main.c revision 591f3dc200abb2100c473248a121ce14bfeeabd6
1/* 2 3 Broadcom B43 wireless driver 4 5 Copyright (c) 2005 Martin Langer <martin-langer@gmx.de> 6 Copyright (c) 2005 Stefano Brivio <stefano.brivio@polimi.it> 7 Copyright (c) 2005-2009 Michael Buesch <mb@bu3sch.de> 8 Copyright (c) 2005 Danny van Dyk <kugelfang@gentoo.org> 9 Copyright (c) 2005 Andreas Jaggi <andreas.jaggi@waterwave.ch> 10 11 Some parts of the code in this file are derived from the ipw2200 12 driver Copyright(c) 2003 - 2004 Intel Corporation. 13 14 This program is free software; you can redistribute it and/or modify 15 it under the terms of the GNU General Public License as published by 16 the Free Software Foundation; either version 2 of the License, or 17 (at your option) any later version. 18 19 This program is distributed in the hope that it will be useful, 20 but WITHOUT ANY WARRANTY; without even the implied warranty of 21 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 22 GNU General Public License for more details. 23 24 You should have received a copy of the GNU General Public License 25 along with this program; see the file COPYING. If not, write to 26 the Free Software Foundation, Inc., 51 Franklin Steet, Fifth Floor, 27 Boston, MA 02110-1301, USA. 28 29*/ 30 31#include <linux/delay.h> 32#include <linux/init.h> 33#include <linux/moduleparam.h> 34#include <linux/if_arp.h> 35#include <linux/etherdevice.h> 36#include <linux/firmware.h> 37#include <linux/wireless.h> 38#include <linux/workqueue.h> 39#include <linux/skbuff.h> 40#include <linux/io.h> 41#include <linux/dma-mapping.h> 42#include <asm/unaligned.h> 43 44#include "b43.h" 45#include "main.h" 46#include "debugfs.h" 47#include "phy_common.h" 48#include "phy_g.h" 49#include "phy_n.h" 50#include "dma.h" 51#include "pio.h" 52#include "sysfs.h" 53#include "xmit.h" 54#include "lo.h" 55#include "pcmcia.h" 56 57MODULE_DESCRIPTION("Broadcom B43 wireless driver"); 58MODULE_AUTHOR("Martin Langer"); 59MODULE_AUTHOR("Stefano Brivio"); 60MODULE_AUTHOR("Michael Buesch"); 61MODULE_LICENSE("GPL"); 62 63MODULE_FIRMWARE(B43_SUPPORTED_FIRMWARE_ID); 64 65 66static int modparam_bad_frames_preempt; 67module_param_named(bad_frames_preempt, modparam_bad_frames_preempt, int, 0444); 68MODULE_PARM_DESC(bad_frames_preempt, 69 "enable(1) / disable(0) Bad Frames Preemption"); 70 71static char modparam_fwpostfix[16]; 72module_param_string(fwpostfix, modparam_fwpostfix, 16, 0444); 73MODULE_PARM_DESC(fwpostfix, "Postfix for the .fw files to load."); 74 75static int modparam_hwpctl; 76module_param_named(hwpctl, modparam_hwpctl, int, 0444); 77MODULE_PARM_DESC(hwpctl, "Enable hardware-side power control (default off)"); 78 79static int modparam_nohwcrypt; 80module_param_named(nohwcrypt, modparam_nohwcrypt, int, 0444); 81MODULE_PARM_DESC(nohwcrypt, "Disable hardware encryption."); 82 83int b43_modparam_qos = 1; 84module_param_named(qos, b43_modparam_qos, int, 0444); 85MODULE_PARM_DESC(qos, "Enable QOS support (default on)"); 86 87static int modparam_btcoex = 1; 88module_param_named(btcoex, modparam_btcoex, int, 0444); 89MODULE_PARM_DESC(btcoex, "Enable Bluetooth coexistance (default on)"); 90 91int b43_modparam_verbose = B43_VERBOSITY_DEFAULT; 92module_param_named(verbose, b43_modparam_verbose, int, 0644); 93MODULE_PARM_DESC(verbose, "Log message verbosity: 0=error, 1=warn, 2=info(default), 3=debug"); 94 95 96static const struct ssb_device_id b43_ssb_tbl[] = { 97 SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_80211, 5), 98 SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_80211, 6), 99 SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_80211, 7), 100 SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_80211, 9), 101 SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_80211, 10), 102 SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_80211, 11), 103 SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_80211, 13), 104 SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_80211, 15), 105 SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_80211, 16), 106 SSB_DEVTABLE_END 107}; 108 109MODULE_DEVICE_TABLE(ssb, b43_ssb_tbl); 110 111/* Channel and ratetables are shared for all devices. 112 * They can't be const, because ieee80211 puts some precalculated 113 * data in there. This data is the same for all devices, so we don't 114 * get concurrency issues */ 115#define RATETAB_ENT(_rateid, _flags) \ 116 { \ 117 .bitrate = B43_RATE_TO_BASE100KBPS(_rateid), \ 118 .hw_value = (_rateid), \ 119 .flags = (_flags), \ 120 } 121 122/* 123 * NOTE: When changing this, sync with xmit.c's 124 * b43_plcp_get_bitrate_idx_* functions! 125 */ 126static struct ieee80211_rate __b43_ratetable[] = { 127 RATETAB_ENT(B43_CCK_RATE_1MB, 0), 128 RATETAB_ENT(B43_CCK_RATE_2MB, IEEE80211_RATE_SHORT_PREAMBLE), 129 RATETAB_ENT(B43_CCK_RATE_5MB, IEEE80211_RATE_SHORT_PREAMBLE), 130 RATETAB_ENT(B43_CCK_RATE_11MB, IEEE80211_RATE_SHORT_PREAMBLE), 131 RATETAB_ENT(B43_OFDM_RATE_6MB, 0), 132 RATETAB_ENT(B43_OFDM_RATE_9MB, 0), 133 RATETAB_ENT(B43_OFDM_RATE_12MB, 0), 134 RATETAB_ENT(B43_OFDM_RATE_18MB, 0), 135 RATETAB_ENT(B43_OFDM_RATE_24MB, 0), 136 RATETAB_ENT(B43_OFDM_RATE_36MB, 0), 137 RATETAB_ENT(B43_OFDM_RATE_48MB, 0), 138 RATETAB_ENT(B43_OFDM_RATE_54MB, 0), 139}; 140 141#define b43_a_ratetable (__b43_ratetable + 4) 142#define b43_a_ratetable_size 8 143#define b43_b_ratetable (__b43_ratetable + 0) 144#define b43_b_ratetable_size 4 145#define b43_g_ratetable (__b43_ratetable + 0) 146#define b43_g_ratetable_size 12 147 148#define CHAN4G(_channel, _freq, _flags) { \ 149 .band = IEEE80211_BAND_2GHZ, \ 150 .center_freq = (_freq), \ 151 .hw_value = (_channel), \ 152 .flags = (_flags), \ 153 .max_antenna_gain = 0, \ 154 .max_power = 30, \ 155} 156static struct ieee80211_channel b43_2ghz_chantable[] = { 157 CHAN4G(1, 2412, 0), 158 CHAN4G(2, 2417, 0), 159 CHAN4G(3, 2422, 0), 160 CHAN4G(4, 2427, 0), 161 CHAN4G(5, 2432, 0), 162 CHAN4G(6, 2437, 0), 163 CHAN4G(7, 2442, 0), 164 CHAN4G(8, 2447, 0), 165 CHAN4G(9, 2452, 0), 166 CHAN4G(10, 2457, 0), 167 CHAN4G(11, 2462, 0), 168 CHAN4G(12, 2467, 0), 169 CHAN4G(13, 2472, 0), 170 CHAN4G(14, 2484, 0), 171}; 172#undef CHAN4G 173 174#define CHAN5G(_channel, _flags) { \ 175 .band = IEEE80211_BAND_5GHZ, \ 176 .center_freq = 5000 + (5 * (_channel)), \ 177 .hw_value = (_channel), \ 178 .flags = (_flags), \ 179 .max_antenna_gain = 0, \ 180 .max_power = 30, \ 181} 182static struct ieee80211_channel b43_5ghz_nphy_chantable[] = { 183 CHAN5G(32, 0), CHAN5G(34, 0), 184 CHAN5G(36, 0), CHAN5G(38, 0), 185 CHAN5G(40, 0), CHAN5G(42, 0), 186 CHAN5G(44, 0), CHAN5G(46, 0), 187 CHAN5G(48, 0), CHAN5G(50, 0), 188 CHAN5G(52, 0), CHAN5G(54, 0), 189 CHAN5G(56, 0), CHAN5G(58, 0), 190 CHAN5G(60, 0), CHAN5G(62, 0), 191 CHAN5G(64, 0), CHAN5G(66, 0), 192 CHAN5G(68, 0), CHAN5G(70, 0), 193 CHAN5G(72, 0), CHAN5G(74, 0), 194 CHAN5G(76, 0), CHAN5G(78, 0), 195 CHAN5G(80, 0), CHAN5G(82, 0), 196 CHAN5G(84, 0), CHAN5G(86, 0), 197 CHAN5G(88, 0), CHAN5G(90, 0), 198 CHAN5G(92, 0), CHAN5G(94, 0), 199 CHAN5G(96, 0), CHAN5G(98, 0), 200 CHAN5G(100, 0), CHAN5G(102, 0), 201 CHAN5G(104, 0), CHAN5G(106, 0), 202 CHAN5G(108, 0), CHAN5G(110, 0), 203 CHAN5G(112, 0), CHAN5G(114, 0), 204 CHAN5G(116, 0), CHAN5G(118, 0), 205 CHAN5G(120, 0), CHAN5G(122, 0), 206 CHAN5G(124, 0), CHAN5G(126, 0), 207 CHAN5G(128, 0), CHAN5G(130, 0), 208 CHAN5G(132, 0), CHAN5G(134, 0), 209 CHAN5G(136, 0), CHAN5G(138, 0), 210 CHAN5G(140, 0), CHAN5G(142, 0), 211 CHAN5G(144, 0), CHAN5G(145, 0), 212 CHAN5G(146, 0), CHAN5G(147, 0), 213 CHAN5G(148, 0), CHAN5G(149, 0), 214 CHAN5G(150, 0), CHAN5G(151, 0), 215 CHAN5G(152, 0), CHAN5G(153, 0), 216 CHAN5G(154, 0), CHAN5G(155, 0), 217 CHAN5G(156, 0), CHAN5G(157, 0), 218 CHAN5G(158, 0), CHAN5G(159, 0), 219 CHAN5G(160, 0), CHAN5G(161, 0), 220 CHAN5G(162, 0), CHAN5G(163, 0), 221 CHAN5G(164, 0), CHAN5G(165, 0), 222 CHAN5G(166, 0), CHAN5G(168, 0), 223 CHAN5G(170, 0), CHAN5G(172, 0), 224 CHAN5G(174, 0), CHAN5G(176, 0), 225 CHAN5G(178, 0), CHAN5G(180, 0), 226 CHAN5G(182, 0), CHAN5G(184, 0), 227 CHAN5G(186, 0), CHAN5G(188, 0), 228 CHAN5G(190, 0), CHAN5G(192, 0), 229 CHAN5G(194, 0), CHAN5G(196, 0), 230 CHAN5G(198, 0), CHAN5G(200, 0), 231 CHAN5G(202, 0), CHAN5G(204, 0), 232 CHAN5G(206, 0), CHAN5G(208, 0), 233 CHAN5G(210, 0), CHAN5G(212, 0), 234 CHAN5G(214, 0), CHAN5G(216, 0), 235 CHAN5G(218, 0), CHAN5G(220, 0), 236 CHAN5G(222, 0), CHAN5G(224, 0), 237 CHAN5G(226, 0), CHAN5G(228, 0), 238}; 239 240static struct ieee80211_channel b43_5ghz_aphy_chantable[] = { 241 CHAN5G(34, 0), CHAN5G(36, 0), 242 CHAN5G(38, 0), CHAN5G(40, 0), 243 CHAN5G(42, 0), CHAN5G(44, 0), 244 CHAN5G(46, 0), CHAN5G(48, 0), 245 CHAN5G(52, 0), CHAN5G(56, 0), 246 CHAN5G(60, 0), CHAN5G(64, 0), 247 CHAN5G(100, 0), CHAN5G(104, 0), 248 CHAN5G(108, 0), CHAN5G(112, 0), 249 CHAN5G(116, 0), CHAN5G(120, 0), 250 CHAN5G(124, 0), CHAN5G(128, 0), 251 CHAN5G(132, 0), CHAN5G(136, 0), 252 CHAN5G(140, 0), CHAN5G(149, 0), 253 CHAN5G(153, 0), CHAN5G(157, 0), 254 CHAN5G(161, 0), CHAN5G(165, 0), 255 CHAN5G(184, 0), CHAN5G(188, 0), 256 CHAN5G(192, 0), CHAN5G(196, 0), 257 CHAN5G(200, 0), CHAN5G(204, 0), 258 CHAN5G(208, 0), CHAN5G(212, 0), 259 CHAN5G(216, 0), 260}; 261#undef CHAN5G 262 263static struct ieee80211_supported_band b43_band_5GHz_nphy = { 264 .band = IEEE80211_BAND_5GHZ, 265 .channels = b43_5ghz_nphy_chantable, 266 .n_channels = ARRAY_SIZE(b43_5ghz_nphy_chantable), 267 .bitrates = b43_a_ratetable, 268 .n_bitrates = b43_a_ratetable_size, 269}; 270 271static struct ieee80211_supported_band b43_band_5GHz_aphy = { 272 .band = IEEE80211_BAND_5GHZ, 273 .channels = b43_5ghz_aphy_chantable, 274 .n_channels = ARRAY_SIZE(b43_5ghz_aphy_chantable), 275 .bitrates = b43_a_ratetable, 276 .n_bitrates = b43_a_ratetable_size, 277}; 278 279static struct ieee80211_supported_band b43_band_2GHz = { 280 .band = IEEE80211_BAND_2GHZ, 281 .channels = b43_2ghz_chantable, 282 .n_channels = ARRAY_SIZE(b43_2ghz_chantable), 283 .bitrates = b43_g_ratetable, 284 .n_bitrates = b43_g_ratetable_size, 285}; 286 287static void b43_wireless_core_exit(struct b43_wldev *dev); 288static int b43_wireless_core_init(struct b43_wldev *dev); 289static void b43_wireless_core_stop(struct b43_wldev *dev); 290static int b43_wireless_core_start(struct b43_wldev *dev); 291 292static int b43_ratelimit(struct b43_wl *wl) 293{ 294 if (!wl || !wl->current_dev) 295 return 1; 296 if (b43_status(wl->current_dev) < B43_STAT_STARTED) 297 return 1; 298 /* We are up and running. 299 * Ratelimit the messages to avoid DoS over the net. */ 300 return net_ratelimit(); 301} 302 303void b43info(struct b43_wl *wl, const char *fmt, ...) 304{ 305 va_list args; 306 307 if (b43_modparam_verbose < B43_VERBOSITY_INFO) 308 return; 309 if (!b43_ratelimit(wl)) 310 return; 311 va_start(args, fmt); 312 printk(KERN_INFO "b43-%s: ", 313 (wl && wl->hw) ? wiphy_name(wl->hw->wiphy) : "wlan"); 314 vprintk(fmt, args); 315 va_end(args); 316} 317 318void b43err(struct b43_wl *wl, const char *fmt, ...) 319{ 320 va_list args; 321 322 if (b43_modparam_verbose < B43_VERBOSITY_ERROR) 323 return; 324 if (!b43_ratelimit(wl)) 325 return; 326 va_start(args, fmt); 327 printk(KERN_ERR "b43-%s ERROR: ", 328 (wl && wl->hw) ? wiphy_name(wl->hw->wiphy) : "wlan"); 329 vprintk(fmt, args); 330 va_end(args); 331} 332 333void b43warn(struct b43_wl *wl, const char *fmt, ...) 334{ 335 va_list args; 336 337 if (b43_modparam_verbose < B43_VERBOSITY_WARN) 338 return; 339 if (!b43_ratelimit(wl)) 340 return; 341 va_start(args, fmt); 342 printk(KERN_WARNING "b43-%s warning: ", 343 (wl && wl->hw) ? wiphy_name(wl->hw->wiphy) : "wlan"); 344 vprintk(fmt, args); 345 va_end(args); 346} 347 348void b43dbg(struct b43_wl *wl, const char *fmt, ...) 349{ 350 va_list args; 351 352 if (b43_modparam_verbose < B43_VERBOSITY_DEBUG) 353 return; 354 va_start(args, fmt); 355 printk(KERN_DEBUG "b43-%s debug: ", 356 (wl && wl->hw) ? wiphy_name(wl->hw->wiphy) : "wlan"); 357 vprintk(fmt, args); 358 va_end(args); 359} 360 361static void b43_ram_write(struct b43_wldev *dev, u16 offset, u32 val) 362{ 363 u32 macctl; 364 365 B43_WARN_ON(offset % 4 != 0); 366 367 macctl = b43_read32(dev, B43_MMIO_MACCTL); 368 if (macctl & B43_MACCTL_BE) 369 val = swab32(val); 370 371 b43_write32(dev, B43_MMIO_RAM_CONTROL, offset); 372 mmiowb(); 373 b43_write32(dev, B43_MMIO_RAM_DATA, val); 374} 375 376static inline void b43_shm_control_word(struct b43_wldev *dev, 377 u16 routing, u16 offset) 378{ 379 u32 control; 380 381 /* "offset" is the WORD offset. */ 382 control = routing; 383 control <<= 16; 384 control |= offset; 385 b43_write32(dev, B43_MMIO_SHM_CONTROL, control); 386} 387 388u32 __b43_shm_read32(struct b43_wldev *dev, u16 routing, u16 offset) 389{ 390 u32 ret; 391 392 if (routing == B43_SHM_SHARED) { 393 B43_WARN_ON(offset & 0x0001); 394 if (offset & 0x0003) { 395 /* Unaligned access */ 396 b43_shm_control_word(dev, routing, offset >> 2); 397 ret = b43_read16(dev, B43_MMIO_SHM_DATA_UNALIGNED); 398 ret <<= 16; 399 b43_shm_control_word(dev, routing, (offset >> 2) + 1); 400 ret |= b43_read16(dev, B43_MMIO_SHM_DATA); 401 402 goto out; 403 } 404 offset >>= 2; 405 } 406 b43_shm_control_word(dev, routing, offset); 407 ret = b43_read32(dev, B43_MMIO_SHM_DATA); 408out: 409 return ret; 410} 411 412u32 b43_shm_read32(struct b43_wldev *dev, u16 routing, u16 offset) 413{ 414 struct b43_wl *wl = dev->wl; 415 unsigned long flags; 416 u32 ret; 417 418 spin_lock_irqsave(&wl->shm_lock, flags); 419 ret = __b43_shm_read32(dev, routing, offset); 420 spin_unlock_irqrestore(&wl->shm_lock, flags); 421 422 return ret; 423} 424 425u16 __b43_shm_read16(struct b43_wldev *dev, u16 routing, u16 offset) 426{ 427 u16 ret; 428 429 if (routing == B43_SHM_SHARED) { 430 B43_WARN_ON(offset & 0x0001); 431 if (offset & 0x0003) { 432 /* Unaligned access */ 433 b43_shm_control_word(dev, routing, offset >> 2); 434 ret = b43_read16(dev, B43_MMIO_SHM_DATA_UNALIGNED); 435 436 goto out; 437 } 438 offset >>= 2; 439 } 440 b43_shm_control_word(dev, routing, offset); 441 ret = b43_read16(dev, B43_MMIO_SHM_DATA); 442out: 443 return ret; 444} 445 446u16 b43_shm_read16(struct b43_wldev *dev, u16 routing, u16 offset) 447{ 448 struct b43_wl *wl = dev->wl; 449 unsigned long flags; 450 u16 ret; 451 452 spin_lock_irqsave(&wl->shm_lock, flags); 453 ret = __b43_shm_read16(dev, routing, offset); 454 spin_unlock_irqrestore(&wl->shm_lock, flags); 455 456 return ret; 457} 458 459void __b43_shm_write32(struct b43_wldev *dev, u16 routing, u16 offset, u32 value) 460{ 461 if (routing == B43_SHM_SHARED) { 462 B43_WARN_ON(offset & 0x0001); 463 if (offset & 0x0003) { 464 /* Unaligned access */ 465 b43_shm_control_word(dev, routing, offset >> 2); 466 b43_write16(dev, B43_MMIO_SHM_DATA_UNALIGNED, 467 (value >> 16) & 0xffff); 468 b43_shm_control_word(dev, routing, (offset >> 2) + 1); 469 b43_write16(dev, B43_MMIO_SHM_DATA, value & 0xffff); 470 return; 471 } 472 offset >>= 2; 473 } 474 b43_shm_control_word(dev, routing, offset); 475 b43_write32(dev, B43_MMIO_SHM_DATA, value); 476} 477 478void b43_shm_write32(struct b43_wldev *dev, u16 routing, u16 offset, u32 value) 479{ 480 struct b43_wl *wl = dev->wl; 481 unsigned long flags; 482 483 spin_lock_irqsave(&wl->shm_lock, flags); 484 __b43_shm_write32(dev, routing, offset, value); 485 spin_unlock_irqrestore(&wl->shm_lock, flags); 486} 487 488void __b43_shm_write16(struct b43_wldev *dev, u16 routing, u16 offset, u16 value) 489{ 490 if (routing == B43_SHM_SHARED) { 491 B43_WARN_ON(offset & 0x0001); 492 if (offset & 0x0003) { 493 /* Unaligned access */ 494 b43_shm_control_word(dev, routing, offset >> 2); 495 b43_write16(dev, B43_MMIO_SHM_DATA_UNALIGNED, value); 496 return; 497 } 498 offset >>= 2; 499 } 500 b43_shm_control_word(dev, routing, offset); 501 b43_write16(dev, B43_MMIO_SHM_DATA, value); 502} 503 504void b43_shm_write16(struct b43_wldev *dev, u16 routing, u16 offset, u16 value) 505{ 506 struct b43_wl *wl = dev->wl; 507 unsigned long flags; 508 509 spin_lock_irqsave(&wl->shm_lock, flags); 510 __b43_shm_write16(dev, routing, offset, value); 511 spin_unlock_irqrestore(&wl->shm_lock, flags); 512} 513 514/* Read HostFlags */ 515u64 b43_hf_read(struct b43_wldev *dev) 516{ 517 u64 ret; 518 519 ret = b43_shm_read16(dev, B43_SHM_SHARED, B43_SHM_SH_HOSTFHI); 520 ret <<= 16; 521 ret |= b43_shm_read16(dev, B43_SHM_SHARED, B43_SHM_SH_HOSTFMI); 522 ret <<= 16; 523 ret |= b43_shm_read16(dev, B43_SHM_SHARED, B43_SHM_SH_HOSTFLO); 524 525 return ret; 526} 527 528/* Write HostFlags */ 529void b43_hf_write(struct b43_wldev *dev, u64 value) 530{ 531 u16 lo, mi, hi; 532 533 lo = (value & 0x00000000FFFFULL); 534 mi = (value & 0x0000FFFF0000ULL) >> 16; 535 hi = (value & 0xFFFF00000000ULL) >> 32; 536 b43_shm_write16(dev, B43_SHM_SHARED, B43_SHM_SH_HOSTFLO, lo); 537 b43_shm_write16(dev, B43_SHM_SHARED, B43_SHM_SH_HOSTFMI, mi); 538 b43_shm_write16(dev, B43_SHM_SHARED, B43_SHM_SH_HOSTFHI, hi); 539} 540 541void b43_tsf_read(struct b43_wldev *dev, u64 *tsf) 542{ 543 u32 low, high; 544 545 B43_WARN_ON(dev->dev->id.revision < 3); 546 547 /* The hardware guarantees us an atomic read, if we 548 * read the low register first. */ 549 low = b43_read32(dev, B43_MMIO_REV3PLUS_TSF_LOW); 550 high = b43_read32(dev, B43_MMIO_REV3PLUS_TSF_HIGH); 551 552 *tsf = high; 553 *tsf <<= 32; 554 *tsf |= low; 555} 556 557static void b43_time_lock(struct b43_wldev *dev) 558{ 559 u32 macctl; 560 561 macctl = b43_read32(dev, B43_MMIO_MACCTL); 562 macctl |= B43_MACCTL_TBTTHOLD; 563 b43_write32(dev, B43_MMIO_MACCTL, macctl); 564 /* Commit the write */ 565 b43_read32(dev, B43_MMIO_MACCTL); 566} 567 568static void b43_time_unlock(struct b43_wldev *dev) 569{ 570 u32 macctl; 571 572 macctl = b43_read32(dev, B43_MMIO_MACCTL); 573 macctl &= ~B43_MACCTL_TBTTHOLD; 574 b43_write32(dev, B43_MMIO_MACCTL, macctl); 575 /* Commit the write */ 576 b43_read32(dev, B43_MMIO_MACCTL); 577} 578 579static void b43_tsf_write_locked(struct b43_wldev *dev, u64 tsf) 580{ 581 u32 low, high; 582 583 B43_WARN_ON(dev->dev->id.revision < 3); 584 585 low = tsf; 586 high = (tsf >> 32); 587 /* The hardware guarantees us an atomic write, if we 588 * write the low register first. */ 589 b43_write32(dev, B43_MMIO_REV3PLUS_TSF_LOW, low); 590 mmiowb(); 591 b43_write32(dev, B43_MMIO_REV3PLUS_TSF_HIGH, high); 592 mmiowb(); 593} 594 595void b43_tsf_write(struct b43_wldev *dev, u64 tsf) 596{ 597 b43_time_lock(dev); 598 b43_tsf_write_locked(dev, tsf); 599 b43_time_unlock(dev); 600} 601 602static 603void b43_macfilter_set(struct b43_wldev *dev, u16 offset, const u8 *mac) 604{ 605 static const u8 zero_addr[ETH_ALEN] = { 0 }; 606 u16 data; 607 608 if (!mac) 609 mac = zero_addr; 610 611 offset |= 0x0020; 612 b43_write16(dev, B43_MMIO_MACFILTER_CONTROL, offset); 613 614 data = mac[0]; 615 data |= mac[1] << 8; 616 b43_write16(dev, B43_MMIO_MACFILTER_DATA, data); 617 data = mac[2]; 618 data |= mac[3] << 8; 619 b43_write16(dev, B43_MMIO_MACFILTER_DATA, data); 620 data = mac[4]; 621 data |= mac[5] << 8; 622 b43_write16(dev, B43_MMIO_MACFILTER_DATA, data); 623} 624 625static void b43_write_mac_bssid_templates(struct b43_wldev *dev) 626{ 627 const u8 *mac; 628 const u8 *bssid; 629 u8 mac_bssid[ETH_ALEN * 2]; 630 int i; 631 u32 tmp; 632 633 bssid = dev->wl->bssid; 634 mac = dev->wl->mac_addr; 635 636 b43_macfilter_set(dev, B43_MACFILTER_BSSID, bssid); 637 638 memcpy(mac_bssid, mac, ETH_ALEN); 639 memcpy(mac_bssid + ETH_ALEN, bssid, ETH_ALEN); 640 641 /* Write our MAC address and BSSID to template ram */ 642 for (i = 0; i < ARRAY_SIZE(mac_bssid); i += sizeof(u32)) { 643 tmp = (u32) (mac_bssid[i + 0]); 644 tmp |= (u32) (mac_bssid[i + 1]) << 8; 645 tmp |= (u32) (mac_bssid[i + 2]) << 16; 646 tmp |= (u32) (mac_bssid[i + 3]) << 24; 647 b43_ram_write(dev, 0x20 + i, tmp); 648 } 649} 650 651static void b43_upload_card_macaddress(struct b43_wldev *dev) 652{ 653 b43_write_mac_bssid_templates(dev); 654 b43_macfilter_set(dev, B43_MACFILTER_SELF, dev->wl->mac_addr); 655} 656 657static void b43_set_slot_time(struct b43_wldev *dev, u16 slot_time) 658{ 659 /* slot_time is in usec. */ 660 if (dev->phy.type != B43_PHYTYPE_G) 661 return; 662 b43_write16(dev, 0x684, 510 + slot_time); 663 b43_shm_write16(dev, B43_SHM_SHARED, 0x0010, slot_time); 664} 665 666static void b43_short_slot_timing_enable(struct b43_wldev *dev) 667{ 668 b43_set_slot_time(dev, 9); 669} 670 671static void b43_short_slot_timing_disable(struct b43_wldev *dev) 672{ 673 b43_set_slot_time(dev, 20); 674} 675 676/* Enable a Generic IRQ. "mask" is the mask of which IRQs to enable. 