote, u32 flags) 2017 switch (local->index | media_entity_type(remote->entity)) { 2010 preview_link_setup(struct media_entity *entity, const struct media_pad *local, const struct media_pad *remote, u32 flags) argument
|
/drivers/media/dvb/dvb-usb/ |
H A D | Makefile | 1 dvb-usb-objs = dvb-usb-firmware.o dvb-usb-init.o dvb-usb-urb.o dvb-usb-i2c.o dvb-usb-dvb.o dvb-usb-remote.o usb-urb.o 60 dvb-usb-af9005-remote-objs = af9005-remote.o 61 obj-$(CONFIG_DVB_USB_AF9005_REMOTE) += dvb-usb-af9005-remote.o
|
/drivers/media/video/s5p-fimc/ |
H A D | fimc-capture.c | 1176 const struct media_pad *remote, u32 flags) 1181 if (media_entity_type(remote->entity) != MEDIA_ENT_T_V4L2_SUBDEV) 1188 local->entity->name, remote->entity->name, flags, 1174 fimc_link_setup(struct media_entity *entity, const struct media_pad *local, const struct media_pad *remote, u32 flags) argument
|
/drivers/net/fddi/skfp/ |
H A D | pcmplc.c | 914 /* check for remote LCT failure */ 1383 phy->phy_name,phy->t_val[7]? "local":"remote") ; 1605 * remote phy type 1606 * remote mac yes/no 1609 int *remote, int *mac) 1616 /* remote PHY type and MAC - set only if active */ 1620 *remote = mib->fddiPORTNeighborType ; 1608 pcm_status_state(struct s_smc *smc, int np, int *type, int *state, int *remote, int *mac) argument
|
/drivers/media/video/bt8xx/ |
H A D | bttv-cards.c | 102 static unsigned int remote[BTTV_MAX] = { [ 0 ... (BTTV_MAX-1) ] = UNSET }; variable 124 module_param_array(remote, int, NULL, 0444); 1566 .gpiomask = 0x1C800F, /* Bit0-2: Audio select, 8-12:remote control 14:remote valid 15:remote reset */ 1950 - Other chips: em78p156elp @ 0x96 (probably IR remote control) 2305 /* Based on the Nebula card data - added remote and new card number - BTTV_BOARD_AVDVBT_761, see also ir-kbd-gpio.c */ 2657 * stuffs up remote chip. Bug is a pin on the jaecs is not set 3014 * lowest 3 bytes are remote control codes (no handshake needed) 3015 * xxxFFF: No remote contro [all...] |
H A D | bttvp.h | 341 /* for gpio-connected remote control */ 402 /* infrared remote */ 404 struct bttv_ir *remote; member in struct:bttv 406 /* I2C remote data */
|
/drivers/net/ethernet/broadcom/ |
H A D | b44.c | 364 static void b44_set_flow_ctrl(struct b44 *bp, u32 local, u32 remote) argument 375 if ((remote & LPA_PAUSE_ASYM) && 376 !(remote & LPA_PAUSE_CAP))
|
H A D | cnic_if.h | 220 } remote; member in struct:cnic_sockaddr
|
/drivers/media/video/saa7134/ |
H A D | saa7134.h | 340 /* Since we support 2 remote types, lets tell them apart */ 557 /* infrared remote */ 559 struct saa7134_card_ir *remote; member in struct:saa7134_dev
|
/drivers/net/ethernet/micrel/ |
H A D | ksz884x.c | 3242 u16 local, u16 remote) 3253 if (remote & PHY_AUTO_NEG_SYM_PAUSE) { 3256 } else if ((remote & PHY_AUTO_NEG_ASYM_PAUSE) && 3261 } else if (remote & PHY_AUTO_NEG_ASYM_PAUSE) { 3300 u8 remote; local 3316 remote = status & (PORT_AUTO_NEG_COMPLETE | 3321 if (local == info->advertised && remote == info->partner) 3325 info->partner = remote; 3241 determine_flow_ctrl(struct ksz_hw *hw, struct ksz_port *port, u16 local, u16 remote) argument
|