Kconfig revision 880e96166c2cd1d84df0ccb02d413dcbf422796b
1config COMEDI 2 tristate "Data acquisition support (comedi)" 3 default N 4 depends on m 5 depends on BROKEN || FRV || M32R || MN10300 || SUPERH || TILE || X86 6 ---help--- 7 Enable support a wide range of data acquisition devices 8 for Linux. 9 10config COMEDI_DEBUG 11 bool "Comedi debugging" 12 depends on COMEDI != n 13 ---help--- 14 This is an option for use by developers; most people should 15 say N here. This enables comedi core and driver debugging. 16 17menuconfig COMEDI_MISC_DRIVERS 18 tristate "Comedi misc drivers" 19 depends on COMEDI 20 default N 21 ---help--- 22 Enable comedi misc drivers to be built 23 24 Note that the answer to this question won't directly affect the 25 kernel: saying N will just cause the configurator to skip all 26 the questions about misc non-hardware comedi drivers. 27 28if COMEDI_MISC_DRIVERS 29 30config COMEDI_KCOMEDILIB 31 tristate "Comedi kcomedilib" 32 ---help--- 33 Build the kcomedilib 34 35config COMEDI_BOND 36 tristate "Device bonding support" 37 depends on COMEDI_KCOMEDILIB 38 default N 39 ---help--- 40 Enable support for a driver to 'bond' (merge) multiple subdevices 41 from multiple devices together as one. 42 43 To compile this driver as a module, choose M here: the module will be 44 called comedi_bond. 45 46config COMEDI_TEST 47 tristate "Fake waveform generator support" 48 select COMEDI_FC 49 default N 50 ---help--- 51 Enable support for the fake waveform generator. 52 This driver is mainly for testing purposes, but can also be used to 53 generate sample waveforms on systems that don't have data acquisition 54 hardware. 55 56 To compile this driver as a module, choose M here: the module will be 57 called comedi_test. 58 59config COMEDI_PARPORT 60 tristate "Parallel port support" 61 default N 62 ---help--- 63 Enable support for the standard parallel port. 64 A cheap and easy way to get a few more digital I/O lines. Steal 65 additional parallel ports from old computers or your neighbors' 66 computers. 67 68 To compile this driver as a module, choose M here: the module will be 69 called comedi_parport. 70 71config COMEDI_SERIAL2002 72 tristate "Driver for serial connected hardware" 73 default N 74 ---help--- 75 Enable support for serial connected hardware 76 77 To compile this driver as a module, choose M here: the module will be 78 called serial2002. 79 80config COMEDI_SKEL 81 tristate "Comedi skeleton driver" 82 default N 83 ---help--- 84 Build the Skeleton driver, an example for driver writers 85 86 To compile this driver as a module, choose M here: the module will be 87 called skel. 88 89endif # COMEDI_MISC_DRIVERS 90 91menuconfig COMEDI_ISA_DRIVERS 92 tristate "Comedi ISA and PC/104 drivers" 93 depends on COMEDI && ISA 94 default N 95 ---help--- 96 Enable comedi ISA and PC/104 drivers to be built 97 98 Note that the answer to this question won't directly affect the 99 kernel: saying N will just cause the configurator to skip all 100 the questions about ISA and PC/104 comedi drivers. 101 102if COMEDI_ISA_DRIVERS && ISA 103 104config COMEDI_ACL7225B 105 tristate "ADlink NuDAQ ACL-7225b and compatibles support" 106 default N 107 ---help--- 108 Enable support for ADlink NuDAQ ACL-7225b and compatibles, 109 ADlink ACL-7225b (acl7225b), ICP P16R16DIO (p16r16dio) 110 111 To compile this driver as a module, choose M here: the module will be 112 called acl7225b. 113 114config COMEDI_PCL711 115 tristate "Advantech PCL-711/711b and ADlink ACL-8112 ISA card support" 116 default N 117 ---help--- 118 Enable support for Advantech PCL-711 and 711b, ADlink ACL-8112 119 120 To compile this driver as a module, choose M here: the module will be 121 called pcl711. 122 123config COMEDI_PCL724 124 tristate "Advantech PCL-722/724/731 and ADlink ACL-7122/7124/PET-48DIO" 125 select COMEDI_8255 126 default N 127 ---help--- 128 Enable support for Advantech PCL-724, PCL-722, PCL-731 and 129 ADlink ACL-7122, ACL-7124, PET-48DIO ISA cards 130 131 To compile this driver as a module, choose M here: the module will be 132 called pcl724. 133 134config COMEDI_PCL725 135 tristate "Advantech PCL-725 and compatible ISA card support" 136 default N 137 ---help--- 138 Enable support for Advantech PCL-725 and compatible ISA cards. 139 140 To compile this driver as a module, choose M here: the module will be 141 called pcl725. 142 143config COMEDI_PCL726 144 tristate "Advantech PCL-726 and compatible ISA card support" 145 default N 146 ---help--- 147 Enable support for Advantech PCL-726 and compatible ISA cards. 148 149 To compile this driver as a module, choose M here: the module will be 150 called pcl726. 151 152config COMEDI_PCL730 153 tristate "Advantech PCL-730 and ADlink ACL-7130 ISA card support" 154 default N 155 ---help--- 156 Enable support for Advantech PCL-730, ICP ISO-730 and ADlink 157 ACL-7130 ISA cards 158 159 To compile this driver as a module, choose M here: the module will be 160 called pcl730. 161 162config COMEDI_PCL812 163 tristate "Advantech PCL-812/813 and ADlink ACL-8112/8113/8113/8216" 164 depends on VIRT_TO_BUS 165 default N 166 ---help--- 167 Enable support for Advantech PCL-812/PG, PCL-813/B, ADLink 168 ACL-8112DG/HG/PG, ACL-8113, ACL-8216, ICP DAS A-821PGH/PGL/PGL-NDA, 169 A-822PGH/PGL, A-823PGH/PGL, A-826PG and ICP DAS ISO-813 ISA cards 170 171 To compile this driver as a module, choose M here: the module will be 172 called pcl812. 