lpfc_vport.c revision 76a95d75ede64e4f1684ddb8c626fdfdb641bda2
1/*******************************************************************
2 * This file is part of the Emulex Linux Device Driver for         *
3 * Fibre Channel Host Bus Adapters.                                *
4 * Copyright (C) 2004-2008 Emulex.  All rights reserved.           *
5 * EMULEX and SLI are trademarks of Emulex.                        *
6 * www.emulex.com                                                  *
7 * Portions Copyright (C) 2004-2005 Christoph Hellwig              *
8 *                                                                 *
9 * This program is free software; you can redistribute it and/or   *
10 * modify it under the terms of version 2 of the GNU General       *
11 * Public License as published by the Free Software Foundation.    *
12 * This program is distributed in the hope that it will be useful. *
13 * ALL EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND          *
14 * WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY,  *
15 * FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT, ARE      *
16 * DISCLAIMED, EXCEPT TO THE EXTENT THAT SUCH DISCLAIMERS ARE HELD *
17 * TO BE LEGALLY INVALID.  See the GNU General Public License for  *
18 * more details, a copy of which can be found in the file COPYING  *
19 * included with this package.                                     *
20 *******************************************************************/
21
22#include <linux/blkdev.h>
23#include <linux/delay.h>
24#include <linux/dma-mapping.h>
25#include <linux/idr.h>
26#include <linux/interrupt.h>
27#include <linux/kthread.h>
28#include <linux/pci.h>
29#include <linux/slab.h>
30#include <linux/spinlock.h>
31
32#include <scsi/scsi.h>
33#include <scsi/scsi_device.h>
34#include <scsi/scsi_host.h>
35#include <scsi/scsi_transport_fc.h>
36#include "lpfc_hw4.h"
37#include "lpfc_hw.h"
38#include "lpfc_sli.h"
39#include "lpfc_sli4.h"
40#include "lpfc_nl.h"
41#include "lpfc_disc.h"
42#include "lpfc_scsi.h"
43#include "lpfc.h"
44#include "lpfc_logmsg.h"
45#include "lpfc_crtn.h"
46#include "lpfc_version.h"
47#include "lpfc_vport.h"
48
49inline void lpfc_vport_set_state(struct lpfc_vport *vport,
50				 enum fc_vport_state new_state)
51{
52	struct fc_vport *fc_vport = vport->fc_vport;
53
54	if (fc_vport) {
55		/*
56		 * When the transport defines fc_vport_set state we will replace
57		 * this code with the following line
58		 */
59		/* fc_vport_set_state(fc_vport, new_state); */
60		if (new_state != FC_VPORT_INITIALIZING)
61			fc_vport->vport_last_state = fc_vport->vport_state;
62		fc_vport->vport_state = new_state;
63	}
64
65	/* for all the error states we will set the invternal state to FAILED */
66	switch (new_state) {
67	case FC_VPORT_NO_FABRIC_SUPP:
68	case FC_VPORT_NO_FABRIC_RSCS:
69	case FC_VPORT_FABRIC_LOGOUT:
70	case FC_VPORT_FABRIC_REJ_WWN:
71	case FC_VPORT_FAILED:
72		vport->port_state = LPFC_VPORT_FAILED;
73		break;
74	case FC_VPORT_LINKDOWN:
75		vport->port_state = LPFC_VPORT_UNKNOWN;
76		break;
77	default:
78		/* do nothing */
79		break;
80	}
81}
82
83static int
84lpfc_alloc_vpi(struct lpfc_hba *phba)
85{
86	int  vpi;
87
88	spin_lock_irq(&phba->hbalock);
89	/* Start at bit 1 because vpi zero is reserved for the physical port */
90	vpi = find_next_zero_bit(phba->vpi_bmask, (phba->max_vpi + 1), 1);
91	if (vpi > phba->max_vpi)
92		vpi = 0;
93	else
94		set_bit(vpi, phba->vpi_bmask);
95	if (phba->sli_rev == LPFC_SLI_REV4)
96		phba->sli4_hba.max_cfg_param.vpi_used++;
97	spin_unlock_irq(&phba->hbalock);
98	return vpi;
99}
100
101static void
