aic79xx.h revision a76106afbeb0c7d50762e7e5239496e5f7a0a074
1/* 2 * Core definitions and data structures shareable across OS platforms. 3 * 4 * Copyright (c) 1994-2002 Justin T. Gibbs. 5 * Copyright (c) 2000-2002 Adaptec Inc. 6 * All rights reserved. 7 * 8 * Redistribution and use in source and binary forms, with or without 9 * modification, are permitted provided that the following conditions 10 * are met: 11 * 1. Redistributions of source code must retain the above copyright 12 * notice, this list of conditions, and the following disclaimer, 13 * without modification. 14 * 2. Redistributions in binary form must reproduce at minimum a disclaimer 15 * substantially similar to the "NO WARRANTY" disclaimer below 16 * ("Disclaimer") and any redistribution must be conditioned upon 17 * including a substantially similar Disclaimer requirement for further 18 * binary redistribution. 19 * 3. Neither the names of the above-listed copyright holders nor the names 20 * of any contributors may be used to endorse or promote products derived 21 * from this software without specific prior written permission. 22 * 23 * Alternatively, this software may be distributed under the terms of the 24 * GNU General Public License ("GPL") version 2 as published by the Free 25 * Software Foundation. 26 * 27 * NO WARRANTY 28 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 29 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT 30 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR 31 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT 32 * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 33 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 34 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 35 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, 36 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING 37 * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE 38 * POSSIBILITY OF SUCH DAMAGES. 39 * 40 * $Id: //depot/aic7xxx/aic7xxx/aic79xx.h#109 $ 41 * 42 * $FreeBSD$ 43 */ 44 45#ifndef _AIC79XX_H_ 46#define _AIC79XX_H_ 47 48/* Register Definitions */ 49#include "aic79xx_reg.h" 50 51/************************* Forward Declarations *******************************/ 52struct ahd_platform_data; 53struct scb_platform_data; 54 55/****************************** Useful Macros *********************************/ 56#ifndef TRUE 57#define TRUE 1 58#endif 59#ifndef FALSE 60#define FALSE 0 61#endif 62 63#define ALL_CHANNELS '\0' 64#define ALL_TARGETS_MASK 0xFFFF 65#define INITIATOR_WILDCARD (~0) 66#define SCB_LIST_NULL 0xFF00 67#define SCB_LIST_NULL_LE (ahd_htole16(SCB_LIST_NULL)) 68#define QOUTFIFO_ENTRY_VALID 0x80 69#define SCBID_IS_NULL(scbid) (((scbid) & 0xFF00 ) == SCB_LIST_NULL) 70 71#define SCSIID_TARGET(ahd, scsiid) \ 72 (((scsiid) & TID) >> TID_SHIFT) 73#define SCSIID_OUR_ID(scsiid) \ 74 ((scsiid) & OID) 75#define SCSIID_CHANNEL(ahd, scsiid) ('A') 76#define SCB_IS_SCSIBUS_B(ahd, scb) (0) 77#define SCB_GET_OUR_ID(scb) \ 78 SCSIID_OUR_ID((scb)->hscb->scsiid) 79#define SCB_GET_TARGET(ahd, scb) \ 80 SCSIID_TARGET((ahd), (scb)->hscb->scsiid) 81#define SCB_GET_CHANNEL(ahd, scb) \ 82 SCSIID_CHANNEL(ahd, (scb)->hscb->scsiid) 83#define SCB_GET_LUN(scb) \ 84 ((scb)->hscb->lun) 85#define SCB_GET_TARGET_OFFSET(ahd, scb) \ 86 SCB_GET_TARGET(ahd, scb) 87#define SCB_GET_TARGET_MASK(ahd, scb) \ 88 (0x01 << (SCB_GET_TARGET_OFFSET(ahd, scb))) 89#ifdef AHD_DEBUG 90#define SCB_IS_SILENT(scb) \ 91 ((ahd_debug & AHD_SHOW_MASKED_ERRORS) == 0 \ 92 && (((scb)->flags & SCB_SILENT) != 0)) 93#else 94#define SCB_IS_SILENT(scb) \ 95 (((scb)->flags & SCB_SILENT) != 0) 96#endif 97/* 98 * TCLs have the following format: TTTTLLLLLLLL 99 */ 100#define TCL_TARGET_OFFSET(tcl) \ 101 ((((tcl) >> 4) & TID) >> 4) 102#define TCL_LUN(tcl) \ 103 (tcl & (AHD_NUM_LUNS - 1)) 104#define BUILD_TCL(scsiid, lun) \ 105 ((lun) | (((scsiid) & TID) << 4)) 106#define BUILD_TCL_RAW(target, channel, lun) \ 107 ((lun) | ((target) << 8)) 108 109#define SCB_GET_TAG(scb) \ 110 ahd_le16toh(scb->hscb->tag) 111 112#ifndef AHD_TARGET_MODE 113#undef AHD_TMODE_ENABLE 114#define AHD_TMODE_ENABLE 0 115#endif 116 117#define AHD_BUILD_COL_IDX(target, lun) \ 118 (((lun) << 4) | target) 119 120#define AHD_GET_SCB_COL_IDX(ahd, scb) \ 121 ((SCB_GET_LUN(scb) << 4) | SCB_GET_TARGET(ahd, scb)) 122 123#define AHD_SET_SCB_COL_IDX(scb, col_idx) \ 124do { \ 125 (scb)->hscb->scsiid = ((col_idx) << TID_SHIFT) & TID; \ 126 (scb)->hscb->lun = ((col_idx) >> 4) & (AHD_NUM_LUNS_NONPKT-1); \ 127} while (0) 128 129#define AHD_COPY_SCB_COL_IDX(dst, src) \ 130do { \ 131 dst->hscb->scsiid = src->hscb->scsiid; \ 132 dst->hscb->lun = src->hscb->lun; \ 133} while (0) 134 135#define AHD_NEVER_COL_IDX 0xFFFF 136 137/**************************** Driver Constants ********************************/ 138/* 139 * The maximum number of supported targets. 140 */ 141#define AHD_NUM_TARGETS 16 142 143/* 144 * The maximum number of supported luns. 145 * The identify message only supports 64 luns in non-packetized transfers. 146 * You can have 2^64 luns when information unit transfers are enabled, 147 * but until we see a need to support that many, we support 256. 148 */ 149#define AHD_NUM_LUNS_NONPKT 64 150#define AHD_NUM_LUNS 256 151 152/* 153 * The maximum transfer per S/G segment. 154 */ 155#define AHD_MAXTRANSFER_SIZE 0x00ffffff /* limited by 24bit counter */ 156 157/* 158 * The maximum amount of SCB storage in hardware on a controller. 159 * This value represents an upper bound. Due to software design, 160 * we may not be able to use this number. 161 */ 162#define AHD_SCB_MAX 512 163 164/* 165 * The maximum number of concurrent transactions supported per driver instance. 166 * Sequencer Control Blocks (SCBs) store per-transaction information. 167 */ 168#define AHD_MAX_QUEUE AHD_SCB_MAX 169 170/* 171 * Define the size of our QIN and QOUT FIFOs. They must be a power of 2 172 * in size and accommodate as many transactions as can be queued concurrently. 173 */ 174#define AHD_QIN_SIZE AHD_MAX_QUEUE 175#define AHD_QOUT_SIZE AHD_MAX_QUEUE 176 177#define AHD_QIN_WRAP(x) ((x) & (AHD_QIN_SIZE-1)) 178/* 179 * The maximum amount of SCB storage we allocate in host memory. 180 */ 181#define AHD_SCB_MAX_ALLOC AHD_MAX_QUEUE 182 183/* 184 * Ring Buffer of incoming target commands. 