173 174config COMEDI_PCL816 175 tristate "Advantech PCL-814 and PCL-816 ISA card support" 176 depends on VIRT_TO_BUS 177 default N 178 ---help--- 179 Enable support for Advantech PCL-814 and PCL-816 ISA cards 180 181 To compile this driver as a module, choose M here: the module will be 182 called pcl816. 183 184config COMEDI_PCL818 185 tristate "Advantech PCL-718 and PCL-818 ISA card support" 186 depends on VIRT_TO_BUS 187 default N 188 ---help--- 189 Enable support for Advantech PCL-818 ISA cards 190 PCL-818L, PCL-818H, PCL-818HD, PCL-818HG, PCL-818 and PCL-718 191 192 To compile this driver as a module, choose M here: the module will be 193 called pcl818. 194 195config COMEDI_PCM3724 196 tristate "Advantech PCM-3724 PC/104 card support" 197 select COMEDI_8255 198 default N 199 ---help--- 200 Enable support for Advantech PCM-3724 PC/104 cards. 201 202 To compile this driver as a module, choose M here: the module will be 203 called pcm3724. 204 205config COMEDI_PCM3730 206 tristate "Advantech PCM-3730 and clone PC/104 board support" 207 default N 208 ---help--- 209 Enable support for Advantech PCM-3730 and clone PC/104 boards 210 211 To compile this driver as a module, choose M here: the module will be 212 called pcm3730. 213 214config COMEDI_RTI800 215 tristate "Analog Devices RTI-800/815 ISA card support" 216 default N 217 ---help--- 218 Enable support for Analog Devices RTI-800/815 ISA cards 219 220 To compile this driver as a module, choose M here: the module will be 221 called rti800. 222 223config COMEDI_RTI802 224 tristate "Analog Devices RTI-802 ISA card support" 225 default N 226 ---help--- 227 Enable support for Analog Devices RTI-802 ISA cards 228 229 To compile this driver as a module, choose M here: the module will be 230 called rti802. 231 232config COMEDI_DAS16M1 233 tristate "MeasurementComputing CIO-DAS16/M1DAS-16 ISA card support" 234 select COMEDI_8255 235 select COMEDI_FC 236 default N 237 ---help--- 238 Enable support for Measurement Computing CIO-DAS16/M1 ISA cards. 239 240 To compile this driver as a module, choose M here: the module will be 241 called das16m1. 242 243config COMEDI_DAS16 244 tristate "DAS-16 compatible ISA and PC/104 card support" 245 select COMEDI_8255 246 select COMEDI_FC 247 default N 248 ---help--- 249 Enable support for Keithley Metrabyte/ComputerBoards DAS16 250 and compatible ISA and PC/104 cards: 251 Keithley Metrabyte DAS-16, DAS-16G, DAS-16F, DAS-1201, DAS-1202, 252 DAS-1401, DAS-1402, DAS-1601, DAS-1602 and 253 ComputerBoards/MeasurementComputing PC104-DAS16/JR/, 254 PC104-DAS16JR/16, CIO-DAS16JR/16, CIO-DAS16/JR, CIO-DAS1401/12, 255 CIO-DAS1402/12, CIO-DAS1402/16, CIO-DAS1601/12, CIO-DAS1602/12, 256 CIO-DAS1602/16, CIO-DAS16/330 257 258 To compile this driver as a module, choose M here: the module will be 259 called das16. 260 261config COMEDI_DAS800 262 tristate "DAS800 and compatible ISA card support" 263 select COMEDI_FC 264 default N 265 ---help--- 266 Enable support for Keithley Metrabyte DAS800 and compatible ISA cards 267 Keithley Metrabyte DAS-800, DAS-801, DAS-802 268 Measurement Computing CIO-DAS800, CIO-DAS801, CIO-DAS802 and 269 CIO-DAS802/16 270 271 To compile this driver as a module, choose M here: the module will be 272 called das800. 273 274config COMEDI_DAS1800 275 tristate "DAS1800 and compatible ISA card support" 276 depends on VIRT_TO_BUS 277 select COMEDI_FC 278 default N 279 ---help--- 280 Enable support for DAS1800 and compatible ISA cards 281 Keithley Metrabyte DAS-1701ST, DAS-1701ST-DA, DAS-1701/AO, 282 DAS-1702ST, DAS-1702ST-DA, DAS-1702HR, DAS-1702HR-DA, DAS-1702/AO, 283 DAS-1801ST, DAS-1801ST-DA, DAS-1801HC, DAS-1801AO, DAS-1802ST, 284 DAS-1802ST-DA, DAS-1802HR, DAS-1802HR-DA, DAS-1802HC and 285 DAS-1802AO 286 287 To compile this driver as a module, choose M here: the module will be 288 called das1800. 289 290config COMEDI_DAS6402 291 tristate "DAS6402 and compatible ISA card support" 292 default N 293 ---help--- 294 Enable support for DAS6402 and compatible ISA cards 295 Computerboards, Keithley Metrabyte DAS6402 and compatibles 296 297 To compile this driver as a module, choose M here: the module will be 298 called das6402. 299 300config COMEDI_DT2801 301 tristate "Data Translation DT2801 ISA card support" 302 default N 303 ---help--- 304 Enable support for Data Translation DT2801 ISA cards 305 306 To compile this driver as a module, choose M here: the module will be 307 called dt2801. 308 309config COMEDI_DT2811 310 tristate "Data Translation DT2811 ISA card support" 311 default N 312 ---help--- 313 Enable support for Data Translation DT2811 ISA cards 314 315 To compile this driver as a module, choose M here: the module will be 316 called dt2811. 317 318config COMEDI_DT2814 319 tristate "Data Translation DT2814 ISA card support" 320 default N 321 ---help--- 322 Enable support for Data Translation DT2814 ISA cards 323 324 To compile this driver as a module, choose M here: the module will be 325 called dt2814. 326 327config COMEDI_DT2815 328 tristate "Data Translation DT2815 ISA card support" 329 default N 330 ---help--- 331 Enable support for Data Translation DT2815 ISA cards 332 333 To compile this driver as a module, choose M here: the module will be 334 called dt2815. 335 336config COMEDI_DT2817 337 tristate "Data Translation DT2817 ISA card support" 338 default N 339 ---help--- 340 Enable support for Data Translation DT2817 ISA cards 341 342 To compile this driver as a module, choose M here: the module will be 343 called dt2817. 