mach-smdkv210.c revision bb3a4ebe63194a41b7d4420cbc26732e15aa8242 
1/* linux/arch/arm/mach-s5pv210/mach-smdkv210.c
2 *
3 * Copyright (c) 2010 Samsung Electronics Co., Ltd.
4 *		http://www.samsung.com/
5 *
6 * This program is free software; you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License version 2 as
8 * published by the Free Software Foundation.
9*/
10
11#include <linux/kernel.h>
12#include <linux/types.h>
13#include <linux/i2c.h>
14#include <linux/init.h>
15#include <linux/serial_core.h>
16#include <linux/sysdev.h>
17#include <linux/dm9000.h>
18#include <linux/fb.h>
19#include <linux/gpio.h>
20#include <linux/delay.h>
21#include <linux/pwm_backlight.h>
22
23#include <asm/hardware/vic.h>
24#include <asm/mach/arch.h>
25#include <asm/mach/map.h>
26#include <asm/setup.h>
27#include <asm/mach-types.h>
28
29#include <video/platform_lcd.h>
30
31#include <mach/map.h>
32#include <mach/regs-clock.h>
33
34#include <plat/regs-serial.h>
35#include <plat/regs-srom.h>
36#include <plat/gpio-cfg.h>
37#include <plat/s5pv210.h>
38#include <plat/devs.h>
39#include <plat/cpu.h>
40#include <plat/adc.h>
41#include <plat/ts.h>
42#include <plat/ata.h>
43#include <plat/iic.h>
44#include <plat/keypad.h>
45#include <plat/pm.h>
46#include <plat/fb.h>
47#include <plat/s5p-time.h>
48#include <plat/backlight.h>
49#include <plat/regs-fb-v4.h>
50
51/* Following are default values for UCON, ULCON and UFCON UART registers */
52#define SMDKV210_UCON_DEFAULT	(S3C2410_UCON_TXILEVEL |	\
53				 S3C2410_UCON_RXILEVEL |	\
54				 S3C2410_UCON_TXIRQMODE |	\
55				 S3C2410_UCON_RXIRQMODE |	\
56				 S3C2410_UCON_RXFIFO_TOI |	\
57				 S3C2443_UCON_RXERR_IRQEN)
58
59#define SMDKV210_ULCON_DEFAULT	S3C2410_LCON_CS8
60
61#define SMDKV210_UFCON_DEFAULT	(S3C2410_UFCON_FIFOMODE |	\
62				 S5PV210_UFCON_TXTRIG4 |	\
63				 S5PV210_UFCON_RXTRIG4)
64
65static struct s3c2410_uartcfg smdkv210_uartcfgs[] __initdata = {
66	[0] = {
67		.hwport		= 0,
68		.flags		= 0,
69		.ucon		= SMDKV210_UCON_DEFAULT,
70		.ulcon		= SMDKV210_ULCON_DEFAULT,
71		.ufcon		= SMDKV210_UFCON_DEFAULT,
72	},
73	[1] = {
74		.hwport		= 1,
75		.flags		= 0,
76		.ucon		= SMDKV210_UCON_DEFAULT,
77		.ulcon		= SMDKV210_ULCON_DEFAULT,
78		.ufcon		= SMDKV210_UFCON_DEFAULT,
79	},
80	[2] = {
81		.hwport		= 2,
82		.flags		= 0,
83		.ucon		= SMDKV210_UCON_DEFAULT,
84		.ulcon		= SMDKV210_ULCON_DEFAULT,
85		.ufcon		= SMDKV210_UFCON_DEFAULT,
86	},
87	[3] = {
88		.hwport		= 3,
89		.flags		= 0,
90		.ucon		= SMDKV210_UCON_DEFAULT,
91		.ulcon		= SMDKV210_ULCON_DEFAULT,
92		.ufcon		= SMDKV210_UFCON_DEFAULT,
93	},
94};
95
96static struct s3c_ide_platdata smdkv210_ide_pdata __initdata = {
97	.setup_gpio	= s5pv210_ide_setup_gpio,
98};
99
100static uint32_t smdkv210_keymap[] __initdata = {
101	/* KEY(row, col, keycode) */
102	KEY(0, 3, KEY_1), KEY(0, 4, KEY_2), KEY(0, 5, KEY_3),
103	KEY(0, 6, KEY_4), KEY(0, 7, KEY_5),
104	KEY(1, 3, KEY_A), KEY(1, 4, KEY_B), KEY(1, 5, KEY_C),
105	KEY(1, 6, KEY_D), KEY(1, 7, KEY_E)
106};
107
