/drivers/staging/keucr/ |
H A D | smilmain.c | 204 return(ERROR); 541 // MediaChange=ERROR; 550 // MediaChange=ERROR; 568 // default: *c= 0; *h= 0; *s= 0; ErrCode = ERR_NoSmartMedia; return(ERROR); 579 // MediaChange = ERROR; 595 // MediaChange = ERROR; 604 // MediaChange = ERROR; 605 // return(ERROR); 611 // MediaChange = ERROR; 612 // return(ERROR); [all...] |
H A D | smcommon.h | 10 #define ERROR 0xFFFF /* ERROR */ macro 14 #define NO_ERROR 0x0000 /* NO ERROR */
|
H A D | smilsub.c | 62 return ERROR; 75 return ERROR; 77 return ERROR; 91 return ERROR; 96 return ERROR; 116 return ERROR; 130 return ERROR; 195 return ERROR; 611 return ERROR; 683 return ERROR; [all...] |
/drivers/net/wireless/rt2x00/ |
H A D | rt2x00firmware.c | 45 ERROR(rt2x00dev, 55 ERROR(rt2x00dev, "Failed to request Firmware.\n"); 60 ERROR(rt2x00dev, "Failed to read Firmware.\n"); 76 ERROR(rt2x00dev, "Firmware checksum error.\n"); 79 ERROR(rt2x00dev, 83 ERROR(rt2x00dev,
|
H A D | rt2x00pci.c | 55 ERROR(rt2x00dev, "Indirect register access failed: " 179 ERROR(rt2x00dev, "IRQ %d allocation failed (error %d).\n", 377 ERROR(rt2x00dev, "Failed to resume device.\n");
|
H A D | rt2x00queue.c | 503 ERROR(rt2x00dev, 627 ERROR(queue->rt2x00dev, 637 ERROR(queue->rt2x00dev, 766 ERROR(queue->rt2x00dev, 815 ERROR(queue->rt2x00dev, 836 ERROR(queue->rt2x00dev, 1186 ERROR(rt2x00dev, "Queue entries allocation failed.\n"); 1238 ERROR(rt2x00dev, "Queue allocation failed.\n");
|
/drivers/net/wireless/brcm80211/brcmfmac/ |
H A D | usb.c | 286 brcmf_dbg(ERROR, "Could not Resume the bus!\n"); 307 brcmf_dbg(ERROR, "usb_submit_urb failed %d\n", ret); 348 brcmf_dbg(ERROR, "usb_submit_urb failed %d\n", ret); 370 brcmf_dbg(ERROR, "fail %d bytes: %d\n", err, len); 379 brcmf_dbg(ERROR, "Txctl wait timed out\n"); 401 brcmf_dbg(ERROR, "fail %d bytes: %d\n", err, len); 410 brcmf_dbg(ERROR, "rxctl wait timed out\n"); 453 brcmf_dbg(ERROR, "fail to allocate memory!\n"); 469 brcmf_dbg(ERROR, "fail!\n"); 486 brcmf_dbg(ERROR, "ba [all...] |
H A D | dhd_common.c | 125 brcmf_dbg(ERROR, "brcmu_pktq_penq() failed, oldest %d\n", 134 brcmf_dbg(ERROR, "brcmu_pktq_penq() failed\n"); 370 brcmf_dbg(ERROR, 385 brcmf_dbg(ERROR, 393 brcmf_dbg(ERROR, "WLC_E_TRACE: [Event lost --> seqnum " 451 brcmf_dbg(ERROR, "mismatched OUI, bailing\n"); 458 brcmf_dbg(ERROR, "mismatched subtype, bailing\n"); 487 brcmf_dbg(ERROR, "Invalid ifidx %d for %s\n", 536 brcmf_dbg(ERROR, "Mask invalid format. Needs to start with 0x\n"); 541 brcmf_dbg(ERROR, "Mas [all...] |
H A D | bcmsdh_sdmmc.c | 97 brcmf_dbg(ERROR, 104 brcmf_dbg(ERROR, 121 brcmf_dbg(ERROR, "F0 Wr:0x%02x: write disallowed\n", regaddr); 162 brcmf_dbg(ERROR, "Failed to %s byte F%d:@0x%05x=%02x, Err: %d\n", 175 brcmf_dbg(ERROR, "Only CMD52 allowed to F0\n"); 196 brcmf_dbg(ERROR, "Invalid nbytes: %d\n", nbytes); 204 brcmf_dbg(ERROR, "Invalid nbytes: %d\n", nbytes); 211 brcmf_dbg(ERROR, "Failed to %s word, Err: 0x%08x\n", 274 brcmf_dbg(ERROR, "%s FAILED %p[%d], addr=0x%05x, pkt_len=%d, ERR=0x%08x\n", 325 brcmf_dbg(ERROR, " [all...] |