344 345config COMEDI_DT282X 346 tristate "Data Translation DT2821 series and DT-EZ ISA card support" 347 select COMEDI_FC 348 depends on VIRT_TO_BUS 349 default N 350 ---help--- 351 Enable support for Data Translation DT2821 series including DT-EZ 352 DT2821, DT2821-F-16SE, DT2821-F-8DI, DT2821-G-16SE, DT2821-G-8DI, 353 DT2823 (dt2823), DT2824-PGH, DT2824-PGL, DT2825, DT2827, DT2828, 354 DT21-EZ, DT23-EZ, DT24-EZ and DT24-EZ-PGL 355 356 To compile this driver as a module, choose M here: the module will be 357 called dt282x. 358 359config COMEDI_DMM32AT 360 tristate "Diamond Systems MM-32-AT PC/104 board support" 361 default N 362 ---help--- 363 Enable support for Diamond Systems MM-32-AT PC/104 boards 364 365 To compile this driver as a module, choose M here: the module will be 366 called dmm32at. 367 368config COMEDI_FL512 369 tristate "FL512 ISA card support" 370 default N 371 ---help--- 372 Enable support for FL512 ISA card 373 374 To compile this driver as a module, choose M here: the module will be 375 called fl512. 376 377config COMEDI_AIO_AIO12_8 378 tristate "I/O Products PC/104 AIO12-8 Analog I/O Board support" 379 select COMEDI_8255 380 default N 381 ---help--- 382 Enable support for I/O Products PC/104 AIO12-8 Analog I/O Board 383 384 To compile this driver as a module, choose M here: the module will be 385 called aio_aio12_8. 386 387config COMEDI_AIO_IIRO_16 388 tristate "I/O Products PC/104 IIRO16 Board support" 389 default N 390 ---help--- 391 Enable support for I/O Products PC/104 IIRO16 Relay And Isolated 392 Input Board 393 394 To compile this driver as a module, choose M here: the module will be 395 called aio_iiro_16. 396 397config COMEDI_C6XDIGIO 398 tristate "Mechatronic Systems Inc. C6x_DIGIO DSP daughter card support" 399 default N 400 ---help--- 401 Enable support for Mechatronic Systems Inc. C6x_DIGIO DSP daughter 402 card 403 404 To compile this driver as a module, choose M here: the module will be 405 called c6xdigio. 406 407config COMEDI_MPC624 408 tristate "Micro/sys MPC-624 PC/104 board support" 409 default N 410 ---help--- 411 Enable support for Micro/sys MPC-624 PC/104 board 412 413 To compile this driver as a module, choose M here: the module will be 414 called mpc624. 415 416config COMEDI_ADQ12B 417 tristate "MicroAxial ADQ12-B data acquisition and control card support" 418 default N 419 ---help--- 420 Enable MicroAxial ADQ12-B daq and control card support. 421 422 To compile this driver as a module, choose M here: the module will be 423 called adq12b. 424 425config COMEDI_NI_AT_A2150 426 tristate "NI AT-A2150 ISA card support" 427 depends on COMEDI_NI_COMMON 428 depends on VIRT_TO_BUS 429 default N 430 ---help--- 431 Enable support for National Instruments AT-A2150 cards 432 433 To compile this driver as a module, choose M here: the module will be 434 called ni_at_a2150. 435 436config COMEDI_NI_AT_AO 437 tristate "NI AT-AO-6/10 EISA card support" 438 depends on COMEDI_NI_COMMON 439 default N 440 ---help--- 441 Enable support for National Instruments AT-AO-6/10 cards 442 443 To compile this driver as a module, choose M here: the module will be 444 called ni_at_ao. 445 446config COMEDI_NI_ATMIO 447 tristate "NI AT-MIO E series ISA-PNP card support" 448 depends on ISAPNP && COMEDI_NI_TIO && COMEDI_NI_COMMON 449 select COMEDI_8255 450 default N 451 ---help--- 452 Enable support for National Instruments AT-MIO E series cards 453 National Instruments AT-MIO-16E-1 (ni_atmio), 454 AT-MIO-16E-2, AT-MIO-16E-10, AT-MIO-16DE-10, AT-MIO-64E-3, 455 AT-MIO-16XE-50, AT-MIO-16XE-10, AT-AI-16XE-10 456 457 To compile this driver as a module, choose M here: the module will be 458 called ni_atmio. 459 460config COMEDI_NI_ATMIO16D 461 tristate "NI AT-MIO16/AT-MIO16D series ISA-PNP card support" 462 depends on ISAPNP && COMEDI_NI_COMMON 463 select COMEDI_8255 464 default N 465 ---help--- 466 Enable support for National Instruments AT-MIO16/AT-MIO16D cards. 467 468 To compile this driver as a module, choose M here: the module will be 469 called ni_atmio16d. 470 471config COMEDI_PCMAD 472 tristate "Winsystems PCM-A/D12 and PCM-A/D16 PC/104 board support" 473 default N 474 ---help--- 475 Enable support for Winsystems PCM-A/D12 and PCM-A/D16 PC/104 boards. 476 477 To compile this driver as a module, choose M here: the module will be 478 called pcmad. 479 480config COMEDI_PCMDA12 481 tristate "Winsystems PCM-D/A-12 8-channel AO PC/104 board support" 482 default N 483 ---help--- 484 Enable support for Winsystems PCM-D/A-12 8-channel AO PC/104 boards. 485 Note that the board is not ISA-PNP capable and thus needs the I/O 486 port comedi_config parameter. 487 488 To compile this driver as a module, choose M here: the module will be 489 called pcmda12. 490 491config COMEDI_PCMMIO 492 tristate "Winsystems PCM-MIO PC/104 board support" 493 default N 494 ---help--- 495 Enable support for Winsystems PCM-MIO multifunction PC/104 boards. 496 497 To compile this driver as a module, choose M here: the module will be 498 called pcmmio. 499 500config COMEDI_PCMUIO 501 tristate "Winsystems PCM-UIO48A and PCM-UIO96A PC/104 board support" 502 default N 503 ---help--- 504 Enable support for PCM-UIO48A and PCM-UIO96A PC/104 boards. 505 506 To compile this driver as a module, choose M here: the module will be 507 called pcmuio. 508 509config COMEDI_MULTIQ3 510 tristate "Quanser Consulting MultiQ-3 ISA card support" 511 default N 512 ---help--- 513 Enable support for Quanser Consulting MultiQ-3 ISA cards 514 515 To compile this driver as a module, choose M here: the module will be 516 called multiq3. 