102lpfc_free_vpi(struct lpfc_hba *phba, int vpi)
103{
104	if (vpi == 0)
105		return;
106	spin_lock_irq(&phba->hbalock);
107	clear_bit(vpi, phba->vpi_bmask);
108	if (phba->sli_rev == LPFC_SLI_REV4)
109		phba->sli4_hba.max_cfg_param.vpi_used--;
110	spin_unlock_irq(&phba->hbalock);
111}
112
113static int
114lpfc_vport_sparm(struct lpfc_hba *phba, struct lpfc_vport *vport)
115{
116	LPFC_MBOXQ_t *pmb;
117	MAILBOX_t *mb;
118	struct lpfc_dmabuf *mp;
119	int  rc;
120
121	pmb = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
122	if (!pmb) {
123		return -ENOMEM;
124	}
125	mb = &pmb->u.mb;
126
127	rc = lpfc_read_sparam(phba, pmb, vport->vpi);
128	if (rc) {
129		mempool_free(pmb, phba->mbox_mem_pool);
130		return -ENOMEM;
131	}
132
133	/*
134	 * Grab buffer pointer and clear context1 so we can use
135	 * lpfc_sli_issue_box_wait
136	 */
137	mp = (struct lpfc_dmabuf *) pmb->context1;
138	pmb->context1 = NULL;
139
140	pmb->vport = vport;
141	rc = lpfc_sli_issue_mbox_wait(phba, pmb, phba->fc_ratov * 2);
142	if (rc != MBX_SUCCESS) {
143		if (signal_pending(current)) {
144			lpfc_printf_vlog(vport, KERN_ERR, LOG_INIT | LOG_VPORT,
145					 "1830 Signal aborted mbxCmd x%x\n",
146					 mb->mbxCommand);
147			lpfc_mbuf_free(phba, mp->virt, mp->phys);
148			kfree(mp);
149			if (rc != MBX_TIMEOUT)
150				mempool_free(pmb, phba->mbox_mem_pool);
151			return -EINTR;
152		} else {
153			lpfc_printf_vlog(vport, KERN_ERR, LOG_INIT | LOG_VPORT,
154					 "1818 VPort failed init, mbxCmd x%x "
155					 "READ_SPARM mbxStatus x%x, rc = x%x\n",
156					 mb->mbxCommand, mb->mbxStatus, rc);
157			lpfc_mbuf_free(phba, mp->virt, mp->phys);
158			kfree(mp);
159			if (rc != MBX_TIMEOUT)
160				mempool_free(pmb, phba->mbox_mem_pool);
161			return -EIO;
162		}
163	}
164
165	memcpy(&vport->fc_sparam, mp->virt, sizeof (struct serv_parm));
166	memcpy(&vport->fc_nodename, &vport->fc_sparam.nodeName,
167	       sizeof (struct lpfc_name));
168	memcpy(&vport->fc_portname, &vport->fc_sparam.portName,
169	       sizeof (struct lpfc_name));
170
171	lpfc_mbuf_free(phba, mp->virt, mp->phys);
172	kfree(mp);
173	mempool_free(pmb, phba->mbox_mem_pool);
174
175	return 0;
176}
177
178static int
179lpfc_valid_wwn_format(struct lpfc_hba *phba, struct lpfc_name *wwn,
180		      const char *name_type)
181{
182				/* ensure that IEEE format 1 addresses
183				 * contain zeros in bits 59-48
184				 */
185	if (!((wwn->u.wwn[0] >> 4) == 1 &&
186	      ((wwn->u.wwn[0] & 0xf) != 0 || (wwn->u.wwn[1] & 0xf) != 0)))
187		return 1;
188
189	lpfc_printf_log(phba, KERN_ERR, LOG_VPORT,
190			"1822 Invalid %s: %02x:%02x:%02x:%02x:"
191			"%02x:%02x:%02x:%02x\n",
192			name_type,
193			wwn->u.wwn[0], wwn->u.wwn[1],
194			wwn->u.wwn[2], wwn->u.wwn[3],
195			wwn->u.wwn[4], wwn->u.wwn[5],
196			wwn->u.wwn[6], wwn->u.wwn[7]);
197	return 0;
198}
199
200static int
201lpfc_unique_wwpn(struct lpfc_hba *phba, struct lpfc_vport *new_vport)
202{
203	struct lpfc_vport *vport;
204	unsigned long flags;
205
206	spin_lock_irqsave(&phba->hbalock, flags);
207	list_for_each_entry(vport, &phba->port_list, listentry) {
208		if (vport == new_vport)
209			continue;
210		/* If they match, return not unique */
211		if (memcmp(&vport->fc_sparam.portName,
212			   &new_vport->fc_sparam.portName,
213			   sizeof(struct lpfc_name)) == 0) {
214			spin_unlock_irqrestore(&phba->hbalock, flags);
215			return 0;
216		}
217	}
218	spin_unlock_irqrestore(&phba->hbalock, flags);
219	return 1;
220}
221
222/**
223 * lpfc_discovery_wait - Wait for driver discovery to quiesce
224 * @vport: The virtual port for which this call is being executed.