185 * We allocate 256 to simplify the logic in the sequencer 186 * by using the natural wrap point of an 8bit counter. 187 */ 188#define AHD_TMODE_CMDS 256 189 190/* Reset line assertion time in us */ 191#define AHD_BUSRESET_DELAY 25 192 193/******************* Chip Characteristics/Operating Settings *****************/ 194/* 195 * Chip Type 196 * The chip order is from least sophisticated to most sophisticated. 197 */ 198typedef enum { 199 AHD_NONE = 0x0000, 200 AHD_CHIPID_MASK = 0x00FF, 201 AHD_AIC7901 = 0x0001, 202 AHD_AIC7902 = 0x0002, 203 AHD_AIC7901A = 0x0003, 204 AHD_PCI = 0x0100, /* Bus type PCI */ 205 AHD_PCIX = 0x0200, /* Bus type PCIX */ 206 AHD_BUS_MASK = 0x0F00 207} ahd_chip; 208 209/* 210 * Features available in each chip type. 211 */ 212typedef enum { 213 AHD_FENONE = 0x00000, 214 AHD_WIDE = 0x00001,/* Wide Channel */ 215 AHD_AIC79XXB_SLOWCRC = 0x00002,/* SLOWCRC bit should be set */ 216 AHD_MULTI_FUNC = 0x00100,/* Multi-Function/Channel Device */ 217 AHD_TARGETMODE = 0x01000,/* Has tested target mode support */ 218 AHD_MULTIROLE = 0x02000,/* Space for two roles at a time */ 219 AHD_RTI = 0x04000,/* Retained Training Support */ 220 AHD_NEW_IOCELL_OPTS = 0x08000,/* More Signal knobs in the IOCELL */ 221 AHD_NEW_DFCNTRL_OPTS = 0x10000,/* SCSIENWRDIS bit */ 222 AHD_FAST_CDB_DELIVERY = 0x20000,/* CDB acks released to Output Sync */ 223 AHD_REMOVABLE = 0x00000,/* Hot-Swap supported - None so far*/ 224 AHD_AIC7901_FE = AHD_FENONE, 225 AHD_AIC7901A_FE = AHD_FENONE, 226 AHD_AIC7902_FE = AHD_MULTI_FUNC 227} ahd_feature; 228 229/* 230 * Bugs in the silicon that we work around in software. 231 */ 232typedef enum { 233 AHD_BUGNONE = 0x0000, 234 /* 235 * Rev A hardware fails to update LAST/CURR/NEXTSCB 236 * correctly in certain packetized selection cases. 237 */ 238 AHD_SENT_SCB_UPDATE_BUG = 0x0001, 239 /* The wrong SCB is accessed to check the abort pending bit. */ 240 AHD_ABORT_LQI_BUG = 0x0002, 241 /* Packetized bitbucket crosses packet boundaries. */ 242 AHD_PKT_BITBUCKET_BUG = 0x0004, 243 /* The selection timer runs twice as long as its setting. */ 244 AHD_LONG_SETIMO_BUG = 0x0008, 245 /* The Non-LQ CRC error status is delayed until phase change. */ 246 AHD_NLQICRC_DELAYED_BUG = 0x0010, 247 /* The chip must be reset for all outgoing bus resets. */ 248 AHD_SCSIRST_BUG = 0x0020, 249 /* Some PCIX fields must be saved and restored across chip reset. */ 250 AHD_PCIX_CHIPRST_BUG = 0x0040, 251 /* MMAPIO is not functional in PCI-X mode. */ 252 AHD_PCIX_MMAPIO_BUG = 0x0080, 253 /* Reads to SCBRAM fail to reset the discard timer. */ 254 AHD_PCIX_SCBRAM_RD_BUG = 0x0100, 255 /* Bug workarounds that can be disabled on non-PCIX busses. */ 256 AHD_PCIX_BUG_MASK = AHD_PCIX_CHIPRST_BUG 257 | AHD_PCIX_MMAPIO_BUG 258 | AHD_PCIX_SCBRAM_RD_BUG, 259 /* 260 * LQOSTOP0 status set even for forced selections with ATN 261 * to perform non-packetized message delivery. 262 */ 263 AHD_LQO_ATNO_BUG = 0x0200, 264 /* FIFO auto-flush does not always trigger. */ 265 AHD_AUTOFLUSH_BUG = 0x0400, 266 /* The CLRLQO registers are not self-clearing. */ 267 AHD_CLRLQO_AUTOCLR_BUG = 0x0800, 268 /* The PACKETIZED status bit refers to the previous connection. */ 269 AHD_PKTIZED_STATUS_BUG = 0x1000, 270 /* "Short Luns" are not placed into outgoing LQ packets correctly. */ 271 AHD_PKT_LUN_BUG = 0x2000, 272 /* 273 * Only the FIFO allocated to the non-packetized connection may 274 * be in use during a non-packetzied connection. 275 */ 276 AHD_NONPACKFIFO_BUG = 0x4000, 277 /* 278 * Writing to a DFF SCBPTR register may fail if concurent with 279 * a hardware write to the other DFF SCBPTR register. This is 280 * not currently a concern in our sequencer since all chips with 281 * this bug have the AHD_NONPACKFIFO_BUG and all writes of concern 282 * occur in non-packetized connections. 283 */ 284 AHD_MDFF_WSCBPTR_BUG = 0x8000, 285 /* SGHADDR updates are slow. */ 286 AHD_REG_SLOW_SETTLE_BUG = 0x10000, 287 /* 288 * Changing the MODE_PTR coincident with an interrupt that 289 * switches to a different mode will cause the interrupt to 290 * be in the mode written outside of interrupt context. 291 */ 292 AHD_SET_MODE_BUG = 0x20000, 293 /* Non-packetized busfree revision does not work. */ 294 AHD_BUSFREEREV_BUG = 0x40000, 295 /* 296 * Paced transfers are indicated with a non-standard PPR 297 * option bit in the neg table, 160MHz is indicated by 298 * sync factor 0x7, and the offset if off by a factor of 2. 299 */ 300 AHD_PACED_NEGTABLE_BUG = 0x80000, 301 /* LQOOVERRUN false positives. */ 302 AHD_LQOOVERRUN_BUG = 0x100000, 303 /* 304 * Controller write to INTSTAT will lose to a host 305 * write to CLRINT. 306 */ 307 AHD_INTCOLLISION_BUG = 0x200000, 308 /* 309 * The GEM318 violates the SCSI spec by not waiting 310 * the mandated bus settle delay between phase changes 311 * in some situations. Some aic79xx chip revs. are more 312 * strict in this regard and will treat REQ assertions 313 * that fall within the bus settle delay window as 314 * glitches. This flag tells the firmware to tolerate 315 * early REQ assertions. 316 */ 317 AHD_EARLY_REQ_BUG = 0x400000, 318 /* 319 * The LED does not stay on long enough in packetized modes. 320 */ 321 AHD_FAINT_LED_BUG = 0x800000 322} ahd_bug; 323 324/* 325 * Configuration specific settings. 326 * The driver determines these settings by probing the 327 * chip/controller's configuration. 328 */ 329typedef enum { 330 AHD_FNONE = 0x00000, 331 AHD_BOOT_CHANNEL = 0x00001,/* We were set as the boot channel. */ 332 AHD_USEDEFAULTS = 0x00004,/* 333 * For cards without an seeprom 334 * or a BIOS to initialize the chip's 335 * SRAM, we use the default target 336 * settings. 337 */ 338 AHD_SEQUENCER_DEBUG = 0x00008, 339 AHD_RESET_BUS_A = 0x00010, 340 AHD_EXTENDED_TRANS_A = 0x00020, 341 AHD_TERM_ENB_A = 0x00040, 342 AHD_SPCHK_ENB_A = 0x00080, 343 AHD_STPWLEVEL_A = 0x00100, 344 AHD_INITIATORROLE = 0x00200,/* 345 * Allow initiator operations on 346 * this controller. 347 */ 348 AHD_TARGETROLE = 0x00400,/* 349 * Allow target operations on this 350 * controller. 