517 518config COMEDI_POC 519 tristate "Generic driver for very simple devices" 520 default N 521 ---help--- 522 Enable generic support for very simple / POC (Piece of Crap) boards, 523 Keithley Metrabyte DAC-02 (dac02), Advantech PCL-733 (pcl733) and 524 PCL-734 (pcl734) 525 526 To compile this driver as a module, choose M here: the module will be 527 called poc. 528 529endif # COMEDI_ISA_DRIVERS 530 531menuconfig COMEDI_PCI_DRIVERS 532 tristate "Comedi PCI drivers" 533 depends on COMEDI && PCI 534 default N 535 ---help--- 536 Enable comedi PCI drivers to be built 537 538 Note that the answer to this question won't directly affect the 539 kernel: saying N will just cause the configurator to skip all 540 the questions about PCI comedi drivers. 541 542if COMEDI_PCI_DRIVERS && PCI 543 544config COMEDI_ADDI_APCI_035 545 tristate "ADDI-DATA APCI_035 support" 546 depends on VIRT_TO_BUS 547 default N 548 ---help--- 549 Enable support for ADDI-DATA APCI_035 cards 550 551 To compile this driver as a module, choose M here: the module will be 552 called addi_apci_035. 553 554config COMEDI_ADDI_APCI_1032 555 tristate "ADDI-DATA APCI_1032 support" 556 depends on VIRT_TO_BUS 557 default N 558 ---help--- 559 Enable support for ADDI-DATA APCI_1032 cards 560 561 To compile this driver as a module, choose M here: the module will be 562 called addi_apci_1032. 563 564config COMEDI_ADDI_APCI_1500 565 tristate "ADDI-DATA APCI_1500 support" 566 depends on VIRT_TO_BUS 567 default N 568 ---help--- 569 Enable support for ADDI-DATA APCI_1500 cards 570 571 To compile this driver as a module, choose M here: the module will be 572 called addi_apci_1500. 573 574config COMEDI_ADDI_APCI_1516 575 tristate "ADDI-DATA APCI_1516 support" 576 depends on VIRT_TO_BUS 577 default N 578 ---help--- 579 Enable support for ADDI-DATA APCI_1516 cards 580 581 To compile this driver as a module, choose M here: the module will be 582 called addi_apci_1516. 583 584config COMEDI_ADDI_APCI_1564 585 tristate "ADDI-DATA APCI_1564 support" 586 depends on VIRT_TO_BUS 587 default N 588 ---help--- 589 Enable support for ADDI-DATA APCI_1564 cards 590 591 To compile this driver as a module, choose M here: the module will be 592 called addi_apci_1564. 593 594config COMEDI_ADDI_APCI_16XX 595 tristate "ADDI-DATA APCI_16xx support" 596 depends on VIRT_TO_BUS 597 default N 598 ---help--- 599 Enable support for ADDI-DATA APCI_16xx cards 600 601 To compile this driver as a module, choose M here: the module will be 602 called addi_apci_16xx. 603 604config COMEDI_ADDI_APCI_2016 605 tristate "ADDI-DATA APCI_2016 support" 606 depends on VIRT_TO_BUS 607 default N 608 ---help--- 609 Enable support for ADDI-DATA APCI_2016 cards 610 611 To compile this driver as a module, choose M here: the module will be 612 called addi_apci_2016. 613 614config COMEDI_ADDI_APCI_2032 615 tristate "ADDI-DATA APCI_2032 support" 616 depends on VIRT_TO_BUS 617 default N 618 ---help--- 619 Enable support for ADDI-DATA APCI_2032 cards 620 621 To compile this driver as a module, choose M here: the module will be 622 called addi_apci_2032. 623 624config COMEDI_ADDI_APCI_2200 625 tristate "ADDI-DATA APCI_2200 support" 626 depends on VIRT_TO_BUS 627 default N 628 ---help--- 629 Enable support for ADDI-DATA APCI_2200 cards 630 631 To compile this driver as a module, choose M here: the module will be 632 called addi_apci_2200. 633 634config COMEDI_ADDI_APCI_3001 635 tristate "ADDI-DATA APCI_3001 support" 636 depends on VIRT_TO_BUS 637 select COMEDI_FC 638 default N 639 ---help--- 640 Enable support for ADDI-DATA APCI_3001 cards 641 642 To compile this driver as a module, choose M here: the module will be 643 called addi_apci_3001. 644 645config COMEDI_ADDI_APCI_3120 646 tristate "ADDI-DATA APCI_3520 support" 647 depends on VIRT_TO_BUS 648 select COMEDI_FC 649 default N 650 ---help--- 651 Enable support for ADDI-DATA APCI_3520 cards 652 653 To compile this driver as a module, choose M here: the module will be 654 called addi_apci_3120. 655 656config COMEDI_ADDI_APCI_3501 657 tristate "ADDI-DATA APCI_3501 support" 658 depends on VIRT_TO_BUS 659 default N 660 ---help--- 661 Enable support for ADDI-DATA APCI_3501 cards 662 663 To compile this driver as a module, choose M here: the module will be 664 called addi_apci_3501. 665 666config COMEDI_ADDI_APCI_3XXX 667 tristate "ADDI-DATA APCI_3xxx support" 668 depends on VIRT_TO_BUS 669 default N 670 ---help--- 671 Enable support for ADDI-DATA APCI_3xxx cards 672 673 To compile this driver as a module, choose M here: the module will be 674 called addi_apci_3xxx. 675 676config COMEDI_ADL_PCI6208 677 tristate "ADLink PCI-6208A support" 678 select COMEDI_8255 679 default N 680 ---help--- 681 Enable support for ADLink PCI-6208A cards 682 683 To compile this driver as a module, choose M here: the module will be 684 called adl_pci6208. 685 686config COMEDI_ADL_PCI7230 687 tristate "ADLink PCI-7230 digital io board support" 688 default N 689 ---help--- 690 Enable support for ADlink PCI-7230 digital io board support 691 692 To compile this driver as a module, choose M here: the module will be 693 called adl_pci7230. 694 695config COMEDI_ADL_PCI7296 696 tristate "ADLink PCI-7296 96 ch. digital io board support" 697 default N 698 ---help--- 699 Enable support for ADlink PCI-7296 96 ch. digital io board support 700 701 To compile this driver as a module, choose M here: the module will be 702 called adl_pci7296. 