108static struct matrix_keymap_data smdkv210_keymap_data __initdata = {
109	.keymap		= smdkv210_keymap,
110	.keymap_size	= ARRAY_SIZE(smdkv210_keymap),
111};
112
113static struct samsung_keypad_platdata smdkv210_keypad_data __initdata = {
114	.keymap_data	= &smdkv210_keymap_data,
115	.rows		= 8,
116	.cols		= 8,
117};
118
119static struct resource smdkv210_dm9000_resources[] = {
120	[0] = {
121		.start	= S5PV210_PA_SROM_BANK5,
122		.end	= S5PV210_PA_SROM_BANK5,
123		.flags	= IORESOURCE_MEM,
124	},
125	[1] = {
126		.start	= S5PV210_PA_SROM_BANK5 + 2,
127		.end	= S5PV210_PA_SROM_BANK5 + 2,
128		.flags	= IORESOURCE_MEM,
129	},
130	[2] = {
131		.start	= IRQ_EINT(9),
132		.end	= IRQ_EINT(9),
133		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
134	},
135};
136
137static struct dm9000_plat_data smdkv210_dm9000_platdata = {
138	.flags		= DM9000_PLATF_16BITONLY | DM9000_PLATF_NO_EEPROM,
139	.dev_addr	= { 0x00, 0x09, 0xc0, 0xff, 0xec, 0x48 },
140};
141
142struct platform_device smdkv210_dm9000 = {
143	.name		= "dm9000",
144	.id		= -1,
145	.num_resources	= ARRAY_SIZE(smdkv210_dm9000_resources),
146	.resource	= smdkv210_dm9000_resources,
147	.dev		= {
148		.platform_data	= &smdkv210_dm9000_platdata,
149	},
150};
151
152static void smdkv210_lte480wv_set_power(struct plat_lcd_data *pd,
153					unsigned int power)
154{
155	if (power) {
156#if !defined(CONFIG_BACKLIGHT_PWM)
157		gpio_request(S5PV210_GPD0(3), "GPD0");
158		gpio_direction_output(S5PV210_GPD0(3), 1);
159		gpio_free(S5PV210_GPD0(3));
160#endif
161
162		/* fire nRESET on power up */
163		gpio_request(S5PV210_GPH0(6), "GPH0");
164
165		gpio_direction_output(S5PV210_GPH0(6), 1);
166
167		gpio_set_value(S5PV210_GPH0(6), 0);
168		mdelay(10);
169
170		gpio_set_value(S5PV210_GPH0(6), 1);
171		mdelay(10);
172
173		gpio_free(S5PV210_GPH0(6));
174	} else {
175#if !defined(CONFIG_BACKLIGHT_PWM)
176		gpio_request(S5PV210_GPD0(3), "GPD0");
177		gpio_direction_output(S5PV210_GPD0(3), 0);
178		gpio_free(S5PV210_GPD0(3));
179#endif
180	}
181}
182
183static struct plat_lcd_data smdkv210_lcd_lte480wv_data = {
184	.set_power	= smdkv210_lte480wv_set_power,
185};
186
187static struct platform_device smdkv210_lcd_lte480wv = {
188	.name			= "platform-lcd",
189	.dev.parent		= &s3c_device_fb.dev,
190	.dev.platform_data	= &smdkv210_lcd_lte480wv_data,
191};
192
193static struct s3c_fb_pd_win smdkv210_fb_win0 = {
194	.win_mode = {
195		.left_margin	= 13,
196		.right_margin	= 8,
197		.upper_margin	= 7,
198		.lower_margin	= 5,
199		.hsync_len	= 3,
200		.vsync_len	= 1,
201		.xres		= 800,
202		.yres		= 480,
203	},
204	.max_bpp	= 32,
205	.default_bpp	= 24,
206};
207
208static struct s3c_fb_platdata smdkv210_lcd0_pdata __initdata = {
209	.win[0]		= &smdkv210_fb_win0,
210	.vidcon0	= VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB,
211	.vidcon1	= VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
212	.setup_gpio	= s5pv210_fb_gpio_setup_24bpp,
213};
214
215static struct platform_device *smdkv210_devices[] __initdata = {
216	&s3c_device_adc,