677 * Returns the _previously_ enabled IRQ mask. 678 */ 679static inline u32 b43_interrupt_enable(struct b43_wldev *dev, u32 mask) 680{ 681 u32 old_mask; 682 683 old_mask = b43_read32(dev, B43_MMIO_GEN_IRQ_MASK); 684 b43_write32(dev, B43_MMIO_GEN_IRQ_MASK, old_mask | mask); 685 686 return old_mask; 687} 688 689/* Disable a Generic IRQ. "mask" is the mask of which IRQs to disable. 690 * Returns the _previously_ enabled IRQ mask. 691 */ 692static inline u32 b43_interrupt_disable(struct b43_wldev *dev, u32 mask) 693{ 694 u32 old_mask; 695 696 old_mask = b43_read32(dev, B43_MMIO_GEN_IRQ_MASK); 697 b43_write32(dev, B43_MMIO_GEN_IRQ_MASK, old_mask & ~mask); 698 699 return old_mask; 700} 701 702/* Synchronize IRQ top- and bottom-half. 703 * IRQs must be masked before calling this. 704 * This must not be called with the irq_lock held. 705 */ 706static void b43_synchronize_irq(struct b43_wldev *dev) 707{ 708 synchronize_irq(dev->dev->irq); 709 tasklet_kill(&dev->isr_tasklet); 710} 711 712/* DummyTransmission function, as documented on 713 * http://bcm-specs.sipsolutions.net/DummyTransmission 714 */ 715void b43_dummy_transmission(struct b43_wldev *dev) 716{ 717 struct b43_wl *wl = dev->wl; 718 struct b43_phy *phy = &dev->phy; 719 unsigned int i, max_loop; 720 u16 value; 721 u32 buffer[5] = { 722 0x00000000, 723 0x00D40000, 724 0x00000000, 725 0x01000000, 726 0x00000000, 727 }; 728 729 switch (phy->type) { 730 case B43_PHYTYPE_A: 731 max_loop = 0x1E; 732 buffer[0] = 0x000201CC; 733 break; 734 case B43_PHYTYPE_B: 735 case B43_PHYTYPE_G: 736 max_loop = 0xFA; 737 buffer[0] = 0x000B846E; 738 break; 739 default: 740 B43_WARN_ON(1); 741 return; 742 } 743 744 spin_lock_irq(&wl->irq_lock); 745 write_lock(&wl->tx_lock); 746 747 for (i = 0; i < 5; i++) 748 b43_ram_write(dev, i * 4, buffer[i]); 749 750 /* Commit writes */ 751 b43_read32(dev, B43_MMIO_MACCTL); 752 753 b43_write16(dev, 0x0568, 0x0000); 754 b43_write16(dev, 0x07C0, 0x0000); 755 value = ((phy->type == B43_PHYTYPE_A) ? 1 : 0); 756 b43_write16(dev, 0x050C, value); 757 b43_write16(dev, 0x0508, 0x0000); 758 b43_write16(dev, 0x050A, 0x0000); 759 b43_write16(dev, 0x054C, 0x0000); 760 b43_write16(dev, 0x056A, 0x0014); 761 b43_write16(dev, 0x0568, 0x0826); 762 b43_write16(dev, 0x0500, 0x0000); 763 b43_write16(dev, 0x0502, 0x0030); 764 765 if (phy->radio_ver == 0x2050 && phy->radio_rev <= 0x5) 766 b43_radio_write16(dev, 0x0051, 0x0017); 767 for (i = 0x00; i < max_loop; i++) { 768 value = b43_read16(dev, 0x050E); 769 if (value & 0x0080) 770 break; 771 udelay(10); 772 } 773 for (i = 0x00; i < 0x0A; i++) { 774 value = b43_read16(dev, 0x050E); 775 if (value & 0x0400) 776 break; 777 udelay(10); 778 } 779 for (i = 0x00; i < 0x19; i++) { 780 value = b43_read16(dev, 0x0690); 781 if (!(value & 0x0100)) 782 break; 783 udelay(10); 784 } 785 if (phy->radio_ver == 0x2050 && phy->radio_rev <= 0x5) 786 b43_radio_write16(dev, 0x0051, 0x0037); 787 788 write_unlock(&wl->tx_lock); 789 spin_unlock_irq(&wl->irq_lock); 790} 791 792static void key_write(struct b43_wldev *dev, 793 u8 index, u8 algorithm, const u8 *key) 794{ 795 unsigned int i; 796 u32 offset; 797 u16 value; 798 u16 kidx; 799 800 /* Key index/algo block */ 801 kidx = b43_kidx_to_fw(dev, index); 802 value = ((kidx << 4) | algorithm); 803 b43_shm_write16(dev, B43_SHM_SHARED, 804 B43_SHM_SH_KEYIDXBLOCK + (kidx * 2), value); 805 806 /* Write the key to the Key Table Pointer offset */ 807 offset = dev->ktp + (index * B43_SEC_KEYSIZE); 808 for (i = 0; i < B43_SEC_KEYSIZE; i += 2) { 809 value = key[i]; 810 value |= (u16) (key[i + 1]) << 8; 811 b43_shm_write16(dev, B43_SHM_SHARED, offset + i, value); 812 } 813} 814 815static void keymac_write(struct b43_wldev *dev, u8 index, const u8 *addr) 816{ 817 u32 addrtmp[2] = { 0, 0, }; 818 u8 per_sta_keys_start = 8; 819 820 if (b43_new_kidx_api(dev)) 821 per_sta_keys_start = 4; 822 823 B43_WARN_ON(index < per_sta_keys_start); 824 /* We have two default TX keys and possibly two default RX keys. 825 * Physical mac 0 is mapped to physical key 4 or 8, depending 826 * on the firmware version. 827 * So we must adjust the index here. 828 */ 829 index -= per_sta_keys_start; 830 831 if (addr) { 832 addrtmp[0] = addr[0]; 833 addrtmp[0] |= ((u32) (addr[1]) << 8); 834 addrtmp[0] |= ((u32) (addr[2]) << 16); 835 addrtmp[0] |= ((u32) (addr[3]) << 24); 836 addrtmp[1] = addr[4]; 837 addrtmp[1] |= ((u32) (addr[5]) << 8); 838 } 839 840 if (dev->dev->id.revision >= 5) { 841 /* Receive match transmitter address mechanism */ 842 b43_shm_write32(dev, B43_SHM_RCMTA, 843 (index * 2) + 0, addrtmp[0]); 844 b43_shm_write16(dev, B43_SHM_RCMTA, 845 (index * 2) + 1, addrtmp[1]); 846 } else { 847 /* RXE (Receive Engine) and 848 * PSM (Programmable State Machine) mechanism 849 */ 850 if (index < 8) { 851 /* TODO write to RCM 16, 19, 22 and 25 */ 852 } else { 853 b43_shm_write32(dev, B43_SHM_SHARED, 854 B43_SHM_SH_PSM + (index * 6) + 0, 855 addrtmp[0]); 856 b43_shm_write16(dev, B43_SHM_SHARED, 857 B43_SHM_SH_PSM + (index * 6) + 4, 858 addrtmp[1]); 859 } 860 } 861} 862 863static void do_key_write(struct b43_wldev *dev, 864 u8 index, u8 algorithm, 865 const u8 *key, size_t key_len, const u8 *mac_addr) 866{ 867 u8 buf[B43_SEC_KEYSIZE] = { 0, }; 868 u8 per_sta_keys_start = 8; 869 870 if (b43_new_kidx_api(dev)) 871 per_sta_keys_start = 4; 872 873 B43_WARN_ON(index >= dev->max_nr_keys); 874 B43_WARN_ON(key_len > B43_SEC_KEYSIZE); 875 876 if (index >= per_sta_keys_start) 877 keymac_write(dev, index, NULL); /* First zero out mac. */ 878 if (key) 879 memcpy(buf, key, key_len); 880 key_write(dev, index, algorithm, buf); 881 if (index >= per_sta_keys_start) 882 keymac_write(dev, index, mac_addr); 883 884 dev->key[index].algorithm = algorithm; 885} 886 887static int b43_key_write(struct b43_wldev *dev, 888 int index, u8 algorithm, 889 const u8 *key, size_t key_len, 890 const u8 *mac_addr, 891 struct ieee80211_key_conf *keyconf) 892{ 893 int i; 894 int sta_keys_start; 895 896 if (key_len > B43_SEC_KEYSIZE) 897 return -EINVAL; 898 for (i = 0; i < dev->max_nr_keys; i++) { 899 /* Check that we don't already have this key. */ 900 B43_WARN_ON(dev->key[i].keyconf == keyconf); 901 } 902 if (index < 0) { 903 /* Pairwise key. Get an empty slot for the key. */ 904 if (b43_new_kidx_api(dev)) 905 sta_keys_start = 4; 906 else 907 sta_keys_start = 8; 908 for (i = sta_keys_start; i < dev->max_nr_keys; i++) { 909 if (!dev->key[i].keyconf) { 910 /* found empty */ 911 index = i; 912 break; 913 } 914 } 915 if (index < 0) { 916 b43warn(dev->wl, "Out of hardware key memory\n"); 917 return -ENOSPC; 918 } 919 } else 920 B43_WARN_ON(index > 3); 921 922 do_key_write(dev, index, algorithm, key, key_len, mac_addr); 923 if ((index <= 3) && !b43_new_kidx_api(dev)) { 924 /* Default RX key */ 925 B43_WARN_ON(mac_addr); 926 do_key_write(dev, index + 4, algorithm, key, key_len, NULL); 927 } 928 keyconf->hw_key_idx = index; 929 dev->key[index].keyconf = keyconf; 930 931 return 0; 932} 933 934static int b43_key_clear(struct b43_wldev *dev, int index) 935{ 936 if (B43_WARN_ON((index < 0) || (index >= dev->max_nr_keys))) 937 return -EINVAL; 938 do_key_write(dev, index, B43_SEC_ALGO_NONE, 939 NULL, B43_SEC_KEYSIZE, NULL); 940 if ((index <= 3) && !b43_new_kidx_api(dev)) { 941 do_key_write(dev, index + 4, B43_SEC_ALGO_NONE, 942 NULL, B43_SEC_KEYSIZE, NULL); 943 } 944 dev->key[index].keyconf = NULL; 945 946 return 0; 947} 948 949static void b43_clear_keys(struct b43_wldev *dev) 950{ 951 int i; 952 953 for (i = 0; i < dev->max_nr_keys; i++) 954 b43_key_clear(dev, i); 955} 956 957static void b43_dump_keymemory(struct b43_wldev *dev) 958{ 959 unsigned int i, index, offset; 960 DECLARE_MAC_BUF(macbuf); 961 u8 mac[ETH_ALEN]; 962 u16 algo; 963 u32 rcmta0; 964 u16 rcmta1; 965 u64 hf; 966 struct b43_key *key; 967 968 if (!b43_debug(dev, B43_DBG_KEYS)) 969 return; 970 971 hf = b43_hf_read(dev); 972 b43dbg(dev->wl, "Hardware key memory dump: USEDEFKEYS=%u\n", 973 !!(hf & B43_HF_USEDEFKEYS)); 974 for (index = 0; index < dev->max_nr_keys; index++) { 975 key = &(dev->key[index]); 976 printk(KERN_DEBUG "Key slot %02u: %s", 977 index, (key->keyconf == NULL) ? " " : "*"); 978 offset = dev->ktp + (index * B43_SEC_KEYSIZE); 979 for (i = 0; i < B43_SEC_KEYSIZE; i += 2) { 980 u16 tmp = b43_shm_read16(dev, B43_SHM_SHARED, offset + i); 981 printk("%02X%02X", (tmp & 0xFF), ((tmp >> 8) & 0xFF)); 982 } 983 984 algo = b43_shm_read16(dev, B43_SHM_SHARED, 985 B43_SHM_SH_KEYIDXBLOCK + (index * 2)); 986 printk(" Algo: %04X/%02X", algo, key->algorithm); 987 988 if (index >= 4) { 989 rcmta0 = b43_shm_read32(dev, B43_SHM_RCMTA, 990 ((index - 4) * 2) + 0); 991 rcmta1 = b43_shm_read16(dev, B43_SHM_RCMTA, 992 ((index - 4) * 2) + 1); 993 *((__le32 *)(&mac[0])) = cpu_to_le32(rcmta0); 994 *((__le16 *)(&mac[4])) = cpu_to_le16(rcmta1); 995 printk(" MAC: %s", 996 print_mac(macbuf, mac)); 997 } else 998 printk(" DEFAULT KEY"); 999 printk("\n"); 1000 } 1001} 1002 1003void b43_power_saving_ctl_bits(struct b43_wldev *dev, unsigned int ps_flags) 1004{ 1005 u32 macctl; 1006 u16 ucstat; 1007 bool hwps; 1008 bool awake; 1009 int i; 1010 1011 B43_WARN_ON((ps_flags & B43_PS_ENABLED) && 1012 (ps_flags & B43_PS_DISABLED)); 1013 B43_WARN_ON((ps_flags & B43_PS_AWAKE) && (ps_flags & B43_PS_ASLEEP)); 1014 1015 if (ps_flags & B43_PS_ENABLED) { 1016 hwps = 1; 1017 } else if (ps_flags & B43_PS_DISABLED) { 1018 hwps = 0; 1019 } else { 1020 //TODO: If powersave is not off and FIXME is not set and we are not in adhoc 1021 // and thus is not an AP and we are associated, set bit 25 1022 } 1023 if (ps_flags & B43_PS_AWAKE) { 1024 awake = 1; 1025 } else if (ps_flags & B43_PS_ASLEEP) { 1026 awake = 0; 1027 } else { 1028 //TODO: If the device is awake or this is an AP, or we are scanning, or FIXME, 1029 // or we are associated, or FIXME, or the latest PS-Poll packet sent was 1030 // successful, set bit26 1031 } 1032 1033/* FIXME: For now we force awake-on and hwps-off */ 1034 hwps = 0; 1035 awake = 1; 1036 1037 macctl = b43_read32(dev, B43_MMIO_MACCTL); 1038 if (hwps) 1039 macctl |= B43_MACCTL_HWPS; 1040 else 1041 macctl &= ~B43_MACCTL_HWPS; 1042 if (awake) 1043 macctl |= B43_MACCTL_AWAKE; 1044 else 1045 macctl &= ~B43_MACCTL_AWAKE; 1046 b43_write32(dev, B43_MMIO_MACCTL, macctl); 1047 /* Commit write */ 1048 b43_read32(dev, B43_MMIO_MACCTL); 1049 if (awake && dev->dev->id.revision >= 5) { 1050 /* Wait for the microcode to wake up. */ 1051 for (i = 0; i < 100; i++) { 1052 ucstat = b43_shm_read16(dev, B43_SHM_SHARED, 1053 B43_SHM_SH_UCODESTAT); 1054 if (ucstat != B43_SHM_SH_UCODESTAT_SLEEP) 1055 break; 1056 udelay(10); 1057 } 1058 } 1059} 1060 1061void b43_wireless_core_reset(struct b43_wldev *dev, u32 flags) 1062{ 1063 u32 tmslow; 1064 u32 macctl; 1065 1066 flags |= B43_TMSLOW_PHYCLKEN; 1067 flags |= B43_TMSLOW_PHYRESET; 1068 ssb_device_enable(dev->dev, flags); 1069 msleep(2); /* Wait for the PLL to turn on. */ 1070 1071 /* Now take the PHY out of Reset again */ 1072 tmslow = ssb_read32(dev->dev, SSB_TMSLOW); 1073 tmslow |= SSB_TMSLOW_FGC; 1074 tmslow &= ~B43_TMSLOW_PHYRESET; 1075 ssb_write32(dev->dev, SSB_TMSLOW, tmslow); 1076 ssb_read32(dev->dev, SSB_TMSLOW); /* flush */ 1077 msleep(1); 1078 tmslow &= ~SSB_TMSLOW_FGC; 1079 ssb_write32(dev->dev, SSB_TMSLOW, tmslow); 1080 ssb_read32(dev->dev, SSB_TMSLOW); /* flush */ 1081 msleep(1); 1082 1083 /* Turn Analog ON, but only if we already know the PHY-type. 1084 * This protects against very early setup where we don't know the 1085 * PHY-type, yet. wireless_core_reset will be called once again later, 1086 * when we know the PHY-type. */ 1087 if (dev->phy.ops) 1088 dev->phy.ops->switch_analog(dev, 1); 1089 1090 macctl = b43_read32(dev, B43_MMIO_MACCTL); 1091 macctl &= ~B43_MACCTL_GMODE; 1092 if (flags & B43_TMSLOW_GMODE) 1093 macctl |= B43_MACCTL_GMODE; 1094 macctl |= B43_MACCTL_IHR_ENABLED; 1095 b43_write32(dev, B43_MMIO_MACCTL, macctl); 1096} 1097 1098static void handle_irq_transmit_status(struct b43_wldev *dev) 1099{ 1100 u32 v0, v1; 1101 u16 tmp; 1102 struct b43_txstatus stat; 1103 1104 while (1) { 1105 v0 = b43_read32(dev, B43_MMIO_XMITSTAT_0); 1106 if (!(v0 & 0x00000001)) 1107 break; 1108 v1 = b43_read32(dev, B43_MMIO_XMITSTAT_1); 1109 1110 stat.cookie = (v0 >> 16); 1111 stat.seq = (v1 & 0x0000FFFF); 1112 stat.phy_stat = ((v1 & 0x00FF0000) >> 16); 1113 tmp = (v0 & 0x0000FFFF); 1114 stat.frame_count = ((tmp & 0xF000) >> 12); 1115 stat.rts_count = ((tmp & 0x0F00) >> 8); 1116 stat.supp_reason = ((tmp & 0x001C) >> 2); 1117 stat.pm_indicated = !!(tmp & 0x0080); 1118 stat.intermediate = !!(tmp & 0x0040); 1119 stat.for_ampdu = !!(tmp & 0x0020); 1120 stat.acked = !!(tmp & 0x0002); 1121 1122 b43_handle_txstatus(dev, &stat); 1123 } 1124} 1125 1126static void drain_txstatus_queue(struct b43_wldev *dev) 1127{ 1128 u32 dummy; 1129 1130 if (dev->dev->id.revision < 5) 1131 return; 1132 /* Read all entries from the microcode TXstatus FIFO 1133 * and throw them away. 1134 */ 1135 while (1) { 1136 dummy = b43_read32(dev, B43_MMIO_XMITSTAT_0); 1137 if (!(dummy & 0x00000001)) 1138 break; 1139 dummy = b43_read32(dev, B43_MMIO_XMITSTAT_1); 1140 } 1141} 1142 1143static u32 b43_jssi_read(struct b43_wldev *dev) 1144{ 1145 u32 val = 0; 1146 1147 val = b43_shm_read16(dev, B43_SHM_SHARED, 0x08A); 1148 val <<= 16; 1149 val |= b43_shm_read16(dev, B43_SHM_SHARED, 0x088); 1150 1151 return val; 1152} 1153 1154static void b43_jssi_write(struct b43_wldev *dev, u32 jssi) 1155{ 1156 b43_shm_write16(dev, B43_SHM_SHARED, 0x088, (jssi & 0x0000FFFF)); 1157 b43_shm_write16(dev, B43_SHM_SHARED, 0x08A, (jssi & 0xFFFF0000) >> 16); 1158} 1159 1160static void b43_generate_noise_sample(struct b43_wldev *dev) 1161{ 1162 b43_jssi_write(dev, 0x7F7F7F7F); 1163 b43_write32(dev, B43_MMIO_MACCMD, 1164 b43_read32(dev, B43_MMIO_MACCMD) | B43_MACCMD_BGNOISE); 1165} 1166 1167static void b43_calculate_link_quality(struct b43_wldev *dev) 1168{ 1169 /* Top half of Link Quality calculation. */ 1170 1171 if (dev->phy.type != B43_PHYTYPE_G) 1172 return; 1173 if (dev->noisecalc.calculation_running) 1174 return; 1175 dev->noisecalc.calculation_running = 1; 1176 dev->noisecalc.nr_samples = 0; 1177 1178 b43_generate_noise_sample(dev); 1179} 1180 1181static void handle_irq_noise(struct b43_wldev *dev) 1182{ 1183 struct b43_phy_g *phy = dev->phy.g; 1184 u16 tmp; 1185 u8 noise[4]; 1186 u8 i, j; 1187 s32 average; 1188 1189 /* Bottom half of Link Quality calculation. */ 1190 1191 if (dev->phy.type != B43_PHYTYPE_G) 1192 return; 1193 1194 /* Possible race condition: It might be possible that the user 1195 * changed to a different channel in the meantime since we 1196 * started the calculation. We ignore that fact, since it's 1197 * not really that much of a problem. The background noise is 1198 * an estimation only anyway. Slightly wrong results will get damped 1199 * by the averaging of the 8 sample rounds. Additionally the 1200 * value is shortlived. So it will be replaced by the next noise 1201 * calculation round soon. */ 1202 1203 B43_WARN_ON(!dev->noisecalc.calculation_running); 1204 *((__le32 *)noise) = cpu_to_le32(b43_jssi_read(dev)); 1205 if (noise[0] == 0x7F || noise[1] == 0x7F || 1206 noise[2] == 0x7F || noise[3] == 0x7F) 1207 goto generate_new; 1208 1209 /* Get the noise samples. */ 1210 B43_WARN_ON(dev->noisecalc.nr_samples >= 8); 1211 i = dev->noisecalc.nr_samples; 1212 noise[0] = clamp_val(noise[0], 0, ARRAY_SIZE(phy->nrssi_lt) - 1); 1213 noise[1] = clamp_val(noise[1], 0, ARRAY_SIZE(phy->nrssi_lt) - 1); 1214 noise[2] = clamp_val(noise[2], 0, ARRAY_SIZE(phy->nrssi_lt) - 1); 1215 noise[3] = clamp_val(noise[3], 0, ARRAY_SIZE(phy->nrssi_lt) - 1); 1216 dev->noisecalc.samples[i][0] = phy->nrssi_lt[noise[0]]; 1217 dev->noisecalc.samples[i][1] = phy->nrssi_lt[noise[1]]; 1218 dev->noisecalc.samples[i][2] = phy->nrssi_lt[noise[2]]; 1219 dev->noisecalc.samples[i][3] = phy->nrssi_lt[noise[3]]; 1220 dev->noisecalc.nr_samples++; 1221 if (dev->noisecalc.nr_samples == 8) { 1222 /* Calculate the Link Quality by the noise samples. */ 1223 average = 0; 1224 for (i = 0; i < 8; i++) { 1225 for (j = 0; j < 4; j++) 1226 average += dev->noisecalc.samples[i][j]; 1227 } 1228 average /= (8 * 4); 1229 average *= 125; 1230 average += 64; 1231 average /= 128; 1232 tmp = b43_shm_read16(dev, B43_SHM_SHARED, 0x40C); 1233 tmp = (tmp / 128) & 0x1F; 1234 if (tmp >= 8) 1235 average += 2; 1236 else 1237 average -= 25; 1238 if (tmp == 8) 1239 average -= 72; 1240 else 1241 average -= 48; 1242 1243 dev->stats.link_noise = average; 1244 dev->noisecalc.calculation_running = 0; 1245 return; 1246 } 1247generate_new: 1248 b43_generate_noise_sample(dev); 1249} 1250 1251static void handle_irq_tbtt_indication(struct b43_wldev *dev) 1252{ 1253 if (b43_is_mode(dev->wl, NL80211_IFTYPE_AP)) { 1254 ///TODO: PS TBTT 1255 } else { 1256 if (1 /*FIXME: the last PSpoll frame was sent successfully */ ) 1257 b43_power_saving_ctl_bits(dev, 0); 1258 } 1259 if (b43_is_mode(dev->wl, NL80211_IFTYPE_ADHOC)) 1260 dev->dfq_valid = 1; 1261} 1262 1263static void handle_irq_atim_end(struct b43_wldev *dev) 1264{ 1265 if (dev->dfq_valid) { 1266 b43_write32(dev, B43_MMIO_MACCMD, 1267 b43_read32(dev, B43_MMIO_MACCMD) 1268 | B43_MACCMD_DFQ_VALID); 1269 dev->dfq_valid = 0; 1270 } 1271} 1272 1273static void handle_irq_pmq(struct b43_wldev *dev) 1274{ 1275 u32 tmp; 1276 1277 //TODO: AP mode. 1278 1279 while (1) { 1280 tmp = b43_read32(dev, B43_MMIO_PS_STATUS); 1281 if (!