H A D | dhd_linux.c | 91 brcmf_dbg(ERROR, "ifidx %d out of range\n", ifidx); 96 brcmf_dbg(ERROR, "null i/f %d\n", ifidx); 158 brcmf_dbg(ERROR, "%s: set mcast_list failed, cnt %d\n", 180 brcmf_dbg(ERROR, "%s: mkiovar failed for allmulti, datalen %d buflen %u\n", 195 brcmf_dbg(ERROR, "%s: set allmulti %d failed\n", 216 brcmf_dbg(ERROR, "%s: set promisc %d failed\n", 235 brcmf_dbg(ERROR, "%s: mkiovar failed for cur_etheraddr\n", 247 brcmf_dbg(ERROR, "%s: set cur_etheraddr failed\n", 310 brcmf_dbg(ERROR, "xmit rejected drvup=%d state=%d\n", 318 brcmf_dbg(ERROR, "ba [all...] |
H A D | dhd_sdio.c | 646 brcmf_dbg(ERROR, "FAILED READ %Xh\n", reg_offset); 666 brcmf_dbg(ERROR, "FAILED REGISTER WRITE %Xh\n", 703 brcmf_dbg(ERROR, "HT Avail request error: %d\n", err); 711 brcmf_dbg(ERROR, "HT Avail read error: %d\n", err); 722 brcmf_dbg(ERROR, "Devctl error setting CA: %d\n", 758 brcmf_dbg(ERROR, "HT Avail request error: %d\n", err); 762 brcmf_dbg(ERROR, "HT Avail timeout (%d): clkctl 0x%02x\n", 774 brcmf_dbg(ERROR, "HT Clock should be on\n"); 797 brcmf_dbg(ERROR, "Failed access turning clock off: %d\n", 854 brcmf_dbg(ERROR, "reques [all...] |
H A D | dhd_cdc.c | 184 brcmf_dbg(ERROR, "brcmf_proto_cdc_msg failed w/status %d\n", 201 brcmf_dbg(ERROR, "%s: unexpected request id %d (expected %d)\n", 217 /* Check the ERROR flag */ 263 brcmf_dbg(ERROR, "%s: unexpected request id %d (expected %d)\n", 269 /* Check the ERROR flag */ 288 brcmf_dbg(ERROR, "bus is down. we have nothing to do.\n"); 395 brcmf_dbg(ERROR, "rx data too short (%d < %d)\n", 404 brcmf_dbg(ERROR, "rx data ifnum out of range (%d)\n", *ifidx); 410 brcmf_dbg(ERROR, "%s: non-BDC packet received, flags 0x%x\n", 438 brcmf_dbg(ERROR, "struc [all...] |
H A D | bcmsdh.c | 190 brcmf_dbg(ERROR, "error reading addr 0x%04x size %d\n", addr, size); 223 brcmf_dbg(ERROR, "error writing 0x%08x to addr 0x%04x size %d\n", 268 brcmf_dbg(ERROR, "brcmu_pkt_buf_get_skb failed: len %d\n", 335 brcmf_dbg(ERROR, "brcmu_pkt_buf_get_skb failed: len %d\n", 395 brcmf_dbg(ERROR, "brcmu_pkt_buf_get_skb failed: len %d\n", 445 brcmf_dbg(ERROR, "device attach failed\n");
|
H A D | sdio_chip.c | 187 brcmf_dbg(ERROR, "core state still busy\n"); 398 brcmf_dbg(ERROR, "chipid 0x%x is not supported\n", ci->chip); 416 brcmf_dbg(ERROR, "socitype %u not supported\n", ci->socitype); 434 brcmf_dbg(ERROR, "error writing for HT off\n"); 444 brcmf_dbg(ERROR, "ChipClkCSR access: wrote 0x%02x read 0x%02x\n", 454 brcmf_dbg(ERROR, "timeout on ALPAV wait, clkval 0x%02x\n", 576 brcmf_dbg(ERROR, "No SDIO Drive strength init done for chip %s rev %d pmurev %d\n",
|
/drivers/usb/gadget/ |
H A D | u_uac1.c | 146 ERROR(snd->card, 185 ERROR(card, "Preparing sound card failed: %d\n", 196 ERROR(card, "Playback error: %d\n", (int)result); 232 ERROR(card, "unable to open sound control device file: %s\n", 243 ERROR(card, "No such PCM playback device: %s\n", fn_play); 255 ERROR(card, "No such PCM capture device: %s\n", fn_cap); 307 ERROR(card, "we need at least one control device\n");