351 */ 352 AHD_RESOURCE_SHORTAGE = 0x00800, 353 AHD_TQINFIFO_BLOCKED = 0x01000,/* Blocked waiting for ATIOs */ 354 AHD_INT50_SPEEDFLEX = 0x02000,/* 355 * Internal 50pin connector 356 * sits behind an aic3860 357 */ 358 AHD_BIOS_ENABLED = 0x04000, 359 AHD_ALL_INTERRUPTS = 0x08000, 360 AHD_39BIT_ADDRESSING = 0x10000,/* Use 39 bit addressing scheme. */ 361 AHD_64BIT_ADDRESSING = 0x20000,/* Use 64 bit addressing scheme. */ 362 AHD_CURRENT_SENSING = 0x40000, 363 AHD_SCB_CONFIG_USED = 0x80000,/* No SEEPROM but SCB had info. */ 364 AHD_HP_BOARD = 0x100000, 365 AHD_BUS_RESET_ACTIVE = 0x200000, 366 AHD_UPDATE_PEND_CMDS = 0x400000, 367 AHD_RUNNING_QOUTFIFO = 0x800000, 368 AHD_HAD_FIRST_SEL = 0x1000000 369} ahd_flag; 370 371/************************* Hardware SCB Definition ***************************/ 372 373/* 374 * The driver keeps up to MAX_SCB scb structures per card in memory. The SCB 375 * consists of a "hardware SCB" mirroring the fields available on the card 376 * and additional information the kernel stores for each transaction. 377 * 378 * To minimize space utilization, a portion of the hardware scb stores 379 * different data during different portions of a SCSI transaction. 380 * As initialized by the host driver for the initiator role, this area 381 * contains the SCSI cdb (or a pointer to the cdb) to be executed. After 382 * the cdb has been presented to the target, this area serves to store 383 * residual transfer information and the SCSI status byte. 384 * For the target role, the contents of this area do not change, but 385 * still serve a different purpose than for the initiator role. See 386 * struct target_data for details. 387 */ 388 389/* 390 * Status information embedded in the shared poriton of 391 * an SCB after passing the cdb to the target. The kernel 392 * driver will only read this data for transactions that 393 * complete abnormally. 394 */ 395struct initiator_status { 396 uint32_t residual_datacnt; /* Residual in the current S/G seg */ 397 uint32_t residual_sgptr; /* The next S/G for this transfer */ 398 uint8_t scsi_status; /* Standard SCSI status byte */ 399}; 400 401struct target_status { 402 uint32_t residual_datacnt; /* Residual in the current S/G seg */ 403 uint32_t residual_sgptr; /* The next S/G for this transfer */ 404 uint8_t scsi_status; /* SCSI status to give to initiator */ 405 uint8_t target_phases; /* Bitmap of phases to execute */ 406 uint8_t data_phase; /* Data-In or Data-Out */ 407 uint8_t initiator_tag; /* Initiator's transaction tag */ 408}; 409 410/* 411 * Initiator mode SCB shared data area. 412 * If the embedded CDB is 12 bytes or less, we embed 413 * the sense buffer address in the SCB. This allows 414 * us to retrieve sense information without interrupting 415 * the host in packetized mode. 416 */ 417typedef uint32_t sense_addr_t; 418#define MAX_CDB_LEN 16 419#define MAX_CDB_LEN_WITH_SENSE_ADDR (MAX_CDB_LEN - sizeof(sense_addr_t)) 420union initiator_data { 421 struct { 422 uint64_t cdbptr; 423 uint8_t cdblen; 424 } cdb_from_host; 425 uint8_t cdb[MAX_CDB_LEN]; 426 struct { 427 uint8_t cdb[MAX_CDB_LEN_WITH_SENSE_ADDR]; 428 sense_addr_t sense_addr; 429 } cdb_plus_saddr; 430}; 431 432/* 433 * Target mode version of the shared data SCB segment. 434 */ 435struct target_data { 436 uint32_t spare[2]; 437 uint8_t scsi_status; /* SCSI status to give to initiator */ 438 uint8_t target_phases; /* Bitmap of phases to execute */ 439 uint8_t data_phase; /* Data-In or Data-Out */ 440 uint8_t initiator_tag; /* Initiator's transaction tag */ 441}; 442 443struct hardware_scb { 444/*0*/ union { 445 union initiator_data idata; 446 struct target_data tdata; 447 struct initiator_status istatus; 448 struct target_status tstatus; 449 } shared_data; 450/* 451 * A word about residuals. 452 * The scb is presented to the sequencer with the dataptr and datacnt 453 * fields initialized to the contents of the first S/G element to 454 * transfer. The sgptr field is initialized to the bus address for 455 * the S/G element that follows the first in the in core S/G array 456 * or'ed with the SG_FULL_RESID flag. Sgptr may point to an invalid 457 * S/G entry for this transfer (single S/G element transfer with the 458 * first elements address and length preloaded in the dataptr/datacnt 459 * fields). If no transfer is to occur, sgptr is set to SG_LIST_NULL. 460 * The SG_FULL_RESID flag ensures that the residual will be correctly 461 * noted even if no data transfers occur. Once the data phase is entered, 462 * the residual sgptr and datacnt are loaded from the sgptr and the 463 * datacnt fields. After each S/G element's dataptr and length are 464 * loaded into the hardware, the residual sgptr is advanced. After 465 * each S/G element is expired, its datacnt field is checked to see 466 * if the LAST_SEG flag is set. If so, SG_LIST_NULL is set in the 467 * residual sg ptr and the transfer is considered complete. If the 468 * sequencer determines that there is a residual in the tranfer, or 469 * there is non-zero status, it will set the SG_STATUS_VALID flag in 470 * sgptr and dma the scb back into host memory. To sumarize: 471 * 472 * Sequencer: 473 * o A residual has occurred if SG_FULL_RESID is set in sgptr, 474 * or residual_sgptr does not have SG_LIST_NULL set. 475 * 476 * o We are transfering the last segment if residual_datacnt has 477 * the SG_LAST_SEG flag set. 478 * 479 * Host: 480 * o A residual can only have occurred if a completed scb has the 481 * SG_STATUS_VALID flag set. Inspection of the SCSI status field, 482 * the residual_datacnt, and the residual_sgptr field will tell 483 * for sure. 484 * 485 * o residual_sgptr and sgptr refer to the "next" sg entry 486 * and so may point beyond the last valid sg entry for the 487 * transfer. 488 */ 489#define SG_PTR_MASK 0xFFFFFFF8 490/*16*/ uint16_t tag; /* Reused by Sequencer. */ 491/*18*/ uint8_t control; /* See SCB_CONTROL in aic79xx.reg for details */ 492/*19*/ uint8_t scsiid; /* 493 * Selection out Id 494 * Our Id (bits 0-3) Their ID (bits 4-7) 495 */ 496/*20*/ uint8_t lun; 497/*21*/ uint8_t task_attribute; 498/*22*/ uint8_t cdb_len; 499/*23*/ uint8_t task_management; 500/*24*/ uint64_t dataptr; 501/*32*/ uint32_t datacnt; /* Byte 3 is spare. */ 502/*36*/ uint32_t sgptr; 503/*40*/ uint32_t hscb_busaddr; 504/*44*/ uint32_t next_hscb_busaddr; 505/********** Long lun field only downloaded for full 8 byte lun support ********/ 506/*48*/ uint8_t pkt_long_lun[8]; 507/******* Fields below are not Downloaded (Sequencer may use for scratch) ******/ 508/*56*/ uint8_t spare[8]; 509}; 510 511/************************ Kernel SCB Definitions ******************************/ 512/* 513 * Some fields of the SCB are OS dependent. Here we collect the 514 * definitions for elements that all OS platforms need to include 515 * in there SCB definition. 