Kconfig revision fff71312e7227c6850f367ff9c72f96d5b33b1d0 
1#
2# Input core configuration
3#
4menuconfig INPUT_KEYBOARD
5	bool "Keyboards" if EMBEDDED || !X86
6	default y
7	help
8	  Say Y here, and a list of supported keyboards will be displayed.
9	  This option doesn't affect the kernel.
10
11	  If unsure, say Y.
12
13if INPUT_KEYBOARD
14
15config KEYBOARD_ATKBD
16	tristate "AT keyboard" if !PC
17	default y
18	select SERIO
19	select SERIO_LIBPS2
20	select SERIO_I8042 if PC
21	select SERIO_GSCPS2 if GSC
22	help
23	  Say Y here if you want to use a standard AT or PS/2 keyboard. Usually
24	  you'll need this, unless you have a different type keyboard (USB, ADB
25	  or other). This also works for AT and PS/2 keyboards connected over a
26	  PS/2 to serial converter.
27
28	  If unsure, say Y.
29
30	  To compile this driver as a module, choose M here: the
31	  module will be called atkbd.
32
33config KEYBOARD_ATKBD_HP_KEYCODES
34	bool "Use HP keyboard scancodes"
35	depends on PARISC && KEYBOARD_ATKBD
36	default y
37	help
38	  Say Y here if you have a PA-RISC machine and want to use an AT or
39	  PS/2 keyboard, and your keyboard uses keycodes that are specific to
40	  PA-RISC keyboards.
41
42	  Say N if you use a standard keyboard.
43
44config KEYBOARD_ATKBD_RDI_KEYCODES
45	bool "Use PrecisionBook keyboard scancodes"
46	depends on KEYBOARD_ATKBD_HP_KEYCODES
47	default n
48	help
49	  If you have an RDI PrecisionBook, say Y here if you want to use its
50	  built-in keyboard (as opposed to an external keyboard).
51
52	  The PrecisionBook has five keys that conflict with those used by most
53	  AT and PS/2 keyboards. These are as follows:
54
55	    PrecisionBook    Standard AT or PS/2
56
57	    F1               F12
58	    Left Ctrl        Left Alt
59	    Caps Lock        Left Ctrl
60	    Right Ctrl       Caps Lock
61	    Left             102nd key (the key to the right of Left Shift)
62
63	  If you say N here, and use the PrecisionBook keyboard, then each key
64	  in the left-hand column will be interpreted as the corresponding key
65	  in the right-hand column.
66
67	  If you say Y here, and use an external keyboard, then each key in the
68	  right-hand column will be interpreted as the key shown in the
69	  left-hand column.
70
71config KEYBOARD_SUNKBD
72	tristate "Sun Type 4 and Type 5 keyboard"
73	select SERIO
74	help
75	  Say Y here if you want to use a Sun Type 4 or Type 5 keyboard,
76	  connected either to the Sun keyboard connector or to an serial
77	  (RS-232) port via a simple adapter.
78
79	  To compile this driver as a module, choose M here: the
80	  module will be called sunkbd.
81
82config KEYBOARD_LKKBD
83	tristate "DECstation/VAXstation LK201/LK401 keyboard"
84	select SERIO
85	help
86	  Say Y here if you want to use a LK201 or LK401 style serial
87	  keyboard. This keyboard is also useable on PCs if you attach
88	  it with the inputattach program. The connector pinout is
89	  described within lkkbd.c.
90
91	  To compile this driver as a module, choose M here: the
92	  module will be called lkkbd.
93
94config KEYBOARD_LOCOMO
95	tristate "LoCoMo Keyboard Support"
96	depends on SHARP_LOCOMO
97	help
98	  Say Y here if you are running Linux on a Sharp Zaurus Collie or Poodle based PDA
99
100	  To compile this driver as a module, choose M here: the
101	  module will be called locomokbd.
102
103config KEYBOARD_XTKBD
104	tristate "XT keyboard"
105	select SERIO
106	help
107	  Say Y here if you want to use the old IBM PC/XT keyboard (or
108	  compatible) on your system. This is only possible with a
109	  parallel port keyboard adapter, you cannot connect it to the
110	  keyboard port on a PC that runs Linux.
111
112	  To compile this driver as a module, choose M here: the
113	  module will be called xtkbd.
114
115config KEYBOARD_NEWTON
116	tristate "Newton keyboard"
117	select SERIO
118	help
119	  Say Y here if you have a Newton keyboard on a serial port.
120
121	  To compile this driver as a module, choose M here: the
122	  module will be called newtonkbd.
123
124config KEYBOARD_CORGI
125	tristate "Corgi keyboard"
126	depends on PXA_SHARPSL
127	default y	
128	help
129	  Say Y here to enable the keyboard on the Sharp Zaurus SL-C7xx 
130	  series of PDAs.
131
132	  To compile this driver as a module, choose M here: the 
133	  module will be called corgikbd.
134
135config KEYBOARD_SPITZ
136	tristate "Spitz keyboard"
137	depends on PXA_SHARPSL
138	default y
139	help
140	  Say Y here to enable the keyboard on the Sharp Zaurus SL-C1000,
141	  SL-C3000 and Sl-C3100 series of PDAs.
142
143	  To compile this driver as a module, choose M here: the
144	  module will be called spitzkbd.
145
146config KEYBOARD_MAPLE
147	tristate "Maple bus keyboard"
148	depends on SH_DREAMCAST && MAPLE
149	help
150	  Say Y here if you have a DreamCast console running Linux and have
151	  a keyboard attached to its Maple bus.
152
153	  To compile this driver as a module, choose M here: the
154	  module will be called maple_keyb.
155
156config KEYBOARD_AMIGA
157	tristate "Amiga keyboard"
158	depends on AMIGA
159	help
160	  Say Y here if you are running Linux on any AMIGA and have a keyboard
161	  attached.
162
163	  To compile this driver as a module, choose M here: the
164	  module will be called amikbd.
165
166config KEYBOARD_HIL_OLD
167	tristate "HP HIL keyboard support (simple driver)"
168	depends on GSC
169	default y
170	help
171	  The "Human Interface Loop" is a older, 8-channel USB-like
172	  controller used in several Hewlett Packard models. This driver
173	  was adapted from the one written for m68k/hp300, and implements
174	  support for a keyboard attached to the HIL port, but not for
175	  any other types of HIL input devices like mice or tablets.
176	  However, it has been thoroughly tested and is stable.
177
178	  If you want full HIL support including support for multiple
179	  keyboards, mices and tablets, you have to enable the
180	  "HP System Device Controller i8042 Support" in the input/serio
181	  submenu.
182
183config KEYBOARD_HIL
184	tristate "HP HIL keyboard support"
185	depends on GSC
186	default y
187	select HP_SDC
188	select HIL_MLC
189	select SERIO
190	help
191	  The "Human Interface Loop" is a older, 8-channel USB-like
192	  controller used in several Hewlett Packard models.
193	  This driver implements support for HIL-keyboards attached
194	  to your machine, so normally you should say Y here.
195
196endif
197