(tmp & 0x00000008)) 1282 break; 1283 } 1284 /* 16bit write is odd, but correct. */ 1285 b43_write16(dev, B43_MMIO_PS_STATUS, 0x0002); 1286} 1287 1288static void b43_write_template_common(struct b43_wldev *dev, 1289 const u8 *data, u16 size, 1290 u16 ram_offset, 1291 u16 shm_size_offset, u8 rate) 1292{ 1293 u32 i, tmp; 1294 struct b43_plcp_hdr4 plcp; 1295 1296 plcp.data = 0; 1297 b43_generate_plcp_hdr(&plcp, size + FCS_LEN, rate); 1298 b43_ram_write(dev, ram_offset, le32_to_cpu(plcp.data)); 1299 ram_offset += sizeof(u32); 1300 /* The PLCP is 6 bytes long, but we only wrote 4 bytes, yet. 1301 * So leave the first two bytes of the next write blank. 1302 */ 1303 tmp = (u32) (data[0]) << 16; 1304 tmp |= (u32) (data[1]) << 24; 1305 b43_ram_write(dev, ram_offset, tmp); 1306 ram_offset += sizeof(u32); 1307 for (i = 2; i < size; i += sizeof(u32)) { 1308 tmp = (u32) (data[i + 0]); 1309 if (i + 1 < size) 1310 tmp |= (u32) (data[i + 1]) << 8; 1311 if (i + 2 < size) 1312 tmp |= (u32) (data[i + 2]) << 16; 1313 if (i + 3 < size) 1314 tmp |= (u32) (data[i + 3]) << 24; 1315 b43_ram_write(dev, ram_offset + i - 2, tmp); 1316 } 1317 b43_shm_write16(dev, B43_SHM_SHARED, shm_size_offset, 1318 size + sizeof(struct b43_plcp_hdr6)); 1319} 1320 1321/* Check if the use of the antenna that ieee80211 told us to 1322 * use is possible. This will fall back to DEFAULT. 1323 * "antenna_nr" is the antenna identifier we got from ieee80211. */ 1324u8 b43_ieee80211_antenna_sanitize(struct b43_wldev *dev, 1325 u8 antenna_nr) 1326{ 1327 u8 antenna_mask; 1328 1329 if (antenna_nr == 0) { 1330 /* Zero means "use default antenna". That's always OK. */ 1331 return 0; 1332 } 1333 1334 /* Get the mask of available antennas. */ 1335 if (dev->phy.gmode) 1336 antenna_mask = dev->dev->bus->sprom.ant_available_bg; 1337 else 1338 antenna_mask = dev->dev->bus->sprom.ant_available_a; 1339 1340 if (!(antenna_mask & (1 << (antenna_nr - 1)))) { 1341 /* This antenna is not available. Fall back to default. */ 1342 return 0; 1343 } 1344 1345 return antenna_nr; 1346} 1347 1348/* Convert a b43 antenna number value to the PHY TX control value. */ 1349static u16 b43_antenna_to_phyctl(int antenna) 1350{ 1351 switch (antenna) { 1352 case B43_ANTENNA0: 1353 return B43_TXH_PHY_ANT0; 1354 case B43_ANTENNA1: 1355 return B43_TXH_PHY_ANT1; 1356 case B43_ANTENNA2: 1357 return B43_TXH_PHY_ANT2; 1358 case B43_ANTENNA3: 1359 return B43_TXH_PHY_ANT3; 1360 case B43_ANTENNA_AUTO: 1361 return B43_TXH_PHY_ANT01AUTO; 1362 } 1363 B43_WARN_ON(1); 1364 return 0; 1365} 1366 1367static void b43_write_beacon_template(struct b43_wldev *dev, 1368 u16 ram_offset, 1369 u16 shm_size_offset) 1370{ 1371 unsigned int i, len, variable_len; 1372 const struct ieee80211_mgmt *bcn; 1373 const u8 *ie; 1374 bool tim_found = 0; 1375 unsigned int rate; 1376 u16 ctl; 1377 int antenna; 1378 struct ieee80211_tx_info *info = IEEE80211_SKB_CB(dev->wl->current_beacon); 1379 1380 bcn = (const struct ieee80211_mgmt *)(dev->wl->current_beacon->data); 1381 len = min((size_t) dev->wl->current_beacon->len, 1382 0x200 - sizeof(struct b43_plcp_hdr6)); 1383 rate = ieee80211_get_tx_rate(dev->wl->hw, info)->hw_value; 1384 1385 b43_write_template_common(dev, (const u8 *)bcn, 1386 len, ram_offset, shm_size_offset, rate); 1387 1388 /* Write the PHY TX control parameters. */ 1389 antenna = B43_ANTENNA_DEFAULT; 1390 antenna = b43_antenna_to_phyctl(antenna); 1391 ctl = b43_shm_read16(dev, B43_SHM_SHARED, B43_SHM_SH_BEACPHYCTL); 1392 /* We can't send beacons with short preamble. Would get PHY errors. */ 1393 ctl &= ~B43_TXH_PHY_SHORTPRMBL; 1394 ctl &= ~B43_TXH_PHY_ANT; 1395 ctl &= ~B43_TXH_PHY_ENC; 1396 ctl |= antenna; 1397 if (b43_is_cck_rate(rate)) 1398 ctl |= B43_TXH_PHY_ENC_CCK; 1399 else 1400 ctl |= B43_TXH_PHY_ENC_OFDM; 1401 b43_shm_write16(dev, B43_SHM_SHARED, B43_SHM_SH_BEACPHYCTL, ctl); 1402 1403 /* Find the position of the TIM and the DTIM_period value 1404 * and write them to SHM. */ 1405 ie = bcn->u.beacon.variable; 1406 variable_len = len - offsetof(struct ieee80211_mgmt, u.beacon.variable); 1407 for (i = 0; i < variable_len - 2; ) { 1408 uint8_t ie_id, ie_len; 1409 1410 ie_id = ie[i]; 1411 ie_len = ie[i + 1]; 1412 if (ie_id == 5) { 1413 u16 tim_position; 1414 u16 dtim_period; 1415 /* This is the TIM Information Element */ 1416 1417 /* Check whether the ie_len is in the beacon data range. */ 1418 if (variable_len < ie_len + 2 + i) 1419 break; 1420 /* A valid TIM is at least 4 bytes long. */ 1421 if (ie_len < 4) 1422 break; 1423 tim_found = 1; 1424 1425 tim_position = sizeof(struct b43_plcp_hdr6); 1426 tim_position += offsetof(struct ieee80211_mgmt, u.beacon.variable); 1427 tim_position += i; 1428 1429 dtim_period = ie[i + 3]; 1430 1431 b43_shm_write16(dev, B43_SHM_SHARED, 1432 B43_SHM_SH_TIMBPOS, tim_position); 1433 b43_shm_write16(dev, B43_SHM_SHARED, 1434 B43_SHM_SH_DTIMPER, dtim_period); 1435 break; 1436 } 1437 i += ie_len + 2; 1438 } 1439 if (!tim_found) { 1440 /* 1441 * If ucode wants to modify TIM do it behind the beacon, this 1442 * will happen, for example, when doing mesh networking. 1443 */ 1444 b43_shm_write16(dev, B43_SHM_SHARED, 1445 B43_SHM_SH_TIMBPOS, 1446 len + sizeof(struct b43_plcp_hdr6)); 1447 b43_shm_write16(dev, B43_SHM_SHARED, 1448 B43_SHM_SH_DTIMPER, 0); 1449 } 1450 b43dbg(dev->wl, "Updated beacon template at 0x%x\n", ram_offset); 1451} 1452 1453static void b43_write_probe_resp_plcp(struct b43_wldev *dev, 1454 u16 shm_offset, u16 size, 1455 struct ieee80211_rate *rate) 1456{ 1457 struct b43_plcp_hdr4 plcp; 1458 u32 tmp; 1459 __le16 dur; 1460 1461 plcp.data = 0; 1462 b43_generate_plcp_hdr(&plcp, size + FCS_LEN, rate->hw_value); 1463 dur = ieee80211_generic_frame_duration(dev->wl->hw, 1464 dev->wl->vif, size, 1465 rate); 1466 /* Write PLCP in two parts and timing for packet transfer */ 1467 tmp = le32_to_cpu(plcp.data); 1468 b43_shm_write16(dev, B43_SHM_SHARED, shm_offset, tmp & 0xFFFF); 1469 b43_shm_write16(dev, B43_SHM_SHARED, shm_offset + 2, tmp >> 16); 1470 b43_shm_write16(dev, B43_SHM_SHARED, shm_offset + 6, le16_to_cpu(dur)); 1471} 1472 1473/* Instead of using custom probe response template, this function 1474 * just patches custom beacon template by: 1475 * 1) Changing packet type 1476 * 2) Patching duration field 1477 * 3) Stripping TIM 1478 */ 1479static const u8 *b43_generate_probe_resp(struct b43_wldev *dev, 1480 u16 *dest_size, 1481 struct ieee80211_rate *rate) 1482{ 1483 const u8 *src_data; 1484 u8 *dest_data; 1485 u16 src_size, elem_size, src_pos, dest_pos; 1486 __le16 dur; 1487 struct ieee80211_hdr *hdr; 1488 size_t ie_start; 1489 1490 src_size = dev->wl->current_beacon->len; 1491 src_data = (const u8 *)dev->wl->current_beacon->data; 1492 1493 /* Get the start offset of the variable IEs in the packet. */ 1494 ie_start = offsetof(struct ieee80211_mgmt, u.probe_resp.variable); 1495 B43_WARN_ON(ie_start != offsetof(struct ieee80211_mgmt, u.beacon.variable)); 1496 1497 if (B43_WARN_ON(src_size < ie_start)) 1498 return NULL; 1499 1500 dest_data = kmalloc(src_size, GFP_ATOMIC); 1501 if (unlikely(!dest_data)) 1502 return NULL; 1503 1504 /* Copy the static data and all Information Elements, except the TIM. */ 1505 memcpy(dest_data, src_data, ie_start); 1506 src_pos = ie_start; 1507 dest_pos = ie_start; 1508 for ( ; src_pos < src_size - 2; src_pos += elem_size) { 1509 elem_size = src_data[src_pos + 1] + 2; 1510 if (src_data[src_pos] == 5) { 1511 /* This is the TIM. */ 1512 continue; 1513 } 1514 memcpy(dest_data + dest_pos, src_data + src_pos, 1515 elem_size); 1516 dest_pos += elem_size; 1517 } 1518 *dest_size = dest_pos; 1519 hdr = (struct ieee80211_hdr *)dest_data; 1520 1521 /* Set the frame control. */ 1522 hdr->frame_control = cpu_to_le16(IEEE80211_FTYPE_MGMT | 1523 IEEE80211_STYPE_PROBE_RESP); 1524 dur = ieee80211_generic_frame_duration(dev->wl->hw, 1525 dev->wl->vif, *dest_size, 1526 rate); 1527 hdr->duration_id = dur; 1528 1529 return dest_data; 1530} 1531 1532static void b43_write_probe_resp_template(struct b43_wldev *dev, 1533 u16 ram_offset, 1534 u16 shm_size_offset, 1535 struct ieee80211_rate *rate) 1536{ 1537 const u8 *probe_resp_data; 1538 u16 size; 1539 1540 size = dev->wl->current_beacon->len; 1541 probe_resp_data = b43_generate_probe_resp(dev, &size, rate); 1542 if (unlikely(!probe_resp_data)) 1543 return; 1544 1545 /* Looks like PLCP headers plus packet timings are stored for 1546 * all possible basic rates 1547 */ 1548 b43_write_probe_resp_plcp(dev, 0x31A, size, &b43_b_ratetable[0]); 1549 b43_write_probe_resp_plcp(dev, 0x32C, size, &b43_b_ratetable[1]); 1550 b43_write_probe_resp_plcp(dev, 0x33E, size, &b43_b_ratetable[2]); 1551 b43_write_probe_resp_plcp(dev, 0x350, size, &b43_b_ratetable[3]); 1552 1553 size = min((size_t) size, 0x200 - sizeof(struct b43_plcp_hdr6)); 1554 b43_write_template_common(dev, probe_resp_data, 1555 size, ram_offset, shm_size_offset, 1556 rate->hw_value); 1557 kfree(probe_resp_data); 1558} 1559 1560static void b43_upload_beacon0(struct b43_wldev *dev) 1561{ 1562 struct b43_wl *wl = dev->wl; 1563 1564 if (wl->beacon0_uploaded) 1565 return; 1566 b43_write_beacon_template(dev, 0x68, 0x18); 1567 /* FIXME: Probe resp upload doesn't really belong here, 1568 * but we don't use that feature anyway. */ 1569 b43_write_probe_resp_template(dev, 0x268, 0x4A, 1570 &__b43_ratetable[3]); 1571 wl->beacon0_uploaded = 1; 1572} 1573 1574static void b43_upload_beacon1(struct b43_wldev *dev) 1575{ 1576 struct b43_wl *wl = dev->wl; 1577 1578 if (wl->beacon1_uploaded) 1579 return; 1580 b43_write_beacon_template(dev, 0x468, 0x1A); 1581 wl->beacon1_uploaded = 1; 1582} 1583 1584static void handle_irq_beacon(struct b43_wldev *dev) 1585{ 1586 struct b43_wl *wl = dev->wl; 1587 u32 cmd, beacon0_valid, beacon1_valid; 1588 1589 if (!b43_is_mode(wl, NL80211_IFTYPE_AP) && 1590 !b43_is_mode(wl, NL80211_IFTYPE_MESH_POINT)) 1591 return; 1592 1593 /* This is the bottom half of the asynchronous beacon update. */ 1594 1595 /* Ignore interrupt in the future. */ 1596 dev->irq_savedstate &= ~B43_IRQ_BEACON; 1597 1598 cmd = b43_read32(dev, B43_MMIO_MACCMD); 1599 beacon0_valid = (cmd & B43_MACCMD_BEACON0_VALID); 1600 beacon1_valid = (cmd & B43_MACCMD_BEACON1_VALID); 1601 1602 /* Schedule interrupt manually, if busy. */ 1603 if (beacon0_valid && beacon1_valid) { 1604 b43_write32(dev, B43_MMIO_GEN_IRQ_REASON, B43_IRQ_BEACON); 1605 dev->irq_savedstate |= B43_IRQ_BEACON; 1606 return; 1607 } 1608 1609 if (unlikely(wl->beacon_templates_virgin)) { 1610 /* We never uploaded a beacon before. 1611 * Upload both templates now, but only mark one valid. */ 1612 wl->beacon_templates_virgin = 0; 1613 b43_upload_beacon0(dev); 1614 b43_upload_beacon1(dev); 1615 cmd = b43_read32(dev, B43_MMIO_MACCMD); 1616 cmd |= B43_MACCMD_BEACON0_VALID; 1617 b43_write32(dev, B43_MMIO_MACCMD, cmd); 1618 } else { 1619 if (!beacon0_valid) { 1620 b43_upload_beacon0(dev); 1621 cmd = b43_read32(dev, B43_MMIO_MACCMD); 1622 cmd |= B43_MACCMD_BEACON0_VALID; 1623 b43_write32(dev, B43_MMIO_MACCMD, cmd); 1624 } else if (!beacon1_valid) { 1625 b43_upload_beacon1(dev); 1626 cmd = b43_read32(dev, B43_MMIO_MACCMD); 1627 cmd |= B43_MACCMD_BEACON1_VALID; 1628 b43_write32(dev, B43_MMIO_MACCMD, cmd); 1629 } 1630 } 1631} 1632 1633static void b43_beacon_update_trigger_work(struct work_struct *work) 1634{ 1635 struct b43_wl *wl = container_of(work, struct b43_wl, 1636 beacon_update_trigger); 1637 struct b43_wldev *dev; 1638 1639 mutex_lock(&wl->mutex); 1640 dev = wl->current_dev; 1641 if (likely(dev && (b43_status(dev) >= B43_STAT_INITIALIZED))) { 1642 spin_lock_irq(&wl->irq_lock); 1643 /* update beacon right away or defer to irq */ 1644 dev->irq_savedstate = b43_read32(dev, B43_MMIO_GEN_IRQ_MASK); 1645 handle_irq_beacon(dev); 1646 /* The handler might have updated the IRQ mask. */ 1647 b43_write32(dev, B43_MMIO_GEN_IRQ_MASK, 1648 dev->irq_savedstate); 1649 mmiowb(); 1650 spin_unlock_irq(&wl->irq_lock); 1651 } 1652 mutex_unlock(&wl->mutex); 1653} 1654 1655/* Asynchronously update the packet templates in template RAM. 1656 * Locking: Requires wl->irq_lock to be locked. */ 1657static void b43_update_templates(struct b43_wl *wl) 1658{ 1659 struct sk_buff *beacon; 1660 1661 /* This is the top half of the ansynchronous beacon update. 1662 * The bottom half is the beacon IRQ. 1663 * Beacon update must be asynchronous to avoid sending an 1664 * invalid beacon. This can happen for example, if the firmware 1665 * transmits a beacon while we are updating it. */ 1666 1667 /* We could modify the existing beacon and set the aid bit in 1668 * the TIM field, but that would probably require resizing and 1669 * moving of data within the beacon template. 1670 * Simply request a new beacon and let mac80211 do the hard work. */ 1671 beacon = ieee80211_beacon_get(wl->hw, wl->vif); 1672 if (unlikely(!beacon)) 1673 return; 1674 1675 if (wl->current_beacon) 1676 dev_kfree_skb_any(wl->current_beacon); 1677 wl->current_beacon = beacon; 1678 wl->beacon0_uploaded = 0; 1679 wl->beacon1_uploaded = 0; 1680 queue_work(wl->hw->workqueue, &wl->beacon_update_trigger); 1681} 1682 1683static void b43_set_beacon_int(struct b43_wldev *dev, u16 beacon_int) 1684{ 1685 b43_time_lock(dev); 1686 if (dev->dev->id.revision >= 3) { 1687 b43_write32(dev, B43_MMIO_TSF_CFP_REP, (beacon_int << 16)); 1688 b43_write32(dev, B43_MMIO_TSF_CFP_START, (beacon_int << 10)); 1689 } else { 1690 b43_write16(dev, 0x606, (beacon_int >> 6)); 1691 b43_write16(dev, 0x610, beacon_int); 1692 } 1693 b43_time_unlock(dev); 1694 b43dbg(dev->wl, "Set beacon interval to %u\n", beacon_int); 1695} 1696 1697static void b43_handle_firmware_panic(struct b43_wldev *dev) 1698{ 1699 u16 reason; 1700 1701 /* Read the register that contains the reason code for the panic. */ 1702 reason = b43_shm_read16(dev, B43_SHM_SCRATCH, B43_FWPANIC_REASON_REG); 1703 b43err(dev->wl, "Whoopsy, firmware panic! Reason: %u\n", reason); 1704 1705 switch (reason) { 1706 default: 1707 b43dbg(dev->wl, "The panic reason is unknown.\n"); 1708 /* fallthrough */ 1709 case B43_FWPANIC_DIE: 1710 /* Do not restart the controller or firmware. 1711 * The device is nonfunctional from now on. 1712 * Restarting would result in this panic to trigger again, 1713 * so we avoid that recursion. */ 1714 break; 1715 case B43_FWPANIC_RESTART: 1716 b43_controller_restart(dev, "Microcode panic"); 1717 break; 1718 } 1719} 1720 1721static void handle_irq_ucode_debug(struct b43_wldev *dev) 1722{ 1723 unsigned int i, cnt; 1724 u16 reason, marker_id, marker_line; 1725 __le16 *buf; 1726 1727 /* The proprietary firmware doesn't have this IRQ. */ 1728 if (!dev->fw.opensource) 1729 return; 1730 1731 /* Read the register that contains the reason code for this IRQ. */ 1732 reason = b43_shm_read16(dev, B43_SHM_SCRATCH, B43_DEBUGIRQ_REASON_REG); 1733 1734 switch (reason) { 1735 case B43_DEBUGIRQ_PANIC: 1736 b43_handle_firmware_panic(dev); 1737 break; 1738 case B43_DEBUGIRQ_DUMP_SHM: 1739 if (!B43_DEBUG) 1740 break; /* Only with driver debugging enabled. */ 1741 buf = kmalloc(4096, GFP_ATOMIC); 1742 if (!buf) { 1743 b43dbg(dev->wl, "SHM-dump: Failed to allocate memory\n"); 1744 goto out; 1745 } 1746 for (i = 0; i < 4096; i += 2) { 1747 u16 tmp = b43_shm_read16(dev, B43_SHM_SHARED, i); 1748 buf[i / 2] = cpu_to_le16(tmp); 1749 } 1750 b43info(dev->wl, "Shared memory dump:\n"); 1751 print_hex_dump(KERN_INFO, "", DUMP_PREFIX_OFFSET, 1752 16, 2, buf, 4096, 1); 1753 kfree(buf); 1754 break; 1755 case B43_DEBUGIRQ_DUMP_REGS: 1756 if (!B43_DEBUG) 1757 break; /* Only with driver debugging enabled. */ 1758 b43info(dev->wl, "Microcode register dump:\n"); 1759 for (i = 0, cnt = 0; i < 64; i++) { 1760 u16 tmp = b43_shm_read16(dev, B43_SHM_SCRATCH, i); 1761 if (cnt == 0) 1762 printk(KERN_INFO); 1763 printk("r%02u: 0x%04X ", i, tmp); 1764 cnt++; 1765 if (cnt == 6) { 1766 printk("\n"); 1767 cnt = 0; 1768 } 1769 } 1770 printk("\n"); 1771 break; 1772 case B43_DEBUGIRQ_MARKER: 1773 if (!B43_DEBUG) 1774 break; /* Only with driver debugging enabled. */ 1775 marker_id = b43_shm_read16(dev, B43_SHM_SCRATCH, 1776 B43_MARKER_ID_REG); 1777 marker_line = b43_shm_read16(dev, B43_SHM_SCRATCH, 1778 B43_MARKER_LINE_REG); 1779 b43info(dev->wl, "The firmware just executed the MARKER(%u) " 1780 "at line number %u\n", 1781 marker_id, marker_line); 1782 break; 1783 default: 1784 b43dbg(dev->wl, "Debug-IRQ triggered for unknown reason: %u\n", 1785 reason); 1786 } 1787out: 1788 /* Acknowledge the debug-IRQ, so the firmware can continue. */ 1789 b43_shm_write16(dev, B43_SHM_SCRATCH, 1790 B43_DEBUGIRQ_REASON_REG, B43_DEBUGIRQ_ACK); 1791} 1792 1793/* Interrupt handler bottom-half */ 1794static void b43_interrupt_tasklet(struct b43_wldev *dev) 1795{ 1796 u32 reason; 1797 u32 dma_reason[ARRAY_SIZE(dev->dma_reason)]; 1798 u32 merged_dma_reason = 0; 1799 int i; 1800 unsigned long flags; 1801 1802 spin_lock_irqsave(&dev->wl->irq_lock, flags); 1803 1804 B43_WARN_ON(b43_status(dev) != B43_STAT_STARTED); 1805 1806 reason = dev->irq_reason; 1807 for (i = 0; i < ARRAY_SIZE(dma_reason); i++) { 1808 dma_reason[i] = dev->dma_reason[i]; 1809 merged_dma_reason |= dma_reason[i]; 1810 } 1811 1812 if (unlikely(reason & B43_IRQ_MAC_TXERR)) 1813 b43err(dev->wl, "MAC transmission error\n"); 1814 1815 if (unlikely(reason & B43_IRQ_PHY_TXERR)) { 1816 b43err(dev->wl, "PHY transmission error\n"); 1817 rmb(); 1818 if (unlikely(atomic_dec_and_test(&dev->phy.txerr_cnt))) { 1819 atomic_set(&dev->phy.txerr_cnt, 1820 B43_PHY_TX_BADNESS_LIMIT); 1821 b43err(dev->wl, "Too many PHY TX errors, " 1822 "restarting the controller\n"); 1823 b43_controller_restart(dev, "PHY TX errors"); 1824 } 1825 } 1826 1827 if (unlikely(merged_dma_reason & (B43_DMAIRQ_FATALMASK | 1828 B43_DMAIRQ_NONFATALMASK))) { 1829 if (merged_dma_reason & B43_DMAIRQ_FATALMASK) { 1830 b43err(dev->wl, "Fatal DMA error: " 1831 "0x%08X, 0x%08X, 0x%08X, " 1832 "0x%08X, 0x%08X, 0x%08X\n", 1833 dma_reason[0], dma_reason[1], 1834 dma_reason[2], dma_reason[3], 1835 dma_reason[4], dma_reason[5]); 1836 b43_controller_restart(dev, "DMA error"); 1837 mmiowb(); 1838 spin_unlock_irqrestore(&dev->wl->irq_lock, flags); 1839 return; 1840 } 1841 if (merged_dma_reason & B43_DMAIRQ_NONFATALMASK) { 1842 b43err(dev->wl, "DMA error: " 1843 "0x%08X, 0x%08X, 0x%08X, " 1844 "0x%08X, 0x%08X, 0x%08X\n", 1845 dma_reason[0], dma_reason[1], 1846 dma_reason[2], dma_reason[3], 1847 dma_reason[4], dma_reason[5]); 1848 } 1849 } 1850 1851 if (unlikely(reason & B43_IRQ_UCODE_DEBUG)) 1852 handle_irq_ucode_debug(dev); 1853 if (reason & B43_IRQ_TBTT_INDI) 1854 handle_irq_tbtt_indication(dev); 1855 if (reason & B43_IRQ_ATIM_END) 1856 handle_irq_atim_end(dev); 1857 if (reason & B43_IRQ_BEACON) 1858 handle_irq_beacon(dev); 1859 if (reason & B43_IRQ_PMQ) 1860 handle_irq_pmq(dev); 1861 if (reason & B43_IRQ_TXFIFO_FLUSH_OK) 1862 ;/* TODO */ 1863 if (reason & B43_IRQ_NOISESAMPLE_OK) 1864 handle_irq_noise(dev); 1865 1866 /* Check the DMA reason registers for received data. */ 1867 if (dma_reason[0] & B43_DMAIRQ_RX_DONE) { 1868 if (b43_using_pio_transfers(dev)) 1869 b43_pio_rx(dev->pio.rx_queue); 1870 else 1871 b43_dma_rx(dev->dma.rx_ring); 1872 } 1873 B43_WARN_ON(dma_reason[1] & B43_DMAIRQ_RX_DONE); 1874 B43_WARN_ON(dma_reason[2] & B43_DMAIRQ_RX_DONE); 1875 B43_WARN_ON(dma_reason[3] & B43_DMAIRQ_RX_DONE); 1876 B43_WARN_ON(dma_reason[4] & B43_DMAIRQ_RX_DONE); 1877 B43_WARN_ON(dma_reason[5] & B43_DMAIRQ_RX_DONE); 1878 1879 if (reason & B43_IRQ_TX_OK) 1880 handle_irq_transmit_status(dev); 1881 1882 b43_interrupt_enable(dev, dev->irq_savedstate); 1883 mmiowb(); 1884 spin_unlock_irqrestore(&dev->wl->irq_lock, flags); 1885} 1886 1887static void b43_interrupt_ack(struct b43_wldev *dev, u32 reason) 1888{ 1889 b43_write32(dev, B43_MMIO_GEN_IRQ_REASON, reason); 1890 1891 b43_write32(dev, B43_MMIO_DMA0_REASON, dev->dma_reason[0]); 1892 b43_write32(dev, B43_MMIO_DMA1_REASON, dev->dma_reason[1]); 1893 b43_write32(dev, B43_MMIO_DMA2_REASON, dev->dma_reason[2]); 1894 b43_write32(dev, B43_MMIO_DMA3_REASON, dev->dma_reason[3]); 1895 b43_write32(dev, B43_MMIO_DMA4_REASON, dev->dma_reason[4]); 1896 b43_write32(dev, B43_MMIO_DMA5_REASON, dev->dma_reason[5]); 1897} 1898 1899/* Interrupt handler top-half */ 1900static irqreturn_t b43_interrupt_handler(int irq, void *dev_id) 1901{ 1902 irqreturn_t ret = IRQ_NONE; 1903 struct b43_wldev *dev = dev_id; 1904 u32 reason; 1905 1906 if (!dev) 1907 return IRQ_NONE; 1908 1909 spin_lock(&dev->wl->irq_lock); 1910 1911 if (b43_status(dev) < B43_STAT_STARTED) 1912 goto out; 1913 reason = b43_read32(dev, B43_MMIO_GEN_IRQ_REASON); 1914 if (reason == 0xffffffff) /* shared IRQ */ 1915 goto out; 1916 ret = IRQ_HANDLED; 1917 reason &= b43_read32(dev, B43_MMIO_GEN_IRQ_MASK); 1918 if (!reason) 1919 goto out; 1920 1921 dev->dma_reason[0] = b43_read32(dev, B43_MMIO_DMA0_REASON) 1922 & 0x0001DC00; 1923 dev->dma_reason[1] = b43_read32(dev, B43_MMIO_DMA1_REASON) 1924 & 0x0000DC00; 1925 dev->dma_reason[2] = b43_read32(dev, B43_MMIO_DMA2_REASON) 1926 & 0x0000DC00; 1927 dev->dma_reason[3] = b43_read32(dev, B43_MMIO_DMA3_REASON) 1928 & 0x0001DC00; 1929 dev->dma_reason[4] = b43_read32(dev, B43_MMIO_DMA4_REASON) 1930 & 0x0000DC00; 1931 dev->dma_reason[5] = b43_read32(dev, B43_MMIO_DMA5_REASON) 1932 & 0x0000DC00; 1933 1934 b43_interrupt_ack(dev, reason); 1935 /* disable all IRQs. They are enabled again in the bottom half. */ 1936 dev->irq_savedstate = b43_interrupt_disable(dev, B43_IRQ_ALL); 1937 /* save the reason code and call our bottom half. */ 1938 dev->irq_reason = reason; 1939 tasklet_schedule(&dev->isr_tasklet); 1940 out: 1941 mmiowb(); 1942 spin_unlock(&dev->wl->irq_lock); 1943 1944 return ret; 1945} 1946 1947void b43_do_release_fw(struct b43_firmware_file *fw) 1948{ 1949 release_firmware(fw->data); 1950 fw->data = NULL; 1951 fw->filename = NULL; 1952} 1953 1954static void b43_release_firmware(struct b43_wldev *dev) 1955{ 1956 b43_do_release_fw(&dev->fw.ucode); 1957 b43_do_release_fw(&dev->fw.pcm); 1958 b43_do_release_fw(&dev->fw.initvals); 1959 b43_do_release_fw(&dev->fw.initvals_band); 1960} 1961 1962static void b43_print_fw_helptext(struct b43_wl *wl, bool error) 1963{ 1964 const char text[] = 1965 "You must go to " \ 1966 "http://wireless.kernel.org/en/users/Drivers/b43#devicefirmware " \ 1967 "and download the correct firmware for this driver version. " \ 1968 "Please carefully read all instructions on this website.\n"; 1969 1970 if (error) 1971 b43err(wl, text); 1972 else 1973 b43warn(wl, text); 1974} 1975 1976int b43_do_request_fw(struct b43_request_fw_context *ctx, 1977 const char *name, 1978 struct b43_firmware_file *fw) 1979{ 1980 const struct firmware *blob; 1981 struct b43_fw_header *hdr; 1982 u32 size; 1983 int err; 1984 1985 if (!name) { 1986 /* Don't fetch anything. Free possibly cached firmware. */ 1987 /* FIXME: We should probably keep it anyway, to save some headache 1988 * on suspend/resume with multiband devices. */ 1989 b43_do_release_fw(fw); 1990 return 0; 1991 } 1992 if (fw->filename) { 1993 if ((fw->type == ctx->req_type) && 1994 (strcmp(fw->filename, name) == 0)) 1995 return 0; /* Already have this fw. */ 1996 /* Free the cached firmware first. */ 1997 /* FIXME: We should probably do this later after we successfully 1998 * got the new fw. This could reduce headache with multiband devices. 1999 * We could also redesign this to cache the firmware for all possible 2000 * bands all the time. */ 2001 b43_do_release_fw(fw); 2002 } 2003 2004 switch (ctx->req_type) { 2005 case B43_FWTYPE_PROPRIETARY: 2006 snprintf(ctx->fwname, sizeof(ctx->fwname), 2007 "b43%s/%s.fw", 2008 modparam_fwpostfix, name); 2009 break; 2010 case B43_FWTYPE_OPENSOURCE: 2011 snprintf(ctx->fwname, sizeof(ctx->fwname), 2012 "b43-open%s/%s.fw", 2013 modparam_fwpostfix, name); 2014 break; 2015 default: 2016 B43_WARN_ON(1); 2017 return -ENOSYS; 2018 } 2019 err = request_firmware(&blob, ctx->fwname, ctx->dev->dev->dev); 2020 if (err == -ENOENT) { 2021 snprintf(ctx->errors[ctx->req_type], 2022 sizeof(ctx->errors[ctx->req_type]), 2023 "Firmware file \"%s\" not found\n", ctx->fwname); 2024 return err; 2025 } else if (err) { 2026 snprintf(ctx->errors[ctx->req_type], 2027 sizeof(ctx->errors[ctx->req_type]), 2028 "Firmware file \"%s\" request failed (err=%d)\n", 2029 ctx->fwname, err); 2030 return err; 2031 } 2032 if (blob->size < sizeof(struct b43_fw_header)) 2033 goto err_format; 2034 hdr = (struct b43_fw_header *)(blob->data); 2035 switch (hdr->type) { 2036 case B43_FW_TYPE_UCODE: 2037 case B43_FW_TYPE_PCM: 2038 size = be32_to_cpu(hdr->size); 2039 if (size != blob->size - sizeof(struct b43_fw_header)) 2040 goto err_format; 2041 /* fallthrough */ 2042 case B43_FW_TYPE_IV: 2043 if (hdr->ver != 1) 2044 goto err_format; 2045 break; 2046 default: 2047 goto err_format; 2048 } 2049 2050 fw->data = blob; 2051 fw->filename = name; 2052 fw->type = ctx->req_type; 2053 2054 return 0; 2055 2056err_format: 2057 snprintf(ctx->errors[ctx->req_type], 2058 sizeof(ctx->errors[ctx->req_type]), 2059 "Firmware file \"%s\" format error.\n", ctx->fwname); 2060 release_firmware(blob); 2061 2062 return -EPROTO; 2063} 2064 2065static int b43_try_request_fw(struct b43_request_fw_context *ctx) 2066{ 2067 struct b43_wldev *dev = ctx->dev; 2068 struct b43_firmware *fw = &ctx->dev->fw; 2069 const u8 rev = ctx->dev->dev->id.revision; 2070 const char *filename; 2071 u32 tmshigh; 2072 int err; 2073 2074 /* Get microcode */ 2075 tmshigh = ssb_read32(dev->dev, SSB_TMSHIGH); 2076 if ((rev >= 5) && (rev <= 10)) 2077 filename = "ucode5"; 2078 else if ((rev >= 11) && (rev <= 12)) 2079 filename = "ucode11"; 2080 else if (rev >= 13) 2081 filename = "ucode13"; 2082 else 2083 goto err_no_ucode; 2084 err = b43_do_request_fw(ctx, filename, &fw->ucode); 2085 if (err) 2086 goto err_load; 2087 2088 /* Get PCM code */ 2089 if ((rev >= 5) && (rev <= 10)) 2090 filename = "pcm5"; 2091 else if (rev >= 11) 2092 filename = NULL; 2093 else 2094 goto err_no_pcm; 2095 fw->pcm_request_failed = 0; 2096 err = b43_do_request_fw(ctx, filename, &fw->pcm); 2097 if (err == -ENOENT) { 2098 /* We did not find a PCM file? Not fatal, but 2099 * core rev <= 10 must do without hwcrypto then. */ 2100 fw->pcm_request_failed = 1; 2101 } else if (err) 2102 goto err_load; 2103 2104 /* Get initvals */ 2105 switch (dev->phy.type) { 2106 case B43_PHYTYPE_A: 2107 if ((rev >= 5) && (rev <= 10)) { 2108 if (tmshigh & B43_TMSHIGH_HAVE_2GHZ_PHY) 2109 filename = "a0g1initvals5"; 2110 else 2111 filename = "a0g0initvals5"; 2112 } else 2113 goto err_no_initvals; 2114 break; 2115 case B43_PHYTYPE_G: 2116 if ((rev >= 5) && (rev <= 10)) 2117 filename = "b0g0initvals5"; 2118 else if (rev >= 13) 2119 filename = "b0g0initvals13"; 2120 else 2121 goto err_no_initvals; 2122 break; 2123 case B43_PHYTYPE_N: 2124 if ((rev >= 11) && (rev <= 12)) 2125 filename = "n0initvals11"; 2126 else 2127 goto err_no_initvals; 2128 break; 2129 default: 2130 goto err_no_initvals; 2131 } 2132 err = b43_do_request_fw(ctx, filename, &fw->initvals); 2133 if (err) 2134 goto err_load; 2135 2136 /* Get bandswitch initvals */ 2137 switch (dev->phy.type) { 2138 case B43_PHYTYPE_A: 2139 if ((rev >= 5) && (rev <= 10)) { 2140 if (tmshigh & B43_TMSHIGH_HAVE_2GHZ_PHY) 2141 filename = "a0g1bsinitvals5"; 2142 else 2143 filename = "a0g0bsinitvals5"; 2144 } else if (rev >= 11) 2145 filename = NULL; 2146 else 2147 goto err_no_initvals; 2148 break; 2149 case B43_PHYTYPE_G: 2150 if ((rev >= 5) && (rev <= 10)) 2151 filename = "b0g0bsinitvals5"; 2152 else if (rev >= 11) 2153 filename = NULL; 2154 else 2155 goto err_no_initvals; 2156 break; 2157 case B43_PHYTYPE_N: 2158 if ((rev >= 11) && (rev <= 12)) 2159 filename = "n0bsinitvals11"; 2160 else 2161 goto err_no_initvals; 2162 break; 2163 default: 2164 goto err_no_initvals; 2165 } 2166 err = b43_do_request_fw(ctx, filename, &fw->initvals_band); 2167 if (err) 2168 goto err_load; 2169 2170 return 0; 2171 2172err_no_ucode: 2173 err = ctx->fatal_failure = -EOPNOTSUPP; 2174 b43err(dev->wl, "The driver does not know which firmware (ucode) " 2175 "is required for your device (wl-core rev %u)\n", rev); 2176 goto error; 2177 2178err_no_pcm: 2179 err = ctx->fatal_failure = -EOPNOTSUPP; 2180 b43err(dev->wl, "The driver does not know which firmware (PCM) " 2181 "is required for your device (wl-core rev %u)\n", rev); 2182 goto error; 2183 2184err_no_initvals: 2185 err = ctx->fatal_failure = -EOPNOTSUPP; 2186 b43err(dev->wl, "The driver does not know which firmware (initvals) " 2187 "is required for your device (wl-core rev %u)\n", rev); 2188 goto error; 2189 2190err_load: 2191 /* We failed to load this firmware image. The error message 2192 * already is in ctx->errors. Return and let our caller decide 2193 * what to do. */ 2194 goto error; 2195 2196error: 2197 b43_release_firmware(dev); 2198 return err; 2199} 2200 2201static int b43_request_firmware(struct b43_wldev *dev) 2202{ 2203 struct b43_request_fw_context *ctx; 2204 unsigned int i; 2205 int err; 2206 const char *errmsg; 2207 2208 ctx = kzalloc(sizeof(*ctx), GFP_KERNEL); 2209 if (!ctx) 2210 return -ENOMEM; 2211 ctx->dev = dev; 2212 2213 ctx->req_type = B43_FWTYPE_PROPRIETARY; 2214 err = b43_try_request_fw(ctx); 2215 if (!err) 2216 goto out; /* Successfully loaded it. */ 2217 err = ctx->fatal_failure; 2218 if (err) 2219 goto out; 2220 2221 ctx->req_type = B43_FWTYPE_OPENSOURCE; 2222 err = b43_try_request_fw(ctx); 2223 if (!err) 2224 goto out; /* Successfully loaded it. */ 2225 err = ctx->fatal_failure; 2226 if (err) 2227 goto out; 2228 2229 /* Could not find a usable firmware. Print the errors. */ 2230 for (i = 0; i < B43_NR_FWTYPES; i++) { 2231 errmsg = ctx->errors[i]; 2232 if (strlen(errmsg)) 2233 b43err(dev->wl, errmsg); 2234 } 2235 b43_print_fw_helptext(dev->wl, 1); 2236 err = -ENOENT; 2237 2238out: 2239 kfree(ctx); 2240 return err; 2241} 2242 2243static int b43_upload_microcode(struct b43_wldev *dev) 2244{ 2245 const size_t hdr_len = sizeof(struct b43_fw_header); 2246 const __be32 *data; 2247 unsigned int i, len; 2248 u16 fwrev, fwpatch, fwdate, fwtime; 2249 u32 tmp, macctl; 2250 int err = 0; 2251 2252 /* Jump the microcode PSM to offset 0 */ 2253 macctl = b43_read32(dev, B43_MMIO_MACCTL); 2254 B43_WARN_ON(macctl & B43_MACCTL_PSM_RUN); 2255 macctl |= B43_MACCTL_PSM_JMP0; 2256 b43_write32(dev, B43_MMIO_MACCTL, macctl); 2257 /* Zero out all microcode PSM registers and shared memory. */ 2258 for (i = 0; i < 64; i++) 2259 b43_shm_write16(dev, B43_SHM_SCRATCH, i, 0); 2260 for (i = 0; i < 4096; i += 2) 2261 b43_shm_write16(dev, B43_SHM_SHARED, i, 0); 2262 2263 /* Upload Microcode. */ 2264 data = (__be32 *) (dev->fw.ucode.data->data + hdr_len); 2265 len = (dev->fw.ucode.data->size - hdr_len) / sizeof(__be32); 2266 b43_shm_control_word(dev, B43_SHM_UCODE | B43_SHM_AUTOINC_W, 0x0000); 2267 for (i = 0; i < len; i++) { 2268 b43_write32(dev, B43_MMIO_SHM_DATA, be32_to_cpu(data[i])); 2269 udelay(10); 2270 } 2271 2272 if (dev->fw.pcm.data) { 2273 /* Upload PCM data. */ 2274 data = (__be32 *) (dev->fw.pcm.data->data + hdr_len); 2275 len = (dev->fw.pcm.data->size - hdr_len) / sizeof(__be32); 2276 b43_shm_control_word(dev, B43_SHM_HW, 0x01EA); 2277 b43_write32(dev, B43_MMIO_SHM_DATA, 0x00004000); 2278 /* No need for autoinc bit in SHM_HW */ 2279 b43_shm_control_word(dev, B43_SHM_HW, 0x01EB); 2280 for (i = 0; i < len; i++) { 2281 b43_write32(dev, B43_MMIO_SHM_DATA, be32_to_cpu(data[i])); 2282 udelay(10); 2283 } 2284 } 2285 2286 b43_write32(dev, B43_MMIO_GEN_IRQ_REASON, B43_IRQ_ALL); 2287 2288 /* Start the microcode PSM */ 2289 macctl = b43_read32(dev, B43_MMIO_MACCTL); 2290 macctl &= ~B43_MACCTL_PSM_JMP0; 2291 macctl |= B43_MACCTL_PSM_RUN; 2292 b43_write32(dev, B43_MMIO_MACCTL, macctl); 2293 2294 /* Wait for the microcode to load and respond */ 2295 i = 0; 2296 while (1) { 2297 tmp = b43_read32(dev, B43_MMIO_GEN_IRQ_REASON); 2298 if (tmp == B43_IRQ_MAC_SUSPENDED) 2299 break; 2300 i++; 2301 if (i >= 20) { 2302 b43err(dev->wl, "Microcode not responding\n"); 2303 b43_print_fw_helptext(dev->wl, 1); 2304 err = -ENODEV; 2305 goto error; 2306 } 2307 msleep_interruptible(50); 2308 if (signal_pending(current)) { 2309 err = -EINTR; 2310 goto error; 2311 } 2312 } 2313 b43_read32(dev, B43_MMIO_GEN_IRQ_REASON); /* dummy read */ 2314 2315 /* Get and check the revisions. */ 2316 fwrev = b43_shm_read16(dev, B43_SHM_SHARED, B43_SHM_SH_UCODEREV); 2317 fwpatch = b43_shm_read16(dev, B43_SHM_SHARED, B43_SHM_SH_UCODEPATCH); 2318 fwdate = b43_shm_read16(dev, B43_SHM_SHARED, B43_SHM_SH_UCODEDATE); 2319 fwtime = b43_shm_read16(dev, B43_SHM_SHARED, B43_SHM_SH_UCODETIME); 2320 2321 if (fwrev <= 0x128) { 2322 b43err(dev->wl, "YOUR FIRMWARE IS TOO OLD. Firmware from " 2323 "binary drivers older than version 4.x is unsupported. " 2324 "You must upgrade your firmware files.\n"); 2325 b43_print_fw_helptext(dev->wl, 1); 2326 err = -EOPNOTSUPP; 2327 goto error; 2328 } 2329 dev->fw.rev = fwrev; 2330 dev->fw.patch = fwpatch; 2331 dev->fw.opensource = (fwdate == 0xFFFF); 2332 2333 if (dev->fw.opensource) { 2334 /* Patchlevel info is encoded in the "time" field. */ 2335 dev->fw.patch = fwtime; 2336 b43info(dev->wl, "Loading OpenSource firmware version %u.%u%s\n", 2337 dev->fw.rev, dev->fw.patch, 2338 dev->fw.pcm_request_failed ? " (Hardware crypto not supported)" : ""); 2339 } else { 2340 b43info(dev->wl, "Loading firmware version %u.%u " 2341 "(20%.2i-%.2i-%.2i %.2i:%.2i:%.2i)\n", 2342 fwrev, fwpatch, 2343 (fwdate >> 12) & 0xF, (fwdate >> 8) & 0xF, fwdate & 0xFF, 2344 (fwtime >> 11) & 0x1F, (fwtime >> 5) & 0x3F, fwtime & 0x1F); 2345 if (dev->fw.pcm_request_failed) { 2346 b43warn(dev->wl, "No \"pcm5.fw\" firmware file found. " 2347 "Hardware accelerated cryptography is disabled.\n"); 2348 b43_print_fw_helptext(dev->wl, 0); 2349 } 2350 } 2351 2352 if (b43_is_old_txhdr_format(dev)) { 2353 /* We're over the deadline, but we keep support for old fw 2354 * until it turns out to be in major conflict with something new. */ 2355 b43warn(dev->wl, "You are using an old firmware image. " 2356 "Support for old firmware will be removed soon " 2357 "(official deadline was July 2008).\n"); 2358 b43_print_fw_helptext(dev->wl, 0); 2359 } 2360 2361 return 0; 2362 2363error: 2364 macctl = b43_read32(dev, B43_MMIO_MACCTL); 2365 macctl &= ~B43_MACCTL_PSM_RUN; 2366 macctl |= B43_MACCTL_PSM_JMP0; 2367 b43_write32(dev, B43_MMIO_MACCTL, macctl); 2368 2369 return err; 2370} 2371 2372static int b43_write_initvals(struct b43_wldev *dev, 2373 const struct b43_iv *ivals, 2374 size_t count, 2375 size_t array_size) 2376{ 2377 const struct b43_iv *iv; 2378 u16 offset; 2379 size_t i; 2380 bool bit32; 2381 2382 BUILD_BUG_ON(sizeof(struct b43_iv) != 6); 2383 iv = ivals; 2384 for (i = 0; i < count; i++) { 2385 if (array_size < sizeof(iv->offset_size)) 2386 goto err_format; 2387 array_size -= sizeof(iv->offset_size); 2388 offset = be16_to_cpu(iv->offset_size); 2389 bit32 = !!(offset & B43_IV_32BIT); 2390 offset &= B43_IV_OFFSET_MASK; 2391 if (offset >= 0x1000) 2392 goto err_format; 2393 if (bit32) { 2394 u32 value; 2395 2396 if (array_size < sizeof(iv->data.d32)) 2397 goto err_format; 2398 array_size -= sizeof(iv->data.d32); 2399 2400 value = get_unaligned_be32(&iv->data.d32); 2401 b43_write32(dev, offset, value); 2402 2403 iv = (const struct b43_iv *)((const uint8_t *)iv + 2404 sizeof(__be16) + 2405 sizeof(__be32)); 2406 } else { 2407 u16 value; 2408 2409 if (array_size < sizeof(iv->data.d16)) 2410 goto err_format; 2411 array_size -= sizeof(iv->data.d16); 2412 2413 value = be16_to_cpu(iv->data.d16); 2414 b43_write16(dev, offset, value); 2415 2416 iv = (const struct b43_iv *)((const uint8_t *)iv + 2417 sizeof(__be16) + 2418 sizeof(__be16)); 2419 } 2420 } 2421 if (array_size) 2422 goto err_format; 2423 2424 return 0; 2425 2426err_format: 2427 b43err(dev->wl, "Initial Values Firmware file-format error.