516 */ 517 518/* 519 * Definition of a scatter/gather element as transfered to the controller. 520 * The aic7xxx chips only support a 24bit length. We use the top byte of 521 * the length to store additional address bits and a flag to indicate 522 * that a given segment terminates the transfer. This gives us an 523 * addressable range of 512GB on machines with 64bit PCI or with chips 524 * that can support dual address cycles on 32bit PCI busses. 525 */ 526struct ahd_dma_seg { 527 uint32_t addr; 528 uint32_t len; 529#define AHD_DMA_LAST_SEG 0x80000000 530#define AHD_SG_HIGH_ADDR_MASK 0x7F000000 531#define AHD_SG_LEN_MASK 0x00FFFFFF 532}; 533 534struct ahd_dma64_seg { 535 uint64_t addr; 536 uint32_t len; 537 uint32_t pad; 538}; 539 540struct map_node { 541 bus_dmamap_t dmamap; 542 dma_addr_t physaddr; 543 uint8_t *vaddr; 544 SLIST_ENTRY(map_node) links; 545}; 546 547/* 548 * The current state of this SCB. 549 */ 550typedef enum { 551 SCB_FLAG_NONE = 0x00000, 552 SCB_TRANSMISSION_ERROR = 0x00001,/* 553 * We detected a parity or CRC 554 * error that has effected the 555 * payload of the command. This 556 * flag is checked when normal 557 * status is returned to catch 558 * the case of a target not 559 * responding to our attempt 560 * to report the error. 561 */ 562 SCB_OTHERTCL_TIMEOUT = 0x00002,/* 563 * Another device was active 564 * during the first timeout for 565 * this SCB so we gave ourselves 566 * an additional timeout period 567 * in case it was hogging the 568 * bus. 569 */ 570 SCB_DEVICE_RESET = 0x00004, 571 SCB_SENSE = 0x00008, 572 SCB_CDB32_PTR = 0x00010, 573 SCB_RECOVERY_SCB = 0x00020, 574 SCB_AUTO_NEGOTIATE = 0x00040,/* Negotiate to achieve goal. */ 575 SCB_NEGOTIATE = 0x00080,/* Negotiation forced for command. */ 576 SCB_ABORT = 0x00100, 577 SCB_ACTIVE = 0x00200, 578 SCB_TARGET_IMMEDIATE = 0x00400, 579 SCB_PACKETIZED = 0x00800, 580 SCB_EXPECT_PPR_BUSFREE = 0x01000, 581 SCB_PKT_SENSE = 0x02000, 582 SCB_EXTERNAL_RESET = 0x04000,/* Device was reset externally */ 583 SCB_ON_COL_LIST = 0x08000, 584 SCB_SILENT = 0x10000 /* 585 * Be quiet about transmission type 586 * errors. They are expected and we 587 * don't want to upset the user. This 588 * flag is typically used during DV. 589 */ 590} scb_flag; 591 592struct scb { 593 struct hardware_scb *hscb; 594 union { 595 SLIST_ENTRY(scb) sle; 596 LIST_ENTRY(scb) le; 597 TAILQ_ENTRY(scb) tqe; 598 } links; 599 union { 600 SLIST_ENTRY(scb) sle; 601 LIST_ENTRY(scb) le; 602 TAILQ_ENTRY(scb) tqe; 603 } links2; 604#define pending_links links2.le 605#define collision_links links2.le 606 struct scb *col_scb; 607 ahd_io_ctx_t io_ctx; 608 struct ahd_softc *ahd_softc; 609 scb_flag flags; 610#ifndef __linux__ 611 bus_dmamap_t dmamap; 612#endif 613 struct scb_platform_data *platform_data; 614 struct map_node *hscb_map; 615 struct map_node *sg_map; 616 struct map_node *sense_map; 617 void *sg_list; 618 uint8_t *sense_data; 619 dma_addr_t sg_list_busaddr; 620 dma_addr_t sense_busaddr; 621 u_int sg_count;/* How full ahd_dma_seg is */ 622#define AHD_MAX_LQ_CRC_ERRORS 5 623 u_int crc_retry_count; 624}; 625 626TAILQ_HEAD(scb_tailq, scb); 627LIST_HEAD(scb_list, scb); 628 629struct scb_data { 630 /* 631 * TAILQ of lists of free SCBs grouped by device 632 * collision domains. 633 */ 634 struct scb_tailq free_scbs; 635 636 /* 637 * Per-device lists of SCBs whose tag ID would collide 638 * with an already active tag on the device. 639 */ 640 struct scb_list free_scb_lists[AHD_NUM_TARGETS * AHD_NUM_LUNS_NONPKT]; 641 642 /* 643 * SCBs that will not collide with any active device. 644 */ 645 struct scb_list any_dev_free_scb_list; 646 647 /* 648 * Mapping from tag to SCB. 649 */ 650 struct scb *scbindex[AHD_SCB_MAX]; 651 652 /* 653 * "Bus" addresses of our data structures. 654 */ 655 bus_dma_tag_t hscb_dmat; /* dmat for our hardware SCB array */ 656 bus_dma_tag_t sg_dmat; /* dmat for our sg segments */ 657 bus_dma_tag_t sense_dmat; /* dmat for our sense buffers */ 658 SLIST_HEAD(, map_node) hscb_maps; 659 SLIST_HEAD(, map_node) sg_maps; 660 SLIST_HEAD(, map_node) sense_maps; 661 int scbs_left; /* unallocated scbs in head map_node */ 662 int sgs_left; /* unallocated sgs in head map_node */ 663 int sense_left; /* unallocated sense in head map_node */ 664 uint16_t numscbs; 665 uint16_t maxhscbs; /* Number of SCBs on the card */ 666 uint8_t init_level; /* 667 * How far we've initialized 668 * this structure. 669 */ 670}; 671 672/************************ Target Mode Definitions *****************************/ 673 674/* 675 * Connection desciptor for select-in requests in target mode. 676 */ 677struct target_cmd { 678 uint8_t scsiid; /* Our ID and the initiator's ID */ 679 uint8_t identify; /* Identify message */ 680 uint8_t bytes[22]; /* 681 * Bytes contains any additional message 682 * bytes terminated by 0xFF. The remainder 683 * is the cdb to execute. 684 */ 685 uint8_t cmd_valid; /* 686 * When a command is complete, the firmware 687 * will set cmd_valid to all bits set. 688 * After the host has seen the command, 689 * the bits are cleared. This allows us 690 * to just peek at host memory to determine 691 * if more work is complete. cmd_valid is on 692 * an 8 byte boundary to simplify setting 693 * it on aic7880 hardware which only has 694 * limited direct access to the DMA FIFO. 695 */ 696 uint8_t pad[7]; 697}; 698 699/* 700 * Number of events we can buffer up if we run out 701 * of immediate notify ccbs. 702 */ 703#define AHD_TMODE_EVENT_BUFFER_SIZE 8 704struct ahd_tmode_event { 705 uint8_t initiator_id; 706 uint8_t event_type; /* MSG type or EVENT_TYPE_BUS_RESET */ 707#define EVENT_TYPE_BUS_RESET 0xFF 708 uint8_t event_arg; 709}; 710 711/* 712 * Per enabled lun target mode state. 