225 *
226 * This driver calls this routine specifically from lpfc_vport_delete
227 * to enforce a synchronous execution of vport
228 * delete relative to discovery activities.  The
229 * lpfc_vport_delete routine should not return until it
230 * can reasonably guarantee that discovery has quiesced.
231 * Post FDISC LOGO, the driver must wait until its SAN teardown is
232 * complete and all resources recovered before allowing
233 * cleanup.
234 *
235 * This routine does not require any locks held.
236 **/
237static void lpfc_discovery_wait(struct lpfc_vport *vport)
238{
239	struct lpfc_hba *phba = vport->phba;
240	uint32_t wait_flags = 0;
241	unsigned long wait_time_max;
242	unsigned long start_time;
243
244	wait_flags = FC_RSCN_MODE | FC_RSCN_DISCOVERY | FC_NLP_MORE |
245		     FC_RSCN_DEFERRED | FC_NDISC_ACTIVE | FC_DISC_TMO;
246
247	/*
248	 * The time constraint on this loop is a balance between the
249	 * fabric RA_TOV value and dev_loss tmo.  The driver's
250	 * devloss_tmo is 10 giving this loop a 3x multiplier minimally.
251	 */
252	wait_time_max = msecs_to_jiffies(((phba->fc_ratov * 3) + 3) * 1000);
253	wait_time_max += jiffies;
254	start_time = jiffies;
255	while (time_before(jiffies, wait_time_max)) {
256		if ((vport->num_disc_nodes > 0)    ||
257		    (vport->fc_flag & wait_flags)  ||
258		    ((vport->port_state > LPFC_VPORT_FAILED) &&
259		     (vport->port_state < LPFC_VPORT_READY))) {
260			lpfc_printf_vlog(vport, KERN_INFO, LOG_VPORT,
261					"1833 Vport discovery quiesce Wait:"
262					" state x%x fc_flags x%x"
263					" num_nodes x%x, waiting 1000 msecs"
264					" total wait msecs x%x\n",
265					vport->port_state, vport->fc_flag,
266					vport->num_disc_nodes,
267					jiffies_to_msecs(jiffies - start_time));
268			msleep(1000);
269		} else {
270			/* Base case.  Wait variants satisfied.  Break out */
271			lpfc_printf_vlog(vport, KERN_INFO, LOG_VPORT,
272					 "1834 Vport discovery quiesced:"
273					 " state x%x fc_flags x%x"
274					 " wait msecs x%x\n",
275					 vport->port_state, vport->fc_flag,
276					 jiffies_to_msecs(jiffies
277						- start_time));
278			break;
279		}
280	}
281
282	if (time_after(jiffies, wait_time_max))
283		lpfc_printf_vlog(vport, KERN_ERR, LOG_VPORT,
284				"1835 Vport discovery quiesce failed:"
285				" state x%x fc_flags x%x wait msecs x%x\n",
286				vport->port_state, vport->fc_flag,
287				jiffies_to_msecs(jiffies - start_time));
288}
289
290int
291lpfc_vport_create(struct fc_vport *fc_vport, bool disable)
292{
293	struct lpfc_nodelist *ndlp;
294	struct Scsi_Host *shost = fc_vport->shost;
295	struct lpfc_vport *pport = (struct lpfc_vport *) shost->hostdata;
296	struct lpfc_hba   *phba = pport->phba;
297	struct lpfc_vport *vport = NULL;
298	int instance;
299	int vpi;
300	int rc = VPORT_ERROR;
301	int status;
302
303	if ((phba->sli_rev < 3) || !(phba->cfg_enable_npiv)) {
304		lpfc_printf_log(phba, KERN_ERR, LOG_VPORT,
305				"1808 Create VPORT failed: "
306				"NPIV is not enabled: SLImode:%d\n",
307				phba->sli_rev);
308		rc = VPORT_INVAL;
309		goto error_out;
310	}
311
312	vpi = lpfc_alloc_vpi(phba);
313	if (vpi == 0) {
314		lpfc_printf_log(phba, KERN_ERR, LOG_VPORT,
315				"1809 Create VPORT failed: "
316				"Max VPORTs (%d) exceeded\n",
317				phba->max_vpi);
318		rc = VPORT_NORESOURCES;
319		goto error_out;
320	}
321
322	/* Assign an unused board number */
