cmd.h revision ff25839bf0c99e828c26864a24417a36a6b6a31e
1/*
2 * This file is part of wl12xx
3 *
4 * Copyright (c) 1998-2007 Texas Instruments Incorporated
5 * Copyright (C) 2008 Nokia Corporation
6 *
7 * Contact: Kalle Valo <kalle.valo@nokia.com>
8 *
9 * This program is free software; you can redistribute it and/or
10 * modify it under the terms of the GNU General Public License
11 * version 2 as published by the Free Software Foundation.
12 *
13 * This program is distributed in the hope that it will be useful, but
14 * WITHOUT ANY WARRANTY; without even the implied warranty of
15 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
16 * General Public License for more details.
17 *
18 * You should have received a copy of the GNU General Public License
19 * along with this program; if not, write to the Free Software
20 * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
21 * 02110-1301 USA
22 *
23 */
24
25#ifndef __WL12XX_CMD_H__
26#define __WL12XX_CMD_H__
27
28#include "wl12xx.h"
29
30struct acx_header;
31
32int wl12xx_cmd_send(struct wl12xx *wl, u16 type, void *buf, size_t buf_len);
33int wl12xx_cmd_test(struct wl12xx *wl, void *buf, size_t buf_len, u8 answer);
34int wl12xx_cmd_interrogate(struct wl12xx *wl, u16 id, void *buf, size_t len);
35int wl12xx_cmd_configure(struct wl12xx *wl, u16 id, void *buf, size_t len);
36int wl12xx_cmd_vbm(struct wl12xx *wl, u8 identity,
37		   void *bitmap, u16 bitmap_len, u8 bitmap_control);
38int wl12xx_cmd_data_path(struct wl12xx *wl, u8 channel, bool enable);
39int wl12xx_cmd_join(struct wl12xx *wl, u8 bss_type, u8 dtim_interval,
40		    u16 beacon_interval, u8 wait);
41int wl12xx_cmd_ps_mode(struct wl12xx *wl, u8 ps_mode);
42int wl12xx_cmd_read_memory(struct wl12xx *wl, u32 addr, void *answer,
43			   size_t len);
44int wl12xx_cmd_template_set(struct wl12xx *wl, u16 cmd_id,
45			    void *buf, size_t buf_len);
46
47/* unit ms */
48#define WL12XX_COMMAND_TIMEOUT 2000
49
50enum wl12xx_commands {
51	CMD_RESET           = 0,
52	CMD_INTERROGATE     = 1,    /*use this to read information elements*/
53	CMD_CONFIGURE       = 2,    /*use this to write information elements*/
54	CMD_ENABLE_RX       = 3,
55	CMD_ENABLE_TX       = 4,
56	CMD_DISABLE_RX      = 5,
57	CMD_DISABLE_TX      = 6,
58	CMD_SCAN            = 8,
59	CMD_STOP_SCAN       = 9,
60	CMD_VBM             = 10,
61	CMD_START_JOIN      = 11,
62	CMD_SET_KEYS        = 12,
63	CMD_READ_MEMORY     = 13,
64	CMD_WRITE_MEMORY    = 14,
65	CMD_BEACON          = 19,
66	CMD_PROBE_RESP      = 20,
67	CMD_NULL_DATA       = 21,
68	CMD_PROBE_REQ       = 22,
69	CMD_TEST            = 23,
70	CMD_RADIO_CALIBRATE     = 25,   /* OBSOLETE */
71	CMD_ENABLE_RX_PATH      = 27,   /* OBSOLETE */
72	CMD_NOISE_HIST      = 28,
73	CMD_RX_RESET        = 29,
74	CMD_PS_POLL         = 30,
75	CMD_QOS_NULL_DATA   = 31,
76	CMD_LNA_CONTROL     = 32,
77	CMD_SET_BCN_MODE    = 33,