713 * As this state is directly influenced by the host OS'es target mode 714 * environment, we let the OS module define it. Forward declare the 715 * structure here so we can store arrays of them, etc. in OS neutral 716 * data structures. 717 */ 718#ifdef AHD_TARGET_MODE 719struct ahd_tmode_lstate { 720 struct cam_path *path; 721 struct ccb_hdr_slist accept_tios; 722 struct ccb_hdr_slist immed_notifies; 723 struct ahd_tmode_event event_buffer[AHD_TMODE_EVENT_BUFFER_SIZE]; 724 uint8_t event_r_idx; 725 uint8_t event_w_idx; 726}; 727#else 728struct ahd_tmode_lstate; 729#endif 730 731/******************** Transfer Negotiation Datastructures *********************/ 732#define AHD_TRANS_CUR 0x01 /* Modify current neogtiation status */ 733#define AHD_TRANS_ACTIVE 0x03 /* Assume this target is on the bus */ 734#define AHD_TRANS_GOAL 0x04 /* Modify negotiation goal */ 735#define AHD_TRANS_USER 0x08 /* Modify user negotiation settings */ 736#define AHD_PERIOD_10MHz 0x19 737 738#define AHD_WIDTH_UNKNOWN 0xFF 739#define AHD_PERIOD_UNKNOWN 0xFF 740#define AHD_OFFSET_UNKNOWN 0xFF 741#define AHD_PPR_OPTS_UNKNOWN 0xFF 742 743/* 744 * Transfer Negotiation Information. 745 */ 746struct ahd_transinfo { 747 uint8_t protocol_version; /* SCSI Revision level */ 748 uint8_t transport_version; /* SPI Revision level */ 749 uint8_t width; /* Bus width */ 750 uint8_t period; /* Sync rate factor */ 751 uint8_t offset; /* Sync offset */ 752 uint8_t ppr_options; /* Parallel Protocol Request options */ 753}; 754 755/* 756 * Per-initiator current, goal and user transfer negotiation information. */ 757struct ahd_initiator_tinfo { 758 struct ahd_transinfo curr; 759 struct ahd_transinfo goal; 760 struct ahd_transinfo user; 761}; 762 763/* 764 * Per enabled target ID state. 765 * Pointers to lun target state as well as sync/wide negotiation information 766 * for each initiator<->target mapping. For the initiator role we pretend 767 * that we are the target and the targets are the initiators since the 768 * negotiation is the same regardless of role. 769 */ 770struct ahd_tmode_tstate { 771 struct ahd_tmode_lstate* enabled_luns[AHD_NUM_LUNS]; 772 struct ahd_initiator_tinfo transinfo[AHD_NUM_TARGETS]; 773 774 /* 775 * Per initiator state bitmasks. 776 */ 777 uint16_t auto_negotiate;/* Auto Negotiation Required */ 778 uint16_t discenable; /* Disconnection allowed */ 779 uint16_t tagenable; /* Tagged Queuing allowed */ 780}; 781 782/* 783 * Points of interest along the negotiated transfer scale. 784 */ 785#define AHD_SYNCRATE_160 0x8 786#define AHD_SYNCRATE_PACED 0x8 787#define AHD_SYNCRATE_DT 0x9 788#define AHD_SYNCRATE_ULTRA2 0xa 789#define AHD_SYNCRATE_ULTRA 0xc 790#define AHD_SYNCRATE_FAST 0x19 791#define AHD_SYNCRATE_MIN_DT AHD_SYNCRATE_FAST 792#define AHD_SYNCRATE_SYNC 0x32 793#define AHD_SYNCRATE_MIN 0x60 794#define AHD_SYNCRATE_ASYNC 0xFF 795#define AHD_SYNCRATE_MAX AHD_SYNCRATE_160 796 797/* Safe and valid period for async negotiations. */ 798#define AHD_ASYNC_XFER_PERIOD 0x44 799 800/* 801 * In RevA, the synctable uses a 120MHz rate for the period 802 * factor 8 and 160MHz for the period factor 7. The 120MHz 803 * rate never made it into the official SCSI spec, so we must 804 * compensate when setting the negotiation table for Rev A 805 * parts. 806 */ 807#define AHD_SYNCRATE_REVA_120 0x8 808#define AHD_SYNCRATE_REVA_160 0x7 809 810/***************************** Lookup Tables **********************************/ 811/* 812 * Phase -> name and message out response 813 * to parity errors in each phase table. 814 */ 815struct ahd_phase_table_entry { 816 uint8_t phase; 817 uint8_t mesg_out; /* Message response to parity errors */ 818 char *phasemsg; 819}; 820 821/************************** Serial EEPROM Format ******************************/ 822 823struct seeprom_config { 824/* 825 * Per SCSI ID Configuration Flags 826 */ 827 uint16_t device_flags[16]; /* words 0-15 */ 828#define CFXFER 0x003F /* synchronous transfer rate */ 829#define CFXFER_ASYNC 0x3F 830#define CFQAS 0x0040 /* Negotiate QAS */ 831#define CFPACKETIZED 0x0080 /* Negotiate Packetized Transfers */ 832#define CFSTART 0x0100 /* send start unit SCSI command */ 833#define CFINCBIOS 0x0200 /* include in BIOS scan */ 834#define CFDISC 0x0400 /* enable disconnection */ 835#define CFMULTILUNDEV 0x0800 /* Probe multiple luns in BIOS scan */ 836#define CFWIDEB 0x1000 /* wide bus device */ 837#define CFHOSTMANAGED 0x8000 /* Managed by a RAID controller */ 838 839/* 840 * BIOS Control Bits 841 */ 842 uint16_t bios_control; /* word 16 */ 843#define CFSUPREM 0x0001 /* support all removeable drives */ 844#define CFSUPREMB 0x0002 /* support removeable boot drives */ 845#define CFBIOSSTATE 0x000C /* BIOS Action State */ 846#define CFBS_DISABLED 0x00 847#define CFBS_ENABLED 0x04 848#define CFBS_DISABLED_SCAN 0x08 849#define CFENABLEDV 0x0010 /* Perform Domain Validation */ 850#define CFCTRL_A 0x0020 /* BIOS displays Ctrl-A message */ 851#define CFSPARITY 0x0040 /* SCSI parity */ 852#define CFEXTEND 0x0080 /* extended translation enabled */ 853#define CFBOOTCD 0x0100 /* Support Bootable CD-ROM */ 854#define CFMSG_LEVEL 0x0600 /* BIOS Message Level */ 855#define CFMSG_VERBOSE 0x0000 856#define CFMSG_SILENT 0x0200 857#define CFMSG_DIAG 0x0400 858#define CFRESETB 0x0800 /* reset SCSI bus at boot */ 859/* UNUSED 0xf000 */ 860 861/* 862 * Host Adapter Control Bits 863 */ 864 uint16_t adapter_control; /* word 17 */ 865#define CFAUTOTERM 0x0001 /* Perform Auto termination */ 866#define CFSTERM 0x0002 /* SCSI low byte termination */ 867#define CFWSTERM 0x0004 /* SCSI high byte termination */ 868#define CFSEAUTOTERM 0x0008 /* Ultra2 Perform secondary Auto Term*/ 869#define CFSELOWTERM 0x0010 /* Ultra2 secondary low term */ 870#define CFSEHIGHTERM 0x0020 /* Ultra2 secondary high term */ 871#define CFSTPWLEVEL 0x0040 /* Termination level control */ 872#define CFBIOSAUTOTERM 0x0080 /* Perform Auto termination */ 873#define CFTERM_MENU 0x0100 /* BIOS displays termination menu */ 874#define CFCLUSTERENB 0x8000 /* Cluster Enable */ 875 876/* 877 * Bus Release Time, Host Adapter ID 878 */ 879 uint16_t brtime_id; /* word 18 */ 880#define CFSCSIID 0x000f /* host adapter SCSI ID */ 881/* UNUSED 0x00f0 */ 882#define CFBRTIME 0xff00 /* bus release time/PCI Latency Time */ 883 884/* 885 * Maximum targets 886 */ 887 