323	if ((instance = lpfc_get_instance()) < 0) {
324		lpfc_printf_log(phba, KERN_ERR, LOG_VPORT,
325				"1810 Create VPORT failed: Cannot get "
326				"instance number\n");
327		lpfc_free_vpi(phba, vpi);
328		rc = VPORT_NORESOURCES;
329		goto error_out;
330	}
331
332	vport = lpfc_create_port(phba, instance, &fc_vport->dev);
333	if (!vport) {
334		lpfc_printf_log(phba, KERN_ERR, LOG_VPORT,
335				"1811 Create VPORT failed: vpi x%x\n", vpi);
336		lpfc_free_vpi(phba, vpi);
337		rc = VPORT_NORESOURCES;
338		goto error_out;
339	}
340
341	vport->vpi = vpi;
342	lpfc_debugfs_initialize(vport);
343
344	if ((status = lpfc_vport_sparm(phba, vport))) {
345		if (status == -EINTR) {
346			lpfc_printf_vlog(vport, KERN_ERR, LOG_VPORT,
347					 "1831 Create VPORT Interrupted.\n");
348			rc = VPORT_ERROR;
349		} else {
350			lpfc_printf_vlog(vport, KERN_ERR, LOG_VPORT,
351					 "1813 Create VPORT failed. "
352					 "Cannot get sparam\n");
353			rc = VPORT_NORESOURCES;
354		}
355		lpfc_free_vpi(phba, vpi);
356		destroy_port(vport);
357		goto error_out;
358	}
359
360	u64_to_wwn(fc_vport->node_name, vport->fc_nodename.u.wwn);
361	u64_to_wwn(fc_vport->port_name, vport->fc_portname.u.wwn);
362
363	memcpy(&vport->fc_sparam.portName, vport->fc_portname.u.wwn, 8);
364	memcpy(&vport->fc_sparam.nodeName, vport->fc_nodename.u.wwn, 8);
365
366	if (!lpfc_valid_wwn_format(phba, &vport->fc_sparam.nodeName, "WWNN") ||
367	    !lpfc_valid_wwn_format(phba, &vport->fc_sparam.portName, "WWPN")) {
368		lpfc_printf_vlog(vport, KERN_ERR, LOG_VPORT,
369				 "1821 Create VPORT failed. "
370				 "Invalid WWN format\n");
371		lpfc_free_vpi(phba, vpi);
372		destroy_port(vport);
373		rc = VPORT_INVAL;
374		goto error_out;
375	}
376
377	if (!lpfc_unique_wwpn(phba, vport)) {
378		lpfc_printf_vlog(vport, KERN_ERR, LOG_VPORT,
379				 "1823 Create VPORT failed. "
380				 "Duplicate WWN on HBA\n");
381		lpfc_free_vpi(phba, vpi);
382		destroy_port(vport);
383		rc = VPORT_INVAL;
384		goto error_out;
385	}
386
387	/* Create binary sysfs attribute for vport */
388	lpfc_alloc_sysfs_attr(vport);
389
390	*(struct lpfc_vport **)fc_vport->dd_data = vport;
391	vport->fc_vport = fc_vport;
392
393	/*
394	 * In SLI4, the vpi must be activated before it can be used
395	 * by the port.
396	 */
397	if ((phba->sli_rev == LPFC_SLI_REV4) &&
398	    (pport->fc_flag & FC_VFI_REGISTERED)) {
399		rc = lpfc_sli4_init_vpi(vport);
400		if (rc) {
401			lpfc_printf_log(phba, KERN_ERR, LOG_VPORT,
402					"1838 Failed to INIT_VPI on vpi %d "
403					"status %d\n", vpi, rc);
404			rc = VPORT_NORESOURCES;
405			lpfc_free_vpi(phba, vpi);
406			goto error_out;
407		}
408	} else if (phba->sli_rev == LPFC_SLI_REV4) {
409		/*
410		 * Driver cannot INIT_VPI now. Set the flags to
411		 * init_vpi when reg_vfi complete.
412		 */
413		vport->fc_flag |= FC_VPORT_NEEDS_INIT_VPI;
414		lpfc_vport_set_state(vport, FC_VPORT_LINKDOWN);
415		rc = VPORT_OK;
416		goto out;
417	}
418
419	if ((phba->link_state < LPFC_LINK_UP) ||
420	    (pport->port_state < LPFC_FABRIC_CFG_LINK) ||
421	    (phba->fc_topology == LPFC_TOPOLOGY_LOOP)) {
422		lpfc_vport_set_state(vport, FC_VPORT_LINKDOWN);
423		rc = VPORT_OK;
424		goto out;
425	}
426
427	if (disable) {
428		lpfc_vport_set_state(vport, FC_VPORT_DISABLED);
429		rc = VPORT_OK;
430		goto out;
431	}
432
433	/* Use the Physical nodes Fabric NDLP to determine if the link is
434	 * up and ready to FDISC.