78	CMD_MEASUREMENT      = 34,
79	CMD_STOP_MEASUREMENT = 35,
80	CMD_DISCONNECT       = 36,
81	CMD_SET_PS_MODE      = 37,
82	CMD_CHANNEL_SWITCH   = 38,
83	CMD_STOP_CHANNEL_SWICTH = 39,
84	CMD_AP_DISCOVERY     = 40,
85	CMD_STOP_AP_DISCOVERY = 41,
86	CMD_SPS_SCAN = 42,
87	CMD_STOP_SPS_SCAN = 43,
88	CMD_HEALTH_CHECK     = 45,
89	CMD_DEBUG            = 46,
90	CMD_TRIGGER_SCAN_TO  = 47,
91
92	NUM_COMMANDS,
93	MAX_COMMAND_ID = 0xFFFF,
94};
95
96#define MAX_CMD_PARAMS 572
97
98struct wl12xx_cmd_header {
99	u16 id;
100	u16 status;
101	/* payload */
102	u8 data[0];
103} __attribute__ ((packed));
104
105struct  wl12xx_command {
106	struct wl12xx_cmd_header header;
107	u8  parameters[MAX_CMD_PARAMS];
108};
109
110enum {
111	CMD_MAILBOX_IDLE              		=  0,
112	CMD_STATUS_SUCCESS            		=  1,
113	CMD_STATUS_UNKNOWN_CMD        		=  2,
114	CMD_STATUS_UNKNOWN_IE         		=  3,
115	CMD_STATUS_REJECT_MEAS_SG_ACTIVE 	= 11,
116	CMD_STATUS_RX_BUSY            		= 13,
117	CMD_STATUS_INVALID_PARAM      		= 14,
118	CMD_STATUS_TEMPLATE_TOO_LARGE 		= 15,
119	CMD_STATUS_OUT_OF_MEMORY      		= 16,
120	CMD_STATUS_STA_TABLE_FULL     		= 17,
121	CMD_STATUS_RADIO_ERROR        		= 18,
122	CMD_STATUS_WRONG_NESTING      		= 19,
123	CMD_STATUS_TIMEOUT            		= 21, /* Driver internal use.*/
124	CMD_STATUS_FW_RESET           		= 22, /* Driver internal use.*/
125	MAX_COMMAND_STATUS            		= 0xff
126};
127
128
129/*
130 * CMD_READ_MEMORY
131 *
132 * The host issues this command to read the WiLink device memory/registers.
133 *
134 * Note: The Base Band address has special handling (16 bits registers and
135 * addresses). For more information, see the hardware specification.
136 */
137/*
138 * CMD_WRITE_MEMORY
139 *
140 * The host issues this command to write the WiLink device memory/registers.
141 *
142 * The Base Band address has special handling (16 bits registers and
143 * addresses). For more information, see the hardware specification.
144 */
145#define MAX_READ_SIZE 256
146
147struct cmd_read_write_memory {
148	struct wl12xx_cmd_header header;
149
150	/* The address of the memory to read from or write to.*/
151	u32 addr;
152
153	/* The amount of data in bytes to read from or write to the WiLink
154	 * device.*/
155	u32 size;
156
157	/* The actual value read from or written to the Wilink. The source
158	   of this field is the Host in WRITE command or the Wilink in READ
159	   command. */
160	u8 value[MAX_READ_SIZE];
161};
162
163#define CMDMBOX_HEADER_LEN 4
164#define CMDMBOX_INFO_ELEM_HEADER_LEN 4
165
166
167struct basic_scan_parameters {
168	u32 rx_config_options;
169	u32 rx_filter_options;
170
171	/*
172	 * Scan options:
173	 * bit 0: When this bit is set, passive scan.
174	 * bit 1: Band, when this bit is set we scan
175	 * in the 5Ghz band.
176	 * bit 2: voice mode, 0 for normal scan.
177	 * bit 3: scan priority, 1 for high priority.