\n"); 2428 b43_print_fw_helptext(dev->wl, 1); 2429 2430 return -EPROTO; 2431} 2432 2433static int b43_upload_initvals(struct b43_wldev *dev) 2434{ 2435 const size_t hdr_len = sizeof(struct b43_fw_header); 2436 const struct b43_fw_header *hdr; 2437 struct b43_firmware *fw = &dev->fw; 2438 const struct b43_iv *ivals; 2439 size_t count; 2440 int err; 2441 2442 hdr = (const struct b43_fw_header *)(fw->initvals.data->data); 2443 ivals = (const struct b43_iv *)(fw->initvals.data->data + hdr_len); 2444 count = be32_to_cpu(hdr->size); 2445 err = b43_write_initvals(dev, ivals, count, 2446 fw->initvals.data->size - hdr_len); 2447 if (err) 2448 goto out; 2449 if (fw->initvals_band.data) { 2450 hdr = (const struct b43_fw_header *)(fw->initvals_band.data->data); 2451 ivals = (const struct b43_iv *)(fw->initvals_band.data->data + hdr_len); 2452 count = be32_to_cpu(hdr->size); 2453 err = b43_write_initvals(dev, ivals, count, 2454 fw->initvals_band.data->size - hdr_len); 2455 if (err) 2456 goto out; 2457 } 2458out: 2459 2460 return err; 2461} 2462 2463/* Initialize the GPIOs 2464 * http://bcm-specs.sipsolutions.net/GPIO 2465 */ 2466static int b43_gpio_init(struct b43_wldev *dev) 2467{ 2468 struct ssb_bus *bus = dev->dev->bus; 2469 struct ssb_device *gpiodev, *pcidev = NULL; 2470 u32 mask, set; 2471 2472 b43_write32(dev, B43_MMIO_MACCTL, b43_read32(dev, B43_MMIO_MACCTL) 2473 & ~B43_MACCTL_GPOUTSMSK); 2474 2475 b43_write16(dev, B43_MMIO_GPIO_MASK, b43_read16(dev, B43_MMIO_GPIO_MASK) 2476 | 0x000F); 2477 2478 mask = 0x0000001F; 2479 set = 0x0000000F; 2480 if (dev->dev->bus->chip_id == 0x4301) { 2481 mask |= 0x0060; 2482 set |= 0x0060; 2483 } 2484 if (0 /* FIXME: conditional unknown */ ) { 2485 b43_write16(dev, B43_MMIO_GPIO_MASK, 2486 b43_read16(dev, B43_MMIO_GPIO_MASK) 2487 | 0x0100); 2488 mask |= 0x0180; 2489 set |= 0x0180; 2490 } 2491 if (dev->dev->bus->sprom.boardflags_lo & B43_BFL_PACTRL) { 2492 b43_write16(dev, B43_MMIO_GPIO_MASK, 2493 b43_read16(dev, B43_MMIO_GPIO_MASK) 2494 | 0x0200); 2495 mask |= 0x0200; 2496 set |= 0x0200; 2497 } 2498 if (dev->dev->id.revision >= 2) 2499 mask |= 0x0010; /* FIXME: This is redundant. */ 2500 2501#ifdef CONFIG_SSB_DRIVER_PCICORE 2502 pcidev = bus->pcicore.dev; 2503#endif 2504 gpiodev = bus->chipco.dev ? : pcidev; 2505 if (!gpiodev) 2506 return 0; 2507 ssb_write32(gpiodev, B43_GPIO_CONTROL, 2508 (ssb_read32(gpiodev, B43_GPIO_CONTROL) 2509 & mask) | set); 2510 2511 return 0; 2512} 2513 2514/* Turn off all GPIO stuff. Call this on module unload, for example. */ 2515static void b43_gpio_cleanup(struct b43_wldev *dev) 2516{ 2517 struct ssb_bus *bus = dev->dev->bus; 2518 struct ssb_device *gpiodev, *pcidev = NULL; 2519 2520#ifdef CONFIG_SSB_DRIVER_PCICORE 2521 pcidev = bus->pcicore.dev; 2522#endif 2523 gpiodev = bus->chipco.dev ? : pcidev; 2524 if (!gpiodev) 2525 return; 2526 ssb_write32(gpiodev, B43_GPIO_CONTROL, 0); 2527} 2528 2529/* http://bcm-specs.sipsolutions.net/EnableMac */ 2530void b43_mac_enable(struct b43_wldev *dev) 2531{ 2532 if (b43_debug(dev, B43_DBG_FIRMWARE)) { 2533 u16 fwstate; 2534 2535 fwstate = b43_shm_read16(dev, B43_SHM_SHARED, 2536 B43_SHM_SH_UCODESTAT); 2537 if ((fwstate != B43_SHM_SH_UCODESTAT_SUSP) && 2538 (fwstate != B43_SHM_SH_UCODESTAT_SLEEP)) { 2539 b43err(dev->wl, "b43_mac_enable(): The firmware " 2540 "should be suspended, but current state is %u\n", 2541 fwstate); 2542 } 2543 } 2544 2545 dev->mac_suspended--; 2546 B43_WARN_ON(dev->mac_suspended < 0); 2547 if (dev->mac_suspended == 0) { 2548 b43_write32(dev, B43_MMIO_MACCTL, 2549 b43_read32(dev, B43_MMIO_MACCTL) 2550 | B43_MACCTL_ENABLED); 2551 b43_write32(dev, B43_MMIO_GEN_IRQ_REASON, 2552 B43_IRQ_MAC_SUSPENDED); 2553 /* Commit writes */ 2554 b43_read32(dev, B43_MMIO_MACCTL); 2555 b43_read32(dev, B43_MMIO_GEN_IRQ_REASON); 2556 b43_power_saving_ctl_bits(dev, 0); 2557 } 2558} 2559 2560/* http://bcm-specs.sipsolutions.net/SuspendMAC */ 2561void b43_mac_suspend(struct b43_wldev *dev) 2562{ 2563 int i; 2564 u32 tmp; 2565 2566 might_sleep(); 2567 B43_WARN_ON(dev->mac_suspended < 0); 2568 2569 if (dev->mac_suspended == 0) { 2570 b43_power_saving_ctl_bits(dev, B43_PS_AWAKE); 2571 b43_write32(dev, B43_MMIO_MACCTL, 2572 b43_read32(dev, B43_MMIO_MACCTL) 2573 & ~B43_MACCTL_ENABLED); 2574 /* force pci to flush the write */ 2575 b43_read32(dev, B43_MMIO_MACCTL); 2576 for (i = 35; i; i--) { 2577 tmp = b43_read32(dev, B43_MMIO_GEN_IRQ_REASON); 2578 if (tmp & B43_IRQ_MAC_SUSPENDED) 2579 goto out; 2580 udelay(10); 2581 } 2582 /* Hm, it seems this will take some time. Use msleep(). */ 2583 for (i = 40; i; i--) { 2584 tmp = b43_read32(dev, B43_MMIO_GEN_IRQ_REASON); 2585 if (tmp & B43_IRQ_MAC_SUSPENDED) 2586 goto out; 2587 msleep(1); 2588 } 2589 b43err(dev->wl, "MAC suspend failed\n"); 2590 } 2591out: 2592 dev->mac_suspended++; 2593} 2594 2595static void b43_adjust_opmode(struct b43_wldev *dev) 2596{ 2597 struct b43_wl *wl = dev->wl; 2598 u32 ctl; 2599 u16 cfp_pretbtt; 2600 2601 ctl = b43_read32(dev, B43_MMIO_MACCTL); 2602 /* Reset status to STA infrastructure mode. */ 2603 ctl &= ~B43_MACCTL_AP; 2604 ctl &= ~B43_MACCTL_KEEP_CTL; 2605 ctl &= ~B43_MACCTL_KEEP_BADPLCP; 2606 ctl &= ~B43_MACCTL_KEEP_BAD; 2607 ctl &= ~B43_MACCTL_PROMISC; 2608 ctl &= ~B43_MACCTL_BEACPROMISC; 2609 ctl |= B43_MACCTL_INFRA; 2610 2611 if (b43_is_mode(wl, NL80211_IFTYPE_AP) || 2612 b43_is_mode(wl, NL80211_IFTYPE_MESH_POINT)) 2613 ctl |= B43_MACCTL_AP; 2614 else if (b43_is_mode(wl, NL80211_IFTYPE_ADHOC)) 2615 ctl &= ~B43_MACCTL_INFRA; 2616 2617 if (wl->filter_flags & FIF_CONTROL) 2618 ctl |= B43_MACCTL_KEEP_CTL; 2619 if (wl->filter_flags & FIF_FCSFAIL) 2620 ctl |= B43_MACCTL_KEEP_BAD; 2621 if (wl->filter_flags & FIF_PLCPFAIL) 2622 ctl |= B43_MACCTL_KEEP_BADPLCP; 2623 if (wl->filter_flags & FIF_PROMISC_IN_BSS) 2624 ctl |= B43_MACCTL_PROMISC; 2625 if (wl->filter_flags & FIF_BCN_PRBRESP_PROMISC) 2626 ctl |= B43_MACCTL_BEACPROMISC; 2627 2628 /* Workaround: On old hardware the HW-MAC-address-filter 2629 * doesn't work properly, so always run promisc in filter 2630 * it in software. */ 2631 if (dev->dev->id.revision <= 4) 2632 ctl |= B43_MACCTL_PROMISC; 2633 2634 b43_write32(dev, B43_MMIO_MACCTL, ctl); 2635 2636 cfp_pretbtt = 2; 2637 if ((ctl & B43_MACCTL_INFRA) && !(ctl & B43_MACCTL_AP)) { 2638 if (dev->dev->bus->chip_id == 0x4306 && 2639 dev->dev->bus->chip_rev == 3) 2640 cfp_pretbtt = 100; 2641 else 2642 cfp_pretbtt = 50; 2643 } 2644 b43_write16(dev, 0x612, cfp_pretbtt); 2645} 2646 2647static void b43_rate_memory_write(struct b43_wldev *dev, u16 rate, int is_ofdm) 2648{ 2649 u16 offset; 2650 2651 if (is_ofdm) { 2652 offset = 0x480; 2653 offset += (b43_plcp_get_ratecode_ofdm(rate) & 0x000F) * 2; 2654 } else { 2655 offset = 0x4C0; 2656 offset += (b43_plcp_get_ratecode_cck(rate) & 0x000F) * 2; 2657 } 2658 b43_shm_write16(dev, B43_SHM_SHARED, offset + 0x20, 2659 b43_shm_read16(dev, B43_SHM_SHARED, offset)); 2660} 2661 2662static void b43_rate_memory_init(struct b43_wldev *dev) 2663{ 2664 switch (dev->phy.type) { 2665 case B43_PHYTYPE_A: 2666 case B43_PHYTYPE_G: 2667 case B43_PHYTYPE_N: 2668 b43_rate_memory_write(dev, B43_OFDM_RATE_6MB, 1); 2669 b43_rate_memory_write(dev, B43_OFDM_RATE_12MB, 1); 2670 b43_rate_memory_write(dev, B43_OFDM_RATE_18MB, 1); 2671 b43_rate_memory_write(dev, B43_OFDM_RATE_24MB, 1); 2672 b43_rate_memory_write(dev, B43_OFDM_RATE_36MB, 1); 2673 b43_rate_memory_write(dev, B43_OFDM_RATE_48MB, 1); 2674 b43_rate_memory_write(dev, B43_OFDM_RATE_54MB, 1); 2675 if (dev->phy.type == B43_PHYTYPE_A) 2676 break; 2677 /* fallthrough */ 2678 case B43_PHYTYPE_B: 2679 b43_rate_memory_write(dev, B43_CCK_RATE_1MB, 0); 2680 b43_rate_memory_write(dev, B43_CCK_RATE_2MB, 0); 2681 b43_rate_memory_write(dev, B43_CCK_RATE_5MB, 0); 2682 b43_rate_memory_write(dev, B43_CCK_RATE_11MB, 0); 2683 break; 2684 default: 2685 B43_WARN_ON(1); 2686 } 2687} 2688 2689/* Set the default values for the PHY TX Control Words. */ 2690static void b43_set_phytxctl_defaults(struct b43_wldev *dev) 2691{ 2692 u16 ctl = 0; 2693 2694 ctl |= B43_TXH_PHY_ENC_CCK; 2695 ctl |= B43_TXH_PHY_ANT01AUTO; 2696 ctl |= B43_TXH_PHY_TXPWR; 2697 2698 b43_shm_write16(dev, B43_SHM_SHARED, B43_SHM_SH_BEACPHYCTL, ctl); 2699 b43_shm_write16(dev, B43_SHM_SHARED, B43_SHM_SH_ACKCTSPHYCTL, ctl); 2700 b43_shm_write16(dev, B43_SHM_SHARED, B43_SHM_SH_PRPHYCTL, ctl); 2701} 2702 2703/* Set the TX-Antenna for management frames sent by firmware. */ 2704static void b43_mgmtframe_txantenna(struct b43_wldev *dev, int antenna) 2705{ 2706 u16 ant; 2707 u16 tmp; 2708 2709 ant = b43_antenna_to_phyctl(antenna); 2710 2711 /* For ACK/CTS */ 2712 tmp = b43_shm_read16(dev, B43_SHM_SHARED, B43_SHM_SH_ACKCTSPHYCTL); 2713 tmp = (tmp & ~B43_TXH_PHY_ANT) | ant; 2714 b43_shm_write16(dev, B43_SHM_SHARED, B43_SHM_SH_ACKCTSPHYCTL, tmp); 2715 /* For Probe Resposes */ 2716 tmp = b43_shm_read16(dev, B43_SHM_SHARED, B43_SHM_SH_PRPHYCTL); 2717 tmp = (tmp & ~B43_TXH_PHY_ANT) | ant; 2718 b43_shm_write16(dev, B43_SHM_SHARED, B43_SHM_SH_PRPHYCTL, tmp); 2719} 2720 2721/* This is the opposite of b43_chip_init() */ 2722static void b43_chip_exit(struct b43_wldev *dev) 2723{ 2724 b43_phy_exit(dev); 2725 b43_gpio_cleanup(dev); 2726 /* firmware is released later */ 2727} 2728 2729/* Initialize the chip 2730 * http://bcm-specs.sipsolutions.net/ChipInit 2731 */ 2732static int b43_chip_init(struct b43_wldev *dev) 2733{ 2734 struct b43_phy *phy = &dev->phy; 2735 int err; 2736 u32 value32, macctl; 2737 u16 value16; 2738 2739 /* Initialize the MAC control */ 2740 macctl = B43_MACCTL_IHR_ENABLED | B43_MACCTL_SHM_ENABLED; 2741 if (dev->phy.gmode) 2742 macctl |= B43_MACCTL_GMODE; 2743 macctl |= B43_MACCTL_INFRA; 2744 b43_write32(dev, B43_MMIO_MACCTL, macctl); 2745 2746 err = b43_request_firmware(dev); 2747 if (err) 2748 goto out; 2749 err = b43_upload_microcode(dev); 2750 if (err) 2751 goto out; /* firmware is released later */ 2752 2753 err = b43_gpio_init(dev); 2754 if (err) 2755 goto out; /* firmware is released later */ 2756 2757 err = b43_upload_initvals(dev); 2758 if (err) 2759 goto err_gpio_clean; 2760 2761 /* Turn the Analog on and initialize the PHY. */ 2762 phy->ops->switch_analog(dev, 1); 2763 err = b43_phy_init(dev); 2764 if (err) 2765 goto err_gpio_clean; 2766 2767 /* Disable Interference Mitigation. */ 2768 if (phy->ops->interf_mitigation) 2769 phy->ops->interf_mitigation(dev, B43_INTERFMODE_NONE); 2770 2771 /* Select the antennae */ 2772 if (phy->ops->set_rx_antenna) 2773 phy->ops->set_rx_antenna(dev, B43_ANTENNA_DEFAULT); 2774 b43_mgmtframe_txantenna(dev, B43_ANTENNA_DEFAULT); 2775 2776 if (phy->type == B43_PHYTYPE_B) { 2777 value16 = b43_read16(dev, 0x005E); 2778 value16 |= 0x0004; 2779 b43_write16(dev, 0x005E, value16); 2780 } 2781 b43_write32(dev, 0x0100, 0x01000000); 2782 if (dev->dev->id.revision < 5) 2783 b43_write32(dev, 0x010C, 0x01000000); 2784 2785 b43_write32(dev, B43_MMIO_MACCTL, b43_read32(dev, B43_MMIO_MACCTL) 2786 & ~B43_MACCTL_INFRA); 2787 b43_write32(dev, B43_MMIO_MACCTL, b43_read32(dev, B43_MMIO_MACCTL) 2788 | B43_MACCTL_INFRA); 2789 2790 /* Probe Response Timeout value */ 2791 /* FIXME: Default to 0, has to be set by ioctl probably... :-/ */ 2792 b43_shm_write16(dev, B43_SHM_SHARED, 0x0074, 0x0000); 2793 2794 /* Initially set the wireless operation mode. */ 2795 b43_adjust_opmode(dev); 2796 2797 if (dev->dev->id.revision < 3) { 2798 b43_write16(dev, 0x060E, 0x0000); 2799 b43_write16(dev, 0x0610, 0x8000); 2800 b43_write16(dev, 0x0604, 0x0000); 2801 b43_write16(dev, 0x0606, 0x0200); 2802 } else { 2803 b43_write32(dev, 0x0188, 0x80000000); 2804 b43_write32(dev, 0x018C, 0x02000000); 2805 } 2806 b43_write32(dev, B43_MMIO_GEN_IRQ_REASON, 0x00004000); 2807 b43_write32(dev, B43_MMIO_DMA0_IRQ_MASK, 0x0001DC00); 2808 b43_write32(dev, B43_MMIO_DMA1_IRQ_MASK, 0x0000DC00); 2809 b43_write32(dev, B43_MMIO_DMA2_IRQ_MASK, 0x0000DC00); 2810 b43_write32(dev, B43_MMIO_DMA3_IRQ_MASK, 0x0001DC00); 2811 b43_write32(dev, B43_MMIO_DMA4_IRQ_MASK, 0x0000DC00); 2812 b43_write32(dev, B43_MMIO_DMA5_IRQ_MASK, 0x0000DC00); 2813 2814 value32 = ssb_read32(dev->dev, SSB_TMSLOW); 2815 value32 |= 0x00100000; 2816 ssb_write32(dev->dev, SSB_TMSLOW, value32); 2817 2818 b43_write16(dev, B43_MMIO_POWERUP_DELAY, 2819 dev->dev->bus->chipco.fast_pwrup_delay); 2820 2821 err = 0; 2822 b43dbg(dev->wl, "Chip initialized\n"); 2823out: 2824 return err; 2825 2826err_gpio_clean: 2827 b43_gpio_cleanup(dev); 2828 return err; 2829} 2830 2831static void b43_periodic_every60sec(struct b43_wldev *dev) 2832{ 2833 const struct b43_phy_operations *ops = dev->phy.ops; 2834 2835 if (ops->pwork_60sec) 2836 ops->pwork_60sec(dev); 2837 2838 /* Force check the TX power emission now. */ 2839 b43_phy_txpower_check(dev, B43_TXPWR_IGNORE_TIME); 2840} 2841 2842static void b43_periodic_every30sec(struct b43_wldev *dev) 2843{ 2844 /* Update device statistics. */ 2845 b43_calculate_link_quality(dev); 2846} 2847 2848static void b43_periodic_every15sec(struct b43_wldev *dev) 2849{ 2850 struct b43_phy *phy = &dev->phy; 2851 u16 wdr; 2852 2853 if (dev->fw.opensource) { 2854 /* Check if the firmware is still alive. 2855 * It will reset the watchdog counter to 0 in its idle loop. */ 2856 wdr = b43_shm_read16(dev, B43_SHM_SCRATCH, B43_WATCHDOG_REG); 2857 if (unlikely(wdr)) { 2858 b43err(dev->wl, "Firmware watchdog: The firmware died!\n"); 2859 b43_controller_restart(dev, "Firmware watchdog"); 2860 return; 2861 } else { 2862 b43_shm_write16(dev, B43_SHM_SCRATCH, 2863 B43_WATCHDOG_REG, 1); 2864 } 2865 } 2866 2867 if (phy->ops->pwork_15sec) 2868 phy->ops->pwork_15sec(dev); 2869 2870 atomic_set(&phy->txerr_cnt, B43_PHY_TX_BADNESS_LIMIT); 2871 wmb(); 2872} 2873 2874static void do_periodic_work(struct b43_wldev *dev) 2875{ 2876 unsigned int state; 2877 2878 state = dev->periodic_state; 2879 if (state % 4 == 0) 2880 b43_periodic_every60sec(dev); 2881 if (state % 2 == 0) 2882 b43_periodic_every30sec(dev); 2883 b43_periodic_every15sec(dev); 2884} 2885 2886/* Periodic work locking policy: 2887 * The whole periodic work handler is protected by 2888 * wl->mutex. If another lock is needed somewhere in the 2889 * pwork callchain, it's aquired in-place, where it's needed. 2890 */ 2891static void b43_periodic_work_handler(struct work_struct *work) 2892{ 2893 struct b43_wldev *dev = container_of(work, struct b43_wldev, 2894 periodic_work.work); 2895 struct b43_wl *wl = dev->wl; 2896 unsigned long delay; 2897 2898 mutex_lock(&wl->mutex); 2899 2900 if (unlikely(b43_status(dev) != B43_STAT_STARTED)) 2901 goto out; 2902 if (b43_debug(dev, B43_DBG_PWORK_STOP)) 2903 goto out_requeue; 2904 2905 do_periodic_work(dev); 2906 2907 dev->periodic_state++; 2908out_requeue: 2909 if (b43_debug(dev, B43_DBG_PWORK_FAST)) 2910 delay = msecs_to_jiffies(50); 2911 else 2912 delay = round_jiffies_relative(HZ * 15); 2913 queue_delayed_work(wl->hw->workqueue, &dev->periodic_work, delay); 2914out: 2915 mutex_unlock(&wl->mutex); 2916} 2917 2918static void b43_periodic_tasks_setup(struct b43_wldev *dev) 2919{ 2920 struct delayed_work *work = &dev->periodic_work; 2921 2922 dev->periodic_state = 0; 2923 INIT_DELAYED_WORK(work, b43_periodic_work_handler); 2924 queue_delayed_work(dev->wl->hw->workqueue, work, 0); 2925} 2926 2927/* Check if communication with the device works correctly. */ 2928static int b43_validate_chipaccess(struct b43_wldev *dev) 2929{ 2930 u32 v, backup; 2931 2932 backup = b43_shm_read32(dev, B43_SHM_SHARED, 0); 2933 2934 /* Check for read/write and endianness problems. */ 2935 b43_shm_write32(dev, B43_SHM_SHARED, 0, 0x55AAAA55); 2936 if (b43_shm_read32(dev, B43_SHM_SHARED, 0) != 0x55AAAA55) 2937 goto error; 2938 b43_shm_write32(dev, B43_SHM_SHARED, 0, 0xAA5555AA); 2939 if (b43_shm_read32(dev, B43_SHM_SHARED, 0) != 0xAA5555AA) 2940 goto error; 2941 2942 b43_shm_write32(dev, B43_SHM_SHARED, 0, backup); 2943 2944 if ((dev->dev->id.revision >= 3) && (dev->dev->id.revision <= 10)) { 2945 /* The 32bit register shadows the two 16bit registers 2946 * with update sideeffects. Validate this. */ 2947 b43_write16(dev, B43_MMIO_TSF_CFP_START, 0xAAAA); 2948 b43_write32(dev, B43_MMIO_TSF_CFP_START, 0xCCCCBBBB); 2949 if (b43_read16(dev, B43_MMIO_TSF_CFP_START_LOW) != 0xBBBB) 2950 goto error; 2951 if (b43_read16(dev, B43_MMIO_TSF_CFP_START_HIGH) != 0xCCCC) 2952 goto error; 2953 } 2954 b43_write32(dev, B43_MMIO_TSF_CFP_START, 0); 2955 2956 v = b43_read32(dev, B43_MMIO_MACCTL); 2957 v |= B43_MACCTL_GMODE; 2958 if (v != (B43_MACCTL_GMODE | B43_MACCTL_IHR_ENABLED)) 2959 goto error; 2960 2961 return 0; 2962error: 2963 b43err(dev->wl, "Failed to validate the chipaccess\n"); 2964 return -ENODEV; 2965} 2966 2967static void b43_security_init(struct b43_wldev *dev) 2968{ 2969 dev->max_nr_keys = (dev->dev->id.revision >= 5) ? 58 : 20; 2970 B43_WARN_ON(dev->max_nr_keys > ARRAY_SIZE(dev->key)); 2971 dev->ktp = b43_shm_read16(dev, B43_SHM_SHARED, B43_SHM_SH_KTP); 2972 /* KTP is a word address, but we address SHM bytewise. 