703 704config COMEDI_ADL_PCI7432 705 tristate "ADLink PCI-7432 64 ch. isolated digital io board support" 706 default N 707 ---help--- 708 Enable support for ADlink PCI-7432 64 ch. isolated digital io board 709 710 To compile this driver as a module, choose M here: the module will be 711 called adl_pci7432. 712 713config COMEDI_ADL_PCI8164 714 tristate "ADLink PCI-8164 4 Axes Motion Control board support" 715 default N 716 ---help--- 717 Enable support for ADlink PCI-8164 4 Axes Motion Control board 718 719 To compile this driver as a module, choose M here: the module will be 720 called adl_pci8164. 721 722config COMEDI_ADL_PCI9111 723 tristate "ADLink PCI-9111HR support" 724 select COMEDI_FC 725 default N 726 ---help--- 727 Enable support for ADlink PCI9111 cards 728 729 To compile this driver as a module, choose M here: the module will be 730 called adl_pci9111. 731 732config COMEDI_ADL_PCI9118 733 tristate "ADLink PCI-9118DG, PCI-9118HG, PCI-9118HR support" 734 select COMEDI_FC 735 depends on VIRT_TO_BUS 736 default N 737 ---help--- 738 Enable support for ADlink PCI-9118DG, PCI-9118HG, PCI-9118HR cards 739 740 To compile this driver as a module, choose M here: the module will be 741 called adl_pci9118. 742 743config COMEDI_ADV_PCI1710 744 tristate "Advantech PCI-171x, PCI-1720 and PCI-1731 support" 745 default N 746 ---help--- 747 Enable support for Advantech PCI-1710, PCI-1710HG, PCI-1711, 748 PCI-1713, PCI-1720 and PCI-1731 749 750 To compile this driver as a module, choose M here: the module will be 751 called adv_pci1710. 752 753config COMEDI_ADV_PCI1723 754 tristate "Advantech PCI-1723 support" 755 default N 756 ---help--- 757 Enable support for Advantech PCI-1723 cards 758 759 To compile this driver as a module, choose M here: the module will be 760 called adv_pci1723. 761 762config COMEDI_ADV_PCI_DIO 763 tristate "Advantech PCI DIO card support" 764 select COMEDI_8255 765 default N 766 ---help--- 767 Enable support for Advantech PCI DIO cards 768 PCI-1730, PCI-1733, PCI-1734, PCI-1736UP, PCI-1750, PCI-1751, 769 PCI-1752, PCI-1753/E, PCI-1754, PCI-1756 and PCI-1762 770 771 To compile this driver as a module, choose M here: the module will be 772 called adv_pci_dio. 773 774config COMEDI_AMPLC_DIO200 775 tristate "Amplicon PC272E and PCI272 DIO board support" 776 select COMEDI_8255 777 default N 778 ---help--- 779 Enable support for Amplicon PC272E and PCI272 DIO boards 780 781 To compile this driver as a module, choose M here: the module will be 782 called amplc_dio200. 783 784config COMEDI_AMPLC_PC236 785 tristate "Amplicon PC36AT and PCI236 DIO board support" 786 select COMEDI_8255 787 default N 788 ---help--- 789 Enable support for Amplicon PC36AT and PCI236 DIO boards 790 791 To compile this driver as a module, choose M here: the module will be 792 called amplc_pc236. 793 794config COMEDI_AMPLC_PC263 795 tristate "Amplicon PC263 and PCI263 relay board support" 796 default N 797 ---help--- 798 Enable support for Amplicon PC263 and PCI263 relay boards 799 800 To compile this driver as a module, choose M here: the module will be 801 called amplc_pc263. 802 803config COMEDI_AMPLC_PCI224 804 tristate "Amplicon PCI224 and PCI234 support" 805 select COMEDI_FC 806 default N 807 ---help--- 808 Enable support for Amplicon PCI224 and PCI234 AO boards 809 810 To compile this driver as a module, choose M here: the module will be 811 called amplc_pci224. 812 813config COMEDI_AMPLC_PCI230 814 tristate "Amplicon PCI230 and PCI260 support" 815 select COMEDI_8255 816 default N 817 ---help--- 818 Enable support for Amplicon PCI230 and PCI260 Multifunction I/O 819 boards 820 821 To compile this driver as a module, choose M here: the module will be 822 called amplc_pci230. 823 824config COMEDI_CONTEC_PCI_DIO 825 tristate "Contec PIO1616L digital I/O board support" 826 default N 827 ---help--- 828 Enable support for the Contec PIO1616L digital I/O board 829 830 To compile this driver as a module, choose M here: the module will be 831 called contec_pci_dio. 832 833config COMEDI_DT3000 834 tristate "Data Translation DT3000 series support" 835 default N 836 ---help--- 837 Enable support for Data Translation DT3000 series 838 DT3001, DT3001-PGL, DT3002, DT3003, DT3003-PGL, DT3004, DT3005 and 839 DT3004-200 840 841 To compile this driver as a module, choose M here: the module will be 842 called dt3000. 843 844config COMEDI_DYNA_PCI10XX 845 tristate "Dynalog PCI DAQ series support" 846 default N 847 ---help--- 848 Enable support for Dynalog PCI DAQ series 849 PCI-1050 850 851 To compile this driver as a module, choose M here: the module will be 852 called dyna_pci10xx. 853 854config COMEDI_UNIOXX5 855 tristate "Fastwel UNIOxx-5 analog and digital io board support" 856 default N 857 ---help--- 858 Enable support for Fastwel UNIOxx-5 (analog and digital i/o) boards 859 860 To compile this driver as a module, choose M here: the module will be 861 called unioxx5. 862 863config COMEDI_GSC_HPDI 864 tristate "General Standards PCI-HPDI32 / PMC-HPDI32 support" 865 select COMEDI_FC 866 default N 867 ---help--- 868 Enable support for General Standards Corporation high speed parallel 869 digital interface rs485 boards PCI-HPDI32 and PMC-HPDI32. 870 Only receive mode works, transmit not supported. 871 872 To compile this driver as a module, choose M here: the module will be 873 called gsc_hpdi. 874 875config COMEDI_ICP_MULTI 876 tristate "Inova ICP_MULTI support" 877 default N 878 ---help--- 879 Enable support for Inova ICP_MULTI card 880 881 To compile this driver as a module, choose M here: the module will be 882 called icp_multi. 