178	 */
179	u16 scan_options;
180
181	/* Number of channels to scan */
182	u8 num_channels;
183
184	/* Number opf probe requests to send, per channel */
185	u8 num_probe_requests;
186
187	/* Rate and modulation for probe requests */
188	u16 tx_rate;
189
190	u8 tid_trigger;
191	u8 ssid_len;
192	u32 ssid[8];
193
194} __attribute__ ((packed));
195
196struct basic_scan_channel_parameters {
197	u32 min_duration; /* in TU */
198	u32 max_duration; /* in TU */
199	u32 bssid_lsb;
200	u16 bssid_msb;
201
202	/*
203	 * bits 0-3: Early termination count.
204	 * bits 4-5: Early termination condition.
205	 */
206	u8 early_termination;
207
208	u8 tx_power_att;
209	u8 channel;
210	u8 pad[3];
211} __attribute__ ((packed));
212
213/* SCAN parameters */
214#define SCAN_MAX_NUM_OF_CHANNELS 16
215
216struct cmd_scan {
217	struct wl12xx_cmd_header header;
218
219	struct basic_scan_parameters params;
220	struct basic_scan_channel_parameters channels[SCAN_MAX_NUM_OF_CHANNELS];
221} __attribute__ ((packed));
222
223enum {
224	BSS_TYPE_IBSS = 0,
225	BSS_TYPE_STA_BSS = 2,
226	BSS_TYPE_AP_BSS = 3,
227	MAX_BSS_TYPE = 0xFF
228};
229
230#define JOIN_CMD_CTRL_TX_FLUSH             0x80 /* Firmware flushes all Tx */
231#define JOIN_CMD_CTRL_EARLY_WAKEUP_ENABLE  0x01 /* Early wakeup time */
232
233
234struct cmd_join {
235	struct wl12xx_cmd_header header;
236
237	u32 bssid_lsb;
238	u16 bssid_msb;
239	u16 beacon_interval; /* in TBTTs */
240	u32 rx_config_options;
241	u32 rx_filter_options;
242
243	/*
244	 * The target uses this field to determine the rate at
245	 * which to transmit control frame responses (such as
246	 * ACK or CTS frames).
247	 */
248	u16 basic_rate_set;
249	u8 dtim_interval;
250	u8 tx_ctrl_frame_rate; /* OBSOLETE */
251	u8 tx_ctrl_frame_mod;  /* OBSOLETE */
252	/*
253	 * bits 0-2: This bitwise field specifies the type
254	 * of BSS to start or join (BSS_TYPE_*).
255	 * bit 4: Band - The radio band in which to join
256	 * or start.
257	 *  0 - 2.4GHz band
258	 *  1 - 5GHz band
259	 * bits 3, 5-7: Reserved
260	 */
261	u8 bss_type;
262	u8 channel;
263	u8 ssid_len;
264	u8 ssid[IW_ESSID_MAX_SIZE];
265	u8 ctrl; /* JOIN_CMD_CTRL_* */
266	u8 tx_mgt_frame_rate; /* OBSOLETE */
267	u8 tx_mgt_frame_mod;  /* OBSOLETE */
268	u8 reserved;
269} __attribute__ ((packed));
270
271struct cmd_enabledisable_path {
272	struct wl12xx_cmd_header header;
273
274	u8 channel;
275	u8 padding[3];
276} __attribute__ ((packed));
277
278#define WL12XX_MAX_TEMPLATE_SIZE 300
279
280struct wl12xx_cmd_packet_template {
281	struct wl12xx_cmd_header header;
282
283	__le16 size;
284	u8 data[0];
285} __attribute__ ((packed));
286
287#define TIM_ELE_ID    5
288#define PARTIAL_VBM_MAX    251
289
290struct wl12xx_tim {
291	u8 identity;
292	u8 length;
293	u8 dtim_count;
294	u8 dtim_period;
295	u8 bitmap_ctrl;
296	u8 pvb_field[PARTIAL_VBM_MAX]; /* Partial Virtual Bitmap */
297} __attribute__ ((packed));
298
299/* Virtual Bit Map update */
300struct wl12xx_cmd_vbm_update {
301	struct wl12xx_cmd_header header;
302	__le16 len;
303	u8  padding[2];
304	struct wl12xx_tim tim;
305} __attribute__ ((packed));
306
307enum wl12xx_cmd_ps_mode {
308	STATION_ACTIVE_MODE,
309	STATION_POWER_SAVE_MODE
310};
311
312struct wl12xx_cmd_ps_params {
313	struct wl12xx_cmd_header header;
314
315	u8 ps_mode; /* STATION_* */
316	u8 send_null_data; /* Do we have to send NULL data packet ? */
317	u8 retries; /* Number of retires for the initial NULL data packet */
318
319	 /*
320	  * TUs during which the target stays awake after switching
321	  * to power save mode.