435	 */
436	ndlp = lpfc_findnode_did(phba->pport, Fabric_DID);
437	if (ndlp && NLP_CHK_NODE_ACT(ndlp) &&
438	    ndlp->nlp_state == NLP_STE_UNMAPPED_NODE) {
439		if (phba->link_flag & LS_NPIV_FAB_SUPPORTED) {
440			lpfc_set_disctmo(vport);
441			lpfc_initial_fdisc(vport);
442		} else {
443			lpfc_vport_set_state(vport, FC_VPORT_NO_FABRIC_SUPP);
444			lpfc_printf_vlog(vport, KERN_ERR, LOG_ELS,
445					 "0262 No NPIV Fabric support\n");
446		}
447	} else {
448		lpfc_vport_set_state(vport, FC_VPORT_FAILED);
449	}
450	rc = VPORT_OK;
451
452out:
453	lpfc_printf_vlog(vport, KERN_ERR, LOG_VPORT,
454			"1825 Vport Created.\n");
455	lpfc_host_attrib_init(lpfc_shost_from_vport(vport));
456error_out:
457	return rc;
458}
459
460static int
461disable_vport(struct fc_vport *fc_vport)
462{
463	struct lpfc_vport *vport = *(struct lpfc_vport **)fc_vport->dd_data;
464	struct lpfc_hba   *phba = vport->phba;
465	struct lpfc_nodelist *ndlp = NULL, *next_ndlp = NULL;
466	long timeout;
467
468	ndlp = lpfc_findnode_did(vport, Fabric_DID);
469	if (ndlp && NLP_CHK_NODE_ACT(ndlp)
470	    && phba->link_state >= LPFC_LINK_UP) {
471		vport->unreg_vpi_cmpl = VPORT_INVAL;
472		timeout = msecs_to_jiffies(phba->fc_ratov * 2000);
473		if (!lpfc_issue_els_npiv_logo(vport, ndlp))
474			while (vport->unreg_vpi_cmpl == VPORT_INVAL && timeout)
475				timeout = schedule_timeout(timeout);
476	}
477
478	lpfc_sli_host_down(vport);
479
480	/* Mark all nodes for discovery so we can remove them by
481	 * calling lpfc_cleanup_rpis(vport, 1)
482	 */
483	list_for_each_entry_safe(ndlp, next_ndlp, &vport->fc_nodes, nlp_listp) {
484		if (!NLP_CHK_NODE_ACT(ndlp))
485			continue;
486		if (ndlp->nlp_state == NLP_STE_UNUSED_NODE)
487			continue;
488		lpfc_disc_state_machine(vport, ndlp, NULL,
489					NLP_EVT_DEVICE_RECOVERY);
490	}
491	lpfc_cleanup_rpis(vport, 1);
492
493	lpfc_stop_vport_timers(vport);
494	lpfc_unreg_all_rpis(vport);
495	lpfc_unreg_default_rpis(vport);
496	/*
497	 * Completion of unreg_vpi (lpfc_mbx_cmpl_unreg_vpi) does the
498	 * scsi_host_put() to release the vport.
499	 */
500	lpfc_mbx_unreg_vpi(vport);
501
502	lpfc_vport_set_state(vport, FC_VPORT_DISABLED);
503	lpfc_printf_vlog(vport, KERN_ERR, LOG_VPORT,
504			 "1826 Vport Disabled.\n");
505	return VPORT_OK;
506}
507
508static int
509enable_vport(struct fc_vport *fc_vport)
510{
511	struct lpfc_vport *vport = *(struct lpfc_vport **)fc_vport->dd_data;
512	struct lpfc_hba   *phba = vport->phba;
513	struct lpfc_nodelist *ndlp = NULL;
514	struct Scsi_Host *shost = lpfc_shost_from_vport(vport);
515
516	if ((phba->link_state < LPFC_LINK_UP) ||
517	    (phba->fc_topology == LPFC_TOPOLOGY_LOOP)) {
518		lpfc_vport_set_state(vport, FC_VPORT_LINKDOWN);
519		return VPORT_OK;
520	}
521
522	spin_lock_irq(shost->host_lock);
523	vport->load_flag |= FC_LOADING;
524	vport->fc_flag |= FC_VPORT_NEEDS_REG_VPI;
525	spin_unlock_irq(shost->host_lock);
526
527	/* Use the Physical nodes Fabric NDLP to determine if the link is
528	 * up and ready to FDISC.
