Kconfig revision a12f66fccf2e266ad197df142b5ebafc6a169a8c 
1#
2# Input core configuration
3#
4menuconfig INPUT_KEYBOARD
5	bool "Keyboards" if EMBEDDED || !X86
6	default y
7	help
8	  Say Y here, and a list of supported keyboards will be displayed.
9	  This option doesn't affect the kernel.
10
11	  If unsure, say Y.
12
13if INPUT_KEYBOARD
14
15config KEYBOARD_ATKBD
16	tristate "AT keyboard" if EMBEDDED || !X86_PC
17	default y
18	select SERIO
19	select SERIO_LIBPS2
20	select SERIO_I8042 if X86_PC
21	select SERIO_GSCPS2 if GSC
22	help
23	  Say Y here if you want to use a standard AT or PS/2 keyboard. Usually
24	  you'll need this, unless you have a different type keyboard (USB, ADB
25	  or other). This also works for AT and PS/2 keyboards connected over a
26	  PS/2 to serial converter.
27
28	  If unsure, say Y.
29
30	  To compile this driver as a module, choose M here: the
31	  module will be called atkbd.
32
33config KEYBOARD_ATKBD_HP_KEYCODES
34	bool "Use HP keyboard scancodes"
35	depends on PARISC && KEYBOARD_ATKBD
36	default y
37	help
38	  Say Y here if you have a PA-RISC machine and want to use an AT or
39	  PS/2 keyboard, and your keyboard uses keycodes that are specific to
40	  PA-RISC keyboards.
41
42	  Say N if you use a standard keyboard.
43
44config KEYBOARD_ATKBD_RDI_KEYCODES
45	bool "Use PrecisionBook keyboard scancodes"
46	depends on KEYBOARD_ATKBD_HP_KEYCODES
47	default n
48	help
49	  If you have an RDI PrecisionBook, say Y here if you want to use its
50	  built-in keyboard (as opposed to an external keyboard).
51
52	  The PrecisionBook has five keys that conflict with those used by most
53	  AT and PS/2 keyboards. These are as follows:
54
55	    PrecisionBook    Standard AT or PS/2
56
57	    F1               F12
58	    Left Ctrl        Left Alt
59	    Caps Lock        Left Ctrl
60	    Right Ctrl       Caps Lock
61	    Left             102nd key (the key to the right of Left Shift)
62
63	  If you say N here, and use the PrecisionBook keyboard, then each key
64	  in the left-hand column will be interpreted as the corresponding key
65	  in the right-hand column.
66
67	  If you say Y here, and use an external keyboard, then each key in the
68	  right-hand column will be interpreted as the key shown in the
69	  left-hand column.
70
71config KEYBOARD_SUNKBD
72	tristate "Sun Type 4 and Type 5 keyboard"
73	select SERIO
74	help
75	  Say Y here if you want to use a Sun Type 4 or Type 5 keyboard,
76	  connected either to the Sun keyboard connector or to an serial
77	  (RS-232) port via a simple adapter.
78
79	  To compile this driver as a module, choose M here: the
80	  module will be called sunkbd.
81
82config KEYBOARD_LKKBD
83	tristate "DECstation/VAXstation LK201/LK401 keyboard"
84	select SERIO
85	help
86	  Say Y here if you want to use a LK201 or LK401 style serial
87	  keyboard. This keyboard is also useable on PCs if you attach
88	  it with the inputattach program. The connector pinout is
89	  described within lkkbd.c.
90
91	  To compile this driver as a module, choose M here: the
92	  module will be called lkkbd.
93
94config KEYBOARD_LOCOMO
95	tristate "LoCoMo Keyboard Support"
96	depends on SHARP_LOCOMO && INPUT_KEYBOARD
97	help
98	  Say Y here if you are running Linux on a Sharp Zaurus Collie or Poodle based PDA
99
100	  To compile this driver as a module, choose M here: the
101	  module will be called locomokbd.
102
103config KEYBOARD_XTKBD
104	tristate "XT keyboard"
105	select SERIO
106	help
107	  Say Y here if you want to use the old IBM PC/XT keyboard (or
108	  compatible) on your system. This is only possible with a
109	  parallel port keyboard adapter, you cannot connect it to the
110	  keyboard port on a PC that runs Linux.
111
112	  To compile this driver as a module, choose M here: the
113	  module will be called xtkbd.
114
115config KEYBOARD_NEWTON
116	tristate "Newton keyboard"
117	select SERIO
118	help
119	  Say Y here if you have a Newton keyboard on a serial port.
120
121	  To compile this driver as a module, choose M here: the
122	  module will be called newtonkbd.
123
124config KEYBOARD_STOWAWAY
125	tristate "Stowaway keyboard"
126	select SERIO
127	help
128	  Say Y here if you have a Stowaway keyboard on a serial port.
129	  Stowaway compatible keyboards like Dicota Input-PDA keyboard
130	  are also supported by this driver.
131
132	  To compile this driver as a module, choose M here: the
133	  module will be called stowaway.
134
135config KEYBOARD_CORGI
136	tristate "Corgi keyboard"
137	depends on PXA_SHARPSL
138	default y	
139	help
140	  Say Y here to enable the keyboard on the Sharp Zaurus SL-C7xx 
141	  series of PDAs.
142
143	  To compile this driver as a module, choose M here: the 
144	  module will be called corgikbd.
145
146config KEYBOARD_SPITZ
147	tristate "Spitz keyboard"
148	depends on PXA_SHARPSL
149	default y
150	help
151	  Say Y here to enable the keyboard on the Sharp Zaurus SL-C1000,
152	  SL-C3000 and Sl-C3100 series of PDAs.
153
154	  To compile this driver as a module, choose M here: the
155	  module will be called spitzkbd.
156
157config KEYBOARD_AMIGA
158	tristate "Amiga keyboard"
159	depends on AMIGA
160	help
161	  Say Y here if you are running Linux on any AMIGA and have a keyboard
162	  attached.
163
164	  To compile this driver as a module, choose M here: the
165	  module will be called amikbd.
166
167config KEYBOARD_HIL_OLD
168	tristate "HP HIL keyboard support (simple driver)"
169	depends on GSC
170	default y
171	help
172	  The "Human Interface Loop" is a older, 8-channel USB-like
173	  controller used in several Hewlett Packard models. This driver
174	  was adapted from the one written for m68k/hp300, and implements
175	  support for a keyboard attached to the HIL port, but not for
176	  any other types of HIL input devices like mice or tablets.
177	  However, it has been thoroughly tested and is stable.
178
179	  If you want full HIL support including support for multiple
180	  keyboards, mices and tablets, you have to enable the
181	  "HP System Device Controller i8042 Support" in the input/serio
182	  submenu.
183
184config KEYBOARD_HIL
185	tristate "HP HIL keyboard support"
186	depends on GSC
187	default y
188	select HP_SDC
189	select HIL_MLC
190	select SERIO
191	help
192	  The "Human Interface Loop" is a older, 8-channel USB-like
193	  controller used in several Hewlett Packard models.
194	  This driver implements support for HIL-keyboards attached
195	  to your machine, so normally you should say Y here.
196
197config KEYBOARD_OMAP
198	tristate "TI OMAP keypad support"
199	depends on (ARCH_OMAP1 || ARCH_OMAP2)
200	help
201	  Say Y here if you want to use the OMAP keypad.
202
203	  To compile this driver as a module, choose M here: the
204	  module will be called omap-keypad.
205
206endif
207