322	  */
323	u8 hang_over_period;
324	u16 null_data_rate;
325	u8 pad[2];
326} __attribute__ ((packed));
327
328struct wl12xx_cmd_trigger_scan_to {
329	struct wl12xx_cmd_header header;
330
331	u32 timeout;
332};
333
334/* HW encryption keys */
335#define NUM_ACCESS_CATEGORIES_COPY 4
336#define MAX_KEY_SIZE 32
337
338/* When set, disable HW encryption */
339#define DF_ENCRYPTION_DISABLE      0x01
340/* When set, disable HW decryption */
341#define DF_SNIFF_MODE_ENABLE       0x80
342
343enum wl12xx_cmd_key_action {
344	KEY_ADD_OR_REPLACE = 1,
345	KEY_REMOVE         = 2,
346	KEY_SET_ID         = 3,
347	MAX_KEY_ACTION     = 0xffff,
348};
349
350enum wl12xx_cmd_key_type {
351	KEY_WEP_DEFAULT       = 0,
352	KEY_WEP_ADDR          = 1,
353	KEY_AES_GROUP         = 4,
354	KEY_AES_PAIRWISE      = 5,
355	KEY_WEP_GROUP         = 6,
356	KEY_TKIP_MIC_GROUP    = 10,
357	KEY_TKIP_MIC_PAIRWISE = 11,
358};
359
360/*
361 *
362 * key_type_e   key size    key format
363 * ----------   ---------   ----------
364 * 0x00         5, 13, 29   Key data
365 * 0x01         5, 13, 29   Key data
366 * 0x04         16          16 bytes of key data
367 * 0x05         16          16 bytes of key data
368 * 0x0a         32          16 bytes of TKIP key data
369 *                          8 bytes of RX MIC key data
370 *                          8 bytes of TX MIC key data
371 * 0x0b         32          16 bytes of TKIP key data
372 *                          8 bytes of RX MIC key data
373 *                          8 bytes of TX MIC key data
374 *
375 */
376
377struct wl12xx_cmd_set_keys {
378	struct wl12xx_cmd_header header;
379
380	/* Ignored for default WEP key */
381	u8 addr[ETH_ALEN];
382
383	/* key_action_e */
384	u16 key_action;
385
386	u16 reserved_1;
387
388	/* key size in bytes */
389	u8 key_size;
390
391	/* key_type_e */
392	u8 key_type;
393	u8 ssid_profile;
394
395	/*
396	 * TKIP, AES: frame's key id field.
397	 * For WEP default key: key id;
398	 */
399	u8 id;
400	u8 reserved_2[6];
401	u8 key[MAX_KEY_SIZE];
402	u16 ac_seq_num16[NUM_ACCESS_CATEGORIES_COPY];
403	u32 ac_seq_num32[NUM_ACCESS_CATEGORIES_COPY];
404} __attribute__ ((packed));
405
406
407#endif /* __WL12XX_CMD_H__ */
408