529	 */
530	ndlp = lpfc_findnode_did(phba->pport, Fabric_DID);
531	if (ndlp && NLP_CHK_NODE_ACT(ndlp)
532	    && ndlp->nlp_state == NLP_STE_UNMAPPED_NODE) {
533		if (phba->link_flag & LS_NPIV_FAB_SUPPORTED) {
534			lpfc_set_disctmo(vport);
535			lpfc_initial_fdisc(vport);
536		} else {
537			lpfc_vport_set_state(vport, FC_VPORT_NO_FABRIC_SUPP);
538			lpfc_printf_vlog(vport, KERN_ERR, LOG_ELS,
539					 "0264 No NPIV Fabric support\n");
540		}
541	} else {
542		lpfc_vport_set_state(vport, FC_VPORT_FAILED);
543	}
544	lpfc_printf_vlog(vport, KERN_ERR, LOG_VPORT,
545			 "1827 Vport Enabled.\n");
546	return VPORT_OK;
547}
548
549int
550lpfc_vport_disable(struct fc_vport *fc_vport, bool disable)
551{
552	if (disable)
553		return disable_vport(fc_vport);
554	else
555		return enable_vport(fc_vport);
556}
557
558
559int
560lpfc_vport_delete(struct fc_vport *fc_vport)
561{
562	struct lpfc_nodelist *ndlp = NULL;
563	struct Scsi_Host *shost = (struct Scsi_Host *) fc_vport->shost;
564	struct lpfc_vport *vport = *(struct lpfc_vport **)fc_vport->dd_data;
565	struct lpfc_hba   *phba = vport->phba;
566	long timeout;
567
568	if (vport->port_type == LPFC_PHYSICAL_PORT) {
569		lpfc_printf_vlog(vport, KERN_ERR, LOG_VPORT,
570				 "1812 vport_delete failed: Cannot delete "
571				 "physical host\n");
572		return VPORT_ERROR;
573	}
574
575	/* If the vport is a static vport fail the deletion. */
576	if ((vport->vport_flag & STATIC_VPORT) &&
577		!(phba->pport->load_flag & FC_UNLOADING)) {
578		lpfc_printf_vlog(vport, KERN_ERR, LOG_VPORT,
579				 "1837 vport_delete failed: Cannot delete "
580				 "static vport.\n");
581		return VPORT_ERROR;
582	}
583	spin_lock_irq(&phba->hbalock);
584	vport->load_flag |= FC_UNLOADING;
585	spin_unlock_irq(&phba->hbalock);
586	/*
587	 * If we are not unloading the driver then prevent the vport_delete
588	 * from happening until after this vport's discovery is finished.
589	 */
590	if (!(phba->pport->load_flag & FC_UNLOADING)) {
591		int check_count = 0;
592		while (check_count < ((phba->fc_ratov * 3) + 3) &&
593		       vport->port_state > LPFC_VPORT_FAILED &&
594		       vport->port_state < LPFC_VPORT_READY) {
595			check_count++;
596			msleep(1000);
597		}
598		if (vport->port_state > LPFC_VPORT_FAILED &&
599		    vport->port_state < LPFC_VPORT_READY)
600			return -EAGAIN;
601	}
602	/*
603	 * This is a bit of a mess.  We want to ensure the shost doesn't get
604	 * torn down until we're done with the embedded lpfc_vport structure.
605	 *
606	 * Beyond holding a reference for this function, we also need a
607	 * reference for outstanding I/O requests we schedule during delete
608	 * processing.  But once we scsi_remove_host() we can no longer obtain
609	 * a reference through scsi_host_get().
610	 *
611	 * So we take two references here.  We release one reference at the
612	 * bottom of the function -- after delinking the vport.  And we
613	 * release the other at the completion of the unreg_vpi that get's
614	 * initiated after we've disposed of all other resources associated
615	 * with the port.
616	 */
617	if (!scsi_host_get(shost))
618		return VPORT_INVAL;
619	if (!scsi_host_get(shost)) {
620		scsi_host_put(shost);
621		return VPORT_INVAL;
622	}
623	lpfc_free_sysfs_attr(vport);
624
625	lpfc_debugfs_terminate(vport);
626
627	/* Remove FC host and then SCSI host with the vport */
628	fc_remove_host(lpfc_shost_from_vport(vport));
629	scsi_remove_host(lpfc_shost_from_vport(vport));
630
631	ndlp = lpfc_findnode_did(phba->pport, Fabric_DID);
632
633	/* In case of driver unload, we shall not perform fabric logo as the
634	 * worker thread already stopped at this stage and, in this case, we
635	 * can safely skip the fabric logo.