217	&s3c_device_cfcon,
218	&s3c_device_fb,
219	&s3c_device_hsmmc0,
220	&s3c_device_hsmmc1,
221	&s3c_device_hsmmc2,
222	&s3c_device_hsmmc3,
223	&s3c_device_i2c0,
224	&s3c_device_i2c1,
225	&s3c_device_i2c2,
226	&s3c_device_rtc,
227	&s3c_device_ts,
228	&s3c_device_wdt,
229	&s5pv210_device_ac97,
230	&s5pv210_device_iis0,
231	&s5pv210_device_spdif,
232	&samsung_asoc_dma,
233	&samsung_asoc_idma,
234	&samsung_device_keypad,
235	&smdkv210_dm9000,
236	&smdkv210_lcd_lte480wv,
237};
238
239static void __init smdkv210_dm9000_init(void)
240{
241	unsigned int tmp;
242
243	gpio_request(S5PV210_MP01(5), "nCS5");
244	s3c_gpio_cfgpin(S5PV210_MP01(5), S3C_GPIO_SFN(2));
245	gpio_free(S5PV210_MP01(5));
246
247	tmp = (5 << S5P_SROM_BCX__TACC__SHIFT);
248	__raw_writel(tmp, S5P_SROM_BC5);
249
250	tmp = __raw_readl(S5P_SROM_BW);
251	tmp &= (S5P_SROM_BW__CS_MASK << S5P_SROM_BW__NCS5__SHIFT);
252	tmp |= (1 << S5P_SROM_BW__NCS5__SHIFT);
253	__raw_writel(tmp, S5P_SROM_BW);
254}
255
256static struct i2c_board_info smdkv210_i2c_devs0[] __initdata = {
257	{ I2C_BOARD_INFO("24c08", 0x50), },     /* Samsung S524AD0XD1 */
258	{ I2C_BOARD_INFO("wm8580", 0x1b), },
259};
260
261static struct i2c_board_info smdkv210_i2c_devs1[] __initdata = {
262	/* To Be Updated */
263};
264
265static struct i2c_board_info smdkv210_i2c_devs2[] __initdata = {
266	/* To Be Updated */
267};
268
269/* LCD Backlight data */
270static struct samsung_bl_gpio_info smdkv210_bl_gpio_info = {
271	.no = S5PV210_GPD0(3),
272	.func = S3C_GPIO_SFN(2),
273};
274
275static struct platform_pwm_backlight_data smdkv210_bl_data = {
276	.pwm_id = 3,
277};
278
279static void __init smdkv210_map_io(void)
280{
281	s5p_init_io(NULL, 0, S5P_VA_CHIPID);
282	s3c24xx_init_clocks(24000000);
283	s3c24xx_init_uarts(smdkv210_uartcfgs, ARRAY_SIZE(smdkv210_uartcfgs));
284	s5p_set_timer_source(S5P_PWM2, S5P_PWM4);
285}
286
287static void __init smdkv210_machine_init(void)
288{
289	s3c_pm_init();
290
291	smdkv210_dm9000_init();
292
293	samsung_keypad_set_platdata(&smdkv210_keypad_data);
294	s3c24xx_ts_set_platdata(NULL);
295
296	s3c_i2c0_set_platdata(NULL);
297	s3c_i2c1_set_platdata(NULL);
298	s3c_i2c2_set_platdata(NULL);
299	i2c_register_board_info(0, smdkv210_i2c_devs0,
300			ARRAY_SIZE(smdkv210_i2c_devs0));
301	i2c_register_board_info(1, smdkv210_i2c_devs1,
302			ARRAY_SIZE(smdkv210_i2c_devs1));
303	i2c_register_board_info(2, smdkv210_i2c_devs2,
304			ARRAY_SIZE(smdkv210_i2c_devs2));
305
306	s3c_ide_set_platdata(&smdkv210_ide_pdata);
307
308	s3c_fb_set_platdata(&smdkv210_lcd0_pdata);
309
310	samsung_bl_set(&smdkv210_bl_gpio_info, &smdkv210_bl_data);
311
312	platform_add_devices(smdkv210_devices, ARRAY_SIZE(smdkv210_devices));
313}
314
315MACHINE_START(SMDKV210, "SMDKV210")
316	/* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */
317	.atag_offset	= 0x100,
318	.init_irq	= s5pv210_init_irq,
319	.handle_irq	= vic_handle_irq,
320	.map_io		= smdkv210_map_io,
321	.init_machine	= smdkv210_machine_init,
322	.timer		= &s5p_timer,
323MACHINE_END
324