883 884config COMEDI_II_PCI20KC 885 tristate "Intelligent Instruments PCI-20001C carrier support" 886 default N 887 ---help--- 888 Enable support for Intelligent Instruments PCI-20001C carrier 889 PCI-20001, PCI-20006 and PCI-20341 890 891 To compile this driver as a module, choose M here: the module will be 892 called ii_pci20kc. 893 894config COMEDI_DAQBOARD2000 895 tristate "IOtech DAQboard/2000 support" 896 select COMEDI_8255 897 default N 898 ---help--- 899 Enable support for the IOtech DAQboard/2000 900 901 To compile this driver as a module, choose M here: the module will be 902 called daqboard2000. 903 904config COMEDI_JR3_PCI 905 tristate "JR3/PCI force sensor board support" 906 default N 907 ---help--- 908 Enable support for JR3/PCI force sensor boards 909 910 To compile this driver as a module, choose M here: the module will be 911 called jr3_pci. 912 913config COMEDI_KE_COUNTER 914 tristate "Kolter-Electronic PCI Counter 1 card support" 915 default N 916 ---help--- 917 Enable support for Kolter-Electronic PCI Counter 1 cards 918 919 To compile this driver as a module, choose M here: the module will be 920 called ke_counter. 921 922config COMEDI_CB_PCIDAS64 923 tristate "MeasurementComputing PCI-DAS 64xx, 60xx, and 4020 support" 924 select COMEDI_8255 925 select COMEDI_FC 926 default N 927 ---help--- 928 Enable support for ComputerBoards/MeasurementComputing PCI-DAS 64xx, 929 60xx, and 4020 series with the PLX 9080 PCI controller 930 931 To compile this driver as a module, choose M here: the module will be 932 called cb_pcidas64. 933 934config COMEDI_CB_PCIDAS 935 tristate "MeasurementComputing PCI-DAS support" 936 select COMEDI_8255 937 select COMEDI_FC 938 default N 939 ---help--- 940 Enable support for ComputerBoards/MeasurementComputing PCI-DAS with 941 AMCC S5933 PCIcontroller: PCI-DAS1602/16, PCI-DAS1602/16jr, 942 PCI-DAS1602/12, PCI-DAS1200, PCI-DAS1200jr, PCI-DAS1000, PCI-DAS1001 943 and PCI_DAS1002. 944 945 To compile this driver as a module, choose M here: the module will be 946 called cb_pcidas. 947 948config COMEDI_CB_PCIDDA 949 tristate "MeasurementComputing PCI-DDA series support" 950 select COMEDI_8255 951 default N 952 ---help--- 953 Enable support for ComputerBoards/MeasurementComputing PCI-DDA 954 series: PCI-DDA08/12, PCI-DDA04/12, PCI-DDA02/12, PCI-DDA08/16, 955 PCI-DDA04/16 and PCI-DDA02/16 956 957 To compile this driver as a module, choose M here: the module will be 958 called cb_pcidda. 959 960config COMEDI_CB_PCIDIO 961 tristate "MeasurementComputing PCI-DIO series support" 962 select COMEDI_8255 963 default N 964 ---help--- 965 Enable support for ComputerBoards/MeasurementComputing PCI-DIO series 966 PCI-DIO24, PCI-DIO24H and PCI-DIO48H 967 968 To compile this driver as a module, choose M here: the module will be 969 called cb_pcidio. 970 971config COMEDI_CB_PCIMDAS 972 tristate "MeasurementComputing PCIM-DAS1602/16 support" 973 select COMEDI_8255 974 default N 975 ---help--- 976 Enable support for ComputerBoards/MeasurementComputing PCI Migration 977 series PCIM-DAS1602/16 978 979 To compile this driver as a module, choose M here: the module will be 980 called cb_pcimdas. 981 982config COMEDI_CB_PCIMDDA 983 tristate "MeasurementComputing PCIM-DDA06-16 support" 984 select COMEDI_8255 985 default N 986 ---help--- 987 Enable support for ComputerBoards/MeasurementComputing PCIM-DDA06-16 988 989 To compile this driver as a module, choose M here: the module will be 990 called cb_pcimdda. 991 992config COMEDI_ME4000 993 tristate "Meilhaus ME-4000 support" 994 default N 995 ---help--- 996 Enable support for Meilhaus PCI data acquisition cards 997 ME-4650, ME-4670i, ME-4680, ME-4680i and ME-4680is 998 999 To compile this driver as a module, choose M here: the module will be 1000 called me4000. 1001 1002config COMEDI_ME_DAQ 1003 tristate "Meilhaus ME-2000i, ME-2600i, ME-3000vm1 support" 1004 default N 1005 ---help--- 1006 Enable support for Meilhaus PCI data acquisition cards 1007 ME-2000i, ME-2600i and ME-3000vm1 1008 1009 To compile this driver as a module, choose M here: the module will be 1010 called me_daq. 1011 1012config COMEDI_NI_6527 1013 tristate "NI 6527 support" 1014 depends on COMEDI_MITE 1015 default N 1016 ---help--- 1017 Enable support for the National Instruments 6527 PCI card 1018 1019 To compile this driver as a module, choose M here: the module will be 1020 called ni_6527. 1021 1022config COMEDI_NI_65XX 1023 tristate "NI 65xx static dio PCI card support" 1024 depends on COMEDI_MITE 1025 default N 1026 ---help--- 1027 Enable support for National Instruments 65xx static dio boards. 1028 Supported devices: National Instruments PCI-6509 (ni_65xx), 1029 PXI-6509, PCI-6510, PCI-6511, PXI-6511, PCI-6512, PXI-6512, PCI-6513, 1030 PXI-6513, PCI-6514, PXI-6514, PCI-6515, PXI-6515, PCI-6516, PCI-6517, 1031 PCI-6518, PCI-6519, PCI-6520, PCI-6521, PXI-6521, PCI-6528, PXI-6528 1032 1033 To compile this driver as a module, choose M here: the module will be 1034 called ni_65xx. 1035 1036config COMEDI_NI_660X 1037 tristate "NI 660x counter/timer PCI card support" 1038 depends on COMEDI_NI_TIO && COMEDI_NI_COMMON 1039 default N 1040 ---help--- 1041 Enable support for National Instruments PCI-6601 (ni_660x), PCI-6602, 1042 PXI-6602 and PXI-6608. 