636	 */
637	if (phba->pport->load_flag & FC_UNLOADING) {
638		if (ndlp && NLP_CHK_NODE_ACT(ndlp) &&
639		    ndlp->nlp_state == NLP_STE_UNMAPPED_NODE &&
640		    phba->link_state >= LPFC_LINK_UP) {
641			/* First look for the Fabric ndlp */
642			ndlp = lpfc_findnode_did(vport, Fabric_DID);
643			if (!ndlp)
644				goto skip_logo;
645			else if (!NLP_CHK_NODE_ACT(ndlp)) {
646				ndlp = lpfc_enable_node(vport, ndlp,
647							NLP_STE_UNUSED_NODE);
648				if (!ndlp)
649					goto skip_logo;
650			}
651			/* Remove ndlp from vport npld list */
652			lpfc_dequeue_node(vport, ndlp);
653
654			/* Indicate free memory when release */
655			spin_lock_irq(&phba->ndlp_lock);
656			NLP_SET_FREE_REQ(ndlp);
657			spin_unlock_irq(&phba->ndlp_lock);
658			/* Kick off release ndlp when it can be safely done */
659			lpfc_nlp_put(ndlp);
660		}
661		goto skip_logo;
662	}
663
664	/* Otherwise, we will perform fabric logo as needed */
665	if (ndlp && NLP_CHK_NODE_ACT(ndlp) &&
666	    ndlp->nlp_state == NLP_STE_UNMAPPED_NODE &&
667	    phba->link_state >= LPFC_LINK_UP &&
668	    phba->fc_topology != LPFC_TOPOLOGY_LOOP) {
669		if (vport->cfg_enable_da_id) {
670			timeout = msecs_to_jiffies(phba->fc_ratov * 2000);
671			if (!lpfc_ns_cmd(vport, SLI_CTNS_DA_ID, 0, 0))
672				while (vport->ct_flags && timeout)
673					timeout = schedule_timeout(timeout);
674			else
675				lpfc_printf_log(vport->phba, KERN_WARNING,
676						LOG_VPORT,
677						"1829 CT command failed to "
678						"delete objects on fabric\n");
679		}
680		/* First look for the Fabric ndlp */
681		ndlp = lpfc_findnode_did(vport, Fabric_DID);
682		if (!ndlp) {
683			/* Cannot find existing Fabric ndlp, allocate one */
684			ndlp = mempool_alloc(phba->nlp_mem_pool, GFP_KERNEL);
685			if (!ndlp)
686				goto skip_logo;
687			lpfc_nlp_init(vport, ndlp, Fabric_DID);
688			/* Indicate free memory when release */
689			NLP_SET_FREE_REQ(ndlp);
690		} else {
691			if (!NLP_CHK_NODE_ACT(ndlp))
692				ndlp = lpfc_enable_node(vport, ndlp,
693						NLP_STE_UNUSED_NODE);
694				if (!ndlp)
695					goto skip_logo;
696
697			/* Remove ndlp from vport npld list */
698			lpfc_dequeue_node(vport, ndlp);
699			spin_lock_irq(&phba->ndlp_lock);
700			if (!NLP_CHK_FREE_REQ(ndlp))
701				/* Indicate free memory when release */
702				NLP_SET_FREE_REQ(ndlp);
703			else {
704				/* Skip this if ndlp is already in free mode */
705				spin_unlock_irq(&phba->ndlp_lock);
706				goto skip_logo;
707			}
708			spin_unlock_irq(&phba->ndlp_lock);
709		}
710		if (!(vport->vpi_state & LPFC_VPI_REGISTERED))
711			goto skip_logo;
712		vport->unreg_vpi_cmpl = VPORT_INVAL;
713		timeout = msecs_to_jiffies(phba->fc_ratov * 2000);
714		if (!lpfc_issue_els_npiv_logo(vport, ndlp))
715			while (vport->unreg_vpi_cmpl == VPORT_INVAL && timeout)
716				timeout = schedule_timeout(timeout);
717	}
718
719	if (!(phba->pport->load_flag & FC_UNLOADING))
720		lpfc_discovery_wait(vport);
721
722skip_logo:
723	lpfc_cleanup(vport);
724	lpfc_sli_host_down(vport);
725
726	lpfc_stop_vport_timers(vport);
727
728	if (!(phba->pport->load_flag & FC_UNLOADING)) {
729		lpfc_unreg_all_rpis(vport);
730		lpfc_unreg_default_rpis(vport);
731		/*
732		 * Completion of unreg_vpi (lpfc_mbx_cmpl_unreg_vpi)
733		 * does the scsi_host_put() to release the vport.