2973 * So multiply by two. 2974 */ 2975 dev->ktp *= 2; 2976 if (dev->dev->id.revision >= 5) { 2977 /* Number of RCMTA address slots */ 2978 b43_write16(dev, B43_MMIO_RCMTA_COUNT, dev->max_nr_keys - 8); 2979 } 2980 b43_clear_keys(dev); 2981} 2982 2983static int b43_rng_read(struct hwrng *rng, u32 *data) 2984{ 2985 struct b43_wl *wl = (struct b43_wl *)rng->priv; 2986 unsigned long flags; 2987 2988 /* Don't take wl->mutex here, as it could deadlock with 2989 * hwrng internal locking. It's not needed to take 2990 * wl->mutex here, anyway. */ 2991 2992 spin_lock_irqsave(&wl->irq_lock, flags); 2993 *data = b43_read16(wl->current_dev, B43_MMIO_RNG); 2994 spin_unlock_irqrestore(&wl->irq_lock, flags); 2995 2996 return (sizeof(u16)); 2997} 2998 2999static void b43_rng_exit(struct b43_wl *wl) 3000{ 3001 if (wl->rng_initialized) 3002 hwrng_unregister(&wl->rng); 3003} 3004 3005static int b43_rng_init(struct b43_wl *wl) 3006{ 3007 int err; 3008 3009 snprintf(wl->rng_name, ARRAY_SIZE(wl->rng_name), 3010 "%s_%s", KBUILD_MODNAME, wiphy_name(wl->hw->wiphy)); 3011 wl->rng.name = wl->rng_name; 3012 wl->rng.data_read = b43_rng_read; 3013 wl->rng.priv = (unsigned long)wl; 3014 wl->rng_initialized = 1; 3015 err = hwrng_register(&wl->rng); 3016 if (err) { 3017 wl->rng_initialized = 0; 3018 b43err(wl, "Failed to register the random " 3019 "number generator (%d)\n", err); 3020 } 3021 3022 return err; 3023} 3024 3025static int b43_op_tx(struct ieee80211_hw *hw, 3026 struct sk_buff *skb) 3027{ 3028 struct b43_wl *wl = hw_to_b43_wl(hw); 3029 struct b43_wldev *dev = wl->current_dev; 3030 unsigned long flags; 3031 int err; 3032 3033 if (unlikely(skb->len < 2 + 2 + 6)) { 3034 /* Too short, this can't be a valid frame. */ 3035 goto drop_packet; 3036 } 3037 B43_WARN_ON(skb_shinfo(skb)->nr_frags); 3038 if (unlikely(!dev)) 3039 goto drop_packet; 3040 3041 /* Transmissions on seperate queues can run concurrently. */ 3042 read_lock_irqsave(&wl->tx_lock, flags); 3043 3044 err = -ENODEV; 3045 if (likely(b43_status(dev) >= B43_STAT_STARTED)) { 3046 if (b43_using_pio_transfers(dev)) 3047 err = b43_pio_tx(dev, skb); 3048 else 3049 err = b43_dma_tx(dev, skb); 3050 } 3051 3052 read_unlock_irqrestore(&wl->tx_lock, flags); 3053 3054 if (unlikely(err)) 3055 goto drop_packet; 3056 return NETDEV_TX_OK; 3057 3058drop_packet: 3059 /* We can not transmit this packet. Drop it. */ 3060 dev_kfree_skb_any(skb); 3061 return NETDEV_TX_OK; 3062} 3063 3064/* Locking: wl->irq_lock */ 3065static void b43_qos_params_upload(struct b43_wldev *dev, 3066 const struct ieee80211_tx_queue_params *p, 3067 u16 shm_offset) 3068{ 3069 u16 params[B43_NR_QOSPARAMS]; 3070 int bslots, tmp; 3071 unsigned int i; 3072 3073 bslots = b43_read16(dev, B43_MMIO_RNG) & p->cw_min; 3074 3075 memset(¶ms, 0, sizeof(params)); 3076 3077 params[B43_QOSPARAM_TXOP] = p->txop * 32; 3078 params[B43_QOSPARAM_CWMIN] = p->cw_min; 3079 params[B43_QOSPARAM_CWMAX] = p->cw_max; 3080 params[B43_QOSPARAM_CWCUR] = p->cw_min; 3081 params[B43_QOSPARAM_AIFS] = p->aifs; 3082 params[B43_QOSPARAM_BSLOTS] = bslots; 3083 params[B43_QOSPARAM_REGGAP] = bslots + p->aifs; 3084 3085 for (i = 0; i < ARRAY_SIZE(params); i++) { 3086 if (i == B43_QOSPARAM_STATUS) { 3087 tmp = b43_shm_read16(dev, B43_SHM_SHARED, 3088 shm_offset + (i * 2)); 3089 /* Mark the parameters as updated. */ 3090 tmp |= 0x100; 3091 b43_shm_write16(dev, B43_SHM_SHARED, 3092 shm_offset + (i * 2), 3093 tmp); 3094 } else { 3095 b43_shm_write16(dev, B43_SHM_SHARED, 3096 shm_offset + (i * 2), 3097 params[i]); 3098 } 3099 } 3100} 3101 3102/* Mapping of mac80211 queue numbers to b43 QoS SHM offsets. */ 3103static const u16 b43_qos_shm_offsets[] = { 3104 /* [mac80211-queue-nr] = SHM_OFFSET, */ 3105 [0] = B43_QOS_VOICE, 3106 [1] = B43_QOS_VIDEO, 3107 [2] = B43_QOS_BESTEFFORT, 3108 [3] = B43_QOS_BACKGROUND, 3109}; 3110 3111/* Update all QOS parameters in hardware. */ 3112static void b43_qos_upload_all(struct b43_wldev *dev) 3113{ 3114 struct b43_wl *wl = dev->wl; 3115 struct b43_qos_params *params; 3116 unsigned int i; 3117 3118 BUILD_BUG_ON(ARRAY_SIZE(b43_qos_shm_offsets) != 3119 ARRAY_SIZE(wl->qos_params)); 3120 3121 b43_mac_suspend(dev); 3122 for (i = 0; i < ARRAY_SIZE(wl->qos_params); i++) { 3123 params = &(wl->qos_params[i]); 3124 b43_qos_params_upload(dev, &(params->p), 3125 b43_qos_shm_offsets[i]); 3126 } 3127 b43_mac_enable(dev); 3128} 3129 3130static void b43_qos_clear(struct b43_wl *wl) 3131{ 3132 struct b43_qos_params *params; 3133 unsigned int i; 3134 3135 /* Initialize QoS parameters to sane defaults. */ 3136 3137 BUILD_BUG_ON(ARRAY_SIZE(b43_qos_shm_offsets) != 3138 ARRAY_SIZE(wl->qos_params)); 3139 3140 for (i = 0; i < ARRAY_SIZE(wl->qos_params); i++) { 3141 params = &(wl->qos_params[i]); 3142 3143 switch (b43_qos_shm_offsets[i]) { 3144 case B43_QOS_VOICE: 3145 params->p.txop = 0; 3146 params->p.aifs = 2; 3147 params->p.cw_min = 0x0001; 3148 params->p.cw_max = 0x0001; 3149 break; 3150 case B43_QOS_VIDEO: 3151 params->p.txop = 0; 3152 params->p.aifs = 2; 3153 params->p.cw_min = 0x0001; 3154 params->p.cw_max = 0x0001; 3155 break; 3156 case B43_QOS_BESTEFFORT: 3157 params->p.txop = 0; 3158 params->p.aifs = 3; 3159 params->p.cw_min = 0x0001; 3160 params->p.cw_max = 0x03FF; 3161 break; 3162 case B43_QOS_BACKGROUND: 3163 params->p.txop = 0; 3164 params->p.aifs = 7; 3165 params->p.cw_min = 0x0001; 3166 params->p.cw_max = 0x03FF; 3167 break; 3168 default: 3169 B43_WARN_ON(1); 3170 } 3171 } 3172} 3173 3174/* Initialize the core's QOS capabilities */ 3175static void b43_qos_init(struct b43_wldev *dev) 3176{ 3177 /* Upload the current QOS parameters. */ 3178 b43_qos_upload_all(dev); 3179 3180 /* Enable QOS support. */ 3181 b43_hf_write(dev, b43_hf_read(dev) | B43_HF_EDCF); 3182 b43_write16(dev, B43_MMIO_IFSCTL, 3183 b43_read16(dev, B43_MMIO_IFSCTL) 3184 | B43_MMIO_IFSCTL_USE_EDCF); 3185} 3186 3187static int b43_op_conf_tx(struct ieee80211_hw *hw, u16 _queue, 3188 const struct ieee80211_tx_queue_params *params) 3189{ 3190 struct b43_wl *wl = hw_to_b43_wl(hw); 3191 struct b43_wldev *dev; 3192 unsigned int queue = (unsigned int)_queue; 3193 int err = -ENODEV; 3194 3195 if (queue >= ARRAY_SIZE(wl->qos_params)) { 3196 /* Queue not available or don't support setting 3197 * params on this queue. Return success to not 3198 * confuse mac80211. */ 3199 return 0; 3200 } 3201 BUILD_BUG_ON(ARRAY_SIZE(b43_qos_shm_offsets) != 3202 ARRAY_SIZE(wl->qos_params)); 3203 3204 mutex_lock(&wl->mutex); 3205 dev = wl->current_dev; 3206 if (unlikely(!dev || (b43_status(dev) < B43_STAT_INITIALIZED))) 3207 goto out_unlock; 3208 3209 memcpy(&(wl->qos_params[queue].p), params, sizeof(*params)); 3210 b43_mac_suspend(dev); 3211 b43_qos_params_upload(dev, &(wl->qos_params[queue].p), 3212 b43_qos_shm_offsets[queue]); 3213 b43_mac_enable(dev); 3214 err = 0; 3215 3216out_unlock: 3217 mutex_unlock(&wl->mutex); 3218 3219 return err; 3220} 3221 3222static int b43_op_get_tx_stats(struct ieee80211_hw *hw, 3223 struct ieee80211_tx_queue_stats *stats) 3224{ 3225 struct b43_wl *wl = hw_to_b43_wl(hw); 3226 struct b43_wldev *dev = wl->current_dev; 3227 unsigned long flags; 3228 int err = -ENODEV; 3229 3230 if (!dev) 3231 goto out; 3232 spin_lock_irqsave(&wl->irq_lock, flags); 3233 if (likely(b43_status(dev) >= B43_STAT_STARTED)) { 3234 if (b43_using_pio_transfers(dev)) 3235 b43_pio_get_tx_stats(dev, stats); 3236 else 3237 b43_dma_get_tx_stats(dev, stats); 3238 err = 0; 3239 } 3240 spin_unlock_irqrestore(&wl->irq_lock, flags); 3241out: 3242 return err; 3243} 3244 3245static int b43_op_get_stats(struct ieee80211_hw *hw, 3246 struct ieee80211_low_level_stats *stats) 3247{ 3248 struct b43_wl *wl = hw_to_b43_wl(hw); 3249 unsigned long flags; 3250 3251 spin_lock_irqsave(&wl->irq_lock, flags); 3252 memcpy(stats, &wl->ieee_stats, sizeof(*stats)); 3253 spin_unlock_irqrestore(&wl->irq_lock, flags); 3254 3255 return 0; 3256} 3257 3258static u64 b43_op_get_tsf(struct ieee80211_hw *hw) 3259{ 3260 struct b43_wl *wl = hw_to_b43_wl(hw); 3261 struct b43_wldev *dev; 3262 u64 tsf; 3263 3264 mutex_lock(&wl->mutex); 3265 spin_lock_irq(&wl->irq_lock); 3266 dev = wl->current_dev; 3267 3268 if (dev && (b43_status(dev) >= B43_STAT_INITIALIZED)) 3269 b43_tsf_read(dev, &tsf); 3270 else 3271 tsf = 0; 3272 3273 spin_unlock_irq(&wl->irq_lock); 3274 mutex_unlock(&wl->mutex); 3275 3276 return tsf; 3277} 3278 3279static void b43_op_set_tsf(struct ieee80211_hw *hw, u64 tsf) 3280{ 3281 struct b43_wl *wl = hw_to_b43_wl(hw); 3282 struct b43_wldev *dev; 3283 3284 mutex_lock(&wl->mutex); 3285 spin_lock_irq(&wl->irq_lock); 3286 dev = wl->current_dev; 3287 3288 if (dev && (b43_status(dev) >= B43_STAT_INITIALIZED)) 3289 b43_tsf_write(dev, tsf); 3290 3291 spin_unlock_irq(&wl->irq_lock); 3292 mutex_unlock(&wl->mutex); 3293} 3294 3295static void b43_put_phy_into_reset(struct b43_wldev *dev) 3296{ 3297 struct ssb_device *sdev = dev->dev; 3298 u32 tmslow; 3299 3300 tmslow = ssb_read32(sdev, SSB_TMSLOW); 3301 tmslow &= ~B43_TMSLOW_GMODE; 3302 tmslow |= B43_TMSLOW_PHYRESET; 3303 tmslow |= SSB_TMSLOW_FGC; 3304 ssb_write32(sdev, SSB_TMSLOW, tmslow); 3305 msleep(1); 3306 3307 tmslow = ssb_read32(sdev, SSB_TMSLOW); 3308 tmslow &= ~SSB_TMSLOW_FGC; 3309 tmslow |= B43_TMSLOW_PHYRESET; 3310 ssb_write32(sdev, SSB_TMSLOW, tmslow); 3311 msleep(1); 3312} 3313 3314static const char *band_to_string(enum ieee80211_band band) 3315{ 3316 switch (band) { 3317 case IEEE80211_BAND_5GHZ: 3318 return "5"; 3319 case IEEE80211_BAND_2GHZ: 3320 return "2.4"; 3321 default: 3322 break; 3323 } 3324 B43_WARN_ON(1); 3325 return ""; 3326} 3327 3328/* Expects wl->mutex locked */ 3329static int b43_switch_band(struct b43_wl *wl, struct ieee80211_channel *chan) 3330{ 3331 struct b43_wldev *up_dev = NULL; 3332 struct b43_wldev *down_dev; 3333 struct b43_wldev *d; 3334 int err; 3335 bool uninitialized_var(gmode); 3336 int prev_status; 3337 3338 /* Find a device and PHY which supports the band. */ 3339 list_for_each_entry(d, &wl->devlist, list) { 3340 switch (chan->band) { 3341 case IEEE80211_BAND_5GHZ: 3342 if (d->phy.supports_5ghz) { 3343 up_dev = d; 3344 gmode = 0; 3345 } 3346 break; 3347 case IEEE80211_BAND_2GHZ: 3348 if (d->phy.supports_2ghz) { 3349 up_dev = d; 3350 gmode = 1; 3351 } 3352 break; 3353 default: 3354 B43_WARN_ON(1); 3355 return -EINVAL; 3356 } 3357 if (up_dev) 3358 break; 3359 } 3360 if (!up_dev) { 3361 b43err(wl, "Could not find a device for %s-GHz band operation\n", 3362 band_to_string(chan->band)); 3363 return -ENODEV; 3364 } 3365 if ((up_dev == wl->current_dev) && 3366 (!!wl->current_dev->phy.gmode == !!gmode)) { 3367 /* This device is already running. */ 3368 return 0; 3369 } 3370 b43dbg(wl, "Switching to %s-GHz band\n", 3371 band_to_string(chan->band)); 3372 down_dev = wl->current_dev; 3373 3374 prev_status = b43_status(down_dev); 3375 /* Shutdown the currently running core. */ 3376 if (prev_status >= B43_STAT_STARTED) 3377 b43_wireless_core_stop(down_dev); 3378 if (prev_status >= B43_STAT_INITIALIZED) 3379 b43_wireless_core_exit(down_dev); 3380 3381 if (down_dev != up_dev) { 3382 /* We switch to a different core, so we put PHY into 3383 * RESET on the old core. */ 3384 b43_put_phy_into_reset(down_dev); 3385 } 3386 3387 /* Now start the new core. */ 3388 up_dev->phy.gmode = gmode; 3389 if (prev_status >= B43_STAT_INITIALIZED) { 3390 err = b43_wireless_core_init(up_dev); 3391 if (err) { 3392 b43err(wl, "Fatal: Could not initialize device for " 3393 "selected %s-GHz band\n", 3394 band_to_string(chan->band)); 3395 goto init_failure; 3396 } 3397 } 3398 if (prev_status >= B43_STAT_STARTED) { 3399 err = b43_wireless_core_start(up_dev); 3400 if (err) { 3401 b43err(wl, "Fatal: Coult not start device for " 3402 "selected %s-GHz band\n", 3403 band_to_string(chan->band)); 3404 b43_wireless_core_exit(up_dev); 3405 goto init_failure; 3406 } 3407 } 3408 B43_WARN_ON(b43_status(up_dev) != prev_status); 3409 3410 wl->current_dev = up_dev; 3411 3412 return 0; 3413init_failure: 3414 /* Whoops, failed to init the new core. No core is operating now. */ 3415 wl->current_dev = NULL; 3416 return err; 3417} 3418 3419/* Write the short and long frame retry limit values. */ 3420static void b43_set_retry_limits(struct b43_wldev *dev, 3421 unsigned int short_retry, 3422 unsigned int long_retry) 3423{ 3424 /* The retry limit is a 4-bit counter. Enforce this to avoid overflowing 3425 * the chip-internal counter. */ 3426 short_retry = min(short_retry, (unsigned int)0xF); 3427 long_retry = min(long_retry, (unsigned int)0xF); 3428 3429 b43_shm_write16(dev, B43_SHM_SCRATCH, B43_SHM_SC_SRLIMIT, 3430 short_retry); 3431 b43_shm_write16(dev, B43_SHM_SCRATCH, B43_SHM_SC_LRLIMIT, 3432 long_retry); 3433} 3434 3435static int b43_op_config(struct ieee80211_hw *hw, u32 changed) 3436{ 3437 struct b43_wl *wl = hw_to_b43_wl(hw); 3438 struct b43_wldev *dev; 3439 struct b43_phy *phy; 3440 struct ieee80211_conf *conf = &hw->conf; 3441 unsigned long flags; 3442 int antenna; 3443 int err = 0; 3444 3445 mutex_lock(&wl->mutex); 3446 3447 /* Switch the band (if necessary). This might change the active core. */ 3448 err = b43_switch_band(wl, conf->channel); 3449 if (err) 3450 goto out_unlock_mutex; 3451 dev = wl->current_dev; 3452 phy = &dev->phy; 3453 3454 b43_mac_suspend(dev); 3455 3456 if (changed & IEEE80211_CONF_CHANGE_RETRY_LIMITS) 3457 b43_set_retry_limits(dev, conf->short_frame_max_tx_count, 3458 conf->long_frame_max_tx_count); 3459 changed &= ~IEEE80211_CONF_CHANGE_RETRY_LIMITS; 3460 if (!changed) 3461 goto out_mac_enable; 3462 3463 /* Switch to the requested channel. 3464 * The firmware takes care of races with the TX handler. */ 3465 if (conf->channel->hw_value != phy->channel) 3466 b43_switch_channel(dev, conf->channel->hw_value); 3467 3468 dev->wl->radiotap_enabled = !!(conf->flags & IEEE80211_CONF_RADIOTAP); 3469 3470 /* Adjust the desired TX power level. */ 3471 if (conf->power_level != 0) { 3472 spin_lock_irqsave(&wl->irq_lock, flags); 3473 if (conf->power_level != phy->desired_txpower) { 3474 phy->desired_txpower = conf->power_level; 3475 b43_phy_txpower_check(dev, B43_TXPWR_IGNORE_TIME | 3476 B43_TXPWR_IGNORE_TSSI); 3477 } 3478 spin_unlock_irqrestore(&wl->irq_lock, flags); 3479 } 3480 3481 /* Antennas for RX and management frame TX. */ 3482 antenna = B43_ANTENNA_DEFAULT; 3483 b43_mgmtframe_txantenna(dev, antenna); 3484 antenna = B43_ANTENNA_DEFAULT; 3485 if (phy->ops->set_rx_antenna) 3486 phy->ops->set_rx_antenna(dev, antenna); 3487 3488 /* Update templates for AP/mesh mode. */ 3489 if (b43_is_mode(wl, NL80211_IFTYPE_AP) || 3490 b43_is_mode(wl, NL80211_IFTYPE_MESH_POINT)) 3491 b43_set_beacon_int(dev, conf->beacon_int); 3492 3493 if (!!conf->radio_enabled != phy->radio_on) { 3494 if (conf->radio_enabled) { 3495 b43_software_rfkill(dev, RFKILL_STATE_UNBLOCKED); 3496 b43info(dev->wl, "Radio turned on by software\n"); 3497 if (!dev->radio_hw_enable) { 3498 b43info(dev->wl, "The hardware RF-kill button " 3499 "still turns the radio physically off. " 3500 "Press the button to turn it on.\n"); 3501 } 3502 } else { 3503 b43_software_rfkill(dev, RFKILL_STATE_SOFT_BLOCKED); 3504 b43info(dev->wl, "Radio turned off by software\n"); 3505 } 3506 } 3507 3508out_mac_enable: 3509 b43_mac_enable(dev); 3510out_unlock_mutex: 3511 mutex_unlock(&wl->mutex); 3512 3513 return err; 3514} 3515 3516static void b43_update_basic_rates(struct b43_wldev *dev, u32 brates) 3517{ 3518 struct ieee80211_supported_band *sband = 3519 dev->wl->hw->wiphy->bands[b43_current_band(dev->wl)]; 3520 struct ieee80211_rate *rate; 3521 int i; 3522 u16 basic, direct, offset, basic_offset, rateptr; 3523 3524 for (i = 0; i < sband->n_bitrates; i++) { 3525 rate = &sband->bitrates[i]; 3526 3527 if (b43_is_cck_rate(rate->hw_value)) { 3528 direct = B43_SHM_SH_CCKDIRECT; 3529 basic = B43_SHM_SH_CCKBASIC; 3530 offset = b43_plcp_get_ratecode_cck(rate->hw_value); 3531 offset &= 0xF; 3532 } else { 3533 direct = B43_SHM_SH_OFDMDIRECT; 3534 basic = B43_SHM_SH_OFDMBASIC; 3535 offset = b43_plcp_get_ratecode_ofdm(rate->hw_value); 3536 offset &= 0xF; 3537 } 3538 3539 rate = ieee80211_get_response_rate(sband, brates, rate->bitrate); 3540 3541 if (b43_is_cck_rate(rate->hw_value)) { 3542 basic_offset = b43_plcp_get_ratecode_cck(rate->hw_value); 3543 basic_offset &= 0xF; 3544 } else { 3545 basic_offset = b43_plcp_get_ratecode_ofdm(rate->hw_value); 3546 basic_offset &= 0xF; 3547 } 3548 3549 /* 3550 * Get the pointer that we need to point to 3551 * from the direct map 3552 */ 3553 rateptr = b43_shm_read16(dev, B43_SHM_SHARED, 3554 direct + 2 * basic_offset); 3555 /* and write it to the basic map */ 3556 b43_shm_write16(dev, B43_SHM_SHARED, basic + 2 * offset, 3557 rateptr); 3558 } 3559} 3560 3561static void b43_op_bss_info_changed(struct ieee80211_hw *hw, 3562 struct ieee80211_vif *vif, 3563 struct ieee80211_bss_conf *conf, 3564 u32 changed) 3565{ 3566 struct b43_wl *wl = hw_to_b43_wl(hw); 3567 struct b43_wldev *dev; 3568 3569 mutex_lock(&wl->mutex); 3570 3571 dev = wl->current_dev; 3572 if (!dev || b43_status(dev) < B43_STAT_STARTED) 3573 goto out_unlock_mutex; 3574 b43_mac_suspend(dev); 3575 3576 if (changed & BSS_CHANGED_BASIC_RATES) 3577 b43_update_basic_rates(dev, conf->basic_rates); 3578 3579 if (changed & BSS_CHANGED_ERP_SLOT) { 3580 if (conf->use_short_slot) 3581 b43_short_slot_timing_enable(dev); 3582 else 3583 b43_short_slot_timing_disable(dev); 3584 } 3585 3586 b43_mac_enable(dev); 3587out_unlock_mutex: 3588 mutex_unlock(&wl->mutex); 3589 3590 return; 3591} 3592 3593static int b43_op_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd, 3594 struct ieee80211_vif *vif, struct ieee80211_sta *sta, 3595 struct ieee80211_key_conf *key) 3596{ 3597 struct b43_wl *wl = hw_to_b43_wl(hw); 3598 struct b43_wldev *dev; 3599 u8 algorithm; 3600 u8 index; 3601 int err; 3602 static const u8 bcast_addr[ETH_ALEN] = { 0xff, 0xff, 0xff, 0xff, 0xff, 0xff }; 3603 3604 if (modparam_nohwcrypt) 3605 return -ENOSPC; /* User disabled HW-crypto */ 3606 3607 mutex_lock(&wl->mutex); 3608 spin_lock_irq(&wl->irq_lock); 3609 write_lock(&wl->tx_lock); 3610 /* Why do we need all this locking here? 3611 * mutex -> Every config operation must take it. 3612 * irq_lock -> We modify the dev->key array, which is accessed 3613 * in the IRQ handlers. 3614 * tx_lock -> We modify the dev->key array, which is accessed 3615 * in the TX handler. 3616 */ 3617 3618 dev = wl->current_dev; 3619 err = -ENODEV; 3620 if (!dev || b43_status(dev) < B43_STAT_INITIALIZED) 3621 goto out_unlock; 3622 3623 if (dev->fw.pcm_request_failed) { 3624 /* We don't have firmware for the crypto engine. 