1043 1044 To compile this driver as a module, choose M here: the module will be 1045 called ni_660x. 1046 1047config COMEDI_NI_670X 1048 tristate "NI 670x PCI card support" 1049 depends on COMEDI_MITE 1050 default N 1051 ---help--- 1052 Enable support for National Instruments PCI-6703 and PCI-6704 1053 1054 To compile this driver as a module, choose M here: the module will be 1055 called ni_670x. 1056 1057config COMEDI_NI_PCIDIO 1058 tristate "NI PCI-DIO32HS, PCI-DIO96, PCI-6533, PCI-6503 support" 1059 depends on COMEDI_MITE 1060 select COMEDI_8255 1061 default N 1062 ---help--- 1063 Enable support for National Instruments PCI-DIO-32HS, PXI-6533, 1064 PCI-DIO-96, PCI-DIO-96B, PXI-6508, PCI-6503, PCI-6503B, PCI-6503X, 1065 PXI-6503, PCI-6533 and PCI-6534 1066 The DIO-96 appears as four 8255 subdevices. See the 8255 1067 driver notes for details. 1068 1069 To compile this driver as a module, choose M here: the module will be 1070 called ni_pcidio. 1071 1072config COMEDI_NI_PCIMIO 1073 tristate "NI PCI-MIO-E series and M series support" 1074 depends on COMEDI_NI_TIO && COMEDI_NI_COMMON 1075 select COMEDI_8255 1076 select COMEDI_FC 1077 default N 1078 ---help--- 1079 Enable support for National Instruments PCI-MIO-E series and M series 1080 (all boards): PCI-MIO-16XE-10, PXI-6030E, PCI-MIO-16E-1, 1081 PCI-MIO-16E-4, PCI-6014, PCI-6040E, PXI-6040E, PCI-6030E, PCI-6031E, 1082 PCI-6032E, PCI-6033E, PCI-6071E, PCI-6023E, PCI-6024E, PCI-6025E, 1083 PXI-6025E, PCI-6034E, PCI-6035E, PCI-6052E, PCI-6110, PCI-6111, 1084 PCI-6220, PCI-6221, PCI-6224, PXI-6224, PCI-6225, PXI-6225, PCI-6229, 1085 PCI-6250, PCI-6251, PCIe-6251, PCI-6254, PCI-6259, PCIe-6259, 1086 PCI-6280, PCI-6281, PXI-6281, PCI-6284, PCI-6289, PCI-6711, PXI-6711, 1087 PCI-6713, PXI-6713, PXI-6071E, PCI-6070E, PXI-6070E, PXI-6052E, 1088 PCI-6036E, PCI-6731, PCI-6733, PXI-6733, PCI-6143, PXI-6143 1089 1090 To compile this driver as a module, choose M here: the module will be 1091 called ni_pcimio. 1092 1093config COMEDI_RTD520 1094 tristate "Real Time Devices PCI4520/DM7520 support" 1095 select COMEDI_8255 1096 default N 1097 ---help--- 1098 Enable support for Real Time Devices PCI4520/DM7520 1099 1100 To compile this driver as a module, choose M here: the module will be 1101 called rtd520. 1102 1103config COMEDI_S526 1104 tristate "Sensoray s526 support" 1105 default N 1106 ---help--- 1107 Enable support for Sensoray s526 1108 1109 To compile this driver as a module, choose M here: the module will be 1110 called s526. 1111 1112config COMEDI_S626 1113 tristate "Sensoray 626 support" 1114 select COMEDI_FC 1115 default N 1116 ---help--- 1117 Enable support for Sensoray 626 1118 1119 To compile this driver as a module, choose M here: the module will be 1120 called s626. 1121 1122config COMEDI_SSV_DNP 1123 tristate "SSV Embedded Systems DIL/Net-PC support" 1124 default N 1125 ---help--- 1126 Enable support for SSV Embedded Systems DIL/Net-PC 1127 1128 To compile this driver as a module, choose M here: the module will be 1129 called ssv_dnp. 1130 1131endif # COMEDI_PCI_DRIVERS 1132 1133menuconfig COMEDI_PCMCIA_DRIVERS 1134 tristate "Comedi PCMCIA drivers" 1135 depends on COMEDI && (PCMCIA || PCCARD) 1136 default N 1137 ---help--- 1138 Enable comedi PCMCIA and PCCARD drivers to be built 1139 1140 Note that the answer to this question won't directly affect the 1141 kernel: saying N will just cause the configurator to skip all 1142 the questions about PCMCIA comedi drivers. 1143 1144if COMEDI_PCMCIA_DRIVERS && PCMCIA 1145 1146config COMEDI_CB_DAS16_CS 1147 tristate "CB DAS16 series PCMCIA support" 1148 default N 1149 ---help--- 1150 Enable support for the ComputerBoards/MeasurementComputing PCMCIA 1151 cards DAS16/16, PCM-DAS16D/12 and PCM-DAS16s/16 1152 1153 To compile this driver as a module, choose M here: the module will be 1154 called cb_das16_cs. 1155 1156config COMEDI_DAS08_CS 1157 tristate "CB DAS08 PCMCIA support" 1158 select COMEDI_DAS08 1159 default N 1160 ---help--- 1161 Enable support for the ComputerBoards/MeasurementComputing DAS-08 1162 PCMCIA card 1163 1164 To compile this driver as a module, choose M here: the module will be 1165 called das08_cs. 1166 1167config COMEDI_NI_DAQ_700_CS 1168 tristate "NI DAQCard-700 PCMCIA support" 1169 depends on COMEDI_NI_COMMON 1170 default N 1171 ---help--- 1172 Enable support for the National Instruments PCMCIA DAQCard-700 DIO 1173 1174 To compile this driver as a module, choose M here: the module will be 1175 called ni_daq_700. 1176 1177config COMEDI_NI_DAQ_DIO24_CS 1178 tristate "NI DAQ-Card DIO-24 PCMCIA support" 1179 depends on COMEDI_NI_COMMON 1180 select COMEDI_8255 1181 default N 1182 ---help--- 1183 Enable support for the National Instruments PCMCIA DAQ-Card DIO-24 1184 1185 To compile this driver as a module, choose M here: the module will be 1186 called ni_daq_dio24. 