734		 */
735		if (lpfc_mbx_unreg_vpi(vport))
736			scsi_host_put(shost);
737	} else
738		scsi_host_put(shost);
739
740	lpfc_free_vpi(phba, vport->vpi);
741	vport->work_port_events = 0;
742	spin_lock_irq(&phba->hbalock);
743	list_del_init(&vport->listentry);
744	spin_unlock_irq(&phba->hbalock);
745	lpfc_printf_vlog(vport, KERN_ERR, LOG_VPORT,
746			 "1828 Vport Deleted.\n");
747	scsi_host_put(shost);
748	return VPORT_OK;
749}
750
751struct lpfc_vport **
752lpfc_create_vport_work_array(struct lpfc_hba *phba)
753{
754	struct lpfc_vport *port_iterator;
755	struct lpfc_vport **vports;
756	int index = 0;
757	vports = kzalloc((phba->max_vports + 1) * sizeof(struct lpfc_vport *),
758			 GFP_KERNEL);
759	if (vports == NULL)
760		return NULL;
761	spin_lock_irq(&phba->hbalock);
762	list_for_each_entry(port_iterator, &phba->port_list, listentry) {
763		if (!scsi_host_get(lpfc_shost_from_vport(port_iterator))) {
764			if (!(port_iterator->load_flag & FC_UNLOADING))
765				lpfc_printf_vlog(port_iterator, KERN_ERR,
766					 LOG_VPORT,
767					 "1801 Create vport work array FAILED: "
768					 "cannot do scsi_host_get\n");
769			continue;
770		}
771		vports[index++] = port_iterator;
772	}
773	spin_unlock_irq(&phba->hbalock);
774	return vports;
775}
776
777void
778lpfc_destroy_vport_work_array(struct lpfc_hba *phba, struct lpfc_vport **vports)
779{
780	int i;
781	if (vports == NULL)
782		return;
783	for (i = 0; i <= phba->max_vports && vports[i] != NULL; i++)
784		scsi_host_put(lpfc_shost_from_vport(vports[i]));
785	kfree(vports);
786}
787
788
789/**
790 * lpfc_vport_reset_stat_data - Reset the statistical data for the vport
791 * @vport: Pointer to vport object.
792 *
793 * This function resets the statistical data for the vport. This function
794 * is called with the host_lock held
795 **/
796void
797lpfc_vport_reset_stat_data(struct lpfc_vport *vport)
798{
799	struct lpfc_nodelist *ndlp = NULL, *next_ndlp = NULL;
800
801	list_for_each_entry_safe(ndlp, next_ndlp, &vport->fc_nodes, nlp_listp) {
802		if (!NLP_CHK_NODE_ACT(ndlp))
803			continue;
804		if (ndlp->lat_data)
805			memset(ndlp->lat_data, 0, LPFC_MAX_BUCKET_COUNT *
806				sizeof(struct lpfc_scsicmd_bkt));
807	}
808}
809
810
811/**
812 * lpfc_alloc_bucket - Allocate data buffer required for statistical data
813 * @vport: Pointer to vport object.
814 *
815 * This function allocates data buffer required for all the FC
816 * nodes of the vport to collect statistical data.
817 **/
818void
819lpfc_alloc_bucket(struct lpfc_vport *vport)
820{
821	struct lpfc_nodelist *ndlp = NULL, *next_ndlp = NULL;
822
823	list_for_each_entry_safe(ndlp, next_ndlp, &vport->fc_nodes, nlp_listp) {
824		if (!NLP_CHK_NODE_ACT(ndlp))
825			continue;
826
827		kfree(ndlp->lat_data);
828		ndlp->lat_data = NULL;
829
830		if (ndlp->nlp_state == NLP_STE_MAPPED_NODE) {
831			ndlp->lat_data = kcalloc(LPFC_MAX_BUCKET_COUNT,
832					 sizeof(struct lpfc_scsicmd_bkt),
833					 GFP_ATOMIC);
834
835			if (!ndlp->lat_data)
836				lpfc_printf_vlog(vport, KERN_ERR, LOG_NODE,
837					"0287 lpfc_alloc_bucket failed to "
838					"allocate statistical data buffer DID "
839					"0x%x\n", ndlp->nlp_DID);
840		}
841	}
842}
843
844/**
845 * lpfc_free_bucket - Free data buffer required for statistical data
846 * @vport: Pointer to vport object.
847 *
848 * Th function frees statistical data buffer of all the FC
849 * nodes of the vport.
850 **/
851void
852lpfc_free_bucket(struct lpfc_vport *vport)
853{
854	struct lpfc_nodelist *ndlp = NULL, *next_ndlp = NULL;
855
856	list_for_each_entry_safe(ndlp, next_ndlp, &vport->fc_nodes, nlp_listp) {
857		if (!NLP_CHK_NODE_ACT(ndlp))
858			continue;
859
860		kfree(ndlp->lat_data);
861		ndlp->lat_data = NULL;
862	}
863}
864