3625 * Must use software-crypto. */ 3626 err = -EOPNOTSUPP; 3627 goto out_unlock; 3628 } 3629 3630 err = -EINVAL; 3631 switch (key->alg) { 3632 case ALG_WEP: 3633 if (key->keylen == LEN_WEP40) 3634 algorithm = B43_SEC_ALGO_WEP40; 3635 else 3636 algorithm = B43_SEC_ALGO_WEP104; 3637 break; 3638 case ALG_TKIP: 3639 algorithm = B43_SEC_ALGO_TKIP; 3640 break; 3641 case ALG_CCMP: 3642 algorithm = B43_SEC_ALGO_AES; 3643 break; 3644 default: 3645 B43_WARN_ON(1); 3646 goto out_unlock; 3647 } 3648 index = (u8) (key->keyidx); 3649 if (index > 3) 3650 goto out_unlock; 3651 3652 switch (cmd) { 3653 case SET_KEY: 3654 if (algorithm == B43_SEC_ALGO_TKIP) { 3655 /* FIXME: No TKIP hardware encryption for now. */ 3656 err = -EOPNOTSUPP; 3657 goto out_unlock; 3658 } 3659 3660 if (key->flags & IEEE80211_KEY_FLAG_PAIRWISE) { 3661 if (WARN_ON(!sta)) { 3662 err = -EOPNOTSUPP; 3663 goto out_unlock; 3664 } 3665 /* Pairwise key with an assigned MAC address. */ 3666 err = b43_key_write(dev, -1, algorithm, 3667 key->key, key->keylen, 3668 sta->addr, key); 3669 } else { 3670 /* Group key */ 3671 err = b43_key_write(dev, index, algorithm, 3672 key->key, key->keylen, NULL, key); 3673 } 3674 if (err) 3675 goto out_unlock; 3676 3677 if (algorithm == B43_SEC_ALGO_WEP40 || 3678 algorithm == B43_SEC_ALGO_WEP104) { 3679 b43_hf_write(dev, b43_hf_read(dev) | B43_HF_USEDEFKEYS); 3680 } else { 3681 b43_hf_write(dev, 3682 b43_hf_read(dev) & ~B43_HF_USEDEFKEYS); 3683 } 3684 key->flags |= IEEE80211_KEY_FLAG_GENERATE_IV; 3685 break; 3686 case DISABLE_KEY: { 3687 err = b43_key_clear(dev, key->hw_key_idx); 3688 if (err) 3689 goto out_unlock; 3690 break; 3691 } 3692 default: 3693 B43_WARN_ON(1); 3694 } 3695 3696out_unlock: 3697 if (!err) { 3698 b43dbg(wl, "%s hardware based encryption for keyidx: %d, " 3699 "mac: %pM\n", 3700 cmd == SET_KEY ? "Using" : "Disabling", key->keyidx, 3701 sta ? sta->addr : bcast_addr); 3702 b43_dump_keymemory(dev); 3703 } 3704 write_unlock(&wl->tx_lock); 3705 spin_unlock_irq(&wl->irq_lock); 3706 mutex_unlock(&wl->mutex); 3707 3708 return err; 3709} 3710 3711static void b43_op_configure_filter(struct ieee80211_hw *hw, 3712 unsigned int changed, unsigned int *fflags, 3713 int mc_count, struct dev_addr_list *mc_list) 3714{ 3715 struct b43_wl *wl = hw_to_b43_wl(hw); 3716 struct b43_wldev *dev = wl->current_dev; 3717 unsigned long flags; 3718 3719 if (!dev) { 3720 *fflags = 0; 3721 return; 3722 } 3723 3724 spin_lock_irqsave(&wl->irq_lock, flags); 3725 *fflags &= FIF_PROMISC_IN_BSS | 3726 FIF_ALLMULTI | 3727 FIF_FCSFAIL | 3728 FIF_PLCPFAIL | 3729 FIF_CONTROL | 3730 FIF_OTHER_BSS | 3731 FIF_BCN_PRBRESP_PROMISC; 3732 3733 changed &= FIF_PROMISC_IN_BSS | 3734 FIF_ALLMULTI | 3735 FIF_FCSFAIL | 3736 FIF_PLCPFAIL | 3737 FIF_CONTROL | 3738 FIF_OTHER_BSS | 3739 FIF_BCN_PRBRESP_PROMISC; 3740 3741 wl->filter_flags = *fflags; 3742 3743 if (changed && b43_status(dev) >= B43_STAT_INITIALIZED) 3744 b43_adjust_opmode(dev); 3745 spin_unlock_irqrestore(&wl->irq_lock, flags); 3746} 3747 3748static int b43_op_config_interface(struct ieee80211_hw *hw, 3749 struct ieee80211_vif *vif, 3750 struct ieee80211_if_conf *conf) 3751{ 3752 struct b43_wl *wl = hw_to_b43_wl(hw); 3753 struct b43_wldev *dev = wl->current_dev; 3754 unsigned long flags; 3755 3756 if (!dev) 3757 return -ENODEV; 3758 mutex_lock(&wl->mutex); 3759 spin_lock_irqsave(&wl->irq_lock, flags); 3760 B43_WARN_ON(wl->vif != vif); 3761 if (conf->bssid) 3762 memcpy(wl->bssid, conf->bssid, ETH_ALEN); 3763 else 3764 memset(wl->bssid, 0, ETH_ALEN); 3765 if (b43_status(dev) >= B43_STAT_INITIALIZED) { 3766 if (b43_is_mode(wl, NL80211_IFTYPE_AP) || 3767 b43_is_mode(wl, NL80211_IFTYPE_MESH_POINT)) { 3768 B43_WARN_ON(vif->type != wl->if_type); 3769 if (conf->changed & IEEE80211_IFCC_BEACON) 3770 b43_update_templates(wl); 3771 } else if (b43_is_mode(wl, NL80211_IFTYPE_ADHOC)) { 3772 if (conf->changed & IEEE80211_IFCC_BEACON) 3773 b43_update_templates(wl); 3774 } 3775 b43_write_mac_bssid_templates(dev); 3776 } 3777 spin_unlock_irqrestore(&wl->irq_lock, flags); 3778 mutex_unlock(&wl->mutex); 3779 3780 return 0; 3781} 3782 3783/* Locking: wl->mutex */ 3784static void b43_wireless_core_stop(struct b43_wldev *dev) 3785{ 3786 struct b43_wl *wl = dev->wl; 3787 unsigned long flags; 3788 3789 if (b43_status(dev) < B43_STAT_STARTED) 3790 return; 3791 3792 /* Disable and sync interrupts. We must do this before than 3793 * setting the status to INITIALIZED, as the interrupt handler 3794 * won't care about IRQs then. */ 3795 spin_lock_irqsave(&wl->irq_lock, flags); 3796 dev->irq_savedstate = b43_interrupt_disable(dev, B43_IRQ_ALL); 3797 b43_read32(dev, B43_MMIO_GEN_IRQ_MASK); /* flush */ 3798 spin_unlock_irqrestore(&wl->irq_lock, flags); 3799 b43_synchronize_irq(dev); 3800 3801 write_lock_irqsave(&wl->tx_lock, flags); 3802 b43_set_status(dev, B43_STAT_INITIALIZED); 3803 write_unlock_irqrestore(&wl->tx_lock, flags); 3804 3805 b43_pio_stop(dev); 3806 mutex_unlock(&wl->mutex); 3807 /* Must unlock as it would otherwise deadlock. No races here. 3808 * Cancel the possibly running self-rearming periodic work. */ 3809 cancel_delayed_work_sync(&dev->periodic_work); 3810 mutex_lock(&wl->mutex); 3811 3812 b43_mac_suspend(dev); 3813 free_irq(dev->dev->irq, dev); 3814 b43dbg(wl, "Wireless interface stopped\n"); 3815} 3816 3817/* Locking: wl->mutex */ 3818static int b43_wireless_core_start(struct b43_wldev *dev) 3819{ 3820 int err; 3821 3822 B43_WARN_ON(b43_status(dev) != B43_STAT_INITIALIZED); 3823 3824 drain_txstatus_queue(dev); 3825 err = request_irq(dev->dev->irq, b43_interrupt_handler, 3826 IRQF_SHARED, KBUILD_MODNAME, dev); 3827 if (err) { 3828 b43err(dev->wl, "Cannot request IRQ-%d\n", dev->dev->irq); 3829 goto out; 3830 } 3831 3832 /* We are ready to run. */ 3833 b43_set_status(dev, B43_STAT_STARTED); 3834 3835 /* Start data flow (TX/RX). */ 3836 b43_mac_enable(dev); 3837 b43_interrupt_enable(dev, dev->irq_savedstate); 3838 3839 /* Start maintainance work */ 3840 b43_periodic_tasks_setup(dev); 3841 3842 b43dbg(dev->wl, "Wireless interface started\n"); 3843 out: 3844 return err; 3845} 3846 3847/* Get PHY and RADIO versioning numbers */ 3848static int b43_phy_versioning(struct b43_wldev *dev) 3849{ 3850 struct b43_phy *phy = &dev->phy; 3851 u32 tmp; 3852 u8 analog_type; 3853 u8 phy_type; 3854 u8 phy_rev; 3855 u16 radio_manuf; 3856 u16 radio_ver; 3857 u16 radio_rev; 3858 int unsupported = 0; 3859 3860 /* Get PHY versioning */ 3861 tmp = b43_read16(dev, B43_MMIO_PHY_VER); 3862 analog_type = (tmp & B43_PHYVER_ANALOG) >> B43_PHYVER_ANALOG_SHIFT; 3863 phy_type = (tmp & B43_PHYVER_TYPE) >> B43_PHYVER_TYPE_SHIFT; 3864 phy_rev = (tmp & B43_PHYVER_VERSION); 3865 switch (phy_type) { 3866 case B43_PHYTYPE_A: 3867 if (phy_rev >= 4) 3868 unsupported = 1; 3869 break; 3870 case B43_PHYTYPE_B: 3871 if (phy_rev != 2 && phy_rev != 4 && phy_rev != 6 3872 && phy_rev != 7) 3873 unsupported = 1; 3874 break; 3875 case B43_PHYTYPE_G: 3876 if (phy_rev > 9) 3877 unsupported = 1; 3878 break; 3879#ifdef CONFIG_B43_NPHY 3880 case B43_PHYTYPE_N: 3881 if (phy_rev > 4) 3882 unsupported = 1; 3883 break; 3884#endif 3885#ifdef CONFIG_B43_PHY_LP 3886 case B43_PHYTYPE_LP: 3887 if (phy_rev > 1) 3888 unsupported = 1; 3889 break; 3890#endif 3891 default: 3892 unsupported = 1; 3893 }; 3894 if (unsupported) { 3895 b43err(dev->wl, "FOUND UNSUPPORTED PHY " 3896 "(Analog %u, Type %u, Revision %u)\n", 3897 analog_type, phy_type, phy_rev); 3898 return -EOPNOTSUPP; 3899 } 3900 b43dbg(dev->wl, "Found PHY: Analog %u, Type %u, Revision %u\n", 3901 analog_type, phy_type, phy_rev); 3902 3903 /* Get RADIO versioning */ 3904 if (dev->dev->bus->chip_id == 0x4317) { 3905 if (dev->dev->bus->chip_rev == 0) 3906 tmp = 0x3205017F; 3907 else if (dev->dev->bus->chip_rev == 1) 3908 tmp = 0x4205017F; 3909 else 3910 tmp = 0x5205017F; 3911 } else { 3912 b43_write16(dev, B43_MMIO_RADIO_CONTROL, B43_RADIOCTL_ID); 3913 tmp = b43_read16(dev, B43_MMIO_RADIO_DATA_LOW); 3914 b43_write16(dev, B43_MMIO_RADIO_CONTROL, B43_RADIOCTL_ID); 3915 tmp |= (u32)b43_read16(dev, B43_MMIO_RADIO_DATA_HIGH) << 16; 3916 } 3917 radio_manuf = (tmp & 0x00000FFF); 3918 radio_ver = (tmp & 0x0FFFF000) >> 12; 3919 radio_rev = (tmp & 0xF0000000) >> 28; 3920 if (radio_manuf != 0x17F /* Broadcom */) 3921 unsupported = 1; 3922 switch (phy_type) { 3923 case B43_PHYTYPE_A: 3924 if (radio_ver != 0x2060) 3925 unsupported = 1; 3926 if (radio_rev != 1) 3927 unsupported = 1; 3928 if (radio_manuf != 0x17F) 3929 unsupported = 1; 3930 break; 3931 case B43_PHYTYPE_B: 3932 if ((radio_ver & 0xFFF0) != 0x2050) 3933 unsupported = 1; 3934 break; 3935 case B43_PHYTYPE_G: 3936 if (radio_ver != 0x2050) 3937 unsupported = 1; 3938 break; 3939 case B43_PHYTYPE_N: 3940 if (radio_ver != 0x2055 && radio_ver != 0x2056) 3941 unsupported = 1; 3942 break; 3943 case B43_PHYTYPE_LP: 3944 if (radio_ver != 0x2062) 3945 unsupported = 1; 3946 break; 3947 default: 3948 B43_WARN_ON(1); 3949 } 3950 if (unsupported) { 3951 b43err(dev->wl, "FOUND UNSUPPORTED RADIO " 3952 "(Manuf 0x%X, Version 0x%X, Revision %u)\n", 3953 radio_manuf, radio_ver, radio_rev); 3954 return -EOPNOTSUPP; 3955 } 3956 b43dbg(dev->wl, "Found Radio: Manuf 0x%X, Version 0x%X, Revision %u\n", 3957 radio_manuf, radio_ver, radio_rev); 3958 3959 phy->radio_manuf = radio_manuf; 3960 phy->radio_ver = radio_ver; 3961 phy->radio_rev = radio_rev; 3962 3963 phy->analog = analog_type; 3964 phy->type = phy_type; 3965 phy->rev = phy_rev; 3966 3967 return 0; 3968} 3969 3970static void setup_struct_phy_for_init(struct b43_wldev *dev, 3971 struct b43_phy *phy) 3972{ 3973 phy->hardware_power_control = !!modparam_hwpctl; 3974 phy->next_txpwr_check_time = jiffies; 3975 /* PHY TX errors counter. */ 3976 atomic_set(&phy->txerr_cnt, B43_PHY_TX_BADNESS_LIMIT); 3977 3978#if B43_DEBUG 3979 phy->phy_locked = 0; 3980 phy->radio_locked = 0; 3981#endif 3982} 3983 3984static void setup_struct_wldev_for_init(struct b43_wldev *dev) 3985{ 3986 dev->dfq_valid = 0; 3987 3988 /* Assume the radio is enabled. If it's not enabled, the state will 3989 * immediately get fixed on the first periodic work run. */ 3990 dev->radio_hw_enable = 1; 3991 3992 /* Stats */ 3993 memset(&dev->stats, 0, sizeof(dev->stats)); 3994 3995 setup_struct_phy_for_init(dev, &dev->phy); 3996 3997 /* IRQ related flags */ 3998 dev->irq_reason = 0; 3999 memset(dev->dma_reason, 0, sizeof(dev->dma_reason)); 4000 dev->irq_savedstate = B43_IRQ_MASKTEMPLATE; 4001 if (b43_modparam_verbose < B43_VERBOSITY_DEBUG) 4002 dev->irq_savedstate &= ~B43_IRQ_PHY_TXERR; 4003 4004 dev->mac_suspended = 1; 4005 4006 /* Noise calculation context */ 4007 memset(&dev->noisecalc, 0, sizeof(dev->noisecalc)); 4008} 4009 4010static void b43_bluetooth_coext_enable(struct b43_wldev *dev) 4011{ 4012 struct ssb_sprom *sprom = &dev->dev->bus->sprom; 4013 u64 hf; 4014 4015 if (!modparam_btcoex) 4016 return; 4017 if (!(sprom->boardflags_lo & B43_BFL_BTCOEXIST)) 4018 return; 4019 if (dev->phy.type != B43_PHYTYPE_B && !dev->phy.gmode) 4020 return; 4021 4022 hf = b43_hf_read(dev); 4023 if (sprom->boardflags_lo & B43_BFL_BTCMOD) 4024 hf |= B43_HF_BTCOEXALT; 4025 else 4026 hf |= B43_HF_BTCOEX; 4027 b43_hf_write(dev, hf); 4028} 4029 4030static void b43_bluetooth_coext_disable(struct b43_wldev *dev) 4031{ 4032 if (!modparam_btcoex) 4033 return; 4034 //TODO 4035} 4036 4037static void b43_imcfglo_timeouts_workaround(struct b43_wldev *dev) 4038{ 4039#ifdef CONFIG_SSB_DRIVER_PCICORE 4040 struct ssb_bus *bus = dev->dev->bus; 4041 u32 tmp; 4042 4043 if (bus->pcicore.dev && 4044 bus->pcicore.dev->id.coreid == SSB_DEV_PCI && 4045 bus->pcicore.dev->id.revision <= 5) { 4046 /* IMCFGLO timeouts workaround. */ 4047 tmp = ssb_read32(dev->dev, SSB_IMCFGLO); 4048 tmp &= ~SSB_IMCFGLO_REQTO; 4049 tmp &= ~SSB_IMCFGLO_SERTO; 4050 switch (bus->bustype) { 4051 case SSB_BUSTYPE_PCI: 4052 case SSB_BUSTYPE_PCMCIA: 4053 tmp |= 0x32; 4054 break; 4055 case SSB_BUSTYPE_SSB: 4056 tmp |= 0x53; 4057 break; 4058 } 4059 ssb_write32(dev->dev, SSB_IMCFGLO, tmp); 4060 } 4061#endif /* CONFIG_SSB_DRIVER_PCICORE */ 4062} 4063 4064static void b43_set_synth_pu_delay(struct b43_wldev *dev, bool idle) 4065{ 4066 u16 pu_delay; 4067 4068 /* The time value is in microseconds. */ 4069 if (dev->phy.type == B43_PHYTYPE_A) 4070 pu_delay = 3700; 4071 else 4072 pu_delay = 1050; 4073 if (b43_is_mode(dev->wl, NL80211_IFTYPE_ADHOC) || idle) 4074 pu_delay = 500; 4075 if ((dev->phy.radio_ver == 0x2050) && (dev->phy.radio_rev == 8)) 4076 pu_delay = max(pu_delay, (u16)2400); 4077 4078 b43_shm_write16(dev, B43_SHM_SHARED, B43_SHM_SH_SPUWKUP, pu_delay); 4079} 4080 4081/* Set the TSF CFP pre-TargetBeaconTransmissionTime. */ 4082static void b43_set_pretbtt(struct b43_wldev *dev) 4083{ 4084 u16 pretbtt; 4085 4086 /* The time value is in microseconds. */ 4087 if (b43_is_mode(dev->wl, NL80211_IFTYPE_ADHOC)) { 4088 pretbtt = 2; 4089 } else { 4090 if (dev->phy.type == B43_PHYTYPE_A) 4091 pretbtt = 120; 4092 else 4093 pretbtt = 250; 4094 } 4095 b43_shm_write16(dev, B43_SHM_SHARED, B43_SHM_SH_PRETBTT, pretbtt); 4096 b43_write16(dev, B43_MMIO_TSF_CFP_PRETBTT, pretbtt); 4097} 4098 4099/* Shutdown a wireless core */ 4100/* Locking: wl->mutex */ 4101static void b43_wireless_core_exit(struct b43_wldev *dev) 4102{ 4103 u32 macctl; 4104 4105 B43_WARN_ON(b43_status(dev) > B43_STAT_INITIALIZED); 4106 if (b43_status(dev) != B43_STAT_INITIALIZED) 4107 return; 4108 b43_set_status(dev, B43_STAT_UNINIT); 4109 4110 /* Stop the microcode PSM. */ 4111 macctl = b43_read32(dev, B43_MMIO_MACCTL); 4112 macctl &= ~B43_MACCTL_PSM_RUN; 4113 macctl |= B43_MACCTL_PSM_JMP0; 4114 b43_write32(dev, B43_MMIO_MACCTL, macctl); 4115 4116 if (!dev->suspend_in_progress) { 4117 b43_leds_exit(dev); 4118 b43_rng_exit(dev->wl); 4119 } 4120 b43_dma_free(dev); 4121 b43_pio_free(dev); 4122 b43_chip_exit(dev); 4123 dev->phy.ops->switch_analog(dev, 0); 4124 if (dev->wl->current_beacon) { 4125 dev_kfree_skb_any(dev->wl->current_beacon); 4126 dev->wl->current_beacon = NULL; 4127 } 4128 4129 ssb_device_disable(dev->dev, 0); 4130 ssb_bus_may_powerdown(dev->dev->bus); 4131} 4132 4133/* Initialize a wireless core */ 4134static int b43_wireless_core_init(struct b43_wldev *dev) 4135{ 4136 struct b43_wl *wl = dev->wl; 4137 struct ssb_bus *bus = dev->dev->bus; 4138 struct ssb_sprom *sprom = &bus->sprom; 4139 struct b43_phy *phy = &dev->phy; 4140 int err; 4141 u64 hf; 4142 u32 tmp; 4143 4144 B43_WARN_ON(b43_status(dev) != B43_STAT_UNINIT); 4145 4146 err = ssb_bus_powerup(bus, 0); 4147 if (err) 4148 goto out; 4149 if (!ssb_device_is_enabled(dev->dev)) { 4150 tmp = phy->gmode ? B43_TMSLOW_GMODE : 0; 4151 b43_wireless_core_reset(dev, tmp); 4152 } 4153 4154 /* Reset all data structures. */ 4155 setup_struct_wldev_for_init(dev); 4156 phy->ops->prepare_structs(dev); 4157 4158 /* Enable IRQ routing to this device. */ 4159 ssb_pcicore_dev_irqvecs_enable(&bus->pcicore, dev->dev); 4160 4161 b43_imcfglo_timeouts_workaround(dev); 4162 b43_bluetooth_coext_disable(dev); 4163 if (phy->ops->prepare_hardware) { 4164 err = phy->ops->prepare_hardware(dev); 4165 if (err) 4166 goto err_busdown; 4167 } 4168 err = b43_chip_init(dev); 4169 if (err) 4170 goto err_busdown; 4171 b43_shm_write16(dev, B43_SHM_SHARED, 4172 B43_SHM_SH_WLCOREREV, dev->dev->id.revision); 4173 hf = b43_hf_read(dev); 4174 if (phy->type == B43_PHYTYPE_G) { 4175 hf |= B43_HF_SYMW; 4176 if (phy->rev == 1) 4177 hf |= B43_HF_GDCW; 4178 if (sprom->boardflags_lo & B43_BFL_PACTRL) 4179 hf |= B43_HF_OFDMPABOOST; 4180 } 4181 if (phy->radio_ver == 0x2050) { 4182 if (phy->radio_rev == 6) 4183 hf |= B43_HF_4318TSSI; 4184 if (phy->radio_rev < 6) 4185 hf |= B43_HF_VCORECALC; 4186 } 4187 if (sprom->boardflags_lo & B43_BFL_XTAL_NOSLOW) 4188 hf |= B43_HF_DSCRQ; /* Disable slowclock requests from ucode. */ 4189#ifdef CONFIG_SSB_DRIVER_PCICORE 4190 if ((bus->bustype == SSB_BUSTYPE_PCI) && 4191 (bus->pcicore.dev->id.revision <= 10)) 4192 hf |= B43_HF_PCISCW; /* PCI slow clock workaround. */ 4193#endif 4194 hf &= ~B43_HF_SKCFPUP; 4195 b43_hf_write(dev, hf); 4196 4197 b43_set_retry_limits(dev, B43_DEFAULT_SHORT_RETRY_LIMIT, 4198 B43_DEFAULT_LONG_RETRY_LIMIT); 4199 b43_shm_write16(dev, B43_SHM_SHARED, B43_SHM_SH_SFFBLIM, 3); 4200 b43_shm_write16(dev, B43_SHM_SHARED, B43_SHM_SH_LFFBLIM, 2); 4201 4202 /* Disable sending probe responses from firmware. 4203 * Setting the MaxTime to one usec will always trigger 4204 * a timeout, so we never send any probe resp. 4205 * A timeout of zero is infinite. */ 4206 b43_shm_write16(dev, B43_SHM_SHARED, B43_SHM_SH_PRMAXTIME, 1); 4207 4208 b43_rate_memory_init(dev); 4209 b43_set_phytxctl_defaults(dev); 4210 4211 /* Minimum Contention Window */ 4212 if (phy->type == B43_PHYTYPE_B) { 4213 b43_shm_write16(dev, B43_SHM_SCRATCH, B43_SHM_SC_MINCONT, 0x1F); 4214 } else { 4215 b43_shm_write16(dev, B43_SHM_SCRATCH, B43_SHM_SC_MINCONT, 0xF); 4216 } 4217 /* Maximum Contention Window */ 4218 b43_shm_write16(dev, B43_SHM_SCRATCH, B43_SHM_SC_MAXCONT, 0x3FF); 4219 4220 if ((dev->dev->bus->bustype == SSB_BUSTYPE_PCMCIA) || B43_FORCE_PIO) { 4221 dev->__using_pio_transfers = 1; 4222 err = b43_pio_init(dev); 4223 } else { 4224 dev->__using_pio_transfers = 0; 4225 err = b43_dma_init(dev); 4226 } 4227 if (err) 4228 goto err_chip_exit; 4229 b43_qos_init(dev); 4230 b43_set_synth_pu_delay(dev, 1); 4231 b43_bluetooth_coext_enable(dev); 4232 4233 ssb_bus_powerup(bus, !(sprom->boardflags_lo & B43_BFL_XTAL_NOSLOW)); 4234 b43_upload_card_macaddress(dev); 4235 b43_security_init(dev); 4236 if (!dev->suspend_in_progress) 4237 b43_rng_init(wl); 4238 4239 b43_set_status(dev, B43_STAT_INITIALIZED); 4240 4241 if (!dev->suspend_in_progress) 4242 b43_leds_init(dev); 4243out: 4244 return err; 4245 4246err_chip_exit: 4247 b43_chip_exit(dev); 4248err_busdown: 4249 ssb_bus_may_powerdown(bus); 4250 B43_WARN_ON(b43_status(dev) != B43_STAT_UNINIT); 4251 return err; 4252} 4253 4254static int b43_op_add_interface(struct ieee80211_hw *hw, 4255 struct ieee80211_if_init_conf *conf) 4256{ 4257 struct b43_wl *wl = hw_to_b43_wl(hw); 4258 struct b43_wldev *dev; 4259 unsigned long flags; 4260 int err = -EOPNOTSUPP; 4261 4262 /* TODO: allow WDS/AP devices to coexist */ 4263 4264 if (conf->type != NL80211_IFTYPE_AP && 4265 conf->type != NL80211_IFTYPE_MESH_POINT && 4266 conf->type != NL80211_IFTYPE_STATION && 4267 conf->type != NL80211_IFTYPE_WDS && 4268 conf->type != NL80211_IFTYPE_ADHOC) 4269 return -EOPNOTSUPP; 4270 4271 mutex_lock(&wl->mutex); 4272 if (wl->operating) 4273 goto out_mutex_unlock; 4274 4275 b43dbg(wl, "Adding Interface type %d\n", conf->type); 4276 4277 dev = wl->current_dev; 4278 wl->operating = 1; 4279 wl->vif = conf->vif; 4280 wl->if_type = conf->type; 4281 memcpy(wl->mac_addr, conf->mac_addr, ETH_ALEN); 4282 4283 spin_lock_irqsave(&wl->irq_lock, flags); 4284 b43_adjust_opmode(dev); 4285 b43_set_pretbtt(dev); 4286 b43_set_synth_pu_delay(dev, 0); 4287 b43_upload_card_macaddress(dev); 4288 spin_unlock_irqrestore(&wl->irq_lock, flags); 4289 4290 err = 0; 4291 out_mutex_unlock: 4292 mutex_unlock(&wl->mutex); 4293 4294 return err; 4295} 4296 4297static void b43_op_remove_interface(struct ieee80211_hw *hw, 4298 struct ieee80211_if_init_conf *conf) 4299{ 4300 struct b43_wl *wl = hw_to_b43_wl(hw); 4301 struct b43_wldev *dev = wl->current_dev; 4302 unsigned long flags; 4303 4304 b43dbg(wl, "Removing Interface type %d\n", conf->type); 4305 4306 mutex_lock(&wl->mutex); 4307 4308 B43_WARN_ON(!wl->operating); 4309 B43_WARN_ON(wl->vif != conf->vif); 4310 wl->vif = NULL; 4311 4312 wl->operating = 0; 4313 4314 spin_lock_irqsave(&wl->irq_lock, flags); 4315 b43_adjust_opmode(dev); 4316 memset(wl->mac_addr, 0, ETH_ALEN); 4317 b43_upload_card_macaddress(dev); 4318 spin_unlock_irqrestore(&wl->irq_lock, flags); 4319 4320 mutex_unlock(&wl->mutex); 4321} 4322 4323static int b43_op_start(struct ieee80211_hw *hw) 4324{ 4325 struct b43_wl *wl = hw_to_b43_wl(hw); 4326 struct b43_wldev *dev = wl->current_dev; 4327 int did_init = 0; 4328 int err = 0; 4329 bool do_rfkill_exit = 0; 4330 4331 /* Kill all old instance specific information to make sure 4332 * the card won't use it in the short timeframe between start 4333 * and mac80211 reconfiguring it. */ 4334 memset(wl->bssid, 0, ETH_ALEN); 4335 memset(wl->mac_addr, 0, ETH_ALEN); 4336 wl->filter_flags = 0; 4337 wl->radiotap_enabled = 0; 4338 b43_qos_clear(wl); 4339 wl->beacon0_uploaded = 0; 4340 wl->beacon1_uploaded = 0; 4341 wl->beacon_templates_virgin = 1; 4342 4343 /* First register RFkill. 