uint16_t max_targets; /* word 19 */ 888#define CFMAXTARG 0x00ff /* maximum targets */ 889#define CFBOOTLUN 0x0f00 /* Lun to boot from */ 890#define CFBOOTID 0xf000 /* Target to boot from */ 891 uint16_t res_1[10]; /* words 20-29 */ 892 uint16_t signature; /* BIOS Signature */ 893#define CFSIGNATURE 0x400 894 uint16_t checksum; /* word 31 */ 895}; 896 897/* 898 * Vital Product Data used during POST and by the BIOS. 899 */ 900struct vpd_config { 901 uint8_t bios_flags; 902#define VPDMASTERBIOS 0x0001 903#define VPDBOOTHOST 0x0002 904 uint8_t reserved_1[21]; 905 uint8_t resource_type; 906 uint8_t resource_len[2]; 907 uint8_t resource_data[8]; 908 uint8_t vpd_tag; 909 uint16_t vpd_len; 910 uint8_t vpd_keyword[2]; 911 uint8_t length; 912 uint8_t revision; 913 uint8_t device_flags; 914 uint8_t termnation_menus[2]; 915 uint8_t fifo_threshold; 916 uint8_t end_tag; 917 uint8_t vpd_checksum; 918 uint16_t default_target_flags; 919 uint16_t default_bios_flags; 920 uint16_t default_ctrl_flags; 921 uint8_t default_irq; 922 uint8_t pci_lattime; 923 uint8_t max_target; 924 uint8_t boot_lun; 925 uint16_t signature; 926 uint8_t reserved_2; 927 uint8_t checksum; 928 uint8_t reserved_3[4]; 929}; 930 931/****************************** Flexport Logic ********************************/ 932#define FLXADDR_TERMCTL 0x0 933#define FLX_TERMCTL_ENSECHIGH 0x8 934#define FLX_TERMCTL_ENSECLOW 0x4 935#define FLX_TERMCTL_ENPRIHIGH 0x2 936#define FLX_TERMCTL_ENPRILOW 0x1 937#define FLXADDR_ROMSTAT_CURSENSECTL 0x1 938#define FLX_ROMSTAT_SEECFG 0xF0 939#define FLX_ROMSTAT_EECFG 0x0F 940#define FLX_ROMSTAT_SEE_93C66 0x00 941#define FLX_ROMSTAT_SEE_NONE 0xF0 942#define FLX_ROMSTAT_EE_512x8 0x0 943#define FLX_ROMSTAT_EE_1MBx8 0x1 944#define FLX_ROMSTAT_EE_2MBx8 0x2 945#define FLX_ROMSTAT_EE_4MBx8 0x3 946#define FLX_ROMSTAT_EE_16MBx8 0x4 947#define CURSENSE_ENB 0x1 948#define FLXADDR_FLEXSTAT 0x2 949#define FLX_FSTAT_BUSY 0x1 950#define FLXADDR_CURRENT_STAT 0x4 951#define FLX_CSTAT_SEC_HIGH 0xC0 952#define FLX_CSTAT_SEC_LOW 0x30 953#define FLX_CSTAT_PRI_HIGH 0x0C 954#define FLX_CSTAT_PRI_LOW 0x03 955#define FLX_CSTAT_MASK 0x03 956#define FLX_CSTAT_SHIFT 2 957#define FLX_CSTAT_OKAY 0x0 958#define FLX_CSTAT_OVER 0x1 959#define FLX_CSTAT_UNDER 0x2 960#define FLX_CSTAT_INVALID 0x3 961 962int ahd_read_seeprom(struct ahd_softc *ahd, uint16_t *buf, 963 u_int start_addr, u_int count, int bstream); 964 965int ahd_write_seeprom(struct ahd_softc *ahd, uint16_t *buf, 966 u_int start_addr, u_int count); 967int ahd_verify_cksum(struct seeprom_config *sc); 968int ahd_acquire_seeprom(struct ahd_softc *ahd); 969void ahd_release_seeprom(struct ahd_softc *ahd); 970 971/**************************** Message Buffer *********************************/ 972typedef enum { 973 MSG_FLAG_NONE = 0x00, 974 MSG_FLAG_EXPECT_PPR_BUSFREE = 0x01, 975 MSG_FLAG_IU_REQ_CHANGED = 0x02, 976 MSG_FLAG_EXPECT_IDE_BUSFREE = 0x04, 977 MSG_FLAG_EXPECT_QASREJ_BUSFREE = 0x08, 978 MSG_FLAG_PACKETIZED = 0x10 979} ahd_msg_flags; 980 981typedef enum { 982 MSG_TYPE_NONE = 0x00, 983 MSG_TYPE_INITIATOR_MSGOUT = 0x01, 984 MSG_TYPE_INITIATOR_MSGIN = 0x02, 985 MSG_TYPE_TARGET_MSGOUT = 0x03, 986 MSG_TYPE_TARGET_MSGIN = 0x04 987} ahd_msg_type; 988 989typedef enum { 990 MSGLOOP_IN_PROG, 991 MSGLOOP_MSGCOMPLETE, 992 MSGLOOP_TERMINATED 993} msg_loop_stat; 994 995/*********************** Software Configuration Structure *********************/ 996struct ahd_suspend_channel_state { 997 uint8_t scsiseq; 998 uint8_t sxfrctl0; 999 uint8_t sxfrctl1; 1000 uint8_t simode0; 1001 uint8_t simode1; 1002 uint8_t seltimer; 1003 uint8_t seqctl; 1004}; 1005 1006struct ahd_suspend_state { 1007 struct ahd_suspend_channel_state channel[2]; 1008 uint8_t optionmode; 1009 uint8_t dscommand0; 1010 uint8_t dspcistatus; 1011 /* hsmailbox */ 1012 uint8_t crccontrol1; 1013 uint8_t scbbaddr; 1014 /* Host and sequencer SCB counts */ 1015 uint8_t dff_thrsh; 1016 uint8_t *scratch_ram; 1017 uint8_t *btt; 1018}; 1019 1020typedef void (*ahd_bus_intr_t)(struct ahd_softc *); 1021 1022typedef enum { 1023 AHD_MODE_DFF0, 1024 AHD_MODE_DFF1, 1025 AHD_MODE_CCHAN, 1026 AHD_MODE_SCSI, 1027 AHD_MODE_CFG, 1028 AHD_MODE_UNKNOWN 1029} ahd_mode; 1030 1031#define AHD_MK_MSK(x) (0x01 << (x)) 1032#define AHD_MODE_DFF0_MSK AHD_MK_MSK(AHD_MODE_DFF0) 1033#define AHD_MODE_DFF1_MSK AHD_MK_MSK(AHD_MODE_DFF1) 1034#define AHD_MODE_CCHAN_MSK AHD_MK_MSK(AHD_MODE_CCHAN) 1035#define AHD_MODE_SCSI_MSK AHD_MK_MSK(AHD_MODE_SCSI) 1036#define AHD_MODE_CFG_MSK AHD_MK_MSK(AHD_MODE_CFG) 1037#define AHD_MODE_UNKNOWN_MSK AHD_MK_MSK(AHD_MODE_UNKNOWN) 1038#define AHD_MODE_ANY_MSK (~0) 1039 1040typedef uint8_t ahd_mode_state; 1041 1042typedef void ahd_callback_t (void *); 1043 1044struct ahd_completion 1045{ 1046 uint16_t tag; 1047 uint8_t sg_status; 1048 uint8_t valid_tag; 1049}; 1050 1051struct ahd_softc { 1052 bus_space_tag_t tags[2]; 1053 bus_space_handle_t bshs[2]; 1054#ifndef __linux__ 1055 bus_dma_tag_t buffer_dmat; /* dmat for buffer I/O */ 1056#endif 1057 struct scb_data scb_data; 1058 1059 struct hardware_scb *next_queued_hscb; 1060 struct map_node *next_queued_hscb_map; 1061 1062 /* 1063 * SCBs that have been sent to the controller 1064 */ 1065 LIST_HEAD(, scb) pending_scbs; 1066 1067 /* 1068 * Current register window mode information. 1069 */ 1070 ahd_mode dst_mode; 1071 ahd_mode src_mode; 1072 1073 /* 1074 * Saved register window mode information 1075 * used for restore on next unpause. 1076 */ 1077 ahd_mode saved_dst_mode; 1078 ahd_mode saved_src_mode; 1079 1080 /* 1081 * Platform specific data. 1082 */ 1083 struct ahd_platform_data *platform_data; 1084 1085 /* 1086 * Platform specific device information. 1087 */ 1088 ahd_dev_softc_t dev_softc; 1089 1090 /* 1091 * Bus specific device information. 1092 */ 1093 ahd_bus_intr_t bus_intr; 1094 1095 /* 1096 * Target mode related state kept on a per enabled lun basis. 1097 * Targets that are not enabled will have null entries. 1098 * As an initiator, we keep one target entry for our initiator 1099 * ID to store our sync/wide transfer settings. 1100 */ 1101 struct ahd_tmode_tstate *enabled_targets[AHD_NUM_TARGETS]; 1102 1103 /* 1104 * The black hole device responsible for handling requests for 1105 * disabled luns on enabled targets. 