1/* 2 * P1010 RDB Device Tree Source stub (no addresses or top-level ranges) 3 * 4 * Copyright 2011 Freescale Semiconductor Inc. 5 * 6 * Redistribution and use in source and binary forms, with or without 7 * modification, are permitted provided that the following conditions are met: 8 * * Redistributions of source code must retain the above copyright 9 * notice, this list of conditions and the following disclaimer. 10 * * Redistributions in binary form must reproduce the above copyright 11 * notice, this list of conditions and the following disclaimer in the 12 * documentation and/or other materials provided with the distribution. 13 * * Neither the name of Freescale Semiconductor nor the 14 * names of its contributors may be used to endorse or promote products 15 * derived from this software without specific prior written permission. 16 * 17 * 18 * ALTERNATIVELY, this software may be distributed under the terms of the 19 * GNU General Public License ("GPL") as published by the Free Software 20 * Foundation, either version 2 of that License or (at your option) any 21 * later version. 22 * 23 * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY 24 * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED 25 * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE 26 * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY 27 * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES 28 * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; 29 * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND 30 * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 31 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS 32 * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 33 */ 34 35&board_ifc { 36 nor@0,0 { 37 #address-cells = <1>; 38 #size-cells = <1>; 39 compatible = "cfi-flash"; 40 reg = <0x0 0x0 0x2000000>; 41 bank-width = <2>; 42 device-width = <1>; 43 44 partition@40000 { 45 /* 256KB for DTB Image */ 46 reg = <0x00040000 0x00040000>; 47 label = "NOR DTB Image"; 48 }; 49 50 partition@80000 { 51 /* 7 MB for Linux Kernel Image */ 52 reg = <0x00080000 0x00700000>; 53 label = "NOR Linux Kernel Image"; 54 }; 55 56 partition@800000 { 57 /* 20MB for JFFS2 based Root file System */ 58 reg = <0x00800000 0x01400000>; 59 label = "NOR JFFS2 Root File System"; 60 }; 61 62 partition@1f00000 { 63 /* This location must not be altered */ 64 /* 512KB for u-boot Bootloader Image */ 65 /* 512KB for u-boot Environment Variables */ 66 reg = <0x01f00000 0x00100000>; 67 label = "NOR U-Boot Image"; 68 read-only; 69 }; 70 }; 71 72 nand@1,0 { 73 #address-cells = <1>; 74 #size-cells = <1>; 75 compatible = "fsl,ifc-nand"; 76 reg = <0x1 0x0 0x10000>; 77 78 partition@0 { 79 /* This location must not be altered */ 80 /* 1MB for u-boot Bootloader Image */ 81 reg = <0x0 0x00100000>; 82 label = "NAND U-Boot Image"; 83 read-only; 84 }; 85 86 partition@100000 { 87 /* 1MB for DTB Image */ 88 reg = <0x00100000 0x00100000>; 89 label = "NAND DTB Image"; 90 }; 91 92 partition@200000 { 93 /* 4MB for Linux Kernel Image */ 94 reg = <0x00200000 0x00400000>; 95 label = "NAND Linux Kernel Image"; 96 }; 97 98 partition@600000 { 99 /* 4MB for Compressed Root file System Image */ 100 reg = <0x00600000 0x00400000>; 101 label = "NAND Compressed RFS Image"; 102 }; 103 104 partition@a00000 { 105 /* 15MB for JFFS2 based Root file System */ 106 reg = <0x00a00000 0x00f00000>; 107 label = "NAND JFFS2 Root File System"; 108 }; 109 110 partition@1900000 { 111 /* 7MB for User Area */ 112 reg = <0x01900000 0x00700000>; 113 label = "NAND User area"; 114 }; 115 }; 116 117 cpld@3,0 { 118 #address-cells = <1>; 119 #size-cells = <1>; 120 compatible = "fsl,p1010rdb-cpld"; 121 reg = <0x3 0x0 0x0000020>; 122 bank-width = <1>; 123 device-width = <1>; 124 }; 125}; 126 127&board_soc { 128 i2c@3000 { 129 rtc@68 { 130 compatible = "pericom,pt7c4338"; 131 reg = <0x68>; 132 }; 133 }; 134 135 spi@7000 { 136 flash@0 { 137 #address-cells = <1>; 138 #size-cells = <1>; 139 compatible = "spansion,s25sl12801"; 140 reg = <0>; 141 spi-max-frequency = <40000000>; 142 143 partition@0 { 144 /* 1MB for u-boot Bootloader Image */ 145 /* 1MB for Environment */ 146 reg = <0x0 0x00100000>; 147 label = "SPI Flash U-Boot Image"; 148 read-only; 149 }; 150 151 partition@100000 { 152 /* 512KB for DTB Image */ 153 reg = <0x00100000 0x00080000>; 154 label = "SPI Flash DTB Image"; 155 }; 156 157 partition@180000 { 158 /* 4MB for Linux Kernel Image */ 159 reg = <0x00180000 0x00400000>; 160 label = "SPI Flash Linux Kernel Image"; 161 }; 162 163 partition@580000 { 164 /* 4MB for Compressed RFS Image */ 165 reg = <0x00580000 0x00400000>; 166 label = "SPI Flash Compressed RFSImage"; 167 }; 168 169 partition@980000 { 170 /* 6.5MB for JFFS2 based RFS */ 171 reg = <0x00980000 0x00680000>; 172 label = "SPI Flash JFFS2 RFS"; 173 }; 174 }; 175 }; 176 177 usb@22000 { 178 phy_type = "utmi"; 179 dr_mode = "host"; 180 }; 181 182 mdio@24000 { 183 phy0: ethernet-phy@0 { 184 interrupts = <3 1 0 0>; 185 reg = <0x1>; 186 }; 187 188 phy1: ethernet-phy@1 { 189 interrupts = <2 1 0 0>; 190 reg = <0x0>; 191 }; 192 193 phy2: ethernet-phy@2 { 194 interrupts = <2 1 0 0>; 195 reg = <0x2>; 196 }; 197 198 tbi-phy@3 { 199 device_type = "tbi-phy"; 200 reg = <0x3>; 201 }; 202 }; 203 204 mdio@25000 { 205 tbi0: tbi-phy@11 { 206 reg = <0x11>; 207 device_type = "tbi-phy"; 208 }; 209 }; 210 211 mdio@26000 { 212 tbi1: tbi-phy@11 { 213 reg = <0x11>; 214 device_type = "tbi-phy"; 215 }; 216 }; 217 218 enet0: ethernet@b0000 { 219 phy-handle = <&phy0>; 220 phy-connection-type = "rgmii-id"; 221 }; 222 223 enet1: ethernet@b1000 { 224 phy-handle = <&phy1>; 225 tbi-handle = <&tbi0>; 226 phy-connection-type = "sgmii"; 227 }; 228 229 enet2: ethernet@b2000 { 230 phy-handle = <&phy2>; 231 tbi-handle = <&tbi1>; 232 phy-connection-type = "sgmii"; 233 }; 234}; 235