4344 * LEDs that are registered later depend on it. */ 4345 b43_rfkill_init(dev); 4346 4347 mutex_lock(&wl->mutex); 4348 4349 if (b43_status(dev) < B43_STAT_INITIALIZED) { 4350 err = b43_wireless_core_init(dev); 4351 if (err) { 4352 do_rfkill_exit = 1; 4353 goto out_mutex_unlock; 4354 } 4355 did_init = 1; 4356 } 4357 4358 if (b43_status(dev) < B43_STAT_STARTED) { 4359 err = b43_wireless_core_start(dev); 4360 if (err) { 4361 if (did_init) 4362 b43_wireless_core_exit(dev); 4363 do_rfkill_exit = 1; 4364 goto out_mutex_unlock; 4365 } 4366 } 4367 4368 out_mutex_unlock: 4369 mutex_unlock(&wl->mutex); 4370 4371 if (do_rfkill_exit) 4372 b43_rfkill_exit(dev); 4373 4374 return err; 4375} 4376 4377static void b43_op_stop(struct ieee80211_hw *hw) 4378{ 4379 struct b43_wl *wl = hw_to_b43_wl(hw); 4380 struct b43_wldev *dev = wl->current_dev; 4381 4382 b43_rfkill_exit(dev); 4383 cancel_work_sync(&(wl->beacon_update_trigger)); 4384 4385 mutex_lock(&wl->mutex); 4386 if (b43_status(dev) >= B43_STAT_STARTED) 4387 b43_wireless_core_stop(dev); 4388 b43_wireless_core_exit(dev); 4389 mutex_unlock(&wl->mutex); 4390 4391 cancel_work_sync(&(wl->txpower_adjust_work)); 4392} 4393 4394static int b43_op_beacon_set_tim(struct ieee80211_hw *hw, 4395 struct ieee80211_sta *sta, bool set) 4396{ 4397 struct b43_wl *wl = hw_to_b43_wl(hw); 4398 unsigned long flags; 4399 4400 spin_lock_irqsave(&wl->irq_lock, flags); 4401 b43_update_templates(wl); 4402 spin_unlock_irqrestore(&wl->irq_lock, flags); 4403 4404 return 0; 4405} 4406 4407static void b43_op_sta_notify(struct ieee80211_hw *hw, 4408 struct ieee80211_vif *vif, 4409 enum sta_notify_cmd notify_cmd, 4410 struct ieee80211_sta *sta) 4411{ 4412 struct b43_wl *wl = hw_to_b43_wl(hw); 4413 4414 B43_WARN_ON(!vif || wl->vif != vif); 4415} 4416 4417static void b43_op_sw_scan_start_notifier(struct ieee80211_hw *hw) 4418{ 4419 struct b43_wl *wl = hw_to_b43_wl(hw); 4420 struct b43_wldev *dev; 4421 4422 mutex_lock(&wl->mutex); 4423 dev = wl->current_dev; 4424 if (dev && (b43_status(dev) >= B43_STAT_INITIALIZED)) { 4425 /* Disable CFP update during scan on other channels. */ 4426 b43_hf_write(dev, b43_hf_read(dev) | B43_HF_SKCFPUP); 4427 } 4428 mutex_unlock(&wl->mutex); 4429} 4430 4431static void b43_op_sw_scan_complete_notifier(struct ieee80211_hw *hw) 4432{ 4433 struct b43_wl *wl = hw_to_b43_wl(hw); 4434 struct b43_wldev *dev; 4435 4436 mutex_lock(&wl->mutex); 4437 dev = wl->current_dev; 4438 if (dev && (b43_status(dev) >= B43_STAT_INITIALIZED)) { 4439 /* Re-enable CFP update. */ 4440 b43_hf_write(dev, b43_hf_read(dev) & ~B43_HF_SKCFPUP); 4441 } 4442 mutex_unlock(&wl->mutex); 4443} 4444 4445static const struct ieee80211_ops b43_hw_ops = { 4446 .tx = b43_op_tx, 4447 .conf_tx = b43_op_conf_tx, 4448 .add_interface = b43_op_add_interface, 4449 .remove_interface = b43_op_remove_interface, 4450 .config = b43_op_config, 4451 .bss_info_changed = b43_op_bss_info_changed, 4452 .config_interface = b43_op_config_interface, 4453 .configure_filter = b43_op_configure_filter, 4454 .set_key = b43_op_set_key, 4455 .get_stats = b43_op_get_stats, 4456 .get_tx_stats = b43_op_get_tx_stats, 4457 .get_tsf = b43_op_get_tsf, 4458 .set_tsf = b43_op_set_tsf, 4459 .start = b43_op_start, 4460 .stop = b43_op_stop, 4461 .set_tim = b43_op_beacon_set_tim, 4462 .sta_notify = b43_op_sta_notify, 4463 .sw_scan_start = b43_op_sw_scan_start_notifier, 4464 .sw_scan_complete = b43_op_sw_scan_complete_notifier, 4465}; 4466 4467/* Hard-reset the chip. Do not call this directly. 4468 * Use b43_controller_restart() 4469 */ 4470static void b43_chip_reset(struct work_struct *work) 4471{ 4472 struct b43_wldev *dev = 4473 container_of(work, struct b43_wldev, restart_work); 4474 struct b43_wl *wl = dev->wl; 4475 int err = 0; 4476 int prev_status; 4477 4478 mutex_lock(&wl->mutex); 4479 4480 prev_status = b43_status(dev); 4481 /* Bring the device down... */ 4482 if (prev_status >= B43_STAT_STARTED) 4483 b43_wireless_core_stop(dev); 4484 if (prev_status >= B43_STAT_INITIALIZED) 4485 b43_wireless_core_exit(dev); 4486 4487 /* ...and up again. */ 4488 if (prev_status >= B43_STAT_INITIALIZED) { 4489 err = b43_wireless_core_init(dev); 4490 if (err) 4491 goto out; 4492 } 4493 if (prev_status >= B43_STAT_STARTED) { 4494 err = b43_wireless_core_start(dev); 4495 if (err) { 4496 b43_wireless_core_exit(dev); 4497 goto out; 4498 } 4499 } 4500out: 4501 if (err) 4502 wl->current_dev = NULL; /* Failed to init the dev. */ 4503 mutex_unlock(&wl->mutex); 4504 if (err) 4505 b43err(wl, "Controller restart FAILED\n"); 4506 else 4507 b43info(wl, "Controller restarted\n"); 4508} 4509 4510static int b43_setup_bands(struct b43_wldev *dev, 4511 bool have_2ghz_phy, bool have_5ghz_phy) 4512{ 4513 struct ieee80211_hw *hw = dev->wl->hw; 4514 4515 if (have_2ghz_phy) 4516 hw->wiphy->bands[IEEE80211_BAND_2GHZ] = &b43_band_2GHz; 4517 if (dev->phy.type == B43_PHYTYPE_N) { 4518 if (have_5ghz_phy) 4519 hw->wiphy->bands[IEEE80211_BAND_5GHZ] = &b43_band_5GHz_nphy; 4520 } else { 4521 if (have_5ghz_phy) 4522 hw->wiphy->bands[IEEE80211_BAND_5GHZ] = &b43_band_5GHz_aphy; 4523 } 4524 4525 dev->phy.supports_2ghz = have_2ghz_phy; 4526 dev->phy.supports_5ghz = have_5ghz_phy; 4527 4528 return 0; 4529} 4530 4531static void b43_wireless_core_detach(struct b43_wldev *dev) 4532{ 4533 /* We release firmware that late to not be required to re-request 4534 * is all the time when we reinit the core. */ 4535 b43_release_firmware(dev); 4536 b43_phy_free(dev); 4537} 4538 4539static int b43_wireless_core_attach(struct b43_wldev *dev) 4540{ 4541 struct b43_wl *wl = dev->wl; 4542 struct ssb_bus *bus = dev->dev->bus; 4543 struct pci_dev *pdev = bus->host_pci; 4544 int err; 4545 bool have_2ghz_phy = 0, have_5ghz_phy = 0; 4546 u32 tmp; 4547 4548 /* Do NOT do any device initialization here. 4549 * Do it in wireless_core_init() instead. 4550 * This function is for gathering basic information about the HW, only. 4551 * Also some structs may be set up here. But most likely you want to have 4552 * that in core_init(), too. 4553 */ 4554 4555 err = ssb_bus_powerup(bus, 0); 4556 if (err) { 4557 b43err(wl, "Bus powerup failed\n"); 4558 goto out; 4559 } 4560 /* Get the PHY type. */ 4561 if (dev->dev->id.revision >= 5) { 4562 u32 tmshigh; 4563 4564 tmshigh = ssb_read32(dev->dev, SSB_TMSHIGH); 4565 have_2ghz_phy = !!(tmshigh & B43_TMSHIGH_HAVE_2GHZ_PHY); 4566 have_5ghz_phy = !!(tmshigh & B43_TMSHIGH_HAVE_5GHZ_PHY); 4567 } else 4568 B43_WARN_ON(1); 4569 4570 dev->phy.gmode = have_2ghz_phy; 4571 tmp = dev->phy.gmode ? B43_TMSLOW_GMODE : 0; 4572 b43_wireless_core_reset(dev, tmp); 4573 4574 err = b43_phy_versioning(dev); 4575 if (err) 4576 goto err_powerdown; 4577 /* Check if this device supports multiband. */ 4578 if (!pdev || 4579 (pdev->device != 0x4312 && 4580 pdev->device != 0x4319 && pdev->device != 0x4324)) { 4581 /* No multiband support. */ 4582 have_2ghz_phy = 0; 4583 have_5ghz_phy = 0; 4584 switch (dev->phy.type) { 4585 case B43_PHYTYPE_A: 4586 have_5ghz_phy = 1; 4587 break; 4588 case B43_PHYTYPE_G: 4589 case B43_PHYTYPE_N: 4590 case B43_PHYTYPE_LP: 4591 have_2ghz_phy = 1; 4592 break; 4593 default: 4594 B43_WARN_ON(1); 4595 } 4596 } 4597 if (dev->phy.type == B43_PHYTYPE_A) { 4598 /* FIXME */ 4599 b43err(wl, "IEEE 802.11a devices are unsupported\n"); 4600 err = -EOPNOTSUPP; 4601 goto err_powerdown; 4602 } 4603 if (1 /* disable A-PHY */) { 4604 /* FIXME: For now we disable the A-PHY on multi-PHY devices. */ 4605 if (dev->phy.type != B43_PHYTYPE_N) { 4606 have_2ghz_phy = 1; 4607 have_5ghz_phy = 0; 4608 } 4609 } 4610 4611 err = b43_phy_allocate(dev); 4612 if (err) 4613 goto err_powerdown; 4614 4615 dev->phy.gmode = have_2ghz_phy; 4616 tmp = dev->phy.gmode ? B43_TMSLOW_GMODE : 0; 4617 b43_wireless_core_reset(dev, tmp); 4618 4619 err = b43_validate_chipaccess(dev); 4620 if (err) 4621 goto err_phy_free; 4622 err = b43_setup_bands(dev, have_2ghz_phy, have_5ghz_phy); 4623 if (err) 4624 goto err_phy_free; 4625 4626 /* Now set some default "current_dev" */ 4627 if (!wl->current_dev) 4628 wl->current_dev = dev; 4629 INIT_WORK(&dev->restart_work, b43_chip_reset); 4630 4631 dev->phy.ops->switch_analog(dev, 0); 4632 ssb_device_disable(dev->dev, 0); 4633 ssb_bus_may_powerdown(bus); 4634 4635out: 4636 return err; 4637 4638err_phy_free: 4639 b43_phy_free(dev); 4640err_powerdown: 4641 ssb_bus_may_powerdown(bus); 4642 return err; 4643} 4644 4645static void b43_one_core_detach(struct ssb_device *dev) 4646{ 4647 struct b43_wldev *wldev; 4648 struct b43_wl *wl; 4649 4650 /* Do not cancel ieee80211-workqueue based work here. 4651 * See comment in b43_remove(). */ 4652 4653 wldev = ssb_get_drvdata(dev); 4654 wl = wldev->wl; 4655 b43_debugfs_remove_device(wldev); 4656 b43_wireless_core_detach(wldev); 4657 list_del(&wldev->list); 4658 wl->nr_devs--; 4659 ssb_set_drvdata(dev, NULL); 4660 kfree(wldev); 4661} 4662 4663static int b43_one_core_attach(struct ssb_device *dev, struct b43_wl *wl) 4664{ 4665 struct b43_wldev *wldev; 4666 struct pci_dev *pdev; 4667 int err = -ENOMEM; 4668 4669 if (!list_empty(&wl->devlist)) { 4670 /* We are not the first core on this chip. */ 4671 pdev = dev->bus->host_pci; 4672 /* Only special chips support more than one wireless 4673 * core, although some of the other chips have more than 4674 * one wireless core as well. Check for this and 4675 * bail out early. 4676 */ 4677 if (!pdev || 4678 ((pdev->device != 0x4321) && 4679 (pdev->device != 0x4313) && (pdev->device != 0x431A))) { 4680 b43dbg(wl, "Ignoring unconnected 802.11 core\n"); 4681 return -ENODEV; 4682 } 4683 } 4684 4685 wldev = kzalloc(sizeof(*wldev), GFP_KERNEL); 4686 if (!wldev) 4687 goto out; 4688 4689 wldev->dev = dev; 4690 wldev->wl = wl; 4691 b43_set_status(wldev, B43_STAT_UNINIT); 4692 wldev->bad_frames_preempt = modparam_bad_frames_preempt; 4693 tasklet_init(&wldev->isr_tasklet, 4694 (void (*)(unsigned long))b43_interrupt_tasklet, 4695 (unsigned long)wldev); 4696 INIT_LIST_HEAD(&wldev->list); 4697 4698 err = b43_wireless_core_attach(wldev); 4699 if (err) 4700 goto err_kfree_wldev; 4701 4702 list_add(&wldev->list, &wl->devlist); 4703 wl->nr_devs++; 4704 ssb_set_drvdata(dev, wldev); 4705 b43_debugfs_add_device(wldev); 4706 4707 out: 4708 return err; 4709 4710 err_kfree_wldev: 4711 kfree(wldev); 4712 return err; 4713} 4714 4715#define IS_PDEV(pdev, _vendor, _device, _subvendor, _subdevice) ( \ 4716 (pdev->vendor == PCI_VENDOR_ID_##_vendor) && \ 4717 (pdev->device == _device) && \ 4718 (pdev->subsystem_vendor == PCI_VENDOR_ID_##_subvendor) && \ 4719 (pdev->subsystem_device == _subdevice) ) 4720 4721static void b43_sprom_fixup(struct ssb_bus *bus) 4722{ 4723 struct pci_dev *pdev; 4724 4725 /* boardflags workarounds */ 4726 if (bus->boardinfo.vendor == SSB_BOARDVENDOR_DELL && 4727 bus->chip_id == 0x4301 && bus->boardinfo.rev == 0x74) 4728 bus->sprom.boardflags_lo |= B43_BFL_BTCOEXIST; 4729 if (bus->boardinfo.vendor == PCI_VENDOR_ID_APPLE && 4730 bus->boardinfo.type == 0x4E && bus->boardinfo.rev > 0x40) 4731 bus->sprom.boardflags_lo |= B43_BFL_PACTRL; 4732 if (bus->bustype == SSB_BUSTYPE_PCI) { 4733 pdev = bus->host_pci; 4734 if (IS_PDEV(pdev, BROADCOM, 0x4318, ASUSTEK, 0x100F) || 4735 IS_PDEV(pdev, BROADCOM, 0x4320, DELL, 0x0003) || 4736 IS_PDEV(pdev, BROADCOM, 0x4320, HP, 0x12f8) || 4737 IS_PDEV(pdev, BROADCOM, 0x4320, LINKSYS, 0x0015) || 4738 IS_PDEV(pdev, BROADCOM, 0x4320, LINKSYS, 0x0014) || 4739 IS_PDEV(pdev, BROADCOM, 0x4320, LINKSYS, 0x0013) || 4740 IS_PDEV(pdev, BROADCOM, 0x4320, MOTOROLA, 0x7010)) 4741 bus->sprom.boardflags_lo &= ~B43_BFL_BTCOEXIST; 4742 } 4743} 4744 4745static void b43_wireless_exit(struct ssb_device *dev, struct b43_wl *wl) 4746{ 4747 struct ieee80211_hw *hw = wl->hw; 4748 4749 ssb_set_devtypedata(dev, NULL); 4750 ieee80211_free_hw(hw); 4751} 4752 4753static int b43_wireless_init(struct ssb_device *dev) 4754{ 4755 struct ssb_sprom *sprom = &dev->bus->sprom; 4756 struct ieee80211_hw *hw; 4757 struct b43_wl *wl; 4758 int err = -ENOMEM; 4759 4760 b43_sprom_fixup(dev->bus); 4761 4762 hw = ieee80211_alloc_hw(sizeof(*wl), &b43_hw_ops); 4763 if (!hw) { 4764 b43err(NULL, "Could not allocate ieee80211 device\n"); 4765 goto out; 4766 } 4767 4768 /* fill hw info */ 4769 hw->flags = IEEE80211_HW_RX_INCLUDES_FCS | 4770 IEEE80211_HW_SIGNAL_DBM | 4771 IEEE80211_HW_NOISE_DBM; 4772 4773 hw->wiphy->interface_modes = 4774 BIT(NL80211_IFTYPE_AP) | 4775 BIT(NL80211_IFTYPE_MESH_POINT) | 4776 BIT(NL80211_IFTYPE_STATION) | 4777 BIT(NL80211_IFTYPE_WDS) | 4778 BIT(NL80211_IFTYPE_ADHOC); 4779 4780 hw->queues = b43_modparam_qos ? 4 : 1; 4781 hw->max_rates = 2; 4782 SET_IEEE80211_DEV(hw, dev->dev); 4783 if (is_valid_ether_addr(sprom->et1mac)) 4784 SET_IEEE80211_PERM_ADDR(hw, sprom->et1mac); 4785 else 4786 SET_IEEE80211_PERM_ADDR(hw, sprom->il0mac); 4787 4788 /* Get and initialize struct b43_wl */ 4789 wl = hw_to_b43_wl(hw); 4790 memset(wl, 0, sizeof(*wl)); 4791 wl->hw = hw; 4792 spin_lock_init(&wl->irq_lock); 4793 rwlock_init(&wl->tx_lock); 4794 spin_lock_init(&wl->leds_lock); 4795 spin_lock_init(&wl->shm_lock); 4796 mutex_init(&wl->mutex); 4797 INIT_LIST_HEAD(&wl->devlist); 4798 INIT_WORK(&wl->beacon_update_trigger, b43_beacon_update_trigger_work); 4799 INIT_WORK(&wl->txpower_adjust_work, b43_phy_txpower_adjust_work); 4800 4801 ssb_set_devtypedata(dev, wl); 4802 b43info(wl, "Broadcom %04X WLAN found (core revision %u)\n", 4803 dev->bus->chip_id, dev->id.revision); 4804 err = 0; 4805out: 4806 return err; 4807} 4808 4809static int b43_probe(struct ssb_device *dev, const struct ssb_device_id *id) 4810{ 4811 struct b43_wl *wl; 4812 int err; 4813 int first = 0; 4814 4815 wl = ssb_get_devtypedata(dev); 4816 if (!wl) { 4817 /* Probing the first core. Must setup common struct b43_wl */ 4818 first = 1; 4819 err = b43_wireless_init(dev); 4820 if (err) 4821 goto out; 4822 wl = ssb_get_devtypedata(dev); 4823 B43_WARN_ON(!wl); 4824 } 4825 err = b43_one_core_attach(dev, wl); 4826 if (err) 4827 goto err_wireless_exit; 4828 4829 if (first) { 4830 err = ieee80211_register_hw(wl->hw); 4831 if (err) 4832 goto err_one_core_detach; 4833 } 4834 4835 out: 4836 return err; 4837 4838 err_one_core_detach: 4839 b43_one_core_detach(dev); 4840 err_wireless_exit: 4841 if (first) 4842 b43_wireless_exit(dev, wl); 4843 return err; 4844} 4845 4846static void b43_remove(struct ssb_device *dev) 4847{ 4848 struct b43_wl *wl = ssb_get_devtypedata(dev); 4849 struct b43_wldev *wldev = ssb_get_drvdata(dev); 4850 4851 /* We must cancel any work here before unregistering from ieee80211, 4852 * as the ieee80211 unreg will destroy the workqueue. */ 4853 cancel_work_sync(&wldev->restart_work); 4854 4855 B43_WARN_ON(!wl); 4856 if (wl->current_dev == wldev) 4857 ieee80211_unregister_hw(wl->hw); 4858 4859 b43_one_core_detach(dev); 4860 4861 if (list_empty(&wl->devlist)) { 4862 /* Last core on the chip unregistered. 4863 * We can destroy common struct b43_wl. 4864 */ 4865 b43_wireless_exit(dev, wl); 4866 } 4867} 4868 4869/* Perform a hardware reset. This can be called from any context. */ 4870void b43_controller_restart(struct b43_wldev *dev, const char *reason) 4871{ 4872 /* Must avoid requeueing, if we are in shutdown. */ 4873 if (b43_status(dev) < B43_STAT_INITIALIZED) 4874 return; 4875 b43info(dev->wl, "Controller RESET (%s) ...\n", reason); 4876 queue_work(dev->wl->hw->workqueue, &dev->restart_work); 4877} 4878 4879#ifdef CONFIG_PM 4880 4881static int b43_suspend(struct ssb_device *dev, pm_message_t state) 4882{ 4883 struct b43_wldev *wldev = ssb_get_drvdata(dev); 4884 struct b43_wl *wl = wldev->wl; 4885 4886 b43dbg(wl, "Suspending...\n"); 4887 4888 mutex_lock(&wl->mutex); 4889 wldev->suspend_in_progress = true; 4890 wldev->suspend_init_status = b43_status(wldev); 4891 if (wldev->suspend_init_status >= B43_STAT_STARTED) 4892 b43_wireless_core_stop(wldev); 4893 if (wldev->suspend_init_status >= B43_STAT_INITIALIZED) 4894 b43_wireless_core_exit(wldev); 4895 mutex_unlock(&wl->mutex); 4896 4897 b43dbg(wl, "Device suspended.\n"); 4898 4899 return 0; 4900} 4901 4902static int b43_resume(struct ssb_device *dev) 4903{ 4904 struct b43_wldev *wldev = ssb_get_drvdata(dev); 4905 struct b43_wl *wl = wldev->wl; 4906 int err = 0; 4907 4908 b43dbg(wl, "Resuming...\n"); 4909 4910 mutex_lock(&wl->mutex); 4911 if (wldev->suspend_init_status >= B43_STAT_INITIALIZED) { 4912 err = b43_wireless_core_init(wldev); 4913 if (err) { 4914 b43err(wl, "Resume failed at core init\n"); 4915 goto out; 4916 } 4917 } 4918 if (wldev->suspend_init_status >= B43_STAT_STARTED) { 4919 err = b43_wireless_core_start(wldev); 4920 if (err) { 4921 b43_leds_exit(wldev); 4922 b43_rng_exit(wldev->wl); 4923 b43_wireless_core_exit(wldev); 4924 b43err(wl, "Resume failed at core start\n"); 4925 goto out; 4926 } 4927 } 4928 b43dbg(wl, "Device resumed.\n"); 4929 out: 4930 wldev->suspend_in_progress = false; 4931 mutex_unlock(&wl->mutex); 4932 return err; 4933} 4934 4935#else /* CONFIG_PM */ 4936# define b43_suspend NULL 4937# define b43_resume NULL 4938#endif /* CONFIG_PM */ 4939 4940static struct ssb_driver b43_ssb_driver = { 4941 .name = KBUILD_MODNAME, 4942 .id_table = b43_ssb_tbl, 4943 .probe = b43_probe, 4944 .remove = b43_remove, 4945 .suspend = b43_suspend, 4946 .resume = b43_resume, 4947}; 4948 4949static void b43_print_driverinfo(void) 4950{ 4951 const char *feat_pci = "", *feat_pcmcia = "", *feat_nphy = "", 4952 *feat_leds = "", *feat_rfkill = ""; 4953 4954#ifdef CONFIG_B43_PCI_AUTOSELECT 4955 feat_pci = "P"; 4956#endif 4957#ifdef CONFIG_B43_PCMCIA 4958 feat_pcmcia = "M"; 4959#endif 4960#ifdef CONFIG_B43_NPHY 4961 feat_nphy = "N"; 4962#endif 4963#ifdef CONFIG_B43_LEDS 4964 feat_leds = "L"; 4965#endif 4966#ifdef CONFIG_B43_RFKILL 4967 feat_rfkill = "R"; 4968#endif 4969 printk(KERN_INFO "Broadcom 43xx driver loaded " 4970 "[ Features: %s%s%s%s%s, Firmware-ID: " 4971 B43_SUPPORTED_FIRMWARE_ID " ]\n", 4972 feat_pci, feat_pcmcia, feat_nphy, 4973 feat_leds, feat_rfkill); 4974} 4975 4976static int __init b43_init(void) 4977{ 4978 int err; 4979 4980 b43_debugfs_init(); 4981 err = b43_pcmcia_init(); 4982 if (err) 4983 goto err_dfs_exit; 4984 err = ssb_driver_register(&b43_ssb_driver); 4985 if (err) 4986 goto err_pcmcia_exit; 4987 b43_print_driverinfo(); 4988 4989 return err; 4990 4991err_pcmcia_exit: 4992 b43_pcmcia_exit(); 4993err_dfs_exit: 4994 b43_debugfs_exit(); 4995 return err; 4996} 4997 4998static void __exit b43_exit(void) 4999{ 5000 ssb_driver_unregister(&b43_ssb_driver); 5001 b43_pcmcia_exit(); 5002 b43_debugfs_exit(); 5003} 5004 5005module_init(b43_init) 5006module_exit(b43_exit) 5007