1106 */ 1107 struct ahd_tmode_lstate *black_hole; 1108 1109 /* 1110 * Device instance currently on the bus awaiting a continue TIO 1111 * for a command that was not given the disconnect priveledge. 1112 */ 1113 struct ahd_tmode_lstate *pending_device; 1114 1115 /* 1116 * Timer handles for timer driven callbacks. 1117 */ 1118 ahd_timer_t reset_timer; 1119 ahd_timer_t stat_timer; 1120 1121 /* 1122 * Statistics. 1123 */ 1124#define AHD_STAT_UPDATE_US 250000 /* 250ms */ 1125#define AHD_STAT_BUCKETS 4 1126 u_int cmdcmplt_bucket; 1127 uint32_t cmdcmplt_counts[AHD_STAT_BUCKETS]; 1128 uint32_t cmdcmplt_total; 1129 1130 /* 1131 * Card characteristics 1132 */ 1133 ahd_chip chip; 1134 ahd_feature features; 1135 ahd_bug bugs; 1136 ahd_flag flags; 1137 struct seeprom_config *seep_config; 1138 1139 /* Command Queues */ 1140 struct ahd_completion *qoutfifo; 1141 uint16_t qoutfifonext; 1142 uint16_t qoutfifonext_valid_tag; 1143 uint16_t qinfifonext; 1144 uint16_t qinfifo[AHD_SCB_MAX]; 1145 1146 /* 1147 * Our qfreeze count. The sequencer compares 1148 * this value with its own counter to determine 1149 * whether to allow selections to occur. 1150 */ 1151 uint16_t qfreeze_cnt; 1152 1153 /* Values to store in the SEQCTL register for pause and unpause */ 1154 uint8_t unpause; 1155 uint8_t pause; 1156 1157 /* Critical Section Data */ 1158 struct cs *critical_sections; 1159 u_int num_critical_sections; 1160 1161 /* Buffer for handling packetized bitbucket. */ 1162 uint8_t *overrun_buf; 1163 1164 /* Links for chaining softcs */ 1165 TAILQ_ENTRY(ahd_softc) links; 1166 1167 /* Channel Names ('A', 'B', etc.) */ 1168 char channel; 1169 1170 /* Initiator Bus ID */ 1171 uint8_t our_id; 1172 1173 /* 1174 * Target incoming command FIFO. 1175 */ 1176 struct target_cmd *targetcmds; 1177 uint8_t tqinfifonext; 1178 1179 /* 1180 * Cached verson of the hs_mailbox so we can avoid 1181 * pausing the sequencer during mailbox updates. 1182 */ 1183 uint8_t hs_mailbox; 1184 1185 /* 1186 * Incoming and outgoing message handling. 1187 */ 1188 uint8_t send_msg_perror; 1189 ahd_msg_flags msg_flags; 1190 ahd_msg_type msg_type; 1191 uint8_t msgout_buf[12];/* Message we are sending */ 1192 uint8_t msgin_buf[12];/* Message we are receiving */ 1193 u_int msgout_len; /* Length of message to send */ 1194 u_int msgout_index; /* Current index in msgout */ 1195 u_int msgin_index; /* Current index in msgin */ 1196 1197 /* 1198 * Mapping information for data structures shared 1199 * between the sequencer and kernel. 1200 */ 1201 bus_dma_tag_t parent_dmat; 1202 bus_dma_tag_t shared_data_dmat; 1203 struct map_node shared_data_map; 1204 1205 /* Information saved through suspend/resume cycles */ 1206 struct ahd_suspend_state suspend_state; 1207 1208 /* Number of enabled target mode device on this card */ 1209 u_int enabled_luns; 1210 1211 /* Initialization level of this data structure */ 1212 u_int init_level; 1213 1214 /* PCI cacheline size. */ 1215 u_int pci_cachesize; 1216 1217 /* IO Cell Parameters */ 1218 uint8_t iocell_opts[AHD_NUM_PER_DEV_ANNEXCOLS]; 1219 1220 u_int stack_size; 1221 uint16_t *saved_stack; 1222 1223 /* Per-Unit descriptive information */ 1224 const char *description; 1225 const char *bus_description; 1226 char *name; 1227 int unit; 1228 1229 /* Selection Timer settings */ 1230 int seltime; 1231 1232 /* 1233 * Interrupt coalescing settings. 1234 */ 1235#define AHD_INT_COALESCING_TIMER_DEFAULT 250 /*us*/ 1236#define AHD_INT_COALESCING_MAXCMDS_DEFAULT 10 1237#define AHD_INT_COALESCING_MAXCMDS_MAX 127 1238#define AHD_INT_COALESCING_MINCMDS_DEFAULT 5 1239#define AHD_INT_COALESCING_MINCMDS_MAX 127 1240#define AHD_INT_COALESCING_THRESHOLD_DEFAULT 2000 1241#define AHD_INT_COALESCING_STOP_THRESHOLD_DEFAULT 1000 1242 u_int int_coalescing_timer; 1243 u_int int_coalescing_maxcmds; 1244 u_int int_coalescing_mincmds; 1245 u_int int_coalescing_threshold; 1246 u_int int_coalescing_stop_threshold; 1247 1248 uint16_t user_discenable;/* Disconnection allowed */ 1249 uint16_t user_tagenable;/* Tagged Queuing allowed */ 1250}; 1251 1252/*************************** IO Cell Configuration ****************************/ 1253#define AHD_PRECOMP_SLEW_INDEX \ 1254 (AHD_ANNEXCOL_PRECOMP_SLEW - AHD_ANNEXCOL_PER_DEV0) 1255 1256#define AHD_AMPLITUDE_INDEX \ 1257 (AHD_ANNEXCOL_AMPLITUDE - AHD_ANNEXCOL_PER_DEV0) 1258 1259#define AHD_SET_SLEWRATE(ahd, new_slew) \ 1260do { \ 1261 (ahd)->iocell_opts[AHD_PRECOMP_SLEW_INDEX] &= ~AHD_SLEWRATE_MASK; \ 1262 (ahd)->iocell_opts[AHD_PRECOMP_SLEW_INDEX] |= \ 1263 (((new_slew) << AHD_SLEWRATE_SHIFT) & AHD_SLEWRATE_MASK); \ 1264} while (0) 1265 1266#define AHD_SET_PRECOMP(ahd, new_pcomp) \ 1267do { \ 1268 (ahd)->iocell_opts[AHD_PRECOMP_SLEW_INDEX] &= ~AHD_PRECOMP_MASK; \ 1269 (ahd)->iocell_opts[AHD_PRECOMP_SLEW_INDEX] |= \ 1270 (((new_pcomp) << AHD_PRECOMP_SHIFT) & AHD_PRECOMP_MASK); \ 1271} while (0) 1272 1273#define AHD_SET_AMPLITUDE(ahd, new_amp) \ 1274do { \ 1275 (ahd)->iocell_opts[AHD_AMPLITUDE_INDEX] &= ~AHD_AMPLITUDE_MASK; \ 1276 (ahd)->iocell_opts[AHD_AMPLITUDE_INDEX] |= \ 1277 (((new_amp) << AHD_AMPLITUDE_SHIFT) & AHD_AMPLITUDE_MASK); \ 1278} while (0) 1279 1280/************************ Active Device Information ***************************/ 1281typedef enum { 1282 ROLE_UNKNOWN, 1283 ROLE_INITIATOR, 1284 ROLE_TARGET 1285} role_t; 1286 1287struct ahd_devinfo { 1288 int our_scsiid; 1289 int target_offset; 1290 uint16_t target_mask; 1291 u_int target; 1292 u_int lun; 1293 char channel; 1294 role_t role; /* 1295 * Only guaranteed to be correct if not 1296 * in the busfree state. 