1187 1188config COMEDI_NI_LABPC_CS 1189 tristate "NI DAQCard-1200 PCMCIA support" 1190 depends on COMEDI_NI_LABPC 1191 default N 1192 ---help--- 1193 Enable support for the National Instruments PCMCIA DAQCard-1200 1194 1195 To compile this driver as a module, choose M here: the module will be 1196 called ni_labpc_cs. 1197 1198config COMEDI_NI_MIO_CS 1199 tristate "NI DAQCard E series PCMCIA support" 1200 depends on COMEDI_NI_TIO && COMEDI_NI_COMMON 1201 select COMEDI_8255 1202 select COMEDI_FC 1203 default N 1204 ---help--- 1205 Enable support for the National Instruments PCMCIA DAQCard E series 1206 DAQCard-ai-16xe-50, DAQCard-ai-16e-4, DAQCard-6062E, DAQCard-6024E 1207 and DAQCard-6036E 1208 1209 To compile this driver as a module, choose M here: the module will be 1210 called ni_mio_cs. 1211 1212config COMEDI_QUATECH_DAQP_CS 1213 tristate "Quatech DAQP PCMCIA data capture card support" 1214 default N 1215 ---help--- 1216 Enable support for the Quatech DAQP PCMCIA data capture cards 1217 DAQP-208 and DAQP-308 1218 1219 To compile this driver as a module, choose M here: the module will be 1220 called quatech_daqp_cs. 1221 1222endif # COMEDI_PCMCIA_DRIVERS 1223 1224menuconfig COMEDI_USB_DRIVERS 1225 tristate "Comedi USB drivers" 1226 depends on COMEDI && USB 1227 default N 1228 ---help--- 1229 Enable comedi USB drivers to be built 1230 1231 Note that the answer to this question won't directly affect the 1232 kernel: saying N will just cause the configurator to skip all 1233 the questions about USB comedi drivers. 1234 1235if COMEDI_USB_DRIVERS && USB 1236 1237config COMEDI_DT9812 1238 tristate "DataTranslation DT9812 USB module support" 1239 default N 1240 ---help--- 1241 Enable support for the Data Translation DT9812 USB module 1242 1243 To compile this driver as a module, choose M here: the module will be 1244 called dt9812. 1245 1246config COMEDI_USBDUX 1247 tristate "ITL USBDUX support" 1248 default N 1249 ---help--- 1250 Enable support for the University of Stirling USB DAQ and INCITE 1251 Technology Limited driver 1252 1253 To compile this driver as a module, choose M here: the module will be 1254 called usbdux. 1255 1256config COMEDI_USBDUXFAST 1257 tristate "ITL USB-DUXfast support" 1258 select COMEDI_FC 1259 default N 1260 ---help--- 1261 Enable support for the University of Stirling USB-DUXfast and INCITE 1262 Technology Limited driver 1263 1264 To compile this driver as a module, choose M here: the module will be 1265 called usbduxfast. 1266 1267config COMEDI_VMK80XX 1268 tristate "Velleman VM110/VM140 USB Board support" 1269 default N 1270 ---help--- 1271 Build the Velleman USB Board Low-Level Driver supporting the 1272 K8055/K8061 aka VM110/VM140 devices 1273 1274 To compile this driver as a module, choose M here: the module will be 1275 called vmk80xx. 1276 1277endif # COMEDI_USB_DRIVERS 1278 1279menuconfig COMEDI_NI_COMMON 1280 tristate "Comedi National Instruments card support" 1281 depends on COMEDI 1282 default N 1283 ---help--- 1284 Enable comedi support for National Instruments cards. 1285 Modules in this section are used by many comedi NI drivers. 1286 1287 Note that the answer to this question won't directly affect the 1288 kernel: saying N will just cause the configurator to skip all 1289 the questions about National Instruments cards. 1290 1291if COMEDI_NI_COMMON 1292 1293config COMEDI_MITE 1294 tristate "NI Mite PCI interface chip support" 1295 depends on PCI 1296 default N 1297 ---help--- 1298 Enable support for National Instruments Mite PCI interface chip 1299 1300 To compile this driver as a module, choose M here: the module will be 1301 called mite. 1302 1303config COMEDI_NI_TIO 1304 tristate "NI general purpose counter support" 1305 depends on COMEDI_MITE 1306 default N 1307 ---help--- 1308 Enable support for National Instruments general purpose counters. 1309 This module is not used directly by end-users. Rather, it 1310 is used by other drivers (for example ni_660x and ni_pcimio) 1311 to provide support for NI's general purpose counters. 1312 1313 To compile this driver as a modules, choose M here: two modules will 1314 be build: ni_tio and ni_tiocmd. 1315 1316config COMEDI_NI_LABPC 1317 tristate "NI Lab-PC and compatibles ISA and PCI support" 1318 depends on COMEDI_MITE 1319 select COMEDI_8255 1320 select COMEDI_FC 1321 depends on VIRT_TO_BUS 1322 default N 1323 ---help--- 1324 Enable support for National Instruments Lab-PC and compatibles 1325 Lab-PC-1200, Lab-PC-1200AI, Lab-PC+ and PCI-1200. 1326 Kernel-level ISA plug-and-play support for the lab-pc-1200 boards has 1327 not yet been added to the driver. 1328 1329 To compile this driver as a module, choose M here: the module will be 1330 called ni_labpc. 1331 1332endif # COMEDI_NI_COMMON 1333 1334config COMEDI_8255 1335 tristate "Generic 8255 support" 1336 depends on COMEDI 1337 default N 1338 ---help--- 1339 Enable generic 8255 support. 1340 1341 You should enable compilation this driver if you plan to use a board 1342 that has an 8255 chip. For multifunction boards, the main driver will 1343 configure the 8255 subdevice automatically. 1344 1345 Note that most PCI 8255 boards do NOT work with this driver, and 1346 need a separate driver as a wrapper. 1347 1348 To compile this driver as a module, choose M here: the module will be 1349 called 8255. 1350 1351config COMEDI_DAS08 1352 tristate "DAS-08 compatible support" 1353 depends on COMEDI 1354 select COMEDI_8255 1355 default N 1356 ---help--- 1357 Enable support for DAS08 and compatible ISA, PC/104 and PCI cards. 1358 1359 Note that PCMCIA DAS08 cards are not directly supported by this 1360 driver, and need a separate driver as a wrapper. 1361 1362 To compile this driver as a module, choose M here: the module will be 1363 called das08. 1364 1365config COMEDI_FC 1366 tristate "Comedi shared functions for low-level driver support" 1367 depends on COMEDI 1368 default N 1369 ---help--- 1370 Enable support for shared functions for low-level drivers. 1371 This module is not used directly by end-users. Rather, it 1372 is used by many other comedi drivers. 1373 1374 To compile this driver as a module, choose M here: the module will be 1375 called comedi_fc. 1376