|
H A D | f_hid.c | 180 ERROR(hidg->func.config->cdev, 181 "End Point Request ERROR: %d\n", req->status); 218 ERROR(hidg->func.config->cdev, 233 ERROR(hidg->func.config->cdev, 290 ERROR(hidg->func.config->cdev, "%s FAILED\n", __func__); 399 ERROR(cdev, "usb_ep_queue error on ep0 %d\n", value); 427 ERROR(cdev, "config_ep_by_speed FAILED!\n"); 432 ERROR(cdev, "Enable endpoint FAILED!\n"); 525 ERROR(f->config->cdev, "hidg_bind FAILED\n");
|
H A D | f_loopback.c | 192 ERROR(cdev, "%s: can't autoconfigure on %s\n", 252 ERROR(cdev, "can't loop %s to %s: %d\n", 267 ERROR(cdev, "%s loop complete --> %d, %d/%d\n", ep->name, 337 ERROR(cdev, "%s queue req --> %d\n",
|
H A D | f_midi.c | 298 ERROR(cdev, "kill %s: resubmit %d bytes --> %d\n", 317 ERROR(cdev, "can't configure %s: %d\n", ep->name, err); 323 ERROR(cdev, "can't start %s: %d\n", ep->name, err); 352 ERROR(cdev, "can't configure %s: %d\n", 359 ERROR(cdev, "can't start %s: %d\n", 376 ERROR(midi, "%s queue req: %d\n", 553 ERROR(midi, "gmidi_transmit: alloc_ep_request failed\n"); 678 ERROR(midi, "snd_card_create() failed\n"); 685 ERROR(midi, "snd_device_new() failed: error %d\n", err); 698 ERROR(mid [all...] |
H A D | f_sourcesink.c | 205 ERROR(cdev, "%s: can't autoconfigure on %s\n", 275 ERROR(cdev, "bad OUT byte, buf[%d] = %d\n", i, *buf); 340 ERROR(cdev, "kill %s: resubmit %d bytes --> %d\n", 369 ERROR(cdev, "start %s %s --> %d\n", 539 ERROR(c->cdev, "source/sinkc response, err %d\n",
|
H A D | audio.c | 159 ERROR(cdev, "controller '%s' not recognized; trying %s\n",
|
/drivers/staging/comedi/drivers/ |
H A D | comedi_bond.c | 81 #define ERROR(x...) printk(KERN_ERR MODULE_NAME ": INTERNAL ERROR: "x) macro 384 ERROR("Minor %d is invalid!\n", minor); 388 ERROR("Cannot bond this driver to itself!\n"); 392 ERROR("Minor %d specified more than once!\n", minor); 402 ERROR("Minor %u could not be opened\n", minor); 411 ERROR("comedi_get_n_channels() returned %d " 418 ERROR("Out of memory.\n"); 441 ERROR("Could not allocate memory. " 462 ERROR("N [all...] |
/drivers/net/wireless/bcmdhd/include/ |
H A D | bcmsdspi.h | 50 #undef ERROR macro 51 #define ERROR 1 macro
|
H A D | bcmsdh_sdmmc.h | 60 #define ERROR 1 macro
|
/drivers/mtd/devices/ |
H A D | block2mtd.c | 21 #define ERROR(fmt, args...) printk(KERN_ERR "block2mtd: " fmt "\n" , ## args) macro 88 ERROR("erase failed err = %d", err); 246 ERROR("error: cannot open device %s", devname); 252 ERROR("attempting to use an MTD device as a block device"); 347 ERROR(fmt, ## args); \
|
/drivers/usb/misc/ |
H A D | usbtest.c | 81 #define ERROR(tdev, fmt, args...) \ macro 284 ERROR(tdev, "guard byte[%d] %d (not %d)\n", 324 ERROR(tdev, "buf[%d] = %d (not %d)\n", i, *buf, expected); 498 ERROR(tdev, "perform_sglist failed, " 570 ERROR(tdev, "bogus config descriptor length\n"); 575 ERROR(tdev, "high bit of config attributes not set\n"); 579 ERROR(tdev, "reserved config bits set\n"); 591 ERROR(tdev, "bogus config descriptor read size\n"); 807 ERROR(ctx->dev, 833 ERROR(ct [all...] |