1297 */ 1298}; 1299 1300/****************************** PCI Structures ********************************/ 1301#define AHD_PCI_IOADDR0 PCIR_BAR(0) /* I/O BAR*/ 1302#define AHD_PCI_MEMADDR PCIR_BAR(1) /* Memory BAR */ 1303#define AHD_PCI_IOADDR1 PCIR_BAR(3) /* Second I/O BAR */ 1304 1305typedef int (ahd_device_setup_t)(struct ahd_softc *); 1306 1307struct ahd_pci_identity { 1308 uint64_t full_id; 1309 uint64_t id_mask; 1310 char *name; 1311 ahd_device_setup_t *setup; 1312}; 1313 1314/***************************** VL/EISA Declarations ***************************/ 1315struct aic7770_identity { 1316 uint32_t full_id; 1317 uint32_t id_mask; 1318 char *name; 1319 ahd_device_setup_t *setup; 1320}; 1321extern struct aic7770_identity aic7770_ident_table []; 1322extern const int ahd_num_aic7770_devs; 1323 1324#define AHD_EISA_SLOT_OFFSET 0xc00 1325#define AHD_EISA_IOSIZE 0x100 1326 1327/*************************** Function Declarations ****************************/ 1328/******************************************************************************/ 1329void ahd_reset_cmds_pending(struct ahd_softc *ahd); 1330 1331/***************************** PCI Front End *********************************/ 1332struct ahd_pci_identity *ahd_find_pci_device(ahd_dev_softc_t); 1333int ahd_pci_config(struct ahd_softc *, 1334 struct ahd_pci_identity *); 1335int ahd_pci_test_register_access(struct ahd_softc *); 1336 1337/************************** SCB and SCB queue management **********************/ 1338void ahd_qinfifo_requeue_tail(struct ahd_softc *ahd, 1339 struct scb *scb); 1340 1341/****************************** Initialization ********************************/ 1342struct ahd_softc *ahd_alloc(void *platform_arg, char *name); 1343int ahd_softc_init(struct ahd_softc *); 1344void ahd_controller_info(struct ahd_softc *ahd, char *buf); 1345int ahd_init(struct ahd_softc *ahd); 1346int ahd_default_config(struct ahd_softc *ahd); 1347int ahd_parse_vpddata(struct ahd_softc *ahd, 1348 struct vpd_config *vpd); 1349int ahd_parse_cfgdata(struct ahd_softc *ahd, 1350 struct seeprom_config *sc); 1351void ahd_intr_enable(struct ahd_softc *ahd, int enable); 1352void ahd_pause_and_flushwork(struct ahd_softc *ahd); 1353int ahd_suspend(struct ahd_softc *ahd); 1354void ahd_set_unit(struct ahd_softc *, int); 1355void ahd_set_name(struct ahd_softc *, char *); 1356struct scb *ahd_get_scb(struct ahd_softc *ahd, u_int col_idx); 1357void ahd_free_scb(struct ahd_softc *ahd, struct scb *scb); 1358void ahd_free(struct ahd_softc *ahd); 1359int ahd_reset(struct ahd_softc *ahd, int reinit); 1360int ahd_write_flexport(struct ahd_softc *ahd, 1361 u_int addr, u_int value); 1362int ahd_read_flexport(struct ahd_softc *ahd, u_int addr, 1363 uint8_t *value); 1364 1365/*************************** Interrupt Services *******************************/ 1366void ahd_run_qoutfifo(struct ahd_softc *ahd); 1367#ifdef AHD_TARGET_MODE 1368void ahd_run_tqinfifo(struct ahd_softc *ahd, int paused); 1369#endif 1370void ahd_handle_hwerrint(struct ahd_softc *ahd); 1371void ahd_handle_seqint(struct ahd_softc *ahd, u_int intstat); 1372void ahd_handle_scsiint(struct ahd_softc *ahd, 1373 u_int intstat); 1374 1375/***************************** Error Recovery *********************************/ 1376typedef enum { 1377 SEARCH_COMPLETE, 1378 SEARCH_COUNT, 1379 SEARCH_REMOVE, 1380 SEARCH_PRINT 1381} ahd_search_action; 1382int ahd_search_qinfifo(struct ahd_softc *ahd, int target, 1383 char channel, int lun, u_int tag, 1384 role_t role, uint32_t status, 1385 ahd_search_action action); 1386int ahd_search_disc_list(struct ahd_softc *ahd, int target, 1387 char channel, int lun, u_int tag, 1388 int stop_on_first, int remove, 1389 int save_state); 1390int ahd_reset_channel(struct ahd_softc *ahd, char channel, 1391 int initiate_reset); 1392/*************************** Utility Functions ********************************/ 1393void ahd_compile_devinfo(struct ahd_devinfo *devinfo, 1394 u_int our_id, u_int target, 1395 u_int lun, char channel, 1396 role_t role); 1397/************************** Transfer Negotiation ******************************/ 1398void ahd_find_syncrate(struct ahd_softc *ahd, u_int *period, 1399 u_int *ppr_options, u_int maxsync); 1400/* 1401 * Negotiation types. These are used to qualify if we should renegotiate 1402 * even if our goal and current transport parameters are identical. 1403 */ 1404typedef enum { 1405 AHD_NEG_TO_GOAL, /* Renegotiate only if goal and curr differ. */ 1406 AHD_NEG_IF_NON_ASYNC, /* Renegotiate so long as goal is non-async. */ 1407 AHD_NEG_ALWAYS /* Renegotiat even if goal is async. */ 1408} ahd_neg_type; 1409int ahd_update_neg_request(struct ahd_softc*, 1410 struct ahd_devinfo*, 1411 struct ahd_tmode_tstate*, 1412 struct ahd_initiator_tinfo*, 1413 ahd_neg_type); 1414void ahd_set_width(struct ahd_softc *ahd, 1415 struct ahd_devinfo *devinfo, 1416 u_int width, u_int type, int paused); 1417void ahd_set_syncrate(struct ahd_softc *ahd, 1418 struct ahd_devinfo *devinfo, 1419 u_int period, u_int offset, 1420 u_int ppr_options, 1421 u_int type, int paused); 1422typedef enum { 1423 AHD_QUEUE_NONE, 1424 AHD_QUEUE_BASIC, 1425 AHD_QUEUE_TAGGED 1426} ahd_queue_alg; 1427 1428/**************************** Target Mode *************************************/ 1429#ifdef AHD_TARGET_MODE 1430void ahd_send_lstate_events(struct ahd_softc *, 1431 struct ahd_tmode_lstate *); 1432void ahd_handle_en_lun(struct ahd_softc *ahd, 1433 struct cam_sim *sim, union ccb *ccb); 1434cam_status ahd_find_tmode_devs(struct ahd_softc *ahd, 1435 struct cam_sim *sim, union ccb *ccb, 1436 struct ahd_tmode_tstate **tstate, 1437 struct ahd_tmode_lstate **lstate, 1438 int notfound_failure); 1439#ifndef AHD_TMODE_ENABLE 1440#define AHD_TMODE_ENABLE 0 1441#endif 1442#endif 1443/******************************* Debug ***************************************/ 1444#ifdef AHD_DEBUG 1445extern uint32_t ahd_debug; 1446#define AHD_SHOW_MISC 0x00001 1447#define AHD_SHOW_SENSE 0x00002 1448#define AHD_SHOW_RECOVERY 0x00004 1449#define AHD_DUMP_SEEPROM 0x00008 1450#define AHD_SHOW_TERMCTL 0x00010 1451#define AHD_SHOW_MEMORY 0x00020 1452#define AHD_SHOW_MESSAGES 0x00040 1453#define AHD_SHOW_MODEPTR 0x00080 1454#define AHD_SHOW_SELTO 0x00100 1455#define AHD_SHOW_FIFOS 0x00200 1456#define AHD_SHOW_QFULL 0x00400 1457#define AHD_SHOW_DV 0x00800 1458#define AHD_SHOW_MASKED_ERRORS 0x01000 1459#define AHD_SHOW_QUEUE 0x02000 1460#define AHD_SHOW_TQIN 0x04000 1461#define AHD_SHOW_SG 0x08000 1462#define AHD_SHOW_INT_COALESCING 0x10000 1463#define AHD_DEBUG_SEQUENCER 0x20000 1464#endif 1465void ahd_print_devinfo(struct ahd_softc *ahd, 1466 struct ahd_devinfo *devinfo); 1467void ahd_dump_card_state(struct ahd_softc *ahd); 1468int ahd_print_register(ahd_reg_parse_entry_t *table, 1469 u_int num_entries, 1470 const char *name, 1471 u_int address, 1472 u_int value, 1473 u_int *cur_column, 1474 u_int wrap_point); 1475#endif /* _AIC79XX_H_ */ 1476